diff options
Diffstat (limited to '3.3_M3_RC1/3.3_M3_RC1_test_results/beaglebone/testresults.json')
| -rw-r--r-- | 3.3_M3_RC1/3.3_M3_RC1_test_results/beaglebone/testresults.json | 743 |
1 files changed, 743 insertions, 0 deletions
diff --git a/3.3_M3_RC1/3.3_M3_RC1_test_results/beaglebone/testresults.json b/3.3_M3_RC1/3.3_M3_RC1_test_results/beaglebone/testresults.json new file mode 100644 index 0000000000..0ea49ff579 --- /dev/null +++ b/3.3_M3_RC1/3.3_M3_RC1_test_results/beaglebone/testresults.json @@ -0,0 +1,743 @@ +{
+ "manual_bsp-hw_20210317161037": {
+ "configuration": {
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "LAYERS": {
+ "meta": {
+ "branch": "master",
+ "commit": "9fbbf40317743beacd8ac9d3f602765ed9d9fa6f",
+ "commit_count": 61395
+ },
+ "meta-poky": {
+ "branch": "master",
+ "commit": "9fbbf40317743beacd8ac9d3f602765ed9d9fa6f",
+ "commit_count": 61395
+ },
+ "meta-yocto-bsp": {
+ "branch": "master",
+ "commit": "9fbbf40317743beacd8ac9d3f602765ed9d9fa6f",
+ "commit_count": 61395
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20210317161037",
+ "TEST_MODULE": "bsp-hw",
+ "TEST_TYPE": "manual"
+ },
+ "result": {
+ "bsps-hw.bsps-hw.Add_multiple_files_in_media_player": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Check_if_RTC_(Real_Time_Clock)_can_work_correctly": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.Check_if_SATA_disk_can_work_correctly": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Check_if_watchdog_can_reset_the_target_system": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.Graphics_-_ABAT": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Graphics_-_x11perf_-_2D": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_HDD-drive": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_SD-drive": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.System_can_boot_up_via_NFS": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_Seek_bar_and_volume_control": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_HDD": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_SD": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_if_LAN_device_works_well_after_resume_from_suspend_state": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_if_usb_hid_device_works_well_after_resume_from_suspend_state": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.audio_-_play_(ogg)_with_HDMI": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.audio_-_play_(wav)_with_HDMI": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.boot_and_install_from_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.boot_from_runlevel_3": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.boot_from_runlevel_5": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.check_CPU_utilization_after_standby": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.click_terminal_icon_on_X_desktop": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.connman_offline_mode_in_connman-gnome": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.ethernet_get_IP_in_connman_via_DHCP": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.ethernet_static_ip_set_in_connman": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.live_boot_from_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.media_player_-_play_video_(ogv)": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.media_player_-_stop/play_button_(ogv)": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.standby": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.switch_among_multi_applications_and_desktop": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.video_-_libva_check_(ogg_video_play)": {
+ "status": "SKIPPED"
+ }
+ }
+ },
+ "runtime_core-image-sato-sdk_beaglebone-yocto_20210316055521": {
+ "configuration": {
+ "DISTRO": "poky",
+ "HOST_DISTRO": "ubuntu-18.04",
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "IMAGE_PKGTYPE": "rpm",
+ "LAYERS": {
+ "meta": {
+ "branch": "master",
+ "commit": "9fbbf40317743beacd8ac9d3f602765ed9d9fa6f",
+ "commit_count": 61395
+ },
+ "meta-poky": {
+ "branch": "master",
+ "commit": "9fbbf40317743beacd8ac9d3f602765ed9d9fa6f",
+ "commit_count": 61395
+ },
+ "meta-yocto-bsp": {
+ "branch": "master",
+ "commit": "9fbbf40317743beacd8ac9d3f602765ed9d9fa6f",
+ "commit_count": 61395
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20210316055521",
+ "TEST_TYPE": "runtime"
+ },
+ "result": {
+ "apt.AptRepoTest.test_apt_install_from_repo": {
+ "duration": 0.0002930164337158203,
+ "log": "Test requires apt to be installed",
+ "status": "SKIPPED"
+ },
+ "buildcpio.BuildCpioTest.test_cpio": {
+ "duration": 474.235107421875,
+ "status": "PASSED"
+ },
+ "buildgalculator.GalculatorTest.test_galculator": {
+ "duration": 0.001234292984008789,
+ "log": "Test requires gtk+3 to be installed",
+ "status": "SKIPPED"
+ },
+ "buildlzip.BuildLzipTest.test_lzip": {
+ "duration": 104.59215927124023,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_help": {
+ "duration": 0.2768821716308594,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_running": {
+ "duration": 0.30395054817199707,
+ "status": "PASSED"
+ },
+ "date.DateTest.test_date": {
+ "duration": 0.9545102119445801,
+ "status": "PASSED"
+ },
+ "df.DfTest.test_df": {
+ "duration": 0.2730066776275635,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_help": {
+ "duration": 9.281718730926514,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_history": {
+ "duration": 7.486827850341797,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_info": {
+ "duration": 5.807831525802612,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_search": {
+ "duration": 4.293615341186523,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_version": {
