/* * Copyright © 2014 Intel Corporation * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS * IN THE SOFTWARE. * */ #include #include #include "i915_drv.h" #include "intel_guc.h" /** * DOC: GuC-based command submission * * i915_guc_client: * We use the term client to avoid confusion with contexts. A i915_guc_client is * equivalent to GuC object guc_context_desc. This context descriptor is * allocated from a pool of 1024 entries. Kernel driver will allocate doorbell * and workqueue for it. Also the process descriptor (guc_process_desc), which * is mapped to client space. So the client can write Work Item then ring the * doorbell. * * To simplify the implementation, we allocate one gem object that contains all * pages for doorbell, process descriptor and workqueue. * * The Scratch registers: * There are 16 MMIO-based registers start from 0xC180. The kernel driver writes * a value to the action register (SOFT_SCRATCH_0) along with any data. It then * triggers an interrupt on the GuC via another register write (0xC4C8). * Firmware writes a success/fail code back to the action register after * processes the request. The kernel driver polls waiting for this update and * then proceeds. * See host2guc_action() * * Doorbells: * Doorbells are interrupts to uKernel. A doorbell is a single cache line (QW) * mapped into process space. * * Work Items: * There are several types of work items that the host may place into a * workqueue, each with its own requirements and limitations. Currently only * WQ_TYPE_INORDER is needed to support legacy submission via GuC, which * represents in-order queue. The kernel driver packs ring tail pointer and an * ELSP context descriptor dword into Work Item. * See guc_add_workqueue_item() * */ /* * Read GuC command/status register (SOFT_SCRATCH_0) * Return true if it contains a response rather than a command */ static inline bool host2guc_action_response(struct drm_i915_private *dev_priv, u32 *status) { u32 val = I915_READ(SOFT_SCRATCH(0)); *status = val; return GUC2HOST_IS_RESPONSE(val); } static int host2guc_action(struct intel_guc *guc, u32 *data, u32 len) { struct drm_i915_private *dev_priv = guc_to_i915(guc); u32 status; int i; int ret; if (WARN_ON(len < 1 || len > 15)) return -EINVAL; intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL); dev_priv->guc.action_count += 1; dev_priv->guc.action_cmd = data[0]; for (i = 0; i < len; i++) I915_WRITE(SOFT_SCRATCH(i), data[i]); POSTING_READ(SOFT_SCRATCH(i - 1)); I915_WRITE(HOST2GUC_INTERRUPT, HOST2GUC_TRIGGER); /* * Fast commands should complete in less than 10us, so sample quickly * up to that length of time, then switch to a slower sleep-wait loop. * No HOST2GUC command should ever take longer than 10ms. */ ret = wait_for_us(host2guc_action_response(dev_priv, &status), 10); if (ret) ret = wait_for(host2guc_action_response(dev_priv, &status), 10); if (status != GUC2HOST_STATUS_SUCCESS) { /* * Either the GuC explicitly returned an error (which * we convert to -EIO here) or no response at all was * received within the timeout limit (-ETIMEDOUT) */ if (ret != -ETIMEDOUT) ret = -EIO; DRM_ERROR("GUC: host2guc action 0x%X failed. ret=%d " "status=0x%08X response=0x%08X\n", data[0], ret, status, I915_READ(SOFT_SCRATCH(15))); dev_priv->guc.action_fail += 1; dev_priv->guc.action_err = ret; } dev_priv->guc.action_status = status; intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL); return ret; } /* * Tell the GuC to allocate or deallocate a specific doorbell */ static int host2guc_allocate_doorbell(struct intel_guc *guc, struct i915_guc_client *client) { u32 data[2]; data[0] = HOST2GUC_ACTION_ALLOCATE_DOORBELL; data[1] = client->ctx_index; return