/* * Copyright (c) 2008-2011 Atheros Communications Inc. * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #include "hw.h" #include "hw-ops.h" #include /* Common calibration code */ static int16_t ath9k_hw_get_nf_hist_mid(int16_t *nfCalBuffer) { int16_t nfval; int16_t sort[ATH9K_NF_CAL_HIST_MAX]; int i, j; for (i = 0; i < ATH9K_NF_CAL_HIST_MAX; i++) sort[i] = nfCalBuffer[i]; for (i = 0; i < ATH9K_NF_CAL_HIST_MAX - 1; i++) { for (j = 1; j < ATH9K_NF_CAL_HIST_MAX - i; j++) { if (sort[j] > sort[j - 1]) { nfval = sort[j]; sort[j] = sort[j - 1]; sort[j - 1] = nfval; } } } nfval = sort[(ATH9K_NF_CAL_HIST_MAX - 1) >> 1]; return nfval; } static struct ath_nf_limits *ath9k_hw_get_nf_limits(struct ath_hw *ah, struct ath9k_channel *chan) { struct ath_nf_limits *limit; if (!chan || IS_CHAN_2GHZ(chan)) limit = &ah->nf_2g; else limit = &ah->nf_5g; return limit; } static s16 ath9k_hw_get_default_nf(struct ath_hw *ah, struct ath9k_channel *chan) { return ath9k_hw_get_nf_limits(ah, chan)->nominal; } s16 ath9k_hw_getchan_noise(struct ath_hw *ah, struct ath9k_channel *chan, s16 nf) { s8 noise = ATH_DEFAULT_NOISE_FLOOR; if (nf) { s8 delta = nf - ATH9K_NF_CAL_NOISE_THRESH - ath9k_hw_get_default_nf(ah, chan); if (delta > 0) noise += delta; } return noise; } EXPORT_SYMBOL(ath9k_hw_getchan_noise); static void ath9k_hw_update_nfcal_hist_buffer(struct ath_hw *ah, struct ath9k_hw_cal_data *cal, int16_t *nfarray) { struct ath_common *common = ath9k_hw_common(ah); struct ath_nf_limits *limit; struct ath9k_nfcal_hist *h; bool high_nf_mid = false; u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask; int i; h = cal->nfCalHist; limit = ath9k_hw_get_nf_limits(ah, ah->curchan); for (i = 0; i < NUM_NF_READINGS; i++) { if (!(chainmask & (1 << i)) || ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(ah->curchan))) continue; h[i].nfCalBuffer[h[i].currIndex] = nfarray[i]; if (++h[i].currIndex >= ATH9K_NF_CAL_HIST_MAX) h[i].currIndex = 0; if (h[i].invalidNFcount > 0) { h[i].invalidNFcount--; h[i].privNF = nfarray[i]; } else { h[i].privNF = ath9k_hw_get_nf_hist_mid(h[i].nfCalBuffer); } if (!h[i].privNF) continue; if (h[i].privNF > limit->max) { high_nf_mid = true; ath_dbg(common, CALIBRATE, "NFmid[%d] (%d) > MAX (%d), %s\n", i, h[i].privNF, limit->max, (test_bit(NFCAL_INTF, &cal->cal_flags) ? "not corrected (due to interference)" : "correcting to MAX")); /* * Normally we limit the average noise floor by the * hardware specific maximum here. However if we have * encountered stuck beacons because of interference, * we bypass this limit here in order to better deal * with our environment. */ if (!test_bit(NFCAL_INTF, &cal->cal_flags)) h[i].privNF = limit->max; } } /* * If the noise floor seems normal for all chains, assume that * there is no significant interference in the environment anymore. * Re-enable the enforcement of the NF maximum again. */ if (!high_nf_mid) clear_bit(NFCAL_INTF, &cal->cal_flags); } static bool ath9k_hw_get_nf_thresh(struct ath_hw *ah, enum nl80211_band band, int16_t *nft) { switch (band) { case NL80211_BAND_5GHZ: *nft = (int8_t)ah->eep_ops->get_eeprom(ah, EEP_NFTHRESH_5); break; case NL80211_BAND_2GHZ: *nft = (int8_t)ah->eep_ops->get_eeprom(ah, EEP_NFTHRESH_2); break; default: BUG_ON(1); return false; } return true; } void ath9k_hw_reset_calibration(struct ath_hw *ah, struct ath9k_cal_list *currCal) { int i; ath9k_hw_setup_calibration(ah, currCal); currCal->calState = CAL_RUNNING; for (i = 0; i < AR5416_MAX_CHAINS; i++) { ah->meas0.sign[i] = 0; ah->meas1.sign[i] = 0; ah->meas2.sign[i] = 0; ah->meas3.sign[i] = 0; } ah->cal_samples = 0; } /* This is done for the currently configured channel */ bool ath9k_hw_reset_calvalid(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); struct ath9k_cal_list *currCal = ah->cal_list_curr; if (!ah->caldata) return true; if (!AR_SREV_9100(ah) && !AR_SREV_9160_10_OR_LATER(ah)) return true; if (currCal == NULL) return true; if (currCal->calState != CAL_DONE) { ath_dbg(common, CALIBRATE, "Calibration state incorrect, %d\n", currCal->calState); return true; } if (!