| Age | Commit message (Collapse) | Author |
|---|
|
Used by SystemTap.
Patch generated by diff of 2.6.37 base and utrace branches of the
official utrace git repo at:
git://git.kernel.org/pub/scm/linux/kernel/git/frob/linux-2.6-utrace.git
Integrated-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Starting with 4.4, gcc will happily accept -Wno-<anything> in the
cc-option test and complain later when compiling a file that has some
other warning. This rather unexpected behavior is intentional as per
http://gcc.gnu.org/PR28322, so work around it by testing for support of
the opposite option (without the no-). Introduce a new Makefile function
cc-disable-warning that does this and update two uses of cc-option in
the toplevel Makefile.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Integrated-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
Allow an nfs root mount to use alternate RPC ports for mountd and nfsd.
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
[forward port to 2.6.33+]
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
|
|
|
|
|
|
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
ipv4/route.c: respect prefsrc for local routes
bridge: stp: ensure mac header is set
bridge: fix br_multicast_ipv6_rcv for paged skbs
atl1: fix oops when changing tx/rx ring params
drivers/atm/atmtcp.c: add missing atm_dev_put
starfire: Fix dma_addr_t size test for MIPS
tg3: fix return value check in tg3_read_vpd()
Broadcom CNIC core network driver: fix mem leak on allocation failures in cnic_alloc_uio_rings()
ISDN, Gigaset: Fix memory leak in do_disconnect_req()
CAN: Use inode instead of kernel address for /proc file
skfp: testing the wrong variable in skfp_driver_init()
ppp: allow disabling multilink protocol ID compression
ehea: Avoid changing vlan flags
ueagle-atm: fix PHY signal initialization race
|
|
The preferred source address is currently ignored for local routes,
which results in all local connections having a src address that is the
same as the local dst address. Fix this by respecting the preferred source
address when it is provided for local routes.
This bug can be demonstrated as follows:
# ifconfig dummy0 192.168.0.1
# ip route show table local | grep local.*dummy0
local 192.168.0.1 dev dummy0 proto kernel scope host src 192.168.0.1
# ip route change table local local 192.168.0.1 dev dummy0 \
proto kernel scope host src 127.0.0.1
# ip route show table local | grep local.*dummy0
local 192.168.0.1 dev dummy0 proto kernel scope host src 127.0.0.1
We now establish a local connection and verify the source IP
address selection:
# nc -l 192.168.0.1 3128 &
# nc 192.168.0.1 3128 &
# netstat -ant | grep 192.168.0.1:3128.*EST
tcp 0 0 192.168.0.1:3128 192.168.0.1:33228 ESTABLISHED
tcp 0 0 192.168.0.1:33228 192.168.0.1:3128 ESTABLISHED
Signed-off-by: Joel Sing <jsing@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ->trim_fs has been removed meanwhile, so remove it from the documentation
as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* master.kernel.org:/home/rmk/linux-2.6-arm:
ARM: pxa: fix page table corruption on resume
ARM: it8152: add IT8152_LAST_IRQ definition to fix build error
ARM: pxa: PXA_ESERIES depends on FB_W100.
ARM: 6605/1: Add missing include "asm/memory.h"
ARM: 6540/1: Stop irqsoff trace on return to user
ARM: 6537/1: update Nomadik, U300 and Ux500 maintainers
ARM: 6536/1: Add missing SZ_{32,64,128}
ARM: fix cache-feroceon-l2 after stack based kmap_atomic()
ARM: fix cache-xsc3l2 after stack based kmap_atomic()
ARM: get rid of kmap_high_l1_vipt()
ARM: smp: avoid incrementing mm_users on CPU startup
ARM: pxa: PXA_ESERIES depends on FB_W100.
|
|
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=25702
Reported-by: Martin Ettl <ettl.martin@gmx.de>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
If security_filter_rule_init() doesn't return a rule, then not everything
is as fine as the return code implies.
