summaryrefslogtreecommitdiffstats
path: root/sound
AgeCommit message (Collapse)Author
2019-08-29ASoC: ti: davinci-mcasp: Fix clk PDIR handling for i2s master modePeter Ujfalusi
[ Upstream commit 34a2a80ff30b5d2330abfa8980c7f0cc15a8158a ] When running McASP as master capture alone will not record any audio unless a parallel playback stream is running. As soon as the playback stops the captured data is going to be silent again. In McASP master mode we need to set the PDIR for the clock pins and fix the mcasp_set_axr_pdir() to skip the bits in the PDIR registers above AMUTE. This went unnoticed as most of the boards uses McASP as slave and neither of these issues are visible (audible) in those setups. Fixes: ca3d9433349e ("ASoC: davinci-mcasp: Update PDIR (pin direction) register handling") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190725083423.7321-1-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-29ASoC: Fail card instantiation if DAI format setup failsRicard Wanderlof
[ Upstream commit 40aa5383e393d72f6aa3943a4e7b1aae25a1e43b ] If the DAI format setup fails, there is no valid communication format between CPU and CODEC, so fail card instantiation, rather than continue with a card that will most likely not function properly. Signed-off-by: Ricard Wanderlof <ricardw@axis.com> Link: https://lore.kernel.org/r/alpine.DEB.2.20.1907241132350.6338@lnxricardw1.se.axis.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-29ASoC: dapm: fix a memory leak bugWenwen Wang
[ Upstream commit 45004d66f2a28d78f543fb2ffbc133e31dc2d162 ] In snd_soc_dapm_new_control_unlocked(), a kernel buffer is allocated in dapm_cnew_widget() to hold the new dapm widget. Then, different actions are taken according to the id of the widget, i.e., 'w->id'. If any failure occurs during this process, snd_soc_dapm_new_control_unlocked() should be terminated by going to the 'request_failed' label. However, the allocated kernel buffer is not freed on this code path, leading to a memory leak bug. To fix the above issue, free the buffer before returning from snd_soc_dapm_new_control_unlocked() through the 'request_failed' label. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Link: https://lore.kernel.org/r/1563803864-2809-1-git-send-email-wang6495@umn.edu Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-29ASoC: dapm: Fix handling of custom_stop_condition on DAPM graph walksCharles Keepax
[ Upstream commit 8dd26dff00c0636b1d8621acaeef3f6f3a39dd77 ] DPCM uses snd_soc_dapm_dai_get_connected_widgets to build a list of the widgets connected to a specific front end DAI so it can search through this list for available back end DAIs. The custom_stop_condition was added to is_connected_ep to facilitate this list not containing more widgets than is necessary. Doing so both speeds up the DPCM handling as less widgets need to be searched and avoids issues with CODEC to CODEC links as these would be confused with back end DAIs if they appeared in the list of available widgets. custom_stop_condition was implemented by aborting the graph walk when the condition is triggered, however there is an issue with this approach. Whilst walking the graph is_connected_ep should update the endpoints cache on each widget, if the walk is aborted the number of attached end points is unknown for that sub-graph. When the stop condition triggered, the original patch ignored the triggering widget and returned zero connected end points; a later patch updated this to set the triggering widget's cache to 1 and return that. Both of these approaches result in inaccurate values being stored in various end point caches as the values propagate back through the graph, which can result in later issues with widgets powering/not powering unexpectedly. As the original goal was to reduce the size of the widget list passed to the DPCM code, the simplest solution is to limit the functionality of the custom_stop_condition to the widget list. This means the rest of the graph will still be processed resulting in correct end point caches, but only widgets up to the stop condition will be added to the returned widget list. Fixes: 6742064aef7f ("ASoC: dapm: support user-defined stop condition in dai_get_connected_widgets") Fixes: 5fdd022c2026 ("ASoC: dpcm: play nice with CODEC<->CODEC links") Fixes: 09464974eaa8 ("ASoC: dapm: Fix to return correct path list in is_connected_ep.") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190718084333.15598-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-29ASoC: Intel: bytcht_es8316: Add quirk for Irbis NB41 netbookHans de Goede
