diff options
Diffstat (limited to '3.0_RC2/3.0_RC2_test_results/beaglebone/testresults.json')
| -rw-r--r-- | 3.0_RC2/3.0_RC2_test_results/beaglebone/testresults.json | 653 |
1 files changed, 653 insertions, 0 deletions
diff --git a/3.0_RC2/3.0_RC2_test_results/beaglebone/testresults.json b/3.0_RC2/3.0_RC2_test_results/beaglebone/testresults.json new file mode 100644 index 0000000000..154a86b548 --- /dev/null +++ b/3.0_RC2/3.0_RC2_test_results/beaglebone/testresults.json @@ -0,0 +1,653 @@ +{ + "manual_bsp-hw_20191012163729": { + "configuration": { + "IMAGE_BASENAME": "core-image-sato-sdk", + "LAYERS": { + "meta": { + "branch": "zeus", + "commit": "94f6b31befda5c496f65e863a6f8152b42d7ebf0", + "commit_count": 55910 + }, + "meta-poky": { + "branch": "zeus", + "commit": "94f6b31befda5c496f65e863a6f8152b42d7ebf0", + "commit_count": 55910 + }, + "meta-yocto-bsp": { + "branch": "zeus", + "commit": "94f6b31befda5c496f65e863a6f8152b42d7ebf0", + "commit_count": 55910 + } + }, + "MACHINE": "beaglebone-yocto", + "STARTTIME": "20191012163729", + "TEST_MODULE": "bsp-hw", + "TEST_TYPE": "manual" + }, + "result": { + "bsps-hw.bsps-hw.Add_multiple_files_in_media_player": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.Boot_from_JFFS2_image": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.Check_if_RTC_(Real_Time_Clock)_can_work_correctly": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.Check_if_SATA_disk_can_work_correctly": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.Check_if_target_can_support_EEPROM": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.Check_if_watchdog_can_reset_the_target_system": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.Graphics_-_ABAT": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.Graphics_-_x11perf_-_2D": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_HDD-drive": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_SD-drive": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.MicroSD_-__mount": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.MicroSD_-__read_files": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.MicroSD_-__umount": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.MicroSD_-__write_files": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.System_can_boot_up_via_NFS": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.Test_Seek_bar_and_volume_control": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.Test_boot_on_serial_communication_HDD": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.Test_boot_on_serial_communication_SD": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.Test_boot_on_serial_communication_USB": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.Test_if_LAN_device_works_well_after_resume_from_suspend_state": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.Test_if_usb_hid_device_works_well_after_resume_from_suspend_state": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.USB_-_mount": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.USB_-_read_files": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.USB_-_umount": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.USB_-_write_files": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.X_server_can_start_up_with_runlevel_5_boot": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.audio_-_play_(ogg)_with_HDMI": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.audio_-_play_(wav)_with_HDMI": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.boot_and_install_from_USB": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.boot_from_runlevel_3": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.boot_from_runlevel_5": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.check_CPU_utilization_after_standby": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.check_bash_in_image": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.click_terminal_icon_on_X_desktop": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.connman_offline_mode_in_connman-gnome": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.ethernet_get_IP_in_connman_via_DHCP": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.ethernet_static_ip_set_in_connman": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.live_boot_from_USB": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