host2guc_action(guc, data, 2); } static int host2guc_release_doorbell(struct intel_guc *guc, struct i915_guc_client *client) { u32 data[2]; data[0] = HOST2GUC_ACTION_DEALLOCATE_DOORBELL; data[1] = client->ctx_index; return host2guc_action(guc, data, 2); } static int host2guc_sample_forcewake(struct intel_guc *guc, struct i915_guc_client *client) { struct drm_i915_private *dev_priv = guc_to_i915(guc); u32 data[2]; data[0] = HOST2GUC_ACTION_SAMPLE_FORCEWAKE; /* WaRsDisableCoarsePowerGating:skl,bxt */ if (!intel_enable_rc6() || NEEDS_WaRsDisableCoarsePowerGating(dev_priv)) data[1] = 0; else /* bit 0 and 1 are for Render and Media domain separately */ data[1] = GUC_FORCEWAKE_RENDER | GUC_FORCEWAKE_MEDIA; return host2guc_action(guc, data, ARRAY_SIZE(data)); } /* * Initialise, update, or clear doorbell data shared with the GuC * * These functions modify shared data and so need access to the mapped * client object which contains the page being used for the doorbell */ static int guc_update_doorbell_id(struct intel_guc *guc, struct i915_guc_client *client, u16 new_id) { struct sg_table *sg = guc->ctx_pool_obj->pages; void *doorbell_bitmap = guc->doorbell_bitmap; struct guc_doorbell_info *doorbell; struct guc_context_desc desc; size_t len; doorbell = client->client_base + client->doorbell_offset; if (client->doorbell_id != GUC_INVALID_DOORBELL_ID && test_bit(client->doorbell_id, doorbell_bitmap)) { /* Deactivate the old doorbell */ doorbell->db_status = GUC_DOORBELL_DISABLED; (void)host2guc_release_doorbell(guc, client); __clear_bit(client->doorbell_id, doorbell_bitmap); } /* Update the GuC's idea of the doorbell ID */ len = sg_pcopy_to_buffer(sg->sgl, sg->nents, &desc, sizeof(desc), sizeof(desc) * client->ctx_index); if (len != sizeof(desc)) return -EFAULT; desc.db_id = new_id; len = sg_pcopy_from_buffer(sg->sgl, sg->nents, &desc, sizeof(desc), sizeof(desc) * client->ctx_index); if (len != sizeof(desc)) return -EFAULT; client->doorbell_id = new_id; if (new_id == GUC_INVALID_DOORBELL_ID) return 0; /* Activate the new doorbell */ __set_bit(new_id, doorbell_bitmap); doorbell->cookie = 0; doorbell->db_status = GUC_DOORBELL_ENABLED; return host2guc_allocate_doorbell(guc, client); } static int guc_init_doorbell(struct intel_guc *guc, struct i915_guc_client *client, uint16_t db_id) { return guc_update_doorbell_id(guc, client, db_id); } static void guc_disable_doorbell(struct intel_guc *guc, struct i915_guc_client *client) { (void)guc_update_doorbell_id(guc, client, GUC_INVALID_DOORBELL_ID); /* XXX: wait for any interrupts */ /* XXX: wait for workqueue to drain */ } static uint16_t select_doorbell_register(struct intel_guc *guc, uint32_t priority) { /* * The bitmap tracks which doorbell registers are currently in use. * It is split into two halves; the first half is used for normal * priority contexts, the second half for high-priority ones. * Note that logically higher priorities are numerically less than * normal ones, so the test below means "is it high-priority?" */ const bool hi_pri = (priority <= GUC_CTX_PRIORITY_HIGH); const uint16_t half = GUC_MAX_DOORBELLS / 2; const uint16_t start = hi_pri ? half : 0; const uint16_t end = start + half; uint16_t id; id = find_next_zero_bit(guc->doorbell_bitmap, end, start); if (id == end) id = GUC_INVALID_DOORBELL_ID; DRM_DEBUG_DRIVER("assigned %s priority doorbell id 0x%x\n", hi_pri ? "high" : "normal", id); return id; } /* * Select, assign and relase doorbell cachelines * * These functions track which doorbell cachelines are in use. * The data they manipulate is protected by the host2guc lock. */ static uint32_t select_doorbell_cacheline(struct intel_guc *guc) { const