| Age | Commit message (Collapse) | Author |
|---|
|
commit 9f8a7658bcafb2a7853f7a2eae8a94e87e6e695b upstream.
When a user timer instance is continued without the explicit start
beforehand, the system gets eventually zero-division error like:
divide error: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN
CPU: 1 PID: 27320 Comm: syz-executor Not tainted 4.8.0-rc3-next-20160825+ #8
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
task: ffff88003c9b2280 task.stack: ffff880027280000
RIP: 0010:[<ffffffff858e1a6c>] [< inline >] ktime_divns include/linux/ktime.h:195
RIP: 0010:[<ffffffff858e1a6c>] [<ffffffff858e1a6c>] snd_hrtimer_callback+0x1bc/0x3c0 sound/core/hrtimer.c:62
Call Trace:
<IRQ>
[< inline >] __run_hrtimer kernel/time/hrtimer.c:1238
[<ffffffff81504335>] __hrtimer_run_queues+0x325/0xe70 kernel/time/hrtimer.c:1302
[<ffffffff81506ceb>] hrtimer_interrupt+0x18b/0x420 kernel/time/hrtimer.c:1336
[<ffffffff8126d8df>] local_apic_timer_interrupt+0x6f/0xe0 arch/x86/kernel/apic/apic.c:933
[<ffffffff86e13056>] smp_apic_timer_interrupt+0x76/0xa0 arch/x86/kernel/apic/apic.c:957
[<ffffffff86e1210c>] apic_timer_interrupt+0x8c/0xa0 arch/x86/entry/entry_64.S:487
<EOI>
.....
Although a similar issue was spotted and a fix patch was merged in
commit [6b760bb2c63a: ALSA: timer: fix division by zero after
SNDRV_TIMER_IOCTL_CONTINUE], it seems covering only a part of
iceberg.
In this patch, we fix the issue a bit more drastically. Basically the
continue of an uninitialized timer is supposed to be a fresh start, so
we do it for user timers. For the direct snd_timer_continue() call,
there is no way to pass the initial tick value, so we kick out for the
uninitialized case.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 8ddc05638ee42b18ba4fe99b5fb647fa3ad20456 upstream.
I hit this with syzkaller:
kasan: CONFIG_KASAN_INLINE enabled
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 0 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #190
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
task: ffff88011278d600 task.stack: ffff8801120c0000
RIP: 0010:[<ffffffff82c8ba07>] [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100
RSP: 0018:ffff8801120c7a60 EFLAGS: 00010006
RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000007
RDX: 0000000000000009 RSI: 1ffff10023483091 RDI: 0000000000000048
RBP: ffff8801120c7a78 R08: ffff88011a5cf768 R09: ffff88011a5ba790
R10: 0000000000000002 R11: ffffed00234b9ef1 R12: ffff880114843980
R13: ffffffff84213c00 R14: ffff880114843ab0 R15: 0000000000000286
FS: 00007f72958f3700(0000) GS:ffff88011aa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000603001 CR3: 00000001126ab000 CR4: 00000000000006f0
Stack:
ffff880114843980 ffff880111eb2dc0 ffff880114843a34 ffff8801120c7ad0
ffffffff82c81ab1 0000000000000000 ffffffff842138e0 0000000100000000
ffff880111eb2dd0 ffff880111eb2dc0 0000000000000001 ffff880111eb2dc0
Call Trace:
[<ffffffff82c81ab1>] snd_timer_start1+0x331/0x670
[<ffffffff82c85bfd>] snd_timer_start+0x5d/0xa0
[<ffffffff82c8795e>] snd_timer_user_ioctl+0x88e/0x2830
[<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430
[<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
[<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90
[<ffffffff8132762f>] ? put_prev_entity+0x108f/0x21a0
[<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
[<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050
[<ffffffff813510af>] ? cpuacct_account_field+0x12f/0x1a0
[<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200
[<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0
[<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0
[<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190
[<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0
[<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0
[<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0
[<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050
[<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
[<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25
Code: c7 c7 c4 b9 c8 82 48 89 d9 4c 89 ee e8 63 88 7f fe e8 7e 46 7b fe 48 8d 7b 48 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 04 84 c0 7e 65 80 7b 48 00 74 0e e8 52 46
RIP [<ffffffff82c8ba07>] snd_hrtimer_start+0x77/0x100
RSP <ffff8801120c7a60>
---[ end trace 5955b08db7f2b029 ]---
This can happen if snd_hrtimer_open() fails to allocate memory and
returns an error, which is currently not checked by snd_timer_open():
ioctl(SNDRV_TIMER_IOCTL_SELECT)
- snd_timer_user_tselect()
- snd_timer_close()
- snd_hrtimer_close()
- (struct snd_timer *) t->private_data = NULL
- snd_timer_open()
- snd_hrtimer_open()
- kzalloc() fails; t->private_data is still NULL
ioctl(SNDRV_TIMER_IOCTL_START)
- snd_timer_user_start()
- snd_timer_start()
- snd_timer_start1()
- snd_hrtimer_start()
- t->private_data == NULL // boom
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b760bb2c63a9e322c0e4a0b5daf335ad93d5a33 upstream.
