summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2023-05-21glib-networking add environment variable proxy PACKAGECONFIGRoss Burton
Add a PACKAGECONFIG for the environment variable proxy configuration (http_proxy, etc), and enable by default as this is the fallback provider if you're not using libproxy or gnomeproxy. (From OE-Core rev: c2def40caaa3e8eaecb78e8b6826e51bb2a4a81c) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21glib-networking: add gnomeproxy PACKAGECONFIGRoss Burton
Add a PACKAGECONFIG for the Gnome proxy configuration. (From OE-Core rev: 1bc9ec27c3819d8ac546f7712a5b36683ce5524f) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21glib-networking: fix LICENSE statementRoss Burton
The glib-networking license is LGPLv2.1 _or later_ and also has an additional exception if OpenSSL is being used. Add source comments to the checksum, and extend LICENSE if the openssl PACKAGECONFIG has been enabled. (From OE-Core rev: 9ae5e127c22bf60f22f67ca1d212e41f4906b598) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21gnutls: remove use of argp-standalone for muslRoss Burton
This was made obsoleten in 3.5.0 when crywrap was removed from the GnuTLS source tree. (From OE-Core rev: 5d655cde3c3628dd253046393addef1efbc0e1fc) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21gnutls: clean up ptest compilationRoss Burton
Don't always build the tests in do_compile, use do_compile_ptest so they are only built when needed. (From OE-Core rev: b20ad0c0d693183905dedaaa54a57ce2d50f3d29) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21gnutls: use system libtasn1Ross Burton
Instead of using an internal ASN.1 parser, re-use libtasn1 from the system by default. (From OE-Core rev: 3196be4d1f778603b9e589c34b388110ca52759f) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21gnutls: add PACKAGECONFIG options for certification compressionRoss Burton
GnuTLS has optional support for certificate compression. These are not widely enabled in other distributions and were previously disabled in standard builds, so don't enable them by default. (From OE-Core rev: f7405050e2f1061794a4ece20a30ff1ec84a5f2d) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21gnutls: add PACKAGECONFIG for DANERoss Burton
DANE (DNS-based Authentication of Named Entities) allows certificates to be bound to DNS entries. This requires unbound which is not part of oe-core. Add a PACKAGECONFIG but disable by default. (From OE-Core rev: d6506f9fc22ebd6aac87b46e5a4b36e9d773c9f4) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21wic: Add argument --hidden to default imagerLeon Anavi
Add argument --hidden to avoid MS Windows prompting to format partition after flashing to a USB stick, SD card on another media. Set Bit 0 (RequiredPartition) to mark that the partition is required for the platform to function on GUID Partition Table (GPT). The new argument simplifies setting RequiredPartition on GPT through a WKS file and the default imager plugin. Otherwise, without this feature, to achieve the same result a new imager plugin has to be implemented and set in WIC_CREATE_EXTRA_ARGS. (From OE-Core rev: 87d2dddb2e62fb63cec8b161b4a6cdb5ab4b6ad8) Signed-off-by: Leon Anavi <leon.anavi@konsulko.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21avahi: fix D-Bus introspectionEero Aaltonen
Install and package the D-Bus introspection files. (From OE-Core rev: fc5c3e326a6e947272d7272ddb95894d570414ba) Signed-off-by: Eero Aaltonen <eero.aaltonen@vaisala.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21oe-buildenv-internal: remove path from previous projectChen Qi
