aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-09-09runqemu: refactor it and remove machine knowledgeRobert Yang
Previously, runqemu had hard coded machine knowledge, which limited its usage, for example, qemu can boot genericx86, but runqemu can't, we need edit runqemu/runqemu-internal a lot if we want to boot genericx86. Now bsp conf files can set vars to make it can be boot by runqemu, and qemuboot.bbclass will save these info to DEPLOY_DIR_IMAGE/qemuboot.conf. Please see qemuboot.bbclass' comments on how to set the vars. * Re-write it in python3, which can reduce lines from 1239 to about 750 lines * All the machine knowledges are gone * All of the TUN_ARCH knowledge are gone * All the previous options are preserved, and there is a new way to run runqemu: (it doesn't need run "bitake -e" in such a case) $ runqemu tmp/deploy/images/qemux86 or: $ runqemu tmp/deploy/images/qemuarm/<image>.ext4 or: $ runqemu tmp/deploy/images/qemuarm/qemuboot.conf * Fixed audio support, not limited on x86 or x86_64 * Fix SLIRP mode, add help message, avoid mixing with tap * Fix NFS boot, it will extract <image>.tar.bz2 or tar.gz to DEPLOY_DIR_IMAGE/<image>-nfsroot when no NFS_DIR, and remove it after stop. * More bsps can be boot, such as genericx86 and genericx86-64. * The patch for qemuzynq, qemuzynqmp, qemumicroblaze has been sent to meta-xilinx' mailing list. * I can't find any qemush4 bsp or how to build it, so it is not considered atm. [YOCTO #1018] [YOCTO #4827] [YOCTO #7459] [YOCTO #7887] (From OE-Core rev: 60ca8a8d899b90a4693fd62b6ec97d0c76a9f6c5) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemu.inc: inherit qemuboot.bbclassRobert Yang
All qemu boards should be able to boot by runqemu. (From OE-Core rev: 5174889d59a5d6da29b4290376010dd176767e1f) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuppc: Use virtio networking instead of pcnetRichard Purdie
qemuppc can use virtio networking and we may as well do so for better prformance as we do under the other emulated hardware. (From OE-Core rev: 8a82ded799be79eacb64cf313b6f2799a4f5ffab) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuppc.conf: set vars for runqemuRobert Yang
(From OE-Core rev: 2c8e5657cafafe848c7e7c714e5e73bb82799d65) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemumips/qemumips64.conf: set vars for runqemuRobert Yang
Add qemuboot-mips.inc to reduce duplicated code, the various mips bsps which can be boot by runqemu can require qemuboot-mips.inc (From OE-Core rev: cb28128477e98ed7dc7a90dd197f6dd04cf75be0) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemux86.conf/qemux86-64.conf: set vars for runqemuRobert Yang
Add qemuboot-x86.inc to reduce duplicated code, the x86/x86_64 bsps which can be boot by runqemu can require qemuboot-x86.inc. (From OE-Core rev: b5ff3dda2a576ba7e5d68198ea6c6eb49cf80eb8) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuarm64.conf: set vars for runqemuRobert Yang
(From OE-Core rev: 73bccbbfc0f987fc82aca5411e15f62c02e5336c) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuarm.conf: set PREFERRED_VERSION_linux-yoctoRobert Yang
The base_version_less_or_equal() will raise errors if PREFERRED_VERSION_linux-yocto is None. For example, when we build DISTRO = "nodistro", PREFERRED_VERSION_linux-yocto is not be defined since it is defined in poky.conf, and then bitbake will choose the higher version which is 4.8 currently, so set PREFERRED_VERSION_linux-yocto to 4.8, otherwise, runqemu can't boot it. (From OE-Core rev: fd31e30f97ee9bd128d5b7b748987b0a6427b279) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuarm: Add DTB file new kernelRichard Purdie
For kernels after 4.7, we need to ensure the DTB file for the kernel is used by runqemu. Doing this conditionally based upon the kernel verison being built seems to be the only way forward for this. (From OE-Core rev: 4615764509234bfb206ffe4cd430653b88d46ec3) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuarm.conf: set vars for runqemuRobert Yang
These info are from old runqemu. (From OE-Core rev: f22f09f8e1bb24e92e9109fcd7a347277acedcce) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemuboot.bbclass: add it for runqemuRobert Yang
It saves vars in ${DEPLOY_DIR_IMAGE}/<image>.qemuboot.conf, and runqemu will read it. The bsp which can be boot by runqemu will inherit it. (From OE-Core rev: 1675e9b89e00b875d0da13411a2a939aa4ba5298) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemu: fix: cp command cannot find tests/MakeflieJianxun Zhang
