aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2016-02-11imx6slevk: Add epdc uboot configuration and epdc firmware integrationLauren Post
SoloLite has epdc hardware configuration which is enabled by both uboot and firmware. Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11imx6qsabred: Add Murata BT/WiFi module supportLauren Post
Add Murata Type ZP (BCM4339) module support on below platforms: - i.MX6Q/DL/QP SabreSD(SD2 slot) + Murata adapter V2.0 Note: MX6Q/DL/QP SabreSD board requires HW rework. Please refer to rework guide specified in schematic. Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11imx6qsabresd: Remove imx6q-sabresd-uart device treeLauren Post
Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11imx6dlsabresd.conf: Add epdc boot configurations and epdc firmwareLauren Post
Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11imx6dlsabred: Add Murata BT/WiFi module supportLauren Post
Add Murata Type ZP (BCM4339) module support on below platforms: - i.MX6Q/DL/QP SabreSD(SD2 slot) + Murata adapter V2.0 Note: MX6Q/DL/QP SabreSD board requires HW rework. Please refer to rework guide specified in schematic. Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11linux-imx: Upgrade to 3.14.52-1.1.0_ga Consolidatd GA releaseLauren Post
Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11xf86-video-imxfb-vivante: Upgrade to 5.0.11.p7.4 versionNeena Busireddy
- License changed to MIT. - Remove the upstreamed patch. Signed-off-by: Neena Busireddy <neena.busireddy@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11weston: Add patches to fix bugsNeena Busireddy
- Patch to fix setenv and clear environments. - Patch to fix screen blur for Qt5 CinematicExperience. Signed-off-by: Neena Busireddy <neena.busireddy@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11kernel-module-imx-gpu-viv: Upgrade to 5.0.11.p7.4 versionNeena Busireddy
Signed-off-by: Neena Busireddy <neena.busireddy@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11imx-gpu-viv: Add dependency on libpngOtavio Salvador
This fixes following warning, found on O.S. Systems' autobuilder: ,---- | WARNING: QA Issue: imx-gpu-viv-tools-apitrace rdepends on libpng, but | it isn't a build dependency? [build-deps] `---- Series-to: meta-fsl Series-prefix: meta-fsl-arm Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11imx-gpu-viv: Update to 5.0.11-p7.4 versionNeena Busireddy
This version is released with 3.14.52-1.1.0_ga release. Includes many of the bug fixes and stability improvements. For more information refer to i.MX Linux Release Notes from following link: http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/i.mx-applications-processors-based-on-arm-cores/i.mx-6-processors/i.mx6qp/i.mx-6quad-processors-high-performance-3d-graphics-hd-video-arm-cortex-a9-core:i.MX6Q?fpsp=1&tab=Documentation_Tab#nogo L3.14.52_1.1.0_LINUX_DOCS package is under Supporting Information. Signed-off-by: Neena Busireddy <neena.busireddy@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11libfslvpuwrap: Upgrade to 1.0.62 versionLauren Post
Add frame rate check and return failure if frame rate is invalid value (<=0) Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11libfslparser: Upgrade to 4.0.8 versionLauren Post
-Support hevc in MPG2 parser. -Enhance the parsing conditions in SPS nal unit. Parse system header to get stream id. For mpeg video, don't call parseh264 to avoid mistakes. -Fix memory leak, free temp data buffer after parsing header. Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11libfslcodec: Upgrade to 4.0.8 versionLauren Post
Version alignment with other Multimedia components. Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11gst1.0-fsl-plugins: Upgrade to 4.0.8 versionLauren Post
-Fix memory leak in overlaysink, imxv4l2sink and imxcompositor. -Fix IPU/PXP frame copying beyond the memory boundary. -Add more holding buffer number for motion 0 and 1 in imxv4l2sink to fix deinterlace failure. -Add divx support in vpudec, including 3,4,5,6. -Add video overlay composition meta support to imxvideoconvert and imxcompositor. -Remove unsupported formats for pxp 2d deivce. -Simplify the caps in pad template of imxvideoonvert/imxcompositor/overlaysink/imv4l2sink. Signed-off-by: Lauren Post <lauren.post@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-02-11u-boot-fslc: Update to U-Boot 2016.01 based forkOtavio Salvador
This updates the fork for the 2016.01 release. Currently following patches are applied on top of it: 5da7953 wandboard: Drop revision specific DeviceTree support 3a636ab mx6sabresd: Enable video interfaces in bootargs bec0ad3 Revert "embestmx6boards: convert to use config_distro_bootcmd.h" fad3922 iMX6: Change mmcroot to use fixed mmc block index for USDHC 3c73816 embestmx6boards: Change default bootenv configuration 90bac9b mx6sabresd: Use LDO dtb file until LDO bypass support is added 885c473 mx6slevk: Use LDO dtb file until LDO bypass support is added Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-01-26imx-base.inc: Move IMAGE_FSTYPES override to a SoC variableOtavio Salvador
