aboutsummaryrefslogtreecommitdiffstats
path: root/recipes-bsp/u-boot
AgeCommit message (Collapse)Author
2019-01-14u-boot-qoriq: Upgrade version to 2018.09Chunrong Guo
*update to lsdk 1812 tag include the following changes c08de7c - SecureBoot_LX2160A: Correct the kernel header offset. 619d0d3 - ls2080ardb: check enablement of QSPI using DCFG_RCWSR15 0dfcc1f - ls1088a: Update the device tree for IFC/QSPI 8875034 - net/phy: Cortina CS4223 driver updates & bugfixes 88fa585 - mmc: fsl_esdhc: make get_cd work well in dm_mmc_ops 2211378 - Revert "pci: layerscape: Add the dts fixup for EP and RC" f8358cf - armv8: fsl-layerscape: properly configure qdma ICID f24e259 - lx2160: Enable support of EMC2305 1a858e3 - armv8: emc2305: add support for fan controller f37025a - fsl-ls2088ardb: dts: enabling SATA node ff3e128 - board/ls1046aqds: Bypass xfi port fixup for KR mode on LS1046AQDS 2c3c67e - armv8: ls2088ardb: change default device tree in defconfig for TFABOOT 7f79b25 - armv8: ls1088aqds: add support for ifc-nor boot for TFABOOT c1b55a8 - detect ifc-nor flash at run-time 6c99ca4 - pci: layerscape: Add the dts fixup for EP and RC ccfc35d - pci: layerscape: Do not scan when PEX work in EP mode dd167bc - pci: layerscape: Modify the EP and RC mode judge method 26defec - armv8,lx2160a: Initialize ethernet array in serdes_init 2851185 - armv8: lx2160a: Update CONFIG_SYS_FSL_PEBUF_BASE cce8348 - board/ls2088ardb: Update the device tree for IFC/QSPI 830ac80 - Correct QSPI bootcommand for LS2088 TFA boot 899e696 - ls2088ardb: add QSPI support for TFA-BOOT a9fb32b - ls1043a: add support for nand-boot cmd for TFA c2b3374 - arm64: lx2160ardb: enable DM support for sata 0f80b76 - armv8: dts: fsl-lx2160a: add sata node support a10b3fc - board/lx2160a: Update xspi_bootcmd, sd_bootcmd env ee09465 - armv8:LX2160: Adds distro secure boot support. 9a7d1e0 - drivers/spi: Disable hybrid mode for SPANSION S25FS-S family 6b04587 - drivers/spi: Introduce functions to read/write any register a748abd - fsl_qspi: Modify handling of RDAR, WRAR, 4K_ERASE commands 2af4cbd - armv8: lx2160a: Modify dspi1 controller intrrupts property 612bc35 - Enable sata configs to Kconfig for all LayerScape boards 358229b - armv8: ls1043aqds: modify the qspi_bootcmd definition Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
2018-12-13u-boot-imx: Deploy boot image generation tools for i.MX 8MTom Hochstein
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
2018-12-03u-boot-fslc: Bump to 6e25ce6f3c revisionOtavio Salvador
This includes following fixes: 6e25ce6f3c pico-imx7d: Increase the CONFIG_ENV_OFFSET size Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-11-30u-boot-fslc-mxsboot: When building target recipe, limit it to fsl machinesKhem Raj
The latest updates observed that the target recipe is building for qemu machines as well, which is not useful. see http://errors.yoctoproject.org/Errors/Details/202502/ Signed-off-by: Khem Raj <raj.khem@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-11-27u-boot-fslc: Upgrade to 2018.11-based forkOtavio Salvador
This upgrade our fork to the current stable release. It got most of our patches merged and now it has a very small set which are basically Yocto Project specific stuff. Still applied patches are: 1f39b911b7 mx25pdk: Change root to use a single partition layout a0f8bec9d3 mx6sabre_common: Dynamically change the video output 7847536319 mx6sabresd: Enable video interfaces in bootargs 994d8e0733 mx6sabresd: Use LDO dtb file until LDO bypass support is added c6c87fb39b mx6slevk: Use LDO dtb file until LDO bypass support is added Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-10-26u-boot-qoriq: Add recipe fw-utilsJoris Offouga
Initial support for fw utils for qoriq Signed-off-by: Joris Offouga <offougajoris@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-10-26u-boot-qoriq: use a u-boot-qoriq-common includeJoris Offouga
Use a common file to make easier update, maintain and create others U-Boot recipes like U-Boot fw-utils. Signed-off-by: Joris Offouga <offougajoris@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-10-04u-boot-fslc: Avoid restricting parsing for 'imx'Otavio Salvador
