| Age | Commit message (Collapse) | Author |
|---|
|
It includes the following change:
- e6b4241 wandboard: Fix mmcroot device name
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
It includes the following change:
328e7d6: warp: Fix RAM size runtime detection
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
It includes the following changes:
ae973bc warp7: Select secure boot
b66cb5f warp7: Modify fdt_file environment variable
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This backport following changes from upcoming 2016.09 release:
16a2670 arm: imx: Add support for Advantech DMS-BA16 board
b5e61c4 mx7dsabresd: Print secure/non-secure mode info
28830fe mtd: nand: mxs: fix cache alignment for cache lines >32
Change-Id: I332effe171f58f814f5f525e835b22f6e54e5601
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This backport following changes from upcoming 2016.09 release:
e38d99f MAINTAINERS: i.MX: Add board/freescale/*mx* path
aad9e75 mx7dsabresd: MAINTAINERS: Add mx7dsabresd_secure_defconfig
c40981b mx7_common: initialize generic timer on all CPU's
bb7dbb1 mx6ul_14x14_evk: Remove unused define
1f89a59 cgtqmx6eval: Remove uneeded PHYS_SDRAM_SIZE
5433e5c novena: Remove uneeded PHYS_SDRAM_SIZE
97145ad bx50v3: Use imx_ddr_size() for calculating the DDR size
557c86a aristainetos: Use imx_ddr_size() for calculating the DDR size
f2ff911 warp: Use imx_ddr_size() for calculating the DDR size
7b53769 warp7: Move some USB configuration options to defconfig
bc7bbb5 colibri_imx7: add Colibri iMX7S/iMX7D module support
c2381c0 cgtqmx6eval: Replace is_mx6q() for macro
9280131 mx6cuboxi: Replace is_mx6q() for macro
5396047 wandboard: Replace is_cpu_type() for macro
ccbd486 imx: ventana: add dt fixup for watchdog external reset
6da2a41 imx: ventana: refactor board-specific dt fixups (no functional change)
f13197c imx: ventana: make hwconfig initialize based on board configuration
505d466 imx: ventana: add extra DIO's for GW5520
ede70ae imx: ventana: make number of digital I/O's dynamic
85327cb imx: ventana: make RS232 enable board specific
67d376a imx: ventana: re-enable late board info display
1f71a76 imx: ventana: default pci to disabled
71fbd29 pci: allow disabling of pci init/enum via env
e315991 imx: ventana: add dt fixup for eth1 mac-address
c8bfa71 imx: ventana: add dt fixup for GW16082 irq mapping
6308105 mx7dsabresd_secure_defconfig: Use CONFIG_ARMV7_BOOT_SEC_DEFAULT
6eae48f pico-imx6ul: drop warning due to redefined
c5502fb mx6: wandboard: fix warning due to missing prototype
a9fef43 Fix build for mx7dsabresd (secure config)
Change-Id: I1fa2a8a4db9d265494831deef53a11633faf3454
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes:
- 9da4a42 Revert "imx_common: Return MMCSD_MODE_FS in spl_boot_mode() also for EXTFS"
- 7be8ff4 serial_mxc: Remove unconditional DCE setting
- 6dec211 mx6: clock: Fix the logic for reading axi_alt_sel
- 68f2c3e Revert "arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite"
- 2fd99ea imx_watchdog: add weak attribute to reset_cpu function
- c782384 mx7_common: use Kconfig for ARMv7 non-secure mode
- b8cc70e mx7_common: Put display board info config into board file
- 72a9967 mx7: set soc environment according to exact SoC type
- ff3ecc4 usb: ehci-mx6: introduce config for high active power pin
- 97488b5 usb: ehci-mx6: configure power polarity in usb_power_config
- ce0c796 usb: move CONFIG_USB_EHCI_MX7 to Kconfig
- e22ac58 dm: imx: serial: Support DTE mode when using driver model
- 65db95b warp7: Remove CONFIG_BOOTDELAY variable
- 1231d04 ARM: configs: cm_fx6: add mtd support
- 14619b5 ARM: board: cm_fx6: fixup mtd partitions in the fdt
- 9fa3af0 fdt_support: define stub for fdt_fixup_mtdparts
- f1a2b56 ARM: configs: cm_fx6: improve default environment
- d1e28f0 pico-imx6ul: Add PMIC support
- 292806e wandboard: move environment partition farther from u-boot.img
- 8b5df31 Revert conversion for config_distro_bootcmd.h
- 9222180 Merge pull request #11 from Kynetics/2016.07+fslc
- 1207b97 warp: Change default bootenv configuratio
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Besides the 2016.07 final changes, this includes following new
commits:
20b081a usbarmory: Add board_run_command() function
19900ff usbarmory: switch to using kernel zImage
9f616f6 imx6: clock: typo fix
6874a9e arch-mx6: fix MX6_PAD_DECLARE macro to work with MX6 duallite
5f816d8 pico-imx6ul: Add USB Host support
3a09cf7 video: allow version string to be optional when using LOGO
Change-Id: I5d3da661ef6f8e0a766950bb4fcecc7813a19a46
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This upgrades for the upcoming 2016.07 release. This is based on top
of 2016.07-rc3 plus i.MX pending patches.