The IMAGE_FSTYPES need to be overriden without using the SoC family overrides, for user-friendness, and to allow this we need to use a SoC variable to construct the default value for setting. Related to [YOCTO: #8945]. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-01-19imx-base: Set UBOOT_ENTRYPOINT for i.MX6ULJun Zhu
As i.MX6UL has been changed out of mx6 SOC family, it need set UBOOT_ENTRYPOINT Signed-off-by: Jun Zhu <junzhu@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-01-19xserver-xf86-config: use modesetting for VybridStefan Agner
Explicitly use the generic Xorg driver for KMS devices. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-01-19imx-base.inc: use modesetting driver for VybridStefan Agner
With the use of the new DCU DRM driver we can make use of the X-servers modesetting DDX driver. The driver uses directly the DRM/KMS interface. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-01-19linux-fslc (4.4): Introduce Linux 4.4 kernelStefan Agner
Introduce Linux 4.4 based vanilla Linux kernel. This version allows to use the DRM DCU driver on Vybrid (with some additional patches). Also enable PWM support through Vybrid's FlexTimer module, and update the defconfigs. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-01-11qt4: Move BSP related bbappend files to dynamic layerOtavio Salvador
The Qt4 recipes are now in a specific layer, meta-qt4, so we cannot append those recipes if the layer is not included. This moves the bbappend files to the 'qt4-layer' collection, enabling it in case the collection is available. Fixes [YOCTO: #8898] Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-01-11imx-gpu-viv: Use auto package splitting of .debug filesOtavio Salvador
Since OE-Core:da5ec068 there is the possibility of splitting the .debug files automatically. The imx-gpu-viv does not provide very useful debugging information, due its proprietary nature, so splitting the provided info across multiple packages just makes the debugging harder. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2016-01-11gstreamer1.0-plugins-imx: Update to version 0.12.0Carlos Rafael Giani
Changes: * vpu: - Completely rewritten plugin code; elements now based on libimxvpuapi instead of libfslvpuwrap - imxvpuenc_h264 inserts SPS/PPS data in front of I/IDR frames - imxvpuenc_mjpeg's quality factor actually has an effect, and is equivalent to the libjpeg's quality factor (it is used in exactly the same way to scale the quantization matrix' coefficients) - the encoder's output buffers no longer have to use DMA memory; they use regular system memory instead - new support in imxvpudec (referred to as "chroma interleaving") for NV12, NV16, NV24 as output formats as an alternative to the I420, Y42B, Y444 formats - removed all of the system frame number tracking code, since it is unnecessary; Instead, the libimxvpuapi's context fields are used to associate input/output frames with GstVideoCodecFrame system frame numbers - fix memory leaks related to missing buffer pool unref'ing * imxv4l2videosrc: - support for crop metadata - element uses the width, height, etc. of the format that the device actually uses during operation (instead of default values) - autofocus control support via GstPhotography - fix incorrect GLib warnings - fix segmentation fault when shutting down the element * eglvivsink: - remove extra g_free() calls, which lead to runtime errors - remove GLESv2 VIVANTE link dependencies - add Android platform - manually retrieve VIV direct texture functions with this and the link dependency elimination, this means that for platforms except the framebuffer one, no Vivante specific headers and libraries are needed anymore - fix blocking issue in the Wayland platform mainloop * improved and expanded documentation * pxp: NV16 *is* supported after all (it was actually a bug in GStreamer pre-1.5.91) NOTE: this does not break compatibility with GStreamer versions older than 1.5.91 * compositor: Update backported aggregator code to GStreamer 1.6 * blitter: - error handling improvements - add missing buffer pool unref'ing, which lead to memory leaks - add missing compositor dependency to blitter base * uniaudio: - only build the uniaudio plugin if at least one codec was found during configuration - disable plugin if the gstaudio library is not available - add AAC profile field to the sink caps with GStreamer >= 1.4.4 to ensure the uniaudio decoder is only used for AAC-LC data * ipu: increase fill frame width from 8 to 64 pixels to make IPU fill operations work with pre-3.14 Freescale kernels * g2d: use padding pixels when setting surface parameters, fixing G2D failures with frame sizes that aren't aligned * wscript: - improve Android support - fix installation paths for the common, blitter, compositor libraries Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-12-21libimxvpuapi: Update to version 0.10.1Carlos Rafael Giani
