summaryrefslogtreecommitdiffstats
path: root/tools
AgeCommit message (Collapse)Author
2021-06-10selftests/bpf: make 'dubious pointer arithmetic' test usefulAlexei Starovoitov
commit 31e95b61e172144bb2b626a291db1bdc0769275b upstream. mostly revert the previous workaround and make 'dubious pointer arithmetic' test useful again. Use (ptr - ptr) << const instead of ptr << const to generate large scalar. The rest stays as before commit 2b36047e7889. Fixes: 2b36047e7889 ("selftests/bpf: fix test_align") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> [fllinden@amazon.com: adjust for 4.14 (no liveness of regs in output)] Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10selftests/bpf: fix test_alignAlexei Starovoitov
commit 2b36047e7889b7efee22c11e17f035f721855731 upstream. since commit 82abbf8d2fc4 the verifier rejects the bit-wise arithmetic on pointers earlier. The test 'dubious pointer arithmetic' now has less output to match on. Adjust it. Fixes: 82abbf8d2fc4 ("bpf: do not allow root to mangle valid pointers") Reported-by: kernel test robot <xiaolong.ye@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10bpf: do not allow root to mangle valid pointersAlexei Starovoitov
commit 82abbf8d2fc46d79611ab58daa7c608df14bb3ee upstream. Do not allow root to convert valid pointers into unknown scalars. In particular disallow: ptr &= reg ptr <<= reg ptr += ptr and explicitly allow: ptr -= ptr since pkt_end - pkt == length 1. This minimizes amount of address leaks root can do. In the future may need to further tighten the leaks with kptr_restrict. 2. If program has such pointer math it's likely a user mistake and when verifier complains about it right away instead of many instructions later on invalid memory access it's easier for users to fix their progs. 3. when register holding a pointer cannot change to scalar it allows JITs to optimize better. Like 32-bit archs could use single register for pointers instead of a pair required to hold 64-bit scalars. 4. reduces architecture dependent behavior. Since code: r1 = r10; r1 &= 0xff; if (r1 ...) will behave differently arm64 vs x64 and offloaded vs native. A significant chunk of ptr mangling was allowed by commit f1174f77b50c ("bpf/verifier: rework value tracking") yet some of it was allowed even earlier. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> [fllinden@amazon.com: backport to 4.14] Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10bpf: Update selftests to reflect new error statesDaniel Borkmann
commit d7a5091351756d0ae8e63134313c455624e36a13 upstream. Update various selftest error messages: * The 'Rx tried to sub from different maps, paths, or prohibited types' is reworked into more specific/differentiated error messages for better guidance. * The change into 'value -4294967168 makes map_value pointer be out of bounds' is due to moving the mixed bounds check into the speculation handling and thus occuring slightly later than above mentioned sanity check. * The change into 'math between map_value pointer and register with unbounded min value' is similarly due to register sanity check coming before the mixed bounds check. * The case of 'map access: known scalar += value_ptr from different maps' now loads fine given masks are the same from the different paths (despite max map value size being different). Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org> [fllinden@amazon.com - 4.14 backport, account for split test_verifier and different / missing tests] Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10bpf, selftests: Fix up some test_verifier cases for unprivilegedPiotr Krysiuk
commit 0a13e3537ea67452d549a6a80da3776d6b7dedb3 upstream. Fix up test_verifier error messages for the case where the original error message changed, or for the case where pointer alu errors differ between privileged and unprivileged tests. Also, add alternative tests for keeping coverage of the original verifier rejection error message (fp alu), and newly reject map_ptr += rX where rX == 0 given we now forbid alu on these types for unprivileged. All test_verifier cases pass after the change. The test case fixups were kept separate to ease backporting of core changes. Signed-off-by: Piotr Krysiuk <piotras@gmail.com> Co-developed-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> [fllinden@amazon.com: backport to 4.14, skipping non-existent tests] Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03perf jevents: Fix getting maximum number of fdsFelix Fietkau
commit 75ea44e356b5de8c817f821c9dd68ae329e82add upstream. On some hosts, rlim.rlim_max can be returned as RLIM_INFINITY. By casting it to int, it is interpreted as -1, which will cause get_maxfds to return 0, causing "Invalid argument" errors in nftw() calls. Fix this by casting the second argument of min() to rlim_t instead. Fixes: 80eeb67fe577 ("perf jevents: Program to convert JSON file") Signed-off-by: Felix Fietkau <nbd@nbd.name> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lore.kernel.org/lkml/20210525160758.97829-1-nbd@nbd.name Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03perf intel-pt: Fix transaction abort handlingAdrian Hunter
commit cb7987837c31b217b28089bbc78922d5c9187869 upstream. When adding support for power events, some handling of FUP packets was unified. That resulted in breaking reporting of TSX aborts, by not considering the associated TIP packet. Fix that. Example: A machine that supports TSX is required. It will have flag "rtm". Kernel parameter tsx=on may be required. # for w in `cat /proc/cpuinfo | grep -m1 flags `;do echo $w | grep rtm ; done rtm Test program: #include <stdio.h> #include <immintrin.h> int main() { int x = 0; if (_xbegin() == _XBEGIN_STARTED) { x = 1; _xabort(1); } else { printf("x = %d\n", x); } return 0; } Compile with -mrtm i.e. gcc -Wall -Wextra -mrtm xabort.c -o xabort Record: perf record -e intel_pt/cyc/u --filter 'filter main @ ./xabort' ./xabort Before: # perf script --itrace=be -F+flags,+addr,-period,-event --ns xabort 1478 [007] 92161.431348552: tr strt 0 [unknown] ([unknown]) => 400b6d main+0x0 (/root/xabort) xabort 1478 [007] 92161.431348624: jmp 400b96 main+0x29 (/root/xabort) => 400bae main+0x41 (/root/xabort) xabort 1478 [007] 92161.431348624: return 400bb4 main+0x47 (/root/xabort) => 400b87 main+0x1a (/root/xabort) xabort 1478 [007] 92161.431348637: jcc 400b8a main+0x1d (/root/xabort) => 400b98 main+0x2b (/root/xabort) xabort 1478 [007] 92161.431348644: tr end call 400ba9 main+0x3c (/root/xabort) => 40f690 printf+0x0 (/root/xabort) xabort 1478 [007] 92161.431360859: tr strt 0 [unknown] ([unknown]) => 400bae main+0x41 (/root/xabort) xabort 1478 [007] 92161.431360882: tr end return 400bb4 main+0x47 (/root/xabort) => 401139 __libc_start_main+0x309 (/root/xabort) After: # perf script --itrace=be -F+flags,+addr,-period,-event --ns xabort 1478 [007] 92161.431348552: tr strt 0 [unknown] ([unknown]) => 400b6d main+0x0 (/root/xabort) xabort 1478 [007] 92161.431348624: tx abrt 400b93 main+0x26 (/root/xabort) => 400b87 main+0x1a (/root/xabort) xabort 1478 [007] 92161.431348637: jcc 400b8a main+0x1d (/root/xabort) => 400b98 main+0x2b (/root/xabort) xabort 1478 [007] 92161.431348644: tr end call 400ba9 main+0x3c (/root/xabort) => 40f690 printf+0x0 (/root/xabort) xabort 1478 [007] 92161.431360859: tr strt 0 [unknown] ([unknown]) => 400bae main+0x41 (/root/xabort) xabort 1478 [007] 92161.431360882: tr end return 400bb4 main+0x47 (/root/xabort) => 401139 __libc_start_main+0x309 (/root/xabort) Fixes: a472e65fc490a ("perf intel-pt: Add decoder support for ptwrite and power event packets") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20210519074515.9262-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03perf intel-pt: Fix sample instruction bytesAdrian Hunter
commit c954eb72b31a9dc56c99b450253ec5b121add320 upstream. The decoder reports the current instruction if it was decoded. In some cases the current instruction is not decoded, in which case the instruction bytes length must be set to zero. Ensure that is always done. Note perf script can anyway get the instruction bytes for any samples where they are not present. Also note, that there is a redundant "ptq->insn_len = 0" statement which is not removed until a subsequent patch in order to make this patch apply cleanly to stable branches. Example: A machne that supports TSX is required. It will have flag "rtm". Kernel parameter tsx=on may be required. # for w in `cat /proc/cpuinfo | grep -m1 flags `;do echo $w | grep rtm ; done rtm Test program: #include <stdio.h> #include <immintrin.h> int main() { int x = 0; if (_xbegin() == _XBEGIN_STARTED) { x = 1; _xabort(1); } else { printf("x = %d\n", x); } return 0; } Compile with -mrtm i.e. gcc -Wall -Wextra -mrtm xabort.c -o xabort Record: perf record -e intel_pt/cyc/u --filter 'filter main @ ./xabort' ./xabort Before: # perf script --itrace=xe -F+flags,+insn,-period --xed --ns xabort 1478 [007] 92161.431348581: transactions: x 400b81 main+0x14 (/root/xabort) mov $0xffffffff, %eax xabort 1478 [007] 92161.431348624: transactions: tx abrt 400b93 main+0x26 (/root/xabort) mov $0xffffffff, %eax After: # perf script --itrace=xe -F+flags,+insn,-period --xed --ns xabort 1478 [007] 92161.431348581: transactions: x 400b81 main+0x14 (/root/xabort) xbegin 0x6 xabort 1478 [007] 92161.431348624: transactions: tx abrt 400b93 main+0x26 (/root/xabort) xabort $0x1 Fixes: faaa87680b25d ("perf intel-pt/bts: Report instruction bytes and length in sample") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20210519074515.9262-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-03tweewide: Fix most Shebang linesFinn Behrens
commit c25ce589dca10d64dde139ae093abc258a32869c upstream. Change every shebang which does not need an argument to use /usr/bin/env. This is needed as not every distro has everything under /usr/bin, sometimes not even bash. Signed-off-by: Finn Behrens <me@kloenk.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> [nicolas@fjasle.eu: update contexts for v4.14, adapt for old scripts] Signed-off-by: Nicolas Schier <nicolas@fjasle.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-22selftests: Set CC to clang in lib.mk if LLVM is setYonghong Song
[ Upstream commit 26e6dd1072763cd5696b75994c03982dde952ad9 ] selftests/bpf/Makefile includes lib.mk. With the following command make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1 some files are still compiled with gcc. This patch fixed lib.mk issue which sets CC to gcc in all cases. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210413153413.3027426-1-yhs@fb.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22perf symbols: Fix dso__fprintf_symbols_by_name() to return the number of ↵Arnaldo Carvalho de Melo
printed chars [ Upstream commit 210e4c89ef61432040c6cd828fefa441f4887186 ] The 'ret' variable was initialized to zero but then it was not updated from the fprintf() return, fix it. Reported-by: Yang Li <yang.lee@linux.alibaba.com> cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> cc: Ingo Molnar <mingo@redhat.com> cc: Jiri Olsa <jolsa@redhat.com> cc: Mark Rutland <mark.rutland@arm.com> cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Fixes: 90f18e63fbd00513 ("perf symbols: List symbols in a dso in ascending name order") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-05-22bpf: fix up selftests after backports were fixedFrank van der Linden
After the backport of the changes to fix CVE 2019-7308, the selftests also need to be fixed up, as was done originally in mainline 80c9b2fae87b ("bpf: add various test cases to selftests"). 4.14 commit 03f11a51a19 ("bpf: Fix selftests are changes for CVE 2019-7308") did that, but since there was an error in the backport, some selftests did not change output. So, add them now that this error has been fixed, and their output has actually changed as expected. This adds the rest of the changed test outputs from 80c9b2fae87b. Fixes: 03f11a51a19 ("bpf: Fix selftests are changes for CVE 2019-7308") Signed-off-by: Frank van der Linden <fllinden@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-04-28ia64: tools: remove duplicate definition of ia64_mf() on ia64John Paul Adrian Glaubitz
