| Age | Commit message (Collapse) | Author |
|---|
|
*include the following changes:
a48f3ad - armv8: ls1088: Add SD-boot with IFC-NOR RCW
*Update SRC_URL
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
848002f - DNCPE-372: Update license file with NXP-Binary-EULA
9d15cfa - DNCPE-372 Update README for pfe fw binaries
*Update license and md5
*Update SRC_URL
*Fix the installation directory
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
d5b5263 - Add NXP EULA license
*Update license and md5
*Update SRC_URL
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes
57401f6 - Update license to NXP Binary EULA
*Update license and md5
*Update SRC_URL
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*Include the following changes
100cdac - ls2088ardb: update binary for LSDK 1803
daf1656 - add license NXP-Binary-EULA
*Update license and md5
*Update SRC_URL
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
00cde47 - driver: net: fsl-mc: remove usage of CONFIG_FSL_MC_ENET
a2d3f26 - powerpc: configs: Set initrd_high environment varible
cab48d3 - armv8: ls1043ardb_sdcard: delete CONFIG_SPL_FSL_LS_PPA
6f8b6dd - mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled
03560b1 - armv8: sec_firmware: Remove JR3 from device tree node in all cases
123ee86 - ls1088a: qspi: Enable XIP mode above 16 MB addresses
eb3ddd0 - PowerPC: phy: enable all phylib drivers when use phylib and tsec enet
2efee07 - ls2081a: qspi: Enable config to write aligned data to TxFIFO
b32402c - ls2088a: qspi: Enable config to write aligned data to TxFIFO
e7f0b4a - ls2080a: qspi: Enable config to write aligned data to TxFIFO
1c693ab - ls1088a: qspi: Enable config to write aligned data to TxFIFO
edcb0a5 - Kconfig: qspi: Add SPI_ALIGNED_TXFIFO config details
c6a9fe0 - qspi: Add code to send only aligned data to TxFIFO
1f13780 - ls1088a: Moving CONFIG_FSL_QSPI to defconfig
4cbef43 - EHCI: Fix endian access issue on EHCI intinalization
901ad16 - ARMv8: ls1046a: Enable PCIe and E1000 in lpuart defconfig
7340b38 - armv8: ls1088: Add CONFIG_SPI_FLASH_SPANSION to sdcard defconfigs
a17a22d - armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig
226adb1 - armv8: ls1088: Add qixis offsets for lbmap and rcw_src
71fed5f - fsl: common :qixis: Add ifc and emmc switch support in qixis
2705761 - board:ls1012a2g5rdb: define PFE firmware address in kconfig
ec53bd9 - board: ls1012a: update mdio, phy parameters based on serdes protocol
cce1563 - board: ls1012a2g5rdb: avoid phy reset
621dd47 - dm: pci: change bus number register setting compliant with Linux
f5285a8 - armv8: ls1088ardb: secure boot: Use tiny printf to save spl size
a6932b4 - armv8: ls1088a: vid: Add some function in SPL for VID
adc2721 - ls1088a: Add VID support for QDS and RDB platforms
318f7c4 - common: board_f: vid: Add VID specific API to adjust core voltage
d0d1638 - ls1088a: ddr: configure DDR for 0.9v for VID support
55540f3 - ddr: fsl: set cdr1 first in case 0.9v VDD is enabled for some SoCs
2586b3a - board: common: vid: Add support for LTC3882 voltage regulator chip
dfbc0d1 - Kconfig: Add LTC3882 voltage regulator config
f5f238d - board: common: vid: Move IR chip specific code in flag
094c483 - board: common: vid: Add board specific vdd adjust API
