diff options
Diffstat (limited to '3.3_M2_RC1/3.3_M2_RC1_test_results/beaglebone/testresults.json')
| -rw-r--r-- | 3.3_M2_RC1/3.3_M2_RC1_test_results/beaglebone/testresults.json | 743 |
1 files changed, 743 insertions, 0 deletions
diff --git a/3.3_M2_RC1/3.3_M2_RC1_test_results/beaglebone/testresults.json b/3.3_M2_RC1/3.3_M2_RC1_test_results/beaglebone/testresults.json new file mode 100644 index 0000000000..12bd24b59c --- /dev/null +++ b/3.3_M2_RC1/3.3_M2_RC1_test_results/beaglebone/testresults.json @@ -0,0 +1,743 @@ +{
+ "manual_bsp-hw_20210126143246": {
+ "configuration": {
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "LAYERS": {
+ "meta": {
+ "branch": "master",
+ "commit": "b5e634644b69a968a93aad0dd0502cf479d3973a",
+ "commit_count": 60735
+ },
+ "meta-poky": {
+ "branch": "master",
+ "commit": "b5e634644b69a968a93aad0dd0502cf479d3973a",
+ "commit_count": 60735
+ },
+ "meta-yocto-bsp": {
+ "branch": "master",
+ "commit": "b5e634644b69a968a93aad0dd0502cf479d3973a",
+ "commit_count": 60735
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20210126143246",
+ "TEST_MODULE": "bsp-hw",
+ "TEST_TYPE": "manual"
+ },
+ "result": {
+ "bsps-hw.bsps-hw.Add_multiple_files_in_media_player": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Check_if_RTC_(Real_Time_Clock)_can_work_correctly": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.Check_if_SATA_disk_can_work_correctly": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Check_if_watchdog_can_reset_the_target_system": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.Graphics_-_ABAT": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Graphics_-_x11perf_-_2D": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_HDD-drive": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_SD-drive": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.System_can_boot_up_via_NFS": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_Seek_bar_and_volume_control": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_HDD": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_SD": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_boot_on_serial_communication_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_if_LAN_device_works_well_after_resume_from_suspend_state": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.Test_if_usb_hid_device_works_well_after_resume_from_suspend_state": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.audio_-_play_(ogg)_with_HDMI": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.audio_-_play_(wav)_with_HDMI": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.boot_and_install_from_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.boot_from_runlevel_3": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.boot_from_runlevel_5": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.check_CPU_utilization_after_standby": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.click_terminal_icon_on_X_desktop": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.connman_offline_mode_in_connman-gnome": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.ethernet_get_IP_in_connman_via_DHCP": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.ethernet_static_ip_set_in_connman": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.live_boot_from_USB": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.media_player_-_play_video_(ogv)": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.media_player_-_stop/play_button_(ogv)": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.standby": {
+ "status": "SKIPPED"
+ },
+ "bsps-hw.bsps-hw.switch_among_multi_applications_and_desktop": {
+ "status": "PASSED"
+ },
+ "bsps-hw.bsps-hw.video_-_libva_check_(ogg_video_play)": {
+ "status": "SKIPPED"
+ }
+ }
+ },
+ "runtime_core-image-sato-sdk_beaglebone-yocto_20210125074757": {
+ "configuration": {
+ "DISTRO": "poky",
+ "HOST_DISTRO": "ubuntu-18.04",
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "IMAGE_PKGTYPE": "rpm",
+ "LAYERS": {
+ "meta": {
+ "branch": "master",
+ "commit": "b5e634644b69a968a93aad0dd0502cf479d3973a",
+ "commit_count": 60735
+ },
+ "meta-poky": {
+ "branch": "master",
+ "commit": "b5e634644b69a968a93aad0dd0502cf479d3973a",
+ "commit_count": 60735
+ },
+ "meta-yocto-bsp": {
+ "branch": "master",
+ "commit": "b5e634644b69a968a93aad0dd0502cf479d3973a",
+ "commit_count": 60735
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20210125074757",
+ "TEST_TYPE": "runtime"
+ },
+ "result": {
+ "apt.AptRepoTest.test_apt_install_from_repo": {
+ "duration": 0.00037980079650878906,
+ "log": "Test requires apt to be installed",
+ "status": "SKIPPED"
+ },
+ "buildcpio.BuildCpioTest.test_cpio": {
+ "duration": 492.5036470890045,
+ "status": "PASSED"
+ },
+ "buildgalculator.GalculatorTest.test_galculator": {
+ "duration": 0.0007524490356445312,
+ "log": "Test requires gtk+3 to be installed",
+ "status": "SKIPPED"
+ },
+ "buildlzip.BuildLzipTest.test_lzip": {
+ "duration": 105.4249038696289,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_help": {
+ "duration": 0.28960514068603516,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_running": {
+ "duration": 0.4317498207092285,
+ "status": "PASSED"
+ },
+ "date.DateTest.test_date": {
+ "duration": 1.0380604267120361,
+ "status": "PASSED"
+ },
+ "df.DfTest.test_df": {
+ "duration": 0.2873554229736328,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_help": {
+ "duration": 9.392478704452515,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_history": {
+ "duration": 6.71463680267334,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_info": {
+ "duration": 4.448935508728027,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_search": {