[ Upstream commit f4bf09dc3aaa4b07cd15630f2023f68cb2668809 ] The ia64_mf() macro defined in tools/arch/ia64/include/asm/barrier.h is already defined in <asm/gcc_intrin.h> on ia64 which causes libbpf failing to build: CC /usr/src/linux/tools/bpf/bpftool//libbpf/staticobjs/libbpf.o In file included from /usr/src/linux/tools/include/asm/barrier.h:24, from /usr/src/linux/tools/include/linux/ring_buffer.h:4, from libbpf.c:37: /usr/src/linux/tools/include/asm/../../arch/ia64/include/asm/barrier.h:43: error: "ia64_mf" redefined [-Werror] 43 | #define ia64_mf() asm volatile ("mf" ::: "memory") | In file included from /usr/include/ia64-linux-gnu/asm/intrinsics.h:20, from /usr/include/ia64-linux-gnu/asm/swab.h:11, from /usr/include/linux/swab.h:8, from /usr/include/linux/byteorder/little_endian.h:13, from /usr/include/ia64-linux-gnu/asm/byteorder.h:5, from /usr/src/linux/tools/include/uapi/linux/perf_event.h:20, from libbpf.c:36: /usr/include/ia64-linux-gnu/asm/gcc_intrin.h:382: note: this is the location of the previous definition 382 | #define ia64_mf() __asm__ volatile ("mf" ::: "memory") | cc1: all warnings being treated as errors Thus, remove the definition from tools/arch/ia64/include/asm/barrier.h. Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-04-16perf map: Tighten snprintf() string precision to pass gcc check on some ↵Arnaldo Carvalho de Melo
32-bit arches commit 77d02bd00cea9f1a87afe58113fa75b983d6c23a upstream. Noticed on a debian:experimental mips and mipsel cross build build environment: perfbuilder@ec265a086e9b:~$ mips-linux-gnu-gcc --version | head -1 mips-linux-gnu-gcc (Debian 10.2.1-3) 10.2.1 20201224 perfbuilder@ec265a086e9b:~$ CC /tmp/build/perf/util/map.o util/map.c: In function 'map__new': util/map.c:109:5: error: '%s' directive output may be truncated writing between 1 and 2147483645 bytes into a region of size 4096 [-Werror=format-truncation=] 109 | "%s/platforms/%s/arch-%s/usr/lib/%s", | ^~ In file included from /usr/mips-linux-gnu/include/stdio.h:867, from util/symbol.h:11, from util/map.c:2: /usr/mips-linux-gnu/include/bits/stdio2.h:67:10: note: '__builtin___snprintf_chk' output 32 or more bytes (assuming 4294967321) into a destination of size 4096 67 | return __builtin___snprintf_chk (__s, __n, __USE_FORTIFY_LEVEL - 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 68 | __bos (__s), __fmt, __va_arg_pack ()); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Since we have the lenghts for what lands in that place, use it to give the compiler more info and make it happy. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-30perf auxtrace: Fix auxtrace queue conflictAdrian Hunter
[ Upstream commit b410ed2a8572d41c68bd9208555610e4b07d0703 ] The only requirement of an auxtrace queue is that the buffers are in time order. That is achieved by making separate queues for separate perf buffer or AUX area buffer mmaps. That generally means a separate queue per cpu for per-cpu contexts, and a separate queue per thread for per-task contexts. When buffers are added to a queue, perf checks that the buffer cpu and thread id (tid) match the queue cpu and thread id. However, generally, that need not be true, and perf will queue buffers correctly anyway, so the check is not needed. In addition, the check gets erroneously hit when using sample mode to trace multiple threads. Consequently, fix that case by removing the check. Fixes: e502789302a6 ("perf auxtrace: Add helpers for queuing AUX area tracing data") Reported-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lore.kernel.org/lkml/20210308151143.18338-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-30libbpf: Fix INSTALL flag orderGeorgi Valkov
[ Upstream commit e7fb6465d4c8e767e39cbee72464e0060ab3d20c ] It was reported ([0]) that having optional -m flag between source and destination arguments in install command breaks bpftools cross-build on MacOS. Move -m to the front to fix this issue. [0] https://github.com/openwrt/openwrt/pull/3959 Fixes: 7110d80d53f4 ("libbpf: Makefile set specified permission mode") Signed-off-by: Georgi Valkov <gvalkov@abv.bg> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210308183038.613432-1-andrii@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-24tools build feature: Check if pthread_barrier_t is availableArnaldo Carvalho de Melo
commit 25ab5abf5b141d7fd13eed506c7458aa04749c29 upstream. As 'perf bench futex wake-parallel" will use this, which is not available in older systems such as versions of the android NDK used in my container build tests (r12b and r15c at the moment). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: James Yang <james.yang@arm.com Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-1i7iv54in4wj08lwo55b0pzv@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24perf: Make perf able to build with latest libbfdChangbin Du
commit 0ada120c883d4f1f6aafd01cf0fbb10d8bbba015 upstream. libbfd has changed the bfd_section_* macros to inline functions bfd_section_<field> since 2019-09-18. See below two commits: o http://www.sourceware.org/ml/gdb-cvs/2019-09/msg00064.html o https://www.sourceware.org/ml/gdb-cvs/2019-09/msg00072.html This fix make perf able to build with both old and new libbfd. Signed-off-by: Changbin Du <changbin.du@gmail.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200128152938.31413-1-changbin.du@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24tools build: Check if gettid() is available before providing helperArnaldo Carvalho de Melo
commit 4541a8bb13a86e504416a13360c8dc64d2fd612a upstream. Laura reported that the perf build failed in fedora when we got a glibc that provides gettid(), which I reproduced using fedora rawhide with the glibc-devel-2.29.9000-26.fc31.x86_64 package. Add a feature check to avoid providing a gettid() helper in such systems. On a fedora rawhide system with this patch applied we now get: [root@7a5f55352234 perf]# grep gettid /tmp/build/perf/FEATURE-DUMP feature-gettid=1 [root@7a5f55352234 perf]# cat /tmp/build/perf/feature/test-gettid.make.output [root@7a5f55352234 perf]# ldd /tmp/build/perf/feature/test-gettid.bin linux-vdso.so.1 (0x00007ffc6b1f6000) libc.so.6 => /lib64/libc.so.6 (0x00007f04e0a74000) /lib64/ld-linux-x86-64.so.2 (0x00007f04e0c47000) [root@7a5f55352234 perf]# nm /tmp/build/perf/feature/test-gettid.bin | grep -w gettid U gettid@@GLIBC_2.30 [root@7a5f55352234 perf]# While on a fedora:29 system: [acme@quaco perf]$ grep gettid /tmp/build/perf/FEATURE-DUMP feature-gettid=0 [acme@quaco perf]$ cat /tmp/build/perf/feature/test-gettid.make.output test-gettid.c: In function ‘main’: test-gettid.c:8:9: error: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Werror=implicit-function-declaration] return gettid(); ^~~~~~ getgid cc1: all warnings being treated as errors [acme@quaco perf]$ Reported-by: Laura Abbott <labbott@redhat.com> Tested-by: Laura Abbott <labbott@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lkml.kernel.org/n/tip-yfy3ch53agmklwu9o7rlgf9c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24tools build feature: Check if eventfd() is availableArnaldo Carvalho de Melo
