1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
|
{
"manual_bsp-hw_20190807093708": {
"configuration": {
"IMAGE_BASENAME": "core-image-sato-sdk",
"LAYERS": {
"meta": {
"branch": "thud",
"commit": "cb26830f765f03309c0663352cc5849491271be8",
"commit_count": 52777
},
"meta-poky": {
"branch": "thud",
"commit": "cb26830f765f03309c0663352cc5849491271be8",
"commit_count": 52777
},
"meta-yocto-bsp": {
"branch": "thud",
"commit": "cb26830f765f03309c0663352cc5849491271be8",
"commit_count": 52777
}
},
"MACHINE": "beaglebone-yocto",
"STARTTIME": "20190807093708",
"TEST_MODULE": "bsp-hw",
"TEST_TYPE": "manual"
},
"result": {
"bsps-hw.bsps-hw.Add_multiple_files_in_media_player": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.Boot_from_JFFS2_image": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.Check_if_RTC_(Real_Time_Clock)_can_work_correctly": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.Check_if_SATA_disk_can_work_correctly": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.Check_if_target_can_support_EEPROM": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.Check_if_watchdog_can_reset_the_target_system": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.Graphics_-_ABAT": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.Graphics_-_x11perf_-_2D": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_HDD-drive": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_SD-drive": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.MicroSD_-__mount": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.MicroSD_-__read_files": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.MicroSD_-__umount": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.MicroSD_-__write_files": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.System_can_boot_up_via_NFS": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.Test_Seek_bar_and_volume_control": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.Test_boot_on_serial_communication_HDD": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.Test_boot_on_serial_communication_SD": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.Test_boot_on_serial_communication_USB": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.Test_if_LAN_device_works_well_after_resume_from_suspend_state": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.Test_if_usb_hid_device_works_well_after_resume_from_suspend_state": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.USB_-_mount": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.USB_-_read_files": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.USB_-_umount": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.USB_-_write_files": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.X_server_can_start_up_with_runlevel_5_boot": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.audio_-_play_(ogg)_with_HDMI": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.audio_-_play_(wav)_with_HDMI": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.boot_and_install_from_USB": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.boot_from_runlevel_3": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.boot_from_runlevel_5": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.check_CPU_utilization_after_standby": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.check_bash_in_image": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.click_terminal_icon_on_X_desktop": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.connman_offline_mode_in_connman-gnome": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.ethernet_get_IP_in_connman_via_DHCP": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.ethernet_static_ip_set_in_connman": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.live_boot_from_USB": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.media_player_-_play_video_(ogv)": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.media_player_-_stop/play_button_(ogv)": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.reboot_system": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.rpm_-__install_dependency_package": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.shutdown_system": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.standby": {