+ "duration": 4.409745693206787,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_version": {
+ "duration": 4.224893093109131,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_exclude": {
+ "duration": 92.16749572753906,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install": {
+ "duration": 17.41163444519043,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_dependency": {
+ "duration": 19.077533721923828,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_disk": {
+ "duration": 22.53205108642578,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_http": {
+ "duration": 17.41080927848816,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot": {
+ "duration": 53.42471098899841,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": {
+ "duration": 0.0004162788391113281,
+ "log": "Test run when enable usrmege",
+ "status": "SKIPPED"
+ },
+ "dnf.DnfRepoTest.test_dnf_makecache": {
+ "duration": 4.047728061676025,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_reinstall": {
+ "duration": 6.181455612182617,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_repoinfo": {
+ "duration": 4.644563913345337,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gcc_compile": {
+ "duration": 3.3963329792022705,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp2_compile": {
+ "duration": 3.2317404747009277,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp_compile": {
+ "duration": 4.096049070358276,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_make": {
+ "duration": 2.9409444332122803,
+ "status": "PASSED"
+ },
+ "gi.GObjectIntrospectionTest.test_python": {
+ "duration": 1.8259084224700928,
+ "status": "PASSED"
+ },
+ "kernelmodule.KernelModuleTest.test_kernel_module": {
+ "duration": 124.05361557006836,
+ "status": "PASSED"
+ },
+ "ldd.LddTest.test_ldd": {
+ "duration": 0.949711799621582,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_newlog": {
+ "duration": 1.880005121231079,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_wtmp": {
+ "duration": 1.368227243423462,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTest.test_syslog_running": {
+ "duration": 0.3287513256072998,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_logger": {
+ "duration": 1.6188418865203857,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_restart": {
+ "duration": 2.9773941040039062,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_startup_config": {
+ "duration": 7.739567756652832,
+ "status": "PASSED"
+ },
+ "opkg.OpkgRepoTest.test_opkg_install_from_repo": {
+ "duration": 0.0002453327178955078,
+ "log": "Test requires opkg to be installed",
+ "status": "SKIPPED"
+ },
+ "pam.PamBasicTest.test_pam": {
+ "duration": 0.00019311904907226562,
+ "log": "Test requires pam to be in DISTRO_FEATURES",
+ "status": "SKIPPED"
+ },
+ "parselogs.ParseLogsTest.test_parselogs": {
+ "duration": 8.427493810653687,
+ "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 375, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 17 != 0 : Log: /buildarea4/yzhao1/yocto/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 0.133876] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.092163] CPU0: Spectre v2: using BPIALL workaround\n[ 0.093158] Setting up static identity map for 0x80100000 - 0x80100060\n[ 0.093329] rcu: Hierarchical SRCU implementation.\n[ 0.094685] devtmpfs: initialized\n[ 0.109158] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3\n[ 0.109841] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.109872] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.111376] pinctrl core: initialized pinctrl subsystem\n[ 0.112650] NET: Registered protocol family 16\n[ 0.115301] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.133876] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.135236] thermal_sys: Registered thermal governor 'step_wise'\n[ 0.135610] cpuidle: using governor ladder\n[ 0.135655] cpuidle: using governor menu\n[ 1.264013] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 1.265213] Serial: AMBA PL011 UART driver\n[ 1.460886] raid6: int32x8 gen() 170 MB/s\n[ 1.630671] raid6: int32x8 xor() 108 MB/s\n[ 1.800628] raid6: int32x4 gen() 198 MB/s\n[ 1.970557] raid6: int32x4 xor() 118 MB/s\n[ 2.140539] raid6: int32x2 gen() 365 MB/s\n\n***********************\nCentral error: [ 3.711245] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.532259] xor: measuring software checksum speed\n[ 3.540026] arm4regs : 1274 MB/sec\n[ 3.550723] 8regs : 939 MB/sec\n[ 3.558461] 32regs : 1273 MB/sec\n[ 3.558469] xor: using function: arm4regs (1274 MB/sec)\n[ 3.558492] Key type asymmetric registered\n[ 3.558501] Asymmetric key parser 'x509' registered\n[ 3.558592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.558607] io scheduler mq-deadline registered\n[ 3.558616] io scheduler kyber registered\n[ 3.711245] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.711282] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.939247] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.939286] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 3.999928] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.999966] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.011950] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.011982] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.076850] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.076896] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.099489] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n\n***********************\nCentral error: [ 3.939247] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.550723] 8regs : 939 MB/sec\n[ 3.558461] 32regs : 1273 MB/sec\n[ 3.558469] xor: using function: arm4regs (1274 MB/sec)\n[ 3.558492] Key type asymmetric registered\n[ 3.558501] Asymmetric