9d25d53 - board: common:vid: Add LS1088A VID Supported voltage values
fe1dc63 - armv8: lsch3: Add serdes and DDR voltage setup
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
baa4117 - ls1021aqds: Fix building error for rcw_1200_lpuart.rcw
6be6b63 - LS2088: Add ls2088aqds RCW configuration files
2d595c7 - LS2088: Add ls2088ardb RCW configuration files
3e2a166 - LS2088: Add ls2088asi and ls2088ardb_rev1.1 RCW configuration files
4a24ae1 - GEN3: STOP PBI command support
fd9ba65 - ls1012: Update RCW field names to capital letters
7a77e65 - Parser update in rcw.py to parse all commands correctly
a0509ab - ls1012a: Add ls1012aqds RCW configuration files
2fb781f - ls1012a: Add ls1012afrdm RCW configuration files
789fe36 - ls1012a: Add ls1012a2g5rdb RCW configuration files
d99ea1e - ls1012a: Add ls1012ardb RCW configuration files
d7b599b - ls1088aqds: Add LS1088AQDS RCW configuration files
ad9a5e0 - ls1088ardb: Add LS1088ARDB RCW configuration files
7c47f30 - Add support of Gen3 family SoCs
0aca1b3 - ls1046a: add the PCIe ERRATA A-008851
ef1380f - ls1046a: modify the comments for PCIe ERRATA A-10477
6d2fb95 - T2080: add workaround of errata A-008851
dd2703d - Ls1043a: add workaround for pcie errata A-009859
2a3af68 - ls1021a: add workaround for pcie erratum A-007997 and A-007815
0016a4d - LS1043ardb: Change value of boot Hold-off to 1 for secure boot
1dc888a - ls1021a: qspi_boot: Update u-boot address according to DASH memory mapping
0fc4e54 - SECURE_BOOT: Update u-boot hdr address as per DASH memory map
7e0d447 - ls1046ardb: increase FMan and platform frequency
bb0b497 - ls1021a: Fix QSPI endian issue for QSPI boot on LS1021A boards
5933d84 - ls1043a: Fix QSPI endian issue for QSPI boot on LS1043AQDS
29795c2 - ls1046a: fix PBI of changing QSPI endianness
3d44b7c - ls1043ardb: adds a RCW with GIC 4K supported
12eed09 - ls1043a: Add PBI of changing GIC offset to 4K
feb2eb8 - Add a tclsh script to swap the rcw endian.
6b06c8b - ls1046aqds: Add RCW for ls1046aqds board
5a78426 - ls1046ardb: Add RCW for ls1046ardb board
a1368d1 - arm: ls1021a: add the core frequency to 1.2GHZ support
3ccb308 - t2080rdb: update SRDS2PLL2CR1 to 0x08004100 for errata A-007186
e7e5eef - Update license to BSD
f57329a - update End-User License Agreement
4e64170 - ls1043aqds: revise the description of SERDES1 Protocol 0x3358
d0a2fc3 - ls1043aqds: add SATA support under QSPI boot
3825e4a - ls1021a/ls1043a: byte_swap: should 8 byte alignment
13a13e5 - ls1021a: remove the unnecessary PBI
3b93f86 - ls1043aqds: Clear SerDes RxBoost on lane D
893fff9 - LS1043a-RDB: Add RCW files for UEFI bootloader
f34fb1b - ls1043ardb: SECURE_BOOT- RCW added
ef46e48 - qe-tdm: add qe-tdm support on ls1043ardb
b337f1a - ls1043ardb: Add RCW for ls1043ardb board
f9207c5 - ls1043aqds: Add RCW for ls1043aqds board
*update md5 checksum
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
f00e7ef - Adding smc function SIP_HW_UNQ_KEY_32.
c87863a - Fixing usage of _check_sec_disabled().
d0ec59c - Fix for PLATSEC-437 & PLATSEC-457.
926fb97 - Adding smc function (SIP_ALLOW_L2_CLR_32) to allow clearing of L2 memory errs.
781d7b5 - Fixing broken build of LS1043, LS1012.
7289e86 - Adding smc function SIP_ALLOW_L1L2_ERR_32; Added test for SPD interface.