commit 11c6cbe706f218a8dc7e1f962f12b3a52ddd33a9 upstream. A new 'perf bench epoll' will use this, and to disable it for older systems, add a feature test for this API. This is just a simple program that if successfully compiled, means that the feature is present, at least at the library level, in a build that sets the output directory to /tmp/build/perf (using O=/tmp/build/perf), we end up with: $ ls -la /tmp/build/perf/feature/test-eventfd* -rwxrwxr-x. 1 acme acme 8176 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.bin -rw-rw-r--. 1 acme acme 588 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.d -rw-rw-r--. 1 acme acme 0 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.make.output $ ldd /tmp/build/perf/feature/test-eventfd.bin linux-vdso.so.1 (0x00007fff3bf3f000) libc.so.6 => /lib64/libc.so.6 (0x00007fa984061000) /lib64/ld-linux-x86-64.so.2 (0x00007fa984417000) $ grep eventfd -A 2 -B 2 /tmp/build/perf/FEATURE-DUMP feature-dwarf=1 feature-dwarf_getlocations=1 feature-eventfd=1 feature-fortify-source=1 feature-sync-compare-and-swap=1 $ The main thing here is that in the end we'll have -DHAVE_EVENTFD in CFLAGS, and then the 'perf bench' entry needing that API can be selectively pruned. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Ahern <dsahern@gmail.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-wkeldwob7dpx6jvtuzl8164k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24tools build feature: Check if get_current_dir_name() is availableArnaldo Carvalho de Melo
commit 8feb8efef97a134933620071e0b6384cb3238b4e upstream. As the namespace support code will use this, which is not available in some non _GNU_SOURCE libraries such as Android's bionic used in my container build tests (r12b and r15c at the moment). Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-x56ypm940pwclwu45d7jfj47@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-24perf tools: Use %define api.pure full instead of %pure-parserJiri Olsa
commit fc8c0a99223367b071c83711259d754b6bb7a379 upstream. bison deprecated the "%pure-parser" directive in favor of "%define api.pure full". The api.pure got introduced in bison 2.3 (Oct 2007), so it seems safe to use it without any version check. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Clark Williams <williams@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20200112192259.GA35080@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-17perf traceevent: Ensure read cmdlines are null terminated.Ian Rogers
commit 137a5258939aca56558f3a23eb229b9c4b293917 upstream. Issue detected by address sanitizer. Fixes: cd4ceb63438e9e28 ("perf util: Save pid-cmdline mapping into tracing header") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20210226221431.1985458-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-11usbip: tools: fix build error for multiple definitionAntonio Borneo
commit d5efc2e6b98fe661dbd8dd0d5d5bfb961728e57a upstream. With GCC 10, building usbip triggers error for multiple definition of 'udev_context', in: - libsrc/vhci_driver.c:18 and - libsrc/usbip_host_common.c:27. Declare as extern the definition in libsrc/usbip_host_common.c. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Acked-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20200618000844.1048309-1-borneo.antonio@gmail.com Cc: Petr Štetiar <ynezz@true.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-03-03perf test: Fix unaligned access in sample parsing testNamhyung Kim
[ Upstream commit c5c97cadd7ed13381cb6b4bef5c841a66938d350 ] The ubsan reported the following error. It was because sample's raw data missed u32 padding at the end. So it broke the alignment of the array after it. The raw data contains an u32 size prefix so the data size should have an u32 padding after 8-byte aligned data. 27: Sample parsing :util/synthetic-events.c:1539:4: runtime error: store to misaligned address 0x62100006b9bc for type '__u64' (aka 'unsigned long long'), which requires 8 byte alignment 0x62100006b9bc: note: pointer points here 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ #0 0x561532a9fc96 in perf_event__synthesize_sample util/synthetic-events.c:1539:13 #1 0x5615327f4a4f in do_test tests/sample-parsing.c:284:8 #2 0x5615327f3f50 in test__sample_parsing tests/sample-parsing.c:381:9 #3 0x56153279d3a1 in run_test tests/builtin-test.c:424:9 #4 0x56153279c836 in test_and_print tests/builtin-test.c:454:9 #5 0x56153279b7eb in __cmd_test tests/builtin-test.c:675:4 #6 0x56153279abf0 in cmd_test tests/builtin-test.c:821:9 #7 0x56153264e796 in run_builtin perf.c:312:11 #8 0x56153264cf03 in handle_internal_command perf.c:364:8 #9 0x56153264e47d in run_argv perf.c:408:2 #10 0x56153264c9a9 in main perf.c:538:3 #11 0x7f137ab6fbbc in __libc_start_main (/lib64/libc.so.6+0x38bbc) #12 0x561532596828 in _start ... SUMMARY: UndefinedBehaviorSanitizer: misaligned-pointer-use util/synthetic-events.c:1539:4 in Fixes: 045f8cd8542d ("perf tests: Add a sample parsing test") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210214091638.519643-1-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-03perf intel-pt: Fix missing CYC processing in PSBAdrian Hunter
[ Upstream commit 03fb0f859b45d1eb05c984ab4bd3bef67e45ede2 ] Add missing CYC packet processing when walking through PSB+. This improves the accuracy of timestamps that follow PSB+, until the next MTC. Fixes: 3d49807870f08 ("perf tools: Add new Intel PT packet definitions") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20210205175350.23817-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-03-03perf tools: Fix DSO filtering when not finding a map for a sampled addressArnaldo Carvalho de Melo
