diff options
authorDevarsh Thakkar <devarsh.thakkar@xilinx.com>2018-01-25 18:53:11 -0800
committerManjukumar Matha <manjukumar.harthikote-matha@xilinx.com>2018-06-07 05:55:41 -0700
commitd45f3e864c4479d7697bcc5350a9588b0b0a5e02 (patch)
parent4e3520a9f4bb2386fb61f3e98c42b5e3721b973c (diff)
zcu106-zynqmp.conf: Add support for ZCU106 Evaluation Kit
The ZCU106 Evaluation Kit enables designers to jumpstart designs for video conferencing, surveillance, Advanced Driver Assisted Systems (ADAS) and streaming and encoding applications. This kit features a Zynq® UltraScale+™ MPSoC EV device and supports all major peripherals and interfaces, enabling development for a wide range of applications. The included ZU7EV device is equipped with a quad-core ARM® Cortex™-A53 applications processor, dual-core Cortex-R5 real-time processor, Mali™-400 MP2 graphics processing unit, 4KP60 capable H.264/H.265 video codec, and 16nm FinFET+ programmable logic. This patch adds machine configuration file for ZCU106 Evaluation Kit with required setting of board specific yocto variables needed for compilation of bootloader, kernel and device-tree. - linux-xlnx is the kernel provider - u-boot-xlnx is the u-boot provider which will also generate SPL boot.bin - hwcodec is provided by libomxil-xlnx recipe, this will pull in additional dependencies of VCU kernel modules, control software, firmware binaries Depending on the application need you may want to pass the appropriate CMA size in bootargs or set CONFIG_CMA_SIZE_MBYTES in kernel. While using SPL flow, you may need to provide additional hack to pass the PMU config object. This is similar to all ZU+ boards, due to gap in SPL flow unable to load PMU config object. Signed-off-by: Devarsh Thakkar <devarsht@xilinx.com> Tested-by: Maulik Desai <maulik.desai@xilinx.com> Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
2 files changed, 34 insertions, 0 deletions
diff --git a/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf
new file mode 100644
index 0000000..42ac479
--- /dev/null
+++ b/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf
@@ -0,0 +1,33 @@
+#@TYPE: Machine
+#@NAME: zcu106-zynqmp
+#@DESCRIPTION: Machine support for ZCU106 Evaluation Board.
+require conf/machine/include/tune-zynqmp.inc
+require conf/machine/include/machine-xilinx-default.inc
+require conf/machine/include/machine-xilinx-board.inc
+include conf/machine/include/zynqmp-pmu-config.inc
+MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost"
+UBOOT_MACHINE = "xilinx_zynqmp_zcu106_revA_defconfig"
+SPL_BINARY = "spl/boot.bin"
+SERIAL_CONSOLE = "115200 ttyPS0"
+KERNEL_DEVICETREE = "xilinx/zynqmp-zcu106-revA.dtb"
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx"
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx"
+PREFERRED_PROVIDER_virtual/pmu-firmware ?= "zynqmp-pmu-pmu-firmware"
+ u-boot-zynq-uenv \
+ arm-trusted-firmware \
+ virtual/pmu-firmware \
+ virtual/boot-bin \
+ "
+IMAGE_BOOT_FILES += "uEnv.txt atf-uboot.ub ${KERNEL_IMAGETYPE}-zynqmp-zcu106-revA.dtb"
+MACHINE_HWCODECS = "libomxil-xlnx"
diff --git a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb
index e503f82..d5e746e 100644
--- a/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb
+++ b/meta-xilinx-bsp/recipes-bsp/u-boot/u-boot-xlnx_2018.1.bb
@@ -21,5 +21,6 @@ HAS_PLATFORM_INIT ?= " \
zynq_zc706_config \
zynq_zybo_config \
xilinx_zynqmp_zcu102_rev1_0_config \
+ xilinx_zynqmp_zcu106_revA_config \