8804017 - Providing very fast-path for SMCC_ARCH_WORKAROUND_1
e9dfa28 - Moved _soc_check_sec_enabled() to _check_sec_disabled(); Fixed conflicting defs in LX2160 soc.h.
474b797 - Changing LX2160 cluster 3 handling from RCW frequency-based to RCW[850] selectable.
f56bd49 - fuse: Correct OTPMK value mapping to OTPMK registers
cf55298 - Upgrading interface to SMC v1.1
ae458e4 - Fixing stack usage on vector entry.
bb56df5 - Breaking the dependency between isolation macros on EL3 entry/exit.
2ca6e68 - Updating Release Notes with recent changes.
6a409e1 - fsl_sec: Add a timer while polling for hw job ring
9e2e5ef - Disabling CCN-508 init during emulation testing of LX2160.
6c3f455 - Resolving overlapping defs in lsch3.h and multiple soc.h files.
b8dcbbd - Fix build rdb all error
a1d81e8 - fuse: Take care of errata: ERR006879 while programming
ed1abaa - Fixing the broken PPA after SPECTRE Fix, in case of spd enable.
ec1d1f2 - Removing tlbi alle2 from EL3-secure code (causes exception).
2cb8430 - Adding platform-frwy to LS1012.
af62fce - Fixing LX2160 build; Removing rdb from supported LX2160 platforms.
e2445c1 - Add implementation of provision_fuses api
d43f8ab - Add SFP driver framework for fuse provisioning
4ae699a - Adding plat.h to sim builds.
8f12a56 - Add support in gen_its to include fuse script in fit image
446362a - Updating LX2160 test code with changes from latest LX2160 bootrom.
2d98f63 - Generating the OP-TEE Secure Storage Key (SSK) on receiving SMC from OPTEE in PPA, by using CAAM H/W block.
b9ad77f - LX2160 cluster 3 handling based on platform clock.
2295e6b - Adding CCN-508 initialization; Adding platform-emu to LX2160.
91e174f - Adding isolation code on entry/exit to EL3 for Spectre mitigation.
a516af0 - Adding prefetch disable of A53 cores to smc function SIP_PREFETCH_DISABLE_64.
52a32aa - Changing file mode for gen_spd_its.
a0e0479 - QPPA-34 Fix to resolve the 4.4 Kernel 32bit bootup issue.
3107360 - Initializing TZASC after EL3 cache maint ops; Setting OCRAM to secure access only when EL3 stacks are in OCRAM.
db509c5 - Initializing smc global data region;Making data-in-ocram the default.
48ccba3 - Cleaning up code fix for QLINUX-8590.
c1e2177 - Bringing TZASC Enablement under CONFIG_SPD compile time flag.
fac778a - Enable LPM20 on LS2088A
5be38ad - Fix for ls1026ardb/ls1023ardb board boot up issue on dash-lts 4.9 kernel. JIRA Ticket QLINUX-8590
eb40915 - Adding support for LS1012 Freedom board.
833f749 - Fix for launching 32-bit kernel when OpTee is loaded.
75e9909 - Added TZC-380 & TZC-400 drivers for LS1043 and LS1046.
f2eecde - Add proper checking for Trusted-OS vector-table.
24ecac4 - Enable PSCI-CPU-ON notification for trusted-OS.
a9a6f4d - Fix in SPD for Coverity issues in TX1.0 release.
b2979b5 - Disabling and re-enabling SEC on entry/exit to LPM20 on LS1088.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following change:
a631182 warp7: update defconfig to support the generic loading interface
Signed-off-by: Pierre-Jean TEXIER <texier.pj2@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Without this, bitbake use the default one, and not "u-boot-fslc-fw-utils".
This was observed when layer is used together with poky (with Mender).
Signed-off-by: Pierre-Jean TEXIER <texier.pj2@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This pkg will not be supported anymore
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*This pkg will not be supported anymore.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*ppa build support OPTEE-OS parameter.