[ Upstream commit c69bf11ad3d30b6bf01cfa538ddff1a59467c734 ] When we lookup an address and don't find a map we should filter that sample if the user specified a list of --dso entries to filter on, fix it. Before: $ perf script sleep 274800 2843.556162: 1 cycles:u: ffffffffbb26bff4 [unknown] ([unknown]) sleep 274800 2843.556168: 1 cycles:u: ffffffffbb2b047d [unknown] ([unknown]) sleep 274800 2843.556171: 1 cycles:u: ffffffffbb2706b2 [unknown] ([unknown]) sleep 274800 2843.556174: 6 cycles:u: ffffffffbb2b0267 [unknown] ([unknown]) sleep 274800 2843.556176: 59 cycles:u: ffffffffbb2b03b1 [unknown] ([unknown]) sleep 274800 2843.556180: 691 cycles:u: ffffffffbb26bff4 [unknown] ([unknown]) sleep 274800 2843.556189: 9160 cycles:u: 7fa9550eeaa3 __GI___tunables_init+0xf3 (/usr/lib64/ld-2.32.so) sleep 274800 2843.556312: 86937 cycles:u: 7fa9550e157b _dl_lookup_symbol_x+0x4b (/usr/lib64/ld-2.32.so) $ So we have some samples we somehow didn't find in a map for, if we now do: $ perf report --stdio --dso /usr/lib64/ld-2.32.so # dso: /usr/lib64/ld-2.32.so # # Total Lost Samples: 0 # # Samples: 8 of event 'cycles:u' # Event count (approx.): 96856 # # Overhead Command Symbol # ........ ....... ........................ # 89.76% sleep [.] _dl_lookup_symbol_x 9.46% sleep [.] __GI___tunables_init 0.71% sleep [k] 0xffffffffbb26bff4 0.06% sleep [k] 0xffffffffbb2b03b1 0.01% sleep [k] 0xffffffffbb2b0267 0.00% sleep [k] 0xffffffffbb2706b2 0.00% sleep [k] 0xffffffffbb2b047d $ After this patch we get the right output with just entries for the DSOs specified in --dso: $ perf report --stdio --dso /usr/lib64/ld-2.32.so # dso: /usr/lib64/ld-2.32.so # # Total Lost Samples: 0 # # Samples: 8 of event 'cycles:u' # Event count (approx.): 96856 # # Overhead Command Symbol # ........ ....... ........................ # 89.76% sleep [.] _dl_lookup_symbol_x 9.46% sleep [.] __GI___tunables_init $ # Fixes: 96415e4d3f5fdf9c ("perf symbols: Avoid unnecessary symbol loading when dso list is specified") Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210128131209.GD775562@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-10objtool: Support Clang non-section symbols in ORC generationJosh Poimboeuf
commit e81e0724432542af8d8c702c31e9d82f57b1ff31 upstream. When compiling the kernel with AS=clang, objtool produces a lot of warnings: warning: objtool: missing symbol for section .text warning: objtool: missing symbol for section .init.text warning: objtool: missing symbol for section .ref.text It then fails to generate the ORC table. The problem is that objtool assumes text section symbols always exist. But the Clang assembler is aggressive about removing them. When generating relocations for the ORC table, objtool always tries to reference instructions by their section symbol offset. If the section symbol doesn't exist, it bails. Do a fallback: when a section symbol isn't available, reference a function symbol instead. Reported-by: Dmitry Golovin <dima@golovin.in> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://github.com/ClangBuiltLinux/linux/issues/669 Link: https://lkml.kernel.org/r/9a9cae7fcf628843aabe5a086b1a3c5bf50f42e8.1585761021.git.jpoimboe@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-07objtool: Don't fail on missing symbol tableJosh Poimboeuf
[ Upstream commit 1d489151e9f9d1647110277ff77282fe4d96d09b ] Thanks to a recent binutils change which doesn't generate unused symbols, it's now possible for thunk_64.o be completely empty without CONFIG_PREEMPTION: no text, no data, no symbols. We could edit the Makefile to only build that file when CONFIG_PREEMPTION is enabled, but that will likely create confusion if/when the thunks end up getting used by some other code again. Just ignore it and move on. Reported-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Link: https://github.com/ClangBuiltLinux/linux/issues/1254 Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-02-03x86/entry/64/compat: Preserve r8-r11 in int $0x80Andy Lutomirski
commit 8bb2610bc4967f19672444a7b0407367f1540028 upstream. 32-bit user code that uses int $80 doesn't care about r8-r11. There is, however, some 64-bit user code that intentionally uses int $0x80 to invoke 32-bit system calls. From what I've seen, basically all such code assumes that r8-r15 are all preserved, but the kernel clobbers r8-r11. Since I doubt that there's any code that depends on int $0x80 zeroing r8-r11, change the kernel to preserve them. I suspect that very little user code is broken by the old clobber, since r8-r11 are only rarely allocated by gcc, and they're clobbered by function calls, so they only way we'd see a problem is if the same function that invokes int $0x80 also spills something important to one of these registers. The current behavior seems to date back to the historical commit "[PATCH] x86-64 merge for 2.6.4". Before that, all regs were preserved. I can't find any explanation of why this change was made. Update the test_syscall_vdso_32 testcase as well to verify the new behavior, and it strengthens the test to make sure that the kernel doesn't accidentally permute r8..r15. Suggested-by: Denys Vlasenko <dvlasenk@redhat.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Link: https://lkml.kernel.org/r/d4c4d9985fbe64f8c9e19291886453914b48caee.1523975710.git.luto@kernel.org Signed-off-by: Alistair Delva <adelva@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-29perf record: Fix memory leak when using '--user-regs=?' to list registersZheng Zengkai
[ Upstream commit 2eb5dd418034ecea2f7031e3d33f2991a878b148 ] When using 'perf record's option '-I' or '--user-regs=' along with argument '?' to list available register names, memory of variable 'os' allocated by strdup() needs to be released before __parse_regs() returns, otherwise memory leak will occur. Fixes: bcc84ec65ad1 ("perf record: Add ability to name registers to record") Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Li Bin <huawei.libin@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20200703093344.189450-1-zhengzengkai@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-11x86/uprobes: Do not use prefixes.nbytes when looping over prefixes.bytesMasami Hiramatsu
commit 4e9a5ae8df5b3365183150f6df49e49dece80d8c upstream Since insn.prefixes.nbytes can be bigger than the size of insn.prefixes.bytes[] when a prefix is repeated, the proper check must be insn.prefixes.bytes[i] != 0 and i < 4 instead of using insn.prefixes.nbytes. Introduce a for_each_insn_prefix() macro for this purpose. Debugged by Kees Cook <keescook@chromium.org>. [ bp: Massage commit message, sync with the respective header in tools/ and drop "we". ] Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints") Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2 [sudip: adjust context, use old insn.h] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-12-02perf probe: Fix to die_entrypc() returns error correctlyMasami Hiramatsu