Changes: - add debian packaging files - update waf to version 1.8.16 - add workaround in wscript to prevent stale pkg-config .pc files - fix memory leak by adding missing IOFreeVirtMem() call in vpulib backend Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-12-19imx-gpu-viv: Remove wrong imx-gpu-viv-tools-dbg packagingOtavio Salvador
The imx-gpu-viv-tools-dbg package where pointing to the very same binary as imx-gpu-viv-tools, instead of the counterpart .debug file. This removes this definition. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-12-19fsl-vivante-kernel-driver-handler.bbclass: Postpone defconfig changesOtavio Salvador
The defconfig changes should be done later in the process so the .config file is generated, using any other mean, and mangled to respect the distribution setting regarding the module use or not. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-12-17linux-fslc: Upgrade to 4.3-based kernelOtavio Salvador
Besides the revision change, this synchronizes the defconfig used for the i.MX and the Vybrid SoCs. The only SoCs using a specific defconfig file are the MXS-based ones (i.MX23 and i.MX28) as the others are consolidated on the single defconfig file. Change-Id: Id00d6dbaa8fcec5c9b6c5089d11d1ebe5c0e44e1 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-12-03barebox: update to 2015.10Alexandre Belloni
2013.08 doesn't compile anymore because of the switch to gcc 5.2 Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-12-03xf86-video-imxfb-vivante: Stop using swaprep.h headerOtavio Salvador
The 'swaprep.h' is an internal Xorg header and is not being installed anymore. The swap features are provided by the 'misc.h' header now. Fixes [YOCTO: #8737] Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-12-03xf86-video-imxfb-vivante: Stop using Git to write local versionOtavio Salvador
The standard version does not use a Git repository so we should not use Git to identify the commit of the build as it can end getting the version from a wrong repository and can be misleading. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-12-03xf86-video-imxfb-vivante: Move patches attribution to the recipeOtavio Salvador
The patches applied on top of the source code are version specific and should not be listed in the '.inc' file. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-12-03xf86-video-imxfb-vivante: Stop running 'make' in debug modeOtavio Salvador
There is no need to run 'make' in debug mode, by default, as it increases log size and build time for no good reason. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-11-27linux-fslc-mx6: Disable Tux logo for default configOtavio Salvador
The Tux logo should be disabled by default to allow a cleaner boot process. If a different configuration is needed of any specific machine, it can be overriden using custom config. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-11-27linux-fslc-mx6: Disable 'evbug' module on default configOtavio Salvador
Disable evbug, so machines using the kernel recipe do not have it loaded by default. The evbug kernel module can be enabled if needed, per machine, using a custom config. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-11-27linux-fslc-mx6: Fix serial console use with SystemDOtavio Salvador
The SystemD requires the CONFIG_FHANDLE option to be enabled to properly support the serial console getty initialization. This fixes following error: ,----[ i.MX6Q SABRE Smart Device boot error ] | [ TIME ] Timed out waiting for device dev-ttymxc0.device. `---- The error has been catch while testing a customer image in a pure SystemD distro, based on O.S. Systems Embedded Linux. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-11-24gstreamer1.0-plugins-bad: Fix patch for GStreamer 1.6Carlos Rafael Giani
Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-11-24kernel-module-imx-gpu-viv: Add 'galcore' to module autoloadingOtavio Salvador
The module autoloading ensures 'galcore' to be probed as early as possible during the boot. The order is important so the GPU can be used as fast as possible, ensuring a reduced time until the initial GPU-based application is loaded. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-11-23u-boot-ls1: The finale u-boot binary is not named as u-boot.bin for sdcard/spiChunrong Guo
Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-11-16linux-fslc (4.1): Update to the latest version e55a6a92Fabio Estevam
This merges the 4.1.13 stable release fixes into the fork. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-11-10Revert "linux-fslc: Upgrade to 4.3-based kernel"Otavio Salvador
This reverts commit 649f479f118567d62a5a57d690fb3fe3915f0ea7. The 4.3 version of kernel cause build errors on lttng and cannot be included until those are fix. We are reverting it now and will add it back once OE-Core is fixed to support it. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-11-10linux-fslc: Upgrade to 4.3-based kernelOtavio Salvador
