| Age | Commit message (Collapse) | Author |
|---|
|
This includes the following change:
a631182 warp7: update defconfig to support the generic loading interface
Signed-off-by: Pierre-Jean TEXIER <texier.pj2@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Without this, bitbake use the default one, and not "u-boot-fslc-fw-utils".
This was observed when layer is used together with poky (with Mender).
Signed-off-by: Pierre-Jean TEXIER <texier.pj2@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The new name is much more consistent with what this actually means. We put
the pieces in place to rename everything a while back but looks like we
forgot to actually do it! Fix that now.
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
9f7df1b - env: sf:Enable environmnet varibale before relocation
840a903 - board/ls2080a, ls1088a: Add check for mc-dpl applied in fdt
208b0b6 - armv8: ls1088 : MC alignment should always be fixed to 512MB
6dd3af0 - ls1012a:dts: Correct LS1012A-2G5RDB device tree
d7ca121 - armv8: layerscape: Discard the needless cpu nodes
69620c9 - armv8: ls1043a/ls2080a: check SoC by device ID
196d773 - armv8: ls1088ardb: support force SDHC mode by hwconfig
68218ae - LS1012ARDB Secure Boot: Add encapsulation support
90a096f - armv8: ls1046aqds: update IFC NOR timings
212917d - drivers: net: pfe_eth: Disable autonegotiation for 2.5G SGMII
77c795d - board: freescale: ls1012a: LS1012A-2G5RDB board support
51c350b - armv8/kconfig: Align boards of same family at one place
6adcdca - driver: fsl-mc: MC object cleanup when DPL not loaded
4b02c65 - powerpc/p1_p2_rdb_pc: Fix endian access issue on EHCI intinalization
bbc95ad - powerpc/T104xRDB: Fix endian access issue on EHCI intinalization
5857001 - boards: ls1046ardb: disable unavailable "ethernet" node in dts
86682f0 - arm: Add support of updating dts before fix-up
df8d00c - common: Fix-up MAC addr in dts by fetching env variable serially
75045a7 - fsl-qbman: Include missing function prototype
269953a - driver: net: fsl-mc: flib changes for MC 10.3.0
813486a - drivers: net: pfe_eth: remove unused code under CONFIG_PFE_WARN_WA
fdf2bf4 - drivers: net: pfe_eth: remove unused code under CONFIG_UTIL_PE_DISABLED
44c39f0 - drivers: net: pfe_eth: cleanup typos and indent
5dc8c93 - drivers: net: pfe_eth: use writel/readl to access hw bds
8dc0a63 - drivers: net: pfe_eth: add pfe_rx_done to clear bd after packet processing
85a3451 - usb: Add delay to fix USB 2.0 stick enumeration failure on LS208xA
139ec62 - Revert "armv8: ls1088a: correct pcie fixup compatible string"
7bd0db8 - SECURE BOOT: Add SD fall back option
2068345 - cmd: mac: Update description of help
b040e4a - armv8: fsl-layerscape: Add support of disabling core prefetch
f53d786 - armv8: fsl-layerscape: Allocate Secure memory from first ddr region
8e9a95e - u-boot: fixup the iommu-map property of fsl-mc node
a95797b - armv7: ls1021a: Fix marco CONFIG_LS102XA
c249f5f - ls1088aqds: Add CONFIG_SGMII_PHYLIB in header file for QDS
64169db - armv8: ls1088: introduce CONFIG_SGMII_PHYLIB
002dc70 - driver: net: ldpaa_eth: Add PHY-less SGMII support
44a294b - drivers: net: ldpaa_eth: Correct error handler for qbman_swp_acquire()
0ca9091 - armv8: fsl-layerscape: Fix MC reserved memory calculation
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
There was a wrong include of u-boot.inc on this recipe which were
causing build errors, also it was using the old target to build the
environment tools.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes on top of 2017.11 tag:
ca0c3f3fac configs: icore-rqs: Enable falcon mode
c39e5ad9ad engicam: imx6q: Return mmc dev 0 for icore
7953884755 i.MX6: engicam: Add imx6q/imx6ul boards for existing boards
924ac4a9ac board: icore-rqs: Fix mmc get env device
1caace2d74 i.MX6UL: icore: Add SPL_OF_CONTROL support
655f153b7c pinctrl: imx6ul: Fix pinctrl data overlapped with DT area
735b8429cf i.MX6Q: icore: Add SPL_OF_CONTROL support
e2aee01772 i.MX6Q: icorem6: Move spl load fit to common/spl
7265424b4b i.MX6: engicam: Move set_fdt_file to common
676484d0f5 mx6sxsabresd: Use PARTUUID to specify the rootfs location
c685436fb6 imx: Remove boolean parameter from wdog powerdown function
dfd399d4b2 imx: Also clear powerdown enable bit for WDOG3 on i.MX6ULL
21e5b103ee mx6ull: Fix WDOG3 base address
28a06c12ca envtools: make sure version/timestamp header file are available
5a3afcb579 mx6sabreauto: Remove unneeded SPL selection
a80c8e3c7a mx6: Select MX6QDL option via Kconfig
7c9d795887 mx53: Add Board support for GE PPD
a7dbf3c3a4 board: ge: make VPD code common
fd7ab796b5 rtc: add support for s35392a
efc51f73e3 bootcount: add support for bootcounter on EXT filesystem
8b0c1c4d23 arm: mx5: Add more register definitions
29e5e9df46 pwm: imx: Enable PWM support on i.MX53
02cc3e8037 ext4: recover from filesystem corruption when reading
4c530ec27c imx: mxc_i2c: tweak the i2c transfer method
87d4563bbd Revert "wandboard: Remove unnecessary delay"
913c93d432 pico-imx6ul: Use FS_GENERIC load command