Util now, only paths added for current project are removed to avoid PATH growing unnecessarily. This is to handle the case of sourcing the init script into different build directories. However, if we source the init script from different projects into different build directories, the paths added by previous projects are not cleaned up. To avoid this, we record the paths added into OE_ADDED_PATHS, and remove it in the next sourcing. The OE_ADDED_PATHS variable is exported mainly for the two reasons: 1. users can clearly see it in the `env' command's output. 2. if the prefixed PATH is carried into the subprocess (e.g., a subshell), so should this OE_ADDED_PATHS variable that prefixes it. Note that the paths, "$OEROOT/scripts:$BITBAKEDIR/bin:", are added as a whole. A previous commit, "oe-buildenv-internal: Add paths to $PATH individually", made the change to treat these two paths separately, the reason was not "assuming the path to the scripts directory always is in $PATH directly before the bitbake directory". But this is exactly the effect of the codes. I see no reason why we should complicate things. (From OE-Core rev: c6218c1e0a551e7b1d4806812d7473d46d61010c) Signed-off-by: Chen Qi <Qi.Chen@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21e2fsprogs: Fix error SRCDIR when using usrmerge DISTRO_FEATURESQiu Tingting
When build e2fsprogs ptest with usrmerge DISTRO_FEATURES, in test_script and test_one scripts, value of SRCDIR has problem. SRCDIR=/usr/usr/lib/e2fsprogs/ptest/test ptest log # ptest-runner e2fsprogs START: ptest-runner 2022-12-17T11:08 BEGIN: /usr/lib/e2fsprogs/ptest ls: cannot access '/usr/usr/lib/e2fsprogs/ptest/test/[a-zA-Z]_*': No such file or directory ./test_script: line 54: /usr/usr/lib/e2fsprogs/ptest/test/test_post: No such file or directory DURATION: 0 END: /usr/lib/e2fsprogs/ptest 2022-12-17T11:08 STOP: ptest-runner TOTAL: 1 FAIL: 0 Reason In Makefile.in, SRCDIR is set by prefix and libdir. @echo "SRCDIR=${prefix}${libdir}/e2fsprogs/ptest/test" >> test_one @echo "SRCDIR=${prefix}${libdir}/e2fsprogs/ptest/test" >> test_script prefix=/usr libdir=/usr/lib (when usrmerge is set) solution Use PTEST_PATH to fix it. (From OE-Core rev: 162c4d0b1737a5a13f1304f8970408e2c9797625) Signed-off-by: Qiu Tingting <qiutt@fujitsu.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21meta: introduce KCONFIG_CONFIG_ENABLE_MENUCONFIGMing Liu
Currently, uboot do_menuconfig task is breaking when UBOOT_CONFIG is chosen rather than UBOOT_MACHINE, it simply fails with the following errors: | make: *** No rule to make target 'menuconfig'. Stio. | Command failed. | Press any key to continue... this is due to the work directory of do_menuconfig is set to ${B} but not ${B}/$config. We should distinguish two situations: 1) When there is only one config item in UBOOT_CONFIG, do_menuconfig should work just like how it works for UBOOT_MACHINE. 2) When there are multiple config items in UBOOT_CONFIG, do_menuconfig should print out some information saying it's not supported other than just failing. This patch mainly aims to fix that by introducing a extra variable KCONFIG_CONFIG_ENABLE_MENUCONFIG, it would be set to 'false' for situation 2), and when it's set to 'true', then set KCONFIG_CONFIG_ROOTDIR correctly in uboot-config.bbclass to let do_menuconfig task work. DEVTOOL_DISABLE_MENUCONFIG could be replaced by this new variable KCONFIG_CONFIG_ENABLE_MENUCONFIG. (From OE-Core rev: 2e682e7581d75e29f71ad19d2c462301e8ddb279) Signed-off-by: Ming Liu <liu.ming50@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21llvm: Enable RISCV supportKhem Raj
LLVM 16 should work well for RV32/RV64 (From OE-Core rev: 1c49a8ebbd1112435b0e8653c1e3d7d8621f1340) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21kernel-devicetree: recursively search for dtbsRandolph Sapp
Upstream's dtb directory structure has no real standard. They just tend to idle around the 2/3 directory depth. Recursively search for the dtb/dtbo files instead of assuming anything. Fixes: 04ab57d200 (kernel-devicetree: allow specification of dtb directory, 2023-05-02) (From OE-Core rev: 70f566f9427107f6505284baca305bcaabaadbc0) Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21kernel-devicetree: make shell scripts posix compliantMartin Jansa
Use the notation suggested by Martin Jansa to avoid a bashism. Also switch KERNEL_DTBVENDORED to the more common 0/1 notation instead of true/false. Fixes: 04ab57d200 (kernel-devicetree: allow specification of dtb directory, 2023-05-02) (From OE-Core rev: feba61605b718ba082ee94d2d042c2a590e880bc) Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com> Signed-off-by: Randolph Sapp <rs@ti.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21perf: add libtraceevent packageconfigMax Krummenacher
