meta-qt3 ======== This layer provides Qt 3.x libraries. Its intended use is for passing LSB tests as Qt3 is a requirement for LSB; however the libraries may also be used for any other purpose requiring Qt3. -------------------------------- Build an LSB image including Qt3 -------------------------------- You can build an LSB image including Qt3 using the following steps: 1. Add meta-qt3 path to COREBASE/build/conf/bblayers.conf file 2. Set DISTRO = "poky-lsb" in COREBASE/build/conf/local.conf file 3. Build lsb-image including qt3 $ bitbake core-image-lsb-qt3 Note: "core-image-lsb-qt3" is the image prepared to meet the demands of LSB. -------------------------------- Include Qt3 in your custom image -------------------------------- If you only want to add Qt3 to your custom image, then you should perform the following steps: 1. Add meta-qt3 path to COREBASE/build/conf/bblayers.conf file 2. Add task-core-qt3 file to your custom image. For example, if core-image-custom.bb is your building image file, then you should add task-core-qt3 to IMAGE_INSTALL in core-image-custom.bb 3. Build your custom image in build directory $ bitbake core-image-custom