/* * ACPI support for Intel Lynxpoint LPSS. * * Copyright (C) 2013, Intel Corporation * Authors: Mika Westerberg * Rafael J. Wysocki * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include "internal.h" ACPI_MODULE_NAME("acpi_lpss"); #ifdef CONFIG_X86_INTEL_LPSS #include #include #include #define LPSS_ADDR(desc) ((unsigned long)&desc) #define LPSS_CLK_SIZE 0x04 #define LPSS_LTR_SIZE 0x18 /* Offsets relative to LPSS_PRIVATE_OFFSET */ #define LPSS_CLK_DIVIDER_DEF_MASK (BIT(1) | BIT(16)) #define LPSS_RESETS 0x04 #define LPSS_RESETS_RESET_FUNC BIT(0) #define LPSS_RESETS_RESET_APB BIT(1) #define LPSS_GENERAL 0x08 #define LPSS_GENERAL_LTR_MODE_SW BIT(2) #define LPSS_GENERAL_UART_RTS_OVRD BIT(3) #define LPSS_SW_LTR 0x10 #define LPSS_AUTO_LTR 0x14 #define LPSS_LTR_SNOOP_REQ BIT(15) #define LPSS_LTR_SNOOP_MASK 0x0000FFFF #define LPSS_LTR_SNOOP_LAT_1US 0x800 #define LPSS_LTR_SNOOP_LAT_32US 0xC00 #define LPSS_LTR_SNOOP_LAT_SHIFT 5 #define LPSS_LTR_SNOOP_LAT_CUTOFF 3000 #define LPSS_LTR_MAX_VAL 0x3FF #define LPSS_TX_INT 0x20 #define LPSS_TX_INT_MASK BIT(1) #define LPSS_PRV_REG_COUNT 9 /* LPSS Flags */ #define LPSS_CLK BIT(0) #define LPSS_CLK_GATE BIT(1) #define LPSS_CLK_DIVIDER BIT(2) #define LPSS_LTR BIT(3) #define LPSS_SAVE_CTX BIT(4) #define LPSS_NO_D3_DELAY BIT(5) /* Crystal Cove PMIC shares same ACPI ID between different platforms */ #define BYT_CRC_HRV 2 #define CHT_CRC_HRV 3 struct lpss_private_data; struct lpss_device_desc { unsigned int flags; const char *clk_con_id; unsigned int prv_offset; size_t prv_size_override; struct property_entry *properties; void (*setup)(struct lpss_private_data *pdata); }; static const struct lpss_device_desc lpss_dma_desc = { .flags = LPSS_CLK, }; struct lpss_private_data { struct acpi_device *adev; void __iomem *mmio_base; resource_size_t mmio_size; unsigned int fixed_clk_rate; struct clk *clk; const struct lpss_device_desc *dev_desc; u32 prv_reg_ctx[LPSS_PRV_REG_COUNT]; }; /* LPSS run time quirks */ static unsigned int lpss_quirks; /* * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device. * * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover * it can be powered off automatically whenever the last LPSS device goes down. * In case of no power any access to the DMA controller will hang the system. * The behaviour is reproduced on some HP laptops based on Intel BayTrail as * well as on ASuS T100TA transformer. * * This quirk overrides power state of entire LPSS island to keep DMA powered * on whenever we have at least one other device in use. */ #define LPSS_QUIRK_ALWAYS_POWER_ON BIT(0) /* UART Component Parameter Register */ #define LPSS_UART_CPR 0xF4 #define LPSS_UART_CPR_AFCE BIT(4) static void lpss_uart_setup(struct lpss_private_data *pdata) { unsigned int offset; u32 val; offset = pdata->dev_desc->prv_offset + LPSS_TX_INT; val = readl(pdata->mmio_base + offset); writel(val | LPSS_TX_INT_MASK, pdata->mmio_base + offset); val = readl(pdata->mmio_base + LPSS_UART_CPR); if (!(val & LPSS_UART_CPR_AFCE)) { offset = pdata->dev_desc->prv_offset + LPSS_GENERAL; val = readl(pdata->mmio_base + offset); val |= LPSS_GENERAL_UART_RTS_OVRD; writel(val, pdata->mmio_base + offset); } } static void lpss_deassert_reset(struct lpss_private_data *pdata) { unsigned int offset; u32 val; offset = pdata->dev_desc->prv_offset + LPSS_RESETS; val = readl(pdata->mmio_base + offset); val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC; writel(val, pdata->mmio_base + offset); } /* * BYT PWM used for backlight control by the i915 driver on systems without * the Crystal Cove PMIC. */ static struct pwm_lookup