Age | Commit message (Collapse) | Author |
|
In case host does not have libssl available, mkimage will fail to run
as the linking flags where not complete.
Fixes [YOCTO: #6098]
Change-Id: Ia7bd80b500ac6e60357f1e61d304bee4e3cb6832
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates U-Boot to a v2014.01 based release. It includes following
patches on top of prestine v2014.01 tag:
490069b mx6sabresd: Use LDO dtb file until PMIC support is added
6467f19 mx6slevk: Use LDO dtb file until PMIC support is added
5555f1b i.MX6: nitrogen6x: pedantic: BOOT_FROM==spi, not sd
029912e NET: fec_mxc: fix MDIO clock prescaler calculation
0163b4c ARM: imx6: fix wrong fec clk
9f120dc pci: mx6: Implement reset callback
d016d9d mx6: Enable L2 cache support
8b8c015 mx6qsabreauto: Update imximage.cfg
fbd6105 mx6: Distinguish mx6dual from mx6quad
7d7f526 imx: Introduce a header for the imx cpu versions
7717807 hummingboard: Return from cpu_eth_init() directly
58ea0f3 imx6: make sure MMDC_CHx_MASK is clear to avoid warm reset failure
8612ce3 imx6: ensure AHB clock is 132MHz in low freq boot mode
094a791 ARM: m53evk: Enable CONFIG_REGEX
778d80a ARM: m53evk: Rename mxc-nand to mxc_nand
e470e26 ARM: mx6: Enable PCIe on Sabrelite
0a666db ARM: mx6: Add PCI express driver
274fd14 ARM: mx6: Add PCI express clock configuration
5aebc94 mx6sl: Adjust fdt_addr to avoid address overlapping
95a98c2 mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT
cd0b4d9 MX6: Add SION flag to ENET_REF_CLK PAD
Change-Id: I2bd74338c2e099b1e09cd504c6e8faefaa68d504
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This allow removal of the PRINC, which is deprecated and will be
removed after Yocto Project 1.6 release, from meta-fsl-arm-extra. The
equivalent change need to be updated in meta-fsl-arm-extra at same
time, to avoid version to go backwards.
Change-Id: I373a009a9d167b9b733274d0c17c95dedc1d9293
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add the FSL U-Boot i.MX 2013.04 version in the Manufacturing Tool
variant to allow building a specific version for use with it.
Change-Id: I1ccf806f283acb336efd06c018e0a206e261d22c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This makes a separated binary set for Manufacturing Tool use without
clobbering the U-Boot used for normal use.
Change-Id: Ie059e65581c999546586018975d3fa4a4b04e5d2
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
I noticed SRCBRANCH_mx5 was being specified twice.
The first one should probably be "mxs" instead as the
row below which specifies SRCREV for mxs.
Signed-off-by: Andreas Henriksson <andreas.henriksson@endian.se>
|
|
Change SRCREV to 31d023b to make zImage default boot image for
Wandboard.
Signed-off-by: John Weber <rjohnweber@gmail.com>
|
|
Update the SRCREV to ceb6b623 to grab the latest commit which updates
the fdt_addr variable to a higher address to ensure that the device tree
binary does not overlap larger kernels during the unpack process.
Signed-off-by: John Weber <rjohnweber@gmail.com>
|
|
The new BitBake fetching code requires the revision to be available in
a know branch so we need to provide this information here.
This patch fixes 2009.08 and 2013.04 recipes.
Change-Id: Id4bbdcadb72e09eb7880ecf19b49bba0ede64f8e
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
If SRCREV is not in the master branch, the SRC_URI must specify the
branch.
Signed-off-by: Daiane Angolini <angolini@gmail.com>
|
|
Separate the recipe into two files in the same fashion as the kernel
recipes. A u-boot-fslc.inc file contains the common settings for the
recipe, and a .bb file contains the settings specific to the version
of u-boot to be built (e.g. SRCREV, branch name).
In addition, new versions of bitbake require that a branch be specified
and that the SRCREV be in the specified branch. Set the branch in the
SRC_URI.
Branch code based on patch from Dan McGregor <danismostlikely@gmail.com>
Change-Id: I89d017fa4cc3e7addbea89d49605f78e3d84e246
Signed-off-by: John Weber <rjohnweber@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change-Id: Ibf044f87e090ebdbf303a3dedd0ddf74e621ab08
Signed-off-by: Lauren Post <lauren.post@freescale.com>
|
|
This includes following commit:
commit 079e214888279518ce061c71238a74a0c3db2c28
Author: Fabio Estevam <fabio.estevam@freescale.com>
Date: Mon Sep 30 13:16:52 2013 -0300
ARM: mx5: Enable L2 cache
Enable L2 cache for improving the system performance.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Change-Id: I33c66775b42e46beff8868daeb46404541c2f387
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following commit:
commit 3832258715cd19aa3e26ac5f35ef7be230454924
Author: Otavio Salvador <otavio@ossystems.com.br>
Date: Tue Oct 29 15:00:24 2013 -0200
mx6sabre{auto,sd}: Change FDT loading address to avoid overlaping
The new FSL 3.10.9_1.0.0-alpha kernel requires more memory space and
with the previous loading address we had ovelap; change it for the
same address used in 2013.04-3.10.9_1.0.0-alpha U-Boot.
