Age | Commit message (Collapse) | Author |
|
commit 0700d3d117a7f110ddddbd83873e13652f69c54b upstream.
Fixed Dell AIO speaker noise.
spec->gen.auto_mute_via_amp = 1, this option was solved speaker white
noise at boot.
codec->power_save_node = 0, this option was solved speaker noise at
resume back.
Fixes: 9226665159f0 ("ALSA: hda/realtek - Fix Dell AIO LineOut issue")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 0a29c57b76624723b6b00c027e0e992d130ace49 upstream.
Add two Dell platform for headset mode.
[ Note: this is a further correction / addition of the previous
pin-based quirks for Dell machines; another entry for ALC236 with
the d-mic pin 0x12 and an entry for ALC295 -- tiwai ]
Fixes: b26e36b7ef36 ("ALSA: hda/realtek - add two more pin configuration sets to quirk table")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit c97617a81a7616d49bc3700959e08c6c6f447093 upstream.
A call of pci_iounmap() call without CONFIG_PCI leads to a build error
on some architectures. We tried to address this and add a check of
IS_ENABLED(CONFIG_PCI), but this still doesn't seem enough for sh.
Ideally we should fix it globally, it's really a corner case, so let's
paper over it with a simpler ifdef.
Fixes: 1e73359a24fa ("ALSA: hda/ca0132 - make pci_iounmap() call conditional")
Reported-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 8c2f870890fd28e023b0fcf49dcee333f2c8bad7 upstream.
The ALSA proc helper manages the child nodes in a linked list, but its
addition and deletion is done without any lock. This leads to a
corruption if they are operated concurrently. Usually this isn't a
problem because the proc entries are added sequentially in the driver
probe procedure itself. But the card registrations are done often
asynchronously, and the crash could be actually reproduced with
syzkaller.
This patch papers over it by protecting the link addition and deletion
with the parent's mutex. There is "access" mutex that is used for the
file access, and this can be reused for this purpose as well.
Reported-by: syzbot+48df349490c36f9f54ab@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 2a3f7221acddfe1caa9ff09b3a8158c39b2fdeac upstream.
There is a small race window in the card disconnection code that
allows the registration of another card with the very same card id.
This leads to a warning in procfs creation as caught by syzkaller.
The problem is that we delete snd_cards and snd_cards_lock entries at
the very beginning of the disconnection procedure. This makes the
slot available to be assigned for another card object while the
disconnection procedure is being processed. Then it becomes possible
to issue a procfs registration with the existing file name although we
check the conflict beforehand.
The fix is simply to move the snd_cards and snd_cards_lock clearances
at the end of the disconnection procedure. The references to these
entries are merely either from the global proc files like
/proc/asound/cards or from the card registration / disconnection, so
it should be fine to shift at the very end.
Reported-by: syzbot+48df349490c36f9f54ab@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit b26e36b7ef36a8a3a147b1609b2505f8a4ecf511 upstream.
We have two Dell laptops which have the codec 10ec0236 and 10ec0256
respectively, the headset mic on them can't work, need to apply the
quirk of ALC255_FIXUP_DELL1_MIC_NO_PRESENCE. So adding their pin
configurations in the pin quirk table.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 8ac51bbc4cfec4ef08b03bef24b31e2d50ef8b37 upstream.
This patch solves bug 200501 'Only 2 of 4 speakers playing sound.'
It enables the front speakers on Huawei Matebook X Pro laptops.
These laptops come with Dolby Atmos sound system and these pins
configuration enables the front speakers.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200501
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Ayman Bagabas <ayman.bagabas@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit ae7d1247d8673ebfd686b17e759d4be391165368 upstream.
In functions snd_soc_get_volsw_sx() or snd_soc_put_volsw_sx(),
if the result of (min + max) is negative, then fls() returns
signed integer with value as 32. This leads to signed integer
overflow as complete operation is considered as signed integer.