(ah->supp_cals & currCal->calData->calType)) return true; ath_dbg(common, CALIBRATE, "Resetting Cal %d state for channel %u\n", currCal->calData->calType, ah->curchan->chan->center_freq); ah->caldata->CalValid &= ~currCal->calData->calType; currCal->calState = CAL_WAITING; return false; } EXPORT_SYMBOL(ath9k_hw_reset_calvalid); void ath9k_hw_start_nfcal(struct ath_hw *ah, bool update) { if (ah->caldata) set_bit(NFCAL_PENDING, &ah->caldata->cal_flags); REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_ENABLE_NF); if (update) REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NO_UPDATE_NF); else REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NO_UPDATE_NF); REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); } int ath9k_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) { struct ath9k_nfcal_hist *h = NULL; unsigned i, j; u8 chainmask = (ah->rxchainmask << 3) | ah->rxchainmask; struct ath_common *common = ath9k_hw_common(ah); s16 default_nf = ath9k_hw_get_default_nf(ah, chan); u32 bb_agc_ctl = REG_READ(ah, AR_PHY_AGC_CONTROL); if (ah->caldata) h = ah->caldata->nfCalHist; ENABLE_REG_RMW_BUFFER(ah); for (i = 0; i < NUM_NF_READINGS; i++) { if (chainmask & (1 << i)) { s16 nfval; if ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(chan)) continue; if (ah->nf_override) nfval = ah->nf_override; else if (h) nfval = h[i].privNF; else nfval = default_nf; REG_RMW(ah, ah->nf_regs[i], (((u32) nfval << 1) & 0x1ff), 0x1ff); } } /* * stop NF cal if ongoing to ensure NF load completes immediately * (or after end rx/tx frame if ongoing) */ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) { REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); REG_RMW_BUFFER_FLUSH(ah); ENABLE_REG_RMW_BUFFER(ah); } /* * Load software filtered NF value into baseband internal minCCApwr * variable. */ REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_ENABLE_NF); REG_CLR_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NO_UPDATE_NF); REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); REG_RMW_BUFFER_FLUSH(ah); /* * Wait for load to complete, should be fast, a few 10s of us. * The max delay was changed from an original 250us to 22.2 msec. * This would increase timeout to the longest possible frame * (11n max length 22.1 msec) */ for (j = 0; j < 22200; j++) { if ((REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF) == 0) break; udelay(10); } /* * Restart NF so it can continue. */ if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NF) { ENABLE_REG_RMW_BUFFER(ah); if (bb_agc_ctl & AR_PHY_AGC_CONTROL_ENABLE_NF) REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_ENABLE_NF); if (bb_agc_ctl & AR_PHY_AGC_CONTROL_NO_UPDATE_NF) REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NO_UPDATE_NF); REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_NF); REG_RMW_BUFFER_FLUSH(ah); } /* * We timed out waiting for the noisefloor to load, probably due to an * in-progress rx. Simply return here and allow the load plenty of time * to complete before the next calibration interval. We need to avoid * trying to load -50 (which happens below) while the previous load is * still in progress as this can cause rx deafness. Instead by returning * here, the baseband nf cal will just be capped by our present * noisefloor until the