[ Upstream commit ab4200c17ba6fe71d2da64317aae8a8aa684624c ] Fix die_entrypc() to return error correctly if the DIE has no DW_AT_ranges attribute. Since dwarf_ranges() will treat the case as an empty ranges and return 0, we have to check it by ourselves. Fixes: 91e2f539eeda ("perf probe: Fix to show function entry line as probe-able") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: http://lore.kernel.org/lkml/160645612634.2824037.5284932731175079426.stgit@devnote2 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-12-02perf event: Check ref_reloc_sym before using itIgor Lubashev
commit e9a6882f267a8105461066e3ea6b4b6b9be1b807 upstream. Check for ref_reloc_sym before using it instead of checking symbol_conf.kptr_restrict and relying solely on that check. Reported-by: Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: Igor Lubashev <ilubashe@akamai.com> Tested-by: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1566869956-7154-2-git-send-email-ilubashe@akamai.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Dahl <ada@thorsis.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-24perf lock: Don't free "lock_seq_stat" if read_count isn't zeroLeo Yan
[ Upstream commit b0e5a05cc9e37763c7f19366d94b1a6160c755bc ] When execute command "perf lock report", it hits failure and outputs log as follows: perf: builtin-lock.c:623: report_lock_release_event: Assertion `!(seq->read_count < 0)' failed. Aborted This is an imbalance issue. The locking sequence structure "lock_seq_stat" contains the reader counter and it is used to check if the locking sequence is balance or not between acquiring and releasing. If the tool wrongly frees "lock_seq_stat" when "read_count" isn't zero, the "read_count" will be reset to zero when allocate a new structure at the next time; thus it causes the wrong counting for reader and finally results in imbalance issue. To fix this issue, if detects "read_count" is not zero (means still have read user in the locking sequence), goto the "end" tag to skip freeing structure "lock_seq_stat". Fixes: e4cef1f65061 ("perf lock: Fix state machine to recognize lock sequence") Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Link: https://lore.kernel.org/r/20201104094229.17509-2-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18perf tools: Add missing swap for ino_generationJiri Olsa
[ Upstream commit fe01adb72356a4e2f8735e4128af85921ca98fa1 ] We are missing swap for ino_generation field. Fixes: 5c5e854bc760 ("perf tools: Add attr->mmap2 support") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20201101233103.3537427-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-05perf python scripting: Fix printable strings in python3 scriptsJiri Olsa
commit 6fcd5ddc3b1467b3586972ef785d0d926ae4cdf4 upstream. Hagen reported broken strings in python3 tracepoint scripts: make PYTHON=python3 perf record -e sched:sched_switch -a -- sleep 5 perf script --gen-script py perf script -s ./perf-script.py [..] sched__sched_switch 7 563231.759525792 0 swapper prev_comm=bytearray(b'swapper/7\x00\x00\x00\x00\x00\x00\x00'), prev_pid=0, prev_prio=120, prev_state=, next_comm=bytearray(b'mutex-thread-co\x00'), The problem is in the is_printable_array function that does not take the zero byte into account and claim such string as not printable, so the code will create byte array instead of string. Committer testing: After this fix: sched__sched_switch 3 484522.497072626 1158680 kworker/3:0-eve prev_comm=kworker/3:0, prev_pid=1158680, prev_prio=120, prev_state=I, next_comm=swapper/3, next_pid=0, next_prio=120 Sample: {addr=0, cpu=3, datasrc=84410401, datasrc_decode=N/A|SNP N/A|TLB N/A|LCK N/A, ip=18446744071841817196, period=1, phys_addr=0, pid=1158680, tid=1158680, time=484522497072626, transaction=0, values=[(0, 0)], weight=0} sched__sched_switch 4 484522.497085610 1225814 perf prev_comm=perf, prev_pid=1225814, prev_prio=120, prev_state=, next_comm=migration/4, next_pid=30, next_prio=0 Sample: {addr=0, cpu=4, datasrc=84410401, datasrc_decode=N/A|SNP N/A|TLB N/A|LCK N/A, ip=18446744071841817196, period=1, phys_addr=0, pid=1225814, tid=1225814, time=484522497085610, transaction=0, values=[(0, 0)], weight=0} Fixes: 249de6e07458 ("perf script python: Fix string vs byte array resolving") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Tested-by: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20200928201135.3633850-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-29perf intel-pt: Fix "context_switch event has no tid" errorAdrian Hunter
[ Upstream commit 7d537a8d2e76bc4fc71e34545ceaa463ac2cd928 ] A context_switch event can have no tid because pids can be detached from a task while the task is still running (in do_exit()). Note this won't happen with per-task contexts because then tracing stops at perf_event_exit_task() If a task with no tid gets preempted, or a dying task gets preempted and its parent releases it, when it subsequently gets switched back in, Intel PT will not be able to determine what task is running and prints an error "context_switch event has no tid". However, it is not really an error because the task is in kernel space and the decoder can continue to decode successfully. Fix by changing the error to be only a logged message, and make allowance for tid == -1. Example: Using 5.9-rc4 with Preemptible Kernel (Low-Latency Desktop) e.g. $ uname -r 5.9.0-rc4 $ grep PREEMPT .config # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y CONFIG_PREEMPT_COUNT=y CONFIG_PREEMPTION=y CONFIG_PREEMPT_RCU=y CONFIG_PREEMPT_NOTIFIERS=y CONFIG_DRM_I915_PREEMPT_TIMEOUT=640 CONFIG_DEBUG_PREEMPT=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_PREEMPTIRQ_DELAY_TEST is not set Before: $ cat forkit.c #include <sys/types.h> #include <unistd.h> #include <sys/wait.h> int main() { pid_t child; int status = 0; child = fork(); if (child == 0) return 123; wait(&status); return 0; } $ gcc -o forkit forkit.c $ sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k & [1] 11016 $ taskset 2 ./forkit $ sudo pkill perf $ [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 17.262 MB perf.data ] [1]+ Terminated sudo ~/bin/perf record --kcore -a -m,64M -e intel_pt/cyc/k $ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit context_switch event has no tid taskset 11019 [001] 66663.270045029: 1 instructions:k: ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms]) taskset 11019 [001] 66663.270201816: 1 instructions:k: ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms]) forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019 forkit 