key parser 'x509' registered\n[ 3.558592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.558607] io scheduler mq-deadline registered\n[ 3.558616] io scheduler kyber registered\n[ 3.711245] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.711282] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.939247] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.939286] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 3.999928] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.999966] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.011950] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.011982] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.076850] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.076896] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.099489] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.108524] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.111455] printk: console [ttyS0] disabled\n\n***********************\nCentral error: [ 3.999928] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.558469] xor: using function: arm4regs (1274 MB/sec)\n[ 3.558492] Key type asymmetric registered\n[ 3.558501] Asymmetric key parser 'x509' registered\n[ 3.558592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.558607] io scheduler mq-deadline registered\n[ 3.558616] io scheduler kyber registered\n[ 3.711245] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.711282] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.939247] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.939286] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 3.999928] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.999966] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.011950] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.011982] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.076850] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.076896] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.099489] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.108524] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.111455] printk: console [ttyS0] disabled\n[ 4.111575] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.666329] printk: console [ttyS0] enabled\n\n***********************\nCentral error: [ 4.011950] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.558501] Asymmetric key parser 'x509' registered\n[ 3.558592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.558607] io scheduler mq-deadline registered\n[ 3.558616] io scheduler kyber registered\n[ 3.711245] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.711282] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.939247] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.939286] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 3.999928] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.999966] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.011950] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.011982] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.076850] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.076896] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.099489] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.108524] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.111455] printk: console [ttyS0] disabled\n[ 4.111575] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.666329] printk: console [ttyS0] enabled\n[ 4.671954] omap_rng 48310000.rng: Random Number Generator ver. 20\n[ 4.680577] random: crng init done\n\n***********************\nCentral error: [ 5.050720] tps65217-pmic: Failed to locate of_node [id: -1]\n***********************\n[ 4.970887] oprofile: using arm/armv7\n[ 4.973828] ThumbEE CPU extension supported.\n[ 4.976886] omap_voltage_late_init: Voltage driver support not added\n[ 4.983101] Loading compiled-in X.509 certificates\n[ 4.986852] Key type ._fscrypt registered\n[ 4.989686] Key type .fscrypt registered\n[ 4.992559] Key type fscrypt-provisioning registered\n[ 4.998406] Btrfs loaded, crc32c=crc32c-generic\n[ 5.003509] Key type encrypted registered\n[ 5.022750] OMAP GPIO hardware version 0.1\n[ 5.050720] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.059620] mmc0: new high speed MMC card at address 0001\n[ 5.066821] mmcblk0: mmc0:0001 MMC02G 1.79 GiB \n[ 5.070898] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.075723] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB\n[ 5.082582] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n[ 5.087390] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.091727] mmcblk0rpmb: mmc0:0001 MMC02G partition 3 128 KiB, chardev (249:0)\n[ 5.098725] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.109609] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.127820] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n\n***********************\nCentral error: [ 5.070898] tps65217-bl: Failed to locate of_node [id: -1]\n***********************\n[ 4.983101] Loading compiled-in X.509 certificates\n[ 4.986852] Key type ._fscrypt registered\n[ 4.989686] Key type .fscrypt registered\n[ 4.992559] Key type fscrypt-provisioning registered\n[ 4.998406] Btrfs loaded, crc32c=crc32c-generic\n[ 5.003509] Key type encrypted registered\n[ 5.022750] OMAP GPIO hardware version 0.1\n[ 5.050720] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.059620] mmc0: new high speed MMC card at address 0001\n[ 5.066821] mmcblk0: mmc0:0001 MMC02G 1.79 GiB \n[ 5.070898] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.075723] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB\n[ 5.082582] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n[ 5.087390] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.091727] mmcblk0rpmb: mmc0:0001 MMC02G partition 3 128 KiB, chardev (249:0)\n[ 5.098725] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.109609] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.127820] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 5.136027] sdhci-omap 48060000.mmc: Got CD GPIO\n[ 5.139686] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator\n[ 5.223394] mmc1: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA\n\n***********************\nCentral error: [ 683.370348] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:tilcdc crtc] flip_done timed out\n***********************\n[ 20.570937] cpsw 4a100000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off\n[ 20.610183] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready\n[ 20.666758] 8021q: 802.1Q VLAN Support v1.8\n[ 20.669730] 8021q: adding VLAN 0 to HW filter on device eth0\n[ 55.920173] usb 1-1.4: new low-speed USB device number 5 using musb-hdrc\n[ 56.089838] input: Dell Dell USB Entry Keyboard as /devices/platform/ocp/47400000.target-module/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:2107.0001/input/input0\n[ 56.240691] hid-generic 0003:413C:2107.0001: input: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-musb-hdrc.1-1.4/input0\n[ 68.460192] usb 1-1.7: new low-speed USB device number 6 using musb-hdrc\n[ 68.612520] input: USB Optical Mouse as /devices/platform/ocp/47400000.target-module/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.7/1-1.7:1.0/0003:0461:4D81.0002/input/input1\n[ 68.691050] hid-generic 0003:0461:4D81.0002: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-musb-hdrc.1-1.7/input0\n[ 683.370348] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:tilcdc crtc] flip_done timed out\n[ 693.610368] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:HDMI-A-1] flip_done timed out\n[ 783.850362] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] flip_done timed out\n[ 783.858637] tilcdc 4830e000.lcdc: already pending page flip!\n[ 1463.280846] hellomod: loading out-of-tree module taints kernel.\n[ 1463.286151] Hello world!\n[ 1464.179828] Cleaning up hellomod.\n\n***********************\nCentral error: [ 693.610368] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:HDMI-A-1] flip_done timed out\n***********************\n[ 20.610183] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready\n[ 20.666758] 8021q: 802.1Q VLAN Support v1.8\n[ 20.669730] 8021q: adding VLAN 0 to HW filter on device eth0\n[ 55.920173] usb 1-1.4: new low-speed USB device number 5 using musb-hdrc\n[ 56.089838] input: Dell Dell USB Entry Keyboard as /devices/platform/ocp/47400000.target-module/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:2107.0001/input/input0\n[ 56.240691] hid-generic 0003:413C:2107.0001: input: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-musb-hdrc.1-1.4/input0\n[ 68.460192] usb 1-1.7: new low-speed USB device number 6 using musb-hdrc\n[ 68.612520] input: USB Optical Mouse as /devices/platform/ocp/47400000.target-module/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.7/1-1.7:1.0/0003:0461:4D81.0002/input/input1\n[ 68.691050] hid-generic 0003:0461:4D81.0002: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-musb-hdrc.1-1.7/input0\n[ 683.370348] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:tilcdc crtc] flip_done timed out\n[ 693.610368] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:HDMI-A-1] flip_done timed out\n[ 783.850362] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] flip_done timed out\n[ 783.858637] tilcdc 4830e000.lcdc: already pending page flip!\n[ 1463.280846] hellomod: loading out-of-tree module taints kernel.\n[ 1463.286151] Hello world!\n[ 1464.179828] Cleaning up hellomod.\n\n***********************\nCentral error: [ 783.850362] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] flip_done timed out\n***********************\n[ 20.666758] 8021q: 802.1Q VLAN Support v1.8\n[ 20.669730] 8021q: adding VLAN 0 to HW filter on device eth0\n[ 55.920173] usb 1-1.4: new low-speed USB device number 5 using musb-hdrc\n[ 56.089838] input: Dell Dell USB Entry Keyboard as /devices/platform/ocp/47400000.target-module/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:2107.0001/input/input0\n[ 56.240691] hid-generic 0003:413C:2107.0001: input: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-musb-hdrc.1-1.4/input0\n[ 68.460192] usb 1-1.7: new low-speed USB device number 6 using musb-hdrc\n[ 68.612520] input: USB Optical Mouse as /devices/platform/ocp/47400000.target-module/47401c00.usb/musb-hdrc.1/usb1/1-1/1-1.7/1-1.7:1.0/0003:0461:4D81.0002/input/input1\n[ 68.691050] hid-generic 0003:0461:4D81.0002: input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-musb-hdrc.1-1.7/input0\n[ 683.370348] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:tilcdc crtc] flip_done timed out\n[ 693.610368] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:HDMI-A-1] flip_done timed out\n[ 783.850362] [drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] flip_done timed out\n[ 783.858637] tilcdc 4830e000.lcdc: already pending page flip!\n[ 1463.280846] hellomod: loading out-of-tree module taints kernel.\n[ 1463.286151] Hello world!\n[ 1464.179828] Cleaning up hellomod.\n\n***********************\nLog: /buildarea4/yzhao1/yocto/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg\n-----------------------\nCentral error: [ 0.133876] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.092163] CPU0: Spectre v2: using BPIALL workaround\n[ 0.093158] Setting up static identity map for 0x80100000 - 0x80100060\n[ 0.093329] rcu: Hierarchical SRCU implementation.