next calibration timer. */ if (j == 22200) { ath_dbg(common, ANY, "Timeout while waiting for nf to load: AR_PHY_AGC_CONTROL=0x%x\n", REG_READ(ah, AR_PHY_AGC_CONTROL)); return -ETIMEDOUT; } /* * Restore maxCCAPower register parameter again so that we're not capped * by the median we just loaded. This will be initial (and max) value * of next noise floor calibration the baseband does. */ ENABLE_REG_RMW_BUFFER(ah); for (i = 0; i < NUM_NF_READINGS; i++) { if (chainmask & (1 << i)) { if ((i >= AR5416_MAX_CHAINS) && !IS_CHAN_HT40(chan)) continue; REG_RMW(ah, ah->nf_regs[i], (((u32) (-50) << 1) & 0x1ff), 0x1ff); } } REG_RMW_BUFFER_FLUSH(ah); return 0; } EXPORT_SYMBOL(ath9k_hw_loadnf); static void ath9k_hw_nf_sanitize(struct ath_hw *ah, s16 *nf) { struct ath_common *common = ath9k_hw_common(ah); struct ath_nf_limits *limit; int i; if (IS_CHAN_2GHZ(ah->curchan)) limit = &ah->nf_2g; else limit = &ah->nf_5g; for (i = 0; i < NUM_NF_READINGS; i++) { if (!nf[i]) continue; ath_dbg(common, CALIBRATE, "NF calibrated [%s] [chain %d] is %d\n", (i >= 3 ? "ext" : "ctl"), i % 3, nf[i]); if (nf[i] > limit->max) { ath_dbg(common, CALIBRATE, "NF[%d] (%d) > MAX (%d), correcting to MAX\n", i, nf[i], limit->max); nf[i] = limit->max; } else if (nf[i] < limit->min) { ath_dbg(common, CALIBRATE, "NF[%d] (%d) < MIN (%d), correcting to NOM\n", i, nf[i], limit->min); nf[i] = limit->nominal; } } } bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan) { struct ath_common *common = ath9k_hw_common(ah); int16_t nf, nfThresh; int16_t nfarray[NUM_NF_READINGS] = { 0 }; struct ath9k_nfcal_hist *h; struct ieee80211_channel *c = chan->chan; struct ath9k_hw_cal_data *caldata = ah->caldata; if (REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF) { ath_dbg(common, CALIBRATE, "NF did not complete in calibration window\n"); return false; } ath9k_hw_do_getnf(ah, nfarray); ath9k_hw_nf_sanitize(ah, nfarray); nf = nfarray[0]; if (ath9k_hw_get_nf_thresh(ah, c->band, &nfThresh) && nf > nfThresh) { ath_dbg(common, CALIBRATE, "noise floor failed detected; detected %d, threshold %d\n", nf, nfThresh); } if (!caldata) { chan->noisefloor = nf; return false; } h = caldata->nfCalHist; clear_bit(NFCAL_PENDING, &caldata->cal_flags); ath9k_hw_update_nfcal_hist_buffer(ah, caldata, nfarray); chan->noisefloor = h[0].privNF; ah->noise = ath9k_hw_getchan_noise(ah, chan, chan->noisefloor); return true; } EXPORT_SYMBOL(ath9k_hw_getnf); void ath9k_init_nfcal_hist_buffer(struct ath_hw *ah, struct ath9k_channel *chan) { struct ath9k_nfcal_hist *h; s16 default_nf; int i, j; ah->caldata->channel = chan->channel; ah->caldata->channelFlags = chan->channelFlags; h = ah->caldata->nfCalHist; default_nf = ath9k_hw_get_default_nf(ah, chan); for (i = 0; i < NUM_NF_READINGS; i++) { h[i].currIndex = 0; h[i].privNF = default_nf; h[i].invalidNFcount = AR_PHY_CCA_FILTERWINDOW_LENGTH; for (j = 0; j < ATH9K_NF_CAL_HIST_MAX; j++) { h[i].nfCalBuffer[j] = default_nf; } } } void ath9k_hw_bstuck_nfcal(struct ath_hw *ah) { struct ath9k_hw_cal_data *caldata = ah->caldata; if (unlikely(!caldata)) return; /* * If beacons are stuck, the most likely cause is interference. * Triggering a noise floor calibration at this point helps the * hardware adapt to a noisy environment much faster. * To ensure that we recover from stuck beacons quickly, let * the baseband update the internal NF value itself, similar to * what is being done after a full reset. */ if (!test_bit(NFCAL_PENDING, &caldata->cal_flags)) ath9k_hw_start_nfcal(ah, true); else if (!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF)) ath9k_hw_getnf(ah, ah->curchan); set_bit(NFCAL_INTF, &caldata->cal_flags); } EXPORT_SYMBOL(ath9k_hw_bstuck_nfcal);