// SPDX-License-Identifier: GPL-2.0-or-later /* * Scarlett Driver for ALSA * * Copyright (c) 2013 by Tobias Hoffmann * Copyright (c) 2013 by Robin Gareus * Copyright (c) 2002 by Takashi Iwai * Copyright (c) 2014 by Chris J Arges * * Many codes borrowed from audio.c by * Alan Cox (alan at lxorguk.ukuu.org.uk) * Thomas Sailer (sailer at ife.ee.ethz.ch) * * Code cleanup: * David Henningsson */ /* * Rewritten and extended to support more models, e.g. Scarlett 18i8. * * Auto-detection via UAC2 is not feasible to properly discover the vast * majority of features. It's related to both Linux/ALSA's UAC2 as well as * Focusrite's implementation of it. Eventually quirks may be sufficient but * right now it's a major headache to work arount these things. * * NB. Neither the OSX nor the win driver provided by Focusrite performs * discovery, they seem to operate the same as this driver. */ /* Mixer Interface for the Focusrite Scarlett 18i6 audio interface. * * The protocol was reverse engineered by looking at communication between * Scarlett MixControl (v 1.2.128.0) and the Focusrite(R) Scarlett 18i6 * (firmware v305) using wireshark and usbmon in January 2013. * Extended in July 2013. * * this mixer gives complete access to all features of the device: * - change Impedance of inputs (Line-in, Mic / Instrument, Hi-Z) * - select clock source * - dynamic input to mixer-matrix assignment * - 18 x 6 mixer-matrix gain stages * - bus routing & volume control * - automatic re-initialization on connect if device was power-cycled * * USB URB commands overview (bRequest = 0x01 = UAC2_CS_CUR) * wIndex * 0x01 Analog Input line/instrument impedance switch, wValue=0x0901 + * channel, data=Line/Inst (2bytes) * pad (-10dB) switch, wValue=0x0b01 + channel, data=Off/On (2bytes) * ?? wValue=0x0803/04, ?? (2bytes) * 0x0a Master Volume, wValue=0x0200+bus[0:all + only 1..4?] data(2bytes) * Bus Mute/Unmute wValue=0x0100+bus[0:all + only 1..4?], data(2bytes) * 0x28 Clock source, wValue=0x0100, data={1:int,2:spdif,3:adat} (1byte) * 0x29 Set Sample-rate, wValue=0x0100, data=sample-rate(4bytes) * 0x32 Mixer mux, wValue=0x0600 + mixer-channel, data=input-to-connect(2bytes) * 0x33 Output mux, wValue=bus, data=input-to-connect(2bytes) * 0x34 Capture mux, wValue=0...18, data=input-to-connect(2bytes) * 0x3c Matrix Mixer gains, wValue=mixer-node data=gain(2bytes) * ?? [sometimes](4bytes, e.g 0x000003be 0x000003bf ...03ff) * * USB reads: (i.e. actually issued by original software) * 0x01 wValue=0x0901+channel (1byte!!), wValue=0x0b01+channed (1byte!!) * 0x29 wValue=0x0100 sample-rate(4bytes) * wValue=0x0200 ?? 1byte (only once) * 0x2a wValue=0x0100 ?? 4bytes, sample-rate2 ?? * * USB reads with bRequest = 0x03 = UAC2_CS_MEM * 0x3c wValue=0x0002 1byte: sync status (locked=1) * wValue=0x0000 18*2byte: peak meter (inputs) * wValue=0x0001 8(?)*2byte: peak meter (mix) * wValue=0x0003 6*2byte: peak meter (pcm/daw) * * USB write with bRequest = 0x03 * 0x3c Save settings to hardware: wValue=0x005a, data=0xa5 * * * * /--------------\ 18chn 6chn /--------------\ * | Hardware in +--+-------\ /------+--+ ALSA PCM out | * \--------------/ | | | | \--------------/ * | | | | * | v v | * | +---------------+ | * | \ Matrix Mux / | * | +-----+-----+ | * | | | * | | 18chn | * | v | * | +-----------+ | * | | Mixer | | * | | Matrix | | * | | | | * | | 18x6 Gain | | * | | stages | | * | +-----+-----+ | * | | | * | | | * | 18chn | 6chn | 6chn * v v v * ========================= * +---------------+ +--—------------+ * \ Output Mux / \ Capture Mux / * +-----+-----+ +-----+-----+ * | | * | 6chn | * v | * +-------------+ | * | Master Gain | | * +------+------+ | * | | * | 6chn | 18chn * | (3 stereo pairs) | * /--------------\ | | /--------------\ * | Hardware out |<--/ \-->| ALSA PCM in | * \--------------/ \--------------/ * * */ #include #include #include #include #include #include #include "usbaudio.h" #include "mixer.h" #include "helper.h" #include "power.h" #include "mixer_scarlett.h" /* some gui mixers can't handle negative ctl values */ #define SND_SCARLETT_LEVEL_BIAS 128 #define SND_SCARLETT_MATRIX_IN_MAX 18 #define SND_SCARLETT_CONTROLS_MAX 10 #define SND_SCARLETT_OFFSETS_MAX 5 enum { SCARLETT_OUTPUTS, SCARLETT_SWITCH_IMPEDANCE, SCARLETT_SWITCH_PAD, }; enum { SCARLETT_OFFSET_PCM = 0, SCARLETT_OFFSET_ANALOG = 1, SCARLETT_OFFSET_SPDIF = 2, SCARLETT_OFFSET_ADAT = 3, SCARLETT_OFFSET_MIX = 4, }; struct scarlett_mixer_elem_enum_info { int start; int len; int offsets[SND_SCARLETT_OFFSETS_MAX]; char const * const *names; }; struct scarlett_mixer_control { unsigned char num; unsigned char type; const char *name; }; struct scarlett_device_info { int matrix_in; int matrix_out; int input_len; int output_len; struct scarlett_mixer_elem_enum_info opt_master; struct scarlett_mixer_elem_enum_info opt_matrix; /* initial values for matrix mux */ int matrix_mux_init[SND_SCARLETT_MATRIX_IN_MAX]; int num_controls; /* number of items in controls */ const struct scarlett_mixer_control controls[SND_SCARLETT_CONTROLS_MAX]; }; /********************** Enum Strings *************************/ static const struct scarlett_mixer_elem_enum_info opt_pad = { .start = 0, .len = 2, .offsets = {}, .names = (char const * const []){ "0dB", "-10dB" } }; static const struct scarlett_mixer_elem_enum_info opt_impedance = { .start = 0, .len = 2, .offsets = {}, .names = (char const * const []){ "Line", "Hi-Z" } }; static const struct scarlett_mixer_elem_enum_info opt_clock = { .start = 1, .len = 3, .offsets = {}, .names = (char const * const []){ "Internal", "SPDIF", "ADAT" } }; static const struct scarlett_mixer_elem_enum_info opt_sync = { .start = 0, .len = 2, .offsets = {}, .names = (char const * const []){ "No Lock", "Locked" } }; static int scarlett_ctl_switch_info(struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) { struct usb_mixer_elem_info *elem = kctl->private_data; uinfo->type = SNDRV_CTL_ELEM_TYPE_BOOLEAN; uinfo->count = elem->channels; uinfo->value.integer.min = 0; uinfo->value.integer.max = 1; return 0; } static int scarlett_ctl_switch_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) { struct usb_mixer_elem_info *elem = kctl->private_data; int i, err, val; for (i = 0; i < elem->channels; i++) { err = snd_usb_get_cur_mix_value(elem, i, i, &val); if (err < 0) return err; val = !val; /* invert mute logic for mixer */ ucontrol->value.integer.value[i] = val; } return 0; } static int scarlett_ctl_switch_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) { struct usb_mixer_elem_info *elem = kctl->private_data; int i, changed = 0; int err, oval, val; for (i = 0; i < elem->channels; i++) { err = snd_usb_get_cur_mix_value(elem, i, i, &oval); if (err < 0) return err; val = ucontrol->value.integer.value[i]; val = !val; if (oval != val) { err = snd_usb_set_cur_mix_value(elem, i, i, val); if (err < 0) return err; changed = 1; } } return changed; } static int scarlett_ctl_resume(struct