This bug only occurs when the LSM (eg. SELinux) is disabled at runtime.
Adding an empty LSM rule causes ima_match_rules() to always succeed,
ignoring any remaining rules.
default IMA TCB policy:
# PROC_SUPER_MAGIC
dont_measure fsmagic=0x9fa0
# SYSFS_MAGIC
dont_measure fsmagic=0x62656572
# DEBUGFS_MAGIC
dont_measure fsmagic=0x64626720
# TMPFS_MAGIC
dont_measure fsmagic=0x01021994
# SECURITYFS_MAGIC
dont_measure fsmagic=0x73636673
< LSM specific rule >
dont_measure obj_type=var_log_t
measure func=BPRM_CHECK
measure func=FILE_MMAP mask=MAY_EXEC
measure func=FILE_CHECK mask=MAY_READ uid=0
Thus without the patch, with the boot parameters 'tcb selinux=0', adding
the above 'dont_measure obj_type=var_log_t' rule to the default IMA TCB
measurement policy, would result in nothing being measured. The patch
prevents the default TCB policy from being replaced.
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Acked-by: Serge Hallyn <serge.hallyn@canonical.com>
Cc: David Safford <safford@watson.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
|
|
commit bf9ae5386bca8836c16e69ab8fdbe46767d7452a
(llc: use dev_hard_header) removed the
skb_reset_mac_header call from llc_mac_hdr_init.
This seems fine itself, but br_send_bpdu() invokes ebtables LOCAL_OUT.
We oops in ebt_basic_match() because it assumes eth_hdr(skb) returns
a meaningful result.
Cc: acme@ghostprotocols.net
References: https://bugzilla.kernel.org/show_bug.cgi?id=24532
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf: Fix callchain hit bad cast on ascii display
arch/x86/oprofile/op_model_amd.c: Perform initialisation on a single CPU
watchdog: Improve initialisation error message and documentation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6:
[media] em28xx: radio_fops should also use unlocked_ioctl
[media] wm8775: Revert changeset fcb9757333 to avoid a regression
[media] cx25840: Prevent device probe failure due to volume control ERANGE error
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/async_tx:
dmaengine: provide dummy functions for DMA_ENGINE=n
mv_xor: fix race in tasklet function
|
|
The function can't be __init itself (being called from some sysfs
handler), and hence none of the functions it calls can be either.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
use pskb_may_pull to access ipv6 header correctly for paged skbs
It was omitted in the bridge code leading to crash in blind
__skb_pull
since the skb is cloned undonditionally we also simplify the
the exit path
this fixes bug https://bugzilla.kernel.org/show_bug.cgi?id=25202
Dec 15 14:36:40 User-PC hostapd: wlan0: STA 00:15:00:60:5d:34 IEEE 802.11: authenticated
Dec 15 14:36:40 User-PC hostapd: wlan0: STA 00:15:00:60:5d:34 IEEE 802.11: associated (aid 2)
Dec 15 14:36:40 User-PC hostapd: wlan0: STA 00:15:00:60:5d:34 RADIUS: starting accounting session 4D0608A3-00000005
Dec 15 14:36:41 User-PC kernel: [175576.120287] ------------[ cut here ]------------
Dec 15 14:36:41 User-PC kernel: [175576.120452] kernel BUG at include/linux/skbuff.h:1178!