With kernel 6.4-rc1 commit 6898e60f709b ("perf build: If libtraceevent isn't present error the build") having libtraceevent is a required dependency unless building it with 'NO_LIBTRACEEVENT=1'. Older kernels did build libtraceevent as provided by the kernel sources. (Unless LIBTRACEEVENT_DYNAMIC=1 was defined, then it tried to pickup an external provided libtraceevent and printed a warning if not found.) Add a libtraceevent packageconfig which adds the dependency on libtraceevent if set, otherwise builds with NO_LIBTRACEEVENT=1. For older kernels the old behaviour of building libtraceevent from the kernel sources isn't changed. (From OE-Core rev: 1b3f167683343334b56122f1a5899244ca0c42c5) Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21perf: make pkg-config availableMax Krummenacher
Fixup the to be called pkg-config as $(CROSS_COMPILE)pkg-config doesn't exist. With kernels < 6.4 pkg-config is only used for the gtk+-2.0 integration which is disabled in the OE config. Thus the issue wasn't exposed so far. With kernel 6.4 pkg-config is additionally used for libtraceevent and libtracefs. (From OE-Core rev: 8c6391390417adb4c3ce5cf9391123960eca6b1b) Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21libtraceevent: fix qa issue reference to tmpdirMax Krummenacher
Make sure that the OE provided CFLAGS are passed to the compiler so that the -fdebug-prefix-map and -fmacro-prefix-map options are actually active. Fixes: | WARNING: libtraceevent-1.7.2-r0 do_package_qa: QA Issue: File /usr/lib/libtraceevent.a in package libtraceevent-staticdev contains reference to TMPDIR [buildpaths] | WARNING: libtraceevent-1.7.2-r0 do_package_qa: QA Issue: File /usr/lib/.debug/libtraceevent.so.1.7.2 in package libtraceevent-dbg contains reference to TMPDIR [buildpaths] (From OE-Core rev: 5fa7720d30a2420e2deef47de830b6979bb1cbaf) Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21libtraceevent: import from meta-openembeddedMax Krummenacher
Import from meta-openembedded at commit d250a0dc0 ("libtraceevent: upgrade 1.7.1 -> 1.7.2"). Starting with kernel 6.4 libtraceevent is a dependency of perf. While one can still build perf without it by opting out one would loose its functionality compared with building perf from kernels before 6.4 (From OE-Core rev: cd331996d9af69fc08675fb16fa2fceb36599036) Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21vim: upgrade 9.0.1429 -> 9.0.1527Randy MacLeod
Fixes: https://nvd.nist.gov/vuln/detail/CVE-2023-2426 caf642c25 patch 9.0.1499: using uninitialized memory with fuzzy matching (From OE-Core rev: b286d892cfb68023ca608637e269f8c01f96e3ea) Signed-off-by: Randy MacLeod <Randy.MacLeod@windriver.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21cpio: upgrade to 2.14Ross Burton
Specifically this includes the commit "Fix appending to archives bigger than 2G". Drop all submitted patches. Apply a patch from git to fix the build with clang. [ YOCTO #11674 ] (From OE-Core rev: a1a07e1794b57bd7b11f9753f3820cfdd716e577) Signed-off-by: Ross Burton <ross.burton@arm.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21qemurunner: add boot logs to do_testimage task logs in real timeMikko Rapeli
Complex boot sequences take a lot of time to reach serial console login. In our case boot involves multiple bootloaders like u-boot and grub, then hypervisors like xen, then initramfs images which do things like validating secure boot and encrypting the main rootfs. All these happen before main rootfs serial console login prompt is reached and thus many things can go wrong, including race conditions, hangs and deadlocks, and thus logging the details is important for development. This change adds the qemu serial console logs to do_testimage task logs while they are being read out. The logs are not added to bitbake output. This enables debugging and tracing the do_testimage via task log file while the boot and tests are running. (From OE-Core rev: 060f55e676b5131c09426ac42210b166473261f1) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21qemurunner: avoid leaking server_socketMikko Rapeli