\n[ 0.094685] devtmpfs: initialized\n[ 0.109158] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3\n[ 0.109841] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.109872] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.111376] pinctrl core: initialized pinctrl subsystem\n[ 0.112650] NET: Registered protocol family 16\n[ 0.115301] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.133876] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.135236] thermal_sys: Registered thermal governor 'step_wise'\n[ 0.135610] cpuidle: using governor ladder\n[ 0.135655] cpuidle: using governor menu\n[ 1.264013] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 1.265213] Serial: AMBA PL011 UART driver\n[ 1.460886] raid6: int32x8 gen() 170 MB/s\n[ 1.630671] raid6: int32x8 xor() 108 MB/s\n[ 1.800628] raid6: int32x4 gen() 198 MB/s\n[ 1.970557] raid6: int32x4 xor() 118 MB/s\n[ 2.140539] raid6: int32x2 gen() 365 MB/s\n\n***********************\nCentral error: [ 3.711245] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.532259] xor: measuring software checksum speed\n[ 3.540026] arm4regs : 1274 MB/sec\n[ 3.550723] 8regs : 939 MB/sec\n[ 3.558461] 32regs : 1273 MB/sec\n[ 3.558469] xor: using function: arm4regs (1274 MB/sec)\n[ 3.558492] Key type asymmetric registered\n[ 3.558501] Asymmetric key parser 'x509' registered\n[ 3.558592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.558607] io scheduler mq-deadline registered\n[ 3.558616] io scheduler kyber registered\n[ 3.711245] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.711282] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.939247] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.939286] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 3.999928] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.999966] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.011950] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.011982] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.076850] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.076896] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.099489] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n\n***********************\nCentral error: [ 3.939247] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.550723] 8regs : 939 MB/sec\n[ 3.558461] 32regs : 1273 MB/sec\n[ 3.558469] xor: using function: arm4regs (1274 MB/sec)\n[ 3.558492] Key type asymmetric registered\n[ 3.558501] Asymmetric key parser 'x509' registered\n[ 3.558592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.558607] io scheduler mq-deadline registered\n[ 3.558616] io scheduler kyber registered\n[ 3.711245] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.711282] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.939247] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.939286] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 3.999928] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.999966] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.011950] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.011982] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.076850] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.076896] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.099489] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.108524] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.111455] printk: console [ttyS0] disabled\n\n***********************\nCentral error: [ 3.999928] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.558469] xor: using function: arm4regs (1274 MB/sec)\n[ 3.558492] Key type asymmetric registered\n[ 3.558501] Asymmetric key parser 'x509' registered\n[ 3.558592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.558607] io scheduler mq-deadline registered\n[ 3.558616] io scheduler kyber registered\n[ 3.711245] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.711282] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.939247] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.939286] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 3.999928] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.999966] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.011950] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.011982] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.076850] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.076896] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.099489] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.108524] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.111455] printk: console [ttyS0] disabled\n[ 4.111575] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.666329] printk: console [ttyS0] enabled\n\n***********************\nCentral error: [ 4.011950] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n***********************\n[ 3.558501] Asymmetric key parser 'x509' registered\n[ 3.558592] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)\n[ 3.558607] io scheduler mq-deadline registered\n[ 3.558616] io scheduler kyber registered\n[ 3.711245] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.711282] omap_gpio 44e07000.gpio: Could not register gpio chip -517\n[ 3.939247] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.939286] omap_gpio 4804c000.gpio: Could not register gpio chip -517\n[ 3.999928] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 3.999966] omap_gpio 481ac000.gpio: Could not register gpio chip -517\n[ 4.011950] gpiochip_add_data_with_key: GPIOs 0..31 (gpio-0-31) failed to register, -517\n[ 4.011982] omap_gpio 481ae000.gpio: Could not register gpio chip -517\n[ 4.076850] debugfs: Directory '49000000.dma' with parent 'dmaengine' already present!