From f8f33cbd7ae08b2f7f3510ca5729d37e64442037 Mon Sep 17 00:00:00 2001 From: David Francis Date: Thu, 9 Aug 2018 13:15:36 -0400 Subject: [PATCH 5181/5725] drm/amd/display: Combine dce80 and dce100 i2c hw functions [Why] There are two versions of the hw function pointers: one for dce80 and one for all other versions. These paired functions are nearly identical. dce80 and dce100 should not require different i2c access functions. [How] Combine each pair of functions into a single function. Mostly the new functions are based on the dce100 versions as those versions are newer, support more features, and were more maintained. Signed-off-by: David Francis Reviewed-by: Sun peng Li Acked-by: Bhawanpreet Lakha Signed-off-by: Alex Deucher --- drivers/gpu/drm/amd/display/dc/dce/dce_i2c_hw.c | 237 ++++-------------------- 1 file changed, 40 insertions(+), 197 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_i2c_hw.c b/drivers/gpu/drm/amd/display/dc/dce/dce_i2c_hw.c index 6a57c48..3a63e3c 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_i2c_hw.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_i2c_hw.c @@ -58,18 +58,7 @@ static bool is_hw_busy(struct dce_i2c_hw *dce_i2c_hw) return i2c_sw_status != DC_I2C_STATUS__DC_I2C_STATUS_IDLE; } -static void set_speed_hw_dce80( - struct dce_i2c_hw *dce_i2c_hw, - uint32_t speed) -{ - - if (speed) { - REG_UPDATE_N(SPEED, 2, - FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_PRESCALE), dce_i2c_hw->reference_frequency / speed, - FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_THRESHOLD), 2); - } -} -static void set_speed_hw_dce100( +static void set_speed( struct dce_i2c_hw *dce_i2c_hw, uint32_t speed) { @@ -86,6 +75,7 @@ static void set_speed_hw_dce100( FN(DC_I2C_DDC1_SPEED, DC_I2C_DDC1_THRESHOLD), 2); } } + bool dce_i2c_hw_engine_acquire_engine( struct dce_i2c_hw *dce_i2c_hw, struct ddc *ddc) @@ -172,7 +162,7 @@ struct dce_i2c_hw *acquire_i2c_hw_engine( return NULL; } -static bool setup_engine_hw_dce100( +static bool setup_engine( struct dce_i2c_hw *dce_i2c_hw) { uint32_t i2c_setup_limit = I2C_SETUP_TIME_LIMIT_DCE; @@ -206,72 +196,11 @@ static bool setup_engine_hw_dce100( return true; } -static bool setup_engine_hw_dce80( - struct dce_i2c_hw *dce_i2c_hw) -{ - - /* Program pin select */ - { - REG_UPDATE_6(DC_I2C_CONTROL, - DC_I2C_GO, 0, - DC_I2C_SOFT_RESET, 0, - DC_I2C_SEND_RESET, 0, - DC_I2C_SW_STATUS_RESET, 1, - DC_I2C_TRANSACTION_COUNT, 0, - DC_I2C_DDC_SELECT, dce_i2c_hw->engine_id); - } - - /* Program time limit */ - { - REG_UPDATE_2(SETUP, - DC_I2C_DDC1_TIME_LIMIT, I2C_SETUP_TIME_LIMIT_DCE, - DC_I2C_DDC1_ENABLE, 1); - } - - /* Program HW priority - * set to High - interrupt software I2C at any time - * Enable restart of SW I2C that was interrupted by HW - * disable queuing of software while I2C is in use by HW - */ - { - REG_UPDATE_2(DC_I2C_ARBITRATION, - DC_I2C_NO_QUEUED_SW_GO, 0, - DC_I2C_SW_PRIORITY, DC_I2C_ARBITRATION__DC_I2C_SW_PRIORITY_NORMAL); - } - return true; -} -static void process_channel_reply_hw_dce80( - struct dce_i2c_hw *dce_i2c_hw, - struct i2c_reply_transaction_data *reply) -{ - uint32_t length = reply->length; - uint8_t *buffer = reply->data; - - REG_SET_3(DC_I2C_DATA, 0, - DC_I2C_INDEX, length - 1, - DC_I2C_DATA_RW, 1, - DC_I2C_INDEX_WRITE, 1); - - while (length) { - /* after reading the status, - * if the I2C