diff options
Diffstat (limited to 'meta-crystalforest/README')
-rw-r--r-- | meta-crystalforest/README | 191 |
1 files changed, 0 insertions, 191 deletions
diff --git a/meta-crystalforest/README b/meta-crystalforest/README deleted file mode 100644 index 210df563..00000000 --- a/meta-crystalforest/README +++ /dev/null @@ -1,191 +0,0 @@ -This README file contains information on building the meta-crystalforest -BSP layer, and booting the images contained in the /binary directory. -Please see the corresponding sections below for details. - -The 'Crystal Forest' platform consists of two versions. -1. GLADDEN -2. SERVER - -The Gladden Platform consists of Intel Xeon E3-1125C/E3-1105C Processor, -plus the Intel Communication Chipset 89xx for Smaller Form Factor -Communication Infrastructure. -(Gladden + Cave Creek) also known as CrystalForest-Gladden - -The Server Platform consists of Intel Xeon E5-2600 and E5-2400 Processors, -plus the Intel Communication Chipset 89xx for Large-Scale Communications -Infrastructure. -(Ivy Bridge-EP/EN + Coleto Creek) also known as HighlandForest -(Sandy Bridge-EP/EN + Cave Creek) also known as CrystalForest-Server - -Both Platforms use Matrox graphics Card. - -Further information about the Crystal Forest Gladden platform supported -by this BSP can be found here: - - http://www.intel.com/p/en_US/embedded/hwsw/hardware/xeon-core-pentium-celeron-89xx/overview - -Further information about the Crystal Forest server platform supported -by this BSP can be found here: - - http://www.intel.com/p/en_US/embedded/hwsw/hardware/xeon-e5-89xx/overview - -Information on all IntelĀ® embedded platforms can be found here: - - http://www.intel.com/p/en_US/embedded/hwsw/hardware - - -Yocto Project Compatible -======================== - -This BSP is compatible with the Yocto Project as per the requirements -listed here: - - https://www.yoctoproject.org/webform/yocto-project-compatible-registration - -Dependencies -============ - -This layer depends on: - - URI: git://git.openembedded.org/bitbake - branch: master - - URI: git://git.openembedded.org/openembedded-core - layers: meta - branch: master - - URI: git://git.yoctoproject.org/meta-intel - layers: intel - branch: master - - -Patches -======= - -Please submit any patches against this BSP to the meta-intel mailing -list (meta-intel@yoctoproject.org) and cc: the maintainer: - -Maintainer: Chan Wei Sern <wei.sern.chan@intel.com> - -Please see the meta-intel/MAINTAINERS file for more details. - - -Table of Contents -================= - - I. Building the meta-crystalforest BSP layer - II. Booting the images in /binary -III. Device Notes - a. Boot Loader - b. I/O drivers -IV. Enabling Intel DPDK and QuickAssist Technology - -I. Building the meta-crystalforest BSP layer -======================================= - -In order to build an image with BSP support for a given release, you -need to download the corresponding BSP tarball from the 'Board Support -Package (BSP) Downloads' page of the Yocto Project website. - -Having done that, and assuming you extracted the BSP tarball contents -at the top-level of your yocto build tree, you can build a crystalforest -image by adding the location of the meta-crystalforest layer to -bblayers.conf, along with the meta-intel layer itself (to access -common metadata shared between BSPs) e.g.: - - yocto/meta-intel \ - yocto/meta-intel/meta-crystalforest \ - -Crystal Forest layer is meant for building both Crystal Forest Gladden -and Crystal Forest Server platforms. By enabling Crystal Forest layer, -the image you build is able to boot on both supported platforms. - -To enable the Crystal Forest layer, add the Crystal Forest MACHINE to -build/local.conf: - - MACHINE ?= "crystalforest" - -You should then be able to build a crystalforest image as such: - - $ source oe-init-build-env - $ bitbake core-image-sato - -At the end of a successful build, you should have a live image that -you can boot from a USB flash drive (see instructions on how to do -that below, in the section 'Booting the images from /binary'). - -As an alternative to downloading the BSP tarball, you can also work -directly from the meta-intel git repository. For each BSP in the -'meta-intel' repository, there are multiple branches, one -corresponding to each major release starting with 'laverne' (0.90), in -addition to the latest code which tracks the current master (note that -not all BSPs are present in every release). Instead of extracting a -BSP tarball at the top level of your yocto build tree, you can -equivalently check out the appropriate branch from the meta-intel -repository at the same location. - - -II. Booting the images in /binary -================================= - -This BSP contains bootable live images, which can be used to directly -boot Yocto off of a USB flash drive. - -Under Linux, insert a USB flash drive. Assuming the USB flash drive -takes device /dev/sdf, use dd to copy the live image to it. For -example: - -To boot on both Gladden and Server Platforms: - -# dd if=core-image-sato-crystalforest.hddimg of=/dev/sdf -# sync -# eject /dev/sdf - -This should give you a bootable USB flash device. Insert the device -into a bootable USB socket on the target, and power on. This should -result in a system booted to the Sato graphical desktop. - -If you want a terminal, use the arrows at the top of the UI to move to -different pages of available applications, one of which is named -'Terminal'. Clicking that should give you a root terminal. - -If you want to ssh into the system, you can use the root terminal to -ifconfig the IP address and use that to ssh in. The root password is -empty, so to log in type 'root' for the user name and hit 'Enter' at -the Password prompt: and you should be in. - -III. Device Notes -================= - -a. Boot Loader --------------- -- Support BIOS version at Shumway board (HighlandForest/CrystalForest-server): - CCFRCLC0.019 - -- Support BIOS version at Stargo board ( CrystalForest-Gladden ): - CIVGCCK1.86C.0003.P00 - -b. I/O drivers --------------- --Support Matrox graphic card. --Support SATA, USB Host v2.0 --Supported I/O devices (APIC, RTC, SPI, UART, I2C, LPS, SMBus i801, - WDT, and HPET) - - -IV. Enabling Intel DPDK and QuickAssist Technology -=================================================== - -There are recipes available for the 'Intel Data Plane Development Kit and -Intel QuickAssist Technology components for use with this BSP. Please -contact your Intel Field Sales Representative or visit Intel Embedded Design -Center (www.intel.com/p/en_US/embedded/designcenter) for instructions on how -to locate and use these recipes. - ----- - -If you find you're getting corrupt images on the USB (it doesn't show -the syslinux boot: prompt, or the boot: prompt contains strange -characters), try doing this first: - -# dd if=/dev/zero of=/dev/sdf bs=1M count=512 |