bitbake qemu This error shows up: ERROR: qemu-2.7.0-r1 do_install_ptest_base: Function failed: do_install_ptest_base ... cp: cannot stat '...tmp/work/core2-64-poky-linux/qemu/2.7.0-r1 /qemu-2.7.0/tests/Makefile: No such file or directory ... Commit 46e7b70699d8bf4db08c8bb5111974318dd5416d in qemu project renamed tests/Makefile to tests/Makefile.include, we apply the same change in recipe accordingly to fix this issue. Fixes [YOCTO #10245] (From OE-Core rev: 7009a9309051061455fa7237e09796ef12c9e308) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09qemu: 2.6.0 -> 2.7.0Robert Yang
This upgrade can fix a qemuppc + openssh bug, the ssh connection maybe refused or closed randomly, and it's not easy to reproduce. RP pointed that this upgrade can fix the problem, and it does work in my local testing. * Update add-ptest-in-makefile.patch * Drop backported patch 0001-configure-support-vte-2.91.patch Here is the Changlog: http://wiki.qemu.org/ChangeLog/2.7 (From OE-Core rev: 056ce17e168bf856ff95a6f659098403169cb889) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09parselogs: Whitelist qemux86 error message with qemu 2.7.0Robert Yang
qemu 2.7.0 introduces kernel errors: [ 2.310768] pci 0000:00:00.0: [11ab:4620] type 00 class 0x060000 [ 2.311338] pci 0000:00:00.0: [Firmware Bug]: reg 0x14: invalid BAR (can't size) [ 2.311604] pci 0000:00:00.0: [Firmware Bug]: reg 0x18: invalid BAR (can't size) [ 2.311835] pci 0000:00:00.0: [Firmware Bug]: reg 0x1c: invalid BAR (can't size) [ 2.312063] pci 0000:00:00.0: [Firmware Bug]: reg 0x20: invalid BAR (can't size) [ 2.312323] pci 0000:00:00.0: [Firmware Bug]: reg 0x24: invalid BAR (can't size) [ 2.314320] pci 0000:00:0a.0: [8086:7110] type 00 class 0x060100 [ 2.315363] pci 0000:00:0a.1: [8086:7111] type 00 class 0x010180 Whitelist this for now since this is preferable to the random failures we're seeing from qemuppc with 2.6.0. (From OE-Core rev: 4d542cdc86c34f0f4a3dde8b0aab059bca76a9fb) Signed-off-by: Robert Yang <liezhi.yang@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09parselogs: Whitelist qemuppc error message with qemu 2.7.0Richard Purdie
qemu 2.7.0 introduces kernel errors: [0.474981] pci 0000:00:0f.0: reg 0x10: [io 0x0400-0x041f] [0.483796] pci 0000:00:0f.0: reg 0x20: can't handle BAR above 4GB (bus address 0xffffffff82800000) [0.484204] pci 0000:00:0f.0: reg 0x20: [mem size 0x00800000 64bit pref] [0.488077] pci 0000:00:0f.0: reg 0x30: [mem 0x83000000-0x8303ffff pref] [0.488903] pci 0000:00:10.0: [1af4:1005] type 00 class 0x00ff00 [0.490485] pci 0000:00:10.0: reg 0x10: [io 0x0480-0x049f] [0.496512] pci 0000:00:10.0: reg 0x20: can't handle BAR above 4GB (bus address 0xffffffff83800000) [0.496783] pci 0000:00:10.0: reg 0x20: [mem size 0x00800000 64bit pref] [0.500345] pci 0000:00:11.0: [1af4:1001] type 00 class 0x010000 [0.501790] pci 0000:00:11.0: reg 0x10: [io 0x0500-0x053f] [0.507362] pci 0000:00:11.0: reg 0x20: can't handle BAR above 4GB (bus address 0xffffffff84000000) [0.507677] pci 0000:00:11.0: reg 0x20: [mem size 0x00800000 64bit pref] [0.513905] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [0.516493] PCI 0000:00 Cannot reserve Legacy IO [io 0x0000-0x0fff] [0.517512] pci 0000:00:0f.0: BAR 4: assigned [mem 0x80800000-0x80ffffff 64bit pref] [0.518877] pci 0000:00:10.0: BAR 4: assigned [mem 0x82800000-0x82ffffff 64bit pref] [0.519890] pci 0000:00:11.0: BAR 4: assigned [mem 0x83800000-0x83ffffff 64bit pref] Whitelist this for now since this is preferable to the random failures we're seeing from qemuppc with 2.6.0. (From OE-Core rev: 2472ed5393ab01ad79c011ea19c73224ed5125de) Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09libwebp: sepcify neon availability for armJoe Slater
Defeat automatic neon detection. (From OE-Core rev: 1a563214caf6bd5b3a026ebe953f8c692ebd640a) Signed-off-by: Joe Slater <jslater@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09utils.bbclass: Added error checking for oe_soinstallHenry Bruce
Fixes [YOCTO #10146] (From OE-Core rev: cd5d532bd2a3f409b9470591c8d6f6b21e5995dd) Signed-off-by: Henry Bruce <henry.bruce@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09utils.bbclass: Remove trailing whitespaceHenry Bruce
