| Age | Commit message (Collapse) | Author |
|---|
|
Handle IMAGE_BOOT_FILES having wildcard patterns for dtbs. This requires
that the recipe depend on the deployment of the dtbs in order for the
correct file names to be expanded.
This change also improves the parsing of the IMAGE_BOOT_FILES variable
and splits out the python functions for doing this into a separate
image-wic-utils.bbclass file.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Remove the parsing of KERNEL_DEVICETREE as by default those values will
be populated into the IMAGE_BOOT_FILES variable.
Also add a note describing why wildcard patterns work in the QB_DTB
field.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add all available dtb sources to the IMAGE_BOOT_FILES variable. For
device-tree recipe generated dtbs the files available are only known
after they files are deployed, so a wildcard pattern is used for these
files. Note that this pattern appears before the kernel device trees due
to the preference to use custom non-kernel device trees where available.
This ordering is needed so that recipes like u-boot-zynq-uenv can pick
the first device tree to select as the default.
The kernel device trees are specifically selected based on the value of
KERNEL_DEVICETREE, this avoid the duplication of kernel image type
prefixed files along side having the actual files that the kernel
builds.
Additionally remove all instances of "${MACHINE}.dtb" as they no longer
need to be specified and are incorrect due to the nesting of the files
in the `devicetree` directory.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Replace the definition of IMAGE_BOOT_FILES in machine-xilinx-board.inc
with the use of a function which automatically selects available images
that should be included. This includes the existing implementation of
`get_dtb_list` and replaces it with a function that covers all image
files including the existing default for KERNEL_IMAGETYPE(S) and
UBOOT_BINARY.
Also remove the use of `get_dtb_list` from individual machines which is
replaced by the default value.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
IMAGE_BOOT_FILES
Replaced the hard-coded devicetree files in IMAGE_BOOT_FILES with a function,
which formats the KERNEL_DEVICETREE list properly.
Signed-off-by: Franz Forstmayr <f.forstmayr@gmail.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add thud as LAYERSERIES_COMPAT
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add tune file supporting versal devices.
Xilinx is introducing Versal, an adaptive compute acceleration platform
(ACAP), built on 7nm FinFET process technology. Versal ACAPs combine
Scalar Processing Engines, Adaptable Hardware Engines, and Intelligent
Engines with leading-edge memory and interfacing technologies to deliver
powerful heterogeneous acceleration for any application. The Versal AI
Core series has five devices, offering 128 to 400 AI Engines. The series
includes dual-core Arm Cortex™-A72 application processors, dual-core Arm
Cortex-R5 real-time processors, 256KB of on-chip memory with ECC, more
than 1,900 DSP engines optimized for high-precision floating point with
low latency
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
zynqmpeg and zynqmpev devices has Mali400, overrides extended with
mali400.This patch sets preferred providers to libmali-xlnx.
Signed-off-by: Vineeth Chowdary Karumanchi <vineethchowz.chowdary@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Change the microzed board to use the device tree from the kernel. This
device tree was added in in kernel v4.10 and was pulled into the
meta-xilinx layer to resolve some usb issues in commit 8e01359125.
With all kernel recipes being at or beyond v4.10 using the kernel
source is straight forward and removes any issues caused by differences
between the in kernel and the copied version.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Prepend the 'devicetree' subdirectory in IMAGE_BOOT_FILES for machines
that use the device-tree recipe.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
With the introduction of devicetree.bbclass in oe-core/meta, remove the
implementation of device tree compilation from device-tree.bb keeping
the meta-xilinx specific information and licensing. Also consolidate the
device-tree.bb and device-tree.bbappend.
The only differences between the existing device-tree.bb implementation
and the devicetree.bbclass implementation is the device trees are
deployed in a "devicetree/" subdirectory within the deployed images
directory.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
When building pmu firmware using multiconfig setup, the binaries can be
deployed in different build directory. Provide variables to set the
binaries in the required path for QEMU.
Fix SPL dependency on pmu-firmware. Since the pmu-firmware is being built
as a part of multiconfig provide variables to fetch appropriate
pmu-firmware binaries.
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
components
The zynqmp-pmu class was being used to build standalone components (PMU)
for several devices, with the introduction of the meta-xilinx-standalone
layer and the xilinx-standalone distro, this is not necessary anymore.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add ZYNQMP_CONSOLE flag to EXTRA_OEMAKE to add support for the 2nd UART.
If ZYNQMP_CONSOLE is set to cadence or cadence0, it will use UART 0 and
if set to cadence1, it will use UART 1. The default value is set to
cadence.
