From 2ad85afb3678c6c4bdefb8580803526b5c211ff8 Mon Sep 17 00:00:00 2001 From: Eric Yang Date: Wed, 15 Aug 2018 17:35:50 -0400 Subject: [PATCH 5255/5725] drm/amd/display: support 48 MHZ refclk off [Why] On PCO and up, whenever SMU receive message to indicate active display count = 0. SMU will turn off 48MHZ TMDP reference clock by writing to 1 TMDP_48M_Refclk_Driver_PWDN. Once this clock is off, no PHY register will respond to register access. This means our current sequence of notifying display count along with requesting clock will cause driver to hang when accessing PHY registers after displays count goes to 0. [How] Separate the PPSMC_MSG_SetDisplayCount message from the SMU messages that request clocks, have display own sequencing of this message so that we can send it at the appropriate time. Do not redundantly power off HW when entering S3, S4, since display should already be called to disable all streams. And ASIC soon be powered down. Signed-off-by: Eric Yang Reviewed-by: Tony Cheng Acked-by: Leo Li Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/core/dc.c | 36 +++++++++++++++++++++++++++++--- 1 file changed, 33 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index 18632db..7c5382a 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -1393,6 +1393,34 @@ static struct dc_stream_status *stream_get_status( static const enum surface_update_type update_surface_trace_level = UPDATE_TYPE_FULL; +static void notify_display_count_to_smu( + struct dc *dc, + struct dc_state *context) +{ + int i, display_count; + struct pp_smu_funcs_rv *pp_smu = dc->res_pool->pp_smu; + + /* + * if function pointer not set up, this message is + * sent as part of pplib_apply_display_requirements. + * So just return. + */ + if (!pp_smu->set_display_count) + return; + + display_count = 0; + for (i = 0; i < context->stream_count; i++) { + const struct dc_stream_state *stream = context->streams[i]; + + /* only notify active stream */ + if (stream->dpms_off) + continue; + + display_count++; + } + + pp_smu->set_display_count(&pp_smu->pp_smu, display_count); +} static void commit_planes_do_stream_update(struct dc *dc, struct dc_stream_state *stream, @@ -1446,13 +1474,17 @@ static void commit_planes_do_stream_update(struct dc *dc, core_link_disable_stream(pipe_ctx, KEEP_ACQUIRED_RESOURCE); dc->hwss.pplib_apply_display_requirements( dc, dc->current_state); + notify_display_count_to_smu(dc, dc->current_state); } else { dc->hwss.pplib_apply_display_requirements( dc, dc->current_state); + notify_display_count_to_smu(dc, dc->current_state); core_link_enable_stream(dc->current_state, pipe_ctx); } } + + if (stream_update->abm_level && pipe_ctx->stream_res.abm) { if (pipe_ctx->stream_res.tg->funcs->is_blanked) { // if otg funcs defined check if blanked before programming @@ -1713,9 +1745,7 @@ void dc_set_power_state( dc->hwss.init_hw(dc); break; default: - - dc->hwss.power_down(dc); - + ASSERT(dc->current_state->stream_count == 0); /* Zero out the current context so that on resume we start with * clean state, and dc hw programming optimizations will not * cause any trouble. -- 2.7.4