(From OE-Core rev: 1868db95819b45961cd7e8499ecace403e6bc91d) Signed-off-by: Henry Bruce <henry.bruce@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09watchdog-config: Add recipeFabio Berton
Provides configuration files for watchdog. Add watchdog-config as a runtime dependence of watchdog and remove watchdog.conf file from watchdog installation. (From OE-Core rev: 6864ad2e863205472f8ea2057c61e949dc450151) Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09watchdog: Add wd_keepalive packageFabio Berton
This is a simplified version of the watchdog daemon. It only opens /dev/watchdog, and keeps writing to it often enough to keep the kernel from resetting, at least once per minute. Each write delays the reboot time another minute. After a minute of inactivity the watchdog hardware will cause a reset. In the case of the software watchdog the ability to reboot will depend on the state of the machines and interrupts. Installs wd_keepalive binary and enable initscript. (From OE-Core rev: b76af8a0982c3c7473bd6ba067d1c8030d4d2f26) Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09linux-yocto: update LINUX_VERSION to -rc5Bruce Ashfield
The SRCREVs were previously updated to -rc5, but the LINUX_VERSION was missed. As such, we are building and booting -rc5, but all the packaging says -rc4. Worth a quick update while we wait for -rc6 (From OE-Core rev: ea2f99161a22ae2e9eefd3b337c9af7704c33e37) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09kconfig-frontends: inherit pkgconfigMaxin B. John
Instead of build depending on pkgconfig-native, inherit pkgconfig class which does the same thing. (From OE-Core rev: 3a2b6b5ee1e43ec9c968062a3fbeb0e1a4630c18) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09kmod: inherit pkgconfigMaxin B. John
Instead of DEPENDS += "pkgconfig-native", inherit pkgconfig class which does the same. (From OE-Core rev: dbaa536c569d728f47f949fedbab165b73c9985d) Signed-off-by: Maxin B. John <maxin.john@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09x11-common: Remove Xserver scriptJussi Kukkonen
X startup is now handled in xserver-nodm-init. (From OE-Core rev: 877851cf0f76a5052900954670fb64aed27a7a1f) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09xserver-nodm-init: Deprecate /etc/X11/XserverJussi Kukkonen
This commit should provide the same functionality as before, but should make meta-oe xserver-nodm-init-2.0 obsolete as well as keep systemd and sysvinit startup better in sync. /etc/X11/Xserver is not called anymore: it is provided by both x11-common and xserver-common with no useful differences (but some annoying ones). Instead xserver-nodm-init provides /etc/xserver-nodm/Xserver as the startup script and /etc/default/xserver-nodm as the default settings file. These are used by both init systems. The Xserver script could be completely removed (with sysv and systemd calling xinit directly), but to keep compatibility with meta-oes xserver-nodm-init-2.0 the Xserver script sources /etc/X11/xserver-common if one exists -- and systemd EnvironmentFile cannot do that. x11-common used to have a packageconfig to easily control screen blanking. Move this to xserver-nodm-init. (From OE-Core rev: e8ce3d2626e505924a75de96650abca166fd230a) Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09kernel-module-split.bbclass: no need for running depmodAndré Draszik
With the recent changes, executing depmod is not needed anymore. This simplifies and removes a lot of unnecessary code. (From OE-Core rev: 8296e258b36a6238605e068e13c1982b1d12fe53) Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09kernel-module-split.bbclass: generate dependencies across recipesAndré Draszik
The information retrieved via depmod is incomplete with regards to kernel modules that are dependencies, in particular where two kernel modules are built from different source trees / recipes, which leads to incomplete dependency information for packages created. So far, our packages created didn't contain dependencies on packages created by other recipes, as we solely use depmod for that, and depmod can only work well after *all* kernel modules have been copied into one place - it doesn't work well in a staged approach. Now that all .ko have correct dependency information at packaging time, we can use that information to properly track dependencies across recipies, and can combine the information from the .modinfo elf section with the information from depmod. (From OE-Core rev: e4af1fa3aee7f1cf00ca27944b10b886f41f2fda) Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-09module.bbclass: use Module.symvers for dependantsAndré Draszik