uint32_t cacheline_size = cache_line_size(); uint32_t offset; /* Doorbell uses a single cache line within a page */ offset = offset_in_page(guc->db_cacheline); /* Moving to next cache line to reduce contention */ guc->db_cacheline += cacheline_size; DRM_DEBUG_DRIVER("selected doorbell cacheline 0x%x, next 0x%x, linesize %u\n", offset, guc->db_cacheline, cacheline_size); return offset; } /* * Initialise the process descriptor shared with the GuC firmware. */ static void guc_init_proc_desc(struct intel_guc *guc, struct i915_guc_client *client) { struct guc_process_desc *desc; desc = client->client_base + client->proc_desc_offset; memset(desc, 0, sizeof(*desc)); /* * XXX: pDoorbell and WQVBaseAddress are pointers in process address * space for ring3 clients (set them as in mmap_ioctl) or kernel * space for kernel clients (map on demand instead? May make debug * easier to have it mapped). */ desc->wq_base_addr = 0; desc->db_base_addr = 0; desc->context_id = client->ctx_index; desc->wq_size_bytes = client->wq_size; desc->wq_status = WQ_STATUS_ACTIVE; desc->priority = client->priority; } /* * Initialise/clear the context descriptor shared with the GuC firmware. * * This descriptor tells the GuC where (in GGTT space) to find the important * data structures relating to this client (doorbell, process descriptor, * write queue, etc). */ static void guc_init_ctx_desc(struct intel_guc *guc, struct i915_guc_client *client) { struct drm_i915_gem_object *client_obj = client->client_obj; struct drm_i915_private *dev_priv = guc_to_i915(guc); struct intel_engine_cs *engine; struct i915_gem_context *ctx = client->owner; struct guc_context_desc desc; struct sg_table *sg; u32 gfx_addr; memset(&desc, 0, sizeof(desc)); desc.attribute = GUC_CTX_DESC_ATTR_ACTIVE | GUC_CTX_DESC_ATTR_KERNEL; desc.context_id = client->ctx_index; desc.priority = client->priority; desc.db_id = client->doorbell_id; for_each_engine(engine, dev_priv) { struct intel_context *ce = &ctx->engine[engine->id]; struct guc_execlist_context *lrc = &desc.lrc[engine->guc_id]; struct drm_i915_gem_object *obj; /* TODO: We have a design issue to be solved here. Only when we * receive the first batch, we know which engine is used by the * user. But here GuC expects the lrc and ring to be pinned. It * is not an issue for default context, which is the only one * for now who owns a GuC client. But for future owner of GuC * client, need to make sure lrc is pinned prior to enter here. */ if (!ce->state) break; /* XXX: continue? */ lrc->context_desc = lower_32_bits(ce->lrc_desc); /* The state page is after PPHWSP */ gfx_addr = i915_gem_obj_ggtt_offset(ce->state); lrc->ring_lcra = gfx_addr + LRC_STATE_PN * PAGE_SIZE; lrc->context_id = (client->ctx_index << GUC_ELC_CTXID_OFFSET) | (engine->guc_id << GUC_ELC_ENGINE_OFFSET); obj = ce->ringbuf->obj; gfx_addr = i915_gem_obj_ggtt_offset(obj); lrc->ring_begin = gfx_addr; lrc->ring_end = gfx_addr + obj->base.size - 1; lrc->ring_next_free_location = gfx_addr; lrc->ring_current_tail_pointer_value = 0; desc.engines_used |= (1 << engine->guc_id); } WARN_ON(desc.engines_used == 0); /* * The doorbell, process descriptor, and workqueue are all parts * of the client object, which the GuC will reference via the GGTT */ gfx_addr = i915_gem_obj_ggtt_offset(client_obj); desc.db_trigger_phy = sg_dma_address(client_obj->pages->sgl) + client->doorbell_offset; desc.db_trigger_cpu = (uintptr_t)client->client_base + client->doorbell_offset; desc.db_trigger_uk = gfx_addr + client->doorbell_offset; desc.process_desc = gfx_addr + client->proc_desc_offset; desc.wq_addr = gfx_addr + client->wq_offset; desc.wq_size = client->wq_size; /* * XXX: Take LRCs from