Age | Commit message (Collapse) | Author |
|
Updated the value(s) for:
K3_IMAGE_GEN_SRCREV
TI_LINUX_FW_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
In addition to releasing the signed versions of the bl31.bin and
bl32.bin files, also release the unsigned original versions.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
K3_IMAGE_GEN_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Bump source revision. Changelog from source:
- Cleanup the device initialization routine for all platforms
- Add a power safeguard for multicore initialization
- Enable active power management for AM62 devices
Signed-off-by: Randolph Sapp <rs@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
IMX390 is a 2MP FPDLink-III raw camera. This sensor was originally
targeted for J7-based devices, but AM62A can re-use the existing
overlays. Both the CM and RCM type of modules are supported.
As AM62A only has one CSI-RX port, we only use 4 out of the 8 total
FPDLink ports on the fusion board.
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
AM68 Starter Kit is a low cost, small form factor board designed for
TI's AM68/J721S2 SoC[1] which is optimized to provide best in class performance
for industrial applications. Add DTB entry for the same.
AM68 SK features camera support with MIPI(OV5640) and RPi(IMX219) connectors.
Add DTBO for the same. Also, add DTBO entry for the DDR memory carveout.
[1]:http://www.ti.com/lit/zip/spruj28
Signed-off-by: Sinthu Raja <sinthu.raja@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Lets add the basic AM62Q HS-SE configuration.
- Add configurations.
- Add ti-sci-firmware overrides.
- Add u-boot overrides.
- Add optee overrides.
- Add ti-rtos-firmware overrides.
Signed-off-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Lower the log level for am62axx platform
commit 27641e1f2d7f ("optee-os: Lower log level for AM62x")
changes the log level for am62xx platforms.
This patch is to extend the same for am62axx
Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Reported-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Update library to 0.5.2 as it adds support for AM62A
SoC.
Co-Authored-By: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Acked-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Add the following overlay files on AM62A SK:
1. Fusion board (For FPDLink-III cameras)
2. OV2312 FPDLink camera module
3. IMX219 RPi-compatible camera module
Signed-off-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
optee-os was updated to 3.19 tag but the others were still outdated.
Updates other optee components to 3.19 tag
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
In order to support fitImage image type, kernel-fitimage class is needed.
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
(cherry picked from kirkstone/master commit 48b22e8266ba0358b5b7319faa75ad731a350db7)
Signed-off-by: Denys Dmytriyenko <denys@konsulko.com>
Tested-by: Jose Quaresma <jose.quaresma@foundries.io>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
While removing SOFTWARE_PRNG support
commit:98506a4a07363a1b57012ccfaee263f47e5b46c4,
accidently removed the changes applied
by commit:27641e1f2d7f6696fd7bbd8f24fcac20766b6234
(optee-os: Lower log level for AM62x).
Reverting those changes back
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
K3_IMAGE_GEN_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
PV
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
PV
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Lets add the basic AM62Axx-evm configuration.
- Add configurations.
- Add firmware overrides.
- Add u-boot overrides.
- Add tifs-lpm-stub.
- Add cnm-wave-fw.
Signed-off-by: Sai Sree Kartheek Adivi <s-adivi@ti.com>
Signed-off-by: Paresh Bhagat <p-bhagat@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Updated the value(s) for:
TI_LINUX_FW_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
K3_IMAGE_GEN_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Add the overlay files, over AM625 SK, for the following:
1. Technexion OV5640 Camera
2. Enhanced Capture (ECAP)
3. HDMI Audio Output
4. MCAN Transceiver
5. Microtips OLDI Panel
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
With a recent patch to the TI kernel that includes debug symbols,
the vmlinux.gz file grew in size that impacted the testing.
This file is not needed to be in the final image so remove it
from the list.
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Correctly handle parsing when KERNEL_DEVICETREE is not set.
Signed-off-by: Zachary Booth <zachary.booth@garmin.com>
Signed-off-by: Joshua Watt <Joshua.Watt@garmin.com>
Signed-off-by: Joshua Watt <JPEWhacker@gmail.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
K3_IMAGE_GEN_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Update the SRCREV to the commit when trng support was
added in upstream OP-TEE for am62x platform to access rng.
Also, enable trng support as trng support is added now in OP-TEE
Signed-off-by: Kamlesh Gurudasani <kamlesh@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Ryan Eatmon <reatmon@ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
TI_LINUX_FW_SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|
|
Updated the value(s) for:
SRCREV
Signed-off-by: LCPD Automation Script <lcpdbld@list.ti.com>
|