+ "duration": 4.119302272796631,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_exclude": {
+ "duration": 99.120436668396,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install": {
+ "duration": 17.143515586853027,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_dependency": {
+ "duration": 17.135925769805908,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_disk": {
+ "duration": 21.973772287368774,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_http": {
+ "duration": 17.065300226211548,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot": {
+ "duration": 51.111780881881714,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": {
+ "duration": 0.0007212162017822266,
+ "log": "Test run when enable usrmege",
+ "status": "SKIPPED"
+ },
+ "dnf.DnfRepoTest.test_dnf_makecache": {
+ "duration": 3.8902528285980225,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_reinstall": {
+ "duration": 6.274228811264038,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_repoinfo": {
+ "duration": 4.373618125915527,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gcc_compile": {
+ "duration": 2.390604019165039,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp2_compile": {
+ "duration": 2.6303889751434326,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp_compile": {
+ "duration": 3.224428176879883,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_make": {
+ "duration": 2.2531704902648926,
+ "status": "PASSED"
+ },
+ "gi.GObjectIntrospectionTest.test_python": {
+ "duration": 1.787278175354004,
+ "status": "PASSED"
+ },
+ "kernelmodule.KernelModuleTest.test_kernel_module": {
+ "duration": 119.9915087223053,
+ "status": "PASSED"
+ },
+ "ldd.LddTest.test_ldd": {
+ "duration": 0.8161764144897461,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_newlog": {
+ "duration": 1.4825634956359863,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_wtmp": {
+ "duration": 1.2423210144042969,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTest.test_syslog_running": {
+ "duration": 0.28104329109191895,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_logger": {
+ "duration": 1.4734857082366943,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_restart": {
+ "duration": 2.47074294090271,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_startup_config": {
+ "duration": 5.6731791496276855,
+ "status": "PASSED"
+ },
+ "opkg.OpkgRepoTest.test_opkg_install_from_repo": {
+ "duration": 0.0005550384521484375,
+ "log": "Test requires opkg to be installed",
+ "status": "SKIPPED"
+ },
+ "pam.PamBasicTest.test_pam": {
+ "duration": 0.0007054805755615234,
+ "log": "Test requires pam to be in DISTRO_FEATURES",
+ "status": "SKIPPED"
+ },
+ "parselogs.ParseLogsTest.test_parselogs": {
+ "duration": 4.9690775871276855,
+ "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 380, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 18 != 0 : Log: /buildarea4/yzhao1/yocto/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 0.133382] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.092132] CPU0: Spectre v2: using BPIALL workaround\n[ 0.093390] Setting up static identity map for 0x80100000 - 0x80100060\n[ 0.093562] rcu: Hierarchical SRCU implementation.\n[ 0.094905] devtmpfs: initialized\n[ 0.109304] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3\n[ 0.109604] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.109634] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.111133] pinctrl core: initialized pinctrl subsystem\n[ 0.112380] NET: Registered protocol family 16\n[ 0.115060] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.133382] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.134721] thermal_sys: Registered thermal governor 'step_wise'\n[ 0.135095] cpuidle: using governor ladder\n[ 0.135141] cpuidle: using governor menu\n[ 1.268575] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 1.269787] Serial: AMBA PL011 UART driver\n[ 1.291354] Kprobes globally optimized\n[ 1.460642] raid6: int32x8 gen() 170 MB/s\n[ 1.630873] raid6: int32x8 xor() 108 MB/s\n[ 1.800541] raid6: int32x4 gen() 199 MB/s\n[ 1.970557] raid6: int32x4 xor() 118 MB/s\n\n***********************\nCentral error: [ 3.744519] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.565198] xor: measuring software checksum speed\n[ 3.573117] arm4regs : 1274 MB/sec\n[ 3.583722] 8regs : 939 MB/sec\n[ 3.591512] 32regs : 1273 MB/sec\n[ 3.591523] xor: using function: arm4regs (1274 MB/sec)\n[ 3.591547] Key type asymmetric registered\n[ 3.591557] Asymmetric key parser 'x509' registered\n[ 3.591649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591663] io scheduler mq-deadline registered\n[ 3.591671] io scheduler kyber registered\n[ 3.744519] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744556] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973692] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973732] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034632] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034668] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046674] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046707] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111923] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111969] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134759] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n\n***********************\nCentral error: [ 3.973692] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.583722] 8regs : 939 MB/sec\n[ 3.591512] 32regs : 1273 MB/sec\n[ 3.591523] xor: using function: arm4regs (1274 MB/sec)\n[ 3.591547] Key type asymmetric registered\n[ 3.591557] Asymmetric key parser 'x509' registered\n[ 3.591649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591663] io