Tested-by: Daiane Angolini <daiane.angolini@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Change-Id: I7bf08f962b7956ba6f4c645a1d3ed0188eb8ac0d
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates the U-Boot fork to a 2013.10 based release and include
following changes on top of that:
4b2e99f mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT
60fe20e mx28evk: Extend environment to easy write of NAND system
e2f0dee mx28evk: Add 'nandboot' environment command
319cafc mx28evk: Use 512k for fdt partition to align it
e92e0d3 imx_watchdog: do not soft-reset while watchdog init
Change-Id: Ib875751bdc66325fb8237c553529a2462bd76176
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change-Id: I107e8a9929b25dd1b6361912d2eed64ddfeb2a94
Reported-by: Philippe Mangaud <r49081@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes U-Boot 2013.10-rc4 based version plus following change:
d97067b mx6sabresd: Use mmcblk0 for CONFIG_MMCROOT
The change is need, together with a linux-imx change for eMMC
registering number, to allow same U-Boot environment to be compatible
with Linux mainline and Linux FSL 3.0.35-4.1.0.
Change-Id: Id9937a7be74b5dd6a5848e81395193bfd13e67a9
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This allow U-Boot to build the need native tools during the build
process.
Later this ought to be reworked to proper split this into a cross
recipe but it is too late in the Yocto 1.5 release for it.
Change-Id: I069313b991778ea1502995beb36224fe1ae8c996
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
It causes build failures in several machines and it's too late to
rework it properly.
This reverts commit 2076ae7530a7ed2aa40678502598e74b0f533def.
Change-Id: I2f0c21559516195941832c2bca7b1dc50c90852a
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The 'tools' directory build native binaries and we ought to avoid them
when doing a target build.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This fixes the build to not link and user host OpenSSL contents.
Change-Id: I5d088d791a83c4b24ee6ea85037c82103c12fb3f
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates the u-boot-fslc and u-boot-fslc-mxsboot recipes to
aa822f4 (Merge tag 'v2013.10-rc3' into patches-2013.10).
A new dependency, of openssl, has been add to u-boot-fslc-mxsboot as
it needs to look to it when building for MX23 or MX28 SoCs.
Change-Id: I914a4e808fa0211eefa8e30aa4f6bb03e01e5a04
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This patch updates the source against the 2013.10-rc2 release; this
also renames the u-boot-mxsboot recipe to u-boot-fslc-mxsboot so it
makes it clear that it is based on u-boot-fslc version.
The license checksum has changes as U-Boot now uses SPDX Unique
License Identifiers (eca3aeb Licenses: introduce SPDX Unique Lincense
Identifiers).
Change-Id: I761d92f3f1eaf419a238d544357293a3a953b7c8
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add some commits over 2013.04 that includes:
* Add CPU temperature support
* Add i2c support for imx6qsabresd
* New machine definition (i.e. imx6sauto, imx6dlauto)
* Update DDR script for imx6qsabre{auto,sd}
* Include machine variation (i.e. NOR, NAND, WEIM-NOR, SPI-NOR)
and more, in a total of 35 commits.
This version been tested for i.MX6 only, so it is compatible with
i.MX6 SoCs only.
Change-Id: I3ada0ec7332f3f5141263ec3ed166b448e8c3675
Signed-off-by: Lauren Post <lauren.post@freescale.com>
|
|
Change-Id: I51e1b780c7860a16d722f49072915ad194fd5df7
Signed-off-by: Andy Voltz <andy.voltz@timesys.com>
|
|
This updates the U-Boot for 2013.07 final release and adds a single
patch on top of it, to fix Wandboard splash alignment.
The included changes are:
b899fa3 arm: at91sam9n12: change EBI IO to high drive mode
8b415f7 ext4fs: le32_to_cpu() used on a 16-bit field
50ffc3b fs/ext4: fix log2blksz un-initialized error, by cacaulating its value from blksz
62c175f Prepare v2013.07
cba5372 wandboard: Use splash image at screen center by default
Change-Id: I03f41014c1303afa9caa6ad26b89209e8bc63920
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The 2013.07-rc3 had a regression in network support for some i.MX6
boards, fixed by 9ba30f6 (phy: fix 10/100Mbps operation on
1Gbps-capable links), and instability in Nitrogen6X boards, fixed by
fdf86c2 (ddr cfg: DRAM_RESET needs 0x00020030).