byt_pwm_lookup[] = { PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0", "pwm_backlight", 0, PWM_POLARITY_NORMAL, "pwm-lpss-platform"), }; static void byt_pwm_setup(struct lpss_private_data *pdata) { struct acpi_device *adev = pdata->adev; /* Only call pwm_add_table for the first PWM controller */ if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1")) return; if (!acpi_dev_present("INT33FD", NULL, BYT_CRC_HRV)) pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup)); } #define LPSS_I2C_ENABLE 0x6c static void byt_i2c_setup(struct lpss_private_data *pdata) { lpss_deassert_reset(pdata); if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset)) pdata->fixed_clk_rate = 133000000; writel(0, pdata->mmio_base + LPSS_I2C_ENABLE); } /* BSW PWM used for backlight control by the i915 driver */ static struct pwm_lookup bsw_pwm_lookup[] = { PWM_LOOKUP_WITH_MODULE("80862288:00", 0, "0000:00:02.0", "pwm_backlight", 0, PWM_POLARITY_NORMAL, "pwm-lpss-platform"), }; static void bsw_pwm_setup(struct lpss_private_data *pdata) { struct acpi_device *adev = pdata->adev; /* Only call pwm_add_table for the first PWM controller */ if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1")) return; pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup)); } static const struct lpss_device_desc lpt_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR, .prv_offset = 0x800, }; static const struct lpss_device_desc lpt_i2c_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR, .prv_offset = 0x800, }; static struct property_entry uart_properties[] = { PROPERTY_ENTRY_U32("reg-io-width", 4), PROPERTY_ENTRY_U32("reg-shift", 2), PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"), { }, }; static const struct lpss_device_desc lpt_uart_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR, .clk_con_id = "baudclk", .prv_offset = 0x800, .setup = lpss_uart_setup, .properties = uart_properties, }; static const struct lpss_device_desc lpt_sdio_dev_desc = { .flags = LPSS_LTR, .prv_offset = 0x1000, .prv_size_override = 0x1018, }; static const struct lpss_device_desc byt_pwm_dev_desc = { .flags = LPSS_SAVE_CTX, .prv_offset = 0x800, .setup = byt_pwm_setup, }; static const struct lpss_device_desc bsw_pwm_dev_desc = { .flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY, .prv_offset = 0x800, .setup = bsw_pwm_setup, }; static const struct lpss_device_desc byt_uart_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX, .clk_con_id = "baudclk", .prv_offset = 0x800, .setup = lpss_uart_setup, .properties = uart_properties, }; static const struct lpss_device_desc bsw_uart_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY, .clk_con_id = "baudclk", .prv_offset = 0x800, .setup = lpss_uart_setup, .properties = uart_properties, }; static const struct lpss_device_desc byt_spi_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX, .prv_offset = 0x400, }; static const struct lpss_device_desc byt_sdio_dev_desc = { .flags = LPSS_CLK, }; static const struct lpss_device_desc byt_i2c_dev_desc = { .flags = LPSS_CLK | LPSS_SAVE_CTX, .prv_offset = 0x800, .setup = byt_i2c_setup, }; static const struct lpss_device_desc bsw_i2c_dev_desc = { .flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY, .prv_offset = 0x800, .setup = byt_i2c_setup, }; static const struct lpss_device_desc bsw_spi_dev_desc = { .flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY, .prv_offset = 0x400, .setup = lpss_deassert_reset, }; #define ICPU(model) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, } static const struct x86_cpu_id lpss_cpu_ids[] = { ICPU(INTEL_FAM6_ATOM_SILVERMONT1), /* Valleyview, Bay Trail */ ICPU(INTEL_FAM6_ATOM_AIRMONT), /* Braswell, Cherry