When compiling multiple external kernel modules, where one depends on the other, there are two problems at the moment: 1) we get compile time warnings from the kernel build system due to missing symbols (from modpost). 2) Any modules generated are missing dependency information (in the .modinfo elf section) for any dependencies outside the current source tree and outside the kernel itself. This is expected, but the kernel build system has a way to deal with this - the dependent module is expected to specify KBUILD_EXTRA_SYMBOLS (as a space-separated list) to point to any and all Module.symvers of kernel modules that are dependencies. While 1) by itself is not really a big issue, 2) prevents the packaging process from generating cross-source tree package dependencies. As a first step to solve the missing dependencies in packages created, we: 1) install Module.symvers of all external kernel module builds (into a location that is automatically packaged into the -dev package) 2) make use of KBUILD_EXTRA_SYMBOLS and pass the location of all Module.symvers of all kernel-module-* packages we depend on This solves both problems mentioned above. (From OE-Core rev: 88f1bc77c22091fccb00e80839adfdf34534187f) Signed-off-by: André Draszik <git@andred.net> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08linux-yocto/4.4/4.8: uvesafb: provide option to specify timeout for task ↵Bruce Ashfield
completion Integrating the following patch: [ We try to make this change a generic extension, but it is actually for a corner case. When a VM (qemu) gets a very limited cpu bandwidth from host, which could be under a heavy load, the existing 5000 ms timeout could occur and trigger error messages in the task function's callers. This change adds a new timeout parameter so that we can tweak the value as a workaround or for troubleshooting purposes. In the infinite wait case, A warning message is printed at 5000ms interval. In real world, the current 5 sec is generous enough for a video request in my opinion, so this change could not be very useful. Upstream Status: Inappropriate Signed-off-by: Jianxun Zhang <jianxun.zhang@linux.intel.com> ] (From OE-Core rev: 872a83be6e86005f6426c90073ece56de4534ac0) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08linux-yocto: update to 4.8-rc5Bruce Ashfield
(From OE-Core rev: 3d9735e3ccacbd60e060683c41c4203184fce109) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08kernel-yocto: restore missing configuration meta dataBruce Ashfield
Some of the meta-data from the 4.4 kernel was missing from the 4.8 branch. This resulted in some functionality drops and also a size/time increase in the kernel build (due to debug being turned on). With this resync, we now have the missing config restored. (From OE-Core rev: eb0b4f05f89ae014953492ea7bc0afc9fef1abce) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08kernel-yocto: allow --allnoconfig and --alldefconfig as KCONFIG_MODESBruce Ashfield
Previously merge_config.sh was wrapped by the configme script, configme took the different KCONFIG_MODES as options, and used --allnoconfig or --alldefconfig. With the switch to merge_config.sh no longer being wrapped, the new processing wasn't matching the existing values and only supported allnoconfig or alldefconfig. To avoid breaking existing layers, and also keep any working that have already switched, we can make the case statement match both. (From OE-Core rev: 614227f28a023fe148307e0d85a5e9b8d9b74372) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08kernel-yocto: restore kernel-meta data detection for SRC_URI elementsBruce Ashfield
Before the kernel tools were simplified and streamlined, there was code which not only migrated a patch/cfg/scc to the kernel build tree, it also migrated any subdirectories of those patches. The effect of this data migration was that any other meta data in a patch's directory structure would be available for processing. While we don't want to do this migration anymore, it is possible to check the path of any SRC_URI patches, and if they include a "kernel-meta" subdirectory add it to the search path. This restores the functionality without the old complexity. (From OE-Core rev: 7ef7af5c03bad28faf380986f792f7f3d4d5944d) Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08recipetool: create: avoid extra blank lines in output recipePaul Eggleton