Change-Id: I6abdde5f7ada253f62c3adc884a497888a609db8
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following fixes:
3106462 mx7dsabresd: Fix the boot of a NXP kernel
401468c mx7: Place MX7_SEC option in Kconfig
Change-Id: If54a89f104a6d340df911c43ba4b22f526aa6c65
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Fix the following build error under gcc6:
| ../include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
| #include gcc_header(__GNUC__)
Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following commit from U-Boot fslc:
6e4d8c5 pico-imx6ul: Select CONFIG_HUSH_PARSER option
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This merges the changes of final 2016.05 release on top of FSLC fork.
Change-Id: I99179beec9a75aead1bbe27de689005b9d129490
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The U-Boot 2016.05 is close to release and it is time to upgrade. This
includes following changes on top of upcoming release, which are Yocto
Project related:
0fcd279 wandboard: Drop revision specific DeviceTree support
0ab586a mx6sabresd: Enable video interfaces in bootargs
5976978 Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
91f4fa5 iMX6: Change mmcroot to use fixed mmc block index for USDHC
968d872 embestmx6boards: Change default bootenv configuration
3233072 mx6sabresd: Use LDO dtb file until LDO bypass support is added
df5f668 mx6slevk: Use LDO dtb file until LDO bypass support is added
The following changes are included here, and queued for U-Boot 2016.07
release:
a858d98 ARM: mx6: Enable MMC and SATA extfs boot support
70f4d22 SPL: Add CONFIG_SPL_ABORT_ON_RAW_IMAGE
5054e50 SPL: Let spl_parse_image_header() return value
bf9c724 imx: imx-common: print i.MX 7 SoC names consistently
dd6d9db imx: imx7d: fix ahb clock mux 1
24f4bb6 imx: iomux-v3: fix UART input selects
83609b3 ARM: mx6: Enable STDIO deregistering on Novena
0fc4e56 imx: mx6: mx6sl_pins: add GPIO variant for SD1_DAT5
ffae8c1 imx: tools: imximage: fix CLR bit command
Change-Id: I82aba59b47dfe530a6a1243f3227b914b973205f
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Includes support for i.MX 6UltraLite T1.1 silicon.
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Mistake in usptreaming 4.1.15-1.0.0 - should use SRC_URI instead of UBOOT_SRC
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This brings following backports/fixes:
1e82446 mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations
e578035 mx6qarm2: imximage_mx6dl.cfg update to fix tINIT3 violation
adc86d5 mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file
83195c2 warp7: Pass the UART base definition
87a2283 mx6sabresd: Remove unneeded enable_lvds() function
8f1927e arm: mxs: Update MX28EVK config
db8b958 mx6sabresd: Use VESA 1024x768 timings
49185d3 mx27: 16-bit wide watchdog registers
cfc4a96 mx6sabre_common: Fix U-Boot corruption after 'saveenv'
d955806 arm: mx5: Enable NAND TrimFFS on M53EVK
0aea495 imx: print ARM clock for clocks command
1a1ac16 imx: mx6ul configure the PMIC_STBY_REQ pin as open drain
6f8ee92 imx: mx6ul: skip setting ahb rate
60b774d imx: mx6: Fix incorrect clear mmdc_ch0 handshake mask
fe3704b Revert conversion for config_distro_bootcmd.h
8a68957 Revert "warp7: Add initial support"
Change-Id: I7a04b21f4ec9aac0a58adb1233d208b1ae2c3258
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates the fork for the 2016.03 release. Currently following
patches are applied on top of it:
fd6b196 warp7: Add initial support
f9dc5fe wandboard: Drop revision specific DeviceTree support
b3e771e mx6sabresd: Enable video interfaces in bootargs
e0a65b1 Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
af0e438 iMX6: Change mmcroot to use fixed mmc block index for USDHC
36a641b embestmx6boards: Change default bootenv configuration
f97660e mx6sabresd: Use LDO dtb file until LDO bypass support is added
4064b09 mx6slevk: Use LDO dtb file until LDO bypass support is added
f854376 imx: mx7d: move MX7D to Kconfig entry
8a29233 imx: mx6sx: move MX6SX to Kconfig entry
d85319f arm: mx6: Add CCV xPress board support
fe7917e arm: mx6: Add UART8 base address for i.MX6UL
8730cc5 arm: imx6: Switch DDR3 calibration to wait_for_bit()
91c85e8 warp7: Add initial support
ca3306a mx7_common: Put early/late init configs into board file
1dfebcc mx7: Distinguish between dual and solo versions
dfcf27d mx7dsabresd: Define serial port locally
95817e0 mx7_common: Remove unexisting options
