/* * Xilinx Axi Ethernet device driver * * Copyright (c) 2008 Nissin Systems Co., Ltd., Yoshio Kashiwagi * Copyright (c) 2005-2008 DLA Systems, David H. Lynch Jr. * Copyright (c) 2008-2009 Secret Lab Technologies Ltd. * Copyright (c) 2010 - 2011 Michal Simek * Copyright (c) 2010 - 2011 PetaLogix * Copyright (c) 2010 - 2012 Xilinx, Inc. All rights reserved. * * This is a driver for the Xilinx Axi Ethernet which is used in the Virtex6 * and Spartan6. * * TODO: * - Add Axi Fifo support. * - Factor out Axi DMA code into separate driver. * - Test and fix basic multicast filtering. * - Add support for extended multicast filtering. * - Test basic VLAN support. * - Add support for extended VLAN support. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "xilinx_axienet.h" /* Descriptors defines for Tx and Rx DMA - 2^n for the best performance */ #define TX_BD_NUM 64 #define RX_BD_NUM 128 /* Must be shorter than length of ethtool_drvinfo.driver field to fit */ #define DRIVER_NAME "xaxienet" #define DRIVER_DESCRIPTION "Xilinx Axi Ethernet driver" #define DRIVER_VERSION "1.00a" #define AXIENET_REGS_N 32 /* Match table for of_platform binding */ static const struct of_device_id axienet_of_match[] = { { .compatible = "xlnx,axi-ethernet-1.00.a", }, { .compatible = "xlnx,axi-ethernet-1.01.a", }, { .compatible = "xlnx,axi-ethernet-2.01.a", }, {}, }; MODULE_DEVICE_TABLE(of, axienet_of_match); /* Option table for setting up Axi Ethernet hardware options */ static struct axienet_option axienet_options[] = { /* Turn on jumbo packet support for both Rx and Tx */ { .opt = XAE_OPTION_JUMBO, .reg = XAE_TC_OFFSET, .m_or = XAE_TC_JUM_MASK, }, { .opt = XAE_OPTION_JUMBO, .reg = XAE_RCW1_OFFSET, .m_or = XAE_RCW1_JUM_MASK, }, { /* Turn on VLAN packet support for both Rx and Tx */ .opt = XAE_OPTION_VLAN, .reg = XAE_TC_OFFSET, .m_or = XAE_TC_VLAN_MASK, }, { .opt = XAE_OPTION_VLAN, .reg = XAE_RCW1_OFFSET, .m_or = XAE_RCW1_VLAN_MASK, }, { /* Turn on FCS stripping on receive packets */ .opt = XAE_OPTION_FCS_STRIP, .reg = XAE_RCW1_OFFSET, .m_or = XAE_RCW1_FCS_MASK, }, { /* Turn on FCS insertion on transmit packets */ .opt = XAE_OPTION_FCS_INSERT, .reg = XAE_TC_OFFSET, .m_or = XAE_TC_FCS_MASK, }, { /* Turn off length/type field checking on receive packets */ .opt = XAE_OPTION_LENTYPE_ERR, .reg = XAE_RCW1_OFFSET, .m_or = XAE_RCW1_LT_DIS_MASK, }, { /* Turn on Rx flow control */ .opt = XAE_OPTION_FLOW_CONTROL, .reg = XAE_FCC_OFFSET, .m_or = XAE_FCC_FCRX_MASK, }, { /* Turn on Tx flow control */ .opt = XAE_OPTION_FLOW_CONTROL, .reg = XAE_FCC_OFFSET, .m_or = XAE_FCC_FCTX_MASK, }, { /* Turn on promiscuous frame filtering */ .opt = XAE_OPTION_PROMISC, .reg = XAE_FMI_OFFSET, .m_or = XAE_FMI_PM_MASK, }, { /* Enable transmitter */ .opt = XAE_OPTION_TXEN, .reg = XAE_TC_OFFSET, .m_or = XAE_TC_TX_MASK, }, { /* Enable receiver */ .opt = XAE_OPTION_RXEN, .reg = XAE_RCW1_OFFSET, .m_or = XAE_RCW1_RX_MASK, }, {} }; /** * axienet_dma_in32 - Memory mapped Axi DMA register read * @lp: Pointer to axienet local structure * @reg: Address offset from the base address of the Axi DMA core * * Return: The contents of the Axi DMA register * * This function returns the contents of the corresponding Axi DMA register. */ static inline u32 axienet_dma_in32(struct axienet_local *lp, off_t reg) { return in_be32(lp->dma_regs + reg); } /** * axienet_dma_out32 - Memory mapped Axi DMA register write. * @lp: Pointer to axienet local structure * @reg: Address offset from the base address of the Axi DMA core * @value: Value to be written into the Axi DMA register * * This function writes the desired value into the corresponding Axi DMA * register. */ static inline void axienet_dma_out32(struct axienet_local *lp, off_t reg, u32 value) { out_be32((lp->dma_regs + reg), value); } /** * axienet_dma_bd_release - Release buffer descriptor rings * @ndev: Pointer to the net_device structure * * This function is used to release the descriptors allocated in * axienet_dma_bd_init. axienet_dma_bd_release is called when Axi Ethernet * driver stop api is called. */ static void axienet_dma_bd_release(struct net_device *ndev) { int i; struct axienet_local *lp = netdev_priv(ndev); for (i = 0; i < RX_BD_NUM; i++) { dma_unmap_single(ndev->dev.parent, lp->rx_bd_v[i].phys, lp->max_frm_size, DMA_FROM_DEVICE); dev_kfree_skb((struct sk_buff *) (lp->rx_bd_v[i].sw_id_offset)); } if (lp->rx_bd_v) { dma_free_coherent(ndev->dev.parent, sizeof(*lp->rx_bd_v) * RX_BD_NUM, lp->rx_bd_v, lp->rx_bd_p); } if (lp->tx_bd_v) { dma_free_coherent(ndev->dev.parent, sizeof(*lp->tx_bd_v) * TX_BD_NUM, lp->tx_bd_v, lp->tx_bd_p); } } /** * axienet_dma_bd_init - Setup buffer descriptor rings for Axi DMA * @ndev: Pointer to the net_device structure * * Return: 0, on success -ENOMEM, on failure * * This function is called to initialize the Rx and Tx DMA descriptor * rings. This initializes the descriptors with required default values * and is called when Axi Ethernet driver reset is called. */ static int axienet_dma_bd_init(struct net_device *ndev) { u32 cr; int i; struct sk_buff *skb; struct axienet_local *lp = netdev_priv(ndev); /* Reset the indexes which are used for accessing the BDs */ lp->tx_bd_ci = 0; lp->tx_bd_tail = 0; lp->rx_bd_ci = 0; /* Allocate the Tx and Rx buffer descriptors. */ lp->tx_bd_v = dma_zalloc_coherent(ndev->dev.parent, sizeof(*lp->tx_bd_v) * TX_BD_NUM, &lp->tx_bd_p, GFP_KERNEL); if (!lp->tx_bd_v) goto out; lp->rx_bd_v = dma_zalloc_coherent(ndev->dev.parent, sizeof(*lp->rx_bd_v) * RX_BD_NUM, &lp->rx_bd_p, GFP_KERNEL); if (!lp->rx_bd_v) goto out; for (i = 0; i < TX_BD_NUM; i++) { lp->tx_bd_v[i].next = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * ((i + 1) % TX_BD_NUM); } for (i = 0; i < RX_BD_NUM; i++) { lp->rx_bd_v[i].next = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * ((i + 1) % RX_BD_NUM); skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size); if (!skb) goto out; lp->rx_bd_v[i].sw_id_offset = (u32) skb; lp->rx_bd_v[i].phys = dma_map_single(ndev->dev.parent, skb->data, lp->max_frm_size, DMA_FROM_DEVICE); lp->rx_bd_v[i].cntrl = lp->max_frm_size; } /* Start updating the Rx channel control register */ cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); /* Update the interrupt coalesce count */ cr = ((cr & ~XAXIDMA_COALESCE_MASK) | ((lp->coalesce_count_rx) << XAXIDMA_COALESCE_SHIFT)); /* Update the delay timer count */ cr = ((cr & ~XAXIDMA_DELAY_MASK) | (XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); /* Enable coalesce, delay timer and error interrupts */ cr |= XAXIDMA_IRQ_ALL_MASK; /* Write to the Rx channel control register */ axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); /* Start updating the Tx channel control register */ cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); /* Update the interrupt coalesce count */ cr = (((cr & ~XAXIDMA_COALESCE_MASK)) | ((lp->coalesce_count_tx) << XAXIDMA_COALESCE_SHIFT)); /* Update the delay timer count */ cr = (((cr & ~XAXIDMA_DELAY_MASK)) | (XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); /* Enable coalesce, delay timer and error interrupts */ cr |= XAXIDMA_IRQ_ALL_MASK; /* Write to the Tx channel control register */ axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); /* Populate the tail pointer and bring the Rx Axi DMA engine out of * halted state. This will make the Rx side ready for reception. */ axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p); cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr | XAXIDMA_CR_RUNSTOP_MASK); axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1))); /* Write to the RS (Run-stop) bit in the Tx channel control register. * Tx channel is now ready to run. But only after we write to the * tail pointer register that the Tx channel will start transmitting. */ axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p); cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr | XAXIDMA_CR_RUNSTOP_MASK); /* Wait for PhyRstCmplt bit to be set, indicating the PHY reset has finished */ ret = read_poll_timeout(axienet_ior, value, value & XAE_INT_PHYRSTCMPLT_MASK, DELAY_OF_ONE_MILLISEC, 50000, false, lp, XAE_IS_OFFSET); if (ret) { dev_err(lp->dev, "%s: timeout waiting for PhyRstCmplt\n", __func__); return ret; } return 0; out: axienet_dma_bd_release(ndev); return -ENOMEM; } /** * axienet_set_mac_address - Write the MAC address * @ndev: Pointer to the net_device structure * @address: 6 byte Address to be written as MAC address * * This function is called to initialize the MAC address of the Axi Ethernet * core. It writes to the UAW0 and UAW1 registers of the core. */ static void axienet_set_mac_address(struct net_device *ndev, const void *address) { struct axienet_local *lp = netdev_priv(ndev); if (address) memcpy(ndev->dev_addr, address, ETH_ALEN); if (!is_valid_ether_addr(ndev->dev_addr)) eth_hw_addr_random(ndev); /* Set up unicast MAC address filter set its mac address */ axienet_iow(lp, XAE_UAW0_OFFSET, (ndev->dev_addr[0]) | (ndev->dev_addr[1] << 8) | (ndev->dev_addr[2] << 16) | (ndev->dev_addr[3] << 24)); axienet_iow(lp, XAE_UAW1_OFFSET, (((axienet_ior(lp, XAE_UAW1_OFFSET)) & ~XAE_UAW1_UNICASTADDR_MASK) | (ndev->dev_addr[4] | (ndev->dev_addr[5] << 8)))); } /** * netdev_set_mac_address - Write the MAC address (from outside the driver) * @ndev: Pointer to the net_device structure * @p: 6 byte Address to be written as MAC address * * Return: 0 for all conditions. Presently, there is no failure case. * * This function is called to initialize the MAC address of the Axi Ethernet * core. It calls the core specific axienet_set_mac_address. This is the * function that goes into net_device_ops structure entry ndo_set_mac_address. */ static int netdev_set_mac_address(struct net_device *ndev, void *p) { struct sockaddr *addr = p; axienet_set_mac_address(ndev, addr->sa_data); return 0; } /** * axienet_set_multicast_list - Prepare the multicast table * @ndev: Pointer to the net_device structure * * This function is called to initialize the multicast table during * initialization. The Axi Ethernet basic multicast support has a four-entry * multicast table which is initialized here. Additionally this function * goes into the net_device_ops structure entry ndo_set_multicast_list. This * means whenever the multicast table entries need to be updated this * function gets called. */ static void axienet_set_multicast_list(struct net_device *ndev) { int i; u32 reg, af0reg, af1reg; struct axienet_local *lp = netdev_priv(ndev); if (ndev->flags & (IFF_ALLMULTI | IFF_PROMISC) || netdev_mc_count(ndev) > XAE_MULTICAST_CAM_TABLE_NUM) { /* We must make the kernel realize we had to move into * promiscuous mode. If it was a promiscuous mode request * the flag is already set. If not we set it. */ ndev->flags |= IFF_PROMISC; reg = axienet_ior(lp, XAE_FMI_OFFSET); reg |= XAE_FMI_PM_MASK; axienet_iow(lp, XAE_FMI_OFFSET, reg); dev_info(&ndev->dev, "Promiscuous mode enabled.\n"); } else if (!netdev_mc_empty(ndev)) { struct netdev_hw_addr *ha; i = 0; netdev_for_each_mc_addr(ha, ndev) { if (i >= XAE_MULTICAST_CAM_TABLE_NUM) break; af0reg = (ha->addr[0]); af0reg |= (ha->addr[1] << 8); af0reg |= (ha->addr[2] << 16); af0reg |= (ha->addr[3] << 24); af1reg = (ha->addr[4]); af1reg |= (ha->addr[5] << 8); reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00; reg |= i; axienet_iow(lp, XAE_FMI_OFFSET, reg); axienet_iow(lp, XAE_AF0_OFFSET, af0reg); axienet_iow(lp, XAE_AF1_OFFSET, af1reg); i++; } } else { reg = axienet_ior(lp, XAE_FMI_OFFSET); reg &= ~XAE_FMI_PM_MASK; axienet_iow(lp, XAE_FMI_OFFSET, reg); for (i = 0; i < XAE_MULTICAST_CAM_TABLE_NUM; i++) { reg = axienet_ior(lp, XAE_FMI_OFFSET) & 0xFFFFFF00; reg |= i; axienet_iow(lp, XAE_FMI_OFFSET, reg); axienet_iow(lp, XAE_AF0_OFFSET, 0); axienet_iow(lp, XAE_AF1_OFFSET, 0); } dev_info(&ndev->dev, "Promiscuous mode disabled.