The u-boot-fslc does not amend other machines and then cannot be seen as something that poison other BSP. Adding the restriction to the common file makes all native tools incompatible. Fixes: ,---- | [imx23evk] ERROR: Nothing PROVIDES 'u-boot-mxsboot-native' | [imx23evk] u-boot-fslc-mxsboot-native PROVIDES u-boot-mxsboot-native | but was skipped: incompatible with machine imx23evk (not in | COMPATIBLE_MACHINE) `---- Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-10-01u-boot-imx: Update to L4.9.123-2.3.0_8mm_ga releaseYuqing Zhu
Signed-off-by: Yuqing Zhu <carol.zhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-10-01uboot: update to 1e96fd8Chunrong Guo
*update to lsdk 1809 tag include the following changes: 1e96fd8 - ls2080ardb: remove dhcp function from u-boot env as boot source 5c03a79 - ls1088a: remove dhcp function from u-boot env as boot source 6f5dc2c - ls1012a: remove debug info from u-boot log. fa2d088 - ls1088ardb_pb: Secure boot: Change bootscript and header name 13bedc9 - driver: net: fsl-mc: Memset MC reserve ram memory before usage 165c98a - Revert "driver: net: fsl-mc: Memset MC reserve red memory before usage" e0a7cda - Revert "armv8: fsl-layerscape: add missing register blocks base address defines" cb9edfa - Revert "armv8: ls1046a: advertise QMan v3 in configuration" 19528d0 - Revert "misc: fsl_portals: setup QMAN_BAR{E} also on ARM platforms" e3b589b - Revert "armv8: fsl-layerscape: add missing debug stream ID" 342682e - Revert "armv8: ls1046a: initial icid setup support" 0a725a4 - Revert "armv8: ls1046a: add icid setup for qman portals" 2f59bf6 - Revert "armv8: ls1046a: setup fman ports ICIDs and device tree" 5c872b4 - Revert "armv8: ls1046a: setup SEC ICIDs and fix up device tree" 9f304d2 - Revert "armv8: ls1043a: advertise QMan v3 in configuration" 4648116 - Revert "armv8: ls1043a: add icid setup support" 6624809 - Revert "armv8: icid: fix 'set_icids' call" 52b9297 - ls1088ardb_pb: Add SD boot support. ad074ad - driver: net: fsl-mc: Memset MC reserve red memory before usage 5c50f5a - armv8: layerscape: fix compilation warning 'unused ns_dev' a654fcc - ls1012afrwy: Add ls1012afrwy revC board support. 69a7e63 - armv7: ls102xa: Disable QE before enter deep sleep db1990f - arm: layerscape: Remove CONFIG_U_QE define in ls1012atwr.h e1f8fe0 - qe: kconfig: U QE kconfig 6584582 - ls1088ardb_pb: remove sd u-boot support. 960ae1e - armv8: icid: fix 'set_icids' call 7402171 - ls1088ardb_pb: Add support for ls1088ardb_pb board. dd5ae4b - armv8: ls1043a: add icid setup support e9b0593 - armv8: ls1043a: advertise QMan v3 in configuration 4c762cf - armv8: ls1046a: setup SEC ICIDs and fix up device tree 1719ffd - armv8: ls1046a: setup fman ports ICIDs and device tree 82327f1 - armv8: ls1046a: add icid setup for qman portals dbcacdc - armv8: ls1046a: initial icid setup support 1b86306 - armv8: fsl-layerscape: add missing debug stream ID 6b1519e - misc: fsl_portals: setup QMAN_BAR{E} also on ARM platforms 64e4333 - armv8: ls1046a: advertise QMan v3 in configuration c986803 - armv8: fsl-layerscape: add missing register blocks base address defines Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-28recipes: Limit BSP specific recipes on relevant SOCsKhem Raj
This helps in using meta-freescale with other BSP layers in same projects, which is common usecase Signed-off-by: Khem Raj <raj.khem@gmail.com> Cc: Andreas Müller <schnitzeltony@gmail.com> Cc: Zhenhua Luo <zhenhua.luo@nxp.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-26u-boot-fslc-mxsboot: Add bison-native to build dependsOtavio Salvador
Fixes: | bison -oscripts/kconfig/zconf.tab.c -t -l scripts/kconfig/zconf.y | /bin/sh: bison: command not found | make[1]: *** [scripts/Makefile.lib:228: scripts/kconfig/zconf.tab.c] | Error 127 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-15u-boot-fslc: Upgrade to 2018.09-based forkOtavio Salvador
This updates the fork to current 2018.09 release and apply following changes on top: 62f2841dc4 pico-imx6ul: Add instructions for booting in Falcon mode a803c01c03 pico-imx6ul: Add Falcon mode support 3e5f58a2a4 wandboard: README: Include the mx6qp variant in the list 28b8458749 imx: imx6ull: fix pinmux input_val for uart5 rx pin 1bc802f9cc pico-imx6ul: Remove CONFIG_FSL_USDHC from .h cc97092f7c pico-imx6ul: Add new pico-hobbit config 11aaa94cd8 pico-imx6ul: Sync README with pico-imx7d 52723c960f pico-imx6ul: Improve default DFU settings c90fa9c1a2 pico-imx6ul: Add bootmenu to choose the baseboard 2141bc7952 pico-imx6ul: Sync defconfig with new changes 9ff1d5305d pico-imx6ul: Update the README file 2b0e81461c pico-imx6ul: Add support for the 512MB module