diff options
| -rw-r--r-- | Documentation/input/event-codes.txt | 4 | ||||
| -rw-r--r-- | drivers/input/joystick/xpad.c | 2 | ||||
| -rw-r--r-- | drivers/input/misc/arizona-haptics.c | 1 | ||||
| -rw-r--r-- | drivers/input/misc/pmic8xxx-pwrkey.c | 7 | ||||
| -rw-r--r-- | drivers/input/misc/twl4030-vibra.c | 1 | ||||
| -rw-r--r-- | drivers/input/misc/twl6040-vibra.c | 8 | ||||
| -rw-r--r-- | drivers/input/tablet/gtco.c | 10 |
7 files changed, 20 insertions, 13 deletions
diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt index 3f0f5ce3338b..36ea940e5bb9 100644 --- a/Documentation/input/event-codes.txt +++ b/Documentation/input/event-codes.txt @@ -173,6 +173,10 @@ A few EV_ABS codes have special meanings: proximity of the device and while the value of the BTN_TOUCH code is 0. If the input device may be used freely in three dimensions, consider ABS_Z instead. + - BTN_TOOL_<name> should be set to 1 when the tool comes into detectable + proximity and set to 0 when the tool leaves detectable proximity. + BTN_TOOL_<name> signals the type of tool that is currently detected by the + hardware and is otherwise independent of ABS_DISTANCE and/or BTN_TOUCH. * ABS_MT_<name>: - Used to describe multitouch input events. Please see diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index e8a84d12b7ff..1142a93dd90b 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -153,6 +153,7 @@ static const struct xpad_device { { 0x0738, 0x4728, "Mad Catz Street Fighter IV FightPad", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0x4738, "Mad Catz Wired Xbox 360 Controller (SFIV)", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x0738, 0x4740, "Mad Catz Beat Pad", 0, XTYPE_XBOX360 }, + { 0x0738, 0x4a01, "Mad Catz FightStick TE 2", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0738, 0xb726, "Mad Catz Xbox controller - MW2", 0, XTYPE_XBOX360 }, { 0x0738, 0xbeef, "Mad Catz JOYTECH NEO SE Advanced GamePad", XTYPE_XBOX360 }, @@ -304,6 +305,7 @@ static struct usb_device_id xpad_table[] = { XPAD_XBOX360_VENDOR(0x046d), /* Logitech X-Box 360 style controllers */ XPAD_XBOX360_VENDOR(0x0738), /* Mad Catz X-Box 360 controllers */ { USB_DEVICE(0x0738, 0x4540) }, /* Mad Catz Beat Pad */ + XPAD_XBOXONE_VENDOR(0x0738), /* Mad Catz FightStick TE 2 */ XPAD_XBOX360_VENDOR(0x0e6f), /* 0x0e6f X-Box 360 controllers */ XPAD_XBOX360_VENDOR(0x12ab), /* X-Box 360 dance pads */ XPAD_XBOX360_VENDOR(0x1430), /* RedOctane X-Box 360 controllers */ diff --git a/drivers/input/misc/arizona-haptics.c b/drivers/input/misc/arizona-haptics.c index d5994a745ffa..982936334537 100644 --- a/drivers/input/misc/arizona-haptics.c +++ b/drivers/input/misc/arizona-haptics.c @@ -178,7 +178,6 @@ static int arizona_haptics_probe(struct platform_device *pdev) input_set_drvdata(haptics->input_dev, haptics); haptics->input_dev->name = "arizona:haptics"; - haptics->input_dev->dev.parent = pdev->dev.parent; haptics->input_dev->close = arizona_haptics_close; __set_bit(FF_RUMBLE, haptics->input_dev->ffbit); diff --git a/drivers/input/misc/pmic8xxx-pwrkey.c b/drivers/input/misc/pmic8xxx-pwrkey.c index 3f02e0e03d12..67aab86048ad 100644 --- a/drivers/input/misc/pmic8xxx-pwrkey.c +++ b/drivers/input/misc/pmic8xxx-pwrkey.c @@ -353,7 +353,8 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev) if (of_property_read_u32(pdev->dev.of_node, "debounce", &kpd_delay)) kpd_delay = 15625; - if (kpd_delay > 62500 || kpd_delay == 0) { + /* Valid range of pwr key trigger delay is 1/64 sec to 2 seconds. */ + if (kpd_delay > USEC_PER_SEC * 2 || kpd_delay < USEC_PER_SEC / 64) { dev_err(&pdev->dev, "invalid power key trigger delay\n"); return -EINVAL; } @@ -385,8 +386,8 @@ static int pmic8xxx_pwrkey_probe(struct platform_device *pdev) pwr->name = "pmic8xxx_pwrkey"; pwr->phys = "pmic8xxx_pwrkey/input0"; - delay = (kpd_delay << 10) / USEC_PER_SEC; - delay = 1 + ilog2(delay); + delay = (kpd_delay << 6) / USEC_PER_SEC; + delay = ilog2(delay); err = regmap_read(regmap, PON_CNTL_1, &pon_cntl); if (err < 0) { diff --git a/drivers/input/misc/twl4030-vibra.c b/drivers/input/misc/twl4030-vibra.c index 10c4e3d462f1..caa5a62c42fb 100644 --- a/drivers/input/misc/twl4030-vibra.c +++ b/drivers/input/misc/twl4030-vibra.c @@ -222,7 +222,6 @@ static int twl4030_vibra_probe(struct platform_device *pdev) info->input_dev->name = "twl4030:vibrator"; info->input_dev->id.version = 1; - info->input_dev->dev.parent = pdev->dev.parent; info->input_dev->close = twl4030_vibra_close; __set_bit(FF_RUMBLE, info->input_dev->ffbit); diff --git a/drivers/input/misc/twl6040-vibra.c b/drivers/input/misc/twl6040-vibra.c index ea63fad48de6..53e33fab3f7a 100644 --- a/drivers/input/misc/twl6040-vibra.c +++ b/drivers/input/misc/twl6040-vibra.c @@ -45,7 +45,6 @@ struct vibra_info { struct device *dev; struct input_dev *input_dev; - struct workqueue_struct *workqueue; struct work_struct play_work; struct mutex mutex; int irq; @@ -213,11 +212,7 @@ static int vibra_play(struct input_dev *input, void *data, info->strong_speed = effect->u.rumble.strong_magnitude; info->direction = effect->direction < EFFECT_DIR_180_DEG ? 1 : -1; - ret = queue_work(info->workqueue, &info->play_work); - if (!ret) { - dev_info(&input->dev, "work is already on queue\n"); - return ret; - } + schedule_work(&info->play_work); return 0; } @@ -362,7 +357,6 @@ static int twl6040_vibra_probe(struct platform_device *pdev) info->input_dev->name = "twl6040:vibrator"; info->input_dev->id.version = 1; - info->input_dev->dev.parent = pdev->dev.parent; info->input_dev->close = twl6040_vibra_close; __set_bit(FF_RUMBLE, info->input_dev->ffbit); diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c index 3a7f3a4a4396..7c18249d6c8e 100644 --- a/drivers/input/tablet/gtco.c +++ b/drivers/input/tablet/gtco.c @@ -858,6 +858,14 @@ static int gtco_probe(struct usb_interface *usbinterface, goto err_free_buf; } + /* Sanity check that a device has an endpoint */ + if (usbinterface->altsetting[0].desc.bNumEndpoints < 1) { + dev_err(&usbinterface->dev, + "Invalid number of endpoints\n"); + error = -EINVAL; + goto err_free_urb; + } + /* * The endpoint is always altsetting 0, we know this since we know * this device only has one interrupt endpoint @@ -879,7 +887,7 @@ static int gtco_probe(struct usb_interface *usbinterface, * HID report descriptor */ if (usb_get_extra_descriptor(usbinterface->cur_altsetting, - HID_DEVICE_TYPE, &hid_desc) != 0){ + HID_DEVICE_TYPE, &hid_desc) != 0) { dev_err(&usbinterface->dev, "Can't retrieve exta USB descriptor to get hid report descriptor length\n"); error = -EIO; |