\n"); } } /** * axienet_setoptions - Set an Axi Ethernet option * @ndev: Pointer to the net_device structure * @options: Option to be enabled/disabled * * The Axi Ethernet core has multiple features which can be selectively turned * on or off. The typical options could be jumbo frame option, basic VLAN * option, promiscuous mode option etc. This function is used to set or clear * these options in the Axi Ethernet hardware. This is done through * axienet_option structure . */ static void axienet_setoptions(struct net_device *ndev, u32 options) { int reg; struct axienet_local *lp = netdev_priv(ndev); struct axienet_option *tp = &axienet_options[0]; while (tp->opt) { reg = ((axienet_ior(lp, tp->reg)) & ~(tp->m_or)); if (options & tp->opt) reg |= tp->m_or; axienet_iow(lp, tp->reg, reg); tp++; } lp->options |= options; } static void __axienet_device_reset(struct axienet_local *lp, off_t offset) { u32 timeout; /* Reset Axi DMA. This would reset Axi Ethernet core as well. The reset * process of Axi DMA takes a while to complete as all pending * commands/transfers will be flushed or completed during this * reset process. */ axienet_dma_out32(lp, offset, XAXIDMA_CR_RESET_MASK); timeout = DELAY_OF_ONE_MILLISEC; while (axienet_dma_in32(lp, offset) & XAXIDMA_CR_RESET_MASK) { udelay(1); if (--timeout == 0) { netdev_err(lp->ndev, "%s: DMA reset timeout!\n", __func__); break; } } } /** * axienet_device_reset - Reset and initialize the Axi Ethernet hardware. * @ndev: Pointer to the net_device structure * * This function is called to reset and initialize the Axi Ethernet core. This * is typically called during initialization. It does a reset of the Axi DMA * Rx/Tx channels and initializes the Axi DMA BDs. Since Axi DMA reset lines * areconnected to Axi Ethernet reset lines, this in turn resets the Axi * Ethernet core. No separate hardware reset is done for the Axi Ethernet * core. */ static void axienet_device_reset(struct net_device *ndev) { u32 axienet_status; struct axienet_local *lp = netdev_priv(ndev); __axienet_device_reset(lp, XAXIDMA_TX_CR_OFFSET); __axienet_device_reset(lp, XAXIDMA_RX_CR_OFFSET); lp->max_frm_size = XAE_MAX_VLAN_FRAME_SIZE; lp->options |= XAE_OPTION_VLAN; lp->options &= (~XAE_OPTION_JUMBO); if ((ndev->mtu > XAE_MTU) && (ndev->mtu <= XAE_JUMBO_MTU)) { lp->max_frm_size = ndev->mtu + VLAN_ETH_HLEN + XAE_TRL_SIZE; if (lp->max_frm_size <= lp->rxmem) lp->options |= XAE_OPTION_JUMBO; } if (axienet_dma_bd_init(ndev)) { netdev_err(ndev, "%s: descriptor allocation failed\n", __func__); } axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET); axienet_status &= ~XAE_RCW1_RX_MASK; axienet_iow(lp, XAE_RCW1_OFFSET, axienet_status); axienet_status = axienet_ior(lp, XAE_IP_OFFSET); if (axienet_status & XAE_INT_RXRJECT_MASK) axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK); axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK); /* Sync default options with HW but leave receiver and * transmitter disabled. */ axienet_setoptions(ndev, lp->options & ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); axienet_set_mac_address(ndev, NULL); axienet_set_multicast_list(ndev); axienet_setoptions(ndev, lp->options); netif_trans_update(ndev); } /** * axienet_adjust_link - Adjust the PHY link speed/duplex. * @ndev: Pointer to the net_device structure * * This function is called to change the speed and duplex setting after * auto negotiation is done by the PHY. This is the function that gets * registered with the PHY interface through the "of_phy_connect" call. */ static void axienet_adjust_link(struct net_device *ndev) { u32 emmc_reg; u32 link_state; u32 setspeed = 1; struct axienet_local *lp = netdev_priv(ndev); struct phy_device *phy = ndev->phydev; link_state = phy->speed | (phy->duplex << 1) | phy->link; if (lp->last_link != link_state) { if ((phy->speed == SPEED_10) || (phy->speed == SPEED_100)) { if (lp->phy_mode == PHY_INTERFACE_MODE_1000BASEX) setspeed = 0; } else { if ((phy->speed == SPEED_1000) && (lp->phy_mode == PHY_INTERFACE_MODE_MII)) setspeed = 0; } if (setspeed == 1) { emmc_reg = axienet_ior(lp, XAE_EMMC_OFFSET); emmc_reg &= ~XAE_EMMC_LINKSPEED_MASK; switch (phy->speed) { case SPEED_1000: emmc_reg |= XAE_EMMC_LINKSPD_1000; break; case SPEED_100: emmc_reg |= XAE_EMMC_LINKSPD_100; break; case SPEED_10: emmc_reg |= XAE_EMMC_LINKSPD_10; break; default: dev_err(&ndev->dev, "Speed other than 10, 100 " "or 1Gbps is not supported\n"); break; } axienet_iow(lp, XAE_EMMC_OFFSET, emmc_reg); lp->last_link = link_state; phy_print_status(phy); } else { netdev_err(ndev, "Error setting Axi Ethernet mac speed\n"); } } } /** * axienet_start_xmit_done - Invoked once a transmit is completed by the * Axi DMA Tx channel. * @ndev: Pointer to the net_device structure * * This function is invoked from the Axi DMA Tx isr to notify the completion * of transmit operation. It clears fields in the corresponding Tx BDs and * unmaps the corresponding buffer so that CPU can regain ownership of the * buffer. It finally invokes "netif_wake_queue" to restart transmission if * required. */ static void axienet_start_xmit_done(struct net_device *ndev) { u32 size = 0; u32 packets = 0; struct axienet_local *lp = netdev_priv(ndev); struct axidma_bd *cur_p; unsigned int status = 0; cur_p = &lp->tx_bd_v[lp->tx_bd_ci]; status = cur_p->status; while (status & XAXIDMA_BD_STS_COMPLETE_MASK) { dma_unmap_single(ndev->dev.parent, cur_p->phys, (cur_p->cntrl & XAXIDMA_BD_CTRL_LENGTH_MASK), DMA_TO_DEVICE); if (cur_p->app4) dev_kfree_skb_irq((struct sk_buff *)cur_p->app4); /*cur_p->phys = 0;*/ cur_p->app0 = 0; cur_p->app1 = 0; cur_p->app2 = 0; cur_p->app4 = 0; cur_p->status = 0; size += status & XAXIDMA_BD_STS_ACTUAL_LEN_MASK; packets++; ++lp->tx_bd_ci; lp->tx_bd_ci %= TX_BD_NUM; cur_p = &lp->tx_bd_v[lp->tx_bd_ci]; status = cur_p->status; } ndev->stats.tx_packets += packets; ndev->stats.tx_bytes += size; /* Matches barrier in axienet_start_xmit */ smp_mb(); netif_wake_queue(ndev); } /** * axienet_check_tx_bd_space - Checks if a BD/group of BDs are currently busy * @lp: Pointer to the axienet_local structure * @num_frag: The number of BDs to check for * * Return: 0, on success * NETDEV_TX_BUSY, if any of the descriptors are not free * * This function is invoked before BDs are allocated and transmission