*Building PPA source with OPTEE-OS
*add ppa-optee recipes
*update to e564143
e564143 - Adding 'execute' bit to gen_spd_its file mode
a0e0479 - QPPA-34 Fix to resolve the 4.4 Kernel 32bit bootup issue.
3107360 - Initializing TZASC after EL3 cache maint ops; Setting OCRAM to secure access only when EL3 stacks are in OCRAM.
db509c5 - Initializing smc global data region;Making data-in-ocram the default.
48ccba3 - Cleaning up code fix for QLINUX-8590.
c1e2177 - Bringing TZASC Enablement under CONFIG_SPD compile time flag.
fac778a - Enable LPM20 on LS2088A
5be38ad - Fix for ls1026ardb/ls1023ardb board boot up issue on dash-lts 4.9 kernel. JIRA Ticket QLINUX-8590
eb40915 - Adding support for LS1012 Freedom board.
833f749 - Fix for launching 32-bit kernel when OpTee is loaded.
75e9909 - Added TZC-380 & TZC-400 drivers for LS1043 and LS1046.
f2eecde - Add proper checking for Trusted-OS vector-table.
24ecac4 - Enable PSCI-CPU-ON notification for trusted-OS.
a9a6f4d - Fix in SPD for Coverity issues in TX1.0 release.
b2979b5 - Disabling and re-enabling SEC on entry/exit to LPM20 on LS1088.
b31c991 - Fix defect inserted into _zeroize_bss() during last commit.
3f83fd1 - Changed name of ddr/spd.c to spd_ddr.c to prevent filename collision with spd/spd.c.
59acbe2 - Fixing LSCH macro usage in timer.c.
030a2d7 - Adding SD/eMMC driver.
46016e6 - Added functions _getGICC_BaseAddr() and _getGICD_BaseAddr() to ls1012.
1f804e6 - Fixed handling of ls1043/ls1046 gic base address.
7e8df4f - Supplying the start address to _relocate_rela() and _zeroize_bss() functions.
dc36a4e - Resequencing the startup code for ddr and non-ddr builds. Fixed handling of input parameters to _ppa_main().
52f6c8b - Cleanup monitor code.
bdd2e61 - Adding temporary stack to bootcore before ppa_main() is called.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
b79fe4b - config: add descriptions to DPCs and DPLs
cc37a9c - config: convert files from dos format to unix
8b3fe8c - config: update source files to match release LSDK-17.09
5b25be0 - config: update source files to match release LSDK-17.06
01a71bb - config: update source files to match LSDK-17.06-EAR
06dda1d - config: add source files for DPLs and DPCs
86da1cf - initial commit
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
bf3ae3c - armv8:LS1012A: Add support for LS1012A-2G5RDB board
e84010a - rcw: remove source files of SoCs
69104c3 - LS1012: Change header location in rcw for Secure Boot
43c79c9 - rcw: ls1088aqds: Add RCW PBL_QSPI_1600_700_2100_0x15_0x0d.bin
6719b04 - Ls1043a: add workaround for pcie errata A-009859
1a6236a - LS1012ARDB: Change rcw for secure boot
cdf4b72 - rcw: ls1088aqds: Add SCSI errata for detecttion of sata
16072f7 - armv8:LS1012A: RCW supporting 1GHz CPU frequency
90aef03 - LS1088ARDB:Reduce size in block copy command
53518dc - rcw: ls1088ardb: Add SCSI errata for detecttion of sata
0a869b3 - ls1021a: add workaround for pcie erratum A-007997 and A-007815
e7f18e5 - ls2088ardb: Add RCW for with platform frequency 700MHz
6f324fc - Use BSD license for both rcw and binary files
c69799f - Added copyright to byte_swap.tcl
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The new name is much more consistent with what this actually means. We put
the pieces in place to rename everything a while back but looks like we
forgot to actually do it! Fix that now.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
cbd5e66 - T2080: add workaround of errata A-008851
13c95e2 - rcw: remove binary files of SoCs
69104c3 - LS1012: Change header location in rcw for Secure Boot