an existing context if this is not an * IsKMDCreatedContext client */ desc.desc_private = (uintptr_t)client; /* Pool context is pinned already */ sg = guc->ctx_pool_obj->pages; sg_pcopy_from_buffer(sg->sgl, sg->nents, &desc, sizeof(desc), sizeof(desc) * client->ctx_index); } static void guc_fini_ctx_desc(struct intel_guc *guc, struct i915_guc_client *client) { struct guc_context_desc desc; struct sg_table *sg; memset(&desc, 0, sizeof(desc)); sg = guc->ctx_pool_obj->pages; sg_pcopy_from_buffer(sg->sgl, sg->nents, &desc, sizeof(desc), sizeof(desc) * client->ctx_index); } /** * i915_guc_wq_check_space() - check that the GuC can accept a request * @request: request associated with the commands * * Return: 0 if space is available * -EAGAIN if space is not currently available * * This function must be called (and must return 0) before a request * is submitted to the GuC via i915_guc_submit() below. Once a result * of 0 has been returned, it remains valid until (but only until) * the next call to submit(). * * This precheck allows the caller to determine in advance that space * will be available for the next submission before committing resources * to it, and helps avoid late failures with complicated recovery paths. */ int i915_guc_wq_check_space(struct drm_i915_gem_request *request) { const size_t wqi_size = sizeof(struct guc_wq_item); struct i915_guc_client *gc = request->i915->guc.execbuf_client; struct guc_process_desc *desc; u32 freespace; GEM_BUG_ON(gc == NULL); desc = gc->client_base + gc->proc_desc_offset; freespace = CIRC_SPACE(gc->wq_tail, desc->head, gc->wq_size); if (likely(freespace >= wqi_size)) return 0; gc->no_wq_space += 1; return -EAGAIN; } static void guc_add_workqueue_item(struct i915_guc_client *gc, struct drm_i915_gem_request *rq) { /* wqi_len is in DWords, and does not include the one-word header */ const size_t wqi_size = sizeof(struct guc_wq_item); const u32 wqi_len = wqi_size/sizeof(u32) - 1; struct guc_process_desc *desc; struct guc_wq_item *wqi; void *base; u32 freespace, tail, wq_off, wq_page; desc = gc->client_base + gc->proc_desc_offset; /* Free space is guaranteed, see i915_guc_wq_check_space() above */ freespace = CIRC_SPACE(gc->wq_tail, desc->head, gc->wq_size); GEM_BUG_ON(freespace < wqi_size); /* The GuC firmware wants the tail index in QWords, not bytes */ tail = rq->tail; GEM_BUG_ON(tail & 7); tail >>= 3; GEM_BUG_ON(tail > WQ_RING_TAIL_MAX); /* For now workqueue item is 4 DWs; workqueue buffer is 2 pages. So we * should not have the case where structure wqi is across page, neither * wrapped to the beginning. This simplifies the implementation below. * * XXX: if not the case, we need save data to a temp wqi and copy it to * workqueue buffer dw by dw. */ BUILD_BUG_ON(wqi_size != 16); /* postincrement WQ tail for next time */ wq_off = gc->wq_tail; gc->wq_tail += wqi_size; gc->wq_tail &= gc->wq_size - 1; GEM_BUG_ON(wq_off & (wqi_size - 1)); /* WQ starts from the page after doorbell / process_desc */ wq_page = (wq_off + GUC_DB_SIZE) >> PAGE_SHIFT; wq_off &= PAGE_SIZE - 1; base = kmap_atomic(i915_gem_object_get_page(gc->client_obj, wq_page)); wqi = (struct guc_wq_item *)((char *)base + wq_off); /* Now fill in the 4-word work queue item */ wqi->header = WQ_TYPE_INORDER | (wqi_len << WQ_LEN_SHIFT) | (rq->engine->guc_id << WQ_TARGET_SHIFT) | WQ_NO_WCFLUSH_WAIT; /* The GuC wants only the low-order word of the context descriptor */ wqi->context_desc = (u32)intel_lr_context_descriptor(rq->ctx, rq->engine); wqi->ring_tail = tail << WQ_RING_TAIL_SHIFT; wqi->fence_id = rq->seqno; kunmap_atomic(base); } static int guc_ring_doorbell(struct i915_guc_client *gc) { struct guc_process_desc *desc; union guc_doorbell_qw db_cmp, db_exc, db_ret; union guc_doorbell_qw *db; int attempt = 2, ret = -EAGAIN; desc = gc->client_base + gc->proc_desc_offset; /* Update the tail so it is visible to GuC */ desc->tail = gc->wq_tail; /* current cookie */ db_cmp.db_status = GUC_DOORBELL_ENABLED; db_cmp.cookie = gc->cookie; /* cookie to be updated */ db_exc.db_status = GUC_DOORBELL_ENABLED; db_exc.cookie = gc->cookie + 1; if (db_exc.cookie == 0) db_exc.cookie = 1; /* pointer of current doorbell cacheline */ db = gc->client_base + gc->doorbell_offset; while (attempt--) { /* lets ring the doorbell */ db_ret.value_qw = atomic64_cmpxchg((atomic64_t *)db, db_cmp.value_qw, db_exc.value_qw); /* if the exchange was successfully executed */ if (db_ret.value_qw == db_cmp.value_qw) { /* db was successfully rung */ gc->cookie = db_exc.cookie; ret = 0; break; } /* XXX: doorbell was lost and need to acquire it again */ if (db_ret.db_status == GUC_DOORBELL_DISABLED) break; DRM_ERROR("Cookie mismatch. Expected %d, returned %d\n", db_cmp.cookie, db_ret.cookie); /* update the cookie to newly read cookie from GuC */ db_cmp.cookie = db_ret.cookie; db_exc.cookie = db_ret.cookie + 1; if (db_exc.cookie == 0) db_exc.cookie = 1; } return ret; } /** * i915_guc_submit() - Submit commands through GuC * @rq: request associated with the commands * * Return: 0 on success, otherwise an errno. * (Note: nonzero really shouldn't happen!) * * The caller must have already called i915_guc_wq_check_space() above * with a result of 0 (success) since the last request submission. This * guarantees that there is space in the work queue for the new request, * so enqueuing the item cannot fail. * * Bad Things Will Happen if the caller violates this protocol e.g. calls * submit() when check() says there's no space, or calls submit() multiple * times with no intervening check(). * * The only error here arises if the doorbell hardware isn't functioning * as expected, which really shouln't happen. */ int i915_guc_submit(struct drm_i915_gem_request *rq) { unsigned int engine_id = rq->engine->id; struct intel_guc *guc = &rq->i915->guc; struct i915_guc_client *client = guc->execbuf_client; int b_ret; guc_add_workqueue_item(client, rq); b_ret = guc_ring_doorbell(client); client->submissions[engine_id] += 1; client->retcode = b_ret; if (b_ret) client->b_fail += 1; guc->submissions[engine_id] += 1; guc->last_seqno[engine_id] = rq->seqno; return b_ret; } /* * Everything below here is concerned with setup & teardown, and is * therefore not part of the somewhat time-critical batch-submission * path of i915_guc_submit() above. */ /** * gem_allocate_guc_obj() - Allocate gem object for GuC usage * @dev_priv: driver private data structure * @size: size of object * * This is a wrapper to create a gem obj. In order to use it inside GuC, the * object needs to be pinned lifetime. Also we must pin it to gtt space other * than [0, GUC_WOPCM_TOP) because this range is reserved inside GuC. * * Return: A drm_i915_gem_object if successful, otherwise NULL. */ static struct drm_i915_gem_object * gem_allocate_guc_obj(struct drm_i915_private *dev_priv, u32 size) { struct drm_i915_gem_object *obj; obj = i915_gem_object_create(&dev_priv->drm, size); if (IS_ERR(obj)) return NULL; if (i915_gem_object_get_pages(obj)) { drm_gem_object_unreference(&obj->base); return NULL; } if (i915_gem_obj_ggtt_pin(obj, PAGE_SIZE, PIN_OFFSET_BIAS | GUC_WOPCM_TOP)) { drm_gem_object_unreference(&obj->base); return NULL; } /* Invalidate GuC TLB to let GuC take the latest updates to GTT. */ I915_WRITE(GEN8_GTCR, GEN8_GTCR_INVALIDATE); return obj; } /** * gem_release_guc_obj() - Release gem object allocated for GuC usage * @obj: gem obj to be released */ static void gem_release_guc_obj(struct drm_i915_gem_object *obj) { if (!obj) return; if (i915_gem_obj_is_pinned(obj)) i915_gem_object_ggtt_unpin(obj); drm_gem_object_unreference(&obj->base); } static void guc_client_free(struct drm_i915_private *dev_priv, struct i915_guc_client *client) { struct intel_guc *guc = &dev_priv->guc; if (!client) return; /* * XXX: wait for any outstanding submissions before freeing memory. * Be sure to drop any locks */ if (client->client_base) { /* * If we got as far as setting up a doorbell, make sure we * shut it down before unmapping & deallocating the memory. */ guc_disable_doorbell(guc, client); kunmap(kmap_to_page(client->client_base)); } gem_release_guc_obj(client->client_obj); if (client->ctx_index != GUC_INVALID_CTX_ID) { guc_fini_ctx_desc(guc, client); ida_simple_remove(&guc->ctx_ids, client->ctx_index); } kfree(client); } /* * Borrow the first client to set up & tear down every doorbell * in turn, to ensure that all doorbell h/w is (re)initialised. */ static void guc_init_doorbell_hw(struct intel_guc *guc) { struct drm_i915_private *dev_priv = guc_to_i915(guc); struct i915_guc_client *client = guc->execbuf_client; uint16_t db_id, i; int err; db_id = client->doorbell_id; for (i = 0; i < GUC_MAX_DOORBELLS; ++i) { i915_reg_t drbreg = GEN8_DRBREGL(i); u32 value = I915_READ(drbreg); err = guc_update_doorbell_id(guc, client, i); /* Report update failure or unexpectedly active doorbell */ if (err || (i != db_id && (value & GUC_DOORBELL_ENABLED))) DRM_DEBUG_DRIVER("Doorbell %d (reg 0x%x) was 0x%x, err %d\n", i, drbreg.reg, value, err); } /* Restore to original value */ err = guc_update_doorbell_id(guc, client, db_id); if (err) DRM_ERROR("Failed to restore doorbell to %d, err %d\n", db_id, err); for (i = 0; i < GUC_MAX_DOORBELLS; ++i) { i915_reg_t drbreg = GEN8_DRBREGL(i); u32 value = I915_READ(drbreg); if (i != db_id && (value & GUC_DOORBELL_ENABLED)) DRM_DEBUG_DRIVER("Doorbell %d (reg 0x%x) finally 0x%x\n", i, drbreg.reg, value); } } /** * guc_client_alloc() - Allocate an i915_guc_client * @dev_priv: driver private data structure * @priority: four levels priority _CRITICAL, _HIGH, _NORMAL and _LOW * The kernel client to replace ExecList submission is created with * NORMAL priority. Priority of a client for scheduler can be HIGH, * while a preemption context can use CRITICAL. * @ctx: the context that owns the client (we use the default render * context) * * Return: An i915_guc_client object if success, else NULL. */ static struct i915_guc_client * guc_client_alloc(struct drm_i915_private *dev_priv, uint32_t priority, struct i915_gem_context *ctx) { struct i915_guc_client *client; struct intel_guc *guc = &dev_priv->guc; struct drm_i915_gem_object *obj; uint16_t db_id; client = kzalloc(sizeof(*client), GFP_KERNEL); if (!client) return NULL; client->doorbell_id = GUC_INVALID_DOORBELL_ID; client->priority = priority; client->owner = ctx; client->guc = guc; client->ctx_index = (uint32_t)ida_simple_get(&guc->ctx_ids, 0, GUC_MAX_GPU_CONTEXTS, GFP_KERNEL); if (client->ctx_index >= GUC_MAX_GPU_CONTEXTS) { client->ctx_index = GUC_INVALID_CTX_ID; goto err; } /* The first page is doorbell/proc_desc. Two followed pages are wq. */ obj = gem_allocate_guc_obj(dev_priv, GUC_DB_SIZE + GUC_WQ_SIZE); if (!obj) goto err; /* We'll keep just the first (doorbell/proc) page permanently kmap'd. */ client->client_obj = obj; client->client_base = kmap(i915_gem_object_get_page(obj, 0)); client->wq_offset = GUC_DB_SIZE; client->wq_size = GUC_WQ_SIZE; db_id = select_doorbell_register(guc, client->priority); if (db_id == GUC_INVALID_DOORBELL_ID) /* XXX: evict a doorbell