"status": "SKIPPED"
},
"bsps-hw.bsps-hw.switch_among_multi_applications_and_desktop": {
"status": "PASSED"
},
"bsps-hw.bsps-hw.video_-_libva_check_(ogg_video_play)": {
"status": "SKIPPED"
}
}
},
"manual_compliance-test_20190807095651": {
"configuration": {
"IMAGE_BASENAME": "core-image-sato-sdk",
"LAYERS": {
"meta": {
"branch": "thud",
"commit": "cb26830f765f03309c0663352cc5849491271be8",
"commit_count": 52777
},
"meta-poky": {
"branch": "thud",
"commit": "cb26830f765f03309c0663352cc5849491271be8",
"commit_count": 52777
},
"meta-yocto-bsp": {
"branch": "thud",
"commit": "cb26830f765f03309c0663352cc5849491271be8",
"commit_count": 52777
}
},
"MACHINE": "beaglebone-yocto",
"STARTTIME": "20190807095651",
"TEST_MODULE": "compliance-test",
"TEST_TYPE": "manual"
},
"result": {
"compliance-test.compliance-test.LSB_subset_test_suite": {
"status": "SKIPPED"
},
"compliance-test.compliance-test.LTP_subset_test_suite": {
"status": "PASSED"
},
"compliance-test.compliance-test.POSIX_subset_test_suite": {
"status": "PASSED"
},
"compliance-test.compliance-test.stress_test_-_- crashme_-_-Beaglebone": {
"status": "PASSED"
},
"compliance-test.compliance-test.stress_test_-_Genericx86-64": {
"status": "SKIPPED"
},
"compliance-test.compliance-test.stress_test_-_ltp_-Beaglebone": {
"status": "PASSED"
}
}
},
"runtime_core-image-sato-sdk_beaglebone-yocto_20190805071955": {
"configuration": {
"DISTRO": "poky",
"HOST_DISTRO": "ubuntu-16.04",
"IMAGE_BASENAME": "core-image-sato-sdk",
"IMAGE_PKGTYPE": "rpm",
"LAYERS": {
"meta": {
"branch": "thud",
"commit": "cb26830f765f03309c0663352cc5849491271be8",
"commit_count": 52777
},
"meta-poky": {
"branch": "thud",
"commit": "cb26830f765f03309c0663352cc5849491271be8",
"commit_count": 52777
},
"meta-yocto-bsp": {
"branch": "thud",
"commit": "cb26830f765f03309c0663352cc5849491271be8",
"commit_count": 52777
}
},
"MACHINE": "beaglebone-yocto",
"STARTTIME": "20190805071955",
"TEST_TYPE": "runtime"
},
"result": {
"apt.AptRepoTest.test_apt_install_from_repo": {
"log": "Test requires apt to be installed",
"status": "SKIPPED"
},
"buildcpio.BuildCpioTest.test_cpio": {
"status": "PASSED"
},
"buildgalculator.GalculatorTest.test_galculator": {
"status": "PASSED"
},
"buildlzip.BuildLzipTest.test_lzip": {
"status": "PASSED"
},
"connman.ConnmanTest.test_connmand_help": {
"status": "PASSED"
},
"connman.ConnmanTest.test_connmand_running": {
"status": "PASSED"
},
"date.DateTest.test_date": {
"status": "PASSED"
},
"df.DfTest.test_df": {
"status": "PASSED"
},
"dnf.DnfBasicTest.test_dnf_help": {
"status": "PASSED"
},
"dnf.DnfBasicTest.test_dnf_history": {
"status": "PASSED"
},
"dnf.DnfBasicTest.test_dnf_info": {
"status": "PASSED"
},
"dnf.DnfBasicTest.test_dnf_search": {
"status": "PASSED"
},
"dnf.DnfBasicTest.test_dnf_version": {
"status": "PASSED"
},
"dnf.DnfRepoTest.test_dnf_exclude": {
"status": "PASSED"
},
"dnf.DnfRepoTest.test_dnf_install": {
"status": "PASSED"
},
"dnf.DnfRepoTest.test_dnf_install_dependency": {
"status": "PASSED"
},
"dnf.DnfRepoTest.test_dnf_install_from_disk": {
"status": "PASSED"
},
"dnf.DnfRepoTest.test_dnf_install_from_http": {
"status": "PASSED"
},
"dnf.DnfRepoTest.test_dnf_installroot": {
"status": "PASSED"
},
"dnf.DnfRepoTest.test_dnf_makecache": {
"status": "PASSED"
},
"dnf.DnfRepoTest.test_dnf_reinstall": {
"status": "PASSED"
},
"dnf.DnfRepoTest.test_dnf_repoinfo": {