Change do_configure to perform make clean. Without this change,you must
manually clean sstate before building with the new value of
ZYNQMP_CONSOLE, which is not the desired behavior.
Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
Signed-off-by: Bhargava Sreekantappa Gayathri <bhargava.sreekantappa-gayathri@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Fix the typo in the include file, it is missing require/include
Signed-off-by: Nicholas Pillitteri <njpillitteri@gmail.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
This patch adds a missing include path for generic kernel DTC
includes.
Signed-off-by: Martin Siegumfeldt <mns@gomspace.com>
Reviewed-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Update README to include the newer board support
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Update the README for building the layer
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Update README.booting.md to include SD install steps for ZynqMP. There
are small but important differences compared to Zynq.
Signed-off-by: Martin Lund <malu@gomspace.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
This recipe allows user to fetch the MALI 400 binaries from xilinx.com
manually and use it with compatible machines based on UltraScale+ for
libgles1/libgles2 and egl libraries.
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Set package arch of VCU to SOC_FAMILY. Even though VCU hwcodec is
available only in ev devices, we are enabling the package for all MPSoC
devices.
gstreamer is the application used for video pipelining. When the VCU HW
is not found, the behaviour will default to using software based
gstreamer (in case of cg and eg devices).
By making package arch common for all zynqmp devices, we can use the
same sstate-cache and RPM feeds for gstreamer components.
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
MALI 400 is available only for eg and ev devices. Set compatible string
and package arch to reflect the same.
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add appropriate SOC_VARIANT for each machine configuration. This is
required from the introduction of overrides based on SOC_VARIANT.
Available SOC_VARIANT's for UltraScale+ MPSoC:
"cg" - Zynq UltraScale+ CG Devices
"eg" - Zynq UltraScale+ EG Devices
"ev" - Zynq UltraScale+ EV Devices
Add SOC_VARIANT to zcu102 board. Default variant is EG device.
Add SOC_VARIANT to zcu104 board. Default variant is EV device.
Add SOC_VARIANT to zcu106 board. Default variant is EV device.
Available SOC_VARIANT's for zynq:
"7zs" - Zynq-7000 Single A9 Core
"7z" - Zynq-7000 Dual A9 Core
Add SOC_VARIANT to zc702 board. Default variant is 7z device.
Add SOC_VARIANT to zc706 board.Default variant is 7z device.
Add SOC_VARIANT to microzed board.Default variant is 7z device.
Add SOC_VARIANT to picozed board.Default variant is 7z device.
Add SOC_VARIANT to zedboard board.Default variant is 7z device.
Add SOC_VARIANT to zybo board.Default variant is 7z device.
Add SOC_VARIANT to qemu-zynq7 board.Default variant is 7z device.
Signed-off-by: Vineeth Chowdary Karumanchi <vineethchowz.chowdary@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
zynq-7000 devices are mainly shipped in 2 variants.
https://www.xilinx.com/products/silicon-devices/soc/zynq-7000.html#productTable
Available SOC_VARIANT's for zynq:
"7zs" - Zynq-7000 Single A9 Core
"7z" - Zynq-7000 Dual A9 Core
This will extend MACHINEOVERRIDES for each device variant as:
7zs --> zynq7zs
7z --> zynq7z
This patch sets the default value of SOC_VARIANT to 7z. This can be
overriden in machine configuration to match the intended FPGA device.
Signed-off-by: Vineeth Chowdary Karumanchi <vineethchowz.chowdary@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
UltraScale MPSoC is shipped in 3 device variants.
https://www.xilinx.com/products/silicon-devices/soc/zynq-ultrascale-mpsoc.html#productTable
Available SOC_VARIANT's for zynqmp:
"cg" - Zynq UltraScale+ CG Devices
"eg" - Zynq UltraScale+ EG Devices (MALI 400)
"ev" - Zynq UltraScale+ EV Devices (MALI 400 + VCU)
This will extend MACHINEOVERRIDES for each device variant as:
cg --> zynqmpcg
eg --> zynqmpeg
ev --> zynqmpev
This patch sets the default value of SOC_VARIANT to eg. This can be
overriden in machine configuration to match the intended FPGA device.
Signed-off-by: Vineeth Chowdary Karumanchi <vineethchowz.chowdary@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
features
This patch enables to add overrides depending on the SoC capabilities.