.media_player_-_play_video_(ogv)": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.media_player_-_stop/play_button_(ogv)": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.reboot_system": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.rpm_-__install_dependency_package": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.shutdown_system": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.standby": { + "status": "SKIPPED" + }, + "bsps-hw.bsps-hw.switch_among_multi_applications_and_desktop": { + "status": "PASSED" + }, + "bsps-hw.bsps-hw.video_-_libva_check_(ogg_video_play)": { + "status": "SKIPPED" + } + } + }, + "manual_compliance-test_20191014092250": { + "configuration": { + "IMAGE_BASENAME": "core-image-sato-sdk", + "LAYERS": { + "meta": { + "branch": "zeus", + "commit": "94f6b31befda5c496f65e863a6f8152b42d7ebf0", + "commit_count": 55910 + }, + "meta-poky": { + "branch": "zeus", + "commit": "94f6b31befda5c496f65e863a6f8152b42d7ebf0", + "commit_count": 55910 + }, + "meta-yocto-bsp": { + "branch": "zeus", + "commit": "94f6b31befda5c496f65e863a6f8152b42d7ebf0", + "commit_count": 55910 + } + }, + "MACHINE": "beaglebone-yocto", + "STARTTIME": "20191014092250", + "TEST_MODULE": "compliance-test", + "TEST_TYPE": "manual" + }, + "result": { + "compliance-test.compliance-test.stress_test_-_- crashme_-_-Beaglebone": { + "status": "PASSED" + }, + "compliance-test.compliance-test.stress_test_-_Genericx86-64": { + "status": "SKIPPED" + }, + "compliance-test.compliance-test.stress_test_-_ltp_-Beaglebone": { + "status": "PASSED" + } + } + }, + "runtime_core-image-sato-sdk_beaglebone-yocto_20191010083712": { + "configuration": { + "DISTRO": "poky", + "HOST_DISTRO": "ubuntu-16.04", + "IMAGE_BASENAME": "core-image-sato-sdk", + "IMAGE_PKGTYPE": "rpm", + "LAYERS": { + "meta": { + "branch": "zeus", + "commit": "94f6b31befda5c496f65e863a6f8152b42d7ebf0", + "commit_count": 55910 + }, + "meta-poky": { + "branch": "zeus", + "commit": "94f6b31befda5c496f65e863a6f8152b42d7ebf0", + "commit_count": 55910 + }, + "meta-yocto-bsp": { + "branch": "zeus", + "commit": "94f6b31befda5c496f65e863a6f8152b42d7ebf0", + "commit_count": 55910 + } + }, + "MACHINE": "beaglebone-yocto", + "STARTTIME": "20191010083712", + "TEST_TYPE": "runtime" + }, + "result": { + "apt.AptRepoTest.test_apt_install_from_repo": { + "log": "Test requires apt to be installed", + "status": "SKIPPED" + }, + "buildcpio.BuildCpioTest.test_cpio": { + "status": "PASSED" + }, + "buildgalculator.GalculatorTest.test_galculator": { + "log": "Test requires gtk+3 to be installed", + "status": "SKIPPED" + }, + "buildlzip.BuildLzipTest.test_lzip": { + "status": "PASSED" + }, + "connman.ConnmanTest.test_connmand_help": { + "status": "PASSED" + }, + "connman.ConnmanTest.test_connmand_running": { + "status": "PASSED" + }, + "date.DateTest.test_date": { + "status": "PASSED" + }, + "df.DfTest.test_df": { + "status": "PASSED" + }, + "dnf.DnfBasicTest.test_dnf_help": { + "status": "PASSED" + }, + "dnf.DnfBasicTest.test_dnf_history": { + "status": "PASSED" + }, + "dnf.DnfBasicTest.test_dnf_info": { + "status": "PASSED" + }, + "dnf.DnfBasicTest.test_dnf_search": { + "status": "PASSED" + }, + "dnf.DnfBasicTest.test_dnf_version": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_exclude": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_install": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_install_dependency": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_install_from_disk": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_install_from_http": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_installroot": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": { + "log": "Test run when enable