UBSAN: Undefined behaviour in sound/soc/soc-ops.c:382:50
signed integer overflow:
-2147483648 - 1 cannot be represented in type 'int'
Call trace:
[<ffffff852f746fe4>] __dump_stack lib/dump_stack.c:15 [inline]
[<ffffff852f746fe4>] dump_stack+0xec/0x158 lib/dump_stack.c:51
[<ffffff852f7b5f3c>] ubsan_epilogue+0x18/0x50 lib/ubsan.c:164
[<ffffff852f7b6840>] handle_overflow+0xf8/0x130 lib/ubsan.c:195
[<ffffff852f7b68f0>] __ubsan_handle_sub_overflow+0x34/0x44 lib/ubsan.c:211
[<ffffff85307971a0>] snd_soc_get_volsw_sx+0x1a8/0x1f8 sound/soc/soc-ops.c:382
Typecast the operation to unsigned int to fix the issue.
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit b4748e7ab731e436cf5db4786358ada5dd2db6dd upstream.
The function snd_opl3_drum_switch declaration in the header file
has the order of the two arguments on_off and vel swapped when
compared to the definition arguments of vel and on_off. Fix this
by swapping them around to match the definition.
This error predates the git history, so no idea when this error
was introduced.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit dcd0feac9bab901d5739de51b3f69840851f8919 upstream.
In case request_region fails, the fix returns an error code to
avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 6ade657d6125ec3ec07f95fa51e28138aef6208f upstream.
In case ioremap_nocache fails, the fix releases chip and returns
an error code upstream to avoid NULL pointer dereference.
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 0ff4e8c61b794a4bf6c854ab071a1abaaa80f358 upstream.
There is very low possibility ( < 0.1% ) that channel swap happened
in beginning when multi output/input pin is enabled. The issue is
that hardware can't send data to correct pin in the beginning with
the normal enable flow.
This is hardware issue, but there is no errata, the workaround flow
is that: Each time playback/recording, firstly clear the xSMA/xSMB,
then enable TE/RE, then enable xSMB and xSMA (xSMB must be enabled
before xSMA). Which is to use the xSMA as the trigger start register,
previously the xCR_TE or xCR_RE is the bit for starting.
Fixes commit 43d24e76b698 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
Cc: <stable@vger.kernel.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 8f71370f4b02730e8c27faf460af7a3586e24e1f upstream.
If codec registration fails after the ASoC Intel SST driver has been probed,
the kernel will Oops and crash at suspend/resume.
general protection fault: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 2811 Comm: cat Tainted: G W 4.19.30 #15
Hardware name: GOOGLE Clapper, BIOS Google_Clapper.5216.199.7 08/22/2014
RIP: 0010:snd_soc_suspend+0x5a/0xd21
Code: 03 80 3c 10 00 49 89 d7 74 0b 48 89 df e8 71 72 c4 fe 4c 89
fa 48 8b 03 48 89 45 d0 48 8d 98 a0 01 00 00 48 89 d8 48 c1 e8 03
<8a> 04 10 84 c0 0f 85 85 0c 00 00 80 3b 00 0f 84 6b 0c 00 00 48 8b
RSP: 0018:ffff888035407750 EFLAGS: 00010202
RAX: 0000000000000034 RBX: 00000000000001a0 RCX: 0000000000000000
RDX: dffffc0000000000 RSI: 0000000000000008 RDI: ffff88805c417098
RBP: ffff8880354077b0 R08: dffffc0000000000 R09: ffffed100b975718
R10: 0000000000000001 R11: ffffffff949ea4a3 R12: 1ffff1100b975746
R13: dffffc0000000000 R14: ffff88805cba4588 R15: dffffc0000000000
FS: 0000794a78e91b80(0000) GS:ffff888068d00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007bd5283ccf58 CR3: 000000004b7aa000 CR4: 00000000001006e0
Call Trace:
? dpm_complete+0x67b/0x67b
? i915_gem_suspend+0x14d/0x1ad
sst_soc_prepare+0x91/0x1dd
? sst_be_hw_params+0x7e/0x7e
dpm_prepare+0x39a/0x88b
dpm_suspend_start+0x13/0x9d
suspend_devices_and_enter+0x18f/0xbd7
? arch_suspend_enable_irqs+0x11/0x11
? printk+0xd9/0x12d
? lock_release+0x95f/0x95f
? log_buf_vmcoreinfo_setup+0x131/0x131
? rcu_read_lock_sched_held+0x140/0x22a
? __bpf_trace_rcu_utilization+0xa/0xa