I got this:
divide error: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 1327 Comm: a.out Not tainted 4.8.0-rc2+ #189
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014
task: ffff8801120a9580 task.stack: ffff8801120b0000
RIP: 0010:[<ffffffff82c8bd9a>] [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0
RSP: 0018:ffff88011aa87da8 EFLAGS: 00010006
RAX: 0000000000004f76 RBX: ffff880112655e88 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff880112655ea0 RDI: 0000000000000001
RBP: ffff88011aa87e00 R08: ffff88013fff905c R09: ffff88013fff9048
R10: ffff88013fff9050 R11: 00000001050a7b8c R12: ffff880114778a00
R13: ffff880114778ab4 R14: ffff880114778b30 R15: 0000000000000000
FS: 00007f071647c700(0000) GS:ffff88011aa80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000603001 CR3: 0000000112021000 CR4: 00000000000006e0
Stack:
0000000000000000 ffff880114778ab8 ffff880112655ea0 0000000000004f76
ffff880112655ec8 ffff880112655e80 ffff880112655e88 ffff88011aa98fc0
00000000b97ccf2b dffffc0000000000 ffff88011aa98fc0 ffff88011aa87ef0
Call Trace:
<IRQ>
[<ffffffff813abce7>] __hrtimer_run_queues+0x347/0xa00
[<ffffffff82c8bbc0>] ? snd_hrtimer_close+0x130/0x130
[<ffffffff813ab9a0>] ? retrigger_next_event+0x1b0/0x1b0
[<ffffffff813ae1a6>] ? hrtimer_interrupt+0x136/0x4b0
[<ffffffff813ae220>] hrtimer_interrupt+0x1b0/0x4b0
[<ffffffff8120f91e>] local_apic_timer_interrupt+0x6e/0xf0
[<ffffffff81227ad3>] ? kvm_guest_apic_eoi_write+0x13/0xc0
[<ffffffff83c35086>] smp_apic_timer_interrupt+0x76/0xa0
[<ffffffff83c3416c>] apic_timer_interrupt+0x8c/0xa0
<EOI>
[<ffffffff83c3239c>] ? _raw_spin_unlock_irqrestore+0x2c/0x60
[<ffffffff82c8185d>] snd_timer_start1+0xdd/0x670
[<ffffffff82c87015>] snd_timer_continue+0x45/0x80
[<ffffffff82c88100>] snd_timer_user_ioctl+0x1030/0x2830
[<ffffffff8159f3a0>] ? __follow_pte.isra.49+0x430/0x430
[<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
[<ffffffff815a26fa>] ? do_wp_page+0x3aa/0x1c90
[<ffffffff815aa4f8>] ? handle_mm_fault+0xbc8/0x27f0
[<ffffffff815a9930>] ? __pmd_alloc+0x370/0x370
[<ffffffff82c870d0>] ? snd_timer_pause+0x80/0x80
[<ffffffff816b0733>] do_vfs_ioctl+0x193/0x1050
[<ffffffff816b05a0>] ? ioctl_preallocate+0x200/0x200
[<ffffffff81002f2f>] ? syscall_trace_enter+0x3cf/0xdb0
[<ffffffff815045ba>] ? __context_tracking_exit.part.4+0x9a/0x1e0
[<ffffffff81002b60>] ? exit_to_usermode_loop+0x190/0x190
[<ffffffff82001a97>] ? check_preemption_disabled+0x37/0x1e0
[<ffffffff81d93889>] ? security_file_ioctl+0x89/0xb0
[<ffffffff816b167f>] SyS_ioctl+0x8f/0xc0
[<ffffffff816b15f0>] ? do_vfs_ioctl+0x1050/0x1050
[<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
[<ffffffff83c32b2a>] entry_SYSCALL64_slow_path+0x25/0x25
Code: e8 fc 42 7b fe 8b 0d 06 8a 50 03 49 0f af cf 48 85 c9 0f 88 7c 01 00 00 48 89 4d a8 e8 e0 42 7b fe 48 8b 45 c0 48 8b 4d a8 48 99 <48> f7 f9 49 01 c7 e8 cb 42 7b fe 48 8b 55 d0 48 b8 00 00 00 00
RIP [<ffffffff82c8bd9a>] snd_hrtimer_callback+0x1da/0x3f0
RSP <ffff88011aa87da8>
---[ end trace 6aa380f756a21074 ]---
The problem happens when you call ioctl(SNDRV_TIMER_IOCTL_CONTINUE) on a
completely new/unused timer -- it will have ->sticks == 0, which causes a
divide by 0 in snd_hrtimer_callback().
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 11749e086b2766cccf6217a527ef5c5604ba069c upstream.
I got this with syzkaller:
==================================================================
BUG: KASAN: null-ptr-deref on address 0000000000000020
Read of size 32 by task syz-executor/22519
CPU: 1 PID: 22519 Comm: syz-executor Not tainted 4.8.0-rc2+ #169
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2
014
0000000000000001 ffff880111a17a00 ffffffff81f9f141 ffff880111a17a90
ffff880111a17c50 ffff880114584a58 ffff880114584a10 ffff880111a17a80
ffffffff8161fe3f ffff880100000000 ffff880118d74a48 ffff880118d74a68
Call Trace:
[<ffffffff81f9f141>] dump_stack+0x83/0xb2
[<ffffffff8161fe3f>] kasan_report_error+0x41f/0x4c0
[<ffffffff8161ff74>] kasan_report+0x34/0x40
[<ffffffff82c84b54>] ? snd_timer_user_read+0x554/0x790
[<ffffffff8161e79e>] check_memory_region+0x13e/0x1a0
[<ffffffff8161e9c1>] kasan_check_read+0x11/0x20
[<ffffffff82c84b54>] snd_timer_user_read+0x554/0x790
[<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0
[<ffffffff817d0831>] ? proc_fault_inject_write+0x1c1/0x250
[<ffffffff817d0670>] ? next_tgid+0x2a0/0x2a0
[<ffffffff8127c278>] ? do_group_exit+0x108/0x330
[<ffffffff8174653a>] ? fsnotify+0x72a/0xca0
[<ffffffff81674dfe>] __vfs_read+0x10e/0x550
[<ffffffff82c84600>] ? snd_timer_user_info_compat.isra.5+0x2b0/0x2b0
[<ffffffff81674cf0>] ? do_sendfile+0xc50/0xc50
[<ffffffff81745e10>] ? __fsnotify_update_child_dentry_flags+0x60/0x60
[<ffffffff8143fec6>] ? kcov_ioctl+0x56/0x190
[<ffffffff81e5ada2>] ? common_file_perm+0x2e2/0x380
[<ffffffff81746b0e>] ? __fsnotify_parent+0x5e/0x2b0
[<ffffffff81d93536>] ? security_file_permission+0x86/0x1e0
[<ffffffff816728f5>] ? rw_verify_area+0xe5/0x2b0
[<ffffffff81675355>] vfs_read+0x115/0x330
[<ffffffff81676371>] SyS_read+0xd1/0x1a0
[<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0
[<ffffffff82001c2c>] ? __this_cpu_preempt_check+0x1c/0x20
[<ffffffff8150455a>] ? __context_tracking_exit.part.4+0x3a/0x1e0
[<ffffffff816762a0>] ? vfs_write+0x4b0/0x4b0
[<ffffffff81005524>] do_syscall_64+0x1c4/0x4e0
[<ffffffff810052fc>] ? syscall_return_slowpath+0x16c/0x1d0
[<ffffffff83c3276a>] entry_SYSCALL64_slow_path+0x25/0x25
==================================================================
There are a couple of problems that I can see:
- ioctl(SNDRV_TIMER_IOCTL_SELECT), which potentially sets
tu->queue/tu->tqueue to NULL on memory allocation failure, so read()
would get a NULL pointer dereference like the above splat
- the same ioctl() can free tu->queue/to->tqueue which means read()
could potentially see (and dereference) the freed pointer
We can fix both by taking the ioctl_lock mutex when dereferencing
->queue/->tqueue, since that's always held over all the ioctl() code.