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
9f7df1b - env: sf:Enable environmnet varibale before relocation
840a903 - board/ls2080a, ls1088a: Add check for mc-dpl applied in fdt
208b0b6 - armv8: ls1088 : MC alignment should always be fixed to 512MB
6dd3af0 - ls1012a:dts: Correct LS1012A-2G5RDB device tree
d7ca121 - armv8: layerscape: Discard the needless cpu nodes
69620c9 - armv8: ls1043a/ls2080a: check SoC by device ID
196d773 - armv8: ls1088ardb: support force SDHC mode by hwconfig
68218ae - LS1012ARDB Secure Boot: Add encapsulation support
90a096f - armv8: ls1046aqds: update IFC NOR timings
212917d - drivers: net: pfe_eth: Disable autonegotiation for 2.5G SGMII
77c795d - board: freescale: ls1012a: LS1012A-2G5RDB board support
51c350b - armv8/kconfig: Align boards of same family at one place
6adcdca - driver: fsl-mc: MC object cleanup when DPL not loaded
4b02c65 - powerpc/p1_p2_rdb_pc: Fix endian access issue on EHCI intinalization
bbc95ad - powerpc/T104xRDB: Fix endian access issue on EHCI intinalization
5857001 - boards: ls1046ardb: disable unavailable "ethernet" node in dts
86682f0 - arm: Add support of updating dts before fix-up
df8d00c - common: Fix-up MAC addr in dts by fetching env variable serially
75045a7 - fsl-qbman: Include missing function prototype
269953a - driver: net: fsl-mc: flib changes for MC 10.3.0
813486a - drivers: net: pfe_eth: remove unused code under CONFIG_PFE_WARN_WA
fdf2bf4 - drivers: net: pfe_eth: remove unused code under CONFIG_UTIL_PE_DISABLED
44c39f0 - drivers: net: pfe_eth: cleanup typos and indent
5dc8c93 - drivers: net: pfe_eth: use writel/readl to access hw bds
8dc0a63 - drivers: net: pfe_eth: add pfe_rx_done to clear bd after packet processing
85a3451 - usb: Add delay to fix USB 2.0 stick enumeration failure on LS208xA
139ec62 - Revert "armv8: ls1088a: correct pcie fixup compatible string"
7bd0db8 - SECURE BOOT: Add SD fall back option
2068345 - cmd: mac: Update description of help
b040e4a - armv8: fsl-layerscape: Add support of disabling core prefetch
f53d786 - armv8: fsl-layerscape: Allocate Secure memory from first ddr region
8e9a95e - u-boot: fixup the iommu-map property of fsl-mc node
a95797b - armv7: ls1021a: Fix marco CONFIG_LS102XA
c249f5f - ls1088aqds: Add CONFIG_SGMII_PHYLIB in header file for QDS
64169db - armv8: ls1088: introduce CONFIG_SGMII_PHYLIB
002dc70 - driver: net: ldpaa_eth: Add PHY-less SGMII support
44a294b - drivers: net: ldpaa_eth: Correct error handler for qbman_swp_acquire()
0ca9091 - armv8: fsl-layerscape: Fix MC reserved memory calculation
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
There was a wrong include of u-boot.inc on this recipe which were
causing build errors, also it was using the old target to build the
environment tools.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes on top of 2017.11 tag:
ca0c3f3fac configs: icore-rqs: Enable falcon mode
c39e5ad9ad engicam: imx6q: Return mmc dev 0 for icore
7953884755 i.MX6: engicam: Add imx6q/imx6ul boards for existing boards
924ac4a9ac board: icore-rqs: Fix mmc get env device
1caace2d74 i.MX6UL: icore: Add SPL_OF_CONTROL support
655f153b7c pinctrl: imx6ul: Fix pinctrl data overlapped with DT area
735b8429cf i.MX6Q: icore: Add SPL_OF_CONTROL support
e2aee01772 i.MX6Q: icorem6: Move spl load fit to common/spl
7265424b4b i.MX6: engicam: Move set_fdt_file to common
676484d0f5 mx6sxsabresd: Use PARTUUID to specify the rootfs location
c685436fb6 imx: Remove boolean parameter from wdog powerdown function