78eb121 arm: imx: Add support for GE Bx50v3 boards
Change-Id: I0e7ddd021fd87ffe8a5ad6916fd1eb7a3243b21b
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Consolidate GA support i.MX 6Q/QP/D/S/SL/UL and 7Dual
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates the fork for the 2016.01 release. Currently following
patches are applied on top of it:
5da7953 wandboard: Drop revision specific DeviceTree support
3a636ab mx6sabresd: Enable video interfaces in bootargs
bec0ad3 Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
fad3922 iMX6: Change mmcroot to use fixed mmc block index for USDHC
3c73816 embestmx6boards: Change default bootenv configuration
90bac9b mx6sabresd: Use LDO dtb file until LDO bypass support is added
885c473 mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following backported changes from 2016.01 development tree:
1b6aee7 mx7dsabresd: add secure boot support
54021ea imx: hab: add mx7 secure boot support
eea967b imx: hab: use read_fuse for secure boot settings
cca95ea arm: imx: add secure boot fuse details for imx7 SoC
5ef219e arm: imx: add secure boot fuse details for imx6 SoC
b2842cc imx: hab: add secure boot fuse details
31454f2 imx: hab: rework unified rom section for mx7
9ac3e4b imx: hab: use unified rom section for mx6sx and mx6ul
20235de imx: hab: rework secure boot support for imx6
8574461 imx: cpu: move common chip revision id's
a0c37ef imx: mx6sabresd: add i.MX6DQP Sabresd support
93bcc5f imx35, flea3: add FIT image support
10ca202 ts4800: add CONFIG_OF_LIBFDT
4198580 arm, imx6, aristainetos2: set gpr register after reset
e06ab75 arm, imx: add some gpr register defines
8af784c driver: misc: add MXC_OCOTP Kconfig entry
a022163 imx-common: timer: clean up code
Besides those, it also include:
4238786 cgtqmx6eval: Fix SPL support
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Fixed the following build errors with gcc5:
|error: linux/compiler-gcc5.h: No such file or directory
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the Congatec QMX6 SPL support which is targetting
inclusion for U-Boot 2016.01 release. The following patches are
included:
23575d2 cgtqmx6eval: Add DFU support
112dfb1 iomux-v3: Take MX6D in consideration for imx_iomux_v3_setup_pad()
bf2ca16 cgtqmx6eval: Add SPL support
3bce451 cgtqmx6eval: Add fastboot support
77b786a cgtqmx6eval: Use SPI NOR to store the environment
f6bc396 cgtqmx6eval: Add SPI NOR flash support
540baa3 spi: Add SPI NOR protection mechanism
6e057b9 spi: sf_ops: Add SPI protection mechanism from the kernel
3f150e4 powerpc: Remove __ilog2_u64 and ffs4 from bitops
2feb00c compat: Remove is_power_of_2() definition
254550e nios2: Use the generic bitops headers
7611cdc nds32: Use the generic bitops headers
f9bfea4 openrisc: Use the generic bitops headers
d2f21eb sparc: Use the generic bitops headers
fde093e sandbox: Use the generic bitops headers
ef582a7 sh: bitops: Use the generic bitops headers
d068eae blackfin: bitops: Use the generic bitops headers
37d32df m68k: bitops: Use the generic bitops headers
902775c4 x86: bitops: Use the generic bitops headers
6ab6bf2 ARM: bitops: Use the generic bitops headers
8324309 include: Add generic bitops headers
5054c77 include: Add log2 header from the kernel
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This merges the v2015.10 final changes onto the FSLC fork, bringing
the fixes done on top of the rc5 release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Those patch files were left orphan when upgrading the linux-imx and
u-boot-imx recipes, becoming unused. The removal of them cause no harm
and helps to keep the metadata clean.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Update the U-Boot fork to a 2015.10-rc5 based version. This brings
several fixes for i.MX and Vybrid based systems. Mainly:
cf04ad3 arm: vf610twr: improve memory layout
d45fd01 colibri_vf: Fix bstlen field
e24bb2b mtd: nand: vf610_nfc: resync with upstream Linux version
f861f51 ls102xa: Fix reset hang
f532727 imx_watchdog: Add a header file for watchdog registers
040ef8f pcm052: fix MTD partitioning
61903b7 imximage: fix commands other than write_data
835c30e imximage: header.length of 4 is valid
Change-Id: Ifdb607d9a94ef594f3fe37d2b6388dc9a8268106
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates the fork based on upcoming 2015.10 release. This is
currently based on 2015.10-rc3 tag and offers a very solid release for
start the tests for Yocto Project 2.0 release.