"status": "PASSED"
},
"gcc.GccCompileTest.test_gcc_compile": {
"status": "PASSED"
},
"gcc.GccCompileTest.test_gpp2_compile": {
"status": "PASSED"
},
"gcc.GccCompileTest.test_gpp_compile": {
"status": "PASSED"
},
"gcc.GccCompileTest.test_make": {
"status": "PASSED"
},
"gi.GObjectIntrospectionTest.test_python": {
"status": "PASSED"
},
"kernelmodule.KernelModuleTest.test_kernel_module": {
"status": "PASSED"
},
"ldd.LddTest.test_ldd": {
"status": "PASSED"
},
"logrotate.LogrotateTest.test_1_logrotate_setup": {
"status": "PASSED"
},
"logrotate.LogrotateTest.test_2_logrotate": {
"status": "PASSED"
},
"oe_syslog.SyslogTest.test_syslog_running": {
"status": "PASSED"
},
"oe_syslog.SyslogTestConfig.test_syslog_logger": {
"status": "PASSED"
},
"oe_syslog.SyslogTestConfig.test_syslog_restart": {
"status": "PASSED"
},
"oe_syslog.SyslogTestConfig.test_syslog_startup_config": {
"status": "PASSED"
},
"opkg.OpkgRepoTest.test_opkg_install_from_repo": {
"log": "Test requires opkg to be installed",
"status": "SKIPPED"
},
"pam.PamBasicTest.test_pam": {
"log": "Test requires pam to be in DISTRO_FEATURES",
"status": "SKIPPED"
},
"parselogs.ParseLogsTest.test_parselogs": {
"log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/thud/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 32, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/thud/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 32, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/thud/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 353, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 8 != 0 : No ignore list found for this machine, using default\nNo ignore list found for this machine, using default\nNo ignore list found for this machine, using default\nNo ignore list found for this machine, using default\nNo ignore list found for this machine, using default\nNo ignore list found for this machine, using default\nNo ignore list found for this machine, using default\nNo ignore list found for this machine, using default\nLog: /buildarea4/yzhao1/yocto/thud/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/Xorg.0.log\n-----------------------\nCentral error: [ 29.478] (EE) modeset(0): Failed to make EGL context current\n***********************\n\t\"Builtin Default fbdev Screen 0\" for depth/fbbpp 16/16\n[ 28.954] (**) modeset(0): Depth 16, (--) framebuffer bpp 16\n[ 28.954] (==) modeset(0): RGB weight 565\n[ 28.954] (==) modeset(0): Default visual is TrueColor\n[ 28.954] (II) Loading sub module \"glamoregl\"\n[ 28.954] (II) LoadModule: \"glamoregl\"\n[ 28.954] (II) Loading /usr/lib/xorg/modules/libglamoregl.so\n[ 29.085] (II) Module glamoregl: vendor=\"X.Org Foundation\"\n[ 29.086] \tcompiled for 1.20.1, module version = 1.0.1\n[ 29.086] \tABI class: X.Org ANSI C Emulation, version 0.4\n[ 29.478] (EE) modeset(0): Failed to make EGL context current\n[ 29.504] (EE) modeset(0): glamor initialization failed\n[ 29.505] (II) modeset(0): ShadowFB: preferred NO, enabled NO\n[ 29.535] (II) modeset(0): Output HDMI-1 using monitor section Builtin Default Monitor\n[ 29.565] (II) modeset(0): EDID for output HDMI-1\n[ 29.565] (II) modeset(0): Manufacturer: DEL Model: f011 Serial#: 809779532\n[ 29.565] (II) modeset(0): Year: 2009 Week: 29\n[ 29.565] (II) modeset(0): EDID Version: 1.3\n[ 29.565] (II) modeset(0): Digital Display Input\n[ 29.565] (II) modeset(0): Max Image Size [cm]: horiz.: 47 vert.: 30\n[ 29.565] (II) modeset(0): Gamma: 2.20\n\n***********************\nCentral error: [ 29.504] (EE) modeset(0): glamor initialization failed\n***********************\n[ 28.954] (**) modeset(0): Depth 16, (--) framebuffer bpp 16\n[ 28.954] (==) modeset(0): RGB weight 565\n[ 28.954] (==) modeset(0): Default visual is TrueColor\n[ 28.954] (II) Loading sub module \"glamoregl\"\n[ 28.954] (II) LoadModule: \"glamoregl\"\n[ 28.954] (II) Loading /usr/lib/xorg/modules/libglamoregl.so\n[ 29.085] (II) Module glamoregl: vendor=\"X.Org Foundation\"\n[ 29.086] \tcompiled for 1.20.1, module version = 1.0.1\n[ 29.086] \tABI class: X.Org ANSI C Emulation, version 0.4\n[ 29.478] (EE) modeset(0): Failed to make EGL context current\n[ 29.504] (EE) modeset(0): glamor initialization failed\n[ 29.505] (II) modeset(0): ShadowFB: preferred NO, enabled NO\n[ 29.535] (II) modeset(0): Output HDMI-1 using monitor section Builtin Default Monitor\n[ 29.565] (II) modeset(0): EDID for output HDMI-1\n[ 29.565] (II) modeset(0): Manufacturer: DEL Model: f011 Serial#: 809779532\n[ 29.565] (II) modeset(0): Year: 2009 Week: 29\n[ 29.565] (II) modeset(0): EDID Version: 1.3\n[ 29.565] (II) modeset(0): Digital Display Input\n[ 29.565] (II) modeset(0): Max Image Size [cm]: horiz.: 47 vert.: 30\n[ 29.565] (II) modeset(0): Gamma: 2.20\n[ 29.565] (II) modeset(0): DPMS capabilities: Off\n\n***********************\nLog: /buildarea4/yzhao1/yocto/thud/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg\n-----------------------\nCentral error: [ 3.333817] cfg80211: failed to load regulatory.db\n***********************\n[ 3.274492] musb-hdrc musb-hdrc.1: MUSB HDRC host driver\n[ 3.278829] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1\n[ 3.286355] hub 1-0:1.0: USB hub found\n[ 3.289036] hub 1-0:1.0: 1 port detected\n[ 3.293194] console [netcon0] enabled\n[ 3.295734] netconsole: network logging started\n[ 3.299564] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)\n[ 3.307865] cfg80211: Loading compiled-in X.509 certificates for regulatory database\n[ 3.318337] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\n[ 3.324326] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n[ 3.333817] cfg80211: failed to load regulatory.db\n[ 3.353413] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)\n[ 3.360759] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.\n[ 3.372096] devtmpfs: mounted\n[ 3.377982] Freeing unused kernel memory: 1024K\n[ 3.731955] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 3.914574] hub 1-1:1.0: USB hub found\n[ 3.921955] hub 1-1:1.0: 7 ports detected\n[ 4.271962] usb 1-1.2: new low-speed USB device number 3 using musb-hdrc\n[ 4.416481] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.2/1-1.2:1.0/0003:413C:2003.0001/input/input0\n[ 4.492415] hid-generic 0003:413C:2003.0001: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-musb-hdrc.1-1.2/input0\n\n***********************\nCentral error: [ 0.422113] l4_wkup_cm:clk:0010:0: failed to disable\n***********************\n[ 0.102791] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.102847] futex hash table entries: 256 (order: -1, 3072 bytes)\n[ 0.104269] xor: measuring software checksum speed\n[ 0.199144] arm4regs : 1218.800 MB/sec\n[ 0.299087] 8regs : 902.800 MB/sec\n[ 0.399084] 32regs : 1172.400 MB/sec\n[ 0.399101] xor: using function: arm4regs (1218.800 MB/sec)\n[ 0.399131] pinctrl core: initialized pinctrl subsystem\n[ 0.400249] NET: Registered protocol family 16\n[ 0.402680] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.422113] l4_wkup_cm:clk:0010:0: failed to disable\n[ 0.475776] cpuidle: using governor ladder\n[ 0.475860] cpuidle: using governor menu\n[ 0.481402] OMAP GPIO hardware version 0.1\n[ 0.490731] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.669344] raid6: int32x1 gen() 209 MB/s\n[ 0.839254] raid6: int32x1 xor() 143 MB/s\n[ 1.009237] raid6: int32x2 gen() 223 MB/s\n[ 1.179229] raid6: int32x2 xor() 161 MB/s\n[ 1.349116] raid6: int32x4 gen() 190 MB/s\n[ 1.519276] raid6: int32x4 xor() 133 MB/s\n\n***********************\nCentral error: [ 3.324326] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n***********************\n[ 3.261610] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 