scheduler mq-deadline registered\n[ 3.591671] io scheduler kyber registered\n[ 3.744519] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744556] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973692] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973732] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034632] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034668] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046674] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046707] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111923] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111969] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134759] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.143788] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.146436] printk: console [ttyS0] disabled\n\n***********************\nCentral error: [ 4.034632] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.591523] xor: using function: arm4regs (1274 MB/sec)\n[ 3.591547] Key type asymmetric registered\n[ 3.591557] Asymmetric key parser 'x509' registered\n[ 3.591649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591663] io scheduler mq-deadline registered\n[ 3.591671] io scheduler kyber registered\n[ 3.744519] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744556] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973692] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973732] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034632] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034668] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046674] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046707] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111923] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111969] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134759] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.143788] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.146436] printk: console [ttyS0] disabled\n[ 4.146554] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.704691] printk: console [ttyS0] enabled\n\n***********************\nCentral error: [ 4.046674] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.591557] Asymmetric key parser 'x509' registered\n[ 3.591649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591663] io scheduler mq-deadline registered\n[ 3.591671] io scheduler kyber registered\n[ 3.744519] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744556] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973692] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973732] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034632] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034668] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046674] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046707] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111923] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111969] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134759] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.143788] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.146436] printk: console [ttyS0] disabled\n[ 4.146554] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.704691] printk: console [ttyS0] enabled\n[ 4.710289] omap_rng 48310000.rng: Random Number Generator ver. 20\n[ 4.718790] random: crng init done\n\n***********************\nCentral error: [ 5.140643] tps65217-pmic: Failed to locate of_node [id: -1]\n***********************\n[ 5.046560] ThumbEE CPU extension supported.\n[ 5.049545] omap_voltage_late_init: Voltage driver support not added\n[ 5.063641] Loading compiled-in X.509 certificates\n[ 5.067257] Key type ._fscrypt registered\n[ 5.070428] Key type .fscrypt registered\n[ 5.073065] Key type fscrypt-provisioning registered\n[ 5.078453] Btrfs loaded, crc32c=crc32c-generic\n[ 5.084197] Key type encrypted registered\n[ 5.094916] mmc0: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA\n[ 5.113491] OMAP GPIO hardware version 0.1\n[ 5.140643] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.152492] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.159564] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.164767] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.172388] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.180209] mmc0: new high speed MMC card at address 0001\n[ 5.187373] mmcblk0: mmc0:0001 MMC02G 1.79 GiB \n[ 5.196534] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB\n[ 5.202229] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 5.209671] sdhci-omap 48060000.mmc: Got CD GPIO\n[ 5.214155] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n\n***********************\nCentral error: [ 5.152492] tps65217-bl: Failed to locate of_node [id: -1]\n***********************\n[ 5.049545] omap_voltage_late_init: Voltage driver support not added\n[ 5.063641] Loading compiled-in X.509 certificates\n[ 5.067257] Key type ._fscrypt registered\n[ 5.070428] Key type .fscrypt registered\n[ 5.073065] Key type fscrypt-provisioning registered\n[ 5.078453] Btrfs loaded, crc32c=crc32c-generic\n[ 5.084197] Key type encrypted registered\n[ 5.094916] mmc0: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA\n[ 5.113491] OMAP GPIO hardware version 0.1\n[ 5.140643] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.152492] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.159564] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.164767] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.172388] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.180209] mmc0: new high speed MMC card at address 0001\n[ 5.187373] mmcblk0: mmc0:0001 MMC02G 1.79 GiB \n[ 