usb_mixer_elem_list *list) { struct usb_mixer_elem_info *elem = mixer_elem_list_to_info(list); int i; for (i = 0; i < elem->channels; i++) if (elem->cached & (1 << i)) snd_usb_set_cur_mix_value(elem, i, i, elem->cache_val[i]); return 0; } static int scarlett_ctl_info(struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) { struct usb_mixer_elem_info *elem = kctl->private_data; uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER; uinfo->count = elem->channels; uinfo->value.integer.min = 0; uinfo->value.integer.max = (int)kctl->private_value + SND_SCARLETT_LEVEL_BIAS; uinfo->value.integer.step = 1; return 0; } static int scarlett_ctl_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) { struct usb_mixer_elem_info *elem = kctl->private_data; int i, err, val; for (i = 0; i < elem->channels; i++) { err = snd_usb_get_cur_mix_value(elem, i, i, &val); if (err < 0) return err; val = clamp(val / 256, -128, (int)kctl->private_value) + SND_SCARLETT_LEVEL_BIAS; ucontrol->value.integer.value[i] = val; } return 0; } static int scarlett_ctl_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) { struct usb_mixer_elem_info *elem = kctl->private_data; int i, changed = 0; int err, oval, val; for (i = 0; i < elem->channels; i++) { err = snd_usb_get_cur_mix_value(elem, i, i, &oval); if (err < 0) return err; val = ucontrol->value.integer.value[i] - SND_SCARLETT_LEVEL_BIAS; val = val * 256; if (oval != val) { err = snd_usb_set_cur_mix_value(elem, i, i, val); if (err < 0) return err; changed = 1; } } return changed; } static void scarlett_generate_name(int i, char *dst, int offsets[]) { if (i > offsets[SCARLETT_OFFSET_MIX]) sprintf(dst, "Mix %c", 'A'+(i - offsets[SCARLETT_OFFSET_MIX] - 1)); else if (i > offsets[SCARLETT_OFFSET_ADAT]) sprintf(dst, "ADAT %d", i - offsets[SCARLETT_OFFSET_ADAT]); else if (i > offsets[SCARLETT_OFFSET_SPDIF]) sprintf(dst, "SPDIF %d", i - offsets[SCARLETT_OFFSET_SPDIF]); else if (i > offsets[SCARLETT_OFFSET_ANALOG]) sprintf(dst, "Analog %d", i - offsets[SCARLETT_OFFSET_ANALOG]); else if (i > offsets[SCARLETT_OFFSET_PCM]) sprintf(dst, "PCM %d", i - offsets[SCARLETT_OFFSET_PCM]); else sprintf(dst, "Off"); } static int scarlett_ctl_enum_dynamic_info(struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) { struct usb_mixer_elem_info *elem = kctl->private_data; struct scarlett_mixer_elem_enum_info *opt = elem->private_data; unsigned int items = opt->len; uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED; uinfo->count = elem->channels; uinfo->value.enumerated.items = items; if (uinfo->value.enumerated.item >= items) uinfo->value.enumerated.item = items - 1; /* generate name dynamically based on item number and offset info */ scarlett_generate_name(uinfo->value.enumerated.item, uinfo->value.enumerated.name, opt->offsets); return 0; } static int scarlett_ctl_enum_info(struct snd_kcontrol *kctl, struct snd_ctl_elem_info *uinfo) { struct usb_mixer_elem_info *elem = kctl->private_data; struct scarlett_mixer_elem_enum_info *opt = elem->private_data; return snd_ctl_enum_info(uinfo, elem->channels, opt->len, (const char * const *)opt->names); } static int scarlett_ctl_enum_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) { struct usb_mixer_elem_info *elem = kctl->private_data; struct scarlett_mixer_elem_enum_info *opt = elem->private_data; int err, val; err = snd_usb_get_cur_mix_value(elem, 0, 0, &val); if (err < 0) return err; val = clamp(val - opt->start, 