Trail */ {} }; #else #define LPSS_ADDR(desc) (0UL) #endif /* CONFIG_X86_INTEL_LPSS */ static const struct acpi_device_id acpi_lpss_device_ids[] = { /* Generic LPSS devices */ { "INTL9C60", LPSS_ADDR(lpss_dma_desc) }, /* Lynxpoint LPSS devices */ { "INT33C0", LPSS_ADDR(lpt_dev_desc) }, { "INT33C1", LPSS_ADDR(lpt_dev_desc) }, { "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) }, { "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) }, { "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) }, { "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) }, { "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) }, { "INT33C7", }, /* BayTrail LPSS devices */ { "80860F09", LPSS_ADDR(byt_pwm_dev_desc) }, { "80860F0A", LPSS_ADDR(byt_uart_dev_desc) }, { "80860F0E", LPSS_ADDR(byt_spi_dev_desc) }, { "80860F14", LPSS_ADDR(byt_sdio_dev_desc) }, { "80860F41", LPSS_ADDR(byt_i2c_dev_desc) }, { "INT33B2", }, { "INT33FC", }, /* Braswell LPSS devices */ { "80862286", LPSS_ADDR(lpss_dma_desc) }, { "80862288", LPSS_ADDR(bsw_pwm_dev_desc) }, { "8086228A", LPSS_ADDR(bsw_uart_dev_desc) }, { "8086228E", LPSS_ADDR(bsw_spi_dev_desc) }, { "808622C0", LPSS_ADDR(lpss_dma_desc) }, { "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) }, /* Broadwell LPSS devices */ { "INT3430", LPSS_ADDR(lpt_dev_desc) }, { "INT3431", LPSS_ADDR(lpt_dev_desc) }, { "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) }, { "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) }, { "INT3434", LPSS_ADDR(lpt_uart_dev_desc) }, { "INT3435", LPSS_ADDR(lpt_uart_dev_desc) }, { "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) }, { "INT3437", }, /* Wildcat Point LPSS devices */ { "INT3438", LPSS_ADDR(lpt_dev_desc) }, { } }; #ifdef CONFIG_X86_INTEL_LPSS static int is_memory(struct acpi_resource *res, void *not_used) { struct resource r; return !acpi_dev_resource_memory(res, &r); } /* LPSS main clock device. */ static struct platform_device *lpss_clk_dev; static inline void lpt_register_clock_device(void) { lpss_clk_dev = platform_device_register_simple("clk-lpt", -1, NULL, 0); } static int register_device_clock(struct acpi_device *adev, struct lpss_private_data *pdata) { const struct lpss_device_desc *dev_desc = pdata->dev_desc; const char *devname = dev_name(&adev->dev); struct clk *clk = ERR_PTR(-ENODEV); struct lpss_clk_data *clk_data; const char *parent, *clk_name; void __iomem *prv_base; if (!lpss_clk_dev) lpt_register_clock_device(); clk_data = platform_get_drvdata(lpss_clk_dev); if (!clk_data) return -ENODEV; clk = clk_data->clk; if (!pdata->mmio_base || pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE) return -ENODATA; parent = clk_data->name; prv_base = pdata->mmio_base + dev_desc->prv_offset; if (pdata->fixed_clk_rate) { clk = clk_register_fixed_rate(NULL, devname, parent, 0, pdata->fixed_clk_rate); goto out; } if (dev_desc->flags & LPSS_CLK_GATE) { clk = clk_register_gate(NULL, devname, parent, 0, prv_base, 0, 0, NULL); parent = devname; } if (dev_desc->flags & LPSS_CLK_DIVIDER) { /* Prevent division by zero */ if (!readl(prv_base)) writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base); clk_name = kasprintf(GFP_KERNEL, "%s-div", devname); if (!clk_name) return -ENOMEM; clk = clk_register_fractional_divider(NULL, clk_name, parent, 0, prv_base, 1, 15, 16, 15, 0, NULL); parent = clk_name; clk_name = kasprintf(GFP_KERNEL, "%s-update", devname); if (!clk_name) { kfree(parent); return -ENOMEM; } clk = clk_register_gate(NULL, clk_name, parent, CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE, prv_base, 31, 0, NULL); kfree(parent); kfree(clk_name); } out: if (IS_ERR(clk)) return