[ Upstream commit aa2ba991c4206d5b778dcaa7b4997396e79f8e90 ] The Irbis NB41 netbook has its internal mic on IN2, inverted jack-detect and stereo speakers, add a quirk for this. Cc: russianneuromancer@ya.ru Reported-and-tested-by: russianneuromancer@ya.ru Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20190712112708.25327-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-29ASoC: samsung: odroid: fix a double-free issue for cpu_daiWen Yang
[ Upstream commit 2abee12c0ab1924a69993d2c063a39a952e7d836 ] The cpu_dai variable is still being used after the of_node_put() call, which may result in double-free: of_node_put(cpu_dai); ---> released here ret = devm_snd_soc_register_card(dev, card); if (ret < 0) { ... goto err_put_clk_i2s; --> jump to err_put_clk_i2s ... err_put_clk_i2s: clk_put(priv->clk_i2s_bus); err_put_sclk: clk_put(priv->sclk_i2s); err_put_cpu_dai: of_node_put(cpu_dai); --> double-free here Fixes: d832d2b246c5 ("ASoC: samsung: odroid: Fix of_node refcount unbalance") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/1562989575-33785-3-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-29ASoC: samsung: odroid: fix an use-after-free issue for codecWen Yang
[ Upstream commit 9b6d104a6b150bd4d3e5b039340e1f6b20c2e3c1 ] The codec variable is still being used after the of_node_put() call, which may result in use-after-free. Fixes: bc3cf17b575a ("ASoC: samsung: odroid: Add support for secondary CPU DAI") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/1562989575-33785-2-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-29ASoC: audio-graph-card: add missing const at graph_get_dai_id()Kuninori Morimoto
[ Upstream commit ec3042ad39d4e2ddbc3a3344f90bb10d8feb53bc ] commit c152f8491a8d9 ("ASoC: audio-graph-card: fix an use-after-free in graph_get_dai_id()") fixups use-after-free issue, but, it need to use "const" for reg. This patch adds it. We will have below without this patch LINUX/sound/soc/generic/audio-graph-card.c: In function 'graph_get_dai_id': LINUX/sound/soc/generic/audio-graph-card.c:87:7: warning: assignment discards\ 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] reg = of_get_property(node, "reg", NULL); Fixes: c152f8491a8d9 ("ASoC: audio-graph-card: fix an use-after-free in graph_get_dai_id()") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Wen Yang <wen.yang99@zte.com.cn> Link: https://lore.kernel.org/r/87sgrd43ja.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-29ASoC: audio-graph-card: fix an use-after-free in graph_get_dai_id()Wen Yang
[ Upstream commit c152f8491a8d9a4b25afd65a86eb5e55e2a8c380 ] After calling of_node_put() on the node variable, it is still being used, which may result in use-after-free. Fix this issue by calling of_node_put() after the last usage. Fixes: a0c426fe1433 ("ASoC: simple-card-utils: check "reg" property on asoc_simple_card_get_dai_id()") Link: https://lore.kernel.org/r/1562743509-30496-5-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-29ASoC: audio-graph-card: fix use-after-free in graph_dai_link_of_dpcm()Wen Yang
[ Upstream commit aa2e362cb6b3f5ca88093ada01e1a0ace8a517b2 ] After calling of_node_put() on the ports, port, and node variables, they are still being used, which may result in use-after-free. Fix this issue by calling of_node_put() after the last usage. Fixes: dd98fbc558a0 ("ASoC: audio-graph-card: cleanup DAI link loop method - step1") Link: https://lore.kernel.org/r/1562743509-30496-4-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-29ASoC: simple-card: fix an use-after-free in simple_for_each_link()Wen Yang
[ Upstream commit 27862d5a3325bc531ec15e3c607e44aa0fd57f6f ] The codec variable is still being used after the of_node_put() call, which may result in use-after-free. Fixes: d947cdfd4be2 ("ASoC: simple-card: cleanup DAI link loop method - step1") Link: https://lore.kernel.org/r/1562743509-30496-3-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-29ASoC: simple-card: fix an use-after-free in simple_dai_link_of_dpcm()Wen Yang