? __pm_pr_dbg+0x186/0x190
? pm_notifier_call_chain+0x39/0x39
? suspend_test+0x9d/0x9d
pm_suspend+0x2f4/0x728
? trace_suspend_resume+0x3da/0x3da
? lock_release+0x95f/0x95f
? kernfs_fop_write+0x19f/0x32d
state_store+0xd8/0x147
? sysfs_kf_read+0x155/0x155
kernfs_fop_write+0x23e/0x32d
__vfs_write+0x108/0x608
? vfs_read+0x2e9/0x2e9
? rcu_read_lock_sched_held+0x140/0x22a
? __bpf_trace_rcu_utilization+0xa/0xa
? debug_smp_processor_id+0x10/0x10
? selinux_file_permission+0x1c5/0x3c8
? rcu_sync_lockdep_assert+0x6a/0xad
? __sb_start_write+0x129/0x2ac
vfs_write+0x1aa/0x434
ksys_write+0xfe/0x1be
? __ia32_sys_read+0x82/0x82
do_syscall_64+0xcd/0x120
entry_SYSCALL_64_after_hwframe+0x49/0xbe
In the observed situation, the problem is seen because the codec driver
failed to probe due to a hardware problem.
max98090 i2c-193C9890:00: Failed to read device revision: -1
max98090 i2c-193C9890:00: ASoC: failed to probe component -1
cht-bsw-max98090 cht-bsw-max98090: ASoC: failed to instantiate card -1
cht-bsw-max98090 cht-bsw-max98090: snd_soc_register_card failed -1
cht-bsw-max98090: probe of cht-bsw-max98090 failed with error -1
The problem is similar to the problem solved with commit 2fc995a87f2e
("ASoC: intel: Fix crash at suspend/resume without card registration"),
but codec registration fails at a later point. At that time, the pointer
checked with the above mentioned commit is already set, but it is not
cleared if the device is subsequently removed. Adding a remove function
to clear the pointer fixes the problem.
Cc: stable@vger.kernel.org
Cc: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Cc: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit cae30527901d9590db0e12ace994c1d58bea87fd upstream.
Recently we set CONFIG_SND_HDA_POWER_SAVE_DEFAULT to 1 when
configuring the kernel, then two machines were reported to have noise
after installing the new kernel. Put them in the blacklist, the
noise disappears.
https://bugs.launchpad.net/bugs/1821663
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 80690a276f444a68a332136d98bfea1c338bc263 upstream.
This adds a SND_PCI_QUIRK(...) line for the Tuxedo XC 1509.
The Tuxedo XC 1509 and the System76 oryp5 are the same barebone
notebooks manufactured by Clevo. To name the fixups both use after the
actual underlying hardware, this patch also changes System76_orpy5
to clevo_pb51ed in 2 enum symbols and one function name,
matching the other pci_quirk entries which are also named after the
device ODM.
Fixes: 7f665b1c3283 ("ALSA: hda/realtek - Headset microphone and internal speaker support for System76 oryp5")
Signed-off-by: Richard Sailer <rs@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit ea5c7eba216e832906e594799b8670f1954a588c upstream.
The Acer TravelMate B114-21 laptop cannot detect and record sound from
headset MIC. This patch adds the ALC233_FIXUP_ACER_HEADSET_MIC HDA verb
quirk chained with ALC233_FIXUP_ASUS_MIC_NO_PRESENCE pin quirk to fix
this issue.
[ fixed the missing brace and reordered the entry -- tiwai ]
Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Reviewed-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 212ac181c158c09038c474ba68068be49caecebb upstream.
When ioctl calls are made with non-null-terminated userspace strings,
strlcpy causes an OOB-read from within strlen. Fix by changing to use
strscpy instead.
Signed-off-by: Zubin Mithra <zsm@chromium.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit b2e9e1c8810ee05c95f4d55800b8afae70ab01b4 upstream.
Duende Classic was produced by Solid State Logic in 2006, as a
first model of Duende DSP series. The following model, Duende Mini
was produced in 2008. They are designed to receive isochronous
packets for PCM frames via IEEE 1394 bus, perform signal processing by
downloaded program, then transfer isochronous packets for converted
PCM frames.