11019 [001] 66663.270420028: 1 instructions:k: ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms]) forkit 11019 [001] 66663.270648704: 1 instructions:k: ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms]) forkit 11019 [001] 66663.270833163: 1 instructions:k: ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms]) forkit 11019 [001] 66663.271092359: 1 instructions:k: ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms]) forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019) forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 11020/11020 forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11019/11019 forkit 11020 [001] 66663.271312066: 1 instructions:k: ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms]) forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019) forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11019/11019 forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11020/11020 forkit 11019 [001] 66663.271517241: 1 instructions:k: ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms]) forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386) After: $ sudo ~/bin/perf script --show-task-events --show-switch-events --itrace=iqqe-o -C 1 --ns | grep -C 2 forkit taskset 11019 [001] 66663.270045029: 1 instructions:k: ffffffffb1d9f844 strnlen_user+0xb4 ([kernel.kallsyms]) taskset 11019 [001] 66663.270201816: 1 instructions:k: ffffffffb1a83121 unmap_page_range+0x561 ([kernel.kallsyms]) forkit 11019 [001] 66663.270327553: PERF_RECORD_COMM exec: forkit:11019/11019 forkit 11019 [001] 66663.270420028: 1 instructions:k: ffffffffb1db9537 __clear_user+0x27 ([kernel.kallsyms]) forkit 11019 [001] 66663.270648704: 1 instructions:k: ffffffffb18829e6 do_user_addr_fault+0xf6 ([kernel.kallsyms]) forkit 11019 [001] 66663.270833163: 1 instructions:k: ffffffffb230a825 irqentry_exit_to_user_mode+0x15 ([kernel.kallsyms]) forkit 11019 [001] 66663.271092359: 1 instructions:k: ffffffffb1aea3d9 lock_page_memcg+0x9 ([kernel.kallsyms]) forkit 11019 [001] 66663.271207092: PERF_RECORD_FORK(11020:11020):(11019:11019) forkit 11019 [001] 66663.271234775: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: 11020/11020 forkit 11020 [001] 66663.271238407: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11019/11019 forkit 11020 [001] 66663.271312066: 1 instructions:k: ffffffffb1a88140 handle_mm_fault+0x10 ([kernel.kallsyms]) forkit 11020 [001] 66663.271476225: PERF_RECORD_EXIT(11020:11020):(11019:11019) forkit 11020 [001] 66663.271497488: PERF_RECORD_SWITCH_CPU_WIDE OUT preempt next pid/tid: 11019/11019 forkit 11019 [001] 66663.271500523: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11020/11020 forkit 11019 [001] 66663.271517241: 1 instructions:k: ffffffffb24012cd error_entry+0x6d ([kernel.kallsyms]) forkit 11019 [001] 66663.271664080: PERF_RECORD_EXIT(11019:11019):(1386:1386) forkit 11019 [001] 66663.271688752: PERF_RECORD_SWITCH_CPU_WIDE OUT next pid/tid: -1/-1 :-1 -1 [001] 66663.271692086: PERF_RECORD_SWITCH_CPU_WIDE IN prev pid/tid: 11019/11019 :-1 -1 [001] 66663.271707466: 1 instructions:k: ffffffffb18eb096 update_load_avg+0x306 ([kernel.kallsyms]) Fixes: 86c2786994bd7c ("perf intel-pt: Add support for PERF_RECORD_SWITCH") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Yu-cheng Yu <yu-cheng.yu@intel.com> Link: http://lore.kernel.org/lkml/20200909084923.9096-3-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-14perf top: Fix stdio interface input handling with glibc 2.28+Tommi Rantala
commit 29b4f5f188571c112713c35cc87eefb46efee612 upstream. Since glibc 2.28 when running 'perf top --stdio', input handling no longer works, but hitting any key always just prints the "Mapped keys" help text. To fix it, call clearerr() in the display_thread() loop to clear any EOF sticky errors, as instructed in the glibc NEWS file (https://sourceware.org/git/?p=glibc.git;a=blob;f=NEWS): * All stdio functions now treat end-of-file as a sticky condition. If you read from a file until EOF, and then the file is enlarged by another process, you must call clearerr or another function with the same effect (e.g. fseek, rewind) before you can read the additional data. This corrects a longstanding C99 conformance bug. It is most likely to affect programs that use stdio to read interactive input from a terminal. (Bug #1190.) Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200305083714.9381-2-tommi.t.rantala@nokia.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01objtool: Fix noreturn detection for ignored functionsJosh Poimboeuf
[ Upstream commit db6c6a0df840e3f52c84cc302cc1a08ba11a4416 ] When a function is annotated with STACK_FRAME_NON_STANDARD, objtool doesn't validate its code paths. It also skips sibling call detection within the function. But sibling call detection is actually needed for the case where the ignored function doesn't have any return instructions. Otherwise objtool naively marks the function as implicit static noreturn, which affects the reachability of its callers, resulting in "unreachable instruction" warnings. Fix it by just enabling sibling call detection for ignored functions. The 'insn->ignore' check in add_jump_destinations() is no longer needed after e6da9567959e ("objtool: Don't use ignore flag for fake jumps"). Fixes the following warning: arch/x86/kvm/vmx/vmx.o: warning: objtool: vmx_handle_exit_irqoff()+0x142: unreachable instruction which triggers on an allmodconfig with CONFIG_GCOV_KERNEL unset. Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/5b1e2536cdbaa5246b60d7791b76130a74082c62.1599751464.git.jpoimboe@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01selftests/x86/syscall_nt: Clear weird flags after each testAndy Lutomirski
[ Upstream commit a61fa2799ef9bf6c4f54cf7295036577cececc72 ] Clear the weird flags before logging to improve strace output -- logging results while, say, TF is set does no one any favors. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lkml.kernel.org/r/907bfa5a42d4475b8245e18b67a04b13ca51ffdb.1593191971.git.luto@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01perf kcore_copy: Fix module map when there are no modules loadedAdrian Hunter