3.274492] musb-hdrc musb-hdrc.1: MUSB HDRC host driver\n[ 3.278829] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1\n[ 3.286355] hub 1-0:1.0: USB hub found\n[ 3.289036] hub 1-0:1.0: 1 port detected\n[ 3.293194] console [netcon0] enabled\n[ 3.295734] netconsole: network logging started\n[ 3.299564] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)\n[ 3.307865] cfg80211: Loading compiled-in X.509 certificates for regulatory database\n[ 3.318337] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\n[ 3.324326] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n[ 3.333817] cfg80211: failed to load regulatory.db\n[ 3.353413] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)\n[ 3.360759] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.\n[ 3.372096] devtmpfs: mounted\n[ 3.377982] Freeing unused kernel memory: 1024K\n[ 3.731955] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 3.914574] hub 1-1:1.0: USB hub found\n[ 3.921955] hub 1-1:1.0: 7 ports detected\n[ 4.271962] usb 1-1.2: new low-speed USB device number 3 using musb-hdrc\n[ 4.416481] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.2/1-1.2:1.0/0003:413C:2003.0001/input/input0\n\n***********************\nLog: /buildarea4/yzhao1/yocto/thud/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 3.333817] cfg80211: failed to load regulatory.db\n***********************\n[ 3.274492] musb-hdrc musb-hdrc.1: MUSB HDRC host driver\n[ 3.278829] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1\n[ 3.286355] hub 1-0:1.0: USB hub found\n[ 3.289036] hub 1-0:1.0: 1 port detected\n[ 3.293194] console [netcon0] enabled\n[ 3.295734] netconsole: network logging started\n[ 3.299564] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)\n[ 3.307865] cfg80211: Loading compiled-in X.509 certificates for regulatory database\n[ 3.318337] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\n[ 3.324326] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n[ 3.333817] cfg80211: failed to load regulatory.db\n[ 3.353413] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)\n[ 3.360759] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.\n[ 3.372096] devtmpfs: mounted\n[ 3.377982] Freeing unused kernel memory: 1024K\n[ 3.731955] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 3.914574] hub 1-1:1.0: USB hub found\n[ 3.921955] hub 1-1:1.0: 7 ports detected\n[ 4.271962] usb 1-1.2: new low-speed USB device number 3 using musb-hdrc\n[ 4.416481] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.2/1-1.2:1.0/0003:413C:2003.0001/input/input0\n[ 4.492415] hid-generic 0003:413C:2003.0001: input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-musb-hdrc.1-1.2/input0\n\n***********************\nCentral error: [ 0.422113] l4_wkup_cm:clk:0010:0: failed to disable\n***********************\n[ 0.102791] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.102847] futex hash table entries: 256 (order: -1, 3072 bytes)\n[ 0.104269] xor: measuring software checksum speed\n[ 0.199144] arm4regs : 1218.800 MB/sec\n[ 0.299087] 8regs : 902.800 MB/sec\n[ 0.399084] 32regs : 1172.400 MB/sec\n[ 0.399101] xor: using function: arm4regs (1218.800 MB/sec)\n[ 0.399131] pinctrl core: initialized pinctrl subsystem\n[ 0.400249] NET: Registered protocol family 16\n[ 0.402680] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.422113] l4_wkup_cm:clk:0010:0: failed to disable\n[ 0.475776] cpuidle: using governor ladder\n[ 0.475860] cpuidle: using governor menu\n[ 0.481402] OMAP GPIO hardware version 0.1\n[ 0.490731] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.669344] raid6: int32x1 gen() 209 MB/s\n[ 0.839254] raid6: int32x1 xor() 143 MB/s\n[ 1.009237] raid6: int32x2 gen() 223 MB/s\n[ 1.179229] raid6: int32x2 xor() 161 MB/s\n[ 1.349116] raid6: int32x4 gen() 190 MB/s\n[ 1.519276] raid6: int32x4 xor() 133 MB/s\n\n***********************\nCentral error: [ 3.324326] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n***********************\n[ 3.261610] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 3.274492] musb-hdrc musb-hdrc.1: MUSB HDRC host driver\n[ 3.278829] musb-hdrc musb-hdrc.1: new USB bus registered, assigned bus number 1\n[ 3.286355] hub 1-0:1.0: USB hub found\n[ 3.289036] hub 1-0:1.0: 1 port detected\n[ 3.293194] console [netcon0] enabled\n[ 3.295734] netconsole: network logging started\n[ 3.299564] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801)\n[ 3.307865] cfg80211: Loading compiled-in X.509 certificates for regulatory database\n[ 3.318337] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\n[ 3.324326] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n[ 3.333817] cfg80211: failed to load regulatory.db\n[ 3.353413] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)\n[ 3.360759] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.\n[ 3.372096] devtmpfs: mounted\n[ 3.377982] Freeing unused kernel memory: 1024K\n[ 3.731955] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 3.914574] hub 1-1:1.0: USB hub found\n[ 3.921955] hub 1-1:1.0: 7 ports detected\n[ 4.271962] usb 1-1.2: new low-speed USB device number 3 using musb-hdrc\n[ 4.416481] input: Dell Dell USB Keyboard as /devices/platform/ocp/47400000.usb/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.2/1-1.2:1.0/0003:413C:2003.0001/input/input0\n\n***********************\n8 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n",
"status": "FAILED"
},
"perl.PerlTest.test_perl_works": {
"status": "PASSED"
},
"ping.PingTest.test_ping": {
"status": "PASSED"
},
"ptest.PtestRunnerTest.test_ptestrunner": {
"log": "Test requires ptest-runner to be installed",
"status": "SKIPPED"
},
"python.PythonTest.test_python3": {
"status": "PASSED"
},
"rpm.RpmBasicTest.test_rpm_help": {
"status": "PASSED"
},
"rpm.RpmBasicTest.test_rpm_query": {
"status": "PASSED"
},
"rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": {
"status": "PASSED"
},
"rpm.RpmInstallRemoveTest.test_rpm_install": {
"status": "PASSED"
},
"rpm.RpmInstallRemoveTest.test_rpm_query_nonroot": {
"status": "PASSED"
},
"rpm.RpmInstallRemoveTest.test_rpm_remove": {
"status": "PASSED"
},
"scp.ScpTest.test_scp_file": {
"status": "PASSED"
},
"ssh.SSHTest.test_ssh": {
"status": "PASSED"
},
"stap.StapTest.test_stap": {
"log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/thud/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 32, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/thud/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 32, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/thud/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 32, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/thud/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 32, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/thud/poky/meta/lib/oeqa/runtime/cases/stap.py\", line 35, in test_stap\n self.assertEqual(status, 0, msg='\\n'.join([cmd, output]))\nAssertionError: 1 != 0 : stap --disable-cache -DSTP_NO_VERREL_CHECK /tmp/hello.stp\nWARNING: Kernel function symbol table missing [man warning::symbols]\n/tmp/ccFKDlPU.s: Assembler messages:\n/tmp/ccFKDlPU.s:1055: Error: selected processor does not support `cpsid i' in ARM mode\n/tmp/ccFKDlPU.s:1142: Error: selected processor does not support `cpsid i' in ARM mode\n/tmp/ccFKDlPU.s:1206: Error: selected processor does not support `cpsid i' in ARM mode\n/tmp/ccFKDlPU.s:1288: Error: selected processor does not support `cpsid i' in ARM mode\n/tmp/ccFKDlPU.s:2361: Error: selected processor does not support `ldrex r0,[r2]' in ARM mode\n/tmp/ccFKDlPU.s:2364: Error: selected processor does not support `strexeq ip,r1,[r2]' in ARM