These two models includes the same embedded board, consists of several
ICs below:
- Texus Instruments Inc, TSB41AB3 for physical layer of IEEE 1394 bus
- WaveFront semiconductor, DICE II STD ASIC for link/protocol layer
- Altera MAX 3000A CPLD for programs
- Analog devices, SHARC ADSP-21363 for signal processing (4 chips)
This commit adds support for the two models to ALSA dice driver. Like
support for the other devices, packet streaming is just available.
Userspace applications should be developed if full features became
available; e.g. program uploader and parameter controller.
$ ./hinawa-config-rom-printer /dev/fw1
{ 'bus-info': { 'adj': False,
'bmc': False,
'chip_ID': 349771402425,
'cmc': True,
'cyc_clk_acc': 255,
'generation': 1,
'imc': True,
'isc': True,
'link_spd': 2,
'max_ROM': 1,
'max_rec': 512,
'name': '1394',
'node_vendor_ID': 20674,
'pmc': False},
'root-directory': [ ['VENDOR', 20674],
['DESCRIPTOR', 'Solid State Logic'],
['MODEL', 112],
['DESCRIPTOR', 'Duende board'],
[ 'NODE_CAPABILITIES',
{ 'addressing': {'64': True, 'fix': True, 'prv': True},
'misc': {'int': False, 'ms': False, 'spt': True},
'state': { 'atn': False,
'ded': False,
'drq': True,
'elo': False,
'init': False,
'lst': True,
'off': False},
'testing': {'bas': False, 'ext': False}}],
[ 'UNIT',
[ ['SPECIFIER_ID', 20674],
['VERSION', 1],
['MODEL', 112],
['DESCRIPTOR', 'Duende board']]]]}
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 11907e9d3533648615db08140e3045b829d2c141 upstream.
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Signed-off-by: Wen Yang <yellowriver2010@hotmil.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit d9c0b2afe820fa3b3f8258a659daee2cc71ca3ef upstream.
BE dai links only have internal PCM's and their substream ops may
not be set. Suspending these PCM's will result in their
ops->trigger() being invoked and cause a kernel oops.
So skip suspending PCM's if their ops are NULL.
[ NOTE: this change is required now for following the recent PCM core
change to get rid of snd_pcm_suspend() call. Since DPCM BE takes
the runtime carried from FE while keeping NULL ops, it can hit this
bug. See details at:
https://github.com/thesofproject/linux/pull/582
-- tiwai ]
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 8fa857da9744f513036df1c43ab57f338941ae7d upstream.
The of_find_device_by_node() takes a reference to the underlying device
structure, we should release that reference.
Detected by coccinelle with the following warnings:
./sound/soc/fsl/imx-sgtl5000.c:169:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.
./sound/soc/fsl/imx-sgtl5000.c:177:1-7: ERROR: missing put_device;
call of_find_device_by_node on line 105, but without a corresponding
object release within this function.
Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: alsa-devel@alsa-project.org
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 113ce08109f8e3b091399e7cc32486df1cff48e7 upstream.
Currently PCM core sets each opened stream forcibly to SUSPENDED state
via snd_pcm_suspend_all() call, and the user-space is responsible for
re-triggering the resume manually either via snd_pcm_resume() or
prepare call. The scheme works fine usually, but there are corner
cases where the stream can't be resumed by that call: the streams
still in OPEN state before finishing hw_params. When they are
suspended, user-space cannot perform resume or prepare because they
haven't been set up yet. The only possible recovery is to re-open the
device, which isn't nice at all. Similarly, when a stream is in
DISCONNECTED state, it makes no sense to change it to SUSPENDED
state. Ditto for in SETUP state; which you can re-prepare directly.
So, this patch addresses these issues by filtering the PCM streams to
be suspended by checking the PCM state. When a stream is in either
OPEN, SETUP or DISCONNECTED as well as already SUSPENDED, the suspend
action is skipped.