Besides the revision change, this synchronizes the defconfig used for the i.MX and the Vybrid SoCs. The only SoCs using a specific defconfig file are the MXS-based ones (i.MX23 and i.MX28) as the others are consolidated on the single defconfig file. Change-Id: Id01a6050daaaee9bc931afa4583ec11f7b7d6da1 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-11-05u-boot-fslc: Update revision to 1b6aee7Otavio Salvador
This includes following backported changes from 2016.01 development tree: 1b6aee7 mx7dsabresd: add secure boot support 54021ea imx: hab: add mx7 secure boot support eea967b imx: hab: use read_fuse for secure boot settings cca95ea arm: imx: add secure boot fuse details for imx7 SoC 5ef219e arm: imx: add secure boot fuse details for imx6 SoC b2842cc imx: hab: add secure boot fuse details 31454f2 imx: hab: rework unified rom section for mx7 9ac3e4b imx: hab: use unified rom section for mx6sx and mx6ul 20235de imx: hab: rework secure boot support for imx6 8574461 imx: cpu: move common chip revision id's a0c37ef imx: mx6sabresd: add i.MX6DQP Sabresd support 93bcc5f imx35, flea3: add FIT image support 10ca202 ts4800: add CONFIG_OF_LIBFDT 4198580 arm, imx6, aristainetos2: set gpr register after reset e06ab75 arm, imx: add some gpr register defines 8af784c driver: misc: add MXC_OCOTP Kconfig entry a022163 imx-common: timer: clean up code Besides those, it also include: 4238786 cgtqmx6eval: Fix SPL support Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-11-05imx-base.inc: Add imx-vpu to MACHINE_ARCH_FILTERCarlos Rafael Giani
imx-vpu is machine specific due to #define macros for the type of i.MX6 SoC (quad, duallite ..) Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-11-05libimxvpuapi: Add new recipeCarlos Rafael Giani
This is a library for using the i.MX6 VPU. It is an alternative to libfslvpuwrap, hosted on Github, and has an API that features several improvements over libfslvpuwrap, which include: * User-defined context information associated with input frames, which is passed on to corresponding output frames (to be able to identify which input frame produced which output frame) * Groundwork for future DMA-BUF/BMM/ION/CMA allocator integration, using file descriptors instead of physical addresses * Indicators for when it is safe to try to decode frames, which is critical in multi-threaded playback cases * Simplified, higher-level JPEG en/decoding API, based on the VPU MJPEG codec; useful for picture viewing without the extra boilerplate for VPU-based en/decoding Signed-off-by: Carlos Rafael Giani <dv@pseudoterminal.org> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-11-03gst1.0-fsl-plugin: fix FSL codecs, parser and vpuwrap detectionJavier Viguera
Patch gst1.0-fsl-plugin's configure script to add a trailing space in the FSL_MM_CORE_CFLAGS and FSL_MM_CORE_LIBS variables between different pkg-config executions. These variables are used later to pass parameters to the compiler and as they are not built correctly, the 'configure' script fails to detect some of the functionality: Disabled features: plugin: imxmp3enc plugin: vpu_wrap plugin: aiur plugin: beep This was working well in previous versions of Yocto, because pkg-config until v0.28 was adding that trailing space: http://cgit.freedesktop.org/pkg-config/commit/?id=f26a505826acec6b1e1af8d1efdf959913421c3a but this is no longer true, so the trailing space has to be added in the configure script. Signed-off-by: Javier Viguera <javier.viguera@digi.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-10-29Remove DirectFB support for i.MX6Otavio Salvador
The DirectFB project is dead upstream for a while and the backend is deprecated so it is better to drop it and avoid new users to depend on it and instead to focus in the current technologies for new projects. This commit removes everything related to the DirectFB support so if someone wish to revert it locally it can be easily done. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Acked-by: Daiane Angolini <daiane.angolini@freescale.com>
2015-10-29linux-fslc-mx6-rt: Add new recipeDominic Sacré
This recipe is based on the now-deleted linux-imx-rt recipe, using the same set of patches. The linux-fslc-mx6 kernel is currently at upstream version 3.14.54, for which no realtime patch has been released, but patch 3.14.51-rt52 applies cleanly. Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-10-29Remove MCC libraryStefan Agner
As we moved all the other MCC related recipes (mqxboot and kernel-module-mcc), we should do so too with libmcc. Signed-off-by: Stefan Agner <stefan.agner@toradex.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2015-10-29u-boot-ls: support gcc5Chunrong Guo
Fixed the following build errors with gcc5: |error: linux/compiler-gcc5.h: No such file or directory Signed-off-by: Chunrong Guo <B40290@freescale.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-02 15:57:17 +0000