bd7c72d0e2 pico-imx6ul: Add function to create gpt partitions
1bd87551eb pico-imx6ul: Define partition layout in the environment
6d2499a223 pico-imx6ul: Add boot and rootfs dfu_alt_info
114501165b pico-imx6ul: Use PARTUUID to specify the rootfs location
9a6f8019f6 pico-imx6ul: Move dfu_alt_info to CONFIG_DFU_ENV_SETTINGS variable
0b20df36bc mx25pdk: Change root to use a single partition layout
2dcd3eeeff pico-imx7d: Enable booting from single partition
d6008b2e1a pico-imx7d: Replace fatload command
7fe81082a3 pico-imx7d: Add support for secure boot
f960fe77df mx6sabre_common: Place video related settings in common code
f4998c99d4 mx6sabre_common: Dynamically change the video output
c3e252e8ca mx6sabresd: Enable video interfaces in bootargs
c94a211847 mx6sabresd: Use LDO dtb file until LDO bypass support is added
3abd094faf mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
c249f5f - ls1088aqds: Add CONFIG_SGMII_PHYLIB in header file for QDS
64169db - armv8: ls1088: introduce CONFIG_SGMII_PHYLIB
002dc70 - driver: net: ldpaa_eth: Add PHY-less SGMII support
44a294b - drivers: net: ldpaa_eth: Correct error handler for qbman_swp_acquire()
0ca9091 - armv8: fsl-layerscape: Fix MC reserved memory calculation
fbedf04 - armv8: Workaround for USB erratum A-009007 on LS1088A
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes:
fbedf04 - armv8: Workaround for USB erratum A-009007 on LS1088A
07dce79 - board: freescale: ls1012a: fix RGMII tx delay issue
39bd068 - armv8: ls1088aqds: Change phy mode to PHY_INTERFACE_MODE_RGMII_ID
aad3422 - armv8: configs: ls1012a: correct the generic timer frequency issue
0f0e241 - configs: ls1012a: add pfe configuration for LS1012A
a518a57 - fsl: csu: enable ns access for PFE
d91e382 - armv8: fsl-lsch2: configure pfe's scfg & dcfg registers
99089ae - armv8: fsl-lsch2: add pfe macros and update ccsr_scfg structure
7b2f1c3 - armv8: fsl-lsch2: initialize pfe gemac
f0640ed - board: freescale: ls1012a: enable network support on ls1012a platforms
af5f822 - drivers: net: pfe_eth: LS1012A PFE headers
676ef26 - drivers: net: pfe_eth: provide pfe commands
74b6833 - drivers: net: pfe_eth: LS1012A PFE driver introduction
3ddb3d3 - armv8: fsl-layerscape: Add support of GPIO structure
091c401 - driver: fsl-mc: memset pointers after malloc
4dcd33d - armv8: ls1088a: Update MC boot sequence
2dcba27 - arm64: ls2088ardb: Fix nor fall back option failure
c64ac4c - QE: Set QE_IRAM_READY after uploading firmware
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Change the git URL to Code Aurora as it mirrors the git.freescale.com.
It also changes the branch name to the matching one.
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*This includes the following changes:
503eff0 - armv8: ls1046aqds: Fix NAND offset for Fman ucode and env
c66ddf7 - arm64: ls2088ardb: Fix kernel validation failure
44ffe98 - armv8: ls1043ardb: disable PPA loading during SPL stage for SD boot
043c85a - armv8: ls1046ardb: disable PPA loading during SPL stage for SD boot
b68c991 - armv8: fsl-layerscape: Fix some coding style problems in soc.c
25cd705 - board/ls1088: Add fsl_fdt_fixup_flash
85bfc58 - ls1088aqds: Enable IFC and QIXIS in SPL image
96cc4d7 - armv8: fsl-layerscape: Add back L3 flushing for all exception levels
bdf9c1a - fsl-lsch2: csu: correct the workaround A-010315
26aaf13 - armv8/fsl-lsch2: correct QMAN clock
a836f94 - arm64: ls1012ardb: Add distro secure boot support
ef3b345 - arm64: ls1012afrdm: Add distro boot support
2bed40e - arm64: ls1012ardb: Add distro boot support
bb85ef3 - board: common: vid: Move IR chip specific code in flag
806bca8 - board/ls2080ardb: Add mcmemsize variable in default env
Signed-off-by: Chunrong Guo <chunrong.guo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes:
a6a15fedd1 udoo: Remove cpu type check prior to setup_sata()
25aa0ce98a wandboard: Remove cpu type check prior to setup_sata()
6c94a45c23 wandboard: Add support for the MX6QP variant
46800a79b6 mx6slevk: Fix MMC breakage for the SPL target
3760ecfce4 imx: Fix regression with CONFIG_DM_MMC=y
59d4771838 ARM: imx6: Add DHCOM i.MX6 PDK board support
a77a794847 imx: mx7: spl: remove redundant SATA definitionas
fdb70bf620 mx6: sys_proto: Add prototypes for imx6_pcie_toggle() functions
308e7844f8 mx6: clock: Add a prototype for do_mx6_showclocks()
300a095165 i.mx6ul: xpress: update UART init for current board revision
2812798091 mx6slevk: Use PARTUUID to specify the rootfs location
acea9a74c8 drivers: pci: imx: fix imx_pcie_remove function
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Jun Zhu <junzhu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
- Use the same EXTRA_OEMAKE and do_compile task that u-boot-mkimage
from OE-Core
- Rework do_install task
- Recipe depends only of openssl, no need to append DEPENDS variable
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
- u-boot-msxboot doesn't use recipes-bsp/u-boot/u-boot.inc, so
require this file only in recipes that use it.