usrmege", + "status": "SKIPPED" + }, + "dnf.DnfRepoTest.test_dnf_makecache": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_reinstall": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_repoinfo": { + "status": "PASSED" + }, + "gcc.GccCompileTest.test_gcc_compile": { + "status": "PASSED" + }, + "gcc.GccCompileTest.test_gpp2_compile": { + "status": "PASSED" + }, + "gcc.GccCompileTest.test_gpp_compile": { + "status": "PASSED" + }, + "gcc.GccCompileTest.test_make": { + "status": "PASSED" + }, + "gi.GObjectIntrospectionTest.test_python": { + "status": "PASSED" + }, + "kernelmodule.KernelModuleTest.test_kernel_module": { + "status": "PASSED" + }, + "ldd.LddTest.test_ldd": { + "status": "PASSED" + }, + "logrotate.LogrotateTest.test_1_logrotate_setup": { + "status": "PASSED" + }, + "logrotate.LogrotateTest.test_2_logrotate": { + "status": "PASSED" + }, + "oe_syslog.SyslogTest.test_syslog_running": { + "status": "PASSED" + }, + "oe_syslog.SyslogTestConfig.test_syslog_logger": { + "status": "PASSED" + }, + "oe_syslog.SyslogTestConfig.test_syslog_restart": { + "status": "PASSED" + }, + "oe_syslog.SyslogTestConfig.test_syslog_startup_config": { + "status": "PASSED" + }, + "opkg.OpkgRepoTest.test_opkg_install_from_repo": { + "log": "Test requires opkg to be installed", + "status": "SKIPPED" + }, + "pam.PamBasicTest.test_pam": { + "log": "Test requires pam to be in DISTRO_FEATURES", + "status": "SKIPPED" + }, + "parselogs.ParseLogsTest.test_parselogs": { + "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 378, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 4 != 0 : Log: /buildarea4/yzhao1/yocto/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg\n-----------------------\nCentral error: [ 3.202050] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.058274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.063718] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.068011] usbcore: registered new interface driver usb-storage\n[ 3.075602] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.095113] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.123486] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.128139] i2c /dev entries driver\n[ 3.131531] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.139210] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.146795] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.202050] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.212275] usbcore: registered new interface driver usbhid\n[ 3.216730] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.223531] usbhid: USB HID core driver\n[ 3.227349] oprofile: using arm/armv7\n[ 3.229963] u32 classifier\n[ 3.231450] Actions configured\n[ 3.233750] mmc0: new high speed SDHC card at address 0007\n[ 3.239118] NET: Registered protocol family 10\n[ 3.243893] mmcblk0: mmc0:0007 SD16G 14.9 GiB \n[ 3.248916] Segment Routing with IPv6\n\n***********************\nCentral error: [ 0.423441] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.107338] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.107364] futex hash table entries: 256 (order: -1, 3072 bytes)\n[ 0.108760] xor: measuring software checksum speed\n[ 0.199126] arm4regs : 1221.600 MB/sec\n[ 0.299068] 8regs : 905.200 MB/sec\n[ 0.399066] 32regs : 1175.200 MB/sec\n[ 0.399073] xor: using function: arm4regs (1221.600 MB/sec)\n[ 0.399091] pinctrl core: initialized pinctrl subsystem\n[ 0.400273] NET: Registered protocol family 16\n[ 0.402650] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.423441] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.450753] cpuidle: using governor ladder\n[ 0.450789] cpuidle: using governor menu\n[ 0.467202] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.468244] Serial: AMBA PL011 UART driver\n[ 0.649438] raid6: int32x8 gen() 180 MB/s\n[ 0.819714] raid6: int32x8 xor() 122 MB/s\n[ 0.989214] raid6: int32x4 gen() 209 MB/s\n[ 1.159317] raid6: int32x4 xor() 152 MB/s\n[ 1.329288] raid6: int32x2 gen() 272 MB/s\n[ 1.499073] raid6: int32x2 xor() 191 MB/s\n\n***********************\nLog: /buildarea4/yzhao1/yocto/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 3.202050] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.058274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.063718] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.068011] usbcore: registered new interface driver usb-storage\n[ 3.075602] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.095113] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.123486] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.128139] i2c /dev entries driver\n[ 3.131531] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.139210] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.146795] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.202050] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.212275] usbcore: registered new interface driver usbhid\n[ 