PTR_ERR(clk); pdata->clk = clk; clk_register_clkdev(clk, dev_desc->clk_con_id, devname); return 0; } static int acpi_lpss_create_device(struct acpi_device *adev, const struct acpi_device_id *id) { const struct lpss_device_desc *dev_desc; struct lpss_private_data *pdata; struct resource_entry *rentry; struct list_head resource_list; struct platform_device *pdev; int ret; dev_desc = (const struct lpss_device_desc *)id->driver_data; if (!dev_desc) { pdev = acpi_create_platform_device(adev, NULL); return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1; } pdata = kzalloc(sizeof(*pdata), GFP_KERNEL); if (!pdata) return -ENOMEM; INIT_LIST_HEAD(&resource_list); ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL); if (ret < 0) goto err_out; list_for_each_entry(rentry, &resource_list, node) if (resource_type(rentry->res) == IORESOURCE_MEM) { if (dev_desc->prv_size_override) pdata->mmio_size = dev_desc->prv_size_override; else pdata->mmio_size = resource_size(rentry->res); pdata->mmio_base = ioremap(rentry->res->start, pdata->mmio_size); break; } acpi_dev_free_resource_list(&resource_list); if (!pdata->mmio_base) { /* Avoid acpi_bus_attach() instantiating a pdev for this dev. */ adev->pnp.type.platform_id = 0; /* Skip the device, but continue the namespace scan. */ ret = 0; goto err_out; } pdata->adev = adev; pdata->dev_desc = dev_desc; if (dev_desc->setup) dev_desc->setup(pdata); if (dev_desc->flags & LPSS_CLK) { ret = register_device_clock(adev, pdata); if (ret) { /* Skip the device, but continue the namespace scan. */ ret = 0; goto err_out; } } /* * This works around a known issue in ACPI tables where LPSS devices * have _PS0 and _PS3 without _PSC (and no power resources), so * acpi_bus_init_power() will assume that the BIOS has put them into D0. */ ret = acpi_device_fix_up_power(adev); if (ret) { /* Skip the device, but continue the namespace scan. */ ret = 0; goto err_out; } adev->driver_data = pdata; pdev = acpi_create_platform_device(adev, dev_desc->properties); if (!IS_ERR_OR_NULL(pdev)) { return 1; } ret = PTR_ERR(pdev); adev->driver_data = NULL; err_out: kfree(pdata); return ret; } static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg) { return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg); } static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata, unsigned int reg) { writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg); } static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val) { struct acpi_device *adev; struct lpss_private_data *pdata; unsigned long flags; int ret; ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev); if (WARN_ON(ret)) return ret; spin_lock_irqsave(&dev->power.lock, flags); if (pm_runtime_suspended(dev)) { ret = -EAGAIN; goto out; } pdata = acpi_driver_data(adev); if (WARN_ON(!pdata || !pdata->mmio_base)) { ret = -ENODEV; goto out; } *val = __lpss_reg_read(pdata, reg); out: spin_unlock_irqrestore(&dev->power.lock, flags); return ret; } static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr, char *buf) { u32 ltr_value = 0; unsigned int reg; int ret; reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR; ret = lpss_reg_read(dev, reg, <r_value); if (ret) return ret; return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value); } static ssize_t lpss_ltr_mode_show(struct device *dev, struct device_attribute *attr, char *buf) { u32 ltr_mode = 0; char *outstr; int ret; ret = lpss_reg_read(dev, LPSS_GENERAL, <r_mode); if (ret) return ret; outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto"; return