\n[ 4.076896] edma 49000000.dma: TI EDMA DMA engine driver\n[ 4.099489] pinctrl-single 44e10800.pinmux: 142 pins, size 568\n[ 4.108524] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled\n[ 4.111455] printk: console [ttyS0] disabled\n[ 4.111575] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 20, base_baud = 3000000) is a 8250\n[ 4.666329] printk: console [ttyS0] enabled\n[ 4.671954] omap_rng 48310000.rng: Random Number Generator ver. 20\n[ 4.680577] random: crng init done\n\n***********************\nCentral error: [ 5.050720] tps65217-pmic: Failed to locate of_node [id: -1]\n***********************\n[ 4.970887] oprofile: using arm/armv7\n[ 4.973828] ThumbEE CPU extension supported.\n[ 4.976886] omap_voltage_late_init: Voltage driver support not added\n[ 4.983101] Loading compiled-in X.509 certificates\n[ 4.986852] Key type ._fscrypt registered\n[ 4.989686] Key type .fscrypt registered\n[ 4.992559] Key type fscrypt-provisioning registered\n[ 4.998406] Btrfs loaded, crc32c=crc32c-generic\n[ 5.003509] Key type encrypted registered\n[ 5.022750] OMAP GPIO hardware version 0.1\n[ 5.050720] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.059620] mmc0: new high speed MMC card at address 0001\n[ 5.066821] mmcblk0: mmc0:0001 MMC02G 1.79 GiB \n[ 5.070898] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.075723] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB\n[ 5.082582] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n[ 5.087390] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.091727] mmcblk0rpmb: mmc0:0001 MMC02G partition 3 128 KiB, chardev (249:0)\n[ 5.098725] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.109609] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.127820] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n\n***********************\nCentral error: [ 5.070898] tps65217-bl: Failed to locate of_node [id: -1]\n***********************\n[ 4.983101] Loading compiled-in X.509 certificates\n[ 4.986852] Key type ._fscrypt registered\n[ 4.989686] Key type .fscrypt registered\n[ 4.992559] Key type fscrypt-provisioning registered\n[ 4.998406] Btrfs loaded, crc32c=crc32c-generic\n[ 5.003509] Key type encrypted registered\n[ 5.022750] OMAP GPIO hardware version 0.1\n[ 5.050720] tps65217-pmic: Failed to locate of_node [id: -1]\n[ 5.059620] mmc0: new high speed MMC card at address 0001\n[ 5.066821] mmcblk0: mmc0:0001 MMC02G 1.79 GiB \n[ 5.070898] tps65217-bl: Failed to locate of_node [id: -1]\n[ 5.075723] mmcblk0boot0: mmc0:0001 MMC02G partition 1 1.00 MiB\n[ 5.082582] mmcblk0boot1: mmc0:0001 MMC02G partition 2 1.00 MiB\n[ 5.087390] tps65217 0-0024: TPS65217 ID 0xe version 1.2\n[ 5.091727] mmcblk0rpmb: mmc0:0001 MMC02G partition 3 128 KiB, chardev (249:0)\n[ 5.098725] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz\n[ 5.109609] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz\n[ 5.127820] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 5.136027] sdhci-omap 48060000.mmc: Got CD GPIO\n[ 5.139686] sdhci-omap 48060000.mmc: supply vqmmc not found, using dummy regulator\n[ 5.223394] mmc1: SDHCI controller on 48060000.mmc [48060000.mmc] using External DMA\n\n***********************\n17 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n",
+ "status": "FAILED"
+ },
+ "perl.PerlTest.test_perl_works": {
+ "duration": 0.25257062911987305,
+ "status": "PASSED"
+ },
+ "ping.PingTest.test_ping": {
+ "duration": 0.5532796382904053,
+ "status": "PASSED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectfail": {
+ "duration": 0.0003116130828857422,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectsuccess": {
+ "duration": 0.00017547607421875,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "python.PythonTest.test_python3": {
+ "duration": 0.4922473430633545,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_help": {
+ "duration": 0.31653857231140137,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query": {
+ "duration": 0.8146796226501465,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query_nonroot": {
+ "duration": 5.523969650268555,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": {
+ "duration": 32.09330344200134,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_install": {
+ "duration": 2.663456678390503,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_remove": {
+ "duration": 1.1202824115753174,
+ "status": "PASSED"
+ },
+ "scp.ScpTest.test_scp_file": {
+ "duration": 1.6784563064575195,
+ "status": "PASSED"
+ },
+ "ssh.SSHTest.test_ssh": {
+ "duration": 0.7420213222503662,
+ "status": "PASSED"
+ },
+ "stap.StapTest.test_stap": {
+ "duration": 277.95084857940674,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_basic": {
+ "duration": 0.00036644935607910156,
+ "log": "systemd is not the init manager for this image",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_failed": {
+ "duration": 0.00032782554626464844,
+ "log": "Test case systemd.SystemdBasicTests.test_systemd_failed depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_list": {
+ "duration": 0.00032329559326171875,
+ "log": "Test case systemd.SystemdBasicTests.test_systemd_list depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_boot_time": {
+ "duration": 0.0002677440643310547,
+ "log": "Test case systemd.SystemdJournalTests.test_systemd_boot_time depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_journal": {
+ "duration": 0.00024580955505371094,
+ "log": "Test case systemd.SystemdJournalTests.test_systemd_journal depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable": {
+ "duration": 0.0003654956817626953,
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_disable_enable depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable_ro": {
+ "duration": 0.0002834796905517578,
+ "log": "Test is only meant to run with read-only-rootfs in IMAGE_FEATURES",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_status": {