- Compatible machine and package arch are needed only for
u-boot-fslc, once u-boot-fw-utils has cross class and u-boot-mxsboot
has native class.
- Add description in u-boot-fslc recipe
- Drop unused depends for mxs. We don't need to use elftosb, mkimage
can generate an BootStream for i.MX23 and i.MX28. See u-boot-fslc
commit 6654f33c9b520bd4073c7f82a13044e79bc1489.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following changes:
977c60b153 Revert "wandboard: Set fdt based on board_rev and board_name"
e439122438 wandboard: Add support for the latest revd1 revision
ada0d28cb4 doc: update imx_usb_loader URL
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following changes:
- 0edf2007c6 arm: imx7d: add support for Compulab cl-som-imx7
- f62d34202d imx: mx7: SPL support for i.MX7
- b4ee050163 imx: mx7: DDR controller configuration for the i.MX7 architecture
- 9ad01a2efb imx: mx7: fix the CCM_ macros
- 23a60cfbec icorem6_rqs: env: Return mmc devno
- 4a8723b299 icore: configs: Fix merge conflict issue
- 48e0c40604 topic_miami: Remove CONFIG_CMD_BOOTZ undef
- 19cdefc994 mx6sabresd: Include <usb/ehci-ci.h> header file
- 9b1dd35df2 usb: ehci-ci: Add a prototype for board_ehci_power()
- 23e7d7d1c6 mx6sabresd: Include <asm/mach-imx/spi.h> header file
- 916afc51de mx6: soc: Include <asm/bootm.h> header file
- fc7dc87a9f mx7ulp_evk: Move CONFIG_CMD_BOOTZ to Kconfig
- 96fd173ca1 imx: sys_proto: Add a prototype for board_mmc_get_env_dev()
- e6e4db4473 imx: Include <input.h> header file
- cbc14ee959 mx6: toradex: Remove custom CONFIG_SPL_PAD_TO definition
- c6cbcda3de README.imx6: Prefer loading SPL via the new SDP mechanism
- d327aab07f mx53loco: Let CONFIG_DISPLAY_CPUINFO be selected
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Use a common file to make easier update, maintain and create
others U-Boot recipes like U-Boot fw-utils.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes:
9f164a1a01 mx25pdk: Change root to use a single partition layout
642e1ec971 mx25pdk: Remove duplicated define
bb8bb2c1bd mx25pdk: Use generic filesystem commands
a3581b705a imx6: disable clock command and print_cpuinfo code in SPL
555c0086e6 colibri_imx6: Avoid calling setup_display() from SPL code
0985fc630b apalis_imx6: Avoid calling setup_display() from SPL code
a01e041d10 mx6cuboxi: Avoid calling setup_display() from SPL code
939d30becd wandboard: Avoid calling setup_display() from SPL code
025f356829 cgtqmx6eval: Avoid calling setup_display() from SPL code
3cfa1bd347 mx6sabresd: Avoid calling setup_display() from SPL code
6d9b99b923 mx6sabresd: Add Serial Download Protocol support
3766ef9cea toradex: imx6: Move g_dnl_bind_fixup() into common SPL code
da4a0fd824 board: ge: bx50v3: set eth0 MAC address
5e57f55125 detect and setup solidrun hummingboard2
35e7f4f0aa imx6: drop duplicated bss memset and board_init_r() call
72066ea7f5 pico-imx7d: Add "how to boot with NXP 4.1 Kernel"
58cb0bc9f0 imx: imx7d: remove CamelCase from ENET_xMHz macros
2df17bffbc imx_common: detect USB serial downloader reliably
5615ed0835 imx: add macro to detect whether USB PHY is active
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following changes:
ed4d1d9 Merge pull request #20 from vanmaegima/2017.09+fslc
114483a pico-imx7d: Enable booting from single partition
85cdf96 pico-imx7d: Replace fatload command
Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This commit merge tag v2017.09 and apply the following commits on top
of it:
- e4a4d913e9 ipu_common: Let the MX6 IPU clock be calculated in run-time
- 57ea8c60e4 pico-imx7d: Add support for secure boot
- c5ad50303c mx6sabre_common: Dynamically change the video output
- 9b412b485a mx6sabre_common: Place video related settings in common code
- d3d0f38957 wandboard: Set fdt based on board_rev and board_name
- 199cce79e4 mx6sabresd: Enable video interfaces in bootargs
- 37d69b40ea mx6sabresd: Use LDO dtb file until LDO bypass support is added
- 29fffd2510 mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following changes:
65a6a14c mx6cuboxi: Revert "mx6cuboxi: Move CONFIG_CMD_SATA to Kconfig"
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following changes:
be634a9 mx6sabre_common: Dynamically change the video output
f5f42f3 mx6sabre_common: Place video related settings in common code
43d4159 mx6cuboxi: Move CONFIG_CMD_SATA to Kconfig
Signed-off-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This release provides a huge improvement regarding the support for SPL
to more boards.
We now uses this and migrated following boards:
- imx6qpsabresd -> imx6qdlsabresd
- imx6qsabresd -> imx6qdlsabresd
- imx6dlsabresd -> imx6qdlsabresd
- imx6solosabresd -> imx6qdlsabresd
- imx6qpsabreauto -> imx6qdlsabreauto
- imx6qsabreauto -> imx6qdlsabreauto
- imx6dlsabreauto -> imx6qdlsabreauto
- imx6solosabreauto -> imx6qdlsabreauto
So now, the 8 boards are covered by 2 machine files. This drastically
reduces the build time and allow for a better user experience as we
can use the same image to test different boards.