sprintf(buf, "%s\n", outstr); } static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL); static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL); static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL); static struct attribute *lpss_attrs[] = { &dev_attr_auto_ltr.attr, &dev_attr_sw_ltr.attr, &dev_attr_ltr_mode.attr, NULL, }; static const struct attribute_group lpss_attr_group = { .attrs = lpss_attrs, .name = "lpss_ltr", }; static void acpi_lpss_set_ltr(struct device *dev, s32 val) { struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); u32 ltr_mode, ltr_val; ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL); if (val < 0) { if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) { ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW; __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL); } return; } ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK; if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) { ltr_val |= LPSS_LTR_SNOOP_LAT_32US; val = LPSS_LTR_MAX_VAL; } else if (val > LPSS_LTR_MAX_VAL) { ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ; val >>= LPSS_LTR_SNOOP_LAT_SHIFT; } else { ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ; } ltr_val |= val; __lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR); if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) { ltr_mode |= LPSS_GENERAL_LTR_MODE_SW; __lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL); } } #ifdef CONFIG_PM /** * acpi_lpss_save_ctx() - Save the private registers of LPSS device * @dev: LPSS device * @pdata: pointer to the private data of the LPSS device * * Most LPSS devices have private registers which may loose their context when * the device is powered down. acpi_lpss_save_ctx() saves those registers into * prv_reg_ctx array. */ static void acpi_lpss_save_ctx(struct device *dev, struct lpss_private_data *pdata) { unsigned int i; for (i = 0; i < LPSS_PRV_REG_COUNT; i++) { unsigned long offset = i * sizeof(u32); pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset); dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n", pdata->prv_reg_ctx[i], offset); } } /** * acpi_lpss_restore_ctx() - Restore the private registers of LPSS device * @dev: LPSS device * @pdata: pointer to the private data of the LPSS device * * Restores the registers that were previously stored with acpi_lpss_save_ctx(). */ static void acpi_lpss_restore_ctx(struct device *dev, struct lpss_private_data *pdata) { unsigned int i; for (i = 0; i < LPSS_PRV_REG_COUNT; i++) { unsigned long offset = i * sizeof(u32); __lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset); dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n", pdata->prv_reg_ctx[i], offset); } } static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata) { /* * The following delay is needed or the subsequent write operations may * fail. The LPSS devices are actually PCI devices and the PCI spec * expects 10ms delay before the device can be accessed after D3 to D0 * transition. However some platforms like BSW does not need this delay. */ unsigned int delay = 10; /* default 10ms delay */ if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY) delay = 0; msleep(delay); } static int acpi_lpss_activate(struct device *dev) { struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); int ret; ret = acpi_dev_runtime_resume(dev); if (ret) return ret; acpi_lpss_d3_to_d0_delay(pdata); /* * This is called only on ->probe() stage where a device is either in * known state defined by BIOS or most likely powered off. Due to this * we have to deassert reset line to be sure that ->probe() will * recognize the device. */ if (pdata->dev_desc->flags & LPSS_SAVE_CTX) lpss_deassert_reset(pdata); return 