Dec 15 14:36:41 User-PC kernel: [175576.120609] invalid opcode: 0000 [#1] SMP
Dec 15 14:36:41 User-PC kernel: [175576.120749] last sysfs file: /sys/devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda/uevent
Dec 15 14:36:41 User-PC kernel: [175576.121035] Modules linked in: approvals binfmt_misc bridge stp llc parport_pc ppdev arc4 iwlagn snd_hda_codec_realtek iwlcore i915 snd_hda_intel mac80211 joydev snd_hda_codec snd_hwdep snd_pcm snd_seq_midi drm_kms_helper snd_rawmidi drm snd_seq_midi_event snd_seq snd_timer snd_seq_device cfg80211 eeepc_wmi usbhid psmouse intel_agp i2c_algo_bit intel_gtt uvcvideo agpgart videodev sparse_keymap snd shpchp v4l1_compat lp hid video serio_raw soundcore output snd_page_alloc ahci libahci atl1c
Dec 15 14:36:41 User-PC kernel: [175576.122712]
Dec 15 14:36:41 User-PC kernel: [175576.122769] Pid: 0, comm: kworker/0:0 Tainted: G W 2.6.37-rc5-wl+ #3 1015PE/1016P
Dec 15 14:36:41 User-PC kernel: [175576.123012] EIP: 0060:[<f83edd65>] EFLAGS: 00010283 CPU: 1
Dec 15 14:36:41 User-PC kernel: [175576.123193] EIP is at br_multicast_rcv+0xc95/0xe1c [bridge]
Dec 15 14:36:41 User-PC kernel: [175576.123362] EAX: 0000001c EBX: f5626318 ECX: 00000000 EDX: 00000000
Dec 15 14:36:41 User-PC kernel: [175576.123550] ESI: ec512262 EDI: f5626180 EBP: f60b5ca0 ESP: f60b5bd8
Dec 15 14:36:41 User-PC kernel: [175576.123737] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
Dec 15 14:36:41 User-PC kernel: [175576.123902] Process kworker/0:0 (pid: 0, ti=f60b4000 task=f60a8000 task.ti=f60b0000)
Dec 15 14:36:41 User-PC kernel: [175576.124137] Stack:
Dec 15 14:36:41 User-PC kernel: [175576.124181] ec556500 f6d06800 f60b5be8 c01087d8 ec512262 00000030 00000024 f5626180
Dec 15 14:36:41 User-PC kernel: [175576.124181] f572c200 ef463440 f5626300 3affffff f6d06dd0 e60766a4 000000c4 f6d06860
Dec 15 14:36:41 User-PC kernel: [175576.124181] ffffffff ec55652c 00000001 f6d06844 f60b5c64 c0138264 c016e451 c013e47d
Dec 15 14:36:41 User-PC kernel: [175576.124181] Call Trace:
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c01087d8>] ? sched_clock+0x8/0x10
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c0138264>] ? enqueue_entity+0x174/0x440
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c016e451>] ? sched_clock_cpu+0x131/0x190
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c013e47d>] ? select_task_rq_fair+0x2ad/0x730
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c0524fc1>] ? nf_iterate+0x71/0x90
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<f83e4914>] ? br_handle_frame_finish+0x184/0x220 [bridge]
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<f83e4790>] ? br_handle_frame_finish+0x0/0x220 [bridge]
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<f83e46e9>] ? br_handle_frame+0x189/0x230 [bridge]
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<f83e4790>] ? br_handle_frame_finish+0x0/0x220 [bridge]
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<f83e4560>] ? br_handle_frame+0x0/0x230 [bridge]
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c04ff026>] ? __netif_receive_skb+0x1b6/0x5b0
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c04f7a30>] ? skb_copy_bits+0x110/0x210
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c0503a7f>] ? netif_receive_skb+0x6f/0x80
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<f82cb74c>] ? ieee80211_deliver_skb+0x8c/0x1a0 [mac80211]
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<f82cc836>] ? ieee80211_rx_handlers+0xeb6/0x1aa0 [mac80211]
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c04ff1f0>] ? __netif_receive_skb+0x380/0x5b0
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c016e242>] ? sched_clock_local+0xb2/0x190
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c012b688>] ? default_spin_lock_flags+0x8/0x10
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c05d83df>] ? _raw_spin_lock_irqsave+0x2f/0x50
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<f82cd621>] ? ieee80211_prepare_and_rx_handle+0x201/0xa90 [mac80211]
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<f82ce154>] ? ieee80211_rx+0x2a4/0x830 [mac80211]