Change-Id: I1d35409a9806a96f8dd538e2b8c2a3520e9104ba
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
QuadPlus and Ultralite were each standalone releases so keep
baranches and commits specific to each standalone release.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This upgrades the U-Boot 2015.07 fork to include following backports:
3f0c535 udoo: Remove SPL fat support
87c4294 arm: mxs: make inline function compatible for GCC 5
a3c103e udoo: Switch to SPL support
963982d cgtqmx6eval: Use standard boot script
70bbfc1 cgtqmx6eval: Align DCD settings with Congatec's U-boot
a17e383 cgtqmx6eval: Add SATA support
825ced0 cgtqmx6eval: Add splash screen support
26a3d35 cgtqmx6eval: Add USB support
7a902c7 cgtqmx6eval: Add PMIC support
9991641 cgtqmx6eval: Add thermal support
1702fa7 cgtqmx6eval: Add ESDHC3 support
4a01796 cgtqmx6eval: Fit into single lines
3b8bc2d cgtqmx6eval: Improve the error handling
03d8850 cgtqmx6eval: Staticize when possible
d199d1f cgtqmx6eval: Use the default CONFIG_SYS_PBSIZE
c3bb8cc cgtqmx6eval: Use default prompt
389d672 mmc:fsl_esdhc invalidate dcache before read
2aa590e warp: Add MAX77696 support
b446a29 power: pmic: Add support for MAX77696 PMIC
0c610df thermal: Fix comments
7869cf1 imx: imximage: add new CHECK/CLR BIT command
f18b011 arm: mx6: tqma6: Add WRU-IV baseboard for the TQMa6 SoM
7e23759 mx6sabresd: Use 'int' for return values
c5fb677 mx6sxsabresd: Use 'int' for return values
b713ff9 builderthread.py: Keep 'SPL'
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Upgrade to 2015.04 version and add i.MX 6UltraLite.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Update to latest fixes in 3.14.38-6QP_beta which adds
support for i.MX 7Dual and i.MX 6QuadPlus boot configurations.
Bug fixes for i.MX 6 boards including ARM errata fixes.
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This upgrades the FSL Community fork to a 2015.07-based one. The
following patches are applied on top of the original source code:
31851bd wandboard: Drop revision specific DeviceTree support
a31d74b mx6sabresd: Enable video interfaces in bootargs
9aaf17f Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
05c69ef wandboard: Changed mmcroot variable so kernel 3.10.31 boots
3e86dfb iMX6: Change mmcroot to use fixed mmc block index for USDHC
44ffc6d mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT
7767edb embestmx6boards: Change default bootenv configuration
bebd6c7 mx6sabresd: Use LDO dtb file until LDO bypass support is added
8a82d9d mx6slevk: Use LDO dtb file until LDO bypass support is added
6f3f04e thermal: imx_thermal: fix busywait if IMX6 temp <0C
a978050 tools: mkimage: fix imximage header size
8788cb7 i2c: fix vf610 support
a7fd9dd net: fec_mxc: remove useless struct nbuf
823ba31 iMX: adding parsing to hab_status command
0210211 imx: mx6 add i2c4 clock support for i.MX6SX
8e45722 imx: mx6 remove duplicated enable_cspi_clock
bf639dd imx6: standardise OCOTP and fuse config to mx6_common
4d4c88c thermal:imx_thermal: enter busywait cooling loop when over max CPU temp
c23cd60 mx53loco: Use generic 'load' command instead of 'fatload'
Change-Id: I7215c00328e6110fb40effa0514a28d076bbedf0
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The i.MX31 and i.MX35 has been barely used and without much community
coverage since its inclusion making them untested boards.
There is no reason to keep the support for those SoCs in the BSP layer
as those are virtually not tested and unkown to be working or not.
The metadata related to the i.MX3 SoC family has been removed in this
commit so if someone ever wants to bring it back it is easy to find
out all the necessary changes.
