| Age | Commit message (Collapse) | Author |
|---|
|
Add the linux-yocto-rt_3.8.bbappend for every BSP supporting RT.
Do not update BSPs maintained by ISG.
Built, booted, and sniff tested with:
$ cyclictest -p 90 -D 10m -t
on all platforms. All boot and complete the test without abnormal
outliers with the following exceptions:
o sys940x generated a panic, reported to rt-user. Possibly hw related.
o fri2 fails to boot, hanging at "i8042: No controller found"
These need additional investigation, but shouldn't delay the merge of
the recipes themselves.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
And specify the LINUX_VERSION corresponding to the kernel branch commits.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Provide the crownbay BSP specific extension for the linux-yocto_3.8
recipe from the oecore layer. This configures the right git branches of
the kernel repository for the crownbay BSP.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Provide the crownbay BSP specific extension for the linux-yocto-dev
recipe from the oecore layer. This configures the right git branches of
the kernel repository for the crownbay BSP.
This commit is addressing this bug:
[YOCTO #3931]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Using AUTOREV turns out to cause problems with unreproducible
autobuilder builds and unwanted network access. This patch removes
kernel AUTOREVs and locks down SRCREVs and LINUX_VERSIONs.
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
|
|
Move from 1.14 version to 1.16 version of the emgd driver for
graphics support.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
clean up unused variable.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This change avoids addition of emgd source code in the noemgd bsp kernels.
This configures the crownbay BSP kernel with EMGD graphics driver
and crownbay-noemgd BSP kernel with just the VESA graphics driver.
The VESA FB support is kept for both BSPs for boot time splash screen
support.
This addresses the bug/feature request:
[YOCTO #2268]
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Use ${KMETA} variable instead of using the branch name "meta" directly.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
To ease development on unreleased BSPs, let the kernel SRCREV float.
This avoids constantly having to update the SRCREVs manually, and
assures we won't get into a situation where LINUX_VERSION doesn't
match the version set by the kernel recipe.
We'll lock down the kernel SRCREVs and set the matching LINUX_VERSION
when we do releases, but in the meantime, we can use AUTOREV.
Note that individual BSPs are always free to override this maintain
their own SRCREVs if they want to.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update all the linux-yocto .bbappends with the latest kernel SRCREVs
and add explicit LINUX_VERSIONs for the 1.3 release, to prevent a
mismatch between the kernel version actually used in the machine
branch vs the version the recipe uses for the kernel image, which can
change with stable updates.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Keeping up2date with the latest HEADs of the branches
from kernel v3.4 repository
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
There's no need to support linux-yocto-3.0 for crownbay any more, so
remove the 3.0 bbappends.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
SMP support is now configured in the kernel branch, remove it from
recipe-space.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Add the -rt version of linux-yocto-3.4.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
KBRANCH_crownbay is set to standard/default/crownbay, which isn't even
a 3.4 branch.
Set it to standard/crownbay, which is.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Add emgd branch info in git src_uri
At build time, the emgd-1.14 branch is merged with the crownbay bsp
kernel source branch to get emgd kernel driver's support.
Reference it in the src_uri, and its commit-id to be used, so that
any changes in the emgd branch will not affect build unknowingly.
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
Tested-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
To pick up most recent changes, including the matching kernel changes
for the perf-scripting/perf-tui features.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
linux-yocto-2.6.37.bb was removed from oe-core, so remove the
corresponding .bbappend from meta-crownbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.2 kernel SRCREVS for crownbay, emenlow,
fishriver, jasperforest, sugarbay, and chiefriver.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The 3.0 based boards are lazy compared to our new modern ones.
Without this patch, the linux-yocto-3.0 kernel do_patch() task would
fail with:
/srv/home/pokybuild/yocto-autobuilder/yocto-slave/cedartrail/build/build/tmp/sysroots/x86_64-linux/usr/bin/updateme:
line 434: yocto/standard/cedartrail-standard.scc: No such file or
directory
Setting the KBRANCH explicitly avoids this issue. This brings the
following recipes inline with the fri2 and sys940x BSPs.
Fix proposed by Bruce Ashfield.