3.216730] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.223531] usbhid: USB HID core driver\n[ 3.227349] oprofile: using arm/armv7\n[ 3.229963] u32 classifier\n[ 3.231450] Actions configured\n[ 3.233750] mmc0: new high speed SDHC card at address 0007\n[ 3.239118] NET: Registered protocol family 10\n[ 3.243893] mmcblk0: mmc0:0007 SD16G 14.9 GiB \n[ 3.248916] Segment Routing with IPv6\n\n***********************\nCentral error: [ 0.423441] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.107338] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.107364] futex hash table entries: 256 (order: -1, 3072 bytes)\n[ 0.108760] xor: measuring software checksum speed\n[ 0.199126] arm4regs : 1221.600 MB/sec\n[ 0.299068] 8regs : 905.200 MB/sec\n[ 0.399066] 32regs : 1175.200 MB/sec\n[ 0.399073] xor: using function: arm4regs (1221.600 MB/sec)\n[ 0.399091] pinctrl core: initialized pinctrl subsystem\n[ 0.400273] NET: Registered protocol family 16\n[ 0.402650] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.423441] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.450753] cpuidle: using governor ladder\n[ 0.450789] cpuidle: using governor menu\n[ 0.467202] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.468244] Serial: AMBA PL011 UART driver\n[ 0.649438] raid6: int32x8 gen() 180 MB/s\n[ 0.819714] raid6: int32x8 xor() 122 MB/s\n[ 0.989214] raid6: int32x4 gen() 209 MB/s\n[ 1.159317] raid6: int32x4 xor() 152 MB/s\n[ 1.329288] raid6: int32x2 gen() 272 MB/s\n[ 1.499073] raid6: int32x2 xor() 191 MB/s\n\n***********************\n4 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n", + "status": "FAILED" + }, + "perl.PerlTest.test_perl_works": { + "status": "PASSED" + }, + "ping.PingTest.test_ping": { + "status": "PASSED" + }, + "ptest.PtestRunnerTest.test_ptestrunner": { + "log": "Test requires ptest-runner to be installed", + "status": "SKIPPED" + }, + "python.PythonTest.test_python3": { + "status": "PASSED" + }, + "rpm.RpmBasicTest.test_rpm_help": { + "status": "PASSED" + }, + "rpm.RpmBasicTest.test_rpm_query": { + "status": "PASSED" + }, + "rpm.RpmBasicTest.test_rpm_query_nonroot": { + "status": "PASSED" + }, + "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": { + "status": "PASSED" + }, + "rpm.RpmInstallRemoveTest.test_rpm_install": { + "status": "PASSED" + }, + "rpm.RpmInstallRemoveTest.test_rpm_remove": { + "status": "PASSED" + }, + "scp.ScpTest.test_scp_file": { + "status": "PASSED" + }, + "ssh.SSHTest.test_ssh": { + "status": "PASSED" + }, + "stap.StapTest.test_stap": { + "status": "PASSED" + }, + "systemd.SystemdBasicTests.test_systemd_basic": { + "log": "systemd is not the init manager for this image", + "status": "SKIPPED" + }, + "systemd.SystemdBasicTests.test_systemd_failed": { + "log": "Test case systemd.SystemdBasicTests.test_systemd_failed depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", + "status": "SKIPPED" + }, + "systemd.SystemdBasicTests.test_systemd_list": { + "log": "Test case systemd.SystemdBasicTests.test_systemd_list depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", + "status": "SKIPPED" + }, + "systemd.SystemdJournalTests.test_systemd_boot_time": { + "log": "Test case systemd.SystemdJournalTests.test_systemd_boot_time depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", + "status": "SKIPPED" + }, + "systemd.SystemdJournalTests.test_systemd_journal": { + "log": "Test case systemd.SystemdJournalTests.test_systemd_journal depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", + "status": "SKIPPED" + }, + "systemd.SystemdServiceTests.test_systemd_disable_enable": { + "log": "Test case systemd.SystemdServiceTests.test_systemd_disable_enable depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.", + "status": "SKIPPED" + }, + "systemd.SystemdServiceTests.test_systemd_status": { + "log": "Test case systemd.SystemdServiceTests.test_systemd_status depends on systemd.SystemdBasicTests.test_systemd_basic but it didn't pass/run.", + "status": "SKIPPED" + }, + "systemd.SystemdServiceTests.test_systemd_stop_start": { + "log": "Test case systemd.SystemdServiceTests.test_systemd_stop_start depends on systemd.SystemdServiceTests.test_systemd_status but it didn't