summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/imx6dl-aristainetos_4.dts
blob: d4c4a22db4888269c26a2294add2421dd4349c7e (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
/*
 * support fot the imx6 based aristainetos board
 *
 * Copyright (C) 2014 Heiko Schocher <hs@denx.de>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 */
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-aristainetos.dtsi"

/ {
	model = "aristainetos i.MX6 Dual Lite Board 4";
	compatible = "fsl,imx6dl";

	backlight {
		compatible = "pwm-backlight";
		pwms = <&pwm1 0 5000000>;
		brightness-levels = <0 4 8 16 32 64 128 255>;
		default-brightness-level = <7>;
		enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_backlight>;
		status = "okay";
	};

	memory {
		reg = <0x10000000 0x40000000>;
	};

	soc {
		display0: display@di0 {
			compatible = "fsl,imx-parallel-display";
			interface-pix-fmt = "rgb24";
			pinctrl-names = "default";
			pinctrl-0 = <&pinctrl_ipu_disp>;
			status = "okay";

			display-timings {
				480x800p60 {
					native-mode;
					clock-frequency = <30000000>;
					hactive = <480>;
					vactive = <800>;
					hfront-porch = <59>;
					hback-porch = <10>;
					hsync-len = <10>;
					vback-porch = <15>;
					vfront-porch = <15>;
					vsync-len = <15>;
					hsync-active = <1>;
					vsync-active = <1>;
				};
			};

			port {
				display0_in: endpoint {
					remote-endpoint = <&ipu1_di0_disp0>;
				};
			};
		};
	};
};

&ecspi2 {
	fsl,spi-num-chipselects = <1>;
	cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi2>;
	status = "okay";
};

&i2c2 {
	clock-frequency = <100000>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i2c2>;
	status = "okay";
};

&ipu1_di0_disp0 {
	remote-endpoint = <&display0_in>;
};

&pwm1 {
	status = "okay";
};