Age | Commit message (Collapse) | Author |
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
Signed-off-by: Hugo Hromic <hhromic@gmail.com>
|
|
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Currently, building linux-raspberrypi with "devtool build" breaks
because ${B}.config doesn't yet exist when do_configure_prepend runs.
Fix this by taking some logic from kernel.bbclass do_configure to populate
${B}.config before do_configure_prepend.
The full explanation for why this is necessary is fairly complex:
- In devtool builds, externalsrc.bbclass gets inherited and sets a list of
SRCTREECOVEREDTASKS, which don't get run because they affect the source tree
and, when using devtool, we want the developer's changes to be the single
source of truth. kernel-yocto.bbclass adds do_kernel_configme to
SRCTREECOVEREDTASKS, so it doesn't run in a devtool build., In a normal
non-devtool build, do_kernel_configme creates ${B}.config.
- Normally (e.g. in linux-yocto), it would be OK that do_kernel_configme
doesn't run, because the first few lines of do_configure in kernel.bbclass
populate ${B}.config from either ${S}.config (if it exists) for custom
developer changes, or otherwise from ${WORDIR}/defconfig.
- In linux-raspberrypi, we add do_configure_prepend, which tweaks
${B}.config. Since this runs *before* the kernel.bbclass do_configure,
${B}.config doesn't yet exist and we hit an error. Thus we need to move
the logic from do_configure up to before our do_configure_prepend. Because
we are copying only a portion of do_configure and not the whole thing,
there is no clean way to do it using OE functionality, so we just
copy-and-paste.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
|
|
This command is done (with more correct flags) in kernel.bbclass's
kernel_do_configure. Since we inherit that and prepend to it, we don't
need to run it ourselves, as we end up just running it twice.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
Currently, we are installing the rpi custom txt and fw files whenever
the meta-raspberrypi layer is included in bblayers.conf. This breaks
other machines that need to use the bcm43430 drivers but with alternate
txt or fw files.
Install these files only when "rpi" is in MACHINEOVERRIDES.
Signed-off-by: Martin Kelly <mkelly@xevo.com>
|
|
The patch to add dtbo rules to the arm64 Makefile is no longer needed.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
Use standard /lib variable name and avoid
QA errors when usermerge DISTRO_FEATURE is enabled.
Signed-off-by: Michael Gloff <mgloff@hotmail.com>
|
|
Use standard /lib variable name and avoid
QA errors when usermerge DISTRO_FEATURE is enabled.
Signed-off-by: Michael Gloff <mgloff@hotmail.com>
|
|
Framebuffer support may be required for some monitors and applications.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
There is no reason to continue supporting pre-4.8 series kernels so we can move
the setting of LOADADDR to the common inc file.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
There is no need to have 2 separate inc files any more and the existing code has
several duplications.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
The code to determine if we need to depend on lzop-native will fail as the local
defconfig file no longer exists.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
The only remaining function in linux-raspberrypi-base was split_overlays() which
is used in the sdcard_image-rpi class. So we can move this function over and
drop the now-empty linux-raspberrypi-base class.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
* The kerneltype variable is not used anywhere after being set.
* The manipulation of KERNEL_DEVICETREE is effectively a no-op, we read the
current value in get_dts() and store this back into the same variable.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
The version of this firmware provided by linux-firmware is 7.45.41.26. This
version seems to have connectivity issues when bonding interfaces. Raspbian
included an updated version (7.45.41.46) which tested, proved to fix this
problem (see https://github.com/resin-os/meta-resin/issues/812).
The version Raspbian is providing is not yet in linux-firmware as they have it
directly from Cypress (see https://github.com/RPi-Distro/repo/issues/88).
Besides the issue described above, it fixes various other issues including a
broadpwn fix.
Hopefully this version, or a newer one, will end up in upstream soon. In order
to catch when that happens and stop overwriting this firmware, a check is added
in the racipe based on the md5sum of the current shipped firmware.
In terms of ditribution license, we got an informal one in the github thread
mentioned above.
Signed-off-by: Andrei Gherzan <andrei@gherzan.com>
|
|
OE currently builds dtb files with its own custom targets by
specifying each dtb file as makefile target, this creates bad
dtb for rpi64 bit. This patch calles 'make dtbs' at the end
which regenerates the correct dtb files
This makes the vc4 initialize properly on rpi64
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
This comes from drbd-utils in meta-oe
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by Zdzisław Krajewski <zdzichucb@gmail.com>
|
|
In tree configurations are now used to build the kernel and
it is possible to extend the config via bbappend and cfg fragments
Fix issue 14
Signed-off-by: Andrea Ghittino <aghittino@gmail.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
* bitbake is using re.match, so raspberrypi actually matches with anything
^raspberrypi.* which currently works, but it will also match with hypothetical
raspberrypi-is-no-more-this-is-banana-now MACHINE which isn't intended by
this COMPATIBLE_MACHINE.
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
|
|
Linux v4.12 is now released.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
This should avoid network traffic to resolve ${AUTOREV} unless this
recipe is explicitly selected as the preferred provider of
virtual/kernel.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
This recipe is now uniquely named instead of just being another version
of linux-raspberrypi.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
linux-raspberrypi: Switch dev recipe to 4.11 branch
|
|
Make CMDLINE overridable from outside
|
|
currently there is no way to override the default CMDLINE,
this variable needs to be set only if the developer didn't set it already from
another layer.
Signed-off-by: Gianfranco Costamagna <gianfranco.costamagna@abinsula.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
The rpi-4.4.y branch has been unmaintained for a couple of months now.
Let's drop it before branching for pyro.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
bring CMA > 256M changes
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Signed-off-by: Andrei Gherzan <andrei@gherzan.ro>
|
|
This patch hasn't yet been applied to the 4.10.y branch of
linux-raspberrypi.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
This makes the linux-raspberrypi_dev recipe more flexible by allowing
the kernel branch to be overridden in local.conf.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
The development branches of linux-raspberrypi are rebased frequently. To
avoid fetch failures caused by out-of-date git hashes we need to use
AUTOREV.
LINUX_VERSION may need to be overridden in local.conf to match the
upstream version.
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
Signed-off-by: Paul Barker <pbarker@toganlabs.com>
|
|
drop upstreamed patch
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|
|
Currently the firmware is installed but kernel fails to load it
due this .txt file missing in the firmware directory and it ends
up with wifi/bluetooth i/f not being initialized. The error is
also in dmesg
[ 3.120991] usbcore: registered new interface driver brcmfmac
[ 3.148240] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43430-sdio.txt failed with error -2
After applying this patch now ifconfig -a can list wlan0 interface
successfully.
Signed-off-by: Khem Raj <raj.khem@gmail.com>
|