5.196534] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB\n[ 5.202229] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 5.209671] sdhci-omap 48060000.mmc: Got CD GPIO\n[ 5.214155] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n[ 5.219296] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator\n\n***********************\nCentral error: [ 5.371102] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n***********************\n[ 5.214155] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n[ 5.219296] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator\n[ 5.225739] mmcblk0rpmb: mmc0:0001 MMC02G partition 3 128 KiB, chardev (249:0)\n[ 5.289798] mmc1: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA\n[ 5.330085] mmc1: new high speed SDHC card at address 1234\n[ 5.335199] mmcblk1: mmc1:1234 SA32G 28.9 GiB \n[ 5.340833] mmcblk1: p1 p2\n[ 5.352499] tda998x 0-0070: found TDA19988\n[ 5.358473] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)\n[ 5.364484] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0\n[ 5.371102] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.377215] printk: console [netcon0] enabled\n[ 5.380439] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 5.385943] netconsole: network logging started\n[ 5.390500] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.396097] cfg80211: Loading compiled-in X.509 certificates for regulatory database\n[ 5.406497] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\n[ 5.412243] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n[ 5.419597] cfg80211: failed to load regulatory.db\n[ 5.437503] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)\n[ 5.444737] VFS: Mounted root (ext4 filesystem) readonly on device 179:26.\n\n***********************\nCentral error: [ 5.390500] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n***********************\n[ 5.330085] mmc1: new high speed SDHC card at address 1234\n[ 5.335199] mmcblk1: mmc1:1234 SA32G 28.9 GiB \n[ 5.340833] mmcblk1: p1 p2\n[ 5.352499] tda998x 0-0070: found TDA19988\n[ 5.358473] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)\n[ 5.364484] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0\n[ 5.371102] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.377215] printk: console [netcon0] enabled\n[ 5.380439] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 5.385943] netconsole: network logging started\n[ 5.390500] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.396097] cfg80211: Loading compiled-in X.509 certificates for regulatory database\n[ 5.406497] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\n[ 5.412243] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n[ 5.419597] cfg80211: failed to load regulatory.db\n[ 5.437503] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)\n[ 5.444737] VFS: Mounted root (ext4 filesystem) readonly on device 179:26.\n[ 5.452081] devtmpfs: mounted\n[ 5.458065] Freeing unused kernel memory: 1024K\n[ 5.470690] Run /sbin/init as init process\n[ 5.473503] with arguments:\n\n***********************\nLog: /buildarea4/yzhao1/yocto/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg\n-----------------------\nCentral error: [ 0.133382] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.092132] CPU0: Spectre v2: using BPIALL workaround\n[ 0.093390] Setting up static identity map for 0x80100000 - 0x80100060\n[ 0.093562] rcu: Hierarchical SRCU implementation.\n[ 0.094905] devtmpfs: initialized\n[ 0.109304] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3\n[ 0.109604] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.109634] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.111133] pinctrl core: initialized pinctrl subsystem\n[ 0.112380] NET: Registered protocol family 16\n[ 0.115060] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.133382] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.134721] thermal_sys: Registered thermal governor 'step_wise'\n[ 0.135095] cpuidle: using governor ladder\n[ 0.135141] cpuidle: using governor menu\n[ 1.268575] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 1.269787] Serial: AMBA PL011 UART driver\n[ 1.291354] Kprobes globally optimized\n[ 1.460642] raid6: int32x8 gen() 170 MB/s\n[ 1.630873] raid6: int32x8 xor() 108 MB/s\n[ 1.800541] raid6: int32x4 gen() 199 MB/s\n[ 1.970557] raid6: int32x4 xor() 118 MB/s\n\n***********************\nCentral error: [ 3.744519] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.565198] xor: measuring software checksum speed\n[ 3.573117] arm4regs : 1274 MB/sec\n[ 3.583722] 8regs : 939 MB/sec\n[ 3.591512] 32regs : 1273 MB/sec\n[ 3.591523] xor: using function: arm4regs (1274 MB/sec)\n[ 3.591547] Key type asymmetric registered\n[ 3.591557] Asymmetric key parser 'x509' registered\n[ 3.591649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591663] io scheduler mq-deadline registered\n[ 3.591671] io scheduler kyber registered\n[ 3.744519] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744556] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973692] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973732] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034632] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034668] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046674] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046707] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111923] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111969] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134759] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n\n***********************\nCentral error: [ 3.973692] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.583722] 8regs : 939 MB/sec\n[ 3.591512] 32regs : 1273 MB/sec\n[ 3.591523] xor: using function: arm4regs (1274 MB/sec)\n[ 3.591547] Key type asymmetric registered\n[ 3.591557] Asymmetric key parser 'x509' registered\n[ 3.591649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591663] io scheduler mq-deadline registered\n[ 3.591671] io scheduler kyber registered\n[ 3.744519] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744556] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973692] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973732] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034632] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034668] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046674] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046707] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111923] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111969] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134759] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.143788] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.146436] printk: console [ttyS0] disabled\n\n***********************\nCentral error: [ 4.034632] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.591523] xor: using function: arm4regs (1274 MB/sec)\n[ 3.591547] Key type asymmetric registered\n[ 3.591557] Asymmetric key parser 'x509' registered\n[ 3.591649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591663] io scheduler mq-deadline registered\n[ 3.591671] io scheduler kyber registered\n[ 3.744519] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744556] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973692] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973732] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034632] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034668] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046674] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046707] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111923] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111969] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134759] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.143788] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.146436] printk: console [ttyS0] disabled\n[ 4.146554] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.704691] printk: console [ttyS0] enabled\n\n***********************\nCentral error: [ 4.046674] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.591557] Asymmetric key parser 'x509' registered\n[ 3.591649] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.591663] io scheduler mq-deadline registered\n[ 3.591671] io scheduler kyber registered\n[ 3.744519] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.744556] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.973692] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.973732] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 4.034632] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.034668] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.046674] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.046707] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.111923] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.111969] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.134759] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.143788] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.146436] printk: console [ttyS0] disabled\n[ 4.146554] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.704691] printk: console [ttyS0] enabled\n[ 4.710289] omap_rng 48310000.rng: Random Number Generator ver. 20\n[ 4.718790] random: crng init done\n\n***********************\nCentral error: [ 5.140643] tps65217-pmic: Failed to locate of_node [id: -1]\n***********************\n[ 5.046560] ThumbEE CPU extension supported.\n[ 5.049545] omap_voltage_late_init: Voltage driver support not added\n[ 5.063641] Loading compiled-in X.509 certificates\n[ 5.067257] Key type ._fscrypt registered\n[ 5.070428] Key type .fscrypt registered\n[ 5.073065] Key type fscrypt-provisioning registered\n[ 5.078453] Btrfs loaded, crc32c=crc32c-generic\n[ 5.084197] Key type encrypted registered\n[ 5.094916] mmc0: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA\n[ 5.113491] OMAP GPIO hardware version 0.1\n[ 5.140643] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.152492] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.159564] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.164767] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.172388] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.180209] mmc0: new high speed MMC card at address 0001\n[ 5.187373] mmcblk0: mmc0:0001 MMC02G 1.79 GiB \n[ 5.196534] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB\n[ 5.202229] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 5.209671] sdhci-omap 48060000.mmc: Got CD GPIO\n[ 5.214155] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n\n***********************\nCentral error: [ 5.152492] tps65217-bl: Failed to locate of_node [id: -1]\n***********************\n[ 5.049545] omap_voltage_late_init: Voltage driver support not added\n[ 5.063641] Loading compiled-in X.509 certificates\n[ 5.067257] Key type ._fscrypt registered\n[ 5.070428] Key type .fscrypt registered\n[ 5.073065] Key type fscrypt-provisioning registered\n[ 5.078453] Btrfs loaded, crc32c=crc32c-generic\n[ 5.084197] Key type encrypted registered\n[ 5.094916] mmc0: SDHCI controller on 481d8000.mmc [481d8000.mmc] using External DMA\n[ 5.113491] OMAP GPIO hardware version 0.1\n[ 5.140643] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.152492] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.159564] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.164767] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.172388] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.180209] mmc0: new high speed MMC card at address 0001\n[ 5.187373] mmcblk0: mmc0:0001 MMC02G 1.79 GiB \n[ 5.196534] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB\n[ 5.202229] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 5.209671] sdhci-omap 48060000.mmc: Got CD GPIO\n[ 5.214155] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n[ 5.219296] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator\n\n***********************\nCentral error: [ 5.371102] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n***********************\n[ 5.214155] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n[ 5.219296] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator\n[ 5.225739] mmcblk0rpmb: mmc0:0001 MMC02G partition 3 128 KiB, chardev (249:0)\n[ 5.289798] mmc1: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA\n[ 5.330085] mmc1: new high speed SDHC card at address 1234\n[ 5.335199] mmcblk1: mmc1:1234 SA32G 28.9 GiB \n[ 5.340833] mmcblk1: p1 p2\n[ 5.352499] tda998x 0-0070: found TDA19988\n[ 5.358473] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)\n[ 5.364484] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0\n[ 5.371102] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.377215] printk: console [netcon0] enabled\n[ 5.380439] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 5.385943] netconsole: network logging started\n[ 5.390500] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.396097] cfg80211: Loading compiled-in X.509 certificates for regulatory database\n[ 5.406497] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\n[ 5.412243] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n[ 5.419597] cfg80211: failed to load regulatory.db\n[ 5.437503] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)\n[ 5.444737] VFS: Mounted root (ext4 filesystem) readonly on device 179:26.\n\n***********************\nCentral error: [ 5.390500] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n***********************\n[ 5.330085] mmc1: new high speed SDHC card at address 1234\n[ 5.335199] mmcblk1: mmc1:1234 SA32G 28.9 GiB \n[ 5.340833] mmcblk1: p1 p2\n[ 5.352499] tda998x 0-0070: found TDA19988\n[ 5.358473] tilcdc 4830e000.lcdc: bound 0-0070 (ops tda998x_ops)\n[ 5.364484] [drm] Initialized tilcdc 1.0.0 20121205 for 4830e000.lcdc on minor 0\n[ 5.371102] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.377215] printk: console [netcon0] enabled\n[ 5.380439] usb 1-1: new high-speed USB device number 2 using musb-hdrc\n[ 5.385943] netconsole: network logging started\n[ 5.390500] tilcdc 4830e000.lcdc: [drm] Cannot find any crtc or sizes\n[ 5.396097] cfg80211: Loading compiled-in X.509 certificates for regulatory database\n[ 5.406497] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'\n[ 5.412243] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2\n[ 5.419597] cfg80211: failed to load regulatory.db\n[ 5.437503] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)\n[ 5.444737] VFS: Mounted root (ext4 filesystem) readonly on device 179:26.\n[ 5.452081] devtmpfs: mounted\n[ 5.458065] Freeing unused kernel memory: 1024K\n[ 5.470690] Run /sbin/init as init process\n[ 5.473503] with arguments:\n\n***********************\n18 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n",
+ "status": "FAILED"
+ },
+ "perl.PerlTest.test_perl_works": {
+ "duration": 0.25808000564575195,
+ "status": "PASSED"
+ },
+ "ping.PingTest.test_ping": {
+ "duration": 0.03689002990722656,
+ "status": "PASSED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectfail": {
+ "duration": 0.0005996227264404297,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectsuccess": {
+ "duration": 0.00039768218994140625,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "python.PythonTest.test_python3": {
+ "duration": 0.4732818603515625,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_help": {
+ "duration": 0.28313732147216797,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query": {
+ "duration": 0.5239670276641846,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query_nonroot": {
+ "duration": 5.208110332489014,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": {
+ "duration": 29.0158634185791,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_install": {
+ "duration": 2.1448357105255127,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_remove": {
+ "duration": 1.466712236404419,
+ "status": "PASSED"
+ },
+ "scp.ScpTest.test_scp_file": {
+ "duration": 1.3561370372772217,
+ "status": "PASSED"
+ },
+ "ssh.SSHTest.test_ssh": {
+ "duration": 0.4900784492492676,
+ "status": "PASSED"
+ },
+ "stap.StapTest.test_stap": {
+ "duration": 271.428010225296,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_basic": {
+ "duration": 0.0006072521209716797,
+ "log": "systemd is not the init manager for this image",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_failed": {
+ "duration": 0.0005118846893310547,
+ "log": "Test case systemd.SystemdBasicTests.test_systemd_failed depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_list": {
+ "duration": 0.0003733634948730469,
+ "log": "Test case systemd.SystemdBasicTests.test_systemd_list depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_boot_time": {
+ "duration": 0.0003917217254638672,
+ "log": "Test case systemd.SystemdJournalTests.test_systemd_boot_time depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_journal": {
+ "duration": 0.0003561973571777344,
+ "log": "Test case systemd.SystemdJournalTests.test_systemd_journal depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable": {
+ "duration": 0.0005180835723876953,