0; } static void acpi_lpss_dismiss(struct device *dev) { acpi_dev_runtime_suspend(dev); } #ifdef CONFIG_PM_SLEEP static int acpi_lpss_suspend_late(struct device *dev) { struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); int ret; ret = pm_generic_suspend_late(dev); if (ret) return ret; if (pdata->dev_desc->flags & LPSS_SAVE_CTX) acpi_lpss_save_ctx(dev, pdata); return acpi_dev_suspend_late(dev); } static int acpi_lpss_resume_early(struct device *dev) { struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); int ret; ret = acpi_dev_resume_early(dev); if (ret) return ret; acpi_lpss_d3_to_d0_delay(pdata); if (pdata->dev_desc->flags & LPSS_SAVE_CTX) acpi_lpss_restore_ctx(dev, pdata); return pm_generic_resume_early(dev); } #endif /* CONFIG_PM_SLEEP */ /* IOSF SB for LPSS island */ #define LPSS_IOSF_UNIT_LPIOEP 0xA0 #define LPSS_IOSF_UNIT_LPIO1 0xAB #define LPSS_IOSF_UNIT_LPIO2 0xAC #define LPSS_IOSF_PMCSR 0x84 #define LPSS_PMCSR_D0 0 #define LPSS_PMCSR_D3hot 3 #define LPSS_PMCSR_Dx_MASK GENMASK(1, 0) #define LPSS_IOSF_GPIODEF0 0x154 #define LPSS_GPIODEF0_DMA1_D3 BIT(2) #define LPSS_GPIODEF0_DMA2_D3 BIT(3) #define LPSS_GPIODEF0_DMA_D3_MASK GENMASK(3, 2) #define LPSS_GPIODEF0_DMA_LLP BIT(13) static DEFINE_MUTEX(lpss_iosf_mutex); static void lpss_iosf_enter_d3_state(void) { u32 value1 = 0; u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP; u32 value2 = LPSS_PMCSR_D3hot; u32 mask2 = LPSS_PMCSR_Dx_MASK; /* * PMC provides an information about actual status of the LPSS devices. * Here we read the values related to LPSS power island, i.e. LPSS * devices, excluding both LPSS DMA controllers, along with SCC domain. */ u32 func_dis, d3_sts_0, pmc_status, pmc_mask = 0xfe000ffe; int ret; ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis); if (ret) return; mutex_lock(&lpss_iosf_mutex); ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0); if (ret) goto exit; /* * Get the status of entire LPSS power island per device basis. * Shutdown both LPSS DMA controllers if and only if all other devices * are already in D3hot. */ pmc_status = (~(d3_sts_0 | func_dis)) & pmc_mask; if (pmc_status) goto exit; iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE, LPSS_IOSF_PMCSR, value2, mask2); iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE, LPSS_IOSF_PMCSR, value2, mask2); iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE, LPSS_IOSF_GPIODEF0, value1, mask1); exit: mutex_unlock(&lpss_iosf_mutex); } static void lpss_iosf_exit_d3_state(void) { u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3 | LPSS_GPIODEF0_DMA_LLP; u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP; u32 value2 = LPSS_PMCSR_D0; u32 mask2 = LPSS_PMCSR_Dx_MASK; mutex_lock(&lpss_iosf_mutex); iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE, LPSS_IOSF_GPIODEF0, value1, mask1); iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE, LPSS_IOSF_PMCSR, value2, mask2); iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE, LPSS_IOSF_PMCSR, value2, mask2); mutex_unlock(&lpss_iosf_mutex); } static int acpi_lpss_runtime_suspend(struct device *dev) { struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); int ret; ret = pm_generic_runtime_suspend(dev); if (ret) return ret; if (pdata->dev_desc->flags & LPSS_SAVE_CTX) acpi_lpss_save_ctx(dev, pdata); ret = acpi_dev_runtime_suspend(dev); /* * This call must be last in the sequence, otherwise PMC will return * wrong status for devices being about to be powered off. See * lpss_iosf_enter_d3_state() for further information. */ if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available()) lpss_iosf_enter_d3_state(); return ret; } static int