[ Upstream commit 724808ad556c15e9473418d082f8aae81dd267f6 ] The node variable is still being used after the of_node_put() call, which may result in use-after-free. Fixes: cfc652a73331 ("ASoC: simple-card: tidyup prefix for snd_soc_codec_conf") Link: https://lore.kernel.org/r/1562743509-30496-2-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25ALSA: pcm: fix lost wakeup event scenarios in snd_pcm_drainYuki Tsunashima
[ Upstream commit 37151a41df800493cfcbbef4f7208ffe04feb959 ] lost wakeup can occur after enabling irq, therefore put task into interruptible before enabling interrupts, without this change, task can be put to sleep and snd_pcm_drain will delay Fixes: f2b3614cefb6 ("ALSA: PCM - Don't check DMA time-out too shortly") Signed-off-by: Yuki Tsunashima <ytsunashima@jp.adit-jv.com> Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com> [ported from 4.9] Signed-off-by: Adam Miartus <amiartus@de.adit-jv.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-25ALSA: hda - Let all conexant codec enter D3 when rebootingHui Wang
commit 401714d9534aad8c24196b32600da683116bbe09 upstream. We have 3 new lenovo laptops which have conexant codec 0x14f11f86, these 3 laptops also have the noise issue when rebooting, after letting the codec enter D3 before rebooting or poweroff, the noise disappers. Instead of adding a new ID again in the reboot_notify(), let us make this function apply to all conexant codec. In theory make codec enter D3 before rebooting or poweroff is harmless, and I tested this change on a couple of other Lenovo laptops which have different conexant codecs, there is no side effect so far. Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-25ALSA: hda - Add a generic reboot_notifyHui Wang
commit 871b9066027702e6e6589da0e1edd3b7dede7205 upstream. Make codec enter D3 before rebooting or poweroff can fix the noise issue on some laptops. And in theory it is harmless for all codecs to enter D3 before rebooting or poweroff, let us add a generic reboot_notify, then realtek and conexant drivers can call this function. Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-25ALSA: hda - Fix a memory leak bugWenwen Wang
commit cfef67f016e4c00a2f423256fc678a6967a9fc09 upstream. In snd_hda_parse_generic_codec(), 'spec' is allocated through kzalloc(). Then, the pin widgets in 'codec' are parsed. However, if the parsing process fails, 'spec' is not deallocated, leading to a memory leak. To fix the above issue, free 'spec' before returning the error. Fixes: 352f7f914ebb ("ALSA: hda - Merge Realtek parser code to generic parser") Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-25ALSA: hda - Apply workaround for another AMD chip 1022:1487Takashi Iwai
commit de768ce45466f3009809719eb7b1f6f5277d9373 upstream. MSI MPG X570 board is with another AMD HD-audio controller (PCI ID 1022:1487) and it requires the same workaround applied for X370, etc (PCI ID 1022:1457). BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195303 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-25ALSA: usb-audio: Fix an OOB bug in parse_audio_mixer_unitHui Peng
commit daac07156b330b18eb5071aec4b3ddca1c377f2c upstream. The `uac_mixer_unit_descriptor` shown as below is read from the device side. In `parse_audio_mixer_unit`, `baSourceID` field is accessed from index 0 to `bNrInPins` - 1, the current implementation assumes that descriptor is always valid (the length of descriptor is no shorter than 5 + `bNrInPins`). If a descriptor read from the device side is invalid, it may trigger out-of-bound memory access. ``` struct uac_mixer_unit_descriptor { __u8 bLength; __u8 bDescriptorType; __u8 bDescriptorSubtype; __u8 bUnitID; __u8 bNrInPins; __u8 baSourceID[]; } ``` This patch fixes the bug by add a sanity check on the length of the descriptor. Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Cc: <stable@vger.kernel.org> Signed-off-by: Hui Peng <benquike@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-25ALSA: usb-audio: Fix a stack buffer overflow bug in check_input_termHui Peng