To be noted, this problem was originally reported for the PCM runtime
PM on HD-audio. And, the runtime PM problem itself was already
addressed (although not intended) by the code refactoring commits
3d21ef0b49f8 ("ALSA: pcm: Suspend streams globally via device type PM
ops") and 17bc4815de58 ("ALSA: pci: Remove superfluous
snd_pcm_suspend*() calls"). These commits eliminated the
snd_pcm_suspend*() calls from the runtime PM suspend callback code
path, hence the racy OPEN state won't appear while runtime PM.
(FWIW, the race window is between snd_pcm_open_substream() and the
first power up in azx_pcm_open().)
Although the runtime PM issue was already "fixed", the same problem is
still present for the system PM, hence this patch is still needed.
And for stable trees, this patch alone should suffice for fixing the
runtime PM problem, too.
Reported-and-tested-by: Jon Hunter <jonathanh@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit ca0214ee2802dd47239a4e39fb21c5b00ef61b22 upstream.
The PCM OSS emulation converts and transfers the data on the fly via
"plugins". The data is converted over the dynamically allocated
buffer for each plugin, and recently syzkaller caught OOB in this
flow.
Although the bisection by syzbot pointed out to the commit
65766ee0bf7f ("ALSA: oss: Use kvzalloc() for local buffer
allocations"), this is merely a commit to replace vmalloc() with
kvmalloc(), hence it can't be the cause. The further debug action
revealed that this happens in the case where a slave PCM doesn't
support only the stereo channels while the OSS stream is set up for a
mono channel. Below is a brief explanation:
At each OSS parameter change, the driver sets up the PCM hw_params
again in snd_pcm_oss_change_params_lock(). This is also the place
where plugins are created and local buffers are allocated. The
problem is that the plugins are created before the final hw_params is
determined. Namely, two snd_pcm_hw_param_near() calls for setting the
period size and periods may influence on the final result of channels,
rates, etc, too, while the current code has already created plugins
beforehand with the premature values. So, the plugin believes that
channels=1, while the actual I/O is with channels=2, which makes the
driver reading/writing over the allocated buffer size.
The fix is simply to move the plugin allocation code after the final
hw_params call.
Reported-by: syzbot+d4503ae45b65c5bc1194@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit c709f14f0616482b67f9fbcb965e1493a03ff30b upstream.
dev is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
sound/core/seq/oss/seq_oss_synth.c:626 snd_seq_oss_synth_make_info() warn: potential spectre issue 'dp->synths' [w] (local cap)
Fix this by sanitizing dev before using it to index dp->synths.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 2b1d9c8f87235f593826b9cf46ec10247741fff9 upstream.
info->stream is indirectly controlled by user-space, hence leading to
a potential exploitation of the Spectre variant 1 vulnerability.
This issue was detected with the help of Smatch:
sound/core/rawmidi.c:604 __snd_rawmidi_info_select() warn: potential spectre issue 'rmidi->streams' [r] (local cap)
Fix this by sanitizing info->stream before using it to index
rmidi->streams.
Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].
[1] https://lore.kernel.org/lkml/20180423164740.GY17484@dhcp22.suse.cz/
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit b5a236c175b0d984552a5f7c9d35141024c2b261 upstream.
Recently we found the audio jack detection stop working after suspend
on many machines with Realtek codec. Sometimes the audio selection
dialogue didn't show up after users plugged headhphone/headset into
the headset jack, sometimes after uses plugged headphone/headset, then
click the sound icon on the upper-right corner of gnome-desktop, it
also showed the speaker rather than the headphone.
The root cause is that before suspend, the codec already call the
runtime_suspend since this codec is not used by any apps, then in
resume, it will not call runtime_resume for this codec. But for some
realtek codec (so far, alc236, alc255 and alc891) with the specific
BIOS, if it doesn't run runtime_resume after suspend, all codec
functions including jack detection stop working anymore.
This problem existed for a long time, but it was not exposed, that is
because when problem happens, if users play sound or open
sound-setting to check audio device, this will trigger calling to
runtime_resume (via snd_hda_power_up), then the codec starts working
again before users notice this problem.