Just looking at the code I find it likely that there are more problems
here such as tu->qhead pointing outside the buffer if the size is
changed concurrently using SNDRV_TIMER_IOCTL_PARAMS.
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fd06c77eb9200b53d421da5fffe0dcd894b5d72a upstream.
The subwoofer on Inspiron 7559 was disabled originally.
Applying a pin fixup to node 0x1b can enable it and make it work.
Old pin: 0x411111f0
New pin: 0x90170151
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 311042d1b67d9a1856a8e1294e7729fb86f64014 upstream.
This patch enables headset microphone on some variants of
Dell Inspiron 5468. (Dell SSID 0x07ad)
BugLink: https://bugs.launchpad.net/bugs/1617900
Signed-off-by: Shrirang Bagul <shrirang.bagul@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 816f318b2364262a51024096da7ca3b84e78e3b5 upstream.
When a seq-virmidi driver is initialized, it registers a rawmidi
instance with its callback to create an associated seq kernel client.
Currently it's done throughly in rawmidi's register_mutex context.
Recently it was found that this may lead to a deadlock another rawmidi
device that is being attached with the sequencer is accessed, as both
open with the same register_mutex. This was actually triggered by
syzkaller, as Dmitry Vyukov reported:
======================================================
[ INFO: possible circular locking dependency detected ]
4.8.0-rc1+ #11 Not tainted
-------------------------------------------------------
syz-executor/7154 is trying to acquire lock:
(register_mutex#5){+.+.+.}, at: [<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341
but task is already holding lock:
(&grp->list_mutex){++++.+}, at: [<ffffffff850138bb>] check_and_subscribe_port+0x5b/0x5c0 sound/core/seq/seq_ports.c:495
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&grp->list_mutex){++++.+}:
[<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746
[<ffffffff863f6199>] down_read+0x49/0xc0 kernel/locking/rwsem.c:22
[< inline >] deliver_to_subscribers sound/core/seq/seq_clientmgr.c:681
[<ffffffff85005c5e>] snd_seq_deliver_event+0x35e/0x890 sound/core/seq/seq_clientmgr.c:822
[<ffffffff85006e96>] > snd_seq_kernel_client_dispatch+0x126/0x170 sound/core/seq/seq_clientmgr.c:2418
[<ffffffff85012c52>] snd_seq_system_broadcast+0xb2/0xf0 sound/core/seq/seq_system.c:101
[<ffffffff84fff70a>] snd_seq_create_kernel_client+0x24a/0x330 sound/core/seq/seq_clientmgr.c:2297
[< inline >] snd_virmidi_dev_attach_seq sound/core/seq/seq_virmidi.c:383
[<ffffffff8502d29f>] snd_virmidi_dev_register+0x29f/0x750 sound/core/seq/seq_virmidi.c:450
[<ffffffff84fd208c>] snd_rawmidi_dev_register+0x30c/0xd40 sound/core/rawmidi.c:1645
[<ffffffff84f816d3>] __snd_device_register.part.0+0x63/0xc0 sound/core/device.c:164
[< inline >] __snd_device_register sound/core/device.c:162
[<ffffffff84f8235d>] snd_device_register_all+0xad/0x110 sound/core/device.c:212
[<ffffffff84f7546f>] snd_card_register+0xef/0x6c0 sound/core/init.c:749
[<ffffffff85040b7f>] snd_virmidi_probe+0x3ef/0x590 sound/drivers/virmidi.c:123
[<ffffffff833ebf7b>] platform_drv_probe+0x8b/0x170 drivers/base/platform.c:564
......
-> #0 (register_mutex#5){+.+.+.}:
[< inline >] check_prev_add kernel/locking/lockdep.c:1829
[< inline >] check_prevs_add kernel/locking/lockdep.c:1939
[< inline >] validate_chain kernel/locking/lockdep.c:2266
[<ffffffff814791f4>] __lock_acquire+0x4d44/0x4d80 kernel/locking/lockdep.c:3335
[<ffffffff8147a3a8>] lock_acquire+0x208/0x430 kernel/locking/lockdep.c:3746
[< inline >] __mutex_lock_common kernel/locking/mutex.c:521
[<ffffffff863f0ef1>] mutex_lock_nested+0xb1/0xa20 kernel/locking/mutex.c:621
[<ffffffff84fd6d4b>] snd_rawmidi_kernel_open+0x4b/0x260 sound/core/rawmidi.c:341
[<ffffffff8502e7c7>] midisynth_subscribe+0xf7/0x350 sound/core/seq/seq_midi.c:188
[< inline >] subscribe_port sound/core/seq/seq_ports.c:427
[<ffffffff85013cc7>] check_and_subscribe_port+0x467/0x5c0 sound/core/seq/seq_ports.c:510
[<ffffffff85015da9>] snd_seq_port_connect+0x2c9/0x500 sound/core/seq/seq_ports.c:579
[<ffffffff850079b8>] snd_seq_ioctl_subscribe_port+0x1d8/0x2b0 sound/core/seq/seq_clientmgr.c:1480
[<ffffffff84ffe9e4>] snd_seq_do_ioctl+0x184/0x1e0 sound/core/seq/seq_clientmgr.c:2225
[<ffffffff84ffeae8>] snd_seq_kernel_client_ctl+0xa8/0x110 sound/core/seq/seq_clientmgr.c:2440
[<ffffffff85027664>] snd_seq_oss_midi_open+0x3b4/0x610 sound/core/seq/oss/seq_oss_midi.c:375
[<ffffffff85023d67>] snd_seq_oss_synth_setup_midi+0x107/0x4c0 sound/core/seq/oss/seq_oss_synth.c:281
[<ffffffff8501b0a8>] snd_seq_oss_open+0x748/0x8d0 sound/core/seq/oss/seq_oss_init.c:274
[<ffffffff85019d8a>] odev_open+0x6a/0x90 sound/core/seq/oss/seq_oss.c:138
[<ffffffff84f7040f>] soundcore_open+0x30f/0x640 sound/sound_core.c:639
......