commit 19bce474c45be69a284ecee660aa12d8f1e88f18 upstream. `check_input_term` recursively calls itself with input from device side (e.g., uac_input_terminal_descriptor.bCSourceID) as argument (id). In `check_input_term`, if `check_input_term` is called with the same `id` argument as the caller, it triggers endless recursive call, resulting kernel space stack overflow. This patch fixes the bug by adding a bitmap to `struct mixer_build` to keep track of the checked ids and stop the execution if some id has been checked (similar to how parse_audio_unit handles unitid argument). Reported-by: Hui Peng <benquike@gmail.com> Reported-by: Mathias Payer <mathias.payer@nebelwelt.net> Signed-off-by: Hui Peng <benquike@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-25ALSA: hda/realtek - Add quirk for HP Envy x360Takashi Iwai
commit 190d03814eb3b49d4f87ff38fef26d36f3568a60 upstream. HP Envy x360 (AMD Ryzen-based model) with 103c:8497 needs the same quirk like HP Spectre x360 for enabling the mute LED over Mic3 pin. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204373 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16ALSA: hda - Workaround for crackled sound on AMD controller (1022:1457)Takashi Iwai
commit c02f77d32d2c45cfb1b2bb99eabd8a78f5ecc7db upstream. A long-time problem on the recent AMD chip (X370, X470, B450, etc with PCI ID 1022:1457) with Realtek codecs is the crackled or distorted sound for capture streams, as well as occasional playback hiccups. After lengthy debugging sessions, the workarounds we've found are like the following: - Set up the proper driver caps for this controller, similar as the other AMD controller. - Correct the DMA position reporting with the fixed FIFO size, which is similar like as workaround used for VIA chip set. - Even after the position correction, PulseAudio still shows mysterious stalls of playback streams when a capture is triggered in timer-scheduled mode. Since we have no clear way to eliminate the stall, pass the BATCH PCM flag for PA to suppress the tsched mode as a temporary workaround. This patch implements the workarounds. For the driver caps, it defines a new preset, AXZ_DCAPS_PRESET_AMD_SB. It enables the FIFO- corrected position reporting (corresponding to the new position_fix=6) and enforces the SNDRV_PCM_INFO_BATCH flag. Note that the current implementation is merely a workaround. Hopefully we'll find a better alternative in future, especially about removing the BATCH flag hack again. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=195303 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16ALSA: hda - Don't override global PCM hw info flagTakashi Iwai
commit c1c6c877b0c79fd7e05c931435aa42211eaeebaf upstream. The commit bfcba288b97f ("ALSA - hda: Add support for link audio time reporting") introduced the conditional PCM hw info setup, but it overwrites the global azx_pcm_hw object. This will cause a problem if any other HD-audio controller, as it'll inherit the same bit flag although another controller doesn't support that feature. Fix the bug by setting the PCM hw info flag locally. Fixes: bfcba288b97f ("ALSA - hda: Add support for link audio time reporting") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16ALSA: hiface: fix multiple memory leak bugsWenwen Wang
commit 3d92aa45fbfd7319e3a19f4ec59fd32b3862b723 upstream. In hiface_pcm_init(), 'rt' is firstly allocated through kzalloc(). Later on, hiface_pcm_init_urb() is invoked to initialize 'rt->out_urbs[i]'. In hiface_pcm_init_urb(), 'rt->out_urbs[i].buffer' is allocated through kzalloc(). However, if hiface_pcm_init_urb() fails, both 'rt' and 'rt->out_urbs[i].buffer' are not deallocated, leading to memory leak bugs. Also, 'rt->out_urbs[i].buffer' is not deallocated if snd_pcm_new() fails. To fix the above issues, free 'rt' and 'rt->out_urbs[i].buffer'. Fixes: a91c3fb2f842 ("Add M2Tech hiFace USB-SPDIF driver") Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16ALSA: firewire: fix a memory leak bugWenwen Wang
commit 1be3c1fae6c1e1f5bb982b255d2034034454527a upstream. In iso_packets_buffer_init(), 'b->packets' is allocated through kmalloc_array(). Then, the aligned packet size is checked. If it is larger than PAGE_SIZE, -EINVAL will be returned to indicate the error. However, the allocated 'b->packets' is not deallocated on this path, leading to a memory leak. To fix the above issue, free 'b->packets' before returning the error code. Fixes: 31ef9134eb52 ("ALSA: add LaCie FireWire Speakers/Griffin FireWave Surround driver") Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> # v2.6.39+ Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16ALSA: usb-audio: fix a memory leak bugWenwen Wang