pass/run.", + "status": "SKIPPED" + }, + "xorg.XorgTest.test_xorg_running": { + "status": "PASSED" + } + } + }, + "runtime_core-image-sato-sdk_beaglebone-yocto_20191014045006": { + "configuration": { + "DISTRO": "poky-altcfg", + "HOST_DISTRO": "ubuntu-16.04", + "IMAGE_BASENAME": "core-image-sato-sdk", + "IMAGE_PKGTYPE": "rpm", + "LAYERS": { + "meta": { + "branch": "zeus", + "commit": "94f6b31befda5c496f65e863a6f8152b42d7ebf0", + "commit_count": 55910 + }, + "meta-poky": { + "branch": "zeus", + "commit": "94f6b31befda5c496f65e863a6f8152b42d7ebf0", + "commit_count": 55910 + }, + "meta-yocto-bsp": { + "branch": "zeus", + "commit": "94f6b31befda5c496f65e863a6f8152b42d7ebf0", + "commit_count": 55910 + } + }, + "MACHINE": "beaglebone-yocto", + "STARTTIME": "20191014045006", + "TEST_TYPE": "runtime" + }, + "result": { + "apt.AptRepoTest.test_apt_install_from_repo": { + "log": "Test requires apt to be installed", + "status": "SKIPPED" + }, + "buildcpio.BuildCpioTest.test_cpio": { + "status": "PASSED" + }, + "buildgalculator.GalculatorTest.test_galculator": { + "log": "Test requires gtk+3 to be installed", + "status": "SKIPPED" + }, + "buildlzip.BuildLzipTest.test_lzip": { + "status": "PASSED" + }, + "connman.ConnmanTest.test_connmand_help": { + "status": "PASSED" + }, + "connman.ConnmanTest.test_connmand_running": { + "status": "PASSED" + }, + "date.DateTest.test_date": { + "status": "PASSED" + }, + "df.DfTest.test_df": { + "status": "PASSED" + }, + "dnf.DnfBasicTest.test_dnf_help": { + "status": "PASSED" + }, + "dnf.DnfBasicTest.test_dnf_history": { + "status": "PASSED" + }, + "dnf.DnfBasicTest.test_dnf_info": { + "status": "PASSED" + }, + "dnf.DnfBasicTest.test_dnf_search": { + "status": "PASSED" + }, + "dnf.DnfBasicTest.test_dnf_version": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_exclude": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_install": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_install_dependency": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_install_from_disk": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_install_from_http": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_installroot": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_installroot_usrmerge": { + "log": "Test run when enable usrmege", + "status": "SKIPPED" + }, + "dnf.DnfRepoTest.test_dnf_makecache": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_reinstall": { + "status": "PASSED" + }, + "dnf.DnfRepoTest.test_dnf_repoinfo": { + "status": "PASSED" + }, + "gcc.GccCompileTest.test_gcc_compile": { + "status": "PASSED" + }, + "gcc.GccCompileTest.test_gpp2_compile": { + "status": "PASSED" + }, + "gcc.GccCompileTest.test_gpp_compile": { + "status": "PASSED" + }, + "gcc.GccCompileTest.test_make": { + "status": "PASSED" + }, + "gi.GObjectIntrospectionTest.test_python": { + "status": "PASSED" + }, + "kernelmodule.KernelModuleTest.test_kernel_module": { + "status": "PASSED" + }, + "ldd.LddTest.test_ldd": { + "status": "PASSED" + }, + "logrotate.LogrotateTest.test_1_logrotate_setup": { + "status": "PASSED" + }, + "logrotate.LogrotateTest.test_2_logrotate": { + "status": "PASSED" + }, + "oe_syslog.SyslogTest.test_syslog_running": { + "status": "PASSED" + }, + "oe_syslog.SyslogTestConfig.test_syslog_logger": { + "status": "PASSED" + }, + "oe_syslog.SyslogTestConfig.test_syslog_restart": { + "status": "PASSED" + }, + "oe_syslog.SyslogTestConfig.test_syslog_startup_config": { + "log": "Not appropiate for systemd image", + "status": "SKIPPED" + }, + "opkg.OpkgRepoTest.test_opkg_install_from_repo": { + "log": "Test requires opkg to be installed", + "status": "SKIPPED" + }, + "pam.PamBasicTest.test_pam": { + "status": "PASSED" + }, + "parselogs.ParseLogsTest.test_parselogs": { + "log": "Traceback (most recent call last):\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/core/decorator/__init__.py\", line 36, in wrapped_f\n return func(*args, **kwargs)\n File \"/buildarea4/yzhao1/yocto/poky/meta/lib/oeqa/runtime/cases/parselogs.py\", line 378, in test_parselogs\n self.assertEqual(errcount, 0, msg=self.msg)\nAssertionError: 2 != 0 : Log: /buildarea4/yzhao1/yocto/build-beaglebone/tmp/work/beaglebone_yocto-poky-linux-gnueabi/core-image-sato-sdk/1.0-r0/target_logs/dmesg_output.log\n-----------------------\nCentral error: [ 3.201954] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n***********************\n[ 3.058255] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver\n[ 3.063701] ehci-omap: OMAP-EHCI