starts. * This function returns 0 if a BD or group of BDs can be allocated for * transmission. If the BD or any of the BDs are not free the function * returns a busy status. This is invoked from axienet_start_xmit. */ static inline int axienet_check_tx_bd_space(struct axienet_local *lp, int num_frag) { struct axidma_bd *cur_p; cur_p = &lp->tx_bd_v[(lp->tx_bd_tail + num_frag) % TX_BD_NUM]; if (cur_p->status & XAXIDMA_BD_STS_ALL_MASK) return NETDEV_TX_BUSY; return 0; } /** * axienet_start_xmit - Starts the transmission. * @skb: sk_buff pointer that contains data to be Txed. * @ndev: Pointer to net_device structure. * * Return: NETDEV_TX_OK, on success * NETDEV_TX_BUSY, if any of the descriptors are not free * * This function is invoked from upper layers to initiate transmission. The * function uses the next available free BDs and populates their fields to * start the transmission. Additionally if checksum offloading is supported, * it populates AXI Stream Control fields with appropriate values. */ static netdev_tx_t axienet_start_xmit(struct sk_buff *skb, struct net_device *ndev) { u32 ii; u32 num_frag; u32 csum_start_off; u32 csum_index_off; skb_frag_t *frag; dma_addr_t tail_p; struct axienet_local *lp = netdev_priv(ndev); struct axidma_bd *cur_p; num_frag = skb_shinfo(skb)->nr_frags; cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; if (axienet_check_tx_bd_space(lp, num_frag + 1)) { if (netif_queue_stopped(ndev)) return NETDEV_TX_BUSY; netif_stop_queue(ndev); /* Matches barrier in axienet_start_xmit_done */ smp_mb(); /* Space might have just been freed - check again */ if (axienet_check_tx_bd_space(lp, num_frag + 1)) return NETDEV_TX_BUSY; netif_wake_queue(ndev); } if (skb->ip_summed == CHECKSUM_PARTIAL) { if (lp->features & XAE_FEATURE_FULL_TX_CSUM) { /* Tx Full Checksum Offload Enabled */ cur_p->app0 |= 2; } else if (lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) { csum_start_off = skb_transport_offset(skb); csum_index_off = csum_start_off + skb->csum_offset; /* Tx Partial Checksum Offload Enabled */ cur_p->app0 |= 1; cur_p->app1 = (csum_start_off << 16) | csum_index_off; } } else if (skb->ip_summed == CHECKSUM_UNNECESSARY) { cur_p->app0 |= 2; /* Tx Full Checksum Offload Enabled */ } cur_p->cntrl = skb_headlen(skb) | XAXIDMA_BD_CTRL_TXSOF_MASK; cur_p->phys = dma_map_single(ndev->dev.parent, skb->data, skb_headlen(skb), DMA_TO_DEVICE); for (ii = 0; ii < num_frag; ii++) { ++lp->tx_bd_tail; lp->tx_bd_tail %= TX_BD_NUM; cur_p = &lp->tx_bd_v[lp->tx_bd_tail]; frag = &skb_shinfo(skb)->frags[ii]; cur_p->phys = dma_map_single(ndev->dev.parent, skb_frag_address(frag), skb_frag_size(frag), DMA_TO_DEVICE); cur_p->cntrl = skb_frag_size(frag); } cur_p->cntrl |= XAXIDMA_BD_CTRL_TXEOF_MASK; cur_p->app4 = (unsigned long)skb; tail_p = lp->tx_bd_p + sizeof(*lp->tx_bd_v) * lp->tx_bd_tail; /* Start the transfer */ axienet_dma_out32(lp, XAXIDMA_TX_TDESC_OFFSET, tail_p); ++lp->tx_bd_tail; lp->tx_bd_tail %= TX_BD_NUM; return NETDEV_TX_OK; } /** * axienet_recv - Is called from Axi DMA Rx Isr to complete the received * BD processing. * @ndev: Pointer to net_device structure. * * This function is invoked from the Axi DMA Rx isr to process the Rx BDs. It * does minimal processing and invokes "netif_rx" to complete further * processing. */ static void axienet_recv(struct net_device *ndev) { u32 length; u32 csumstatus; u32 size = 0; u32 packets = 0; dma_addr_t tail_p = 0; struct axienet_local *lp = netdev_priv(ndev); struct sk_buff *skb, *new_skb; struct axidma_bd *cur_p; cur_p = &lp->rx_bd_v[lp->rx_bd_ci]; while ((cur_p->status & XAXIDMA_BD_STS_COMPLETE_MASK)) { tail_p = lp->rx_bd_p + sizeof(*lp->rx_bd_v) * lp->rx_bd_ci; skb = (struct sk_buff *) (cur_p->sw_id_offset); length = cur_p->app4 & 0x0000FFFF; dma_unmap_single(ndev->dev.parent, cur_p->phys, lp->max_frm_size, DMA_FROM_DEVICE); skb_put(skb, length); skb->protocol = eth_type_trans(skb, ndev); /*skb_checksum_none_assert(skb);*/ skb->ip_summed = CHECKSUM_NONE; /* if we're doing Rx csum offload, set it up */ if (lp->features & XAE_FEATURE_FULL_RX_CSUM) { csumstatus = (cur_p->app2 & XAE_FULL_CSUM_STATUS_MASK) >> 3; if ((csumstatus == XAE_IP_TCP_CSUM_VALIDATED) || (csumstatus == XAE_IP_UDP_CSUM_VALIDATED)) { skb->ip_summed = CHECKSUM_UNNECESSARY; } } else if ((lp->features & XAE_FEATURE_PARTIAL_RX_CSUM) != 0 && skb->protocol == htons(ETH_P_IP) && skb->len > 64) { skb->csum = be32_to_cpu(cur_p->app3 & 0xFFFF); skb->ip_summed = CHECKSUM_COMPLETE; } netif_rx(skb); size += length; packets++; new_skb = netdev_alloc_skb_ip_align(ndev, lp->max_frm_size); if (!new_skb) return; cur_p->phys = dma_map_single(ndev->dev.parent, new_skb->data, lp->max_frm_size, DMA_FROM_DEVICE); cur_p->cntrl = lp->max_frm_size; cur_p->status = 0; cur_p->sw_id_offset = (u32) new_skb; ++lp->rx_bd_ci; lp->rx_bd_ci %= RX_BD_NUM; cur_p = &lp->rx_bd_v[lp->rx_bd_ci]; } ndev->stats.rx_packets += packets; ndev->stats.rx_bytes += size; if (tail_p) axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, tail_p); } /** * axienet_tx_irq - Tx Done Isr. * @irq: irq number * @_ndev: net_device pointer * * Return: IRQ_HANDLED for all cases. * * This is the Axi DMA Tx done Isr. It invokes "axienet_start_xmit_done" * to complete the BD processing. */ static irqreturn_t axienet_tx_irq(int irq, void *_ndev) { u32 cr; unsigned int status; struct net_device *ndev = _ndev; struct axienet_local *lp = netdev_priv(ndev); status = axienet_dma_in32(lp, XAXIDMA_TX_SR_OFFSET); if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) { axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status); axienet_start_xmit_done(lp->ndev); goto out; } if (!