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&grp->list_mutex);
lock(register_mutex#5);
lock(&grp->list_mutex);
lock(register_mutex#5);
*** DEADLOCK ***
======================================================
The fix is to simply move the registration parts in
snd_rawmidi_dev_register() to the outside of the register_mutex lock.
The lock is needed only to manage the linked list, and it's not
necessarily to cover the whole initialization process.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6b1ca4bcadf9ef077cc5f03c6822ba276ed14902 upstream.
In hwdep interface of fireworks driver, accessing to user space is in a
critical section with disabled local interrupt. Depending on architecture,
accessing to user space can cause page fault exception. Then local
processor stores machine status and handles the synchronous event. A
handler corresponding to the event can call task scheduler to wait for
preparing pages. In a case of usage of single core processor, the state to
disable local interrupt is worse because it don't handle usual interrupts
from hardware.
This commit fixes this bug, performing the accessing outside spinlock. This
commit also gives up counting the number of queued response messages to
simplify ring-buffer management.
Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Fixes: 555e8a8f7f14('ALSA: fireworks: Add command/response functionality into hwdep interface')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 04b2d9c9c319277ad4fbbb71855c256a9f4d5f98 upstream.
In hwdep interface of firewire-tascam driver, accessing to user space is
in a critical section with disabled local interrupt. Depending on
architecture, accessing to user space can cause page fault exception. Then
local processor stores machine status and handle the synchronous event. A
handler corresponding to the event can call task scheduler to wait for
preparing pages. In a case of usage of single core processor, the state to
disable local interrupt is worse because it doesn't handle usual interrupts
from hardware.
This commit fixes this bug, by performing the accessing outside spinlock.
Reported-by: Vaishali Thakkar <vaishali.thakkar@oracle.com>
Fixes: e5e0c3dd257b('ALSA: firewire-tascam: add hwdep interface')
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 83d9956b7e6b310c1062df7894257251c625b22e upstream.
Avoid getting sample rate on B850V3 CP2114 as it is unsupported and
causes noisy "current rate is different from the runtime rate" messages
when playback starts.
Signed-off-by: Ken Lin <ken.lin@advantech.com.tw>
Signed-off-by: Akshay Bhat <akshay.bhat@timesys.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3e103a65514c2947e53f3171b21255fbde8b60c6 upstream.
commit cbaadf0f90d6 ("ASoC: atmel_ssc_dai: refactor the startup and
shutdown") refactored code such that the SSC is reset on every
startup; this breaks duplex audio (e.g. first start audio playback,
then start record, causing the playback to stop/hang)
Fixes: cbaadf0f90d6 (ASoC: atmel_ssc_dai: refactor the startup and shutdown)
Signed-off-by: Christoph Huber <c.huber@bct-electronic.com>
Signed-off-by: Peter Meerwald-Stadler <p.meerwald@bct-electronic.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b027d11263836a0cd335520175257dcb99b43757 upstream.
The commit 02fc76f6a changed base of the sysfs attributes from device to card.
The "show" callbacks dereferenced wrong objects because of this.
Fixes: 02fc76f6a7db ('ALSA: line6: Create sysfs via snd_card_add_dev_attr()')
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit adc8a43a6d6688272ebffa81789fa857e603dec6 upstream.
Done, because line6_stream_stop() locks and calls line6_unlink_audio_urbs(),
which in turn invokes audio_out_callback(), which tries to lock 2nd time.
Fixes:
=============================================
[ INFO: possible recursive locking detected ]
4.4.15+ #15 Not tainted
---------------------------------------------
mplayer/3591 is trying to acquire lock:
(&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa27655>] audio_out_callback+0x70/0x110 [snd_usb_line6]
but task is already holding lock:
(&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&line6pcm->out.lock)->rlock);
lock(&(&line6pcm->out.lock)->rlock);
*** DEADLOCK ***
May be due to missing lock nesting notation
3 locks held by mplayer/3591:
#0: (snd_pcm_link_rwlock){.-.-..}, at: [<bf8d49a7>] snd_pcm_stream_lock+0x1e/0x40 [snd_pcm]
#1: (&(&substream->self_group.lock)->rlock){-.-...}, at: [<bf8d49af>] snd_pcm_stream_lock+0x26/0x40 [snd_pcm]
#2: (&(&line6pcm->out.lock)->rlock){-.-...}, at: [<bfa26aad>] line6_stream_stop+0x24/0x5c [snd_usb_line6]
stack backtrace:
CPU: 0 PID: 3591 Comm: mplayer Not tainted 4.4.15+ #15
Hardware name: Generic AM33XX (Flattened Device Tree)
[<c0015d85>] (unwind_backtrace) from [<c001253d>] (show_stack+0x11/0x14)
[<c001253d>] (show_stack) from [<c02f1bdf>] (dump_stack+0x8b/0xac)
[<c02f1bdf>] (dump_stack) from [<c0076f43>] (__lock_acquire+0xc8b/0x1780)
[<c0076f43>] (__lock_acquire) from [<c007810d>] (lock_acquire+0x99/0x1c0)
[<c007810d>] (lock_acquire) from [<c06171e7>] (_raw_spin_lock_irqsave+0x3f/0x4c)
[<c06171e7>] (_raw_spin_lock_irqsave) from [<bfa27655>] (audio_out_callback+0x70/0x110 [snd_usb_line6])
[<bfa27655>] (audio_out_callback [snd_usb_line6]) from [<c04294db>] (__usb_hcd_giveback_urb+0x53/0xd0)
[<c04294db>] (__usb_hcd_giveback_urb) from [<c046388d>] (musb_giveback+0x3d/0x98)