0, opt->len-1); ucontrol->value.enumerated.item[0] = val; return 0; } static int scarlett_ctl_enum_put(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) { struct usb_mixer_elem_info *elem = kctl->private_data; struct scarlett_mixer_elem_enum_info *opt = elem->private_data; int err, oval, val; err = snd_usb_get_cur_mix_value(elem, 0, 0, &oval); if (err < 0) return err; val = ucontrol->value.integer.value[0]; val = val + opt->start; if (val != oval) { snd_usb_set_cur_mix_value(elem, 0, 0, val); return 1; } return 0; } static int scarlett_ctl_enum_resume(struct usb_mixer_elem_list *list) { struct usb_mixer_elem_info *elem = mixer_elem_list_to_info(list); if (elem->cached) snd_usb_set_cur_mix_value(elem, 0, 0, *elem->cache_val); return 0; } static int scarlett_ctl_meter_get(struct snd_kcontrol *kctl, struct snd_ctl_elem_value *ucontrol) { struct usb_mixer_elem_info *elem = kctl->private_data; struct snd_usb_audio *chip = elem->head.mixer->chip; unsigned char buf[2 * MAX_CHANNELS] = {0, }; int wValue = (elem->control << 8) | elem->idx_off; int idx = snd_usb_ctrl_intf(chip) | (elem->head.id << 8); int err; err = snd_usb_ctl_msg(chip->dev, usb_rcvctrlpipe(chip->dev, 0), UAC2_CS_MEM, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN, wValue, idx, buf, elem->channels); if (err < 0) return err; ucontrol->value.enumerated.item[0] = clamp((int)buf[0], 0, 1); return 0; } static const struct snd_kcontrol_new usb_scarlett_ctl_switch = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "", .info = scarlett_ctl_switch_info, .get = scarlett_ctl_switch_get, .put = scarlett_ctl_switch_put, }; static const DECLARE_TLV_DB_SCALE(db_scale_scarlett_gain, -12800, 100, 0); static const struct snd_kcontrol_new usb_scarlett_ctl = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, .name = "", .info = scarlett_ctl_info, .get = scarlett_ctl_get, .put = scarlett_ctl_put, .private_value = 6, /* max value */ .tlv = { .p = db_scale_scarlett_gain } }; static const struct snd_kcontrol_new usb_scarlett_ctl_master = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .access = SNDRV_CTL_ELEM_ACCESS_READWRITE | SNDRV_CTL_ELEM_ACCESS_TLV_READ, .name = "", .info = scarlett_ctl_info, .get = scarlett_ctl_get, .put = scarlett_ctl_put, .private_value = 6, /* max value */ .tlv = { .p = db_scale_scarlett_gain } }; static const struct snd_kcontrol_new usb_scarlett_ctl_enum = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "", .info = scarlett_ctl_enum_info, .get = scarlett_ctl_enum_get, .put = scarlett_ctl_enum_put, }; static const struct snd_kcontrol_new usb_scarlett_ctl_dynamic_enum = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "", .info = scarlett_ctl_enum_dynamic_info, .get = scarlett_ctl_enum_get, .put = scarlett_ctl_enum_put, }; static const struct snd_kcontrol_new usb_scarlett_ctl_sync = { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE, .name = "", .info = scarlett_ctl_enum_info, .get = scarlett_ctl_meter_get, }; static int add_new_ctl(struct usb_mixer_interface *mixer, const struct snd_kcontrol_new *ncontrol, usb_mixer_elem_resume_func_t resume, int index, int offset, int num, int val_type, int channels, const char *name, const struct scarlett_mixer_elem_enum_info *opt, struct usb_mixer_elem_info **elem_ret ) { struct snd_kcontrol *kctl; struct usb_mixer_elem_info *elem; int err; elem = kzalloc(sizeof(*elem), GFP_KERNEL); if (!elem) return -ENOMEM; elem->head.mixer = mixer; elem->head.resume = resume; elem->control = offset; elem->idx_off = num; elem->head.id = index; elem->val_type = val_type; elem->channels = channels; /* add scarlett_mixer_elem_enum_info struct */ elem->private_data = (void *)opt; kctl = snd_ctl_new1(ncontrol, elem); if (!kctl) { kfree(elem); return -ENOMEM; } kctl->private_free = snd_usb_mixer_elem_free; strlcpy(kctl->id.name, name, sizeof(kctl->id.name)); err = snd_usb_mixer_add_control(&elem->head, kctl); if (err < 0) return err; if (elem_ret) *elem_ret = elem; return 0; } static int add_output_ctls(struct usb_mixer_interface *mixer, int index, const char *name, const struct scarlett_device_info *info) { int err; char mx[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; struct usb_mixer_elem_info *elem; /* Add mute switch */ snprintf(mx, sizeof(mx), "Master %d (%s) Playback Switch", index + 1, name); err = add_new_ctl(mixer, &usb_scarlett_ctl_switch, scarlett_ctl_resume, 0x0a, 0x01, 2*index+1, USB_MIXER_S16, 2, mx, NULL, &elem); if (err < 0) return err; /* Add volume control and initialize to 0 */ snprintf(mx, sizeof(mx), "Master %d (%s) Playback Volume", index + 1, name); err = add_new_ctl(mixer, &usb_scarlett_ctl_master, scarlett_ctl_resume, 0x0a, 0x02, 2*index+1, USB_MIXER_S16, 2, mx, NULL, &elem); if (err < 0) return err; /* Add L channel source playback enumeration */ snprintf(mx, sizeof(mx), "Master %dL (%s) Source Playback Enum", index + 1, name); err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum, scarlett_ctl_enum_resume, 0x33, 0x00, 2*index, USB_MIXER_S16, 1, mx, &info->opt_master, &elem); if (err < 0) return err; /* Add R channel source playback enumeration */ snprintf(mx, sizeof(mx), "Master %dR (%s) Source Playback Enum", index + 1, name); err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum, scarlett_ctl_enum_resume, 0x33, 0x00, 2*index+1, USB_MIXER_S16, 1, mx, &info->opt_master, &elem); if (err < 0) return err; return 0; } /********************** device-specific config *************************/ /* untested... */ static struct scarlett_device_info s6i6_info = { .matrix_in = 18, .matrix_out = 8, .input_len = 6, .output_len = 6, .opt_master = { .start = -1, .len = 27, .offsets = {0, 12, 16, 18, 18}, .names = NULL }, .opt_matrix = { .start = -1, .len = 19, .offsets = {0, 12, 16, 18, 18}, .names = NULL }, .num_controls = 9, .controls = { { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" }, { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL}, { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL}, { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL}, { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL}, }, .matrix_mux_init = { 12, 13, 14, 15, /* Analog -> 1..4 */ 16, 17, /* SPDIF -> 5,6 */ 0, 1, 2, 3, 4, 5, 6, 7, /* PCM[1..12] -> 7..18 */ 8, 9, 10, 11 } }; /* untested... */ static struct scarlett_device_info s8i6_info = { .matrix_in = 18, .matrix_out = 6, .input_len = 8, .output_len = 6, .opt_master = { .start = -1, .len = 25, .offsets = {0, 12, 16, 18, 18}, .names = NULL }, .opt_matrix = { .start = -1, .len = 19, .offsets = {0, 12, 16, 18, 18}, .names = NULL }, .num_controls = 7, .controls = { { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" }, { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL}, { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL}, }, .matrix_mux_init = { 12, 13, 14, 15, /* Analog -> 1..4 */ 16, 17, /* SPDIF -> 5,6 */ 0, 1, 2, 3, 4, 5, 6, 7, /* PCM[1..12] -> 7..18 */ 8, 9, 10, 11 } }; static struct scarlett_device_info s18i6_info = { .matrix_in = 18, .matrix_out = 6, .input_len = 18, .output_len = 6, .opt_master = { .start = -1, .len = 31, .offsets = {0, 6, 14, 16, 24}, .names = NULL, }, .opt_matrix = { .start = -1, .len = 25, .offsets = {0, 6, 14, 16, 24}, .names = NULL, }, .num_controls = 5, .controls = { { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone" }, { .num = 2, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, }, .matrix_mux_init = { 6, 7, 8, 9, 10, 11, 12, 13, /* Analog -> 1..8 */ 16, 17, 18, 19, 20, 21, /* ADAT[1..6] -> 9..14 */ 14, 15, /* SPDIF -> 15,16 */ 0, 1 /* PCM[1,2] -> 17,18 */ } }; static struct scarlett_device_info s18i8_info = { .matrix_in = 18, .matrix_out = 8, .input_len = 18, .output_len = 8, .opt_master = { .start = -1, .len = 35, .offsets = {0, 8, 16, 18, 26}, .names = NULL }, .opt_matrix = { .start = -1, .len = 27, .offsets = {0, 8, 16, 18, 26}, .names = NULL }, .num_controls = 10, .controls = { { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Headphone 1" }, { .num = 2, .type = SCARLETT_OUTPUTS, .name = "Headphone 2" }, { .num = 3, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, { .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL}, { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL}, { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL}, { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL}, }, .matrix_mux_init = { 8, 9, 10, 11, 12, 13, 14, 15, /* Analog -> 1..8 */ 18, 19, 20, 21, 22, 23, /* ADAT[1..6] -> 9..14 */ 16, 17, /* SPDIF -> 15,16 */ 0, 1 /* PCM[1,2] -> 17,18 */ } }; static struct scarlett_device_info s18i20_info = { .matrix_in = 18, .matrix_out = 8, .input_len = 18, .output_len = 20, .opt_master = { .start = -1, .len = 47, .offsets = {0, 20, 28, 30, 38}, .names = NULL }, .opt_matrix = { .start = -1, .len = 39, .offsets = {0, 20, 28, 30, 38}, .names = NULL }, .num_controls = 10, .controls = { { .num = 0, .type = SCARLETT_OUTPUTS, .name = "Monitor" }, { .num = 1, .type = SCARLETT_OUTPUTS, .name = "Line 3/4" }, { .num = 2, .type = SCARLETT_OUTPUTS, .name = "Line 5/6" }, { .num = 3, .type = SCARLETT_OUTPUTS, .name = "Line 7/8" }, { .num = 4, .type = SCARLETT_OUTPUTS, .name = "Line 9/10" }, { .num = 5, .type = SCARLETT_OUTPUTS, .name = "SPDIF" }, { .num = 6, .type = SCARLETT_OUTPUTS, .name = "ADAT 1/2" }, { .num = 7, .type = SCARLETT_OUTPUTS, .name = "ADAT 3/4" }, { .num = 8, .type = SCARLETT_OUTPUTS, .name = "ADAT 5/6" }, { .num = 9, .type = SCARLETT_OUTPUTS, .name = "ADAT 7/8" }, /*{ .num = 1, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, { .num = 1, .type = SCARLETT_SWITCH_PAD, .name = NULL}, { .num = 2, .type = SCARLETT_SWITCH_IMPEDANCE, .name = NULL}, { .num = 2, .type = SCARLETT_SWITCH_PAD, .name = NULL}, { .num = 3, .type = SCARLETT_SWITCH_PAD, .name = NULL}, { .num = 4, .type = SCARLETT_SWITCH_PAD, .name = NULL},*/ }, .matrix_mux_init = { 20, 21, 22, 23, 24, 25, 26, 27, /* Analog -> 1..8 */ 30, 31, 32, 33, 34, 35, /* ADAT[1..6] -> 9..14 */ 28, 29, /* SPDIF -> 15,16 */ 0, 1 /* PCM[1,2] -> 17,18 */ } }; static int scarlett_controls_create_generic(struct usb_mixer_interface *mixer, struct scarlett_device_info *info) { int i, err; char mx[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; const struct scarlett_mixer_control *ctl; struct usb_mixer_elem_info *elem; /* create master switch and playback volume */ err = add_new_ctl(mixer, &usb_scarlett_ctl_switch, scarlett_ctl_resume, 0x0a, 0x01, 0, USB_MIXER_S16, 1, "Master Playback