dfd399d4b2 imx: Also clear powerdown enable bit for WDOG3 on i.MX6ULL
21e5b103ee mx6ull: Fix WDOG3 base address
28a06c12ca envtools: make sure version/timestamp header file are available
5a3afcb579 mx6sabreauto: Remove unneeded SPL selection
a80c8e3c7a mx6: Select MX6QDL option via Kconfig
7c9d795887 mx53: Add Board support for GE PPD
a7dbf3c3a4 board: ge: make VPD code common
fd7ab796b5 rtc: add support for s35392a
efc51f73e3 bootcount: add support for bootcounter on EXT filesystem
8b0c1c4d23 arm: mx5: Add more register definitions
29e5e9df46 pwm: imx: Enable PWM support on i.MX53
02cc3e8037 ext4: recover from filesystem corruption when reading
4c530ec27c imx: mxc_i2c: tweak the i2c transfer method
87d4563bbd Revert "wandboard: Remove unnecessary delay"
913c93d432 pico-imx6ul: Use FS_GENERIC load command
bd7c72d0e2 pico-imx6ul: Add function to create gpt partitions
1bd87551eb pico-imx6ul: Define partition layout in the environment
6d2499a223 pico-imx6ul: Add boot and rootfs dfu_alt_info
114501165b pico-imx6ul: Use PARTUUID to specify the rootfs location
9a6f8019f6 pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variable
0b20df36bc mx25pdk: Change root to use a single partition layout
2dcd3eeeff pico-imx7d: Enable booting from single partition
d6008b2e1a pico-imx7d: Replace fatload command
7fe81082a3 pico-imx7d: Add support for secure boot
f960fe77df mx6sabre_common: Place video related settings in common code
f4998c99d4 mx6sabre_common: Dynamically change the video output
c3e252e8ca mx6sabresd: Enable video interfaces in bootargs
c94a211847 mx6sabresd: Use LDO dtb file until LDO bypass support is added
3abd094faf mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*Deploy the binary in ls1012a/u-boot/ folder as it is standalone
The ppfe-firmware is a standalone tool, deploy the binary like
other images like u-boot/kernel/rcw.
*fix missing binary in ls1012a/u-boot/ folder
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
43c79c9 - rcw: ls1088aqds: Add RCW PBL_QSPI_1600_700_2100_0x15_0x0d.bin
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
c249f5f - ls1088aqds: Add CONFIG_SGMII_PHYLIB in header file for QDS
64169db - armv8: ls1088: introduce CONFIG_SGMII_PHYLIB
002dc70 - driver: net: ldpaa_eth: Add PHY-less SGMII support
44a294b - drivers: net: ldpaa_eth: Correct error handler for qbman_swp_acquire()
0ca9091 - armv8: fsl-layerscape: Fix MC reserved memory calculation
fbedf04 - armv8: Workaround for USB erratum A-009007 on LS1088A
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*update SRC_URI
*update to 97cd13d
include the following changes:
97cd13d - DNCPE-372 Add ls1012a sbl firmware itb
4089bcf - DNCPE-372 Update binary files
4943138 - DNCPE-372 Update binary files
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
fbedf04 - armv8: Workaround for USB erratum A-009007 on LS1088A
07dce79 - board: freescale: ls1012a: fix RGMII tx delay issue
39bd068 - armv8: ls1088aqds: Change phy mode to PHY_INTERFACE_MODE_RGMII_ID
aad3422 - armv8: configs: ls1012a: correct the generic timer frequency issue
0f0e241 - configs: ls1012a: add pfe configuration for LS1012A
a518a57 - fsl: csu: enable ns access for PFE
d91e382 - armv8: fsl-lsch2: configure pfe's scfg & dcfg registers
99089ae - armv8: fsl-lsch2: add pfe macros and update ccsr_scfg structure
7b2f1c3 - armv8: fsl-lsch2: initialize pfe gemac
f0640ed - board: freescale: ls1012a: enable network support on ls1012a platforms
af5f822 - drivers: net: pfe_eth: LS1012A PFE headers
676ef26 - drivers: net: pfe_eth: provide pfe commands