In summary an image built for imx6qdlsabresd or imx6qdlsabreauto is
capable of run on a its respective board which contains a i.MX6
QuadPlus, Quad, Dual, DualLite or Solo SoC removing the need of a
specific image for each SoC type.
On top of the official 2017.07 release, following patches are
included:
801fd44563 mx6sabreauto: Make Ethernet functional again
8ccb1970b8 wandboard: Set fdt based on board_rev and board_name
e6605743e5 mx6sabresd: Enable video interfaces in bootargs
e50a2475d4 mx6sabresd: Use LDO dtb file until LDO bypass support is added
b1a4715311 mx6slevk: Use LDO dtb file until LDO bypass support is added
957409876b imx: cx9020: try pxe boot, if no vmlinuz on mmc
3608315bf1 imx: cx9020: use fdt_addr_r and ramdisk_addr_r
9a1c960516 mx6sabreauto: Add Falcon mode support
3a279e5fe8 warp: Use PARTUUID to specify the rootfs location
0f9a6703e7 embestmx6boards: Use PARTUUID to specify the rootfs location
c877510614 mx6cuboxi: Use PARTUUID to specify the rootfs location
0ada2d6caf wandboard: Use PARTUUID to specify the rootfs location
eee442362c mx6sabre: Use PARTUUID to specify the rootfs location
80a56615fa mx6sabreauto: Do not enable WEIM by default
321339efd7 imx: reorganize IMX code as other SOCs
1567ce3edc mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
40294f880d dm: mmc: fsl_esdhc: handle vqmmc supply
0378edcd02 mmc: fsl_esdhc: introduce vs18_enable for 1.8V fix I/O
3657cae890 mmc: fsl_esdhc: correct type of wp_enable
45103e1030 imx6_spl: Add u-boot-dtb.img for SPL payload
61131fa4b5 mx6sabreauto: Update to SPL only mode
07a667be9b mx6qsabreauto: Add SPL support
4506c859ee mx6cuboxi: Add support for sata
a5c5962327 mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.
4590f11b61 mx6: soc: Move mxs_dma_init() into the mxs nand driver
10d185960e net: fec_mxc: fix PHY initialization bug with CONFIG_DM_ETH
b2d4bf303e icorem6_rqs: Rename icorem6_rqs config file
af34708e1e dt-bindings: Document the Broadcom STB wake-up timer node
3e92667cfe serial: mxc: Add debug uart support
4e2b31a5c5 serial: mxc: Code cleanup
27835dae1a serial: mxc: Move common baud gen into _mxc_serial_setbrg
1ca9fe11fd serial: mxc: Move common init into _mxc_serial_init
14ac9d06be serial: mxc: Move cr1 and cr2 write to mxc_serial_setbrg
fdd1f0debc serial: mxc: Use RFDIV in dm-code
fd008b0569 serial: mxc: Add common mxc_uart reg space
2fd7878124 imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL
5c72de6152 ot1200: enable CONFIG_IMX_THERMAL for detailed thermal information
8e38f54c56 mx6sabresd: Fix guard file symbol
3320a872b0 wandboard: Remove unnecessary delay
d5ae3ce6dd cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
1325b822da cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
844365a5a0 mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
ff9e6d62ed mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add support for the i.MX 6SLL EVK and supporting boot configurations
Signed-off-by: Alexandra Safta <alexandra-ioana.safta@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add use-mainline-bsp to COMPATIBLE_MACHINE since this recipe is for situations
where the user wants to use mainline, and u-boot-fslc is considered mainline.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
*include the following changes
a06b209 - ls1012aqds:Copyright added in file ls1012aqds_pfe.h
f3fa3db - Merge pull request #200 in SDK/u-boot-devel from jira/QUBOOT-2516 to master
ad74937 - armv8/fsl-layerscape: fdt: On ls1012 don't check sysclk for USB
436ad38 - T1042RDB: Remove nand secure boot compilation error
af36232 - Merge pull request #197 in SDK/u-boot-devel from jira/QSDK-3498 to master
6cae345 - Merge pull request #194 in SDK/u-boot-devel from jira/QUBOOT-2432 to master
15d85eb - armv8: ls1046aqds: enable ppa in defconfig
9ac8b14 - armv8: ls1046aqds: added ppa support
50dc1ec - config: fsl-ppa: support load PPA from eMMC/SD and NAND Flash
4185ac3 - fsl PPA: add support PPA image loading from NAND and SD
be143b2 - mtd: nand: remove nand size print from nand_init function
17c7a0c - mtd: nand: add initialization flag
1b99b67 - Merge pull request #195 in SDK/u-boot-devel from jira/QUBOOT-2448 to master
7f6bb70 - Merge pull request #193 in SDK/u-boot-devel from jira/QUBOOT-2485 to master
f4ea06d - armv8/fsl-layerscape: fdt: replace CONFIG_ARCH_LS1012A with CONFIG_LS1012A
a2acee2 - cmd: move CMD_PXE to Kconfig
74233ce - cmd: Convert CMD_BOOTMENU
8a82416 - powerpc: e6500: Lock/unlock 1 cache instead of L1 as init_ram
ba5e636 - Merge pull request #191 in SDK/u-boot-devel from jira/QUBOOT-2338 to master
99cab9b - Merge pull request #189 in SDK/u-boot-devel from jira/QUBOOT-2438 to master
c6a1023 - armv8: dts: fsl-ls1012a: Change number of CS in SPI node
ddc2ade - spi: fsl_qspi: Add support for one chip select
905d419 - Merge pull request #188 in SDK/u-boot-devel from jira/QUBOOT-1949 to master
f47bef7 - arm: ls1043ardb: Add NAND secure boot target
0d3329b - arm: ls1046ardb: Add SD secure boot target