[<c046388d>] (musb_giveback) from [<c04647f5>] (musb_urb_dequeue+0x6d/0x114)
[<c04647f5>] (musb_urb_dequeue) from [<c042ac11>] (usb_hcd_unlink_urb+0x39/0x98)
[<c042ac11>] (usb_hcd_unlink_urb) from [<bfa26a87>] (line6_unlink_audio_urbs+0x6a/0x6c [snd_usb_line6])
[<bfa26a87>] (line6_unlink_audio_urbs [snd_usb_line6]) from [<bfa26acb>] (line6_stream_stop+0x42/0x5c [snd_usb_line6])
[<bfa26acb>] (line6_stream_stop [snd_usb_line6]) from [<bfa26fe7>] (snd_line6_trigger+0xb6/0xf4 [snd_usb_line6])
[<bfa26fe7>] (snd_line6_trigger [snd_usb_line6]) from [<bf8d47b7>] (snd_pcm_do_stop+0x36/0x38 [snd_pcm])
[<bf8d47b7>] (snd_pcm_do_stop [snd_pcm]) from [<bf8d462f>] (snd_pcm_action_single+0x22/0x40 [snd_pcm])
[<bf8d462f>] (snd_pcm_action_single [snd_pcm]) from [<bf8d46f9>] (snd_pcm_action+0xac/0xb0 [snd_pcm])
[<bf8d46f9>] (snd_pcm_action [snd_pcm]) from [<bf8d4b61>] (snd_pcm_drop+0x38/0x64 [snd_pcm])
[<bf8d4b61>] (snd_pcm_drop [snd_pcm]) from [<bf8d6233>] (snd_pcm_common_ioctl1+0x7fe/0xbe8 [snd_pcm])
[<bf8d6233>] (snd_pcm_common_ioctl1 [snd_pcm]) from [<bf8d6779>] (snd_pcm_playback_ioctl1+0x15c/0x51c [snd_pcm])
[<bf8d6779>] (snd_pcm_playback_ioctl1 [snd_pcm]) from [<bf8d6b59>] (snd_pcm_playback_ioctl+0x20/0x28 [snd_pcm])
[<bf8d6b59>] (snd_pcm_playback_ioctl [snd_pcm]) from [<c016714b>] (do_vfs_ioctl+0x3af/0x5c8)
Fixes: 63e20df1e5b2 ('ALSA: line6: Reorganize PCM stream handling')
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7e4379eae0e31994ea645db1d13006ea8e5ce539 upstream.
If there's an error, pcm is released in line6_pcm_acquire already.
Fixes: 247d95ee6dd2 ('ALSA: line6: Handle error from line6_pcm_acquire()')
Reviewed-by: Stefan Hajnoczi <stefanha@gmail.com>
Signed-off-by: Andrej Krutak <dev@andree.sk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a52ff34e5ec61749c62c6618b76a9d6dbecee450 upstream.
For SKL and later Intel chips, we control the power well per codec
basis via link_power callback since the commit [03b135cebc47: ALSA:
hda - remove dependency on i915 power well for SKL].
However, there are a few exceptional cases where the gfx registers are
accessed from the audio driver: namely the wakeup override bit
toggling at (both system and runtime) resume. This seems causing a
kernel warning when accessed during the power well down (and likely
resulting in the bogus register accesses).
This patch puts the proper power up / down sequence around the resume
code so that the wakeup bit is fiddled properly while the power is
up. (The other callback, sync_audio_rate, is used only in the PCM
callback, so it's guaranteed in the power-on.)
Also, by this proper power up/down, the instantaneous flip of wakeup
bit in the resume callback that was introduced by the commit
[033ea349a7cd: ALSA: hda - Fix Skylake codec timeout] becomes
superfluous, as snd_hdac_display_power() already does it. So we can
clean it up together.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=96214
Fixes: 03b135cebc47 ('ALSA: hda - remove dependency on i915 power well for SKL')
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 41f5e3bdbf706a9e98194bf0c4b62a875c02f170 upstream.
The ELP HD USB Camera (05a3:9420) needs this quirk for suppressing
the unsupported sample rate inquiry.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=98481
Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
(VF0610)
commit 7627e40c66b5547e12b6c5673646ceea84797a74 upstream.
VF0610 does not support reading the sample rate which leads to many
lines of "cannot get freq at ep 0x82". This patch adds the USB ID
(0x041E:4080) to snd_usb_get_sample_rate_quirk() list.
Signed-off-by: Piotr Karasinski <peter.karasinski@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 59ec4b57bcaede46546d54d037a21004b9aa5cef upstream.
One of the machines has ALC255 on it, another one has ALC298 on it.
On the machine with the codec ALC298, it also has the speaker volume
problem, so we add the fixup chained to ALC298_FIXUP_SPK_VOLUME rather
than adding a group of pin definition in the pin quirk table, since
the speak volume problem does not happen on other machines yet.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fd48331f9b71d2add941adaee3619f5b8527182d upstream.
This commit fixes garbled audio on Bonaire HDMI
Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit dd9aa335c88003d131ac874e7f6809902de0b847 upstream.
We have a Dell AIO on which we can't adjust its speaker's volume.
The problem is it is connected to a Audio Output node without Amp-out
capability. To fix it, we change it to be connnected to a node with
Amp-out capability.
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 33baefe5e72f17a6df378e48196cd8cada11deec upstream.
krealloc() doesn't work always properly with __GFP_ZERO flag as
expected. For clearing the reallocated area, we need to clear
explicitly instead.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
snd_usb_{set_interface,ctl_msg}_quirk checks chip->usb_id to need
calling a quirks code. But existed code path that not calling
dev_set_drvdata in usb_audio_probe.
Fixes: 79289e24194a ("ALSA: usb-audio: Refer to chip->usb_id for quirks and MIDI creation")
Signed-off-by: Kazuki Oikawa <k@oikw.org>
Cc: <stable@vger.kernel.org> # v4.6+
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Tested-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This allows the device to correctly show up as ATI HDMI
rather than a generic one and allows the driver to use
the available caps.