74b6833 - drivers: net: pfe_eth: LS1012A PFE driver introduction
3ddb3d3 - armv8: fsl-layerscape: Add support of GPIO structure
091c401 - driver: fsl-mc: memset pointers after malloc
4dcd33d - armv8: ls1088a: Update MC boot sequence
2dcba27 - arm64: ls2088ardb: Fix nor fall back option failure
c64ac4c - QE: Set QE_IRAM_READY after uploading firmware
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
6719b04 - Ls1043a: add workaround for pcie errata A-009859
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The runtime provides does need to be changed as it is going to be
handled by the shlib symbol handling during the package
generation. This fixes the package generation of libvpu4 which were
causing rootfs generation errors when using Debian packages.
Reported-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change the git URL to Code Aurora as it mirrors the git.freescale.com.
It also changes the branch name to the matching one.
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change the git URL to Code Aurora as it mirrors the git.freescale.com.
It also changes the branch name to the matching one.
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change the git URL to Code Aurora as it mirrors the git.freescale.com.
It also changes the branch name to the matching one.
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*This includes the following changes:
503eff0 - armv8: ls1046aqds: Fix NAND offset for Fman ucode and env
c66ddf7 - arm64: ls2088ardb: Fix kernel validation failure
44ffe98 - armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot
043c85a - armv8: ls1046ardb: disable PPA loading during SPL stage for SD boot
b68c991 - armv8: fsl-layerscape: Fix some coding style problems in soc.c
25cd705 - board/ls1088: Add fsl_fdt_fixup_flash
85bfc58 - ls1088aqds: Enable IFC and QIXIS in SPL image
96cc4d7 - armv8: fsl-layerscape: Add back L3 flushing for all exception levels
bdf9c1a - fsl-lsch2: csu: correct the workaround A-010315
26aaf13 - armv8/fsl-lsch2: correct QMAN clock
a836f94 - arm64: ls1012ardb: Add distro secure boot support
ef3b345 - arm64: ls1012afrdm: Add distro boot support
2bed40e - arm64: ls1012ardb: Add distro boot support
bb85ef3 - board: common: vid: Move IR chip specific code in flag
806bca8 - board/ls2080ardb: Add mcmemsize variable in default env
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*update to 1a6236a
*This includes the following changes:
1a6236a - LS1012ARDB: Change rcw for secure boot
cdf4b72 - rcw: ls1088aqds: Add SCSI errata for detecttion of sata
16072f7 - armv8:LS1012A: RCW supporting 1GHz CPU frequency
90aef03 - LS1088ARDB:Reduce size in block copy command
53518dc - rcw: ls1088ardb: Add SCSI errata for detecttion of sata
0a869b3 - ls1021a: add workaround for pcie erratum A-007997 and A-007815
e7f18e5 - ls2088ardb: Add RCW for with platform frequency 700MHz
6f324fc - Use BSD license for both rcw and binary files
c69799f - Added copyright to byte_swap.tcl
bfe8c5e - Renaming COPYING as BSD-LICENSE
*update LIC_FILES_CHKSUM to point to LICENSE
Renaming BSD-LICENSE
* add support for Qoriq.
* strip possible '-32b', '-64b' and '-be' to match folder name.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
* ls2-rcw and rcw are duplicated so remove ls2-rcw.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*update SRC_URL and update to 6036a20
includes the following changes:
6036a20 - Add ucode and readme for Cortina 10G PHY
*update license to MIT
*Fix the installation directory
ls2-phy includes one config file.