Since we don't know how many codec and BIOS combinations have this
problem, to fix it, let the driver call runtime_resume for all codecs
in pm_resume, maybe for some codecs, this is not needed, but it is
harmless. After a codec is runtime resumed, if it is not used by any
apps, it will be runtime suspended soon and furthermore we don't run
suspend frequently, this change will not add much power consumption.
Fixes: cc72da7d4d06 ("ALSA: hda - Use standard runtime PM for codec power-save control")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 98081ca62cbac31fb0f7efaf90b2e7384ce22257 upstream.
Currently we deal with single codec and suspend codec callbacks for
all S3, S4 and runtime PM handling. But it turned out that we want
distinguish the call patterns sometimes, e.g. for applying some init
sequence only at probing and restoring from hibernate.
This patch slightly modifies the common PM callbacks for HD-audio
codec and stores the currently processed PM event in power_state of
the codec's device.power field, which is currently unused. The codec
callback can take a look at this event value and judges which purpose
it's being called.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 8dfb839cfe737a17def8e5f88ee13c295230364a upstream.
Commit 46e831abe864 ("drm/i915/lpe: Mark LPE audio runtime pm as
"no callbacks"") broke runtime PM with lpe audio. We can no longer
runtime suspend the GPU since the sysfs power/control for the
lpe-audio device no longer exists and the device is considered
always active. We can fix this by not marking the device as
active.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 46e831abe864 ("drm/i915/lpe: Mark LPE audio runtime pm as "no callbacks"")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024154825.18185-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 721f1e6c1fd137e7e2053d8e103b666faaa2d50c upstream.
Another machine which does not like the power saving (noise):
https://bugzilla.redhat.com/show_bug.cgi?id=1689623
Also, reorder the Lenovo C50 entry to keep the table sorted.
Reported-by: hs.guimaraes@outlook.com
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 304017d31df36fb61eb2ed3ebf65fb6870b3c731 upstream.
Topology resources are no longer needed if any element failed to load.
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 860b454c2c0cbda6892954f5cdbbb48931b3c8db upstream.
This patch moves clk_get_rate() call from trigger() to hw_params()
callback to avoid calling sleeping clk API from atomic context
and prevent deadlock as indicated below.
Before this change clk_get_rate() was being called with same
spinlock held as the one passed to the clk API when registering
clocks exposed by the I2S driver.
[ 82.109780] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
[ 82.117009] in_atomic(): 1, irqs_disabled(): 128, pid: 1554, name: speaker-test
[ 82.124235] 3 locks held by speaker-test/1554:
[ 82.128653] #0: cc8c5328 (snd_pcm_link_rwlock){...-}, at: snd_pcm_stream_lock_irq+0x20/0x38
[ 82.137058] #1: ec9eda17 (&(&substream->self_group.lock)->rlock){..-.}, at: snd_pcm_ioctl+0x900/0x1268
[ 82.146417] #2: 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4
[ 82.154650] irq event stamp: 8144
[ 82.157949] hardirqs last enabled at (8143): [<c0a0f574>] _raw_read_unlock_irq+0x24/0x5c
[ 82.166089] hardirqs last disabled at (8144): [<c0a0f6a8>] _raw_read_lock_irq+0x18/0x58
[ 82.174063] softirqs last enabled at (8004): [<c01024e4>] __do_softirq+0x3a4/0x66c
