Age | Commit message (Collapse) | Author |
|
The binary is generated as part of the image build so it should use
the same naming schema to provide consistency. This also fixes the wks
templates which use it.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
In rocko, when using this we triggered a warning so users had enough
time to migrate.
We are now relying on wic to generate the uSD images and then we ought
to remove the leftover code for this release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Those are untested and anyone interested in supporting them (mainly
barebox) ought to send the support to OE-Core instead.
This also removes the corresponding code from the
image_types_fsl.bbclass as it is not going to be used from now on.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The image needs to use the U-Boot generated, for the uSD card, so a
dependency on that must be added to ensure the file is available prior
'wic' uses it.
Besides that, the fstype needs to be changed so it sets the partition
mark allowing the bootrom to find it.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
There is no machine which makes use of this image type and it is
untested since long time ago. Drop it.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This adds a deprecation warning when using the 'sdcard' image format.
We are supporting 'wic' for all SoCs and the conversion is
straightforward. This 'sdcard' image format will be removed for next
release.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
In _generate_boot_image(), if a dtb file has more than one dot the
current logic fails. e.g. 'device.tree.dtb' will be truncated at the
first dot to 'device' while it should be 'device.tree'.
Fix by removing awk in favour of letting basename also remove
the .dtb extension.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This release provides a huge improvement regarding the support for SPL
to more boards.
We now uses this and migrated following boards:
- imx6qpsabresd -> imx6qdlsabresd
- imx6qsabresd -> imx6qdlsabresd
- imx6dlsabresd -> imx6qdlsabresd
- imx6solosabresd -> imx6qdlsabresd
- imx6qpsabreauto -> imx6qdlsabreauto
- imx6qsabreauto -> imx6qdlsabreauto
- imx6dlsabreauto -> imx6qdlsabreauto
- imx6solosabreauto -> imx6qdlsabreauto
So now, the 8 boards are covered by 2 machine files. This drastically
reduces the build time and allow for a better user experience as we
can use the same image to test different boards.
In summary an image built for imx6qdlsabresd or imx6qdlsabreauto is
capable of run on a its respective board which contains a i.MX6
QuadPlus, Quad, Dual, DualLite or Solo SoC removing the need of a
specific image for each SoC type.
On top of the official 2017.07 release, following patches are
included:
801fd44563 mx6sabreauto: Make Ethernet functional again
8ccb1970b8 wandboard: Set fdt based on board_rev and board_name
e6605743e5 mx6sabresd: Enable video interfaces in bootargs
e50a2475d4 mx6sabresd: Use LDO dtb file until LDO bypass support is added
b1a4715311 mx6slevk: Use LDO dtb file until LDO bypass support is added
957409876b imx: cx9020: try pxe boot, if no vmlinuz on mmc
3608315bf1 imx: cx9020: use fdt_addr_r and ramdisk_addr_r
9a1c960516 mx6sabreauto: Add Falcon mode support
3a279e5fe8 warp: Use PARTUUID to specify the rootfs location
0f9a6703e7 embestmx6boards: Use PARTUUID to specify the rootfs location
c877510614 mx6cuboxi: Use PARTUUID to specify the rootfs location
0ada2d6caf wandboard: Use PARTUUID to specify the rootfs location
eee442362c mx6sabre: Use PARTUUID to specify the rootfs location
80a56615fa mx6sabreauto: Do not enable WEIM by default
321339efd7 imx: reorganize IMX code as other SOCs
1567ce3edc mmc: fsl_esdhc: drop CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT
40294f880d dm: mmc: fsl_esdhc: handle vqmmc supply
0378edcd02 mmc: fsl_esdhc: introduce vs18_enable for 1.8V fix I/O
3657cae890 mmc: fsl_esdhc: correct type of wp_enable
45103e1030 imx6_spl: Add u-boot-dtb.img for SPL payload
61131fa4b5 mx6sabreauto: Update to SPL only mode
07a667be9b mx6qsabreauto: Add SPL support
4506c859ee mx6cuboxi: Add support for sata
a5c5962327 mx7dsabresd: Set VLD04 output to 2.8V in PMIC initialization.
4590f11b61 mx6: soc: Move mxs_dma_init() into the mxs nand driver
10d185960e net: fec_mxc: fix PHY initialization bug with CONFIG_DM_ETH
b2d4bf303e icorem6_rqs: Rename icorem6_rqs config file
af34708e1e dt-bindings: Document the Broadcom STB wake-up timer node
3e92667cfe serial: mxc: Add debug uart support
4e2b31a5c5 serial: mxc: Code cleanup
27835dae1a serial: mxc: Move common baud gen into _mxc_serial_setbrg
1ca9fe11fd serial: mxc: Move common init into _mxc_serial_init
14ac9d06be serial: mxc: Move cr1 and cr2 write to mxc_serial_setbrg
fdd1f0debc serial: mxc: Use RFDIV in dm-code
fd008b0569 serial: mxc: Add common mxc_uart reg space
2fd7878124 imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL
5c72de6152 ot1200: enable CONFIG_IMX_THERMAL for detailed thermal information
8e38f54c56 mx6sabresd: Fix guard file symbol
3320a872b0 wandboard: Remove unnecessary delay
d5ae3ce6dd cm_fx6: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
1325b822da cgtqmx6eval: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
844365a5a0 mx6slevk_spl: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
ff9e6d62ed mx6sabresd: Remove SPL entry from CONFIG_SYS_EXTRA_OPTIONS
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Acked-by: Daiane Angolini <daiane.angolini@nxp.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
do_image_sdimage[depends]
Fixes
ERROR: /mnt/a/oe/sources/meta-variscite-fslc/recipes-fsl/images/fsl-image-gui.bb: Deprecated variable(s) found: "IMAGE_DEPENDS_sdcard". Use do_image_<type>[depends] += "<recipe>:<task>" instead
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The old "IMAGE_DEPENDS..." notation has been deprecated in favour of the newer
"do_image...[depends]" notation.
