diff options
Diffstat (limited to 'meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch')
| -rw-r--r-- | meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch | 217 |
1 files changed, 217 insertions, 0 deletions
diff --git a/meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch b/meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch new file mode 100644 index 00000000..4b9d72be --- /dev/null +++ b/meta-xilinx-contrib/recipes-bsp/u-boot/files/minized-u-boot.patch @@ -0,0 +1,217 @@ +From dfe572bcea9b74086d5bd9b963af26e64a043336 Mon Sep 17 00:00:00 2001 +From: Clement Laigle <clement.laigle8@gmail.com> +Date: Sun, 10 Jun 2018 23:21:28 +0200 +Subject: [PATCH] zynq: Add initial support for Avnet MiniZed + +Initial support for Avnet MiniZed board. + +Signed-off-by: Clement Laigle <clement.laigle8@gmail.com> +--- + arch/arm/dts/Makefile | 1 + + arch/arm/dts/zynq-minized.dts | 106 +++++++++++++++++++++++++++++++++++++++++ + configs/zynq_minized_defconfig | 68 ++++++++++++++++++++++++++ + 3 files changed, 175 insertions(+) + create mode 100644 arch/arm/dts/zynq-minized.dts + create mode 100644 configs/zynq_minized_defconfig + +diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile +index a895c70..32f9ae1 100644 +--- a/arch/arm/dts/Makefile ++++ b/arch/arm/dts/Makefile +@@ -132,6 +132,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ + zynq-cse-qspi-single.dtb \ + zynq-microzed.dtb \ + zynq-picozed.dtb \ ++ zynq-minized.dtb \ + zynq-syzygy-hub.dtb \ + zynq-topic-miami.dtb \ + zynq-topic-miamilite.dtb \ +diff --git a/arch/arm/dts/zynq-minized.dts b/arch/arm/dts/zynq-minized.dts +new file mode 100644 +index 0000000..3a05518 +--- /dev/null ++++ b/arch/arm/dts/zynq-minized.dts +@@ -0,0 +1,106 @@ ++// SPDX-License-Identifier: GPL-2.0+ ++/* ++ * dts file for Avnet MiniZed board ++ * ++ * (C) Copyright 2017 - 2018, Xilinx, Inc. ++ * ++ * Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com> ++ */ ++ ++/dts-v1/; ++#include "zynq-7000.dtsi" ++ ++/ { ++ model = "Avnet Zynq MiniZed Development Board"; ++ compatible = "avnet,minized", "xlnx,zynq-7000"; ++ ++ aliases { ++ serial0 = &uart1; ++ serial1 = &uart0; ++ spi0 = &qspi; ++ mmc0 = &sdhci0; ++ }; ++ ++ memory@0 { ++ device_type = "memory"; ++ reg = <0x0 0x20000000>; ++ }; ++ ++ chosen { ++ bootargs = ""; ++ stdout-path = "serial0:115200n8"; ++ }; ++ ++ usb_phy0: phy0 { ++ compatible = "usb-nop-xceiv"; ++ #phy-cells = <0>; ++ }; ++}; ++ ++&qspi { ++ status = "okay"; ++ is-dual = <0>; ++ num-cs = <1>; ++ flash@0 { ++ compatible = "micron,m25p128"; ++ reg = <0x0>; ++ spi-tx-bus-width = <4>; ++ spi-rx-bus-width = <4>; ++ spi-max-frequency = <50000000>; ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ partition@0 { ++ label = "boot"; ++ reg = <0x0 0xff0000>; ++ }; ++ ++ partition@270000 { ++ label = "kernel"; ++ reg = <0x270000 0xd80000>; ++ }; ++ ++ partition@ff0000 { ++ label = "bootenv"; ++ reg = <0xff0000 0x10000>; ++ }; ++ ++ partition@1000000 { ++ label = "spare"; ++ reg = <0x1000000 0x0>; ++ }; ++ }; ++ }; ++}; ++ ++&uart0 { ++ status = "okay"; ++}; ++ ++&uart1 { ++ u-boot,dm-pre-reloc; ++ status = "okay"; ++}; ++ ++&usb0 { ++ status = "okay"; ++ dr_mode = "host"; ++ usb-phy = <&usb_phy0>; ++ usb-reset = <&gpio0 7 0>; /* USB_RST_N-MIO7 */ ++}; ++ ++&sdhci1 { ++ status = "okay"; ++ non-removable; ++ bus-width = <4>; ++ max-frequency = <12000000>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ mmccard: mmccard@0 { ++ compatible = "mmc-card"; ++ reg = <0>; ++ broken-hpi; ++ }; ++}; +diff --git a/configs/zynq_minized_defconfig b/configs/zynq_minized_defconfig +new file mode 100644 +index 0000000..44d65fc +--- /dev/null ++++ b/configs/zynq_minized_defconfig +@@ -0,0 +1,68 @@ ++CONFIG_ARM=y ++CONFIG_ARCH_ZYNQ=y ++CONFIG_SYS_TEXT_BASE=0x4000000 ++CONFIG_SPL=y ++CONFIG_SPL_STACK_R_ADDR=0x200000 ++CONFIG_DEFAULT_DEVICE_TREE="zynq-minized" ++CONFIG_DEBUG_UART=y ++CONFIG_DISTRO_DEFAULTS=y ++# CONFIG_DISPLAY_CPUINFO is not set ++CONFIG_FIT=y ++CONFIG_FIT_SIGNATURE=y ++CONFIG_FIT_VERBOSE=y ++CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd" ++CONFIG_SPL_STACK_R=y ++CONFIG_SPL_OS_BOOT=y ++CONFIG_SYS_PROMPT="Zynq> " ++CONFIG_CMD_THOR_DOWNLOAD=y ++CONFIG_CMD_DFU=y ++# CONFIG_CMD_FLASH is not set ++CONFIG_CMD_FPGA_LOADBP=y ++CONFIG_CMD_FPGA_LOADFS=y ++CONFIG_CMD_FPGA_LOADMK=y ++CONFIG_CMD_FPGA_LOADP=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_MMC=y ++CONFIG_CMD_SF=y ++CONFIG_CMD_USB=y ++# CONFIG_CMD_SETEXPR is not set ++CONFIG_CMD_TFTPPUT=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_EXT4_WRITE=y ++CONFIG_ENV_IS_IN_SPI_FLASH=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_SPL_DM_SEQ_ALIAS=y ++CONFIG_DFU_MMC=y ++CONFIG_DFU_RAM=y ++CONFIG_FPGA_XILINX=y ++CONFIG_FPGA_ZYNQPL=y ++CONFIG_DM_GPIO=y ++CONFIG_MMC_SDHCI=y ++CONFIG_MMC_SDHCI_ZYNQ=y ++CONFIG_SPI_FLASH=y ++CONFIG_SPI_FLASH_BAR=y ++CONFIG_SPI_FLASH_SPANSION=y ++CONFIG_SPI_FLASH_STMICRO=y ++CONFIG_SPI_FLASH_WINBOND=y ++CONFIG_PHY_MARVELL=y ++CONFIG_PHY_REALTEK=y ++CONFIG_PHY_XILINX=y ++CONFIG_ZYNQ_GEM=y ++CONFIG_DEBUG_UART_ZYNQ=y ++CONFIG_DEBUG_UART_BASE=0xe0001000 ++CONFIG_DEBUG_UART_CLOCK=50000000 ++CONFIG_ZYNQ_SERIAL=y ++CONFIG_ZYNQ_QSPI=y ++CONFIG_USB=y ++CONFIG_USB_EHCI_HCD=y ++CONFIG_USB_ULPI_VIEWPORT=y ++CONFIG_USB_ULPI=y ++CONFIG_USB_STORAGE=y ++CONFIG_USB_GADGET=y ++CONFIG_USB_GADGET_MANUFACTURER="Xilinx" ++CONFIG_USB_GADGET_VENDOR_NUM=0x03fd ++CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 ++CONFIG_CI_UDC=y ++CONFIG_USB_GADGET_DOWNLOAD=y ++CONFIG_USB_FUNCTION_THOR=y ++CONFIG_OF_EMBED=y +-- +2.7.4 + |