operation executed successfully - * (i.e. DC_I2C_STATUS_DONE = 1) then the I2C controller - * should read data bytes from I2C circular data buffer - */ - - uint32_t i2c_data; - - REG_GET(DC_I2C_DATA, DC_I2C_DATA, &i2c_data); - *buffer++ = i2c_data; - - --length; - } -} -static void process_channel_reply_hw_dce100( +static void process_channel_reply( struct dce_i2c_hw *dce_i2c_hw, struct i2c_reply_transaction_data *reply) { @@ -404,7 +333,7 @@ static void execute_transaction_hw( dce_i2c_hw->transaction_count = 0; dce_i2c_hw->buffer_used_bytes = 0; } -static bool process_transaction_hw_dce80( +static bool process_transaction( struct dce_i2c_hw *dce_i2c_hw, struct i2c_request_transaction_data *request) { @@ -414,135 +343,49 @@ static bool process_transaction_hw_dce80( bool last_transaction = false; uint32_t value = 0; - { - - last_transaction = ((dce_i2c_hw->transaction_count == 3) || - (request->action == DCE_I2C_TRANSACTION_ACTION_I2C_WRITE) || - (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ)); + last_transaction = ((dce_i2c_hw->transaction_count == 3) || + (request->action == DCE_I2C_TRANSACTION_ACTION_I2C_WRITE) || + (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ)); - switch (dce_i2c_hw->transaction_count) { - case 0: - REG_UPDATE_5(DC_I2C_TRANSACTION0, - DC_I2C_STOP_ON_NACK0, 1, - DC_I2C_START0, 1, - DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ), - DC_I2C_COUNT0, length, - DC_I2C_STOP0, last_transaction ? 1 : 0); - break; - case 1: - REG_UPDATE_5(DC_I2C_TRANSACTION1, - DC_I2C_STOP_ON_NACK0, 1, - DC_I2C_START0, 1, - DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ), - DC_I2C_COUNT0, length, - DC_I2C_STOP0, last_transaction ? 1 : 0); - break; - case 2: - REG_UPDATE_5(DC_I2C_TRANSACTION2, - DC_I2C_STOP_ON_NACK0, 1, - DC_I2C_START0, 1, - DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ), - DC_I2C_COUNT0, length, - DC_I2C_STOP0, last_transaction ? 1 : 0); - break; - case 3: - REG_UPDATE_5(DC_I2C_TRANSACTION3, - DC_I2C_STOP_ON_NACK0, 1, - DC_I2C_START0, 1, - DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ), - DC_I2C_COUNT0, length, - DC_I2C_STOP0, last_transaction ? 1 : 0); - break; - default: - /* TODO Warning ? */ - break; - } - } - - /* Write the I2C address and I2C data - * into the hardware circular buffer, one byte per entry. - * As an example, the 7-bit I2C slave address for CRT monitor - * for reading DDC/EDID information is 0b1010001. - * For an I2C send operation, the LSB must be programmed to 0; - * for I2C receive operation, the LSB must be programmed to 1. - */ - - { - if (dce_i2c_hw->transaction_count == 0) { - value = REG_SET_4(DC_I2C_DATA, 0, - DC_I2C_DATA_RW, false, - DC_I2C_DATA, request->address, - DC_I2C_INDEX, 0, - DC_I2C_INDEX_WRITE, 1); - } else - value = REG_SET_2(DC_I2C_DATA, 0, - DC_I2C_DATA_RW, false, - DC_I2C_DATA, request->address); - - if (!(request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ)) { - - while (length) { - REG_SET_2(DC_I2C_DATA, value, - DC_I2C_INDEX_WRITE, 0, - DC_I2C_DATA, *buffer++); - --length; - } - } - } - - ++dce_i2c_hw->transaction_count; - dce_i2c_hw->buffer_used_bytes += length + 1; - - return last_transaction; -} - -#define STOP_TRANS_PREDICAT \ - ((dce_i2c_hw->transaction_count == 3) || \ - (request->action == DCE_I2C_TRANSACTION_ACTION_I2C_WRITE) || \ - (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ)) - -#define SET_I2C_TRANSACTION(id) \ - do { \ - REG_UPDATE_N(DC_I2C_TRANSACTION##id, 5, \ - FN(DC_I2C_TRANSACTION0, DC_I2C_STOP_ON_NACK0), 1, \ - FN(DC_I2C_TRANSACTION0, DC_I2C_START0), 1, \ - FN(DC_I2C_TRANSACTION0, DC_I2C_STOP0), STOP_TRANS_PREDICAT ? 