Age | Commit message (Collapse) | Author |
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
In many recipes we have been using $MACHINE to add customization. As we are
about to add more boards based on similar SoC, we need to use $SOC_FAMILY as
override instead of $MACHINE.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
In order to support more apq8064 based boards, let's split the ifc6410 machine
configuration file and create apq8064.inc, which is meant to contain variables
common to all 8064 based machines.
Later on, we will add support for SOC_FAMILY as well. This commit should be a
no-op.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
In order to support more apq8016 based boards, let's split the dragonboard 410c
machine configuration file and create apq8064.inc, which is meant to contain
variables common to all 8016 based machines.
Later on, we will add support for SOC_FAMILY as well. This commit should be a
no-op.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
|
|
|
|
efi had been added by mistake initially, and should not have been there.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
instead of in the kernel recipe.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Bjorn Andersson (1):
wcn36xx: Implement print_reg indication
Todor Tomov (1):
camss: Add format field handling in CSIPHY and CSID
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
* 8016
* eMMC HS mode
* SD UHS
* CSI2 support
* GPS
* backport remoteproc/wcn/audio driver
* 8064
* SD 600 eval
* HDMI audio with DSP
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
* wncss-start is the new method to startup WCN core on QCOM SoC with integrated
WCN.
* wcnss-config should be disabled at boot, since it's triggerd by udev
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
* gnss-gpsd provides integration between QCOM GNSS (GPS) and GPSD, so that the
QCOM GPS is automatically registered into a running instance of GPSd
* qdsp-config provides service to start-up the QDSP where the GPS stack is
running, so GPS is enabled only when DSP is started
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Make sure that qrtr service is started first.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Bluez5 provides a tool called btmgmt that can be used to set/reset BT MAC
address. On DragonBoard 410c, there is no MAC address stored on the board, so we
will use this tool to set the BT MAC address at run time.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
|
|
|
|
prefix variable is set in makefile, but also in the environment by OE. Until
krogoth make was always called with -e, so the variable was set based on the
environment. However since OE core commit
aeb653861a0ec39ea7a014c0622980edcbf653fa, -e has been removed, so we need to set
prefix in the recipe to override the value from the Makefile.
It is not doing anything harmful on jethro, so let's apply this change on all
branches.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
|
|
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
the DSP/modem firmware are provided inside the NON-HLOS blob file, for
simplicity let's extract them and copy them into the filesystem.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
gpsd recipe in meta-oe is designed to have 'machine' specific dependencies
through gpsd-machine-conf recipe. It is a blank recipe by default, that can be
customized per machine.
In this recipe we customize it for dragonboard-410c and we pull in the right
dependencies needed for gpsd to work with the on board GPS, whose stack is
mostly running on the DSP.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
to include GPS related drivers.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Some users need to be able to 'fork' our kernel, so let's make that possible to
do that in .bbappend.
For example:
$ cat meta-foo/recipes-kernel/linux/linux-linaro-qcomlt_%.bbappend
SRCREV="abcdefg"
SRCBRANCH="somebranc-v1.0"
LINUX_LINARO_QCOM_GIT="git://github.com/myproject/qcomlinux.git;protocol=https"
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
|
|
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
|
|
|
|
* change PV to 1.11
* instead of using git commit id in SRCREV, switch to using the tags, that will
make maintaining the recipe simpler.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
|
|
|
|
With the fix for possible truncated MAC addresses.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
This reverts commit 4623825e7579a9d615a727be7f278b7fcc78c6e3.
the corresponding libdrm patch was merged upstream in 2.4.68.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
alsa-lib: fix patch
|
|
Upstream has added support for another hardware platform so this patch needs a
small adjustment to continue to apply.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
|
|
|
|
Since we share the same kernel for the Debian/Ubuntu and OE builds, let's align
the version string as well.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
* based on 4.4.8
* fix for SoftAP
* SPIDEV=m
* Initial support for DB600c
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|
|
this package contains WCN related config files (WLAN/BT) which are needed in all
images intended to run on dragonboard-410c.
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
|