commit a67060201b746a308b1674f66bf289c9faef6d09 upstream. In snd_usb_get_audioformat_uac3(), a structure for channel maps 'chmap' is allocated through kzalloc() before the execution goto 'found_clock'. However, this structure is not deallocated if the memory allocation for 'pd' fails, leading to a memory leak bug. To fix the above issue, free 'fp->chmap' before returning NULL. Fixes: 7edf3b5e6a45 ("ALSA: usb-audio: AudioStreaming Power Domain parsing") Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-16ALSA: compress: Be more restrictive about when a drain is allowedCharles Keepax
[ Upstream commit 3b8179944cb0dd53e5223996966746cdc8a60657 ] Draining makes little sense in the situation of hardware overrun, as the hardware will have consumed all its available samples. Additionally, draining whilst the stream is paused would presumably get stuck as no data is being consumed on the DSP side. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-16ALSA: compress: Don't allow paritial drain operations on capture streamsCharles Keepax
[ Upstream commit a70ab8a8645083f3700814e757f2940a88b7ef88 ] Partial drain and next track are intended for gapless playback and don't really have an obvious interpretation for a capture stream, so makes sense to not allow those operations on capture streams. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-16ALSA: compress: Prevent bypasses of set_paramsCharles Keepax
[ Upstream commit 26c3f1542f5064310ad26794c09321780d00c57d ] Currently, whilst in SNDRV_PCM_STATE_OPEN it is possible to call snd_compr_stop, snd_compr_drain and snd_compr_partial_drain, which allow a transition to SNDRV_PCM_STATE_SETUP. The stream should only be able to move to the setup state once it has received a SNDRV_COMPRESS_SET_PARAMS ioctl. Fix this issue by not allowing those ioctls whilst in the open state. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-16ALSA: compress: Fix regression on compressed capture streamsCharles Keepax
[ Upstream commit 4475f8c4ab7b248991a60d9c02808dbb813d6be8 ] A previous fix to the stop handling on compressed capture streams causes some knock on issues. The previous fix updated snd_compr_drain_notify to set the state back to PREPARED for capture streams. This causes some issues however as the handling for snd_compr_poll differs between the two states and some user-space applications were relying on the poll failing after the stream had been stopped. To correct this regression whilst still fixing the original problem the patch was addressing, update the capture handling to skip the PREPARED state rather than skipping the SETUP state as it has done until now. Fixes: 4f2ab5e1d13d ("ALSA: compress: Fix stop handling on compressed capture streams") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-16sound: fix a memory leak bugWenwen Wang
commit c7cd7c748a3250ca33509f9235efab9c803aca09 upstream. In sound_insert_unit(), the controlling structure 's' is allocated through kmalloc(). Then it is added to the sound driver list by invoking __sound_insert_unit(). Later on, if __register_chrdev() fails, 's' is removed from the list through __sound_remove_unit(). If 'index' is not less than 0, -EBUSY is returned to indicate the error. However, 's' is not deallocated on this execution path, leading to a memory leak bug. To fix the above issue, free 's' before -EBUSY is returned. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-09ALSA: usb-audio: Fix gpf in snd_usb_pipe_sanity_checkHillf Danton
[ Upstream commit 5d78e1c2b7f4be00bbe62141603a631dc7812f35 ] syzbot found the following crash on: general protection fault: 0000 [#1] SMP KASAN RIP: 0010:snd_usb_pipe_sanity_check+0x80/0x130 sound/usb/helper.c:75 Call Trace: snd_usb_motu_microbookii_communicate.constprop.0+0xa0/0x2fb sound/usb/quirks.c:1007 snd_usb_motu_microbookii_boot_quirk sound/usb/quirks.c:1051 [inline] snd_usb_apply_boot_quirk.cold+0x163/0x370 sound/usb/quirks.c:1280 usb_audio_probe+0x2ec/0x2010 sound/usb/card.c:576 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x650 drivers/base/dd.c:548 .... It was introduced in commit 801ebf1043ae for checking pipe and endpoint types. It is fixed by adding a check of the ep pointer in question. BugLink: https://syzkaller.appspot.com/bug?extid=d59c4387bfb6eced94e2 Reported-by: syzbot <syzbot+d59c4387bfb6eced94e2@syzkaller.appspotmail.com> Fixes: 801ebf1043ae ("ALSA: usb-audio: Sanity checks for each pipe and EP types") Cc: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-09ALSA: usb-audio: Sanity checks for each pipe and EP typesTakashi Iwai