5cbd88a - arm: ls1043ardb: Add SD secure boot target
9b61565 - crypto/fsl : Reduce the size of CAAM driver for SPL Build
fd4214e - LS1046ARDB: SPL size reduction in case of non-xip boot
b6fb53f - LS1043ARDB: SPL size reduction in case of non-xip boot
390b399 - armv8/ls104xa: remove the DDR interactive debugging info from SPL
7b996bc - board: freescale: Enable PSCI on LS2080A
7deaf93 - pci: layerscape: Add support ls2088a kernel DT node fixup
79bbfc9 - pci: layerscape: add LS2088A series SoC pcie support
ea5c6e4 - ls1012aqds:Fix up for 1G and 2.5G interface
0dffcb8 - board: ls1012aqds: Update PHY address for AQR 105 riser card
7069777 - board: ls1012aqds: Add support of 2.5G X-SGMII riser card
634cf94 - driver: net: pfe: Configure internal MAC to support 2.5G
0127cee - driver: net: pfe: Add support of MDIO Clause 45 PHYs
561adee - board: ls1012aqds: Clean and reorganize board_eth_init
3b143c3 - board: ls1012aqds: Register the MDIO1 controller
48d02fb - Merge pull request #182 in SDK/u-boot-devel from jira/QUBOOT-2402 to master
c9395ee - Merge pull request #183 in SDK/u-boot-devel from jira/QUBOOT-2400 to master
8ef037c - Merge pull request #181 in SDK/u-boot-devel from jira/QUBOOT-2329 to master
b3c75e4 - drivers: net: fsl-mc: Fixup MAC addresses in DPC
e0369e0 - armv8/fsl-layerscape: fdt: remove SYSCLK frequency fixup for ls1012a
6d9421b - driver: rtc: add pcf2127 support
caefee8 - armv8/fsl-layerscape: Update erratum A009635 implementation
7efb311 - ls2080ardb,ls2080aqds: Add mcmemsize in default env setting
636228a - board: freescale: ls2080a: Intergrate and enable PPA on LS2080A
5651957 - Merge pull request #175 in SDK/u-boot-devel from jira/QUBOOT-2378 to master
bf23c09 - Secure Boot: Enable IE (Key extention) Feature in LS2080A
f26426a - Merge pull request #176 in SDK/u-boot-devel from jira/QUBOOT-2286 to master
badf91e - armv8: fsl-layerscape: Add vid support for LS2080AQDS
20f3971 - armv8: fsl-lsch3: Update VID support
746211e - armv8: fsl-layerscape: Updates DCFG register map
049463b - LS2080A : Move sec_init to board_init
a99dd2c - SECURE_BOOT: Define CONFIG_SYS_LS_PPA_ESBC_ADDR for LS2080A
537fe6d - LS2080A: Add validation of MC & DPC images.
8f404a5 - SECURE_BOOT: Update bootscript and its hdr addresses
134644f - Merge pull request #166 in SDK/u-boot-devel from jira/QUBOOT-2101 to master
2b17c7b - Merge pull request #165 in SDK/u-boot-devel from jira/QUBOOT-2313 to master
6cad42f - armv8: fsl-lsch2: disable ECC on armv8 chassis 2 platforms
475feb5 - driver: net: fsl-mc: Use aligned address for MC FW load
69c545f - armv8: fsl-layerscape, ccn504: Set forced-order mode in RNI-6, RNI-20
5669484 - driver: fsl-mc: qbman: Add QBMAN 4.1 support
235e989 - armv8: ls2080a: Add serdes1 protocol 0x3b support
0d8d4b9 - driver: net: ldpaa_eth: Fix missing bracket issue
e02d502 - armv8: ls2080a: Update serdes protocol support
6764afb - armv8/fsl-lsch3: Update code to release secondary cores
6415d77 - armv8: fsl-layerscape: Add NXP LS2088A SoC support
8f3a354 - armv8: fsl-layerscape : Check SVR for initializing TZASC
789d497 - armv8: fsl-layerscape: Update TZASC registers type
02e3cc3 - armv8: lsch3: Use SVR based timer base address detection
80dbc3c - armv8: lsch3: Add generic get_svr() in assembly
47d5b49 - LS1021ATWR: Modify u-boot size for sd secureboot
Signed-off-by: Chunrong Guo <B40290@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following changes:
- ac3b20cdbe mx6cuboxi: Remove define for PARTITION_UUIDS and CMD_PART
- eec5e45589 wandboard: Remove define for PARTITION_UUIDS and CMD_PART
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This commit merge v2017.03 tag and apply the following changes
on top of it:
- 2b94a1cb28 embestmx6boards: Use PARTUUID to specify the rootfs location
- 360d733cf3 mx6cuboxi: Change finduuid to find on first partition
- 1f9d6d10bc wandboard: Change finduuid to find on first partition
- e5b76d93d4 mx6cuboxi: Use PARTUUID to specify the rootfs location
- b422795450 wandboard: Use PARTUUID to specify the rootfs location
- 5146b4dc55 wandboard: Set fdt based on board_rev and board_name
- dfd613be1c warp: Change default bootenv configuration
- 0e83e164f3 mx6sabresd: Enable video interfaces in bootargs
- 2d5987e950 iMX6: Change mmcroot to use fixed mmc block index for USDHC
- 66eb2a0724 mx6sabresd: Use LDO dtb file until LDO bypass support is added
- 90ecfc7751 mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
New commits:
2735535 armv8/fsl-layerscape: corrected clock initialization
0f820e2 Merge pull request #161 in SDK/u-boot-devel from jira/QUBOOT-2290 to master
8729bed board/t1024rdb: enable board-level reset when issuing reset command
1ebcbe9 armv8/fsl-lsch3: consolidate the clock system initialization
9e1ec97 armv8/fsl-lsch2: refactor the clock system initialization
376ce3d Merge pull request #158 in SDK/u-boot-devel from jira/QUBOOT-2248 to master
263a7d9 driver: net: pfe: Make PFE AXI transactions non-bufferable.