Change-Id: Id9aac5d3f2efc27dbf0420d1eda500ef373ea25f
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
I am pleased to commit this change as this is the first time ALL
PATCHES previously kept in the patches-2013.07 branch were applied in
the current release of U-Boot mainline and all environment changes are
also fully merged. I know we shortly will end backporting a fix or
improvement, during 2013.10 development, but it is an accomplishment
worth keeping record ;-)
Change-Id: If2de1dbd8721f8ddb21d0091e87f31109b8b8e7a
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates the U-Boot code to the v2013.07-rc2 tag and also merges
the imx/master tree on it. This contains most changes which will
affect us in the upcoming 2013.07 release and should allow us to give
it a good test.
Change-Id: I5f4d3770bbc264ba85dc38b93ffc9db31633a0ff
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates the U-Boot and mxsboot utility to the 2013.07-rc1
release.
Change-Id: Ib1079c18bd17fd59cd77ba604de770262784d63b
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The 4.0.0 version supports all i.MX6 variants so we can use a single
revision for them all.
Change-Id: I6a2ea90b1609a696c6f40a296e2e6612b14d40d9
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Include following fixes:
* i.MX6: Enable ARM ERRATA #742230
* i.MX23: Fix DDR instability
This also updates 'mxsboot' recipe for the same snapshot to keep both
in sync.
Change-Id: Idf452ad4a37d6eb85cb7f5c6d04377e09fe1dd91
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Include following fixes:
* i.MX53 ARD: Backport environment fixes from 2013.07
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This features the following updates:
* Fixes i.MX51EVK board support
* Update to 2013.04 final release
Change-Id: Ia3870c3306c4532cc4e2969941236c2f817b1c07
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates to U-Boot 2013.04-rc3 based code and changes the U-Boot
target for using in i.MX31PDK as it was changed in this release.
Change-Id: I670abc0bf709c86ebff8195b9dab00b21f2c4615
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Include following fixes:
* i.MX6Q SabreSD/SabreAUTO: Environment fix for 'mmc rescan'
* i.MX6SL EVK: Fix memory size
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates our U-Boot mainline based branch to a 20130409 snapshot;
the u-boot-fslc and u-boot-mxsboot recipes were updated.
Change-Id: I89a3608e1cd94a7e26307c9dbe7774975af7baa3
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The latest tested u-boot version for iMX6SL EVK is from
Freescale BSP 12.10.02
Change-Id: Iecfa1f1ba29e93ec6238be4d2e6414542b5f6307
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
iMX6DL SabreSD u-boot from Freescale 3.0.0 BSP
Change-Id: I80cc181dba57d23cef4bbf388ae7b88058c7cdab
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
iMX6SL EVK u-boot from Freescale 3.0.0 BSP
Change-Id: Iedb942f3f1669991711c3b6bffb409ed288180e8
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
When loading a Freescale 2.6.35 on a mx28evk the following issue is
seen:
sgtl5000_hw_read: read reg error : Reg 0x00 Device with ID register 0
is not a SGTL5000
Disabling CONFIG_CMD_I2C makes the sgtl5000 probe to succeed.
Mainline kernel does not show this problem.
Until the real cause is not identified, disable 'CONFIG_CMD_I2C' for
the time being.
Change-Id: I1c79a6f7567611ce846383686481fbf923ed3434
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Comparing the DDR2 initialization from the bootlets code against the U-boot
one, we can notice some mismatches, and after applying the same initialization
into U-boot the 2.6.35 kernel can boot normally.
Change-Id: If71d4a22ebb8c064e98e050b78d8c2e87d8ce6c8
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change-Id: I35753f16b26516ffcc20d51624240430eedcdb37
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change-Id: I77cfb14fb92ac6750fab472b8a529a0157c899e0
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This adds the upstream fixes released in 2013.01.01 plus a bugfix for
iMX6 watchdog's power down bit that fixes the i.MX6Q SabreSD (rev C)
reboot loop.
Change-Id: If29b8a5c6caf8edb206143fd1ae51776153e3742
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This fixes many issues with 2012.10 release and allow for testing of
all boards before the final release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This update includes the following changes:
mx53loco: Change default loadaddr to 0x72000000
mx6qsabrelite: Change default loadaddr to 0x12000000
mx6qsabre_common: Change default loadaddr to 0x12000000
mx28evk: Add support to dynamically choose between ftd use or not
mx53loco: Add support to dynamically choose between ftd use or not
mx6qsabrelite: Add support to dynamically choose between ftd use or not
mx6qsabre{auto,sd}: Add support to dynamically choose between ftd use or not
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|