(status & XAXIDMA_IRQ_ALL_MASK)) dev_err(&ndev->dev, "No interrupts asserted in Tx path\n"); if (status & XAXIDMA_IRQ_ERROR_MASK) { dev_err(&ndev->dev, "DMA Tx error 0x%x\n", status); dev_err(&ndev->dev, "Current BD is at: 0x%x\n", (lp->tx_bd_v[lp->tx_bd_ci]).phys); cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); /* Disable coalesce, delay timer and error interrupts */ cr &= (~XAXIDMA_IRQ_ALL_MASK); /* Write to the Tx channel control register */ axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); /* Disable coalesce, delay timer and error interrupts */ cr &= (~XAXIDMA_IRQ_ALL_MASK); /* Write to the Rx channel control register */ axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); tasklet_schedule(&lp->dma_err_tasklet); axienet_dma_out32(lp, XAXIDMA_TX_SR_OFFSET, status); } out: return IRQ_HANDLED; } /** * axienet_rx_irq - Rx Isr. * @irq: irq number * @_ndev: net_device pointer * * Return: IRQ_HANDLED for all cases. * * This is the Axi DMA Rx Isr. It invokes "axienet_recv" to complete the BD * processing. */ static irqreturn_t axienet_rx_irq(int irq, void *_ndev) { u32 cr; unsigned int status; struct net_device *ndev = _ndev; struct axienet_local *lp = netdev_priv(ndev); status = axienet_dma_in32(lp, XAXIDMA_RX_SR_OFFSET); if (status & (XAXIDMA_IRQ_IOC_MASK | XAXIDMA_IRQ_DELAY_MASK)) { axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status); axienet_recv(lp->ndev); goto out; } if (!(status & XAXIDMA_IRQ_ALL_MASK)) dev_err(&ndev->dev, "No interrupts asserted in Rx path\n"); if (status & XAXIDMA_IRQ_ERROR_MASK) { dev_err(&ndev->dev, "DMA Rx error 0x%x\n", status); dev_err(&ndev->dev, "Current BD is at: 0x%x\n", (lp->rx_bd_v[lp->rx_bd_ci]).phys); cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); /* Disable coalesce, delay timer and error interrupts */ cr &= (~XAXIDMA_IRQ_ALL_MASK); /* Finally write to the Tx channel control register */ axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); /* Disable coalesce, delay timer and error interrupts */ cr &= (~XAXIDMA_IRQ_ALL_MASK); /* write to the Rx channel control register */ axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); tasklet_schedule(&lp->dma_err_tasklet); axienet_dma_out32(lp, XAXIDMA_RX_SR_OFFSET, status); } out: return IRQ_HANDLED; } static void axienet_dma_err_handler(unsigned long data); /** * axienet_open - Driver open routine. * @ndev: Pointer to net_device structure * * Return: 0, on success. * non-zero error value on failure * * This is the driver open routine. It calls phy_start to start the PHY device. * It also allocates interrupt service routines, enables the interrupt lines * and ISR handling. Axi Ethernet core is reset through Axi DMA core. Buffer * descriptors are initialized. */ static int axienet_open(struct net_device *ndev) { int ret, mdio_mcreg; struct axienet_local *lp = netdev_priv(ndev); struct phy_device *phydev = NULL; dev_dbg(&ndev->dev, "axienet_open()\n"); mdio_mcreg = axienet_ior(lp, XAE_MDIO_MC_OFFSET); ret = axienet_mdio_wait_until_ready(lp); if (ret < 0) return ret; /* Disable the MDIO interface till Axi Ethernet Reset is completed. * When we do an Axi Ethernet reset, it resets the complete core * including the MDIO. If MDIO is not disabled when the reset * process is started, MDIO will be broken afterwards. */ axienet_iow(lp, XAE_MDIO_MC_OFFSET, (mdio_mcreg & (~XAE_MDIO_MC_MDIOEN_MASK))); axienet_device_reset(ndev); /* Enable the MDIO */ axienet_iow(lp, XAE_MDIO_MC_OFFSET, mdio_mcreg); ret = axienet_mdio_wait_until_ready(lp); if (ret < 0) return ret; if (lp->phy_node) { phydev = of_phy_connect(lp->ndev, lp->phy_node, axienet_adjust_link, 0, lp->phy_mode); if (!phydev) dev_err(lp->dev, "of_phy_connect() failed\n"); else phy_start(phydev); } /* Enable tasklets for Axi DMA error handling */ tasklet_init(&lp->dma_err_tasklet, axienet_dma_err_handler, (unsigned long) lp); /* Enable interrupts for Axi DMA Tx */ ret = request_irq(lp->tx_irq, axienet_tx_irq, 0, ndev->name, ndev); if (ret) goto err_tx_irq; /* Enable interrupts for Axi DMA Rx */ ret = request_irq(lp->rx_irq, axienet_rx_irq, 0, ndev->name, ndev); if (ret) goto err_rx_irq; return 0; err_rx_irq: free_irq(lp->tx_irq, ndev); err_tx_irq: if (phydev) phy_disconnect(phydev); tasklet_kill(&lp->dma_err_tasklet); dev_err(lp->dev, "request_irq() failed\n"); return ret; } /** * axienet_stop - Driver stop routine. * @ndev: Pointer to net_device structure * * Return: 0, on success. * * This is the driver stop routine. It calls phy_disconnect to stop the PHY * device. It also removes the interrupt handlers and disables the interrupts. * The Axi DMA Tx/Rx BDs are released. */ static int axienet_stop(struct net_device *ndev) { u32 cr; struct axienet_local *lp = netdev_priv(ndev); dev_dbg(&ndev->dev, "axienet_close()\n"); cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr & (~XAXIDMA_CR_RUNSTOP_MASK)); cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr & (~XAXIDMA_CR_RUNSTOP_MASK)); axienet_setoptions(ndev, lp->options & ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); tasklet_kill(&lp->dma_err_tasklet); free_irq(lp->tx_irq, ndev); free_irq(lp->rx_irq, ndev); if (ndev->phydev) phy_disconnect(ndev->phydev); axienet_dma_bd_release(ndev); return 0; } /** * axienet_change_mtu - Driver change mtu routine. * @ndev: Pointer to net_device structure * @new_mtu: New mtu value to be applied * * Return: Always returns 0 (success). * * This is the change mtu driver routine. It checks if the Axi Ethernet * hardware supports jumbo frames before changing the mtu. This can be * called only when the device is not up. */ static int axienet_change_mtu(struct net_device *ndev, int new_mtu) { struct axienet_local *lp = netdev_priv(ndev); if (netif_running(ndev)) return -EBUSY; if ((new_mtu + VLAN_ETH_HLEN + XAE_TRL_SIZE) > lp->rxmem) return -EINVAL; ndev->mtu = new_mtu; return 0; } #ifdef CONFIG_NET_POLL_CONTROLLER /** * axienet_poll_controller - Axi Ethernet poll mechanism. * @ndev: Pointer to net_device structure * * This implements Rx/Tx ISR poll mechanisms. The interrupts are disabled prior * to polling the ISRs and are enabled back after the polling is done. */ static void axienet_poll_controller(struct net_device *ndev) { struct axienet_local *lp = netdev_priv(ndev); disable_irq(lp->tx_irq); disable_irq(lp->rx_irq); axienet_rx_irq(lp->tx_irq, ndev); axienet_tx_irq(lp->rx_irq, ndev); enable_irq(lp->tx_irq); enable_irq(lp->rx_irq); } #endif