e45ab0b309 pico-imx6ul: Add bmode support ad3c1b13d8 pico-imx6ul: Add fastboot support fa2c10bbac pico-imx6ul: Convert to SPL b143e3f027 pico-imx6ul: Convert to distro config a9c45f15b2 mx6sabre_common: Allow the videoargs to be passed to bootargs b584b845b1 mx25pdk: Change root to use a single partition layout 146e490814 mx6sabre_common: Dynamically change the video output a278950282 mx6sabresd: Enable video interfaces in bootargs 77cac8a16e mx6sabresd: Use LDO dtb file until LDO bypass support is added be4d1c4100 mx6slevk: Use LDO dtb file until LDO bypass support is added Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-09-08u-boot-imx: Add support for i.MX 8QM, 8MQ, and 8QXPTom Hochstein
Signed-off-by: Tom Hochstein <tom.hochstein@nxp.com>
2018-08-30u-boot-fslc: Bump revision to 1e13b91aOtavio Salvador
1e13b91af7 mx6sabre_common: Allow the videoargs to be passed to bootargs Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-08-30u-boot-fslc: Add bison-native dependency for 2018.07Daiane Angolini
The u-boot-fslc now depends on bison to complete the build. This patch fixes the following error message: | rm -f .tmp_quiet_recordmcount | make -f /home/daiane/code/yocto/master/build/tmp/work/imx7dsabresd-fslc-linux-gnueabi/u-boot-fslc/v2018.07+gitAUTOINC+bc558729a7-r0/git/scripts/Makefile.build obj=scripts/kconfig mx7dsabresd_config | bison -oscripts/kconfig/zconf.tab.c -t -l /home/daiane/code/yocto/master/build/tmp/work/imx7dsabresd-fslc-linux-gnueabi/u-boot-fslc/v2018.07+gitAUTOINC+bc558729a7-r0/git/scripts/kconfig/zconf.y | /bin/sh: 1: bison: not found | scripts/Makefile.lib:228: recipe for target 'scripts/kconfig/zconf.tab.c' failed | make[2]: *** [scripts/kconfig/zconf.tab.c] Error 12 Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-30dtc-145: Deploy renamed binary only and add new classMax Krummenacher
dtc-145-native is used by older U-Boot recipes. U-Boot only depends on the native dtc binary. So, to not clash with files from the regular dtc native build do only install the dtc binary renamed to dtc-145. Also, create a new class to handle with dtc-145 dependency. Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
2018-07-11u-boot-fslc: Update to 2018.07-based forkOtavio Salvador
This updates the fork on top of current 2018.07 release and also adds a much improved support to pico-imx7d and pico-imx6ul. The list of commits included are: bc558729a7 warp7: update defconfig to support the generic loading interface e5a6138278 mx25pdk: Change root to use a single partition layout f9d1e13cf5 mx6sabre_common: Dynamically change the video output 865268ce8a mx6sabresd: Enable video interfaces in bootargs 7db6f3d8c5 mx6sabresd: Use LDO dtb file until LDO bypass support is added 84fc5b0de1 mx6slevk: Use LDO dtb file until LDO bypass support is added ccf16e75e7 pico-imx6ul: Convert to distro config 06eecc42a2 configs/imx: Remove 'mmcautodect' variable 12c65ae7a9 pico-imx7d: Add new pico-pi config fe4fd4e1ea pico-imx7d: README: Drop old instructions about secure mode a076cc293b pico-imx7d: README: Use dfu-util to flash U-Boot 24f9fcde47 pico-imx7d: Enable auxiliary code support 78fead0843 pico-imx7d: Allow default fdtfile to be overridden by defconfig 04d0d8894f pico-imx7d: Do not override addrmap5 e5833f48e6 pico-imx7d: Enable CONFIG_ARMV7_BOOT_SEC_DEFAULT ceb9087434 pico-imx7d: Add Falcon mode support 8800626580 pico-imx7d: Add bootmenu to choose the baseboard f2c33216e7 pico-imx7d: Add support for update SPL using DFU 6cc975154d pico-imx7d: Add SPL support 349985a0f2 pico-imx7d: Add fastboot support 76a4da5eb1 pico-imx7d: Add default DFU targets c6c4a0e0d8 pico-imx7d: Add GPT partitioning support 9ac7204c7a pico-imx7d: Fix common distro configuration behavior 62523103a0 pico-imx7d: Convert to distro config Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-07-02u-boot-qoriq: udpate to version 2018.03Chunrong Guo
