Age | Commit message (Collapse) | Author |
|
Default configuration have been moved in the shared include file,
since 7829b0f0f691 (linux-linaro-qcomlt: move common settings to the
include file), so there is no need to repeat them in each new kernel
recipe.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
recipes-kernel: Linux 5.13 bump to rev a14713f34448 (v5.13.5)
|
|
Changes are from stable v5.13.4..v5.13.5, and,
108d71930dc8 arch/arm64: defconfig enable MFD QCOM_{RPM, QCA639X}
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
linux-linaro-qcomlt_5.13.bb: Remove duplicate inclusion of linux-qcom…
|
|
linux-qcom-bootimg.inc
Fixes parse warning
linux-linaro-qcomlt_5.13.bb: Duplicate inclusion for
/mnt/b/yoe/master/sources/meta-qcom/recipes-kernel/linux/linux-qcom-bootimg.inc in /mnt/b/yoe/master/sources/meta-qcom/
recipes-kernel/linux/linux-linaro-qcomlt_5.13.bb
% git grep linux-qcom-bootimg.inc
recipes-kernel/linux/linux-linaro-qcom.inc:require recipes-kernel/linux/linux-qcom-bootimg.inc
recipes-kernel/linux/linux-linaro-qcomlt_5.13.bb:require recipes-kernel/linux/linux-qcom-bootimg.inc
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
conf/machine: Set default SERIAL_CONSOLES in qcom-common.inc
|
|
The SERIAL_CONSOLES var is used inside systemd-serialgetty.bb to
generate systemd unit to get console after boot, this fix no console in
DB845c.
Changes,
Remove SERIAL_CONSOLES set in sdx55-mtp.conf since is the default one.
Add override in sdx55-telit-fn980 to set serial console.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
recipes-kernel: Add Linux 5.13 recipe
|
|
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
recipes-graphics: mesa_git removed not needed patches
|
|
recipes-support: rmtfs bump to rev 293ab8b
|
|
Change,
293ab8b storage: Sync changes
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
0004-Revert-mesa-Enable-asm-unconditionally-now-that-gen_.patch, now in
upstream,
https://gitlab.freedesktop.org/mesa/mesa/-/commit/45206d7673adb1484cbdb3eadaf82e0849c9cdcf?merge_request_iid=1974
0003-Allow-enable-DRI-without-DRI-drivers.patch, not needed now in
recipe logic.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
qrb5165-rb5: drop lt9611uxc-upgrade
|
|
Drop lt9611uxc-upgrade recipe, it is not used anymore.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Stop installing lt9611uxc-upgrade package, it was found to be confusing
to users. It will be replaced by the notice in the release notes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Kernel recipes improvements
|
|
Update firmware packages
|
|
recipes-graphics: mesa_git refresh patches and fix deqp filename
|
|
The deqp skips file was renamed, see,
https://gitlab.freedesktop.org/mesa/mesa/-/commit/9cc1f089196f2f5c695dbf5f42b947b9970b8965
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
recipes-multimedia: Remove alsa-ucm-conf patches
|
|
The alsa-ucm-conf was bump to v1.2.5 and patches are already in
upstream.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
fastrpc: Update to latest SRCREV for SDK headers
|
|
The tip-of-tree fastrpc has had an updated applied such that it is possible
when running `bitbake rpb-desktop-image -c populate_sdk` to now populate
fastrpc headers into the resulting x-compiler.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
|
|
Fixes for dsp partition mount
|
|
lt9611uxc-upgrade script: Only cat firmware version when it exists
|
|
In case dspso image is not available, we'd try to mount existing
partition using partlabel. Wait for /dev/disk/by-partlabel dir to become
available.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Modprobe socinfo module before trying to read machine id.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Fix the MACHINE case for the qrb5165 SoC (it was QRB5160 by my mistake).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Update script to only execute cat in directories where lt9611uxc_firmware
exists.
On my system both module and 5-002b are symbolic links, thus the previous
script would cause the lt9611uxc firmware update systemd unit to fail because
the script would try to access lt9611uxc_firmware in the module directory and
return a failure which would cause the systemd service to be listed under
'systemctl list-units --failed'
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
|
|
recipes-graphics: mesa_git update to rev 26677008b9a
|
|
conf/machine: Add linux-firmware-qca for dragonboard-820c
|
|
To install qca/nvm_00440302.bin required for bluetooth.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
- Update branch name to main.
- Update PV to 2x.x-dev recently mesa bump to 21.x versions so use 2x.x
for our mesa_git dev build.
- Refresh patches to avoid warnings when apply.
Signed-off-by: Aníbal Limón <anibal.limon@linaro.org>
|
|
layer.conf: set LAYERDEPENDS
|
|
meta-qcom depends only oe-core, mark it explicitely. The layer has
additional dependencies on meta-oe or meta-networking, but they are
optional.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Firmware 1036.1 was never release for further redistribution, however it
can be manually downloaded from Qualcomm site. Add a recipe to build it.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Install an image with DSP shell and libraries.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Install an image with DSP shell and libraries.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Change all firmware packages to use allarch.bbclass (as linux-firmware
does) rather than tying them to the ${MACHINE}, since there is nothing
machine-specific in firmware packgages themselves (and qcom-armv8a
machine will include some of them anyway).
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Simplify handling of kernel config:
- call sed directly from kernel_conf_variable function
- split do_confugure into prepend and append functions to be wrapped
around kernel_do_configure (removing make oldconfig call)
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Move common linux-linaro-qcomlt settings to the include file, allowing
recipes to contain just the 'reqiure' line and SRCREV.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Use 'arm' override for apq8064 and sdx55 instead of specifying them one-by-one.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Remove unused removal of 'arch' from ERROR_QA: kernel build no longer
include WiFi firmware, so this is unused.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
linux-linaro-qcomlt_5.12: update SRCREV
|
|
Update SRCREV to include Venus firmware filename fix.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|
|
lt9611uxc-upgrade: fix systemd condition name
|
|
RB5: update firmware-qcom-rb5 and linux-linaro-qcomlt
|
|
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
|