744898c pci: layerscape: enable PCIe config ready
cccbbd4 arm: PSCI: remove CONFIG_MP to support LS1012A
c013882 arm: layerscape: Enable UUID & GPT partition for NXP's ARM SoC
7661a32 Merge pull request #154 in SDK/u-boot-devel from jira/QUBOOT-1839 to master
8644091 Merge pull request #155 in SDK/u-boot-devel from jira/QUBOOT-2186 to master
13cfec0 ARMv8/fsl-layerscape: Correct the OCRAM size
b416b58 sf: set the Uniform Sector to CR3NV instead of CR3V
29f27fe armv8: fsl-lsch2: enable snoopable sata read and write
2d98a92 ARMv8/fsl-layerscape: Enable data coherency between cores in cluster
910b5f9 armv8: Enable CPUECTLR.SMPEN for coherency
62cddb1 Merge pull request #150 in SDK/u-boot-devel from jira/QUBOOT-2059 to master
d7d8125 Merge pull request #149 in SDK/u-boot-devel from jira/QUBOOT-1840 to master
166db39 armv8: pfe: Update driver coding style
2909f14 board: ls1012aqds: Avoid reset masking
99f097b driver: net: pfe: Update class firmware
f8f17dc driver: net: pfe: Change MDIO HOLDTIME value to 5
1f10108 armv8:pfe:frdm: Reset external PHYs before driver starts
ce83bda driver: pfe_eth: use #ifdef instead of #if
d928553 armv8: pfe: Enable UDP checksum for proper tftp operation
2f33023 driver: net: pfe: Rest external PHYs before driver starts
73f304b driver: net: PFE: Fix the reset woraround
bb2afb7 driver: net: PFE: Add reset workaround
ae5b99d arm: ls1012a: Add support of PPFE
58b93bc arm: fsl-layerscape: Config CSU for PFE
4417c88 ls1046ardb: Add support power initialization
544a9d6 armv8/fsl_lsch2: Add chip power supply voltage setup
1f8ed63 ls1046ardb: cpld: add API for selecting core volt
0fbe669 pmic: pmic_mc34vr500: Add APIs to set/get SWx volt
15f65a9 pmic: pmic_mc34vr500: Add a driver for the mc34vr500 pmic
15b0697 armv8/fsl_lsch2: Add the OCRAM initialization
2df7eab docs: fsl-ppa: Add documentation for PPA trusted FW
c11a541 board: freescale: ls1012a: Intergrate and enable PPA on LS1012A
71d1c4c board: freescale: ls1012a: Enable secure DDR on LS1012A platforms
fd15680 Merge pull request #144 in SDK/u-boot-devel from jira/QUBOOT-1867 to master
7874485 LS1012ARDB: Add QSPI Secure Boot targe
5d0b2fc armv8: ls1012a: define esdhc_status_fixup for RDB board
1f60661 armv8: ls1012a: define esdhc_status_fixup for QDS board
a47eb7f mmc: fsl_esdhc: move 'status' property fixup into a weak function
075379d configs: ls1012a: enable driver model for eSDHC
9f6f892 armv8: ls1012a: add eSDHC nodes
66d0f43 mmc: fsl_esdhc: add 'fsl,esdhc' into of_match table
ebc3626 mmc: fsl_esdhc: make GPIO support optional
1a84a6b Merge pull request #146 in SDK/u-boot-devel from jira/QUBOOT-1844 to master
5117962 Merge pull request #143 in SDK/u-boot-devel from jira/QUBOOT-2116 to master
31bc4f4 Merge pull request #142 in SDK/u-boot-devel from jira/QUBOOT-1849 to master
84e5aa0 armv8: fsl-layerscape: Add support of GPIO structure
8fd4faa SECURE_BOOT: Enable chain of trust on LS1012A platform
56c6a6a board: ls1012afrdm: overwrite CONFIG_EXTRA_ENV_SETTINGS
a0b0769 armv8: ls1012a: Updating CONFIG_EXTRA_ENV_SETTINGS
45950d8 armv8:ls1012a: Update bootargs for fast-boot
6d9a8ce armv8: fsl-layerscape: Support loading 32-bit OS with PSCI enabled
6f96894 armv8: layerscape: Remove defconfig for AArch32 support
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The SoC is now dealt as a i.MX6 SoC so there is no need for the
specific metadata.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The SoC is now dealt as a i.MX6 SoC so there is no need for the
specific metadata.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Add missing argument in function getVar() to avoid error:
Exception: TypeError: getVar() missing 1 required positional argument: 'expand'
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
* Upgrade the u-boot to 2016.09
* disable the qspi endianness switch
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Zhenhua Luo <zhenhua.luo@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following change:
- c44711d Merge remote-tracking branch 'imx/master' into 2016.11+fslc
- e01064c Merge tag 'v2016.11' into 2016.11+fslc
- 45a3ad8 mx35: adjust default environment for flea3 board
- 322ac5f mx35: add GPIO setup on flea3 board
- 146fff3 mx35: factorize SDRAM setup in flea3