Host Controller driver\n[ 3.067996] usbcore: registered new interface driver usb-storage\n[ 3.075593] am335x-phy-driver 47401300.usb-phy: 47401300.usb-phy supply vcc not found, using dummy regulator\n[ 3.095110] am335x-phy-driver 47401b00.usb-phy: 47401b00.usb-phy supply vcc not found, using dummy regulator\n[ 3.123448] omap_rtc 44e3e000.rtc: registered as rtc0\n[ 3.128108] i2c /dev entries driver\n[ 3.131485] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec\n[ 3.139147] omap_gpio 44e07000.gpio: Could not set line 6 debounce to 200000 microseconds (-22)\n[ 3.146723] omap_hsmmc 48060000.mmc: Got CD GPIO\n[ 3.201954] omap_hsmmc 47810000.mmc: RX DMA channel request failed\n[ 3.212042] usbcore: registered new interface driver usbhid\n[ 3.216514] mmc0: host does not support reading read-only switch, assuming write-enable\n[ 3.223318] usbhid: USB HID core driver\n[ 3.227120] oprofile: using arm/armv7\n[ 3.229732] u32 classifier\n[ 3.231216] Actions configured\n[ 3.233547] mmc0: new high speed SDHC card at address 1234\n[ 3.238674] NET: Registered protocol family 10\n[ 3.243661] mmcblk0: mmc0:1234 SA32G 28.9 GiB \n[ 3.248605] Segment Routing with IPv6\n\n***********************\nCentral error: [ 0.423569] l3-aon-clkctrl:0000:0: failed to disable\n***********************\n[ 0.107284] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns\n[ 0.107308] futex hash table entries: 256 (order: -1, 3072 bytes)\n[ 0.108676] xor: measuring software checksum speed\n[ 0.199126] arm4regs : 1221.600 MB/sec\n[ 0.299069] 8regs : 905.200 MB/sec\n[ 0.399067] 32regs : 1175.200 MB/sec\n[ 0.399075] xor: using function: arm4regs (1221.600 MB/sec)\n[ 0.399093] pinctrl core: initialized pinctrl subsystem\n[ 0.400272] NET: Registered protocol family 16\n[ 0.402669] DMA: preallocated 256 KiB pool for atomic coherent allocations\n[ 0.423569] l3-aon-clkctrl:0000:0: failed to disable\n[ 0.450907] cpuidle: using governor ladder\n[ 0.450942] cpuidle: using governor menu\n[ 0.467367] hw-breakpoint: debug architecture 0x4 unsupported.\n[ 0.468404] Serial: AMBA PL011 UART driver\n[ 0.649449] raid6: int32x8 gen() 180 MB/s\n[ 0.819710] raid6: int32x8 xor() 122 MB/s\n[ 0.989230] raid6: int32x4 gen() 209 MB/s\n[ 1.159322] raid6: int32x4 xor() 152 MB/s\n[ 1.329088] raid6: int32x2 gen() 272 MB/s\n[ 1.499090] raid6: int32x2 xor() 191 MB/s\n\n***********************\n2 errors found in logs.\n\nStdout:\nMachine information: \n*******************************\nMachine name: beaglebone-yocto\nCPU: ARMv7 Processor rev 2 (v7l)\nArch: armv7l\nPhysical cores: \nLogical cores: 1\n*******************************\n\n", + "status": "FAILED" + }, + "perl.PerlTest.test_perl_works": { + "status": "PASSED" + }, + "ping.PingTest.test_ping": { + "status": "PASSED" + }, + "ptest.PtestRunnerTest.test_ptestrunner": { + "log": "Test requires ptest-runner to be installed", + "status": "SKIPPED" + }, + "python.PythonTest.test_python3": { + "status": "PASSED" + }, + "rpm.RpmBasicTest.test_rpm_help": { + "status": "PASSED" + }, + "rpm.RpmBasicTest.test_rpm_query": { + "status": "PASSED" + }, + "rpm.RpmBasicTest.test_rpm_query_nonroot": { + "status": "PASSED" + }, + "rpm.RpmInstallRemoveTest.test_check_rpm_install_removal_log_file_size": { + "status": "PASSED" + }, + "rpm.RpmInstallRemoveTest.test_rpm_install": { + "status": "PASSED" + }, + "rpm.RpmInstallRemoveTest.test_rpm_remove": { + "status": "PASSED" + }, + "scp.ScpTest.test_scp_file": { + "status": "PASSED" + }, + "ssh.SSHTest.test_ssh": { + "status": "PASSED" + }, + "stap.StapTest.test_stap": { + "status": "PASSED" + }, + "systemd.SystemdBasicTests.test_systemd_basic": { + "status": "PASSED" + }, + "systemd.SystemdBasicTests.test_systemd_failed": { + "status": "PASSED" + }, + "systemd.SystemdBasicTests.test_systemd_list": { + "status": "PASSED" + }, + "systemd.SystemdJournalTests.test_systemd_boot_time": { + "status": "PASSED" + }, + "systemd.SystemdJournalTests.test_systemd_journal": { + "status": "PASSED" + }, + "systemd.SystemdServiceTests.test_systemd_disable_enable": { + "status": "PASSED" + }, + "systemd.SystemdServiceTests.test_systemd_status": { + "status": "PASSED" + }, + "systemd.SystemdServiceTests.test_systemd_stop_start": { + "status": "PASSED" + }, + "xorg.XorgTest.test_xorg_running": { + "status": "PASSED" + } + } + } +}
\ No newline at end of file |