Following changes are included: 11abda9 - armv8: ls2080ardb: update copyright claim 7d5b814 - Revert "EHCI: Fix endian access issue on EHCI intinalization" 160deab - Revert "powerpc/T104xRDB: Fix endian access issue on EHCI intinalization" 007ac5c - Revert "powerpc/p1_p2_rdb_pc: Fix endian access issue on EHCI intinalization" e82a7bc - LS1043ARBD: Fix SD Boot issue with PPA ec7f4b3 - armv8: ls1088a: change dpl load address to 0x80001000 from 0x80000000 93bb79f - board: freescale: ls1012afrwy: Add LS1012A-FRWY board support. aabf70f - board: freescale: ls1012afrx:Common files to support da97a2b - watchdog: disable to build the driver in default 60afe56 - watchdog: Kconfig: add config to disable wdog reset cf17a12 - watchdog: driver support for layerscape 6ac9ac0 - armv8: ls1088: change ttyS1 to ttyS0 0c9305b - boards: freescale: lsch3: Add 0.9v entry for vid 0346460 - armv8: ls1088a: change dpl load command from apply to lazyapply. c43f05a - drivers/net/vsc9953: Initialize action RAM in VCAP complex 0a1adba - board: Kconfig: Re-Arrangement of PPA firmware and header addresses ecf1d55 - arm: ls1021aqds: config: enable CONFIG_ID_EEPROM for mac command 4d94f28 - board: freescale: ls1012ardb: Add command to switch QSPI bank cba0675 - driver/mtd/spi: Default page size Spansion flash "S25FS512S" is 256b 7c4f3c8 - LS1012AFRWY: Add Secure Boot support 51a93cc - board: move ppa header address in board specific kconfig e26f485 - board: ls1012a: FRWY-LS1012A board support d000b14 - board: move ppa firmware address in board specific kconfig 2f51b35 - armv8: ls1088a: Enable USB in ls1088ardb_sdcard_qspi_SECURE_BOOT_defconfig 842df34 - armv8/fsl-lsch2: make the workaround for PIN MUX erratum A010539 robust 1fa9417 - armv8: sec_firmware: Add support for multiple loadables eca9656 - armv8/fsl-lsch2: correct QMAN clock c3a6ed4 - driver: net: fsl-mc: updated copyright info 39966d9 - armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig ccde7d9 - armv8: ls1088aqds: Enable mdio commands on u-boot prompt 9c912c7 - armv8: sec_firmware: Remove JR3 from device tree node in all cases 5ecc2f5 - mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled 8ed20db - usb: Add delay to fix USB 2.0 stick enumeration failure on LS208xA b133620 - EHCI: Fix endian access issue on EHCI intinalization faf6feb - u-boot: fixup the iommu-map property of fsl-mc node 8e0c780 - powerpc: configs: Set initrd_high environment varible Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-06-26dtc: Add recipe for version 1.4.5Fabio Berton
We need dtc version 1.4.5 to build u-boot-imx 2017.03, current version 1.4.6 raise a lot of errors and can't build older U-Boot version. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
2018-06-26u-boot-imx: Update to branch imx_v2017.03_4.9.88_2.0.0_gaFabio Berton
- Update to latest stable branch - Add O.S. Systems Software Copyright Signed-off-by: Otavio Salvador <otavio@ossystems.com.br> Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
2018-06-11u-boot-fslc: Update to a092fb1504 revisionOtavio Salvador
Following changes are included: a092fb1504 spl: Add default values for ARCH_MX7 17ee0afbc7 wandboard: Remove hardcoded baudrate from "console" variable a9cd19f296 pico-imx7d: Adjust the dtb name Change-Id: If3c37fb22924dbd7489c188ff45dd590224e255c Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-06-05u-boot-fslc: Update to 2018.05-based final releaseOtavio Salvador
The revision used was of a pre-release and we ought to instead point to the current final release. Fixup it. Change-Id: Ic1ff8641a3b1d135610b51b5051c2974daf9d88c Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-06-01u-boot-fslc: Upgrade to 2018.05-based forkOtavio Salvador
This upgrades the fork for the latest stable release. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-04-26u-boot-fslc-mxsboot: Add dtc as build dependencyOtavio Salvador
The dtc must be available during build time. It fixes a build error when host does not have it installed and we are building a native variant. Change-Id: I3a64d40575bce9ae4289a419ea8892fe006b7de6 Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-04-25u-boot-qoriq: support big endianChunrong Guo
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-04-02u-boot-qoriq: update toC.R. Guo
*include the following changes: 00cde47 - driver: net: fsl-mc: remove usage of CONFIG_FSL_MC_ENET a2d3f26 - powerpc: configs: Set initrd_high environment varible cab48d3 - armv8: ls1043ardb_sdcard: delete CONFIG_SPL_FSL_LS_PPA 6f8b6dd - mmc: fsl_esdhc: fix probe issue without CONFIG_BLK enabled 03560b1 - armv8: sec_firmware: Remove JR3 from device tree node in all cases 123ee86 - ls1088a: qspi: Enable XIP mode above 16 MB addresses eb3ddd0 - PowerPC: phy: enable all phylib drivers when use phylib and tsec enet 2efee07 - ls2081a: qspi: Enable config to write aligned data to TxFIFO b32402c - ls2088a: qspi: Enable config to write aligned data to TxFIFO e7f0b4a - ls2080a: qspi: Enable config to write aligned data to TxFIFO 1c693ab - ls1088a: qspi: Enable config to write aligned data to TxFIFO edcb0a5 - Kconfig: qspi: Add SPI_ALIGNED_TXFIFO config details c6a9fe0 - qspi: Add code to send only aligned data to TxFIFO 1f13780 - ls1088a: Moving CONFIG_FSL_QSPI to defconfig 4cbef43 - EHCI: Fix endian access issue on EHCI intinalization 901ad16 - ARMv8: ls1046a: Enable PCIe and E1000 in lpuart defconfig 7340b38 - armv8: ls1088: Add CONFIG_SPI_FLASH_SPANSION to sdcard defconfigs a17a22d - armv8: ls1088a: Move CONFIG_BOOTARGS and CONFIG_CMD_GREPENV to defconfig 226adb1 - armv8: ls1088: Add qixis offsets for lbmap and rcw_src 71fed5f - fsl: common :qixis: Add ifc and emmc switch support in qixis 2705761 - board:ls1012a2g5rdb: define PFE firmware address in kconfig ec53bd9 - board: ls1012a: update mdio, phy parameters based on serdes protocol cce1563 - board: ls1012a2g5rdb: avoid phy reset 621dd47 - dm: pci: change bus number register setting compliant with Linux f5285a8 - armv8: ls1088ardb: secure boot: Use tiny printf to save spl size a6932b4 - armv8: ls1088a: vid: Add some function in SPL for VID adc2721 - ls1088a: Add VID support for QDS and RDB platforms 318f7c4 - common: board_f: vid: Add VID specific API to adjust core voltage d0d1638 - ls1088a: ddr: configure DDR for 0.9v for VID support 55540f3 - ddr: fsl: set cdr1 first in case 0.9v VDD is enabled for some SoCs 2586b3a - board: common: vid: Add support for LTC3882 voltage regulator chip dfbc0d1 - Kconfig: Add LTC3882 voltage regulator config f5f238d - board: common: vid: Move IR chip specific code in flag 094c483 - board: common: vid: Add board specific vdd adjust API 9d25d53 - board: common:vid: Add LS1088A VID Supported voltage values fe1dc63 - armv8: lsch3: Add serdes and DDR voltage setup Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-04-02u-boot-fslc: bump revision to a07698ftexierp
This includes the following change: a631182 warp7: update defconfig to support the generic loading interface Signed-off-by: Pierre-Jean TEXIER <texier.pj2@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-03-06u-boot-qoriq: update SRC_URLC.R. Guo
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-02-21u-boot-fslc-fw-utils: add u-boot-fw-utils to PROVIDEStexierp
Without this, bitbake use the default one, and not "u-boot-fslc-fw-utils". This was observed when layer is used together with poky (with Mender). Signed-off-by: Pierre-Jean TEXIER <texier.pj2@gmail.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-01-26classes/recipes: Convert SkipPackage -> SkipRecipeChunrong Guo
The new name is much more consistent with what this actually means. We put the pieces in place to rename everything a while back but looks like we forgot to actually do it! Fix that now. Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2018-01-25u-boot-qoriq: update to 2017.12Chunrong Guo
*include the following changes: 9f7df1b - env: sf:Enable environmnet varibale before relocation 840a903 - board/ls2080a, ls1088a: Add check for mc-dpl applied in fdt 208b0b6 - armv8: ls1088 : MC alignment should always be fixed to 512MB 6dd3af0 - ls1012a:dts: Correct LS1012A-2G5RDB device tree d7ca121 - armv8: layerscape: Discard the needless cpu nodes 69620c9 - armv8: ls1043a/ls2080a: check SoC by device ID 196d773 - armv8: ls1088ardb: support force SDHC mode by hwconfig 68218ae - LS1012ARDB Secure Boot: Add encapsulation support 90a096f - armv8: ls1046aqds: update IFC NOR timings 212917d - drivers: net: pfe_eth: Disable autonegotiation for 2.5G SGMII 77c795d - board: freescale: ls1012a: LS1012A-2G5RDB board support 51c350b - armv8/kconfig: Align boards of same family at one place 6adcdca - driver: fsl-mc: MC object cleanup when DPL not loaded 4b02c65 - powerpc/p1_p2_rdb_pc: Fix endian access issue on EHCI intinalization bbc95ad - powerpc/T104xRDB: Fix endian access issue on EHCI intinalization 5857001 - boards: ls1046ardb: disable unavailable "ethernet" node in dts 86682f0 - arm: Add support of updating dts before fix-up df8d00c - common: Fix-up MAC addr in dts by fetching env variable serially 75045a7 - fsl-qbman: Include missing function prototype 269953a - driver: net: fsl-mc: flib changes for MC 10.3.0 813486a - drivers: net: pfe_eth: remove unused code under CONFIG_PFE_WARN_WA fdf2bf4 - drivers: net: pfe_eth: remove unused code under CONFIG_UTIL_PE_DISABLED 44c39f0 - drivers: net: pfe_eth: cleanup typos and indent 5dc8c93 - drivers: net: pfe_eth: use writel/readl to access hw bds 8dc0a63 - drivers: net: pfe_eth: add pfe_rx_done to clear bd after packet processing 85a3451 - usb: Add delay to fix USB 2.0 stick enumeration failure on LS208xA 139ec62 - Revert "armv8: ls1088a: correct pcie fixup compatible string" 7bd0db8 - SECURE BOOT: Add SD fall back option 2068345 - cmd: mac: Update description of help b040e4a - armv8: fsl-layerscape: Add support of disabling core prefetch f53d786 - armv8: fsl-layerscape: Allocate Secure memory from first ddr region 8e9a95e - u-boot: fixup the iommu-map property of fsl-mc node a95797b - armv7: ls1021a: Fix marco CONFIG_LS102XA c249f5f - ls1088aqds: Add CONFIG_SGMII_PHYLIB in header file for QDS 64169db - armv8: ls1088: introduce CONFIG_SGMII_PHYLIB 002dc70 - driver: net: ldpaa_eth: Add PHY-less SGMII support 44a294b - drivers: net: ldpaa_eth: Correct error handler for qbman_swp_acquire() 0ca9091 - armv8: fsl-layerscape: Fix MC reserved memory calculation Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-11-30u-boot-fslc-fw-utils: Fix buildOtavio Salvador
There was a wrong include of u-boot.inc on this recipe which were causing build errors, also it was using the old target to build the environment tools. Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-11-29u-boot-fslc: Upgrade to 2017.11-based forkOtavio Salvador
This includes following changes on top of 2017.11 tag: ca0c3f3fac configs: icore-rqs: Enable falcon mode c39e5ad9ad engicam: imx6q: Return mmc dev 0 for icore 7953884755 i.MX6: engicam: Add imx6q/imx6ul boards for existing boards 924ac4a9ac board: icore-rqs: Fix mmc get env device 1caace2d74 i.MX6UL: icore: Add SPL_OF_CONTROL support 655f153b7c pinctrl: imx6ul: Fix pinctrl data overlapped with DT area 735b8429cf i.MX6Q: icore: Add SPL_OF_CONTROL support e2aee01772 i.MX6Q: icorem6: Move spl load fit to common/spl 7265424b4b i.MX6: engicam: Move set_fdt_file to common 676484d0f5 mx6sxsabresd: Use PARTUUID to specify the rootfs location c685436fb6 imx: Remove boolean parameter from wdog powerdown function dfd399d4b2 imx: Also clear powerdown enable bit for WDOG3 on i.MX6ULL 21e5b103ee mx6ull: Fix WDOG3 base address 28a06c12ca envtools: make sure version/timestamp header file are available 5a3afcb579 mx6sabreauto: Remove unneeded SPL selection a80c8e3c7a mx6: Select MX6QDL option via Kconfig 7c9d795887 mx53: Add Board support for GE PPD a7dbf3c3a4 board: ge: make VPD code common fd7ab796b5 rtc: add support for s35392a efc51f73e3 bootcount: add support for bootcounter on EXT filesystem 8b0c1c4d23 arm: mx5: Add more register definitions 29e5e9df46 pwm: imx: Enable PWM support on i.MX53 02cc3e8037 ext4: recover from filesystem corruption when reading 4c530ec27c imx: mxc_i2c: tweak the i2c transfer method 87d4563bbd Revert "wandboard: Remove unnecessary delay" 913c93d432 pico-imx6ul: Use FS_GENERIC load command bd7c72d0e2 pico-imx6ul: Add function to create gpt partitions 1bd87551eb pico-imx6ul: Define partition layout in the environment 6d2499a223 pico-imx6ul: Add boot and rootfs dfu_alt_info 114501165b pico-imx6ul: Use PARTUUID to specify the rootfs location 9a6f8019f6 pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variable 0b20df36bc mx25pdk: Change root to use a single partition layout 2dcd3eeeff pico-imx7d: Enable booting from single partition d6008b2e1a pico-imx7d: Replace fatload command 7fe81082a3 pico-imx7d: Add support for secure boot f960fe77df mx6sabre_common: Place video related settings in common code f4998c99d4 mx6sabre_common: Dynamically change the video output c3e252e8ca mx6sabresd: Enable video interfaces in bootargs c94a211847 mx6sabresd: Use LDO dtb file until LDO bypass support is added 3abd094faf mx6slevk: Use LDO dtb file until LDO bypass support is added Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-11-10u-boot-qoriq: update to c249f5fChunrong Guo
c249f5f - ls1088aqds: Add CONFIG_SGMII_PHYLIB in header file for QDS 64169db - armv8: ls1088: introduce CONFIG_SGMII_PHYLIB 002dc70 - driver: net: ldpaa_eth: Add PHY-less SGMII support 44a294b - drivers: net: ldpaa_eth: Correct error handler for qbman_swp_acquire() 0ca9091 - armv8: fsl-layerscape: Fix MC reserved memory calculation fbedf04 - armv8: Workaround for USB erratum A-009007 on LS1088A Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-11-06uboot : update to fbedf04Chunrong Guo