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<f815a8d6>] ? iwl_update_stats+0xa6/0x2a0 [iwlcore]
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<f8499212>] ? iwlagn_rx_reply_rx+0x292/0x3b0 [iwlagn]
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c05d83df>] ? _raw_spin_lock_irqsave+0x2f/0x50
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<f8483697>] ? iwl_rx_handle+0xe7/0x350 [iwlagn]
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<f8486ab7>] ? iwl_irq_tasklet+0xf7/0x5c0 [iwlagn]
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c01aece1>] ? __rcu_process_callbacks+0x201/0x2d0
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c0150d05>] ? tasklet_action+0xc5/0x100
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c0150a07>] ? __do_softirq+0x97/0x1d0
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c05d910c>] ? nmi_stack_correct+0x2f/0x34
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c0150970>] ? __do_softirq+0x0/0x1d0
Dec 15 14:36:41 User-PC kernel: [175576.124181] <IRQ>
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c01508f5>] ? irq_exit+0x65/0x70
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c05df062>] ? do_IRQ+0x52/0xc0
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c01036b0>] ? common_interrupt+0x30/0x38
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c03a1fc2>] ? intel_idle+0xc2/0x160
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c04daebb>] ? cpuidle_idle_call+0x6b/0x100
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c0101dea>] ? cpu_idle+0x8a/0xf0
Dec 15 14:36:41 User-PC kernel: [175576.124181] [<c05d2702>] ? start_secondary+0x1e8/0x1ee
Cc: David Miller <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 3f5a2a713aad28480d86b0add00c68484b54febc zeroes out the statistics
message block (SMB) and coalescing message block (CMB) when adapter ring
resources are freed. This is desirable behavior, but, as a side effect,
the commit leads to an oops when atl1_set_ringparam() attempts to alter
the number of rx or tx elements in the ring buffer (by using ethtool
-G, for example). We don't want SMB or CMB to change during this
operation.
Modify atl1_set_ringparam() to preserve SMB and CMB when changing ring
parameters.
Cc: stable@kernel.org
Signed-off-by: Jay Cliburn <jcliburn@gmail.com>
Reported-by: Tõnu Raitviir <jussuf@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/urgent
|
|
Before this patch, the following error would sometimes occur after a
resume on pxa3xx:
/path/to/mm/memory.c:144: bad pmd 8040542e.
The problem was that a temporary page table mapping was being improperly
restored.
The PXA3xx resume code creates a temporary mapping of resume_turn_on_mmu
to avoid a prefetch abort. The pxa3xx_resume_after_mmu code requires
that the r1 register holding the address of this mapping not be
modified, however, resume_turn_on_mmu does modify it. It is mostly
correct in that r1 receives the base table address, but it may also
get other bits in 13:0. This results in pxa3xx_resume_after_mmu
restoring the original mapping to the wrong place, corrupting memory
and leaving the temporary mapping in place.
Signed-off-by: Matt Reimer <mreimer@sdgsystems.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
|
|
The commit 6ac6b817f3f4c23c5febd960d8deb343e13af5f3 (ARM: pxa: encode
IRQ number into .nr_irqs) removed definition of ITE_LAST_IRQ which
caused the following build error:
CC arch/arm/common/it8152.o
arch/arm/common/it8152.c: In function 'it8152_init_irq':
arch/arm/common/it8152.c:86: error: 'IT8152_LAST_IRQ' undeclared (first use in this function)
arch/arm/common/it8152.c:86: error: (Each undeclared identifier is reported only once
arch/arm/common/it8152.c:86: error: for each function it appears in.)
make[2]: *** [arch/arm/common/it8152.o] Error 1
Defining the IT8152_LAST_IRQ in the arch/arm/include/hardware/it8152.c
fixes the build.
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
|
|
As arch/arm/mach-pxa/eseries.c references w100fb_gpio_{read,write}()
directly.
Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
|
|
ipchain__fprintf_graph() casts the number of hits in a branch as an
int, which means we lose its highests bits.
This results in meaningless number of callchain hits in perf.data
that have a high number of hits recorded, typically those that have
callchain branches hits appearing more than INT_MAX. This happens
easily as those are pondered by the event period.
Reported-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
|
|
Disable preemption in init_ibs(). The function only checks the
ibs capabilities and sets up pci devices (if necessary). It runs
only on one cpu but operates with the local APIC and some MSRs,
thus it is better to disable preemption.
[ 7.034377] BUG: using smp_processor_id() in preemptible [00000000] code: modprobe/483
[ 7.034385] caller is setup_APIC_eilvt+0x155/0x180
[ 7.034389] Pid: 483, comm: modprobe Not tainted 2.6.37-rc1-20101110+ #1
[ 7.034392] Call Trace:
[ 7.034400] [<ffffffff812a2b72>] debug_smp_processor_id+0xd2/0xf0
[ 7.034404] [<ffffffff8101e985>] setup_APIC_eilvt+0x155/0x180
[ ... ]
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=22812
Reported-by: <atswartz@gmail.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: oprofile-list@lists.sourceforge.net <oprofile-list@lists.sourceforge.net>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <stable@kernel.org> [2.6.37.x]
LKML-Reference: <20110103111514.GM4739@erda.amd.com>
[ small cleanups ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
em28xx uses core assisted locking, so it shouldn't use .ioctl.
The .ioctl callback was replaced by .unlocked_ioctl for video nodes,
but not for radio nodes. This is now corrected.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
It seems that cx88 and ivtv use wm8775 on some different modes. The
patch that added support for a board with wm8775 broke ivtv boards with
this device. As we're too close to release 2.6.37, let's just revert
it.
Reported-by: Andy Walls <awalls@md.metrocast.net>
Reported-by: Eric Sharkey <eric@lisaneric.org>
Reported-by: Auric <auric@aanet.com.au>
Reported by: David Gesswein <djg@pdp8online.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This patch fixes a regression that crept into 2.6.36.
The volume control scale in the cx25840 driver has an unusual mapping
from register values to v4l2 volume control values. Enforce the mapping
limits, so that the default volume control setting does not fall out of
bounds to prevent the cx25840 module device probe from failing.
Signed-off-by: Andy Walls <awalls@md.metrocast.net>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
|
|
This lets drivers, optionally using the dmaengine, build with DMA_ENGINE
unselected.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
use mv_xor_slot_cleanup() instead of __mv_xor_slot_cleanup() as the former function
aquires the spin lock that needed to protect the drivers data.
Cc: <stable@kernel.org>
Signed-off-by: Saeed Bishara <saeed@marvell.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This patch fixes below build error by adding the missing asm/memory.h,
which is needed for arch_is_coherent().
$ make pxa3xx_defconfig; make
CC init/do_mounts_rd.o
In file included from include/linux/list_bl.h:5,
from include/linux/rculist_bl.h:7,
from include/linux/dcache.h:7,
from include/linux/fs.h:381,
from init/do_mounts_rd.c:3:
include/linux/bit_spinlock.h: In function 'bit_spin_unlock':
include/linux/bit_spinlock.h:61: error: implicit declaration of function 'arch_is_coherent'
make[1]: *** [init/do_mounts_rd.o] Error 1
make: *** [init] Error 2
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Peter Huewe <peterhuewe@gmx.de>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
|
|
The error message 'NMI watchdog failed to create perf event...'
does not make it clear that this is a fatal error for the
watchdog. It also currently prints the error value as a
pointer, rather than extracting the error code with PTR_ERR().
Fix that.
Add a note to the description of the 'nowatchdog' kernel
parameter to associate it with this message.