static const struct net_device_ops axienet_netdev_ops = { .ndo_open = axienet_open, .ndo_stop = axienet_stop, .ndo_start_xmit = axienet_start_xmit, .ndo_change_mtu = axienet_change_mtu, .ndo_set_mac_address = netdev_set_mac_address, .ndo_validate_addr = eth_validate_addr, .ndo_set_rx_mode = axienet_set_multicast_list, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = axienet_poll_controller, #endif }; /** * axienet_ethtools_get_drvinfo - Get various Axi Ethernet driver information. * @ndev: Pointer to net_device structure * @ed: Pointer to ethtool_drvinfo structure * * This implements ethtool command for getting the driver information. * Issue "ethtool -i ethX" under linux prompt to execute this function. */ static void axienet_ethtools_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *ed) { strlcpy(ed->driver, DRIVER_NAME, sizeof(ed->driver)); strlcpy(ed->version, DRIVER_VERSION, sizeof(ed->version)); } /** * axienet_ethtools_get_regs_len - Get the total regs length present in the * AxiEthernet core. * @ndev: Pointer to net_device structure * * This implements ethtool command for getting the total register length * information. * * Return: the total regs length */ static int axienet_ethtools_get_regs_len(struct net_device *ndev) { return sizeof(u32) * AXIENET_REGS_N; } /** * axienet_ethtools_get_regs - Dump the contents of all registers present * in AxiEthernet core. * @ndev: Pointer to net_device structure * @regs: Pointer to ethtool_regs structure * @ret: Void pointer used to return the contents of the registers. * * This implements ethtool command for getting the Axi Ethernet register dump. * Issue "ethtool -d ethX" to execute this function. */ static void axienet_ethtools_get_regs(struct net_device *ndev, struct ethtool_regs *regs, void *ret) { u32 *data = (u32 *) ret; size_t len = sizeof(u32) * AXIENET_REGS_N; struct axienet_local *lp = netdev_priv(ndev); regs->version = 0; regs->len = len; memset(data, 0, len); data[0] = axienet_ior(lp, XAE_RAF_OFFSET); data[1] = axienet_ior(lp, XAE_TPF_OFFSET); data[2] = axienet_ior(lp, XAE_IFGP_OFFSET); data[3] = axienet_ior(lp, XAE_IS_OFFSET); data[4] = axienet_ior(lp, XAE_IP_OFFSET); data[5] = axienet_ior(lp, XAE_IE_OFFSET); data[6] = axienet_ior(lp, XAE_TTAG_OFFSET); data[7] = axienet_ior(lp, XAE_RTAG_OFFSET); data[8] = axienet_ior(lp, XAE_UAWL_OFFSET); data[9] = axienet_ior(lp, XAE_UAWU_OFFSET); data[10] = axienet_ior(lp, XAE_TPID0_OFFSET); data[11] = axienet_ior(lp, XAE_TPID1_OFFSET); data[12] = axienet_ior(lp, XAE_PPST_OFFSET); data[13] = axienet_ior(lp, XAE_RCW0_OFFSET); data[14] = axienet_ior(lp, XAE_RCW1_OFFSET); data[15] = axienet_ior(lp, XAE_TC_OFFSET); data[16] = axienet_ior(lp, XAE_FCC_OFFSET); data[17] = axienet_ior(lp, XAE_EMMC_OFFSET); data[18] = axienet_ior(lp, XAE_PHYC_OFFSET); data[19] = axienet_ior(lp, XAE_MDIO_MC_OFFSET); data[20] = axienet_ior(lp, XAE_MDIO_MCR_OFFSET); data[21] = axienet_ior(lp, XAE_MDIO_MWD_OFFSET); data[22] = axienet_ior(lp, XAE_MDIO_MRD_OFFSET); data[23] = axienet_ior(lp, XAE_MDIO_MIS_OFFSET); data[24] = axienet_ior(lp, XAE_MDIO_MIP_OFFSET); data[25] = axienet_ior(lp, XAE_MDIO_MIE_OFFSET); data[26] = axienet_ior(lp, XAE_MDIO_MIC_OFFSET); data[27] = axienet_ior(lp, XAE_UAW0_OFFSET); data[28] = axienet_ior(lp, XAE_UAW1_OFFSET); data[29] = axienet_ior(lp, XAE_FMI_OFFSET); data[30] = axienet_ior(lp, XAE_AF0_OFFSET); data[31] = axienet_ior(lp, XAE_AF1_OFFSET); } /** * axienet_ethtools_get_pauseparam - Get the pause parameter setting for * Tx and Rx paths. * @ndev: Pointer to net_device structure * @epauseparm: Pointer to ethtool_pauseparam structure. * * This implements ethtool command for getting axi ethernet pause frame * setting. Issue "ethtool -a ethX" to execute this function. */ static void axienet_ethtools_get_pauseparam(struct net_device *ndev, struct ethtool_pauseparam *epauseparm) { u32 regval; struct axienet_local *lp = netdev_priv(ndev); epauseparm->autoneg = 0; regval = axienet_ior(lp, XAE_FCC_OFFSET); epauseparm->tx_pause = regval & XAE_FCC_FCTX_MASK; epauseparm->rx_pause = regval & XAE_FCC_FCRX_MASK; } /** * axienet_ethtools_set_pauseparam - Set device pause parameter(flow control) * settings. * @ndev: Pointer to net_device structure * @epauseparm:Pointer to ethtool_pauseparam structure * * This implements ethtool command for enabling flow control on Rx and Tx * paths. Issue "ethtool -A ethX tx on|off" under linux prompt to execute this * function. * * Return: 0 on success, -EFAULT if device is running */ static int axienet_ethtools_set_pauseparam(struct net_device *ndev, struct ethtool_pauseparam *epauseparm) { u32 regval = 0; struct axienet_local *lp = netdev_priv(ndev); if (netif_running(ndev)) { netdev_err(ndev, "Please stop netif before applying configuration\n"); return -EFAULT; } regval = axienet_ior(lp, XAE_FCC_OFFSET); if (epauseparm->tx_pause) regval |= XAE_FCC_FCTX_MASK; else regval &= ~XAE_FCC_FCTX_MASK; if (epauseparm->rx_pause) regval |= XAE_FCC_FCRX_MASK; else regval &= ~XAE_FCC_FCRX_MASK; axienet_iow(lp, XAE_FCC_OFFSET, regval); return 0; } /** * axienet_ethtools_get_coalesce - Get DMA interrupt coalescing count. * @ndev: Pointer to net_device structure * @ecoalesce: Pointer to ethtool_coalesce structure * * This implements ethtool command for getting the DMA interrupt coalescing * count on Tx and Rx paths. Issue "ethtool -c ethX" under linux prompt to * execute this function. * * Return: 0 always */ static int axienet_ethtools_get_coalesce(struct net_device *ndev, struct ethtool_coalesce *ecoalesce) { u32 regval = 0; struct axienet_local *lp = netdev_priv(ndev); regval = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); ecoalesce->rx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK) >> XAXIDMA_COALESCE_SHIFT; regval = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); ecoalesce->tx_max_coalesced_frames = (regval & XAXIDMA_COALESCE_MASK) >> XAXIDMA_COALESCE_SHIFT; return 0; } /** * axienet_ethtools_set_coalesce - Set DMA interrupt coalescing count. * @ndev: Pointer to net_device