Testing: Built linux-yocto_3.0 for all machines involved, including the
nopvr, noemgd variants. All built linux-yocto_3.0 successfully.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
CC: Tom Zanussi <tom.zanussi@intel.com>
CC: Bruce Ashfield <bruce.ashfield@windriver.com>
CC: Kishore Bodke <kishore.k.bodke@intel.com>
|
|
Update linux-yocto_3.2 kernel SRCREVS for crownbay, emenlow,
fishriver, jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
SMP support is now configured in the kernel branch, remove it from
recipe-space.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Switch crownbay and crownbay-noemgd to the 3.2 kernel.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, emenlow,
fishriver, fri2, jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, emenlow,
fishriver, fri2, jasperforest, sugarbay, and romley.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The linux-2.6.34 recipe was removed, so the .append needs to be
removed as well.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, emenlow,
fishriver, fri2, jasperforest, sugarbay, and romley.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
The crownbay linux-yocto-rt .bbappend is missing settings needed for use
with crownbay - this adds them.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
commit 061f3187e8cbec70d5970928b6e8252cb0958f4a (meta-intel: move
emgd-driver-bin_1.8 to common) somehow mistakenly removed the
unrelated linux-yocto-rt_3.0.bbappend from meta-crownbay. This adds
it back.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, emenlow,
fishriver, fri2, jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, emenlow,
fishriver, fri2, jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, fishriver, fri2,
jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, fishriver, fri2,
jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, fishriver, fri2,
jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, fishriver, fri2,
jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Update linux-yocto_3.0 kernel SRCREVS for crownbay, fishriver, fri2,
jasperforest, and sugarbay.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
emgd-driver-bin will be shared by multiple BSPs, crownbay and fri2 to
start with, so move them into /common.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Switch crownbay and crownbay-noemgd to the 3.0 kernel, lock it down,
and update kernel SRCREVs.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
As the all the BSPs use the same BSP branch and meta commit ID as the base
recipe, there is no need specify the KBRANCH and SRCREVs. Not doing so
greatly simplifies maintenance. Leaving the syntax in place, but commented
out, serves as documentation should the need arise to use a different BSP
branch or meta commit ID.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
All the BSPs build out of the preempt-rt/base branch (rather than a
preempt-rt/$MACHINE branch), so separate KMACHINE and KBRANCH assignments are
required for each BSP.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
|
|
The linux-yocto recipes have been renamed to include explicit
version numbers. The meta-intel bbappends must be updated to
follow the new naming convention.
As a consequence of the recipe renames any SRCREV specificiations
that were part of a machine.conf have been moved to the corresponding
bbappend file. This allows the 2.6.34 and 2.6.37 SRCREVs to co-exist.
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Minor whitespace cleanup.
Remove inadvertant? linux-libc-headers provider change.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
|
|
My previous commit used a self referencing immediate expansion assignment using.
This causes a circular reference and build failure, particularly when more than
one layer is configured in.
Use the _prepend mechanism in conjunction with the immediate expansion
assignment operator to accomplish a similar thing without the self referencing.
Note: This patch is dependent on changes to oe-core, specifically:
http://lists.linuxtogo.org/pipermail/openembedded-core/2011-May/003145.html
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Phill Blundell <pb@pbcl.net>
Cc: Koen Kooi <koen@dominion.thruhere.net>
|
|
This patch fixes Yocto BUG #1015. It adds support for SMP on the crownbay
architecture from the meta-intel branch.
Signed-off-by: Marc Ferland <ferlandm@sonatest.com>
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
bbappend
crownbay-noemgd also needs a COMPATIBLE_MACHINE entry in linux-yocto.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
Clobbering FILESEXTRAPATHS prevents multiple bbappend files providing file://
SRC_URIs. Extend the variable in each meta-* layer instead.
Build tested with linux-yocto on n450 and crownbay and linux-yocto-stable on
crownbay. Build tested linux-yocto on n450 with a third layer adding a config
fragment.
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Acked-by: Tom Zanussi <tom.zanussi@intel.com>
|
|
This adds the code necessary to move meta-crownbay over to
linux-yocto. A follow-on patch will actually do the switchover once
the kernel srcrevs are known.
Signed-off-by: Tom Zanussi <tom.zanussi@intel.com>
|
Darren Hart
Nitin A Kamble
Tom Zanussi
Tom Zanussi
Bruce Ashfield
Marc Ferland