1:0, \ - FN(DC_I2C_TRANSACTION0, DC_I2C_RW0), (0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ)), \ - FN(DC_I2C_TRANSACTION0, DC_I2C_COUNT0), length); \ - if (STOP_TRANS_PREDICAT) \ - last_transaction = true; \ - } while (false) - -static bool process_transaction_hw_dce100( - struct dce_i2c_hw *dce_i2c_hw, - struct i2c_request_transaction_data *request) -{ - uint32_t length = request->length; - uint8_t *buffer = request->data; - uint32_t value = 0; - - bool last_transaction = false; - switch (dce_i2c_hw->transaction_count) { case 0: - SET_I2C_TRANSACTION(0); + REG_UPDATE_5(DC_I2C_TRANSACTION0, + DC_I2C_STOP_ON_NACK0, 1, + DC_I2C_START0, 1, + DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ), + DC_I2C_COUNT0, length, + DC_I2C_STOP0, last_transaction ? 1 : 0); break; case 1: - SET_I2C_TRANSACTION(1); + REG_UPDATE_5(DC_I2C_TRANSACTION1, + DC_I2C_STOP_ON_NACK0, 1, + DC_I2C_START0, 1, + DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ), + DC_I2C_COUNT0, length, + DC_I2C_STOP0, last_transaction ? 1 : 0); break; case 2: - SET_I2C_TRANSACTION(2); + REG_UPDATE_5(DC_I2C_TRANSACTION2, + DC_I2C_STOP_ON_NACK0, 1, + DC_I2C_START0, 1, + DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ), + DC_I2C_COUNT0, length, + DC_I2C_STOP0, last_transaction ? 1 : 0); break; case 3: - SET_I2C_TRANSACTION(3); + REG_UPDATE_5(DC_I2C_TRANSACTION3, + DC_I2C_STOP_ON_NACK0, 1, + DC_I2C_START0, 1, + DC_I2C_RW0, 0 != (request->action & DCE_I2C_TRANSACTION_ACTION_I2C_READ), + DC_I2C_COUNT0, length, + DC_I2C_STOP0, last_transaction ? 1 : 0); break; default: /* TODO Warning ? */ break; } - /* Write the I2C address and I2C data * into the hardware circular buffer, one byte per entry. * As an example, the 7-bit I2C slave address for CRT monitor @@ -828,24 +671,24 @@ bool dce_i2c_submit_command_hw( return result; } static const struct dce_i2c_hw_funcs dce100_i2c_hw_funcs = { - .setup_engine = setup_engine_hw_dce100, - .set_speed = set_speed_hw_dce100, + .setup_engine = setup_engine, + .set_speed = set_speed, .get_speed = get_speed_hw, .release_engine = release_engine_hw, - .process_transaction = process_transaction_hw_dce100, - .process_channel_reply = process_channel_reply_hw_dce100, + .process_transaction = process_transaction, + .process_channel_reply = process_channel_reply, .is_hw_busy = is_hw_busy, .get_channel_status = get_channel_status_hw, .execute_transaction = execute_transaction_hw, .disable_i2c_hw_engine = disable_i2c_hw_engine }; static const struct dce_i2c_hw_funcs dce80_i2c_hw_funcs = { - .setup_engine = setup_engine_hw_dce80, - .set_speed = set_speed_hw_dce80, + .setup_engine = setup_engine, + .set_speed = set_speed, .get_speed = get_speed_hw, .release_engine = release_engine_hw, - .process_transaction = process_transaction_hw_dce80, - .process_channel_reply = process_channel_reply_hw_dce80, + .process_transaction = process_transaction, + .process_channel_reply = process_channel_reply, .is_hw_busy = is_hw_busy, .get_channel_status = get_channel_status_hw, .execute_transaction = execute_transaction_hw, -- 2.7.4