Age | Commit message (Collapse) | Author |
|
Correct entry point for mxs is 0x40008000.
Also remove the unneeded UBOOT_LOADADDRESS.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
Place the entry points for mx31 and mx35 into the common
imx-base.inc instead of having them in board .conf files and also remove
the unneeded UBOOT_LOADADDRESS occurrences.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
The recommended entry points for generating a uImage are the ones listed
in the zreladdr line of the kernel Makefile.boot file:
(arch/arm/mach-<soc>/Makefile.boot)
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
The SOC_FAMILY uses the MACHINEOVERRIDES and it evaluates from left to
right. In this case, the most SoC specific value needs to be kept in
the right so it take precedence.
This has been catch when finding out why i.MX6SL EVK where using the
wrong value as entry point, and this was the root cause.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The code uses UBOOT_ENTRYPOINT as default value for UBOOT_LOADADDRESS
so we don't need to have the variable UBOOT_LOADADDRESS set unless
it's different from UBOOT_ENTRYPOINT. This also fix the i.MX6SL entry
point hex format.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
i.MX3 doesn't has GStreamer plugins packaged so we need to avoid its
installation for now.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The imx-audio package is currently only available for i.MX5 and i.MX6
so we should include it in every SoC family. This fixes i.MX31 and
i.MX35 image build due unsatisfied dependency.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The i.MX25, i.MX27, i.MX31 and i.MX35 are not fully supported and we
don't have the firmware package for them so comment them out so it
doesn't break the build.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The U-Boot 2013.04 does not has support for i.MX6DL SabreSD so ensure
we use U-Boot 2009.08 until it is added.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The multimedia plugins provided by Freescale will be
installed by default when adding gstreamer to image.
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
Change-Id: Idae0e65cb469643bd866caa3ed77af86f554616c
|
|
Allow use of U-Boot mainline as default for i.MX6DL based boards.
Change-Id: I985d82b04238b7b9677b556f5986d9557ad11c2c
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change-Id: I8e5b3d6b31267f6cfcfe11be9a7aa4d6a5fdfec0
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The U-Boot now supports the imx23evk board so we now use it by
default. The imx-bootlets support is still available in case someone
needs it.
Change-Id: I321e1b8e461e5bdfa9995964e4ab1c779c222c6b
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This removes the U-Boot common definitions from imx28evk board as they
are shared with all 'mxs' SoCs.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Change-Id: I44d33aa54971534c07a240e6cf88c0c4b3051f25
|
|
Change-Id: I49ac52d1289aedbcda6ad1399bf04ae363f43dc4
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change-Id: If9dbc35a3ad2253e3433c3f90837b9559bf435d9
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The SabreLITE is much better supported by Boundary kernel as being not
fully supported by Freescale new BSPs it should be moved to the Extra
layer where we can properly support it.
Change-Id: Ie6465c35a243cb199c3499eb4336c9638c9ce6ab
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
We have problems supporting newer Xorg Video API so we're forcing the
use of an older version of Xorg server to workaround it.
Change-Id: I369619a489f2b4b0ba963efb0c937f9568d772f0
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change-Id: I7c1b6324925f8d9b5d534cb9ab5999d5e864597e
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add machine definition for Freescale i.MX6DL SabreSD board.
Also called i.MX6DL SDP
Change-Id: I4bfa8568109bc76e1f4880dbb7266691e25874cc
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
Add machine definition for Freescale i.MX6SL EVK board
Change-Id: I696ca2dc1705d2095afbf2f16c62ed79404966ad
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
XSERVER is already defined in imx-base.inc, no need to re-define it again.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
'kernel26' feature has been already removed in oe-core.
No need to keep this anymore.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
|
|
Signed-off-by: John Weber <rjohnweber@gmail.com>
|
|
Change-Id: Ib4a16f5c02fb93490dae70e316ac9883b2da1f9a
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This avoids full rebuild in case of compatible machine changes (e.g
i.MX53 and i.MX6) and fixes the build failures seen in autobuilder.
[YOCTO #3667]
Change-Id: I4c46499d00e95738409ee39a659e93095dd7f207
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The iMX3 SoCs need to use regular linux-libc-headers as the
linux-libc-headers-imx does not support this SoC family.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The preferred kernel for i.MX3X SoCs are the same so we should set it
in imx-base.inc. The previous setting were not working as the board
files were using weak setting and the default (linux-imx) were being
used by mistake.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The 'freescale' collection name is too generic without making clear
which architecture it supports. Using 'fsl-arm' we make it clear.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
http://cgit.openembedded.org/meta-openembedded/commit/?id=3c21a46020bd0816579648f684c41dbd6333583e
This triggers
exception NameError: name 'base_contains' is not defined
without this change
Signed-off-by: Andrei Gherzan <andrei.gherzan@windriver.com>
|
|
The OpenEmbedded-Core has update udev to 182 so making
Meta-OpenEmbedded one no more required. This allow us to simplify the
layer and remove a default dependency in Meta-OpenEmbedded.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Andrei Gherzan <andrei.gherzan@windriver.com>
|
|
Drop the limitation for mx6 family for gstreamer.
Allow mx6 family to use accelerated codecs for gstreamer.
Change-Id: I182d50b48b2979a680c0a0ba602f077f30136ce9
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
Change-Id: I9fb4fa04aef988fb8fd3105ab9444276ea0cbc29
Signed-off-by: Adrian Alonso <aalonso00@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
The imx-lib doesn't need to be explicitly included as it will be
included onto the image if a package using it is included.
Change-Id: I8e9ad632894aff79c5fed23b1ae3862bd78a4f47
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change-Id: Ib495f2861be3f5906c533d4771e2331676214e99
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change-Id: I3afbbe9acc2fe91bbbb2caf246cfb781e030e2d5
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change-Id: Ie8501d8e4336d80a7ab6c4c0415562229b2213dd
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change-Id: I952910e3d6d96a78acbeacad31cbf1034f31cce5
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This class provides the mechanism used for unpacking
the .bin file downloaded by HTTP and handle the EULA acceptance.
Change-Id: I88857c7dac94568c5bced4e712744087638de68a
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
The mx5 GPU libraries provide OpenGL ES1, OpenEGL and OpenGL ES2 only
so we need to ajust the PREFERRED_PROVIDER.
Change-Id: I569fabc91349c3d3a8804ff72e67e9bcc88b1267
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change-Id: If0a7d72b93c3c4646fb59cc4f59fd5fd5e0cae43
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
The imx-base.inc default to use u-boot.imx as U-Boot target and imx as
U-Boot suffix but the Soc needs to use u-boot-nand.bin as U-Boot
target and bin as U-Boot suffix.
Signed-off-by: Amjad Afzaal <bcsf09m001@pucit.edu.pk>
|
|
Change-Id: Icd0514481da4bfd392b0cca36fbc13d0318dca73
Signed-off-by: Muhammad Usman <m.usmannn@gmail.com>
|
|
Change-Id: I548d97f785ab05099d290b10121963feb2952c8b
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
Signed-off-by: Amjad Afzaal <bcsf09m001@pucit.edu.pk>
|
|
The use of imx-firmware, while supported, is not recommended so we now
use the new package name.
Change-Id: I434e5c41f7856839ddee6f7ca74a21da9fd260e0
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|