Change-Id: I808bf7d1cfa97eb7d444fba711a93b1e074d5f4d
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Builds for 'nand' booting were failing because of an incorrect path
during compilation.
Signed-off-by: Gary Thomas <gary@mlbassoc.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Changes:
1. Rebased on git://git.denx.de/u-boot.git v2015.01-487-gab92da9
2. Applied another 143 FSL/backported patches (git log ab92da9..)
3. add DEPENDS on dtc-native as u-boot brings in device tree files
4. use u-boot-with-spl-pbl.bin for nand
5. replace with u-boot-dtb.bin when swapping the image endianness
Signed-off-by: Ting Liu <ting.liu@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
There is no benefit to having a separate .inc file when we only support one
version of u-boot-ls1.
Signed-off-by: Ting Liu <ting.liu@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Update the u-boot 2015.04 branch to include the following change:
b1bf90e mx6sabresd: Enable video interfaces in bootargs
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This backports following changes from 2015.07 development release:
10aced3 thermal: imx_thermal: use CPU temperature grade for trip points
b02bbe4 imx: mx6: add display of CPU temperature grade in print_cpuinfo()
959d59a imx: mx6: add get_cpu_temp_grade to obtain cpu temperature grade from OTP
133492b imx: mx6: display max cpu frequency in print_cpuinfo()
b1a9761 imx: mx6: add get_cpu_speed_grade_hz func to return MHz speed grade from OTP
ac4fa5f mx6: add OTP bank1 registers
982b630 arm: mx6: ddr: set fast-exit on DDR3 if pd_fast_exit specified
c462c40 arm/imx-common: Fix warning 'get_reset_cause' defined but not used
666a3df pmic: pfuze100 fix typo
2216998 imx: mx6sx enable SION for i2c pin mux
019f86c imx: marsboard: Enable thermal DM support
386878a imx: riotboard: Enable thermal DM support
0e80b68 imx: riotboard, marsboard: Enable thermal support
bf9a6d7 hummingboard: Remove unused directory
c46ff16 imx: ventana: add pmic_setup to SPL
d12faa5 imx: ventana: (cosmetic) clean up size defines for improved readability
86f9770 imx: ventana: config: use MMC SPL RAW support
c52aa2e env_nand: use nand_spl_load_image for readenv if SPL
5559f42 imx: ventana: use stack relocation
cd10311 imx: ventana: add GSC boot watchdog disable to SPL
079ca00 imx: ventana: add gpio setup to SPL
484f580 imx: ventana: use common uart and i2c setup functions in SPL
3dcd603 imx: ventana: detect pmic using i2c probe instead of board model
32f01d2 imx: ventana: move GSC boot watchdog disable function to gsc.c
defe0e8 imx: ventana: split out common functions between SPL and uboot
7a22259 imx: ventana: default msata/pci mux to pci before PCI enumeration
e2e0076 imx: ventana: fix pcie reset for GW522x
265e3fb imx: ventana: config: enable Thermal support
a8c94f9 imx: ventana: enable DM_SERIAL
a4f84a5 imx: ventana: register gpio's with gpio_request
872b1ae imx: ventana: config: enable driver model
6f94cad imx: ventana: config: enable gpio command
e574abe imx: ventana: display SPL boot device
31da35f imx: ventana: set dtype env var to boot media
ebec986 arm: mx6: ddr3: Remove dead code
d2249d2 i2c, mxc: rework i2c base address names for different SoCs
9c4a63b arm, imx6, i2c: add I2C4 for MX6DL
f27f41c mx6: Set shared override bit in PL310 AUX_CTRL register
143286c tbs2910: add CONFIG_SUPPORT_EMMC_BOOT
0104511 tbs2910: use default CONFIG_SYS_PBSIZE
6358e0b tbs2910: only enable vga output for stdout/stderr when hdmi detected
abce3a9 tbs2910: support for usb otg host mode
6d261b5 warp: README: Fix typo
5433284 imx: ventana: fix boot to SD
6219fb9 imx: dek_blob: Add explicit include for mapmem
57ffb41 bugfix i.mx6 pwm: prevent overflow of period_c * duty_ns
Change-Id: I4449a78c6f5ee86476894b146534b30d39a109cd
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes some backports of 2015.07-rc1 release which are related
to i.MX and Vybrid families. The backported changes are:
b16ec2d mx6cuboxi: Mention Cubox-i in the README
4cf36bf hummingboard: Remove mx6solo specific support
e767d87 mx6cuboxi: Skip usb initialization when booting without HDMI
6d87db5 mx6cuboxi: Pull down PAD_ENET_RXD0/RXD1
ef1be8d mx6cuboxi: Fix Ethernet PHY detection problem
c11bc28 logos: Add Solidrun's logo
df66a37 mx6cuboxi: Allow HDMI and USB keyboard to be stdout/stdin
43c9802 mx6cuboxi: Add USB host support