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
register_vga_switcheroo() sets the PM ops from the hda structure which
is freed later in azx_free. Make sure that these ops are cleared.
Caught by KASAN, initially noticed due to a general protection fault.
Fixes: 246efa4a072f ("snd/hda: add runtime suspend/resume on optimus support (v4)")
Signed-off-by: Peter Wu <peter@lekensteyn.nl>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The chmap ctls assigned to PCM streams are freed in the PCM disconnect
callback. However, since the disconnect callback isn't called when
the card gets freed before registering, the chmap ctls may still be
left assigned. They are eventually freed together with other ctls,
but it may cause an Oops at pcm_chmap_ctl_private_free(), as the
function refers to the assigned PCM stream, while the PCM objects have
been already freed beforehand.
The fix is to free the chmap ctls also at PCM free callback, not only
at PCM disconnect.
Reported-by: Laxminath Kasam <b_lkasam@codeaurora.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
snd_ctl_remove() has a notification for the removal event. It's
superfluous when done during the device got disconnected. Although
the notification itself is mostly harmless, it may potentially be
harmful, and should be suppressed. Actually some components PCM may
free ctl elements during the disconnect or free callbacks, thus it's
no theoretical issue.
This patch adds the check of card->shutdown flag for avoiding
unnecessary notifications after (or during) the disconnect.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We have some Dell laptops which can't detect headset mic, the machines
use the codec ALC225, they have some new pin configuration values,
after adding them in the alc225 pin quirk table, they work well.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This solves the issue that a headphone is not working on the docking
unit.
Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The user timer tu->qused counter may go to a negative value when
multiple concurrent reads are performed since both the check and the
decrement of tu->qused are done in two individual locked contexts.
This results in bogus read outs, and the endless loop in the
user-space side.
The fix is to move the decrement of the tu->qused counter into the
same spinlock context as the zero-check of the counter.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.7
A small clutch of hardware specific fixes for various ASoC devices, all
small individually and important if you have that device but not
otherwise.
|
|
'asoc/fix/wm8940' into asoc-linus
|
|
'asoc/fix/cx20442', 'asoc/fix/davinci', 'asoc/fix/fsl-ssi' and 'asoc/fix/hdmi' into asoc-linus
|
|
|
|
|
|
The default value of reg-2f in codec rt5650 is 0x5002, not 0x1002.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The i.MX51 datasheet says:
Chapter 56.1.2.4 I2S Mode
...
When I2S modes are entered (I2S master (01) or I2S slave (10)),
the following settings are recommended:
...
- TX Frame Rate should be 2 i.e. (STCCR[12:8] = 1)
- RX Frame Rate should be 2 i.e. (SRCCR[12:8] = 1)
Chapter 56.3.3.12 SSI Transmit and Receive Clock Control Registers (STCCR & SRCCR)
...
Bits 12-8 DC4-DC0
Frame Rate Divider Control. These bits are used to control the divide ratio
for the programmable frame rate dividers. The divide ratio works on the word
clock. In Normal mode, this ratio determines the word transfer rate.
In Network mode, this ratio sets the number of words per frame. The divide
ratio ranges from 1 to 32 in Normal mode and from 2 to 32 in Network mode.
In Normal mode, a divide ratio of 1 (DC=00000) provides continuous periodic
data word transfer. A bit-length frame sync must be used in this case.
Function fsl_ssi_hw_params() setup Normal mode for MONO output,
so with DC=0, SSI enters to continuous periodic data word transfer.
To fix this, setup DC for any I2S mode.
Patch has tested on custom board based on Digi CCMX-51 module (i.MX51).
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
vortex_wtdma_bufshift() function does calculate the page index
wrongly, first masking then shift, which always results in zero.
The proper computation is to first shift, then mask.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Kabylake-H shows up as PCI ID 0xa2f0. We missed adding this
earlier with other KBL IDs.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
'commpage_bak' is allocated with 'sizeof(struct echoaudio)' bytes.
We then copy 'sizeof(struct comm_page)' bytes in it.
On my system, smatch complains because one is 2960 and the other is 3072.
This would result in memory corruption or a oops.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
to execute
Now we correctly error an attempt to execute an unsupported operation.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
UBSAN reports the following warning from accessing path->path[-1]
in set_path_power():
[ 16.078040] ================================================================================
[ 16.078124] UBSAN: Undefined behaviour in sound/pci/hda/hda_generic.c:3981:17
[ 16.078198] index -1 is out of range for type 'hda_nid_t [10]'
[ 16.078270] CPU: 2 PID: 1738 Comm: modprobe Not tainted 4.7.0-rc1-wt+ #47
[ 16.078274] Hardware name: LENOVO 3443CTO/3443CTO, BIOS G6ET23WW (1.02 ) 08/14/2012