mode\n/tmp/ccFKDlPU.s:2461: Error: selected processor does not support `ldrex r2,[r3]' in ARM mode\n/tmp/ccFKDlPU.s:2463: Error: selected processor does not support `strex r1,r2,[r3]' in ARM mode\n/tmp/ccFKDlPU.s:2474: Error: selected processor does not support `ldrex r2,[r3]' in ARM mode\n/tmp/ccFKDlPU.s:2476: Error: selected processor does not support `strex r1,r2,[r3]' in ARM mode\n/tmp/ccFKDlPU.s:2524: Error: selected processor does not support `cpsid i' in ARM mode\n/tmp/ccFKDlPU.s:2572: Error: selected processor does not support `ldrex r3,[r4]' in ARM mode\n/tmp/ccFKDlPU.s:2574: Error: selected processor does not support `strex r2,r3,[r4]' in ARM mode\n/tmp/ccFKDlPU.s:2630: Error: selected processor does not support `ldrex r3,[r4]' in ARM mode\n/tmp/ccFKDlPU.s:2632: Error: selected processor does not support `strex r2,r3,[r4]' in ARM mode\n/tmp/ccFKDlPU.s:2682: Error: selected processor does not support `cpsid i' in ARM mode\n/tmp/ccFKDlPU.s:2717: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:2730: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:2751: Error: selected processor does not support `ldrex r3,[r5]' in ARM mode\n/tmp/ccFKDlPU.s:2753: Error: selected processor does not support `strex r2,r3,[r5]' in ARM mode\n/tmp/ccFKDlPU.s:2806: Error: selected processor does not support `ldrex r1,[r2]' in ARM mode\n/tmp/ccFKDlPU.s:2808: Error: selected processor does not support `strex r0,r1,[r2]' in ARM mode\n/tmp/ccFKDlPU.s:2880: Error: selected processor does not support `ldrex r1,[r2]' in ARM mode\n/tmp/ccFKDlPU.s:2882: Error: selected processor does not support `strex r0,r1,[r2]' in ARM mode\n/tmp/ccFKDlPU.s:2894: Error: selected processor does not support `ldrex r1,[r2]' in ARM mode\n/tmp/ccFKDlPU.s:2896: Error: selected processor does not support `strex r0,r1,[r2]' in ARM mode\n/tmp/ccFKDlPU.s:3472: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:3492: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:3578: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:3598: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:3820: Error: selected processor does not support `cpsid i' in ARM mode\n/tmp/ccFKDlPU.s:3893: Error: selected processor does not support `ldrex r3,[r6]' in ARM mode\n/tmp/ccFKDlPU.s:3895: Error: selected processor does not support `strex r2,r3,[r6]' in ARM mode\n/tmp/ccFKDlPU.s:3996: Error: selected processor does not support `ldrex r1,[r2]' in ARM mode\n/tmp/ccFKDlPU.s:3998: Error: selected processor does not support `strex r0,r1,[r2]' in ARM mode\n/tmp/ccFKDlPU.s:4343: Error: selected processor does not support `cpsid i' in ARM mode\n/tmp/ccFKDlPU.s:4397: Error: selected processor does not support `cpsid i' in ARM mode\n/tmp/ccFKDlPU.s:4439: Error: selected processor does not support `ldrex r3,[r5]' in ARM mode\n/tmp/ccFKDlPU.s:4441: Error: selected processor does not support `strex r2,r3,[r5]' in ARM mode\n/tmp/ccFKDlPU.s:4509: Error: selected processor does not support `ldrex r3,[r5]' in ARM mode\n/tmp/ccFKDlPU.s:4511: Error: selected processor does not support `strex r2,r3,[r5]' in ARM mode\n/tmp/ccFKDlPU.s:4608: Error: selected processor does not support `cpsid i' in ARM mode\n/tmp/ccFKDlPU.s:4645: Error: selected processor does not support `ldrex r3,[r4]' in ARM mode\n/tmp/ccFKDlPU.s:4647: Error: selected processor does not support `strex r2,r3,[r4]' in ARM mode\n/tmp/ccFKDlPU.s:5572: Error: selected processor does not support `ldrex r2,[r3]' in ARM mode\n/tmp/ccFKDlPU.s:5574: Error: selected processor does not support `strex r1,r2,[r3]' in ARM mode\n/tmp/ccFKDlPU.s:5587: Error: selected processor does not support `cpsid i' in ARM mode\n/tmp/ccFKDlPU.s:5617: Error: selected processor does not support `ldrex r3,[r4]' in ARM mode\n/tmp/ccFKDlPU.s:5619: Error: selected processor does not support `strex