close() the server_socket before qemusock replaces it. (From OE-Core rev: 048edbca20699d97c02839b2f9f82069edeb6501) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21qemurunner: support serial console login via qemu stdoutMikko Rapeli
runqemu script works with qemu machines which provide login and serial console to the qemu process stdout. Add the same support to qemurunner so that testing with testimage.bbclass is possible. Default qemu machines provide serial console boot logs and login via socket to qemu process but I don't see a reason why qemu process stdout should not be supported too since they work with runqemu as well. (From OE-Core rev: 7298bc9af3a361abb9e28347052fcd13c29f1baa) Signed-off-by: Mikko Rapeli <mikko.rapeli@linaro.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21oe-setup-build: add a tool for discovering config templates and setting up ↵Alexander Kanavin
builds This is the last (I believe) piece of the puzzle in setting up builds from nothing without having to write custom scripts or use external tools. After layers have been fetched and placed into their respective locations by oe-setup-layers, one would surely want to proceed to the actual build, and here's how: 1. Without arguments or with 'list-config-templates', the tool reads available layers from .oe-layers.json file (written out by oe-setup-layers) and prints what templates it has found, as seen below. If the following is not enough information, adding '-v' will also print conf-notes.txt for each of the templates: $ oe-setup-build Available build configuration templates (re-run with -v to see their descriptions): /srv/work/alex/poky/scripts/oe-setup-build setup-build-env -c /srv/work/alex/poky/meta-poky/conf/templates/default will create a build configuration in /srv/work/alex/build-meta-poky-default /srv/work/alex/poky/scripts/oe-setup-build setup-build-env -c /srv/work/alex/meta-alex/conf/templates/configuration-gizmo will create a build configuration in /srv/work/alex/build-meta-alex-configuration-gizmo /srv/work/alex/poky/scripts/oe-setup-build setup-build-env -c /srv/work/alex/meta-alex/conf/templates/configuration-gadget will create a build configuration in /srv/work/alex/build-meta-alex-configuration-gadget 2. Then the user picks one command of the above and runs it. This will land them in a shell ready to run bitbake: $ oe-setup-build setup-build-env -c /srv/work/alex/meta-alex/conf/templates/configuration-gizmo Running: TEMPLATECONF=/srv/work/alex/meta-alex/conf/templates/configuration-gizmo . /srv/work/alex/poky/oe-init-build-env /srv/work/alex/build-meta-alex-configuration-gizmo && /bin/bash (...standard Yocto banner omitted...) This configuration template will set up a build for the purposes of supporting gizmo. Please refer to meta-alex/README for additional details and available bitbake targets. 3. The full set of command line options is: $ oe-setup-build -h usage: oe-setup-build [-h] {list-config-templates,setup-build-env} ... A script that discovers available build configuration templates and sets up a build environment based on one of them positional arguments: {list-config-templates,setup-build-env} list-config-templates List available configuration templates setup-build-env Set up a build environment and open a shell session with it, ready to run builds. optional arguments: -h, --help show this help message and exit $ oe-setup-build list-config-templates -h usage: oe-setup-build list-config-templates [-h] [--layerlist LAYERLIST] [-v] optional arguments: -h, --help show this help message and exit --layerlist LAYERLIST Where to look for available layers (as written out by setup-layers script) (default is /srv/storage/alex/yocto/build-64-alt/.oe-layers.json). -v Print a description for each available build configuration template. $ oe-setup-build setup-build-env -h usage: oe-setup-build setup-build-env [-h] -c template_path [-b build_path] [--no-shell] optional arguments: -h, --help show this help message and exit -c template_path Use a build configuration template in template_path to set up a build environment (run this script with 'list-config-templates' to see what is available) -b build_path Set up a build directory in build_path (run this script with 'list-config-templates' to see where it would be by default) --no-shell Create a build directory but do not start a shell session with the build environment from it. 4. There's an an added hint in oe-setup-layers about how to proceed (as it is really not user-friendly to fetch the layer repos successfully and then exit without a word), and a symlink to the script from the top level layer checkout directory. 