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes
a812f17 - ls1046ardb: update binary
2d42308 - ls2088ardb: update binary
e8b5d47 - LS2088ardb: update to c1ae7b72
bd59c46 - update binaries for LSDK 1709
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*update to 92b208b
This includes the following changes:
92b208b - Added usb and mmc as wakeup src for LS1088 system suspend; Fixed stack alignment issue.
999e6be - Correcting stack reference issue in LS1088 _soc_sys_entr_pwrdn().
4d43c10 - Adding cpu_suspend.system support to LS1088.
8a2e7ee - Disambiguating uart driver from ddr driver and from dbg builds.
d455113 - Fixing offset into bootcore data area.
87b117e - Moving Chassis defs out of soc.h and into lsch3/lsch2.h.
93f17b3 - Releasing cores from reset that are marked "to be disabled".
2872682 - Fixing ordering problem in makefile.inc which caused builds using earlier than GCC 6.2 to fail.
f52a4a9 - Adding separate folders for each driver; Adding rdb board for LA17xx.
b003ea1 - Adding initial ppa for soc LA17xx.
ce7f372 - Changing secondary core release method to reduce risk of race condition between ppa and bootrom.
78b8281 - Fixing psci data area initialization.
bed0d04 - Eliminating race condition between psci and bootrom on core release.
89ddb56 - Cleanup of prefetch disable function.
8781337 - Fix for QPPA-23: overwriting saved link register in _soc_init_start when bootcore used to initialize ocram.
4ee3738 - Adding header file left out of last commit.
cc33e5e - Adding smc function prefetch disable.
2de51a3 - Changing psci call to _soc_core_rls_wait into a call to _soc_core_release.
12be3c6 - Updating text in license file.
76a61f5 - Added release note deprecating build methods using "make".
*fix the below error:
|Makefile:58: ../armv8/gic.mk: No such file or directory
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
* nxp release will not support ppc machine
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
- As imx-test git repository is public as git://git.freescale.com/imx/imx-test.git,
build it from git.
- Add support to i.MX 6SLL and 7ULP.
- Replace imx-vpu with virtual/imxvpu in DEPNEDS.
- Set PV as 6.0+${SRCPV}
Signed-off-by: Jun Zhu <junzhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
- Add virtual/imxvpu provides for the future VPUs on other SoC.
- Integrate the bug fixes.
Signed-off-by: Jun Zhu <junzhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
- As the imx-lib git repository is public as git.freescale.com/imx/imx-lib.git,
build it from the git.
- Add support to i.MX 6SLL and 7ULP.
- Set PV as 5.8+${SRCPV}
Add the options to support i.MX 6SLL and 7ULP
Signed-off-by: Jun Zhu <junzhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes:
a6a15fedd1 udoo: Remove cpu type check prior to setup_sata()
25aa0ce98a wandboard: Remove cpu type check prior to setup_sata()
6c94a45c23 wandboard: Add support for the MX6QP variant
46800a79b6 mx6slevk: Fix MMC breakage for the SPL target
3760ecfce4 imx: Fix regression with CONFIG_DM_MMC=y
59d4771838 ARM: imx6: Add DHCOM i.MX6 PDK board support
a77a794847 imx: mx7: spl: remove redundant SATA definitionas
fdb70bf620 mx6: sys_proto: Add prototypes for imx6_pcie_toggle() functions
308e7844f8 mx6: clock: Add a prototype for do_mx6_showclocks()
300a095165 i.mx6ul: xpress: update UART init for current board revision
2812798091 mx6slevk: Use PARTUUID to specify the rootfs location
acea9a74c8 drivers: pci: imx: fix imx_pcie_remove function
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Jun Zhu <junzhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
C.R. Guo
texierp
Otavio Salvador
Daiane Angolini
Jun Zhu