structure * @ecoalesce: Pointer to ethtool_coalesce structure * * This implements ethtool command for setting the DMA interrupt coalescing * count on Tx and Rx paths. Issue "ethtool -C ethX rx-frames 5" under linux * prompt to execute this function. * * Return: 0, on success, Non-zero error value on failure. */ static int axienet_ethtools_set_coalesce(struct net_device *ndev, struct ethtool_coalesce *ecoalesce) { struct axienet_local *lp = netdev_priv(ndev); if (netif_running(ndev)) { netdev_err(ndev, "Please stop netif before applying configuration\n"); return -EFAULT; } if ((ecoalesce->rx_coalesce_usecs) || (ecoalesce->rx_coalesce_usecs_irq) || (ecoalesce->rx_max_coalesced_frames_irq) || (ecoalesce->tx_coalesce_usecs) || (ecoalesce->tx_coalesce_usecs_irq) || (ecoalesce->tx_max_coalesced_frames_irq) || (ecoalesce->stats_block_coalesce_usecs) || (ecoalesce->use_adaptive_rx_coalesce) || (ecoalesce->use_adaptive_tx_coalesce) || (ecoalesce->pkt_rate_low) || (ecoalesce->rx_coalesce_usecs_low) || (ecoalesce->rx_max_coalesced_frames_low) || (ecoalesce->tx_coalesce_usecs_low) || (ecoalesce->tx_max_coalesced_frames_low) || (ecoalesce->pkt_rate_high) || (ecoalesce->rx_coalesce_usecs_high) || (ecoalesce->rx_max_coalesced_frames_high) || (ecoalesce->tx_coalesce_usecs_high) || (ecoalesce->tx_max_coalesced_frames_high) || (ecoalesce->rate_sample_interval)) return -EOPNOTSUPP; if (ecoalesce->rx_max_coalesced_frames) lp->coalesce_count_rx = ecoalesce->rx_max_coalesced_frames; if (ecoalesce->tx_max_coalesced_frames) lp->coalesce_count_tx = ecoalesce->tx_max_coalesced_frames; return 0; } static const struct ethtool_ops axienet_ethtool_ops = { .get_drvinfo = axienet_ethtools_get_drvinfo, .get_regs_len = axienet_ethtools_get_regs_len, .get_regs = axienet_ethtools_get_regs, .get_link = ethtool_op_get_link, .get_pauseparam = axienet_ethtools_get_pauseparam, .set_pauseparam = axienet_ethtools_set_pauseparam, .get_coalesce = axienet_ethtools_get_coalesce, .set_coalesce = axienet_ethtools_set_coalesce, .get_link_ksettings = phy_ethtool_get_link_ksettings, .set_link_ksettings = phy_ethtool_set_link_ksettings, }; /** * axienet_dma_err_handler - Tasklet handler for Axi DMA Error * @data: Data passed * * Resets the Axi DMA and Axi Ethernet devices, and reconfigures the * Tx/Rx BDs. */ static void axienet_dma_err_handler(unsigned long data) { u32 axienet_status; u32 cr, i; int mdio_mcreg; struct axienet_local *lp = (struct axienet_local *) data; struct net_device *ndev = lp->ndev; struct axidma_bd *cur_p; axienet_setoptions(ndev, lp->options & ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); mdio_mcreg = axienet_ior(lp, XAE_MDIO_MC_OFFSET); axienet_mdio_wait_until_ready(lp); /* Disable the MDIO interface till Axi Ethernet Reset is completed. * When we do an Axi Ethernet reset, it resets the complete core * including the MDIO. So if MDIO is not disabled when the reset * process is started, MDIO will be broken afterwards. */ axienet_iow(lp, XAE_MDIO_MC_OFFSET, (mdio_mcreg & ~XAE_MDIO_MC_MDIOEN_MASK)); __axienet_device_reset(lp, XAXIDMA_TX_CR_OFFSET); __axienet_device_reset(lp, XAXIDMA_RX_CR_OFFSET); axienet_iow(lp, XAE_MDIO_MC_OFFSET, mdio_mcreg); axienet_mdio_wait_until_ready(lp); for (i = 0; i < TX_BD_NUM; i++) { cur_p = &lp->tx_bd_v[i]; if (cur_p->phys) dma_unmap_single(ndev->dev.parent, cur_p->phys, (cur_p->cntrl & XAXIDMA_BD_CTRL_LENGTH_MASK), DMA_TO_DEVICE); if (cur_p->app4) dev_kfree_skb_irq((struct sk_buff *) cur_p->app4); cur_p->phys = 0; cur_p->cntrl = 0; cur_p->status = 0; cur_p->app0 = 0; cur_p->app1 = 0; cur_p->app2 = 0; cur_p->app3 = 0; cur_p->app4 = 0; cur_p->sw_id_offset = 0; } for (i = 0; i < RX_BD_NUM; i++) { cur_p = &lp->rx_bd_v[i]; cur_p->status = 0; cur_p->app0 = 0; cur_p->app1 = 0; cur_p->app2 = 0; cur_p->app3 = 0; cur_p->app4 = 0; } lp->tx_bd_ci = 0; lp->tx_bd_tail = 0; lp->rx_bd_ci = 0; /* Start updating the Rx channel control register */ cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); /* Update the interrupt coalesce count */ cr = ((cr & ~XAXIDMA_COALESCE_MASK) | (XAXIDMA_DFT_RX_THRESHOLD << XAXIDMA_COALESCE_SHIFT)); /* Update the delay timer count */ cr = ((cr & ~XAXIDMA_DELAY_MASK) | (XAXIDMA_DFT_RX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); /* Enable coalesce, delay timer and error interrupts */ cr |= XAXIDMA_IRQ_ALL_MASK; /* Finally write to the Rx channel control register */ axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr); /* Start updating the Tx channel control register */ cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); /* Update the interrupt coalesce count */ cr = (((cr & ~XAXIDMA_COALESCE_MASK)) | (XAXIDMA_DFT_TX_THRESHOLD << XAXIDMA_COALESCE_SHIFT)); /* Update the delay timer count */ cr = (((cr & ~XAXIDMA_DELAY_MASK)) | (XAXIDMA_DFT_TX_WAITBOUND << XAXIDMA_DELAY_SHIFT)); /* Enable coalesce, delay timer and error interrupts */ cr |= XAXIDMA_IRQ_ALL_MASK; /* Finally write to the Tx channel control register */ axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr); /* Populate the tail pointer and bring the Rx Axi DMA engine out of * halted state. This will make the Rx side ready for reception. */ axienet_dma_out32(lp, XAXIDMA_RX_CDESC_OFFSET, lp->rx_bd_p); cr = axienet_dma_in32(lp, XAXIDMA_RX_CR_OFFSET); axienet_dma_out32(lp, XAXIDMA_RX_CR_OFFSET, cr | XAXIDMA_CR_RUNSTOP_MASK); axienet_dma_out32(lp, XAXIDMA_RX_TDESC_OFFSET, lp->rx_bd_p + (sizeof(*lp->rx_bd_v) * (RX_BD_NUM - 1))); /* Write to the RS (Run-stop) bit in the Tx channel control register. * Tx channel is now ready to run. But only after we write to the * tail pointer register that the Tx channel will start transmitting */ axienet_dma_out32(lp, XAXIDMA_TX_CDESC_OFFSET, lp->tx_bd_p); cr = axienet_dma_in32(lp, XAXIDMA_TX_CR_OFFSET); axienet_dma_out32(lp, XAXIDMA_TX_CR_OFFSET, cr | XAXIDMA_CR_RUNSTOP_MASK); axienet_status = axienet_ior(lp, XAE_RCW1_OFFSET); axienet_status &= ~XAE_RCW1_RX_MASK; axienet_iow(lp, XAE_RCW1_OFFSET, axienet_status); axienet_status = axienet_ior(lp, XAE_IP_OFFSET); if (axienet_status & XAE_INT_RXRJECT_MASK) axienet_iow(lp, XAE_IS_OFFSET, XAE_INT_RXRJECT_MASK); axienet_iow(lp, XAE_FCC_OFFSET, XAE_FCC_FCRX_MASK); /* Sync default options with HW but leave receiver and * transmitter disabled. */ axienet_setoptions(ndev, lp->options & ~(XAE_OPTION_TXEN | XAE_OPTION_RXEN)); axienet_set_mac_address(ndev, NULL); axienet_set_multicast_list(ndev); axienet_setoptions(ndev, lp->options); } /** * axienet_probe - Axi Ethernet probe function. * @pdev: Pointer to platform device structure. * * Return: 0, on success * Non-zero error value on failure. * * This is the probe routine for Axi Ethernet driver. This is called before * any other driver routines are invoked. It allocates and sets up the Ethernet * device. Parses through device tree and populates fields of * axienet_local. It registers the Ethernet device. */ static int axienet_probe(struct platform_device *pdev) { int ret; struct device_node *np; struct axienet_local *lp; struct net_device *ndev; const void *mac_addr; struct resource *ethres, dmares; u32 value; ndev = alloc_etherdev(sizeof(*lp)); if (!ndev) return -ENOMEM; platform_set_drvdata(pdev, ndev); SET_NETDEV_DEV(ndev, &pdev->dev); ndev->flags &= ~IFF_MULTICAST; /* clear multicast */ ndev->features = NETIF_F_SG; ndev->netdev_ops = &axienet_netdev_ops; ndev->ethtool_ops = &axienet_ethtool_ops; /* MTU range: 64 - 9000 */ ndev->min_mtu = 64; ndev->max_mtu = XAE_JUMBO_MTU; lp = netdev_priv(ndev); lp->ndev = ndev; lp->dev = &pdev->dev; lp->options = XAE_OPTION_DEFAULTS; /* Map device registers */ ethres = platform_get_resource(pdev, IORESOURCE_MEM, 0); lp->regs = devm_ioremap_resource(&pdev->dev, ethres); if (IS_ERR(lp->regs)) { dev_err(&pdev->dev, "could not map Axi Ethernet regs.\n"); ret = PTR_ERR(lp->regs); goto free_netdev; } /* Setup checksum offload, but default to off if not specified */ lp->features = 0; ret = of_property_read_u32(pdev->dev.of_node, "xlnx,txcsum", &value); if (!ret) { switch (value) { case 1: lp->csum_offload_on_tx_path = XAE_FEATURE_PARTIAL_TX_CSUM; lp->features |= XAE_FEATURE_PARTIAL_TX_CSUM; /* Can checksum TCP/UDP over IPv4. */ ndev->features |= NETIF_F_IP_CSUM; break; case 2: lp->csum_offload_on_tx_path = XAE_FEATURE_FULL_TX_CSUM; lp->features |= XAE_FEATURE_FULL_TX_CSUM; /* Can checksum TCP/UDP over IPv4. */ ndev->features |= NETIF_F_IP_CSUM; break; default: lp->csum_offload_on_tx_path = XAE_NO_CSUM_OFFLOAD; } } ret = of_property_read_u32(pdev->dev.of_node, "xlnx,rxcsum", &value); if (!ret) { switch (value) { case 1: lp->csum_offload_on_rx_path = XAE_FEATURE_PARTIAL_RX_CSUM; lp->features |= XAE_FEATURE_PARTIAL_RX_CSUM; break; case 2: lp->csum_offload_on_rx_path = XAE_FEATURE_FULL_RX_CSUM; lp->features |= XAE_FEATURE_FULL_RX_CSUM; break; default: lp->csum_offload_on_rx_path = XAE_NO_CSUM_OFFLOAD; } } /* For supporting jumbo frames, the Axi Ethernet hardware must have * a larger Rx/Tx Memory. Typically, the size must be large so that * we can enable jumbo option and start supporting jumbo frames. * Here we check for memory allocated for Rx/Tx in the hardware from * the device-tree and accordingly set flags. */ of_property_read_u32(pdev->dev.of_node, "xlnx,rxmem", &lp->rxmem); /* Start with the proprietary, and broken phy_type */ ret = of_property_read_u32(pdev->dev.of_node, "xlnx,phy-type", &value); if (!ret) { netdev_warn(ndev, "Please upgrade your device tree binary blob to use phy-mode"); switch (value) { case XAE_PHY_TYPE_MII: lp->phy_mode = PHY_INTERFACE_MODE_MII; break; case XAE_PHY_TYPE_GMII: lp->phy_mode = PHY_INTERFACE_MODE_GMII; break; case XAE_PHY_TYPE_RGMII_2_0: lp->phy_mode = PHY_INTERFACE_MODE_RGMII_ID; break; case XAE_PHY_TYPE_SGMII: lp->phy_mode = PHY_INTERFACE_MODE_SGMII; break; case XAE_PHY_TYPE_1000BASE_X: lp->phy_mode = PHY_INTERFACE_MODE_1000BASEX; break; default: ret = -EINVAL; goto free_netdev; } } else { lp->phy_mode = of_get_phy_mode(pdev->dev.of_node); if ((int)lp->phy_mode < 0) { ret = -EINVAL; goto free_netdev; } } /* Find the DMA node, map the DMA registers, and decode the DMA IRQs */ np = of_parse_phandle(pdev->dev.of_node, "axistream-connected", 0); if (!np) { dev_err(&pdev->dev, "could not find DMA node\n"); ret = -ENODEV; goto free_netdev; } ret = of_address_to_resource(np, 0, &dmares); if (ret) { dev_err(&pdev->dev, "unable to get DMA resource\n"); of_node_put(np); goto free_netdev; } lp->dma_regs = devm_ioremap_resource(&pdev->dev, &dmares); if (IS_ERR(lp->dma_regs)) { dev_err(&pdev->dev, "could not map DMA regs\n"); ret = PTR_ERR(lp->dma_regs); of_node_put(np); goto free_netdev; } lp->rx_irq = irq_of_parse_and_map(np, 1); lp->tx_irq = irq_of_parse_and_map(np, 0); of_node_put(np); if ((lp->rx_irq <= 0) || (lp->tx_irq <= 0)) { dev_err(&pdev->dev, "could not determine irqs\n"); ret = -ENOMEM; goto free_netdev; } /* Retrieve the MAC address */ mac_addr = of_get_mac_address(pdev->dev.of_node); if (!mac_addr) { dev_err(&pdev->dev, "could not find MAC address\n"); goto free_netdev; } axienet_set_mac_address(ndev, mac_addr); lp->coalesce_count_rx = XAXIDMA_DFT_RX_THRESHOLD; lp->coalesce_count_tx = XAXIDMA_DFT_TX_THRESHOLD; lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); if (lp->phy_node) { ret = axienet_mdio_setup(lp, pdev->dev.of_node); if (ret) dev_warn(&pdev->dev, "error registering MDIO bus\n"); } ret = register_netdev(lp->ndev); if (ret) { dev_err(lp->dev, "register_netdev() error (%i)\n", ret); goto free_netdev; } return 0; free_netdev: free_netdev(ndev); return ret; } static int axienet_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct axienet_local *lp = netdev_priv(ndev); axienet_mdio_teardown(lp); unregister_netdev(ndev); of_node_put(lp->phy_node); lp->phy_node = NULL; free_netdev(ndev); return 0; } static struct platform_driver axienet_driver = { .probe = axienet_probe, .remove = axienet_remove, .driver = { .name = "xilinx_axienet", .of_match_table = axienet_of_match, }, }; module_platform_driver(axienet_driver); MODULE_DESCRIPTION("Xilinx Axi Ethernet driver"); MODULE_AUTHOR("Xilinx"); MODULE_LICENSE("GPL");