- 72c1015 mx35: add DT support to flea3 board
- 97c16dc imx: mx6ull: update the REFTOP_VBGADJ setting
- 27e3a3c imx: mx6sx: Disable ENET clock before switching clock parent
- 29e0cfb (tag: v2016.11) Prepare v2016.11
- 8f7c672 MAINTAINERS: mark sunxi status as Orphan
- 22bb1a7 video: bmp: Fix compilation errors with CONFIG_BMP_xxBPP enabled
- 73d570a net: write enetaddr down to hardware on env_callback
- 948b8bb spi: ti_qspi: Fix baudrate divider calculation
- 84295f2 ARM: dts: dra7xx: Update spi-max-frequency for qspi slave node
- 4d0fec0 ARM: k2g: Update PLL Multiplier and divider values
- 8b01ebd ARM: keystone2: PLL: Enable glitch free initialization sequence
- 06d43c8 arm: Set TTB XN bit in case DCACHE_OFF for LPAE mode
- 2b373cb arm: print the cache config option in hex instead of decimal
- 2ffec69 mx6ull_14x14_evk: Add README file
- 02c2de6 davinci: omapl138_lcdk: keep booting even when MAC address is invalid
- c19a28b board: am335x/mux: Do not hang when encountering a bad EEPROM
- 4fa72bd igep00x0: add Hynix timings
- 2baaa31 igep00x0: consolidate defconfigs
- ad560f8 igep00x0: disable CONFIG_DISPLAY_BOARDINFO
- d8c0d99 tools: fix mksunxiboot build for tools-all target
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following change:
- 615fdbc Merge remote-tracking branch 'origin/master' into 2016.11+fslc
- 38cacda Merge branch 'master' of git://git.denx.de/u-boot-tegra
- a8d0526 ARM: tegra186: call secure monitor for all cache-wide ops
- 1ab557a armv8: add hooks for all cache-wide operations
- b9ae641 ARM: tegra: translate __asm_flush_l3_cache to assembly
- 6db8e17 ARM: tegra: ensure nvtboot_boot_x0 alignment
- d8c4eb6 Merge branch 'master' of git://git.denx.de/u-boot-net
- aa555fe net: use random ethernet address if invalid and not zero
- 6ecf9e2 net: mvgbe: Fix build error with CONFIG_PHYLIB
- f018545 net: phy: micrel: center FLP burst timing at 16ms
- 2162245 ARM: tegra: enable Ethernet on p2771-0000
- 31c1ff9 ARM: tegra: add DWC EQoS (ethernet) to Tegra186 DT
- 2b950f3 ARM: tegra: configure Ethernet address on Tegra186
- 86919a2 ARM: tegra: add SoC-level hook for board_late_init()
- ba4dfef net: add driver for Synopsys Ethernet QoS device
- afb970f dt: net: add DWC EQoS binding
- dac09fc wandboard: Make Ethernet functional again
- 0f7c6cd mkimage: Allow including a ramdisk in FIT auto mode
- baade49 travis-ci: Try harder to build all ARM targets
- e0f2406 buildman: Fix building based on 'options' field
- 4b6035d mx6sabresd: Make Ethernet functional again
- 97bb1f0 engicam: icorem6: Fix config files
- 68fd5c1 armv8: define get_ticks() for the ARMv8 Generic Timer
- 8add679 doc: update README.arm64
- 2a380cc tools: imximage: check return value when open the plugin file
- ae3de0d image: Protect against overflow in unknown_msg()
- eb9e699 colibri_pxa270: drop lzma support for space reason
- eef55e5 Merge branch 'master' of git://git.denx.de/u-boot-usb
- dd93a8e dfu: align array in dfu_get_dev_type with enum dfu_device_type
- dbdc274 cmd: dfu: Add error handling for board_usb_init
- 7fd1173 Merge git://git.denx.de/u-boot-rockchip
- 4594ac0 rk3288: kconfig: remove duplicate definition of SPL_MMC_SUPPORT
- 3f3e1e3 rockchip: doc: add GPT partition layout
- 7f35bbb rockchip: use rockchip linux partitions layout
- 612a2a0 dts: rk3288: remove node in dmc which not need anymore
- 7d6c78f rk3288: sdram: auto-detect the capacity
- cd2f6b8 rk3288: config change for enable dram capacity auto-detect.
- 0717dde evb-rk3399: config: set emmc as default boot dev
- 1b64a05 rk3288: fix reg address for GRF_SOC_CON2
- 27b95d2 rk3399: disable the clock multiplier support when SoC init
- 5564ed5 rockchip: rk3288: Move rockchip_get_cru() out of the driver
- c8a6bc9 rockchip: rk3399: Move rockchip_get_cru() out of the driver
- 92ac73e rockchip: rk3036: Move rockchip_get_cru() out of the driver
- 8dfb4a2 clk: rk3399: fix rockchip_get_cru
- 6016982 rockchip: RK3288 needs fdt and initrd below 256M now
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This commit merges tag v2016.11-rc3 into 2016.11+fslc and prepares
to v2016.11 release.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This updates for the upcoming 2016.11 release.