+ "duration": 0.00026535987854003906,
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_status depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_stop_start": {
+ "duration": 0.0002510547637939453,
+ "log": "Test case systemd.SystemdServiceTests.test_systemd_stop_start depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_wayland_info": {
+ "duration": 0.0003552436828613281,
+ "log": "Test requires wayland-utils to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_can_initialize_new_wayland_compositor": {
+ "duration": 0.00030112266540527344,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_running": {
+ "duration": 0.0003006458282470703,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "xorg.XorgTest.test_xorg_running": {
+ "duration": 0.7331857681274414,
+ "status": "PASSED"
+ }
+ }
+ },
+ "runtime_core-image-sato-sdk_beaglebone-yocto_20210126025444": {
+ "configuration": {
+ "DISTRO": "poky-altcfg",
+ "HOST_DISTRO": "ubuntu-18.04",
+ "IMAGE_BASENAME": "core-image-sato-sdk",
+ "IMAGE_PKGTYPE": "rpm",
+ "LAYERS": {
+ "meta": {
+ "branch": "master",
+ "commit": "b5e634644b69a968a93aad0dd0502cf479d3973a",
+ "commit_count": 60735
+ },
+ "meta-poky": {
+ "branch": "master",
+ "commit": "b5e634644b69a968a93aad0dd0502cf479d3973a",
+ "commit_count": 60735
+ },
+ "meta-yocto-bsp": {
+ "branch": "master",
+ "commit": "b5e634644b69a968a93aad0dd0502cf479d3973a",
+ "commit_count": 60735
+ }
+ },
+ "MACHINE": "beaglebone-yocto",
+ "STARTTIME": "20210126025444",
+ "TEST_TYPE": "runtime"
+ },
+ "result": {
+ "apt.AptRepoTest.test_apt_install_from_repo": {
+ "duration": 0.0004086494445800781,
+ "log": "Test requires apt to be installed",
+ "status": "SKIPPED"
+ },
+ "buildcpio.BuildCpioTest.test_cpio": {
+ "duration": 488.04291915893555,
+ "status": "PASSED"
+ },
+ "buildgalculator.GalculatorTest.test_galculator": {
+ "duration": 0.0009300708770751953,
+ "log": "Test requires gtk+3 to be installed",
+ "status": "SKIPPED"
+ },
+ "buildlzip.BuildLzipTest.test_lzip": {
+ "duration": 104.31261873245239,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_help": {
+ "duration": 0.5237009525299072,
+ "status": "PASSED"
+ },
+ "connman.ConnmanTest.test_connmand_running": {
+ "duration": 0.5335843563079834,
+ "status": "PASSED"
+ },
+ "date.DateTest.test_date": {
+ "duration": 8.371065378189087,
+ "status": "PASSED"
+ },
+ "df.DfTest.test_df": {
+ "duration": 0.58642578125,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_help": {
+ "duration": 9.317462921142578,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_history": {
+ "duration": 7.03661036491394,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_info": {
+ "duration": 4.56093692779541,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_search": {
+ "duration": 4.515692949295044,
+ "status": "PASSED"
+ },
+ "dnf.DnfBasicTest.test_dnf_version": {
+ "duration": 4.39441442489624,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_exclude": {
+ "duration": 93.11801505088806,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install": {
+ "duration": 17.84703516960144,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_dependency": {
+ "duration": 27.849122524261475,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_disk": {
+ "duration": 33.03170442581177,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_install_from_http": {
+ "duration": 27.810672521591187,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot": {
+ "duration": 55.713908433914185,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": {
+ "duration": 0.0003571510314941406,
+ "log": "Test run when enable usrmege",
+ "status": "SKIPPED"
+ },
+ "dnf.DnfRepoTest.test_dnf_makecache": {
+ "duration": 4.058728933334351,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_reinstall": {
+ "duration": 6.2428295612335205,
+ "status": "PASSED"
+ },
+ "dnf.DnfRepoTest.test_dnf_repoinfo": {
+ "duration": 4.6493330001831055,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gcc_compile": {
+ "duration": 3.6834118366241455,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp2_compile": {
+ "duration": 4.063420534133911,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_gpp_compile": {
+ "duration": 4.599162578582764,
+ "status": "PASSED"
+ },
+ "gcc.GccCompileTest.test_make": {
+ "duration": 3.2174696922302246,
+ "status": "PASSED"
+ },
+ "gi.GObjectIntrospectionTest.test_python": {
+ "duration": 1.9847326278686523,
+ "status": "PASSED"
+ },
+ "kernelmodule.KernelModuleTest.test_kernel_module": {
+ "duration": 132.15036058425903,
+ "status": "PASSED"
+ },
+ "ldd.LddTest.test_ldd": {
+ "duration": 1.5093412399291992,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_newlog": {
+ "duration": 2.933305025100708,
+ "status": "PASSED"
+ },
+ "logrotate.LogrotateTest.test_logrotate_wtmp": {
+ "duration": 2.4650044441223145,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTest.test_syslog_running": {
+ "duration": 0.5349602699279785,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_logger": {
+ "duration": 1.912198543548584,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_restart": {
+ "duration": 1.0873234272003174,
+ "status": "PASSED"
+ },
+ "oe_syslog.SyslogTestConfig.test_syslog_startup_config": {
+ "duration": 0.0005497932434082031,
+ "log": "Not appropiate for systemd image",
+ "status": "SKIPPED"
+ },
+ "opkg.OpkgRepoTest.test_opkg_install_from_repo": {
+ "duration": 0.0005142688751220703,
+ "log": "Test requires opkg to be installed",
+ "status": "SKIPPED"
+ },
+ "pam.PamBasicTest.test_pam": {
+ "duration": 1.9604852199554443,
+ "status": "PASSED"
+ },
+ "parselogs.ParseLogsTest.test_parselogs": {
+ "duration": 8.80606484413147,