Reported-by: Cesare Leonardi <celeonar@gmail.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Cc: 599368@bugs.debian.org
Cc: 608138@bugs.debian.org
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: <stable@kernel.org> # .37.x and later
LKML-Reference: <1294009362.3167.126.camel@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
The owner field was removed from struct attribute in
6fd69dc578fa0b1bbc3aad70ae3af9a137211707, so don't assign it anymore.
Signed-off-by: Maurus Cuelenaere <mcuelenaere@gmail.com>
Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
|
|
* 'kvm-updates/2.6.37' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: i8259: initialize isr_ack
KVM: MMU: Fix incorrect direct gfn for unpaged mode shadow
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
ALSA: hda: Use LPIB quirk for Dell Inspiron m101z/1120
sound: Prevent buffer overflow in OSS load_mixer_volumes
ASoC: codecs: wm8753: Fix register cache incoherency
ASoC: codecs: wm9090: Fix register cache incoherency
ASoC: codecs: wm8962: Fix register cache incoherency
ASoC: codecs: wm8955: Fix register cache incoherency
ASoC: codecs: wm8904: Fix register cache incoherency
ASoC: codecs: wm8741: Fix register cache incoherency
ASoC: codecs: wm8523: Fix register cache incoherency
ASoC: codecs: max98088: Fix register cache incoherency
ASoC: codecs: Add missing control_type initialization
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
kconfig: fix undesirable side effect of adding "visible" menu attribute
|
|
|
|
isr_ack is never initialized. So, until the first PIC reset, interrupts
may fail to be injected. This can cause Windows XP to fail to boot, as
reported in the fallout from the fix to
https://bugzilla.kernel.org/show_bug.cgi?id=21962.
Reported-and-tested-by: Nicolas Prochazka <prochazka.nicolas@gmail.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
The earlier call to atm_dev_lookup increases the reference count of dev,
so decrease it on the way out.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression x, E;
constant C;
@@
x = atm_dev_lookup(...);
... when != false x != NULL
when != true x == NULL
when != \(E = x\|x = E\)
when != atm_dev_put(dev);
*return -C;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 56543af "starfire: use BUILD_BUG_ON for netdrv_addr_t" revealed
that the preprocessor condition used to find the size of dma_addr_t
yielded the wrong result for some architectures and configurations.
This was kluged for 64-bit PowerPC in commit 3e502e6 by adding yet
another case to the condition. However, 64-bit MIPS configurations
are not detected reliably either.
This should be fixed by using CONFIG_ARCH_DMA_ADDR_T_64BIT, but that
isn't yet defined everywhere it should be.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Besides -ETIMEDOUT and -EINTR, pci_read_vpd may return other error
values like -ENODEV or -EINVAL which are ignored due to the buggy
check, but the data are not read from VPD anyway and this is checked
subsequently with at most 3 needless loop iterations. This does not
show up as a runtime bug.
CC: Matt Carlson <mcarlson@broadcom.com>
CC: Michael Chan <mchan@broadcom.com>
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cnic_alloc_uio_rings()
We are leaking memory in drivers/net/cnic.c::cnic_alloc_uio_rings() if
either of the calls to dma_alloc_coherent() fail. This patch fixes it by
freeing both the memory allocated with kzalloc() and memory allocated with
previous calls to dma_alloc_coherent() when there's a failure.
Thanks to Joe Perches <joe@perches.com> for suggesting a better
implementation than my initial version.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hi,
In drivers/isdn/gigaset/capi.c::do_disconnect_req() we will leak the
memory allocated (with kmalloc) to 'b3cmsg' if the call to alloc_skb()
fails.
...
b3cmsg = kmalloc(sizeof(*b3cmsg), GFP_KERNEL);
allocation here ------^
if (!b3cmsg) {
dev_err(cs->dev, "%s: out of memory\n", __func__);
send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
return;
}
capi_cmsg_header(b3cmsg, ap->id, CAPI_DISCONNECT_B3, CAPI_IND,
ap->nextMessageNumber++,
cmsg->adr.adrPLCI | (1 << 16));
b3cmsg->Reason_B3 = CapiProtocolErrorLayer1;
b3skb = alloc_skb(CAPI_DISCONNECT_B3_IND_BASELEN, GFP_KERNEL);
if (b3skb == NULL) {
dev_err(cs->dev, "%s: out of memory\n", __func__);
send_conf(iif, ap, skb, CAPI_MSGOSRESOURCEERR);
return;
leak here ------^
...