This is based on top of 2016.11-rc2 plus the following changes:
- c7f1e5 embestmx6boards: Use PARTUUID to specify the rootfs location
- 0c0dcb8 mx6cuboxi: Change finduuid to find on first partition
- caf0311 wandboard: Change finduuid to find on first partition
- aeb1be5 mx6cuboxi: Use PARTUUID to specify the rootfs location
- 1bcfc34 wandboard: Use PARTUUID to specify the rootfs location
- 6d6dba9 wandboard: Set fdt based on board_rev and board_name
- 69176f6 warp: Change default bootenv configuration
- 4d31a07 mx6sabresd: Enable video interfaces in bootargs
- 9904cfb iMX6: Change mmcroot to use fixed mmc block index for USDHC
- 77f6c08 embestmx6boards: Change default bootenv configuration
- 1e89967 mx6sabresd: Use LDO dtb file until LDO bypass support is added
- d434e1b mx6slevk: Use LDO dtb file until LDO bypass support is added
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes:
- 0dbe853 embestmx6boards: Use PARTUUID to specify the rootfs location
- 7b2aeb5 mx6cuboxi: Change finduuid to find on first partition
- 163cc05 wandboard: Change finduuid to find on first partition
- 72531ef Revert "Revert "embestmx6boards: convert to use
config_distro_bootcmd.h""
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes following changes:
- 157ec06 mx6cuboxi: Use PARTUUID to specify the rootfs location
- 1009975 wandboard: Use PARTUUID to specify the rootfs location
- 7616d99 configs: wandboard: Set fdt based on board_rev and board_name
- 9128164 Revert "Revert conversion for config_distro_bootcmd.h"
- 0012fc2 Prepare v2016.09.01
- 7148ad9 Revert "image-fit: switch ENOLINK to ENOENT"
- 8303828 Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL"
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Changes:
7b0fea8 Merge pull request #70 in SDK/u-boot-devel from jira/QSDK-2961 to master
7c15891 pbl: use "wait" command instead of "flush" command
da9710b Txxx/RCW: Split unified RCW to RCWs for sd, spi and nand.
d22a007 ls102xa: spl: fix the macro name of MMC mode
5c5a3e1 fsl-layerscape: spl: fix the macro name of MMC mode
729761d fsl-layerscape: spl: remove duplicate init_early_memctl_regs()
0f03ebd armv8: ls1043ardb: fix types of variables
5dc6fbd armv8: ls1043a: remove redundant code in board files
89154ca armv7/ls1021atwr: lowlevel init and enable i-cache
b091c4b fsl_sfp : Modify macros as per changes in SFP v3.4
d2b8266 armv7:ls1021a: Enable workaround for DDR erratum A-009942
551abf9 fsl_sec_mon: Update driver for Security Monitor
462a9f3 layerscape/ppa: Refactor PPA validation code
25f8b57 crypto/fsl: Update blob cmd to accept 64bit addresses
Signed-off-by: Ting Liu <ting.liu@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Support i.MX 6ULL and upgrade to 2016.03 U-Boot
Signed-off-by: Lauren Post <lauren.post@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This includes the following changes:
- 0dea106 Merge tag 'v2016.09.01' into 2016.09+fslc
- f3363c0 (tag: v2016.09.01) Prepare v2016.09.01
- 44e3dd1 Revert "image-fit: switch ENOLINK to ENOENT"
- 6baa904 Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL"
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This update the U-Boot fork to the 2016.09 release. The following
changes are applied on top of the original release:
a3d27ea wandboard: Fix mmcroot device name
6ed7ce7 Revert conversion for config_distro_bootcmd.h
547c5ed warp: Change default bootenv configuration
dced260 wandboard: Drop revision specific DeviceTree support
6218c13 mx6sabresd: Enable video interfaces in bootargs
3196b92 Revert "embestmx6boards: convert to use config_distro_bootcmd.h"
a405f38 iMX6: Change mmcroot to use fixed mmc block index for USDHC
ddd4e7f embestmx6boards: Change default bootenv configuration
290d197 mx6sabresd: Use LDO dtb file until LDO bypass support is added
eee8253 mx6slevk: Use LDO dtb file until LDO bypass support is added
b8944fd arm: imx: add i.MX6ULL 14x14 EVK board support
067c0b6 dm: mmc: intialize dev when probe
6c7981f arm: dts: add device tree for i.MX6ULL
5bd8722 dt-bindings: add i.mx6ul clock header
cfe216b arm: dts: imx6ull: add pinctrl defines
56e4d12 pinctrl: imx6: support i.MX6ULL
3715a11 imx: iomux: fix snvs usage for i.MX6ULL
74592f9 imx: imx6ull: adjust the ldo 1.2v bandgap voltage
1245598 imx: mx6ull: Add AIPS3 initialization
de54ed4 imx: mx6ull: Update memory map address
c607887 imx: mx6ull: update clock settings and CCM register map
f4fdd70 imx: mx6ull: adjust POR_B setting for i.MX6ULL
c67a27c imx: mx6ull: misc soc update
3349f26 imx: mx6ul: using runtime check when configuring PMIC_STBY_REQ
1cc2fda imx: mx6ull: skip setting ahb clock
5be61be imx: timer: update gpt driver for i.MX6ULL
489f44d imx: ocotp: support i.MX6ULL
c8edd8a imx-common: introduce is_mx6ull
cddd8bf imx: mx6ull: add kconfig entry for MX6ULL
b8fea53 imx: mx6ull: add mx6ull major cpu type
6e6b252 imx: mx6ull: add iomux header file
480b1d5 configs: enable device tree for Colibri iMX7
cd81c94 colibri_imx7: use Ricoh RN5T567 to reboot the board
b900233 arm: dts: imx7: add Ricoh RN5T567 PMIC node
e1df8be power: pmic: add Ricoh RN5T567 PMIC support
2312eb0 colibri_imx7: remove legancy UART platform data
11169db colibri_imx7: remove legancy I2C support
76620e7 arm: dts: imx7: add basic i.MX 7/Colibri iMX7 device tree
23665c2 arm: dts: imx7: add pinctrl defines
e104855 pinctrl: imx: do not announce driver initialization
aee3b4c dm: imx: serial: support device tree
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
It includes the following change:
- e6b4241 wandboard: Fix mmcroot device name
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
texierp
C.R. Guo
Otavio Salvador
Daiane Angolini
Jun Zhu
Fabio Berton
Vanessa Maegima
Denis Pynkin
alexandra-ioana.safta@nxp.com
Trevor Woerner
Ting Liu
Zhenhua Luo
Lauren Post