+ "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 375, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 2 != 0 : Log: /buildarea4/yzhao1/yocto/build-beaglebone-alt/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 0.438257] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.107599] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.107623] futex hash table entries: 256 (order: -1, 3072 bytes, linear)\n[ 0.109132] xor: measuring software checksum speed\n[ 0.209059] arm4regs : 1221.600 MB/sec\n[ 0.309003] 8regs : 904.800 MB/sec\n[ 0.409003] 32regs : 1220.800 MB/sec\n[ 0.409011] xor: using function: arm4regs (1221.600 MB/sec)\n[ 0.409026] pinctrl core: initialized pinctrl subsystem\n[ 0.410253] NET: Registered protocol family 16\n[ 0.412763] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.438257] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.440578] cpuidle: using governor ladder\n[ 0.440617] cpuidle: using governor menu\n[ 0.457974] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.459335] Serial: AMBA PL011 UART driver\n[ 0.639296] raid6: int32x8 gen() 152 MB/s\n[ 0.809497] raid6: int32x8 xor() 102 MB/s\n[ 0.979316] raid6: int32x4 gen() 160 MB/s\n[ 1.149172] raid6: int32x4 xor() 116 MB/s\n[ 1.319065] raid6: int32x2 gen() 286 MB/s\n[ 1.489116] raid6: int32x2 xor() 186 MB/s\n\n***********************\nCentral error: [ 3.334031] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.189097] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.194550] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.198848] usbcore: registered new interface driver usb-storage\n[ 3.206539] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.225976] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.254920] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.259555] i2c /dev entries driver\n[ 3.262981] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.270772] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.278354] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.334031] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.344824] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.352663] usbcore: registered new interface driver usbhid\n[ 3.357179] usbhid: USB HID core driver\n[ 3.359887] mmc0: new high speed SDHC card at address 1234\n[ 3.365344] oprofile: using arm/armv7\n[ 3.368648] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.372003] u32 classifier\n[ 3.373412] input device check on\n[ 3.377318] Actions configured\n[ 3.380396] NET: Registered protocol family 10\n\n***********************\n2 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n",
+ "status": "FAILED"
+ },
+ "perl.PerlTest.test_perl_works": {
+ "duration": 0.485598087310791,
+ "status": "PASSED"
+ },
+ "ping.PingTest.test_ping": {
+ "duration": 0.04465198516845703,
+ "status": "PASSED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectfail": {
+ "duration": 0.000579833984375,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "ptest.PtestRunnerTest.test_ptestrunner_expectsuccess": {
+ "duration": 0.00041413307189941406,
+ "log": "Test requires ptest-runner to be installed",
+ "status": "SKIPPED"
+ },
+ "python.PythonTest.test_python3": {
+ "duration": 0.6955342292785645,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_help": {
+ "duration": 0.513477087020874,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query": {
+ "duration": 1.003361701965332,
+ "status": "PASSED"
+ },
+ "rpm.RpmBasicTest.test_rpm_query_nonroot": {
+ "duration": 6.747321367263794,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": {
+ "duration": 35.72362995147705,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_install": {
+ "duration": 2.848329782485962,
+ "status": "PASSED"
+ },
+ "rpm.RpmInstallRemoveTest.test_rpm_remove": {
+ "duration": 1.3456568717956543,
+ "status": "PASSED"
+ },
+ "scp.ScpTest.test_scp_file": {
+ "duration": 2.0795705318450928,
+ "status": "PASSED"
+ },
+ "ssh.SSHTest.test_ssh": {
+ "duration": 0.9483098983764648,
+ "status": "PASSED"
+ },
+ "stap.StapTest.test_stap": {
+ "duration": 245.99702095985413,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_basic": {
+ "duration": 0.4938523769378662,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_failed": {
+ "duration": 1.0378222465515137,
+ "status": "PASSED"
+ },
+ "systemd.SystemdBasicTests.test_systemd_list": {
+ "duration": 3.8765506744384766,
+ "status": "PASSED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_boot_time": {
+ "duration": 0.6072819232940674,
+ "status": "PASSED"
+ },
+ "systemd.SystemdJournalTests.test_systemd_journal": {
+ "duration": 0.8093218803405762,
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable": {
+ "duration": 6.879421234130859,
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_disable_enable_ro": {
+ "duration": 0.0008842945098876953,
+ "log": "Test is only meant to run with read-only-rootfs in IMAGE_FEATURES",
+ "status": "SKIPPED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_status": {
+ "duration": 0.5515191555023193,
+ "status": "PASSED"
+ },
+ "systemd.SystemdServiceTests.test_systemd_stop_start": {
+ "duration": 2.2763960361480713,
+ "status": "PASSED"
+ },
+ "weston.WestonTest.test_wayland_info": {
+ "duration": 0.0008935928344726562,
+ "log": "Test requires wayland-utils to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_can_initialize_new_wayland_compositor": {
+ "duration": 0.0004229545593261719,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "weston.WestonTest.test_weston_running": {
+ "duration": 0.00039386749267578125,
+ "log": "Test requires weston to be installed",
+ "status": "SKIPPED"
+ },
+ "xorg.XorgTest.test_xorg_running": {
+ "duration": 1.1176624298095703,
+ "status": "PASSED"
+ }
+ }
+ }
+}
\ No newline at end of file |