[ Upstream commit 801ebf1043ae7b182588554cc9b9ad3c14bc2ab5 ] The recent USB core code performs sanity checks for the given pipe and EP types, and it can be hit by manipulated USB descriptors by syzbot. For making syzbot happier, this patch introduces a local helper for a sanity check in the driver side and calls it at each place before the message handling, so that we can avoid the WARNING splats. Reported-by: syzbot+d952e5e28f5fb7718d23@syzkaller.appspotmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-08-06ALSA: hda: Fix 1-minute detection delay when i915 module is not availableSamuel Thibault
commit 74bf71ed792ab0f64631cc65ccdb54c356c36d45 upstream. Distribution installation images such as Debian include different sets of modules which can be downloaded dynamically. Such images may notably include the hda sound modules but not the i915 DRM module, even if the latter was enabled at build time, as reported on https://bugs.debian.org/931507 In such a case hdac_i915 would be linked in and try to load the i915 module, fail since it is not there, but still wait for a whole minute before giving up binding with it. This fixes such as case by only waiting for the binding if the module was properly loaded (or module support is disabled, in which case i915 is already compiled-in anyway). Fixes: f9b54e1961c7 ("ALSA: hda/i915: Allow delayed i915 audio component binding") Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-31ALSA: hda - Add a conexant codec entry to let mute led workHui Wang
commit 3f8809499bf02ef7874254c5e23fc764a47a21a0 upstream. This conexant codec isn't in the supported codec list yet, the hda generic driver can drive this codec well, but on a Lenovo machine with mute/mic-mute leds, we need to apply CXT_FIXUP_THINKPAD_ACPI to make the leds work. After adding this codec to the list, the driver patch_conexant.c will apply THINKPAD_ACPI to this machine. Cc: stable@vger.kernel.org Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-31ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chipsTakashi Iwai
commit 2756d9143aa517b97961e85412882b8ce31371a6 upstream. It turned out that the recent Intel HD-audio controller chips show a significant stall during the system PM resume intermittently. It doesn't happen so often and usually it may read back successfully after one or more seconds, but in some rare worst cases the driver went into fallback mode. After trial-and-error, we found out that the communication stall seems covered by issuing the sync after each verb write, as already done for AMD and other chipsets. So this patch enables the write-sync flag for the recent Intel chips, Skylake and onward, as a workaround. Also, since Broxton and co have the very same driver flags as Skylake, refer to the Skylake driver flags instead of defining the same contents again for simplification. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=201901 Reported-and-tested-by: Todd Brandt <todd.e.brandt@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-31ALSA: pcm: Fix refcount_inc() on zero usageTakashi Iwai
commit 0e279dcea0ec897af1c979ebee4ec92b461793f5 upstream. The recent rewrite of PCM link lock management introduced the refcount in snd_pcm_group object, managed by the kernel refcount_t API. This caused unexpected kernel warnings when the kernel is built with CONFIG_REFCOUNT_FULL=y. As the warning line indicates, the problem is obviously that we start with refcount=0 and do refcount_inc() for adding each PCM link, while refcount_t API doesn't like refcount_inc() performed on zero. For adapting the proper refcount_t usage, this patch changes the logic slightly: - The initial refcount is 1, assuming the single list entry - The refcount is incremented / decremented at each PCM link addition and deletion - ... which allows us concentrating only on the refcount as a release condition Fixes: f57f3df03a8e ("ALSA: pcm: More fine-grained PCM link locking") BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204221 Reported-and-tested-by: Duncan Overbruck <kernel@duncano.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-31ALSA: line6: Fix wrong altsetting for LINE6_PODHD500_1Kai-Heng Feng