5. The selftest to check layer setup has been adjusted to run a basic check for template discovery and build setup. The revision of poky to be cloned has been bumped to 4.1, as that's the first version with a default template in a standard location. (From OE-Core rev: e15b69ae58d68bb207b908f4d68c16a645dec992) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21scripts/oe-setup-layers: write a list of layer paths into the checkout's top dirAlexander Kanavin
This is beneficial for setting up builds, as this list can be used to determine reliably where the actual layers are, and discover available configurations from them. Also adjust the selftest to check the presence of that file rather than any specific layer in a hardcoded location. Sample output (paths are written relative to the file for relocatability and ease of reading): { "layers": [ "meta-openembedded/meta-filesystems", "meta-openembedded/meta-gnome", "meta-openembedded/meta-initramfs", "meta-openembedded/meta-multimedia", "meta-openembedded/meta-networking", "meta-openembedded/meta-oe", "meta-openembedded/meta-perl", "meta-openembedded/meta-python", "meta-openembedded/meta-webserver", "meta-openembedded/meta-xfce", "poky/bitbake/lib/layerindexlib/tests/testdata/layer1", "poky/bitbake/lib/layerindexlib/tests/testdata/layer2", "poky/bitbake/lib/layerindexlib/tests/testdata/layer3", "poky/bitbake/lib/layerindexlib/tests/testdata/layer4", "poky/meta-poky", "poky/meta-selftest", "poky/meta-skeleton", "poky/meta-yocto-bsp", "poky/meta" ], "version": "1.0" } (From OE-Core rev: d6510007cbf35aae165abe0def9df130a3bd5203) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21createrepo-c: update 0.20.1 -> 0.21.1Alexander Kanavin
(From OE-Core rev: 1ef3e60a473c460ea9472122b031798401012c4b) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21libgpg-error: update 1.46 -> 1.47Alexander Kanavin
License-Update: copyright years (From OE-Core rev: 8cc8764f21ce3189adfdab604ea761cd047b7ec6) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21libgcrypt: update 1.10.1 -> 1.10.2Alexander Kanavin
(From OE-Core rev: 6a943525e07934d980ca3abe683afb1beb31d3a8) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21libatomic-ops: update 7.6.14 -> 7.8.0Alexander Kanavin
License-update: file relocated, formatting. (From OE-Core rev: 11d4fdb0c2eb049d5032e2bf5a8eedc96702e21f) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21gpgme: update 1.18.0 -> 1.20.0Alexander Kanavin
Rebase patches. (From OE-Core rev: a9f880ef34245e1baf9d07ae73adf55d597c22ab) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21cryptodev: remove unneeded patchAlexander Kanavin
With 1.13 version the needed rules are available directly upstream. This wasn't noticed in 1.12->1.13 patch rebase. I verified that installed files are exactly same with and without the patch. (From OE-Core rev: e88eae0bdc3d34a1a1d5cbf81157d3a1603cbc49) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21libva: update 2.16 -> 2.18Alexander Kanavin
(From OE-Core rev: 1b5e703b256a7a4d9fb09cc4a724525a8b423020) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21librsvf: update 2.54.5 -> 2.56.0Alexander Kanavin
Upstream no longer includes all the crates into tarballs, so use cargo_update_recipe_crates class to make a list for the crate:// fetcher. (From OE-Core rev: 36e2b6178a33f8f25dba3dfec37f239f6dab7f01) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21less: update 608 -> 633Alexander Kanavin
Drop backport. License-update: copyright years. (From OE-Core rev: a0c3edad5845eccb6db066458c42262e3d3cf30d) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21rpm: update 4.18.0 -> 4.18.1Alexander Kanavin