r2,r3,[r4]' in ARM mode\n/tmp/ccFKDlPU.s:5685: Error: selected processor does not support `ldrex r2,[r3]' in ARM mode\n/tmp/ccFKDlPU.s:5687: Error: selected processor does not support `strex r1,r2,[r3]' in ARM mode\n/tmp/ccFKDlPU.s:5751: Error: selected processor does not support `ldrex r0,[r2]' in ARM mode\n/tmp/ccFKDlPU.s:5754: Error: selected processor does not support `strexeq ip,r1,[r2]' in ARM mode\n/tmp/ccFKDlPU.s:6038: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6050: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6115: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6128: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6157: Error: selected processor does not support `ldrex r2,[r3]' in ARM mode\n/tmp/ccFKDlPU.s:6160: Error: selected processor does not support `strexeq r0,r1,[r3]' in ARM mode\n/tmp/ccFKDlPU.s:6267: Error: selected processor does not support `ldrex r2,[r8]' in ARM mode\n/tmp/ccFKDlPU.s:6270: Error: selected processor does not support `strexeq r5,r3,[r8]' in ARM mode\n/tmp/ccFKDlPU.s:6331: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6344: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6387: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6401: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6506: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6519: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6579: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6593: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6640: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6653: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6698: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6712: Error: selected processor does not support `isb ' in ARM mode\n/tmp/ccFKDlPU.s:6756: Error: selected processor does not support `ldrex r8,[r2]' in ARM mode\n/tmp/ccFKDlPU.s:6759: Error: selected processor does not support `strexeq r1,r3,[r2]' in ARM mode\nmake[1]: *** [scripts/Makefile.build:315: /tmp/staponWs6d/stap_21784_src.o] Error 1\nmake: *** [Makefile:1508: _module_/tmp/staponWs6d] Error 2\nWARNING: kbuild exited with status: 2\nPass 4: compilation failed. [man error::pass4]\n",
"status": "FAILED"
},
"systemd.SystemdBasicTests.test_systemd_basic": {
"log": "systemd is not the init manager for this image",
"status": "SKIPPED"
},
"systemd.SystemdBasicTests.test_systemd_failed": {
"log": "Test case systemd.SystemdBasicTests.test_systemd_failed depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
"status": "SKIPPED"
},
"systemd.SystemdBasicTests.test_systemd_list": {
"log": "Test case systemd.SystemdBasicTests.test_systemd_list depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
"status": "SKIPPED"
},
"systemd.SystemdJournalTests.test_systemd_boot_time": {
"log": "Test case systemd.SystemdJournalTests.test_systemd_boot_time depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
"status": "SKIPPED"
},
"systemd.SystemdJournalTests.test_systemd_journal": {
"log": "Test case systemd.SystemdJournalTests.test_systemd_journal depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
"status": "SKIPPED"
},
"systemd.SystemdServiceTests.test_systemd_disable_enable": {
"log": "Test case systemd.SystemdServiceTests.test_systemd_disable_enable depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.",
"status": "SKIPPED"
},
"systemd.SystemdServiceTests.test_systemd_status": {
"log": "Test case systemd.SystemdServiceTests.test_systemd_status depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
"status": "SKIPPED"
},
"systemd.SystemdServiceTests.test_systemd_stop_start": {
"log": "Test case systemd.SystemdServiceTests.test_systemd_stop_start depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.",
"status": "SKIPPED"
},
"xorg.XorgTest.test_xorg_running": {
"status": "PASSED"
}
}
}
}
|