acpi_lpss_runtime_resume(struct device *dev) { struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); int ret; /* * This call is kept first to be in symmetry with * acpi_lpss_runtime_suspend() one. */ if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available()) lpss_iosf_exit_d3_state(); ret = acpi_dev_runtime_resume(dev); if (ret) return ret; acpi_lpss_d3_to_d0_delay(pdata); if (pdata->dev_desc->flags & LPSS_SAVE_CTX) acpi_lpss_restore_ctx(dev, pdata); return pm_generic_runtime_resume(dev); } #endif /* CONFIG_PM */ static struct dev_pm_domain acpi_lpss_pm_domain = { #ifdef CONFIG_PM .activate = acpi_lpss_activate, .dismiss = acpi_lpss_dismiss, #endif .ops = { #ifdef CONFIG_PM #ifdef CONFIG_PM_SLEEP .prepare = acpi_subsys_prepare, .complete = pm_complete_with_resume_check, .suspend = acpi_subsys_suspend, .suspend_late = acpi_lpss_suspend_late, .resume_early = acpi_lpss_resume_early, .freeze = acpi_subsys_freeze, .poweroff = acpi_subsys_suspend, .poweroff_late = acpi_lpss_suspend_late, .restore_early = acpi_lpss_resume_early, #endif .runtime_suspend = acpi_lpss_runtime_suspend, .runtime_resume = acpi_lpss_runtime_resume, #endif }, }; static int acpi_lpss_platform_notify(struct notifier_block *nb, unsigned long action, void *data) { struct platform_device *pdev = to_platform_device(data); struct lpss_private_data *pdata; struct acpi_device *adev; const struct acpi_device_id *id; id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev); if (!id || !id->driver_data) return 0; if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev)) return 0; pdata = acpi_driver_data(adev); if (!pdata) return 0; if (pdata->mmio_base && pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) { dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n"); return 0; } switch (action) { case BUS_NOTIFY_BIND_DRIVER: dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain); break; case BUS_NOTIFY_DRIVER_NOT_BOUND: case BUS_NOTIFY_UNBOUND_DRIVER: dev_pm_domain_set(&pdev->dev, NULL); break; case BUS_NOTIFY_ADD_DEVICE: dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain); if (pdata->dev_desc->flags & LPSS_LTR) return sysfs_create_group(&pdev->dev.kobj, &lpss_attr_group); break; case BUS_NOTIFY_DEL_DEVICE: if (pdata->dev_desc->flags & LPSS_LTR) sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group); dev_pm_domain_set(&pdev->dev, NULL); break; default: break; } return 0; } static struct notifier_block acpi_lpss_nb = { .notifier_call = acpi_lpss_platform_notify, }; static void acpi_lpss_bind(struct device *dev) { struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev)); if (!pdata || !pdata->mmio_base || !(pdata->dev_desc->flags & LPSS_LTR)) return; if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) dev->power.set_latency_tolerance = acpi_lpss_set_ltr; else dev_err(dev, "MMIO size insufficient to access LTR\n"); } static void acpi_lpss_unbind(struct device *dev) { dev->power.set_latency_tolerance = NULL; } static struct acpi_scan_handler lpss_handler = { .ids = acpi_lpss_device_ids, .attach = acpi_lpss_create_device, .bind = acpi_lpss_bind, .unbind = acpi_lpss_unbind, }; void __init acpi_lpss_init(void) { const struct x86_cpu_id *id; int ret; ret = lpt_clk_init(); if (ret) return; id = x86_match_cpu(lpss_cpu_ids); if (id) lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON; bus_register_notifier(&platform_bus_type, &acpi_lpss_nb); acpi_scan_add_handler(&lpss_handler); } #else static struct acpi_scan_handler lpss_handler = { .ids = acpi_lpss_device_ids, }; void __init acpi_lpss_init(void) { acpi_scan_add_handler(&lpss_handler); } #endif /* CONFIG_X86_INTEL_LPSS */