*include the following changes: fbedf04 - armv8: Workaround for USB erratum A-009007 on LS1088A 07dce79 - board: freescale: ls1012a: fix RGMII tx delay issue 39bd068 - armv8: ls1088aqds: Change phy mode to PHY_INTERFACE_MODE_RGMII_ID aad3422 - armv8: configs: ls1012a: correct the generic timer frequency issue 0f0e241 - configs: ls1012a: add pfe configuration for LS1012A a518a57 - fsl: csu: enable ns access for PFE d91e382 - armv8: fsl-lsch2: configure pfe's scfg & dcfg registers 99089ae - armv8: fsl-lsch2: add pfe macros and update ccsr_scfg structure 7b2f1c3 - armv8: fsl-lsch2: initialize pfe gemac f0640ed - board: freescale: ls1012a: enable network support on ls1012a platforms af5f822 - drivers: net: pfe_eth: LS1012A PFE headers 676ef26 - drivers: net: pfe_eth: provide pfe commands 74b6833 - drivers: net: pfe_eth: LS1012A PFE driver introduction 3ddb3d3 - armv8: fsl-layerscape: Add support of GPIO structure 091c401 - driver: fsl-mc: memset pointers after malloc 4dcd33d - armv8: ls1088a: Update MC boot sequence 2dcba27 - arm64: ls2088ardb: Fix nor fall back option failure c64ac4c - QE: Set QE_IRAM_READY after uploading firmware Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-28u-boot-imx: Change git repository URLDaiane Angolini
Change the git URL to Code Aurora as it mirrors the git.freescale.com. It also changes the branch name to the matching one. Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-18uboot: upgrade to 2017.09Chunrong Guo
*This includes the following changes: 503eff0 - armv8: ls1046aqds: Fix NAND offset for Fman ucode and env c66ddf7 - arm64: ls2088ardb: Fix kernel validation failure 44ffe98 - armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot 043c85a - armv8: ls1046ardb: disable PPA loading during SPL stage for SD boot b68c991 - armv8: fsl-layerscape: Fix some coding style problems in soc.c 25cd705 - board/ls1088: Add fsl_fdt_fixup_flash 85bfc58 - ls1088aqds: Enable IFC and QIXIS in SPL image 96cc4d7 - armv8: fsl-layerscape: Add back L3 flushing for all exception levels bdf9c1a - fsl-lsch2: csu: correct the workaround A-010315 26aaf13 - armv8/fsl-lsch2: correct QMAN clock a836f94 - arm64: ls1012ardb: Add distro secure boot support ef3b345 - arm64: ls1012afrdm: Add distro boot support 2bed40e - arm64: ls1012ardb: Add distro boot support bb85ef3 - board: common: vid: Move IR chip specific code in flag 806bca8 - board/ls2080ardb: Add mcmemsize variable in default env Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-16u-boot-fslc: Bump to a6a15fedd1 revisionOtavio Salvador
This includes following changes: a6a15fedd1 udoo: Remove cpu type check prior to setup_sata() 25aa0ce98a wandboard: Remove cpu type check prior to setup_sata() 6c94a45c23 wandboard: Add support for the MX6QP variant 46800a79b6 mx6slevk: Fix MMC breakage for the SPL target 3760ecfce4 imx: Fix regression with CONFIG_DM_MMC=y 59d4771838 ARM: imx6: Add DHCOM i.MX6 PDK board support a77a794847 imx: mx7: spl: remove redundant SATA definitionas fdb70bf620 mx6: sys_proto: Add prototypes for imx6_pcie_toggle() functions 308e7844f8 mx6: clock: Add a prototype for do_mx6_showclocks() 300a095165 i.mx6ul: xpress: update UART init for current board revision 2812798091 mx6slevk: Use PARTUUID to specify the rootfs location acea9a74c8 drivers: pci: imx: fix imx_pcie_remove function Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-11u-boot-imx: Upgrade to v2017.03Jun Zhu
Signed-off-by: Jun Zhu <junzhu@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-06u-boot-fslc-mxsboot: Rework recipe to build with U-Boot 2017.09Fabio Berton
- Use the same EXTRA_OEMAKE and do_compile task that u-boot-mkimage from OE-Core - Rework do_install task - Recipe depends only of openssl, no need to append DEPENDS variable Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-06u-boot-fslc-fw-utils: Require recipes-bsp/u-boot/u-boot.incFabio Berton
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-06u-boot-fslc: Add specific bits for u-boot-fslc onlyFabio Berton
- u-boot-msxboot doesn't use recipes-bsp/u-boot/u-boot.inc, so require this file only in recipes that use it. - Compatible machine and package arch are needed only for u-boot-fslc, once u-boot-fw-utils has cross class and u-boot-mxsboot has native class. - Add description in u-boot-fslc recipe - Drop unused depends for mxs. We don't need to use elftosb, mkimage can generate an BootStream for i.MX23 and i.MX28. See u-boot-fslc commit 6654f33c9b520bd4073c7f82a13044e79bc1489. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-05u-boot-fslc: Bump to revision 977c60b153Otavio Salvador