commit 70256b42caaf3e13c2932c2be7903a73fbe8bb8b upstream. Commit 7b9584fa1c0b ("staging: line6: Move altsetting to properties") set a wrong altsetting for LINE6_PODHD500_1 during refactoring. Set the correct altsetting number to fix the issue. BugLink: https://bugs.launchpad.net/bugs/1790595 Fixes: 7b9584fa1c0b ("staging: line6: Move altsetting to properties") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-31ALSA: ac97: Fix double free of ac97_codec_deviceDing Xiang
commit 607975b30db41aad6edc846ed567191aa6b7d893 upstream. put_device will call ac97_codec_release to free ac97_codec_device and other resources, so remove the kfree and other redundant code. Fixes: 74426fbff66e ("ALSA: ac97: add an ac97 bus") Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26ALSA: hda/hdmi - Fix i915 reverse port/pin mappingTakashi Iwai
commit 3140aafb22edeab0cc41f15f53b12a118c0ac215 upstream. The recent fix for Icelake HDMI codec introduced the mapping from pin NID to the i915 gfx port number. However, it forgot the reverse mapping from the port number to the pin NID that is used in the ELD notifier callback. As a result, it's processed to a wrong widget and gives a warning like snd_hda_codec_hdmi hdaudioC0D2: HDMI: pin nid 5 not registered This patch corrects it with a proper reverse mapping function. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204133 Fixes: b0d8bc50b9f2 ("ALSA: hda: hdmi - add Icelake support") Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26ALSA: hda/hdmi - Remove duplicated defineTakashi Iwai
commit eb4177116bf568a413c544eca3f4446cb4064be9 upstream. INTEL_GET_VENDOR_VERB is defined twice identically. Let's remove a superfluous line. Fixes: b0d8bc50b9f2 ("ALSA: hda: hdmi - add Icelake support") Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26ALSA: hda/realtek: apply ALC891 headset fixup to one Dell machineHui Wang
commit 4b4e0e32e4b09274dbc9d173016c1a026f44608c upstream. Without this patch, the headset-mic and headphone-mic don't work. Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26ALSA: hda/realtek - Fixed Headphone Mic can't record on Dell platformKailang Yang
commit fbc571290d9f7bfe089c50f4ac4028dd98ebfe98 upstream. It assigned to wrong model. So, The headphone Mic can't work. Fixes: 3f640970a414 ("ALSA: hda - Fix headset mic detection problem for several Dell laptops") Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26ALSA: hda - Don't resume forcibly i915 HDMI/DP codecTakashi Iwai
commit 4914da2fb0c89205790503f20dfdde854f3afdd8 upstream. We apply the codec resume forcibly at system resume callback for updating and syncing the jack detection state that may have changed during sleeping. This is, however, superfluous for the codec like Intel HDMI/DP, where the jack detection is managed via the audio component notification; i.e. the jack state change shall be reported sooner or later from the graphics side at mode change. This patch changes the codec resume callback to avoid the forcible resume conditionally with a new flag, codec->relaxed_resume, for reducing the resume time. The flag is set in the codec probe. Although this doesn't fix the entire bug mentioned in the bugzilla entry below, it's still a good optimization and some improvements are seen. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201901 Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26ALSA: seq: Break too long mutex context in the write loopTakashi Iwai
commit ede34f397ddb063b145b9e7d79c6026f819ded13 upstream. The fix for the racy writes and ioctls to sequencer widened the application of client->ioctl_mutex to the whole write loop. Although it does unlock/relock for the lengthy operation like the event dup, the loop keeps the ioctl_mutex for the whole time in other situations. This may take quite long time if the user-space would give a huge buffer, and this is a likely cause of some weird behavior spotted by syzcaller fuzzer. This patch puts a simple workaround, just adding a mutex break in the loop when a large number of events have been processed. This shouldn't hit any performance drop because the threshold is set high enough for usual operations. Fixes: 7bd800915677 ("ALSA: seq: More protection for concurrent write and ioctl races") Reported-by: syzbot+97aae04ce27e39cbfca9@syzkaller.appspotmail.com Reported-by: syzbot+4c595632b98bb8ffcc66@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26ASoC: core: Adapt for debugfs API changeMark Brown