9403159 mx6cuboxi: Add HDMI output support
2ee593f Fix mxc_hab documenation
f1b4690 arm: mx6: Clamp MMDC and DDR3 clocks for timing calculations
8afedb2 colibri_vf: Enable USB support for Colibri Vybrid
1c322c8 usb: host: Add ehci-vf USB driver for ARM Vybrid SoC's
8f3b4af ARM: vf610: Initial integration for Colibri VF50/VF61
ec4acf4 ARM: vf610: Enable caches
d0b33b7 ARM: vf610: Add SoC and CPU type detection
6adfaab ARM: vf610: Enable external 32KHz oscillator
0cbdc08 ARM: vf610: Move DDR3 initialization to imx-common
dd995b9 Merge remote-tracking branch 'imx/master' into patches-2015.04
205d586 mx6cuboxi: Load the correct 'fdtfile' variable
6a305f2 mx6cuboxi: Use more standard namings for fdt variables
feb6cc5 mx6cuboxi: Differentiate Cubox-i and Hummingboard
8cb6817 mx6cuboxi: Introduce multi-SoC support
cfdcc5f mx6cuboxi: Prepare for multi SoC support
b684586 mx6cuboxi: Fix the defconfig name
f5e23aa unzip: add gzwrite command to write compressed image to block device
5b9f6a3 gunzip: add gzwrite routine for extracting compresed images to block device
120aea5 ARM: cm_fx6: use "select" instead of default value in defconfig
755bd40 ARM: mx6: use "select" instead of default value in defconfig
Change-Id: Ic3a0ecbd09e7a76d3ef732414184473a32952ac3
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates U-Boot 2015.04 version with some fixes and improvements
from 2015.07 release. Those are:
cba4c25 mx6sabresd: Remove uneeded ifdef
407be42 mx6sabresd: Fix SPL memory description
761bc19 nitrogen6x: allow gzipped bitmap display
1c29ad7 iMX: Fix compilation error when enabling SECURE_BOOT
6b396b3 arm: mx6: tqma6: Extract baseboard configs into separate config file
76962d0 power: pfuze100: fix LDO_EN bit value
9e2b0c2 imx: ventana: Update missing memory/calib handling
767d88b imx: ventana: Add new memory configuration
18b3a91 imx: ventana: set HDMI video in to yuv422bt656 for GW551x-A
a2559f1 imx: ventana: use hdmiinfmt env var to override HDMI capture format
e9fc6d1 imx: ventana: add DT fixup for GW522x to change PCIE_RST# GPIO
ee5931d imx: ventana: add 'gsc wd' command for enabling and disabling GSC watchdog
4569cd5 imx: ventana: added device-tree display configuration for LVDS displays
f02390b imx: ventana: add support for DLC-700JMGT4 and DLC-800FIGT3 LCD displays
9506970 imx: ventana: add DT fixup for GW54xx compatibility with older kernels
7f14c31 imx: ventana: remove 128x16 calibration (share with 128x32)
06edcb9 imx: ventana: updated 16bit DDR calibration
eeca451 imx: ventana: added DT fixup for GW551x-A video input
45af3f7 imx: ventana: gsc: add new hwmon rails
e732917 imx: ventana: add mem_mb dynamic env var
16e369f imx: ventana: remove GSC hwmon voltage rail min/max test
e2801a9 imx: ventana: update boot scripts to support ubifs boot vol
aec3761 imx: ventana: only pinmux FEC enet signals for boards using it
7c5cd42 imx: ventana: add wdis config for GW5520
0417169 imx: ventana: add usb_pgood_delay 2sec default
75f21e3 imx: ventana: Add support for GW551x
0c81b14 imx: ventana: disable IMX6 watchdogs on GW51xx RevA and RevB
1274bd2 imx: ventana: fix various sparse warnings
30dc880 imx: ventana: config: enable EXT4 filesystem read/write support
f6747cd imx: ventana: config: enable edid support
8cc25eb imx: ventana: config: Support ramdisk
9543e95 imx: ventana: config: add USB Mass Storage (ums) support
4717e13 imx: ventana: set LTC3676 PMIC to appropriate values per datasheet
b0b8334 imx: ventana: add support for 4Gb density mem devices with IMX6DL
29f0d6b imx: ventana: enable precharge power-down fast-exit mode
a51de27 imx: ventana: add usb_pcisel hwconfig support
3ee26ec imx: ventana: remove unused GPIO configuration
e806b22 imx: ventana: assign default ethprime dynamically
0a6ee03 imx: ventana: add i210 support
306568d imx: ventana: disable 4k tftp/nfs packets
b8ce6fe mx6: Add initial SPL support for HummingBoard-i2eX
08daa25 fdt: add new fdt_fixup_display function to configure display
78c5a18 arm: mx6: ddr: add pd_fast_exit flag to system information
32f9ef3 ARM: mxs: Get boot mode from OCRAM
Another change included is:
fb25693 Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
Which has been necessary to allow RIoT Board to work out of box with
current SDCard layout used in meta-fsl-arm. Thanks to Nikolay Dimitrov
<picmaster@mail.bg> and Gary Thomas <gary@mlbassoc.com> for reporting
the issue.