If we output extra blank lines (because of some automated editing) then it makes the output recipe look a bit untidy. You could argue that we should simply have the editing code not do that, but sometimes we don't have enough context there for that to be practical. It's simple enough to just filter out the extra blank lines when writing the file, so just do it that way. (From OE-Core rev: cbebc9a2edf7d7a422ee5c71219e79e3b349de3b) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08recipetool: create: support node.js code outside of npmPaul Eggleton
If you have your own node.js application you may not publish it (or at least not immediately) in an npm registry - it might just be in a repository on github or on your local machine. Add support to recipetool create for creating recipes to build such applications - extract their dependencies, fetch them, and add corresponding npm:// URLs to SRC_URI, and ensure that LICENSE / LIC_FILES_CHKSUM are updated to match. For example, you can now run: recipetool create https://github.com/diversario/node-ssdp (I had to borrow some code from bitbake/lib/bb/fetch2/npm.py to implement this functionality; this should be refactored out but now isn't the time to do that refactoring.) Part of the fix for [YOCTO #9537]. (From OE-Core rev: 4fb8b399c05a1b66986fc76e13525f6c5e0d9b58) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08recipetool: create: allow license variable handling to be rerunPaul Eggleton
If you make adjustments to the source tree (as create_npm.py will be) then you will need to re-run the license variable handling code at the end so that we get all of the files that should go into LIC_FILES_CHKSUM if nothing else. Split out the license variable handling to a separate function in order to allow this. (From OE-Core rev: f0d6f4b7e87ea781ac0dffcc8d0310570975811b) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08recipetool: create: add --keep-temp command line optionPaul Eggleton
For debugging it's useful to be able to tell recipetool to keep the temporary directory. (From OE-Core rev: 480a6b745a85b2881e5cc1a0bbb572e3235ca008) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08recipetool: create: support git submodulesPaul Eggleton
Ensure we fetch submodules and set SRC_URI correctly when pointing to a git repository that contains submodules. (From OE-Core rev: 65d5cc62d4ecfc78ce4b37b3886a7fe5aa05a75e) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08recipetool: create: fix mapping python dependencies to python-dbg packagePaul Eggleton
When trying to map python module dependencies to the packages that provide them, if we're looking for .so files that satisfy dependencies then we need to exclude files found under the .debug directory, otherwise the dependency will get mapped to the python-dbg package which isn't correct. For example, this fixes creating a recipe for pyserial and not getting python-fcntl in RDEPENDS_${PN}, leading to errors when trying to use the serial module on the target. (From OE-Core rev: 46a068ca35975988a8e9c0310f71fdcee55937a4) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08recipetool: create: AX_PKG_SWIG should add dependency on swig-nativePaul Eggleton
If AX_PKG_SWIG is found in configure.ac, then what's being looked for is the swig binary, not swig for the target - so fix the dependency accordingly. (From OE-Core rev: 2600cd6f6c63ecf79804e2bc6eb6f198a012d5d6) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08devtool: update-recipe: support files with subdir=Paul Eggleton
It's rare but there are recipes that have individual files (as opposed to archives) in SRC_URI using subdir= to put them under the source tree, the examples in OE-Core being bzip2 and openssl. This broke devtool update-recipe (and devtool finish) because the file wasn't unpacked into the oe-local-files directory and thus when it came time to update the recipe, the file was assumed to have been deleted by the user and thus the file was erroneously removed. Add logic to handle these properly so that this doesn't happen. (We still have another potential problem in that these files become part of the initial commit from upstream, which could be confusing because they didn't come from there - but that's a separate issue and not one that is trivially solved.) (From OE-Core rev: 9069fef5dad5a873c8a8f720f7bcbc7625556309) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08lib/oe/patch: handle non-UTF8 encoding when reading patchesPaul Eggleton