commit c2c928c93173f220955030e8440517b87ec7df92 upstream. Back in ff9fb72bc07705c (debugfs: return error values, not NULL) the debugfs APIs were changed to return error pointers rather than NULL pointers on error, breaking the error checking in ASoC. Update the code to use IS_ERR() and log the codes that are returned as part of the error messages. Fixes: ff9fb72bc07705c (debugfs: return error values, not NULL) Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26ASoC: dapm: Adapt for debugfs API changeMark Brown
commit ceaea851b9ea75f9ea2bbefb53ff0d4b27cd5a6e upstream. Back in ff9fb72bc07705c (debugfs: return error values, not NULL) the debugfs APIs were changed to return error pointers rather than NULL pointers on error, breaking the error checking in ASoC. Update the code to use IS_ERR() and log the codes that are returned as part of the error messages. Fixes: ff9fb72bc07705c (debugfs: return error values, not NULL) Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26ASoC: audio-graph-card: fix use-after-free in graph_for_each_linkWen Yang
[ Upstream commit 1bcc1fd64e4dd903f4d868a9e053986e3b102713 ] After calling of_node_put() on the codec_ep and codec_port variables, they are still being used, which may result in use-after-free. We fix this issue by calling of_node_put() after the last usage. Fixes: fce9b90c1ab7 ("ASoC: audio-graph-card: cleanup DAI link loop method - step2") Signed-off-by: Wen Yang <wen.yang99@zte.com.cn> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: alsa-devel@alsa-project.org Cc: linux-kernel@vger.kernel.org Link: https://lore.kernel.org/r/1562229530-8121-1-git-send-email-wen.yang99@zte.com.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26ALSA: hda: Fix a headphone detection issue when using SOFRander Wang
[ Upstream commit 7c2b3629d09ddec810dc4c1d3a6657c32def8f71 ] To save power, the hda hdmi driver in ASoC invokes snd_hdac_ext_bus_link_put to disable CORB/RIRB buffers DMA if there is no user of bus and invokes snd_hdac_ext_bus_link_get to set up CORB/RIRB buffers when it is used. Unsolicited responses is disabled in snd_hdac_bus_stop_cmd_io called by snd_hdac_ext_bus_link_put , but it is not enabled in snd_hdac_bus_init_cmd_io called by snd_hdac_ext_bus_link_get. So for put-get sequence, Unsolicited responses is disabled and headphone can't be detected by hda codecs. Now unsolicited responses is only enabled in snd_hdac_bus_reset_link which resets controller. The function is only called for setup of controller. This patch enables Unsolicited responses after RIRB is initialized in snd_hdac_bus_init_cmd_io which works together with snd_hdac_bus_reset_link to set up controller. Tested legacy hda driver and SOF driver on intel whiskeylake. Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Rander Wang <rander.wang@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26ASoC: Intel: hdac_hdmi: Set ops to NULL on removeAmadeusz Sławiński
[ Upstream commit 0f6ff78540bd1b4df1e0f17806b0ce2e1dff0d78 ] When we unload Skylake driver we may end up calling hdac_component_master_unbind(), it uses acomp->audio_ops, which we set in hdmi_codec_probe(), so we need to set it to NULL in hdmi_codec_remove(), otherwise we will dereference no longer existing pointer. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26ALSA: hdac: Fix codec name after machine driver is unloaded and reloadedAmadeusz Sławiński
[ Upstream commit 8a5b0177a7f6099ff534a4d9ce72673af5c3cade ] Currently on each driver reload internal counter is being increased. It causes failure to enumerate driver devices, as they have hardcoded: .codec_name = "ehdaudio0D2", As there is currently no devices with multiple hda codecs and there is currently no established way to reliably differentiate, between them, always assign bus->idx = 0; This fixes a problem when we unload and reload machine driver idx gets incremented, so .codec_name would've needed to be set to "ehdaudio1D2" after first reload and so on. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Acked-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-17 17:06:48 +0000