| Age | Commit message (Collapse) | Author |
|---|
|
task-core-tools-profile.bbappend
task-core-tools.bbappend was split into three, one of which is
profile. Rename accordingly.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, emenlow,
fishriver, fri2, jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The new emgd-driver-bin_1.10 recipe no longer requires manually
extracting and installing emgd binaries, so remove the section that
deals with that.
It does require a new LICENSE_FLAGS_WHITELIST entry in local.conf, so
add instructions detailing that.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
fri2 specifies a preferred version of 1.8 for emgd, but there's really
no reason to do that at this point - it should be able to use the new
1.10 version.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The SRCREV update is required for the cfg/efi-ext as well as patches
to the standard/* branches to support EFI booting.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Note that the vesafb will only be used when booting via legacy PCBIOS.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
The fri2 can boot via EFI or legacy PCBIOS. Add support for EFI.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Enable both legacy pcbios and efi booting for live images using the
new bootimg and grub-efi code.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Include the firmware package for the iwlwifi card for task-base based images
using the MACHINE_EXTRA_RRECOMMENDS variable. This will exclude the firmware
from being installed in core-image-minimal, but it doesn't have the tooling
required to connect over wifi anyway.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Add firmware required by the Intel Centrino Adnanced-N 6205 mini-pcie card.
The content is already available in the linux-firmware repository, this patch
just adds the meta-data to include the right files and define a package.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
The current PortOrder value assumes LVDS. Change the value to first try the
primary SDVO output, then the secondary SDVO, and fallback to LVDS if neither
are present.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
The FRI2 has an optional serial expansion board. Enable the use of this
as a console for both syslinux and the OS.
Note: while the settings all appear to be correct, the serial port is
not working on my test device in syslinux or the getty. The
kernel messages do make their way to the serial port after PCI
initialization.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, emenlow,
fishriver, fri2, jasperforest, sugarbay, and romley.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Based on community input, it might be more user-friendly to have some
basic information about submitting patches in the BSP README itself.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Add a new 'Dependencies' section listing all the layer dependencies
for each BSP.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
metadata in /common is now pulled in by the meta-intel layer, so
remove it here.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The affected BSPs now need to access common metadata in locations off
of the top level of meta-intel, so need to add meta-intel itself to
their layer configuration. This updates the READMEs for those BSPs to
mention that.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
remove the open-coded machine settings.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
open-coded machine settings.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
These are now deprecated (in favor of just virtual/xserver), so remove
them.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, emenlow,
fishriver, fri2, jasperforest, sugarbay, and romley.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The fri2 linux-yocto-rt .bbappend is missing settings needed for use
with fri2-noemgd - this adds them.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
In the instructions for manually extracting the binaries from the EMGD
Linux tarball, an additional step for removing the emgd_drv_video
shared library is necessary; this adds it for fri2.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Set boot params to get a vesafb 1024x768 graphics mode and can see the
splash screen.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Set boot params to get a vesafb 1024x768 graphics mode and can see the
splash screen.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, emenlow,
fishriver, fri2, jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update fri2 and fri2-noemgd to reflect the new xserver-xorg naming.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update README.sources to reflect final Yocto tarball location for
edison.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, emenlow,
fishriver, fri2, jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, fishriver, fri2,
jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, fishriver, fri2,
jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
grub2 is now the default, so explicit preferred entries are
unnecessary. It also needs to be installed in the rootfs, so we need
to add it as a dependency.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, fishriver, fri2,
jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, fishriver, fri2,
jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, fishriver, fri2,
jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update the meta-fri2 README to reflect the addtion of the EMGD
capabilities and new machine.
Changes were also made to reflect the new image names and a couple
other minor cleanups.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Add common/recipes-graphics so fri2 can pick up the EMGD bits in
emgd-driver-bin.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This patch essentially adds a new EMGD-capable 'fri2' machine to
meta-fri2.
The current version with vesa graphics will become fri2-noemgd; fri2
will become the version with EMGD graphics. This patch does the
fri2->fri2-noemgd renaming and adds the new files for fri2, and
updates the necessary .bbappends to support both fri2 and fri2-noemgd.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for fishriver, fri2,
jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Change PREFERRED_VERSION_linux-yocto to a form that will pick up the
new numbering scheme.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update 3.0 kernel SRCREVs for fishriver, fri2, jasperforest, sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
As the all the BSPs use the same BSP branch and meta commit ID as the base
recipe, there is no need specify the KBRANCH and SRCREVs. Not doing so
greatly simplifies maintenance. Leaving the syntax in place, but commented
out, serves as documentation should the need arise to use a different BSP
branch or meta commit ID.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Allow users or layers to override PREFERRED_PROVIDER_virtual/kernel.
This is required to use the linux-yocto-rt kernel, for example.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
All the BSPs build out of the preempt-rt/base branch (rather than a
preempt-rt/$MACHINE branch), so separate KMACHINE and KBRANCH assignments are
required for each BSP.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Make sure the 3g and wifi bits get added.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This layer provides support for E6XX + EG20T Intel systems.
Currently it supports only vesa graphics, which will be upgraded
shortly.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
Tom Zanussi
Darren Hart