Change-Id: I7d13baefcda8f68fb9be618ea1eb55fc96bce5c2
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The 2b3a8e87 has the 2015.04 final release merged. So the current set
of changes applied on top of the 2015.04 release are:
59e39d3 wandboard: Changed mmcroot variable so kernel 3.10.31 boots
48b8a98 iMX6: Change mmcroot to use fixed mmc block index for USDHC
2f1399e mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT
b265496 embestmx6boards: Change default bootenv configuration
d8c2380 mx6sabresd: Use LDO dtb file until LDO bypass support is added
1556dde mx6slevk: Use LDO dtb file until LDO bypass support is added
Change-Id: I0b9d5b812c20809b35521ff6dab8e2dda50ddd3c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Include support for i.MX 6 DQ Sabre Auto CPU2 board
Bug fixes since 3.10.53-1.1.0 GA
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates the fork based on upcoming 2015.04 release. This is
currently based on 2015.04-rc5 tag and offers a very solid release for
start the tests for Yocto Project 1.8 release.
Change-Id: I15519ffc7a28411f850bcf8492d8e5fb981bec7c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*fix the following error:
|couldn't open "/poky/build/tmp/work/ls1021aqds-poky-linux-gnueabi/u-boot-ls1/2014.07-r0/git/u-boot.bin": no such file or directory
(From OE-Core rev: eca277b0af9e0e29022f81f54c17bf24aec02232)
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This patch introduces a new base SoC family "vf". The family includes
all Freescale Vybrid SoC based modules, which is the single core
(vf50/VF5xx) or dual core (vf60/VF6xx) variant.
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This does the backport of following changes:
614dd54 mx5: fix get_reset_cause
2db5ec7 mx6slevk: Provide a proper pad configuration for OTG1_ID pin
32f9568 mx6sabre: Select CMD_EXT4 options
8fc3c92 mx6sabre: Enable User Mass Storage
f2e5464 board: tbs2910: Enable USB Mass Storage support
47d960e mx35: Fix boot hang by avoiding vector relocation
7827b39 mx31: Fix boot hang by avoiding vector relocation
be1165e mx25pdk: Turn on the LCD supply
777f0aa zmx25: Convert to generic board
646fb52 imx31_phycore: Convert to generic board
ff37ab6 mx31ads: Convert to generic board
e74b278 mmc: fsl_esdhc: Add support for DDR mode
Fixed [YOCTO: #7384]
Change-Id: I6eeb0a03a9909aea0157e57472780fe4ddbc04c1
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This backports following fixes from the upcoming U-Boot 2015.04:
5d0291f warp: Add User Mass Storage support
49ad0f1 warp: Select BOUNCE_BUFFER and CMD_EXT options
5a10751 cmd_usb_mass_storage: Remove extra 'ums' string in the usage text
dd00fe2 warp: Add initial WaRP Board support
b9b6996 imx: mx6sl: Extend USDHC SD2 pins to support 8-wire use
4a01af4 mmc: fsl_esdhc: Add support to force VSELECT set
11688e5 mmc: fsl_esdhc: Add CMD11 support to switch to 1.8V
c1b0c39 imx:mx6slevk implement power init board
996d2cb imx:mx6slevk add pmic and i2c configuration
509825c imx:mx6sl add I2c pad settings
9867962 nitrogen6x: set environment variable reset_cause
64a6057 ARM: i.MX: provide access to reset cause through get_imx_reset_cause()
d4c17e7 ot1200: add eeprom command to non-SPL build
7270ed6 cmd_eeprom: make it possible to define the used i2c bus
dadd721 ARM: imx6 Add WDOG3 for i.MX6SX
3f5ba06 ARM: imx6: disable bandgap self-bias after boot
Change-Id: I7a73b8722de1085ef93129c4e801617204d483e7
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following backports from the 2015.04 upcoming release:
6e66aed imx:mx6 set normal APS and standby PFM mode
7a5cac0 pmic: fix missing SWITCH_SIZE
f98e73a pmic:pfuze implement pmic_mode_init
d79d747 mx53loco: Fix boot hang during reboot stress test
a5fb3c4 arm: mxs: Add 'Wait for JTAG user' if booted in JTAG mode
685ec23 arm: mxs: Enable booting of mx28 without battery
19161e5 arm: mxs: Add debug outputs and comments to mxs SPL source files
062e666 imx: mx6: Fixed AIPS3 base address issue
bc83af2 imx: imximage: Add QuadSPI boot support
364658f imx: mx6qsabreauto: Change to use common GPMI IO clock function
8c23f6f pmic:pfuz100 add switch mode and more registers
8385185 pmic:pfuze add macro for setting voltage
d8cd731 imx:mx6 update fuse_bank0_regs
d41380a fsl/ls1021qds: Add deep sleep support
8fe3f3b arm: ls102xa: Add LPUART support for LS1021ATWR board
3408c48 arm: ls102xa: Add LPUART support for LS1021AQDS board
e70b26f ls102xa: fdt: Disable QSPI and DSPI in NOR/NAND/SD boot
809e163 arm: ls102xa: Update snoop settings for CCI-400
2650c5d ARM: HYP/non-sec: Make variable gic_dist_addr as a local one
b2c8ac3 ls102xa: dcu: Add platform support for DCU on LS1021AQDS board
7f0f245 crypto/fsl: Add fixup for crypto node
8023778 arm: ls102xa: Add dummy gpio.h to enable CONFIG_OF_CONTROL
79dcb3a ls102xa: etsec: Select ge0_clk125 for eTSEC clock muxing as default
636e863 arm/ls1021a: Add workaround for DDR erratum A008378
Change-Id: I91b013eb0d4a7741aa360f701e86f3dfdfccb6c8
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates the revision to 4dab988, which includes following
changes:
4dab988 arm, imx6, aristainetos: board updates
1dfbf54f arm: mx6: cm-fx6: add splash screen support
f1882ea compulab: splash: support loading splash from sf
4c2bf3a compulab: splash: support multiple splash sources
a7d780b compulab: splash: refactor splash.c
46cef71 compulab: splash: use errno values
a2c128c arm: mx6: cm-fx6: add support for usb keyboard
71582ee arm: mx6: cm-fx6: display compulab logo
af637a8 arm: mx6: cm-fx6: add hdmi console support
e8d2b04 arm: mx6: cm-fx6: increase size of malloc area
6449956 arm: mx6: cm-fx6: pass 2nd nic mac addr to Linux
f3aba9f compulab: eeprom: allow reading mac address from multiple eeproms
3dafefb arm: mx6: cm-fx6: change dtb node for ethaddr
3f84477 arm: mx6: cm-fx6: expand boot sequence
0f1c4ca ot1200: add ot1200_spl_defconfig file
892bf75 ot1200: add basic SPL support
4b29ad8 ot1200: add SPL configuration
a94b46b ot1200: enable spi clock directly in ccgr_init(..)
0eeddfb ot1200: move ccgr and gpr init to c functions
b708920 ot1200: make use of imx_ddr_size(..)
3762dab ot1200: select SUPPORT_SPL
0bbf5e8 imx: mx6: Change ENV offset to 512K bytes for larger u-boot image
31f433e imx:mx6sxsabresd board spl support
4c46ecb imx:mx6 add mx6sx in imx spl header file
195c032 imx:mx6sx add dram io configure for mx6sx
982c08f imx:mx6sxsabresd spl support in header file
1551931 imx:mx6sxsabresd select SUPPORT_SPL
f15ff8f imx:mx6sxsabresd add spl config file
8cbbb75 mxsboot : Support of 224-bytes OOB area length
c717a19 mx6sxsabresd: Remove unneeded board_late_init()
5358bea spl: spl_nor: surround Linux-load code with #ifdef CONFIG_SPL_OS_BOOT
f041545 arm: vf610: Remove duplicate MTD defines.
Change-Id: Ib116be2e61828581ee97bc1a2536f83df6b39036
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
Fabio Berton
Breno Lima
Daiane Angolini
Otavio Salvador
Zhenhua Luo
Fabio Estevam
Lauren Post
Lauren Post
Chunrong Guo
Gary Thomas
Ting Liu
Fabio Estevam
Stefan Agner