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
>From OE-Core commit 8a9f249a9166347cc0468191ce130003e3d306e1:
If image type "foo" depends on image type "bar.xz", then dependencies
should be collected from the base image type (ie "IMAGE_DEPENDS_bar")
not from "IMAGE_DEPENDS_bar.xz".
IMAGE_DEPENDS_uboot.mxsboot-sdcard has uboot as base image type and
IMAGE_DEPENDS_uboot.mxsboot-sdcard = "foo" never will run.
Changing IMAGE_FSYPES to uboot-mxsboot-sdcard fix this issue and base
base will be uboot-mxsboot-sdcard.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The SoC is now dealt as a i.MX6 SoC so there is no need for the
specific metadata.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Class that allows extlinux.conf generation for U-Boot use was introduced
on OE-core commits:
- 7c18abeb2a6ef8b7bb53aa92a9ee76bd465fada2
- 33df3a65f3e8e136811da715d0cc247ce66ae0ea
We need to copy extlinux.conf file to boot partition inside /extlinux
directory. This file will be only copied if UBOOT_EXTLINUX is set to 1.
Signed-off-by: Fabio Berton <fabio.berton@ossystems.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
This change is needed as the commit OE-Core:6d969bac (image: Deploy
images to IMGDEPLOYDIR) has changed the deployment directory from
DEPLOY_DIR_IMAGE to IMGDEPLOYDIR causing failures when using the
image_types_fsl.bbclass class.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The i.MX23 and i.MX28 image stream must be built prior the sdcard
generation. The example of a failure is:
,----
| DEBUG: Executing shell function do_image_sdcard
| 0+0 records in
| 0+0 records out
| 0 bytes (0 B) copied, 1.5848e-05 s, 0.0 kB/s
| dd: failed to open '....rootfs.uboot.mxsboot-sdcard': No such file or directory
| WARNING: exit code 1 from a shell command.
`----
The failure has been found by O.S. Systems autobuilder when running
the regression tests.
Change-Id: I64ecca1160e038e15629516f97e8ade5d645be31
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Instead of resetting the sdcard dependencies, we append them. This
allow those to be set before class inherit.
Change-Id: I588a549abfe756fea38d0133c5c21ef06dfcb230
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
When the i.MX 6UltraLite (mx6ul) was separated from the SoC family mx6
(commit 24396b28f0137464cd82b9a19f705c1db180ead2) it started to create
invalid sdcard images.
This is because of SDCARD_GENERATION_COMMAND no more being triggered.
The solution in this moment is add a mx6ul override for the
SDCARD_GENERATION_COMMAND definition.
Signed-off-by: Felipe Provenzano <felipeprovenzano@maxtrack.com.br>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Refers to the following commit of poky for more detail.
commit 722430a488f39bf583e4a557a254fb84fae4d0a7
Author: Darren Hart <dvhart@linux.intel.com>
Date: Wed Dec 12 14:39:15 2012 -0800
bootimg: Use FAT 32 for images larger than 512MB
Fixes [YOCTO #2138]
Signed-off-by: Tzu-Jung Lee <roylee17@currantlabs.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
When generating the rootfs we need to include all the referenced
Device Tree files. The code were gracefully checking if the file
existed before building the image however the expected behavior is to
fail.
As consequence of this change, if someone is using a very old kernel
(no Device Tree based) and tries to generate an image, it will fail
until the machine definition is changed to not list Device Tree files
for installation.
Currently all machines supported by meta-fsl-arm BSP are consistent
for the default kernel in use however custom BSP may need to be
changed accordingly.
Change-Id: I548c65c61dfefe24154a455d097032b1598b14d3
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The code which copies the boot scripts and Device Tree files is
duplicated across the different image types. This patch reworks this
code to avoid this duplication.
Change-Id: Ib9405067a5419e1b295dfac9e3d3bd9b896d424e
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
as otherwise FAT16 might be used, which seems quite outdated and can
cause issues in certain environments (e.g. older versions of U-Boot)
Change-Id: I2d89ad235084c4a1289fae180df043a2f9e05e63
Signed-off-by: Frieder Schrempf <frieder.schrempf@exceet.de>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The rootfs generation script now runs outside of the deploy directory
so the code need to use the full path for the installed files. This
fixes the rootfs generation process so the files are copied to the FAT
partition, allowing the system to boot.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Tested-by: Daiane Angolini <daiane.angolini@freescale.com>
|
|
Signed-off-by: Lauren Post <lauren.post@freescale.com>
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
The meta-fsl-arm is going to be used as the base for this layer. It
contains a clean history and allowing a more granullar set of changes.
This commit is just a rename of all contents of meta-fsl-arm
subdirectory to this layer's root, subsequent changes are based on top
of that.
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|