This leak is easily fixed by just kfree()'ing the memory allocated to
'b3cmsg' right before we return. The following patch does that.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Acked-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the socket address is just being used as a unique identifier, its
inode number is an alternative that does not leak potentially sensitive
information.
CC-ing stable because MITRE has assigned CVE-2010-4565 to the issue.
Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel
* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
drm/i915/dvo: Report LVDS attached to ch701x as connected
Revert "drm/i915/bios: Reverse order of 100/120 Mhz SSC clocks"
drm/i915: Verify Ironlake eDP presence on DP_A using the capability fuse
drm/i915, intel_ips: When i915 loads after IPS, make IPS relink to i915.
drm/i915/sdvo: Add hdmi connector properties after initing the connector
drm/i915: Set the required VFMUNIT clock gating disable on Ironlake.
|
|
This reverts commit 7e24cce38a99f373450db67bf576fe73e8168d66 because it
was never appropriate for mainline.
Do not check for init flag before starting I/O - zram module is unusable
without this fix.
The oops mentioned in the reverted commit message was actually a problem
only with the zram version as present in project's own repository where
we allocate struct zram_stats_cpu upon device initialization. OTOH, In
mainline/staging version of zram, we allocate struct stats upfront, so
this oops cannot happen in mainline version.
Checking for init_done flag in zram_make_request() results in a *no-op*
for any I/O operation since we simply always return success. This flag
is actually set when the first write occurs on a zram disk which
triggers its initialization.
Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=25722
Reported-by: Dennis Jansen <dennis.jansen@web.de>
Signed-off-by: Nitin Gupta <ngupta@vflare.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
* 'merge-spi' of git://git.secretlab.ca/git/linux-2.6:
spi/m68knommu: Coldfire QSPI platform support
spi/omap2_mcspi.c: Force CS to be in inactive state after off-mode transition
|
|
At __mem_cgroup_try_charge(), VM_BUG_ON(!mm->owner) is checked.
But as commented in mem_cgroup_from_task(), mm->owner can be NULL
in some racy case. This check of VM_BUG_ON() is bad.
A possible story to hit this is at swapoff()->try_to_unuse(). It passes
mm_struct to mem_cgroup_try_charge_swapin() while mm->owner is NULL. If we
can't get proper mem_cgroup from swap_cgroup information, mm->owner is used
as charge target and we see NULL.
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reported-by: Hugh Dickins <hughd@google.com>
Reported-by: Thomas Meyer <thomas@m3y3r.de>
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mostly inspired by all the recent BKL removal changes, but a lot of older
updates also weren't properly recorded.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As we have already detected something attached to the chip during
initialisation, always report the LVDS connector status as connected
during probing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
|
Tom Zanussi
Michal Marek
Jason Wessel
Bruce Ashfield
Linus Torvalds
Joel Sing
Christoph Hellwig
Andrew Morton
Mimi Zohar
Russell King
Florian Westphal
Jan Beulich
Tomas Winkler
J. K. Cliburn
Ingo Molnar
Aric D. Blumer
Mike Rapoport
Lennert Buytenhek
Frederic Weisbecker
Robert Richter
Hans Verkuil
Mauro Carvalho Chehab
Andy Walls
Guennadi Liakhovetski
Saeed Bishara
Axel Lin
Ben Hutchings
Maurus Cuelenaere
Takashi Iwai
Avi Kivity
Julia Lawall
David Sterba
Jesper Juhl
Dan Rosenberg
Nitin Gupta
KAMEZAWA Hiroyuki
Christoph Hellwig
Chris Wilson