Drop: 0001-docs-do-not-build-manpages-requires-pandoc.patch (pandoc is now detected from $PATH) fifofix.patch (upstream fixed the issue) (From OE-Core rev: 562256dc92a16b32444b472d990005aba1d9a296) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21perl: update 5.36.0 -> 5.36.1Alexander Kanavin
Drop gcc 12 patch, as upstream rejected it, and then (presumably) fixed gcc 12 issues differently. (From OE-Core rev: 9c2616ca9b7f654ffab05dfacb166af4ddde9fad) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21perlcross: update 1.4 -> 1.4.1Alexander Kanavin
(From OE-Core rev: 5645c87e19c9a7822e8f97d152e96225e62c69d9) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21llvm: update 15.0.7 -> 16.0.3Alexander Kanavin
(From OE-Core rev: cc47c3ada10ce1eed529d24b5456151cda15593d) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21erofs-utils: update 1.5 -> 1.6Alexander Kanavin
Drop patches merged upstream. --enable-largefile is no longer necessary, as compiler options are being passed in explicitly. (From OE-Core rev: 4ab97903a9cef3e5b7d7e96bc6a52afb7e198bbb) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21elfutils: update 0.188 -> 0.189Alexander Kanavin
Drop backports, rebase musl patches. (From OE-Core rev: cd9dcef80fa6c94f8cc4330aac3a3618d03d417f) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21btrfs-tools: update 6.1.3 -> 6.3Alexander Kanavin
Drop patch, as upstream fixed the issue separately. (From OE-Core rev: 0c1ffa1bd6d068a106f08844b885d246b2360c2e) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21ovmf: update 202211 -> 202302Alexander Kanavin
(From OE-Core rev: 898606a9856574876eb70bf40d66f23583a99e96) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21ppp: upgrade 2.4.9 -> 2.5.0Alexander Kanavin
Convert the build from handcrafted makefiles to autotools; this makes all custom tweaks in the recipe unnecessary, and allows removing all patches. (From OE-Core rev: c80743ad97ba64173eff92167f36fe346adf4d80) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21glib-2.0: upgrade 2.74.6 -> 2.76.2Alexander Kanavin
Drop backports. Refactor relocate-modules.patch; upstream has implemented the same logic, but made it os x only - we can simply drop those ifdef guards: https://gitlab.gnome.org/GNOME/glib/-/commit/af83c6571e47d06468b8162dd29ad57bcf4967a8 (From OE-Core rev: be61ab467fe29b74b7bb9f2ea55afc114f6b022b) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21apmd: remove recipe and apm MACHINE_FEATUREAlexander Kanavin
APM has been obsolete for a very long time, and debian no longer packages it or carries the source tarball. (From OE-Core rev: 992c372530df0a11b6cb99c443c1d546ec16b807) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21insane.bbclass: add a RECIPE_MAINTAINER check (oe-core recipes only)Alexander Kanavin
Absent maintainer entries are as well a frequent source of friction, as they are checked only in selftest, and so aren't revealed until autobuilder runs. The selftest is retained as it also checks for obsolete entries in maintainers.inc (not possible to do in insane class). (From OE-Core rev: f79cedf360bbcb2ce2c358ee507091dccbc6c9f7) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21insane.bbclass: add a SUMMARY/HOMEPAGE check (oe-core recipes only)Alexander Kanavin
This was done in a selftest, but that is too late and creates friction in integration as errors are not seen until autobuilder fails. Bonus fix: SUMMARY check wasn't even working, as in the absence of one set in the recipe there is a default value set from bitbake.conf. I left DESCRIPTION check out for now, as many recipes don't actually have it, and it's set from SUMMARY (plus a dot) if absent. (From OE-Core rev: c9a345ad02316d160688f3878cae1cccb8fb9f00) Signed-off-by: Alexander Kanavin <alex@linutronix.de> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2023-05-21defaultsetup: Enable largefile and 64bit time_t support systemwideKhem Raj
(From OE-Core rev: 1cd0197e91d163ee930b115202a56a6402077c90) Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-27 05:32:42 +0000