UltraScale+ FPGA has different variants of silicon to support different
features like MALI400, VCU. Categorically there are three variants: cg
devices, eg devices(MALI 400) and ev devices (MALI 400+ VCU)
See:
https://www.xilinx.com/products/silicon-devices/soc/zynq-ultrascale-mpsoc.html#productTable
dr devices are based for UltraScale+ RFSoC
This patch allows machineoverides to be extended as zynqmp(cg|eg|ev|dr)
and mali400/vcu (based on functionality). This helps in grouping of
settings for similar SoC
This patch also adds packages to be a part of the feed based on
SOC_FAMILY and SOC_VARIANT
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Vineeth Chowdary Karumanchi <vineethchowz.chowdary@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
The ZCU104 Evaluation Kit enables designers to jumpstart designs for
embedded vision applications such as surveillance, Advanced Driver
Assisted Systems (ADAS), machine vision, Augmented Reality (AR), drones
and medical imaging. This kit features a Zynq® UltraScale+™ MPSoC EV
device with video codec and supports many common peripherals and
interfaces for embedded vision use case. The included ZU7EV device is
equipped with a quad-core ARM® Cortex™-A53 applications processor,
dual-core Cortex-R5 real-time processor, Mali™-400 MP2 graphics
processing unit, 4KP60 capable H.264/H.265 video codec, and 16nm FinFET+
programmable logic.
This patch adds machine configuration file for ZCU104 Evaluation Kit
with required setting of board specific yocto variables needed for
compilation of bootloader, kernel and device-tree.
- linux-xlnx is the kernel provider
- u-boot-xlnx is the u-boot provider which will also generate SPL
boot.bin
- hwcodec is provided by libomxil-xlnx recipe, this will pull in
additional dependencies of VCU kernel modules, control software,
firmware binaries
Depending on the application need you may want to pass the appropriate
CMA size in bootargs or set CONFIG_CMA_SIZE_MBYTES in kernel.
While using SPL flow, you may need to provide additional hack to pass
the PMU config object. This is similar to all ZU+ boards, due to gap in
SPL flow unable to load PMU config object.
Signed-off-by: Jaewon Lee <jaewon.lee@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
The ZCU106 Evaluation Kit enables designers to jumpstart designs for
video conferencing, surveillance, Advanced Driver Assisted Systems
(ADAS) and streaming and encoding applications. This kit features a
Zynq® UltraScale+™ MPSoC EV device and supports all major peripherals
and interfaces, enabling development for a wide range of applications.
The included ZU7EV device is equipped with a quad-core ARM® Cortex™-A53
applications processor, dual-core Cortex-R5 real-time processor,
Mali™-400 MP2 graphics processing unit, 4KP60 capable H.264/H.265 video
codec, and 16nm FinFET+ programmable logic.
This patch adds machine configuration file for ZCU106 Evaluation Kit
with required setting of board specific yocto variables needed for
compilation of bootloader, kernel and device-tree.
- linux-xlnx is the kernel provider
- u-boot-xlnx is the u-boot provider which will also generate SPL boot.bin
- hwcodec is provided by libomxil-xlnx recipe, this will pull in
additional dependencies of VCU kernel modules, control software,
firmware binaries
Depending on the application need you may want to pass the appropriate
CMA size in bootargs or set CONFIG_CMA_SIZE_MBYTES in kernel.
While using SPL flow, you may need to provide additional hack to pass
the PMU config object. This is similar to all ZU+ boards, due to gap in
SPL flow unable to load PMU config object.
Signed-off-by: Devarsh Thakkar <devarsht@xilinx.com>
Tested-by: Maulik Desai <maulik.desai@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add LAYERSERIES_COMPAT for sumo release
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Due to this change 54e2729ed43f82b8cfd96395fb68e447a9b60f86, zcu102
runqemu does not depend on u-boot-spl.bin. It requires just ATF and
u-boot to be present. Hence deploying of u-boot-spl.bin is no longer
required.
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Update kc705 bitstream for 2018.1 release
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Add the wiring in u-boot-xlnx to compile kc705-microblazeel machine.
Tested-by: Jaewon Lee <jaewon.lee@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
kc705 is tested with Xilinx kernel tree and u-boot, set preferred
provider to use the vendor tree rather than upstream version
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Due to changes in 1138c5623d3e0c415d18b109ccf6c4f301c173f6, the
definiton of UBOOT_MACHINE was removed. This causes the following error
ERROR: Nothing PROVIDES 'virtual/bootloader'
u-boot-xlnx PROVIDES virtual/bootloader but was skipped: Either
UBOOT_MACHINE or UBOOT_CONFIG must be set in the kc705-microblazeel
machine configuration.
u-boot PROVIDES virtual/bootloader but was skipped: Either UBOOT_MACHINE
or UBOOT_CONFIG must be set in the kc705-microblazeel machine
configuration.
u-boot-xlnx-dev PROVIDES virtual/bootloader but was skipped: Either
UBOOT_MACHINE or UBOOT_CONFIG must be set in the kc705-microblazeel
machine configuration.