[ Upstream commit 61f82e3fb697a8e85f22fdec786528af73dc36d1 ] In the absence of any modules, no "modules" map is created, but there are other executable pages to map, due to eBPF JIT, kprobe or ftrace. Map them by recognizing that the first "module" symbol is not necessarily from a module, and adjust the map accordingly. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: x86@kernel.org Link: http://lore.kernel.org/lkml/20200512121922.8997-10-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01perf util: Fix memory leak of prefix_if_not_inXie XiuQi
[ Upstream commit 07e9a6f538cbeecaf5c55b6f2991416f873cdcbd ] Need to free "str" before return when asprintf() failed to avoid memory leak. Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hongbo Yao <yaohongbo@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Bin <huawei.libin@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200521133218.30150-4-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01tools: gpio-hammer: Avoid potential overflow in mainGabriel Ravier
[ Upstream commit d1ee7e1f5c9191afb69ce46cc7752e4257340a31 ] If '-o' was used more than 64 times in a single invocation of gpio-hammer, this could lead to an overflow of the 'lines' array. This commit fixes this by avoiding the overflow and giving a proper diagnostic back to the user Signed-off-by: Gabriel Ravier <gabravier@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01perf cpumap: Fix snprintf overflow checkChristophe JAILLET
[ Upstream commit d74b181a028bb5a468f0c609553eff6a8fdf4887 ] 'snprintf' returns the number of characters which would be generated for the given input. If the returned value is *greater than* or equal to the buffer size, it means that the output has been truncated. Fix the overflow test accordingly. Fixes: 7780c25bae59f ("perf tools: Allow ability to map cpus to nodes easily") Fixes: 92a7e1278005b ("perf cpumap: Add cpu__max_present_cpu()") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Suggested-by: David Laight <David.Laight@ACULAB.COM> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Don Zickus <dzickus@redhat.com> Cc: He Zhe <zhe.he@windriver.com> Cc: Jan Stancek <jstancek@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: kernel-janitors@vger.kernel.org Link: http://lore.kernel.org/lkml/20200324070319.10901-1-christophe.jaillet@wanadoo.fr Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01perf test: Fix test trace+probe_vfs_getname.sh on s390Thomas Richter
[ Upstream commit 2bbc83537614517730e9f2811195004b712de207 ] This test places a kprobe to function getname_flags() in the kernel which has the following prototype: struct filename *getname_flags(const char __user *filename, int flags, int *empty) The 'filename' argument points to a filename located in user space memory. Looking at commit 88903c464321c ("tracing/probe: Add ustring type for user-space string") the kprobe should indicate that user space memory is accessed. Output before: [root@m35lp76 perf]# ./perf test 66 67 66: Use vfs_getname probe to get syscall args filenames : FAILED! 67: Check open filename arg using perf trace + vfs_getname: FAILED! [root@m35lp76 perf]# Output after: [root@m35lp76 perf]# ./perf test 66 67 66: Use vfs_getname probe to get syscall args filenames : Ok 67: Check open filename arg using perf trace + vfs_getname: Ok [root@m35lp76 perf]# Comments from Masami Hiramatsu: This bug doesn't happen on x86 or other archs on which user address space and kernel address space is the same. On some arches (ppc64 in this case?) user address space is partially or completely the same as kernel address space. (Yes, they switch the world when running into the kernel) In this case, we need to use different data access functions for each space. That is why I introduced the "ustring" type for kprobe events. As far as I can see, Thomas's patch is sane. Thomas, could you show us your result on your test environment? Comments from Thomas Richter: Test results for s/390 included above. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: http://lore.kernel.org/lkml/20200217102111.61137-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01tools/power/x86/intel_pstate_tracer: changes for python 3 compatibilityDoug Smythies
[ Upstream commit e749e09db30c38f1a275945814b0109e530a07b0 ] Some syntax needs to be more rigorous for python 3. Backwards compatibility tested with python 2.7 Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01selftests/ftrace: fix glob selftestSven Schnelle
[ Upstream commit af4ddd607dff7aabd466a4a878e01b9f592a75ab ] test.d/ftrace/func-filter-glob.tc is failing on s390 because it has ARCH_INLINE_SPIN_LOCK and friends set to 'y'. So the usual __raw_spin_lock symbol isn't in the ftrace function list. Change '*aw*lock' to '*spin*lock' which would hopefully match some of the locking functions on all platforms. Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23perf test: Free formats for perf pmu parse testNamhyung Kim
[ Upstream commit d26383dcb2b4b8629fde05270b4e3633be9e3d4b ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) #1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 #2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 #3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 #4 0x560578e07045 in test__pmu tests/pmu.c:155 #5 0x560578de109b in run_test tests/builtin-test.c:410 #6 0x560578de109b in test_and_print tests/builtin-test.c:440 #7 0x560578de401a in __cmd_test tests/builtin-test.c:661 #8 0x560578de401a in cmd_test tests/builtin-test.c:807 #9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 #10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 #11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 #12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 #13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f956ec4a1 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-09perf tools: Correct SNOOPX field offsetAl Grant
[ Upstream commit 39c0a53b114d0317e5c4e76b631f41d133af5cb0 ] perf_event.h has macros that define the field offsets in the data_src bitmask in perf records. The SNOOPX and REMOTE offsets were both 37. These are distinct fields, and the bitfield layout in perf_mem_data_src confirms that SNOOPX should be at offset 38. Committer notes: This was extracted from a larger patch that also contained kernel changes. Fixes: 52839e653b5629bd ("perf tools: Add support for printing new mem_info encodings") Signed-off-by: Al Grant <al.grant@arm.com> Reviewed-by: Andi Kleen <ak@linux.intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/9974f2d0-bf7f-518e-d9f7-4520e5ff1bb0@foss.arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-23 12:45:19 +0000