instead? */ goto err; client->doorbell_offset = select_doorbell_cacheline(guc); /* * Since the doorbell only requires a single cacheline, we can save * space by putting the application process descriptor in the same * page. Use the half of the page that doesn't include the doorbell. */ if (client->doorbell_offset >= (GUC_DB_SIZE / 2)) client->proc_desc_offset = 0; else client->proc_desc_offset = (GUC_DB_SIZE / 2); guc_init_proc_desc(guc, client); guc_init_ctx_desc(guc, client); if (guc_init_doorbell(guc, client, db_id)) goto err; DRM_DEBUG_DRIVER("new priority %u client %p: ctx_index %u\n", priority, client, client->ctx_index); DRM_DEBUG_DRIVER("doorbell id %u, cacheline offset 0x%x\n", client->doorbell_id, client->doorbell_offset); return client; err: DRM_ERROR("FAILED to create priority %u GuC client!\n", priority); guc_client_free(dev_priv, client); return NULL; } static void guc_create_log(struct intel_guc *guc) { struct drm_i915_private *dev_priv = guc_to_i915(guc); struct drm_i915_gem_object *obj; unsigned long offset; uint32_t size, flags; if (i915.guc_log_level < GUC_LOG_VERBOSITY_MIN) return; if (i915.guc_log_level > GUC_LOG_VERBOSITY_MAX) i915.guc_log_level = GUC_LOG_VERBOSITY_MAX; /* The first page is to save log buffer state. Allocate one * extra page for others in case for overlap */ size = (1 + GUC_LOG_DPC_PAGES + 1 + GUC_LOG_ISR_PAGES + 1 + GUC_LOG_CRASH_PAGES + 1) << PAGE_SHIFT; obj = guc->log_obj; if (!obj) { obj = gem_allocate_guc_obj(dev_priv, size); if (!obj) { /* logging will be off */ i915.guc_log_level = -1; return; } guc->log_obj = obj; } /* each allocated unit is a page */ flags = GUC_LOG_VALID | GUC_LOG_NOTIFY_ON_HALF_FULL | (GUC_LOG_DPC_PAGES << GUC_LOG_DPC_SHIFT) | (GUC_LOG_ISR_PAGES << GUC_LOG_ISR_SHIFT) | (GUC_LOG_CRASH_PAGES << GUC_LOG_CRASH_SHIFT); offset = i915_gem_obj_ggtt_offset(obj) >> PAGE_SHIFT; /* in pages */ guc->log_flags = (offset << GUC_LOG_BUF_ADDR_SHIFT) | flags; } static void init_guc_policies(struct guc_policies *policies) { struct guc_policy *policy; u32 p, i; policies->dpc_promote_time = 500000; policies->max_num_work_items = POLICY_MAX_NUM_WI; for (p = 0; p < GUC_CTX_PRIORITY_NUM; p++) { for (i = GUC_RENDER_ENGINE; i < GUC_MAX_ENGINES_NUM; i++) { policy = &policies->policy[p][i]; policy->execution_quantum = 1000000; policy->preemption_time = 500000; policy->fault_time = 250000; policy->policy_flags = 0; } } policies->is_valid = 1; } static void guc_create_ads(struct intel_guc *guc) { struct drm_i915_private *dev_priv = guc_to_i915(guc); struct drm_i915_gem_object *obj; struct guc_ads *ads; struct guc_policies *policies; struct guc_mmio_reg_state *reg_state; struct intel_engine_cs *engine; struct page *page; u32 size; /* The ads obj includes the struct itself and buffers passed to GuC */ size = sizeof(struct guc_ads) + sizeof(struct guc_policies) + sizeof(struct guc_mmio_reg_state) + GUC_S3_SAVE_SPACE_PAGES * PAGE_SIZE; obj = guc->ads_obj; if (!obj) { obj = gem_allocate_guc_obj(dev_priv, PAGE_ALIGN(size)); if (!obj) return; guc->ads_obj = obj; } page = i915_gem_object_get_page(obj, 0); ads = kmap(page); /* * The GuC requires a "Golden Context" when it reinitialises * engines after a reset. Here we use the Render ring default * context, which must already exist and be pinned in the GGTT, * so its address won't change after we've told the GuC where * to find it. */ engine = &dev_priv->engine[RCS]; ads->golden_context_lrca = engine->status_page.gfx_addr; for_each_engine(engine, dev_priv) ads->eng_state_size[engine->guc_id] = intel_lr_context_size(engine); /* GuC scheduling policies */ policies = (void *)ads + sizeof(struct guc_ads); init_guc_policies(policies); ads->scheduler_policies = i915_gem_obj_ggtt_offset(obj) + sizeof(struct guc_ads); /* MMIO reg state */ reg_state = (void *)policies + sizeof(struct guc_policies); for_each_engine(engine, dev_priv) { reg_state->mmio_white_list[engine->guc_id].mmio_start = engine->mmio_base + GUC_MMIO_WHITE_LIST_START; /* Nothing to be saved or restored for now. */ reg_state->mmio_white_list[engine->guc_id].count = 0; } ads->reg_state_addr = ads->scheduler_policies + sizeof(struct guc_policies); ads->reg_state_buffer = ads->reg_state_addr + sizeof(struct guc_mmio_reg_state); kunmap(page); } /* * Set up the memory resources to be shared with the GuC. At this point, * we require just one object that can be mapped through the GGTT. */ int i915_guc_submission_init(struct drm_i915_private *dev_priv) { const size_t ctxsize = sizeof(struct guc_context_desc); const size_t poolsize = GUC_MAX_GPU_CONTEXTS * ctxsize; const size_t gemsize = round_up(poolsize, PAGE_SIZE); struct intel_guc *guc = &dev_priv->guc; /* Wipe bitmap & delete client in case of reinitialisation */ bitmap_clear(guc->doorbell_bitmap, 0, GUC_MAX_DOORBELLS); i915_guc_submission_disable(dev_priv); if (!i915.enable_guc_submission) return 0; /* not enabled */ if (guc->ctx_pool_obj) return 0; /* already allocated */ guc->ctx_pool_obj = gem_allocate_guc_obj(dev_priv, gemsize); if (!guc->ctx_pool_obj) return -ENOMEM; ida_init(&guc->ctx_ids); guc_create_log(guc); guc_create_ads(guc); return 0; } int i915_guc_submission_enable(struct drm_i915_private *dev_priv) { struct intel_guc *guc = &dev_priv->guc; struct i915_guc_client *client; /* client for execbuf submission */ client = guc_client_alloc(dev_priv, GUC_CTX_PRIORITY_KMD_NORMAL, dev_priv->kernel_context); if (!client) { DRM_ERROR("Failed to create execbuf guc_client\n"); return -ENOMEM; } guc->execbuf_client = client; host2guc_sample_forcewake(guc, client); guc_init_doorbell_hw(guc); return 0; } void i915_guc_submission_disable(struct drm_i915_private *dev_priv) { struct intel_guc *guc = &dev_priv->guc; guc_client_free(dev_priv, guc->execbuf_client); guc->execbuf_client = NULL; } void i915_guc_submission_fini(struct drm_i915_private *dev_priv) { struct intel_guc *guc = &dev_priv->guc; gem_release_guc_obj(dev_priv->guc.ads_obj); guc->ads_obj = NULL; gem_release_guc_obj(dev_priv->guc.log_obj); guc->log_obj = NULL; if (guc->ctx_pool_obj) ida_destroy(&guc->ctx_ids); gem_release_guc_obj(guc->ctx_pool_obj); guc->ctx_pool_obj = NULL; } /** * intel_guc_suspend() - notify GuC entering suspend state * @dev: drm device */ int intel_guc_suspend(struct drm_device *dev) { struct drm_i915_private *dev_priv = to_i915(dev); struct intel_guc *guc = &dev_priv->guc; struct i915_gem_context *ctx; u32 data[3]; if (guc->guc_fw.guc_fw_load_status != GUC_FIRMWARE_SUCCESS) return 0; ctx = dev_priv->kernel_context; data[0] = HOST2GUC_ACTION_ENTER_S_STATE; /* any value greater than GUC_POWER_D0 */ data[1] = GUC_POWER_D1; /* first page is shared data with GuC */ data[2] = i915_gem_obj_ggtt_offset(ctx->engine[RCS].state); return host2guc_action(guc, data, ARRAY_SIZE(data)); } /** * intel_guc_resume() - notify GuC resuming from suspend state * @dev: drm device */ int intel_guc_resume(struct drm_device *dev) { struct drm_i915_private *dev_priv = to_i915(dev); struct intel_guc *guc = &dev_priv->guc; struct i915_gem_context *ctx; u32 data[3]; if (guc->guc_fw.guc_fw_load_status != GUC_FIRMWARE_SUCCESS) return 0; ctx = dev_priv->kernel_context; data[0] = HOST2GUC_ACTION_EXIT_S_STATE; data[1] = GUC_POWER_D0; /* first page is shared data with GuC */ data[2] = i915_gem_obj_ggtt_offset(ctx->engine[RCS].state); return host2guc_action(guc, data, ARRAY_SIZE(data)); }