When extracting patches from a git repository with PATCHTOOL = "git" we cannot assume that all patches will be UTF-8 formatted, so as with other places in this module, try latin-1 if utf-8 fails. This fixes UnicodeDecodeError running devtool update-recipe or devtool finish on the openssl recipe. (From OE-Core rev: 579e4d54a212d04cfece2c9fc0635d7ac1644058) Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08bitbake: cooker: record events on cooker exitEd Bartosh
Bitbake collects all events in special event queue when called with -w option. However, it starts to write events to the eventlog only after BuildStarted event is received. In some cases this event is not received at all, e.g. when bitbake is run with --parse-only command line option. It makes sense to write all collected events when CookerExit event received to make sure all events are written into the eventlog even if BuildStarted event is not fired. [YOCTO #10145] (Bitbake rev: 57912de63fa83550c0ae658eb99b76e9cc91a8d1) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08bitbake: toaster: don't kill all runserver processesEd Bartosh
Toaster script kills runserver process 2 ways: - sending signal to pid from .toastermain.pid. - sending signal to pids found by grepping ps output: ps fux | grep "python.*manage.py runserver" Second approach is redundant and harmfull as it kills all django development server running on the machine. [YOCTO #7973] (Bitbake rev: 0f47b17fe88dc660648d94b2d8d8286d87ae6295) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08bitbake: toaster: remove handling of .toasterui.pidEd Bartosh
This file is not created anywhere, but handled in toaster script code. (Bitbake rev: 16f3cd3535c9eec71ea7594c1e3a83db00dba7ca) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08bitbake: toaster: don't kill toaster on startEd Bartosh
There is no point of trying to kill django development server when toaster starts because 'manage.py checksocket' command is already used in the script code to check if development server port is occupied. Even if Toaster is listening on another port, killing previous instance looks quite implicit and doesn't solve anything as there are other processes that might be still running. (Bitbake rev: 0dab45e9815e8939219900264e86f569c714b7c6) Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08bitbake: toaster: orm Update IMAGE_FSTYPES valuesBelen Barros Pena
This patch fixes a typo in one of the IMAGE_FSTYPES values listed in Toaster. It also updates the hardcoded list of values to match the latest list in meta/classes/image_types.bbclass [YOCTO #9447] (Bitbake rev: 46db3279cb81b3ca6ce047204aee620f5ee51220) Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08bitbake: toaster: keep layer name in variable history pathDavid Reyna
When converting variable history file names to relative paths, keep the layer directory's name so that the user can distinguish between conf files with the same name. [YOCTO #8188] (Bitbake rev: 59561d652af91c2099b735084f0e44275d68e637) Signed-off-by: David Reyna <david.reyna@windriver.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08bitbake: toaster: Allow forward slash in variable namesBelen Barros Pena
Add forward slash to the list of special characters allowed in variable names. Also update the list of allowed special characters in the error messages. [YOCTO #9611] (Bitbake rev: 146f6f95a8753308edb31e952d7c440c8de11870) Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
2016-09-08bitbake: toaster: layer details Fix "edit" form interactionBelen Barros Pena
Make sure the layer information disappears when the edit form shows, and that the layer details come back when you click the 'cancel' button in the edit form. (Bitbake rev: bd08abe7c1f5fc96ee73c20b2c9d10a591a5f69c) Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com> Signed-off-by: Michael Wood <michael.g.wood@intel.com> Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-22 13:46:27 +0000