[ 16.078278] ffff8800cb246000 ffff8800cb3638b8 ffffffff815c4fe3 0000000000000032
[ 16.078286] ffff8800cb3638e0 ffffffffffffffff ffff8800cb3638d0 ffffffff8162443d
[ 16.078294] ffffffffa0894200 ffff8800cb363920 ffffffff81624af7 0000000000000292
[ 16.078302] Call Trace:
[ 16.078311] [<ffffffff815c4fe3>] dump_stack+0x86/0xd3
[ 16.078317] [<ffffffff8162443d>] ubsan_epilogue+0xd/0x40
[ 16.078324] [<ffffffff81624af7>] __ubsan_handle_out_of_bounds+0x67/0x70
[ 16.078335] [<ffffffffa087665f>] set_path_power+0x1bf/0x230 [snd_hda_codec_generic]
[ 16.078344] [<ffffffffa087880d>] add_pin_power_ctls+0x8d/0xc0 [snd_hda_codec_generic]
[ 16.078352] [<ffffffffa087f190>] ? pin_power_down_callback+0x20/0x20 [snd_hda_codec_generic]
[ 16.078360] [<ffffffffa0878947>] add_all_pin_power_ctls+0x107/0x150 [snd_hda_codec_generic]
[ 16.078370] [<ffffffffa08842b3>] snd_hda_gen_parse_auto_config+0x2d73/0x49e0 [snd_hda_codec_generic]
[ 16.078376] [<ffffffff81173360>] ? trace_hardirqs_on_caller+0x1b0/0x2c0
[ 16.078390] [<ffffffffa089df27>] alc_parse_auto_config+0x147/0x310 [snd_hda_codec_realtek]
[ 16.078402] [<ffffffffa08a332a>] patch_alc269+0x23a/0x560 [snd_hda_codec_realtek]
[ 16.078417] [<ffffffffa0838644>] hda_codec_driver_probe+0xa4/0x1a0 [snd_hda_codec]
[ 16.078424] [<ffffffff817bbac1>] driver_probe_device+0x101/0x380
[ 16.078430] [<ffffffff817bbdf9>] __driver_attach+0xb9/0x100
[ 16.078438] [<ffffffff817bbd40>] ? driver_probe_device+0x380/0x380
[ 16.078444] [<ffffffff817b8d20>] bus_for_each_dev+0x70/0xc0
[ 16.078449] [<ffffffff817bb087>] driver_attach+0x27/0x50
[ 16.078454] [<ffffffff817ba956>] bus_add_driver+0x166/0x2c0
[ 16.078460] [<ffffffffa0369000>] ? 0xffffffffa0369000
[ 16.078465] [<ffffffff817bd13d>] driver_register+0x7d/0x130
[ 16.078477] [<ffffffffa083816f>] __hda_codec_driver_register+0x6f/0x90 [snd_hda_codec]
[ 16.078488] [<ffffffffa036901e>] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek]
[ 16.078493] [<ffffffff8100215e>] do_one_initcall+0x4e/0x1d0
[ 16.078499] [<ffffffff8119f54d>] ? rcu_read_lock_sched_held+0x6d/0x80
[ 16.078504] [<ffffffff813701b1>] ? kmem_cache_alloc_trace+0x391/0x560
[ 16.078510] [<ffffffff812bb314>] ? do_init_module+0x28/0x273
[ 16.078515] [<ffffffff812bb387>] do_init_module+0x9b/0x273
[ 16.078522] [<ffffffff811e3782>] load_module+0x20b2/0x3410
[ 16.078527] [<ffffffff811df140>] ? m_show+0x210/0x210
[ 16.078533] [<ffffffff813b2b26>] ? kernel_read+0x66/0xe0
[ 16.078541] [<ffffffff811e4cfa>] SYSC_finit_module+0xba/0xc0
[ 16.078547] [<ffffffff811e4d1e>] SyS_finit_module+0xe/0x10
[ 16.078552] [<ffffffff81a860fc>] entry_SYSCALL_64_fastpath+0x1f/0xbd
[ 16.078556] ================================================================================
Fix by checking path->depth before use.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
syzkaller fuzzer spotted a potential use-after-free case in snd-dummy
driver when hrtimer is used as backend:
> ==================================================================
> BUG: KASAN: use-after-free in rb_erase+0x1b17/0x2010 at addr ffff88005e5b6f68
> Read of size 8 by task syz-executor/8984
> =============================================================================
> BUG kmalloc-192 (Not tainted): kasan: bad access detected
> -----------------------------------------------------------------------------
>
> Disabling lock debugging due to kernel taint
> INFO: Allocated in 0xbbbbbbbbbbbbbbbb age=18446705582212484632
> ....
> [< none >] dummy_hrtimer_create+0x49/0x1a0 sound/drivers/dummy.c:464
> ....
> INFO: Freed in 0xfffd8e09 age=18446705496313138713 cpu=2164287125 pid=-1
> [< none >] dummy_hrtimer_free+0x68/0x80 sound/drivers/dummy.c:481
> ....
> Call Trace:
> [<ffffffff8179e59e>] __asan_report_load8_noabort+0x3e/0x40 mm/kasan/report.c:333
> [< inline >] rb_set_parent include/linux/rbtree_augmented.h:111
> [< inline >] __rb_erase_augmented include/linux/rbtree_augmented.h:218
> [<ffffffff82ca5787>] rb_erase+0x1b17/0x2010 lib/rbtree.c:427
> [<ffffffff82cb02e8>] timerqueue_del+0x78/0x170 lib/timerqueue.c:86
> [<ffffffff814d0c80>] __remove_hrtimer+0x90/0x220 kernel/time/hrtimer.c:903
> [< inline >] remove_hrtimer kernel/time/hrtimer.c:945
> [<ffffffff814d23da>] hrtimer_try_to_cancel+0x22a/0x570 kernel/time/hrtimer.c:1046
> [<ffffffff814d2742>] hrtimer_cancel+0x22/0x40 kernel/time/hrtimer.c:1066
> [<ffffffff85420531>] dummy_hrtimer_stop+0x91/0xb0 sound/drivers/dummy.c:417
> [<ffffffff854228bf>] dummy_pcm_trigger+0x17f/0x1e0 sound/drivers/dummy.c:507
> [<ffffffff85392170>] snd_pcm_do_stop+0x160/0x1b0 sound/core/pcm_native.c:1106
> [<ffffffff85391b26>] snd_pcm_action_single+0x76/0x120 sound/core/pcm_native.c:956
> [<ffffffff85391e01>] snd_pcm_action+0x231/0x290 sound/core/pcm_native.c:974
> [< inline >] snd_pcm_stop sound/core/pcm_native.c:1139
> [<ffffffff8539754d>] snd_pcm_drop+0x12d/0x1d0 sound/core/pcm_native.c:1784
> [<ffffffff8539d3be>] snd_pcm_common_ioctl1+0xfae/0x2150 sound/core/pcm_native.c:2805
> [<ffffffff8539ee91>] snd_pcm_capture_ioctl1+0x2a1/0x5e0 sound/core/pcm_native.c:2976
> [<ffffffff8539f2ec>] snd_pcm_kernel_ioctl+0x11c/0x160 sound/core/pcm_native.c:3020
> [<ffffffff853d9a44>] snd_pcm_oss_sync+0x3a4/0xa30 sound/core/oss/pcm_oss.c:1693
> [<ffffffff853da27d>] snd_pcm_oss_release+0x1ad/0x280 sound/core/oss/pcm_oss.c:2483
> .....