This includes the following changes: 977c60b153 Revert "wandboard: Set fdt based on board_rev and board_name" e439122438 wandboard: Add support for the latest revd1 revision ada0d28cb4 doc: update imx_usb_loader URL Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-04u-boot-fslc: Bump revision to 0edf2007c6Fabio Berton
This includes the following changes: - 0edf2007c6 arm: imx7d: add support for Compulab cl-som-imx7 - f62d34202d imx: mx7: SPL support for i.MX7 - b4ee050163 imx: mx7: DDR controller configuration for the i.MX7 architecture - 9ad01a2efb imx: mx7: fix the CCM_ macros - 23a60cfbec icorem6_rqs: env: Return mmc devno - 4a8723b299 icore: configs: Fix merge conflict issue - 48e0c40604 topic_miami: Remove CONFIG_CMD_BOOTZ undef - 19cdefc994 mx6sabresd: Include <usb/ehci-ci.h> header file - 9b1dd35df2 usb: ehci-ci: Add a prototype for board_ehci_power() - 23e7d7d1c6 mx6sabresd: Include <asm/mach-imx/spi.h> header file - 916afc51de mx6: soc: Include <asm/bootm.h> header file - fc7dc87a9f mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig - 96fd173ca1 imx: sys_proto: Add a prototype for board_mmc_get_env_dev() - e6e4db4473 imx: Include <input.h> header file - cbc14ee959 mx6: toradex: Remove custom CONFIG_SPL_PAD_TO definition - c6cbcda3de README.imx6: Prefer loading SPL via the new SDP mechanism - d327aab07f mx53loco: Let CONFIG_DISPLAY_CPUINFO be selected Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-04u-boot-fslc-fw-utils: Add recipe for version 2017.09Fabio Berton
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-10-04u-boot-fslc: Create u-boot-fslc-common include fileFabio Berton
Use a common file to make easier update, maintain and create others U-Boot recipes like U-Boot fw-utils. Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-09-29u-boot-fslc: Bump revision to 9f164a1a01Otavio Salvador
This includes following changes: 9f164a1a01 mx25pdk: Change root to use a single partition layout 642e1ec971 mx25pdk: Remove duplicated define bb8bb2c1bd mx25pdk: Use generic filesystem commands a3581b705a imx6: disable clock command and print_cpuinfo code in SPL 555c0086e6 colibri_imx6: Avoid calling setup_display() from SPL code 0985fc630b apalis_imx6: Avoid calling setup_display() from SPL code a01e041d10 mx6cuboxi: Avoid calling setup_display() from SPL code 939d30becd wandboard: Avoid calling setup_display() from SPL code 025f356829 cgtqmx6eval: Avoid calling setup_display() from SPL code 3cfa1bd347 mx6sabresd: Avoid calling setup_display() from SPL code 6d9b99b923 mx6sabresd: Add Serial Download Protocol support 3766ef9cea toradex: imx6: Move g_dnl_bind_fixup() into common SPL code da4a0fd824 board: ge: bx50v3: set eth0 MAC address 5e57f55125 detect and setup solidrun hummingboard2 35e7f4f0aa imx6: drop duplicated bss memset and board_init_r() call 72066ea7f5 pico-imx7d: Add "how to boot with NXP 4.1 Kernel" 58cb0bc9f0 imx: imx7d: remove CamelCase from ENET_xMHz macros 2df17bffbc imx_common: detect USB serial downloader reliably 5615ed0835 imx: add macro to detect whether USB PHY is active Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-09-21u-boot-fslc: Bump revision to ed4d1d9Vanessa Maegima
This includes the following changes: ed4d1d9 Merge pull request #20 from vanmaegima/2017.09+fslc 114483a pico-imx7d: Enable booting from single partition 85cdf96 pico-imx7d: Replace fatload command Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
2017-09-12u-boot-fslc: Upgrade to 2017.09 releaseFabio Berton
This commit merge tag v2017.09 and apply the following commits on top of it: - e4a4d913e9 ipu_common: Let the MX6 IPU clock be calculated in run-time - 57ea8c60e4 pico-imx7d: Add support for secure boot - c5ad50303c mx6sabre_common: Dynamically change the video output - 9b412b485a mx6sabre_common: Place video related settings in common code - d3d0f38957 wandboard: Set fdt based on board_rev and board_name - 199cce79e4 mx6sabresd: Enable video interfaces in bootargs - 37d69b40ea mx6sabresd: Use LDO dtb file until LDO bypass support is added - 29fffd2510 mx6slevk: Use LDO dtb file until LDO bypass support is added Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br> Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-02 13:13:32 +0000