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_disable_enable depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable_ro": {
+ "duration": 0.00039887428283691406,
+ "log": "Test is only meant to run with read-only-rootfs in IMAGE_FEATURES",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_status": {
+ "duration": 0.0003731250762939453,
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_status depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_stop_start": {
+ "duration": 0.00035381317138671875,
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_stop_start depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_wayland_info": {
+ "duration": 0.0004470348358154297,
+ "log": "Test requires wayland-utils to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_can_initialize_new_wayland_compositor": {
+ "duration": 0.00037217140197753906,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_running": {
+ "duration": 0.0003705024719238281,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "xorg.XorgTest.test_xorg_running": {
+ "duration": 0.5938906669616699,
+ "status": "PASSED"
+ }
+ }
+ },
+ "runtime_core-image-sato-sdk_beaglebone-yocto_20210317075633": {
+ "configuration": {
+ "DISTRO": "poky-altcfg",
+ "HOST_DISTRO": "ubuntu-18.04",
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "IMAGE_PKGTYPE": "rpm",
+ "LAYERS": {
+ "meta": {
+ "branch": "master",
+ "commit": "9fbbf40317743beacd8ac9d3f602765ed9d9fa6f",
+ "commit_count": 61395
+ },
+ "meta-poky": {
+ "branch": "master",
+ "commit": "9fbbf40317743beacd8ac9d3f602765ed9d9fa6f",
+ "commit_count": 61395
+ },
+ "meta-yocto-bsp": {
+ "branch": "master",
+ "commit": "9fbbf40317743beacd8ac9d3f602765ed9d9fa6f",
+ "commit_count": 61395
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20210317075633",
+ "TEST_TYPE": "runtime"
+ },
+ "result": {
+ "apt.AptRepoTest.test_apt_install_from_repo": {
+ "duration": 0.0002918243408203125,
+ "log": "Test requires apt to be installed",
+ "status": "SKIPPED"
+ },
+ "buildcpio.BuildCpioTest.test_cpio": {
+ "duration": 482.9698214530945,
+ "status": "PASSED"
+ },
+ "buildgalculator.GalculatorTest.test_galculator": {
+ "duration": 0.0011975765228271484,
+ "log": "Test requires gtk+3 to be installed",
+ "status": "SKIPPED"
+ },
+ "buildlzip.BuildLzipTest.test_lzip": {
+ "duration": 104.46464514732361,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_help": {
+ "duration": 0.534637451171875,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_running": {
+ "duration": 0.5582764148712158,
+ "status": "PASSED"
+ },
+ "date.DateTest.test_date": {
+ "duration": 8.376211643218994,
+ "status": "PASSED"
+ },
+ "df.DfTest.test_df": {
+ "duration": 0.5996029376983643,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_help": {
+ "duration": 9.450045585632324,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_history": {
+ "duration": 6.910254955291748,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_info": {
+ "duration": 4.6194281578063965,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_search": {
+ "duration": 4.578181505203247,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_version": {
+ "duration": 4.4051268100738525,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_exclude": {
+ "duration": 93.03816771507263,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install": {
+ "duration": 18.05261492729187,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_dependency": {
+ "duration": 28.48198413848877,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_disk": {
+ "duration": 33.38453435897827,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_http": {
+ "duration": 28.126380443572998,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot": {
+ "duration": 56.25031018257141,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": {
+ "duration": 0.0007212162017822266,
+ "log": "Test run when enable usrmege",
+ "status": "SKIPPED"
+ },
+ "dnf.DnfRepoTest.test_dnf_makecache": {
+ "duration": 4.160556077957153,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_reinstall": {
+ "duration": 6.776508092880249,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_repoinfo": {
+ "duration": 4.674839735031128,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gcc_compile": {
+ "duration": 3.917689800262451,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp2_compile": {
+ "duration": 9.151984453201294,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp_compile": {
+ "duration": 4.795612573623657,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_make": {
+ "duration": 3.253730297088623,
+ "status": "PASSED"
+ },
+ "gi.GObjectIntrospectionTest.test_python": {
+ "duration": 2.0103600025177,
+ "status": "PASSED"
+ },
+ "kernelmodule.KernelModuleTest.test_kernel_module": {
+ "duration": 130.58700847625732,
+ "status": "PASSED"
+ },
+ "ldd.LddTest.test_ldd": {
+ "duration": 1.5465471744537354,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_newlog": {
+ "duration": 2.92328143119812,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_wtmp": {
+ "duration": 2.4403910636901855,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTest.test_syslog_running": {
+ "duration": 0.5304250717163086,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_logger": {
+ "duration": 1.9166193008422852,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_restart": {
+ "duration": 1.107661485671997,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_startup_config": {
+ "duration": 0.0005383491516113281,
+ "log": "Not appropiate for systemd image",
+ "status": "SKIPPED"
+ },
+ "opkg.OpkgRepoTest.test_opkg_install_from_repo": {
+ "duration": 0.0005202293395996094,
+ "log": "Test requires opkg to be installed",
+ "status": "SKIPPED"
+ },