A workaround is to call hrtimer_cancel() in dummy_hrtimer_sync() which
is called certainly before other blocking ops.
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
See: https://bugzilla.redhat.com/show_bug.cgi?id=1349539
See: https://bugzilla.kernel.org/show_bug.cgi?id=120961
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The new Dell laptop with codec 3246 can't detect headset mic when
headset was inserted on the machine. So adding pin configurations
into quirk table makes headset mic work correctly.
Codec: Realtek ALC3246
Vendor Id: 0x10ec0256
Subsystem Id: 0x10280781
Signed-off-by: Woodrow Shen <woodrow.shen@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The readl/writel are not being passed __iomem annotated
variables, so fix the following sparse warnings by adding
__iomem in:
sound/pci/hda/hda_tegra.c:120:9: warning: incorrect type in argument 2 (different address spaces)
sound/pci/hda/hda_tegra.c:120:9: expected void volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:120:9: got unsigned int [usertype] *addr
sound/pci/hda/hda_tegra.c:125:16: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:125:16: expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:125:16: got unsigned int [usertype] *addr
sound/pci/hda/hda_tegra.c:134:13: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:134:13: expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:134:13: got void *dword_addr
sound/pci/hda/hda_tegra.c:137:9: warning: incorrect type in argument 2 (different address spaces)
sound/pci/hda/hda_tegra.c:137:9: expected void volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:137:9: got void *dword_addr
sound/pci/hda/hda_tegra.c:146:13: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:146:13: expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:146:13: got void *dword_addr
sound/pci/hda/hda_tegra.c:156:13: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:156:13: expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:156:13: got void *dword_addr
sound/pci/hda/hda_tegra.c:159:9: warning: incorrect type in argument 2 (different address spaces)
sound/pci/hda/hda_tegra.c:159:9: expected void volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:159:9: got void *dword_addr
sound/pci/hda/hda_tegra.c:168:13: warning: incorrect type in argument 1 (different address spaces)
sound/pci/hda/hda_tegra.c:168:13: expected void const volatile [noderef] <asn:2>*addr
sound/pci/hda/hda_tegra.c:168:13: got void *dword_addr
sound/pci/hda/hda_tegra.c:173:23: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
sound/pci/hda/hda_tegra.c:173:23: expected void ( *reg_writel )( ... )
sound/pci/hda/hda_tegra.c:173:23: got void ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:174:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces))
sound/pci/hda/hda_tegra.c:174:22: expected unsigned int ( *reg_readl )( ... )
sound/pci/hda/hda_tegra.c:174:22: got unsigned int ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:175:23: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
sound/pci/hda/hda_tegra.c:175:23: expected void ( *reg_writew )( ... )
sound/pci/hda/hda_tegra.c:175:23: got void ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:176:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces))
sound/pci/hda/hda_tegra.c:176:22: expected unsigned short ( *reg_readw )( ... )
sound/pci/hda/hda_tegra.c:176:22: got unsigned short ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:177:23: warning: incorrect type in initializer (incompatible argument 2 (different address spaces))
sound/pci/hda/hda_tegra.c:177:23: expected void ( *reg_writeb )( ... )
sound/pci/hda/hda_tegra.c:177:23: got void ( static [toplevel] *<noident> )( ... )
sound/pci/hda/hda_tegra.c:178:22: warning: incorrect type in initializer (incompatible argument 1 (different address spaces))
sound/pci/hda/hda_tegra.c:178:22: expected unsigned char ( *reg_readb )( ... )
sound/pci/hda/hda_tegra.c:178:22: got unsigned char ( static [toplevel] *<noident> )( ... )
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Call path:
1) snd_hdac_power_up_pm()
2) snd_hdac_power_up()
3) pm_runtime_get_sync()
4) __pm_runtime_resume()
5) rpm_resume()
The rpm_resume() returns 1 when the device is already active.
Because the return value is unmodified, the hdac regmap read/write
functions should allow this value for the retry I/O operation, too.
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Commit 79901317ce80 ("n_tty: Don't flush buffer when closing ldisc"),
introduced in v3.10, revealed a bug in the cx20442 codec driver
which has never been setting tty->receive_room on line discipline
open as it should from the beginning. Fix it.
Created and tested on Amstrad Delta against Linux-4.7-rc3
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
During system resume:
kernel BUG at drivers/base/regmap/regcache.c:347!
...
PC is at regcache_sync+0x1c/0x128
LR is at ak4613_resume+0x28/0x34
The ak4613 driver is using a regmap cache sync to restore the
configuration of the chip on resume but does not actually define a
register cache which means that the resume is never going to work and we
trigger asserts in regmap. Fix this by enabling caching.
Based on commit d3030d11961a8c10 ("ASoC: ak4642: Enable cache usage to
fix crashes on resume") by Mark Brown <broonie@kernel.org>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The wm8940 driver is using a regmap cache sync to restore the
configuration of the chip when switching from OFF to STANDBY, but does
not actually define a register cache which means that the restore is
never going to work and we trigger asserts in regmap. Fix this by
enabling caching.
Based on commit d3030d11961a8c10 ("ASoC: ak4642: Enable cache usage to
fix crashes on resume") by Mark Brown <broonie@kernel.org>.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The module list was not initialized for Broxton DSP code, so
initialize it.
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
Takashi Iwai
Vegard Nossum
Kai-Heng Feng
Shrirang Bagul
Takashi Sakamoto
Ken Lin
Christoph Huber
Andrej Krutak
Vittorio Gambaletta (VittGam)
Piotr Karasinski
Hui Wang
Maruthi Srinivas Bayyavarapu
Kazuki Oikawa
Awais Belal
Peter Wu
Torsten Hilbrich
Mark Brown
Bard Liao
Alexander Shiyan
Vinod Koul
Christophe JAILLET
Alan Cox
Bob Copeland
Jaroslav Kysela
Woodrow Shen
Ben Dooks
Janusz Krzysztofik
Geert Uytterhoeven