This is a requried setting, set it to microblaze-generic_config
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
U-Boot is now able to boot to ARM Trusted Firmware (ATF). The boot
flow is SPL(EL3) loads ATF and full u-boot and jump to ATF(EL3) which
pass control to full u-boot(EL2).
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
A race issue can be induced by do_zynq_platform_init() being fired
before do_unpack(), resulting in
| DEBUG: Executing shell function do_zynq_platform_init
| cp: cannot create regular file '.../git/board/xilinx/zynq/': No such file or directory
| WARNING: exit code 1 from a shell command.
Mitigate issue by adding dependency to completion of do_unpack task
for custom do_zynq_platform_init task. Also update comment on previous
line to match the actions on next.
Signed-off-by: Niko Mauno <niko.mauno@vaisala.com>
Reviewed-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
software libraries for VCU
Add new recipes for the following:
vcu-firmware_git.bb: Add a new recipe to fetch the required firmware
binaries for VCU
kernel-module-vcu_git.bb: Add new recipe for out-of-tree kernel module
required for VCU decoder, encoder. This is applicable to MPSoC EV
devices which support Video Codec Unit
libvcu-xlnx_git.bb: Add a new recipe for control software libraries,
test applications and headers for VCU
libomxil-xlnx_git.bb: Add VCU hwcodec, this contain the OpenMAX
libraries, test applications and headers for VCU
Signed-off-by: Devarsh Thakkar <devarsht@xilinx.com>
Signed-off-by: Jeegar Patel <jeegar.patel@xilinx.com>
Tested-by: Maulik Desai <maulik.desai@xilinx.com>
Acked-by: Varunkumar Allagadapa <varunkum@xilinx.com>
Reviewed-by: Bhargava Sreekantappa Gayathri <bhargava.sreekantappa-gayathri@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
This patch updates xilinx drm driver name to "xlnx"
Signed-off-by: Varunkumar Allagadapa <varunkum@xilinx.com>
Signed-off-by: Bhargava Sreekantappa Gayathri<bhargava.sreekantappa-gayathri@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
This patch will update Mali kernel driver to r8p0-01rel0.
Signed-off-by: Madhurkiran Harikrishnan <madhurki@xilinx.com>
Tested-by: Jaewon Lee <jaewon.lee@xilinx.com>
Reviewed-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
There are instances when SPL can be completely disabled, in such cases
do_deploy will error out complaining u-boot-spl.bin not found. This
patch fixes the issue by deploying u-boot-spl.bin only if it is present
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Use ATF and u-boot.elf while booting using QEMU instead of
u-boot-spl.bin. The ATF code is fixed not to fail while looking for
FSBL. Also adopt to using pmu-firmware-${MACHINE} name change
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Update to 2018.1 pmu firmware
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Upgrade to major release 3.0.0
- License changes: Added Embedded brains, but license type stayed
the same.
- Newlib dropped support for Kernighan & Ritchie C
- We can avoid building using full gcc and use gcc-initial instead.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
oe-core has upgraded binutils to v2.30, which caused some of our patches
to fail, rebase these along with other minimal changes to avoid these
errors and provide compatibility with latest oe-core.
Signed-off-by: Alejandro Enedino Hernandez Samaniego <alejandr@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Update the arm-trusted-firmware, u-boot-xlnx, linux-xlnx,
qemu-xilinx and qemu-devicetrees recipes for 2018.1 release
Tested-by: Jaewon Lee <jaewon.lee@xilinx.com>
Acked-by: Bhargava Sreekantappa Gayathri <bhargava.sreekantappa-gayathri@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Remove 2017.3 based component recipes
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
|
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
|
|
Update the local patch for the shadow ident fix with the patch that was
accepted upstream. This patch is not in a current GCC release yet, but
will be available in v8.x when released.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
|
Nathan Rossi
Franz Forstmayr
Manjukumar Matha
Vineeth Chowdary Karumanchi
Alejandro Enedino Hernandez Samaniego
Jaewon Lee
Nicholas Pillitteri
Martin Siegumfeldt
Martin Lund
Devarsh Thakkar
Niko Mauno
Devarsh Thakkar
Varunkumar Allagadapa
Madhurkiran Harikrishnan