+ "pam.PamBasicTest.test_pam": {
+ "duration": 1.9758737087249756,
+ "status": "PASSED"
+ },
+ "parselogs.ParseLogsTest.test_parselogs": {
+ "duration": 8.898077011108398,
+ "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 380, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 2 != 0 : Log: /buildarea4/yzhao1/yocto/build-beaglebone-alt/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 0.428380] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.107476] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.107502] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.108919] xor: measuring software checksum speed\n[ 0.199054] arm4regs : 1221.600 MB/sec\n[ 0.298998] 8regs : 905.200 MB/sec\n[ 0.398994] 32regs : 1220.800 MB/sec\n[ 0.399001] xor: using function: arm4regs (1221.600 MB/sec)\n[ 0.399020] pinctrl core: initialized pinctrl subsystem\n[ 0.400237] NET: Registered protocol family 16\n[ 0.402800] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.428380] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.430713] cpuidle: using governor ladder\n[ 0.430752] cpuidle: using governor menu\n[ 0.448177] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.449540] Serial: AMBA PL011 UART driver\n[ 0.629292] raid6: int32x8 gen() 152 MB/s\n[ 0.799496] raid6: int32x8 xor() 102 MB/s\n[ 0.969306] raid6: int32x4 gen() 160 MB/s\n[ 1.139160] raid6: int32x4 xor() 116 MB/s\n[ 1.309058] raid6: int32x2 gen() 286 MB/s\n[ 1.479077] raid6: int32x2 xor() 187 MB/s\n\n***********************\nCentral error: [ 3.334189] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.189224] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.194675] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.198972] usbcore: registered new interface driver usb-storage\n[ 3.206650] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.226128] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.255055] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.259716] i2c /dev entries driver\n[ 3.263116] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.270933] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.278515] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.334189] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.344984] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.352822] usbcore: registered new interface driver usbhid\n[ 3.357329] usbhid: USB HID core driver\n[ 3.360040] mmc0: new high speed SDHC card at address 1234\n[ 3.365477] oprofile: using arm/armv7\n[ 3.368788] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.372141] u32 classifier\n[ 3.373552] input device check on\n[ 3.377449] Actions configured\n[ 3.380519] NET: Registered protocol family 10\n\n***********************\n2 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n",
+ "status": "FAILED"
+ },
+ "perl.PerlTest.test_perl_works": {
+ "duration": 0.4901127815246582,
+ "status": "PASSED"
+ },
+ "ping.PingTest.test_ping": {
+ "duration": 0.03749203681945801,
+ "status": "PASSED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectfail": {
+ "duration": 0.0005571842193603516,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectsuccess": {
+ "duration": 0.0004246234893798828,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "python.PythonTest.test_python3": {
+ "duration": 0.7137470245361328,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_help": {
+ "duration": 0.5209529399871826,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query": {
+ "duration": 1.0154392719268799,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query_nonroot": {
+ "duration": 6.982595920562744,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": {
+ "duration": 36.57467174530029,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_install": {
+ "duration": 2.9514033794403076,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_remove": {
+ "duration": 1.3668437004089355,
+ "status": "PASSED"
+ },
+ "scp.ScpTest.test_scp_file": {
+ "duration": 2.040433883666992,
+ "status": "PASSED"
+ },
+ "ssh.SSHTest.test_ssh": {
+ "duration": 0.9756779670715332,
+ "status": "PASSED"
+ },
+ "stap.StapTest.test_stap": {
+ "duration": 248.67321395874023,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_basic": {
+ "duration": 0.49749755859375,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_failed": {
+ "duration": 1.0432734489440918,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_list": {
+ "duration": 3.901401996612549,
+ "status": "PASSED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_boot_time": {
+ "duration": 0.6453762054443359,
+ "status": "PASSED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_journal": {
+ "duration": 0.847337007522583,
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable": {
+ "duration": 7.034211874008179,
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable_ro": {
+ "duration": 0.0006084442138671875,
+ "log": "Test is only meant to run with read-only-rootfs in IMAGE_FEATURES",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_status": {
+ "duration": 0.5584633350372314,
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_stop_start": {
+ "duration": 2.342654228210449,
+ "status": "PASSED"
+ },
+ "weston.WestonTest.test_wayland_info": {
+ "duration": 0.0005733966827392578,
+ "log": "Test requires wayland-utils to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_can_initialize_new_wayland_compositor": {
+ "duration": 0.000396728515625,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_running": {
+ "duration": 0.00038242340087890625,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "xorg.XorgTest.test_xorg_running": {
+ "duration": 1.1246466636657715,
+ "status": "PASSED"
+ }
+ }
+ }
+}
\ No newline at end of file |