Switch", NULL, &elem); if (err < 0) return err; err = add_new_ctl(mixer, &usb_scarlett_ctl_master, scarlett_ctl_resume, 0x0a, 0x02, 0, USB_MIXER_S16, 1, "Master Playback Volume", NULL, &elem); if (err < 0) return err; /* iterate through controls in info struct and create each one */ for (i = 0; i < info->num_controls; i++) { ctl = &info->controls[i]; switch (ctl->type) { case SCARLETT_OUTPUTS: err = add_output_ctls(mixer, ctl->num, ctl->name, info); if (err < 0) return err; break; case SCARLETT_SWITCH_IMPEDANCE: sprintf(mx, "Input %d Impedance Switch", ctl->num); err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, scarlett_ctl_enum_resume, 0x01, 0x09, ctl->num, USB_MIXER_S16, 1, mx, &opt_impedance, &elem); if (err < 0) return err; break; case SCARLETT_SWITCH_PAD: sprintf(mx, "Input %d Pad Switch", ctl->num); err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, scarlett_ctl_enum_resume, 0x01, 0x0b, ctl->num, USB_MIXER_S16, 1, mx, &opt_pad, &elem); if (err < 0) return err; break; } } return 0; } /* * Create and initialize a mixer for the Focusrite(R) Scarlett */ int snd_scarlett_controls_create(struct usb_mixer_interface *mixer) { int err, i, o; char mx[SNDRV_CTL_ELEM_ID_NAME_MAXLEN]; struct scarlett_device_info *info; struct usb_mixer_elem_info *elem; static char sample_rate_buffer[4] = { '\x80', '\xbb', '\x00', '\x00' }; /* only use UAC_VERSION_2 */ if (!mixer->protocol) return 0; switch (mixer->chip->usb_id) { case USB_ID(0x1235, 0x8012): info = &s6i6_info; break; case USB_ID(0x1235, 0x8002): info = &s8i6_info; break; case USB_ID(0x1235, 0x8004): info = &s18i6_info; break; case USB_ID(0x1235, 0x8014): info = &s18i8_info; break; case USB_ID(0x1235, 0x800c): info = &s18i20_info; break; default: /* device not (yet) supported */ return -EINVAL; } /* generic function to create controls */ err = scarlett_controls_create_generic(mixer, info); if (err < 0) return err; /* setup matrix controls */ for (i = 0; i < info->matrix_in; i++) { snprintf(mx, sizeof(mx), "Matrix %02d Input Playback Route", i+1); err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum, scarlett_ctl_enum_resume, 0x32, 0x06, i, USB_MIXER_S16, 1, mx, &info->opt_matrix, &elem); if (err < 0) return err; for (o = 0; o < info->matrix_out; o++) { sprintf(mx, "Matrix %02d Mix %c Playback Volume", i+1, o+'A'); err = add_new_ctl(mixer, &usb_scarlett_ctl, scarlett_ctl_resume, 0x3c, 0x00, (i << 3) + (o & 0x07), USB_MIXER_S16, 1, mx, NULL, &elem); if (err < 0) return err; } } for (i = 0; i < info->input_len; i++) { snprintf(mx, sizeof(mx), "Input Source %02d Capture Route", i+1); err = add_new_ctl(mixer, &usb_scarlett_ctl_dynamic_enum, scarlett_ctl_enum_resume, 0x34, 0x00, i, USB_MIXER_S16, 1, mx, &info->opt_master, &elem); if (err < 0) return err; } /* val_len == 1 needed here */ err = add_new_ctl(mixer, &usb_scarlett_ctl_enum, scarlett_ctl_enum_resume, 0x28, 0x01, 0, USB_MIXER_U8, 1, "Sample Clock Source", &opt_clock, &elem); if (err < 0) return err; /* val_len == 1 and UAC2_CS_MEM */ err = add_new_ctl(mixer, &usb_scarlett_ctl_sync, NULL, 0x3c, 0x00, 2, USB_MIXER_U8, 1, "Sample Clock Sync Status", &opt_sync, &elem); if (err < 0) return err; /* initialize sampling rate to 48000 */ err = snd_usb_ctl_msg(mixer->chip->dev, usb_sndctrlpipe(mixer->chip->dev, 0), UAC2_CS_CUR, USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT, 0x0100, snd_usb_ctrl_intf(mixer->chip) | (0x29 << 8), sample_rate_buffer, 4); if (err < 0) return err; return err; }