[ 82.181688] softirqs last disabled at (7997): [<c012d730>] irq_exit+0x140/0x168
[ 82.188964] Preemption disabled at:
[ 82.188967] [<00000000>] (null)
[ 82.195728] CPU: 6 PID: 1554 Comm: speaker-test Not tainted 5.0.0-rc5-00192-ga6e6caca8f03 #191
[ 82.204302] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[ 82.210376] [<c0111a54>] (unwind_backtrace) from [<c010d8f4>] (show_stack+0x10/0x14)
[ 82.218084] [<c010d8f4>] (show_stack) from [<c09ef004>] (dump_stack+0x90/0xc8)
[ 82.225278] [<c09ef004>] (dump_stack) from [<c0152980>] (___might_sleep+0x22c/0x2c8)
[ 82.232990] [<c0152980>] (___might_sleep) from [<c0a0a2e4>] (__mutex_lock+0x28/0xa3c)
[ 82.240788] [<c0a0a2e4>] (__mutex_lock) from [<c0a0ad80>] (mutex_lock_nested+0x1c/0x24)
[ 82.248763] [<c0a0ad80>] (mutex_lock_nested) from [<c04923dc>] (clk_prepare_lock+0x78/0xec)
[ 82.257079] [<c04923dc>] (clk_prepare_lock) from [<c049538c>] (clk_core_get_rate+0xc/0x5c)
[ 82.265309] [<c049538c>] (clk_core_get_rate) from [<c0766b18>] (i2s_trigger+0x490/0x6d4)
[ 82.273369] [<c0766b18>] (i2s_trigger) from [<c074fec4>] (soc_pcm_trigger+0x100/0x140)
[ 82.281254] [<c074fec4>] (soc_pcm_trigger) from [<c07378a0>] (snd_pcm_do_start+0x2c/0x30)
[ 82.289400] [<c07378a0>] (snd_pcm_do_start) from [<c07376cc>] (snd_pcm_action_single+0x38/0x78)
[ 82.298065] [<c07376cc>] (snd_pcm_action_single) from [<c073a450>] (snd_pcm_ioctl+0x910/0x1268)
[ 82.306734] [<c073a450>] (snd_pcm_ioctl) from [<c0292344>] (do_vfs_ioctl+0x90/0x9ec)
[ 82.314443] [<c0292344>] (do_vfs_ioctl) from [<c0292cd4>] (ksys_ioctl+0x34/0x60)
[ 82.321808] [<c0292cd4>] (ksys_ioctl) from [<c0101000>] (ret_fast_syscall+0x0/0x28)
[ 82.329431] Exception stack(0xeb875fa8 to 0xeb875ff0)
[ 82.334459] 5fa0: 00033c18 b6e31000 00000004 00004142 00033d80 00033d80
[ 82.342605] 5fc0: 00033c18 b6e31000 00008000 00000036 00008000 00000000 beea38a8 00008000
[ 82.350748] 5fe0: b6e3142c beea384c b6da9a30 b6c9212c
[ 82.355789]
[ 82.357245] ======================================================
[ 82.363397] WARNING: possible circular locking dependency detected
[ 82.369551] 5.0.0-rc5-00192-ga6e6caca8f03 #191 Tainted: G W
[ 82.376395] ------------------------------------------------------
[ 82.382548] speaker-test/1554 is trying to acquire lock:
[ 82.387834] 6d2007f4 (prepare_lock){+.+.}, at: clk_prepare_lock+0x78/0xec
[ 82.394593]
[ 82.394593] but task is already holding lock:
[ 82.400398] 6ac279bf (&(&pri_dai->spinlock)->rlock){..-.}, at: i2s_trigger+0x64/0x6d4
[ 82.408197]
[ 82.408197] which lock already depends on the new lock.
[ 82.416343]
[ 82.416343] the existing dependency chain (in reverse order) is:
[ 82.423795]
[ 82.423795] -> #1 (&(&pri_dai->spinlock)->rlock){..-.}:
[ 82.430472] clk_mux_set_parent+0x34/0xb8
[ 82.434975] clk_core_set_parent_nolock+0x1c4/0x52c
[ 82.440347] clk_set_parent+0x38/0x6c
[ 82.444509] of_clk_set_defaults+0xc8/0x308
[ 82.449186] of_clk_add_provider+0x84/0xd0
[ 82.453779] samsung_i2s_probe+0x408/0x5f8
[ 82.458376] platform_drv_probe+0x48/0x98
[ 82.462879] really_probe+0x224/0x3f4
[ 82.467037] driver_probe_device+0x70/0x1c4
[ 82.471716] bus_for_each_drv+0x44/0x8c
[ 82.476049] __device_attach+0xa0/0x138
[ 82.480382] bus_probe_device+0x88/0x90
[ 82.484715] deferred_probe_work_func+0x6c/0xbc
[ 82.489741] process_one_work+0x200/0x740
[ 82.494246] worker_thread+0x2c/0x4c8
[ 82.498408] kthread+0x128/0x164
[ 82.502131] ret_from_fork+0x14/0x20
[ 82.506204] (null)
[ 82.508976]
[ 82.508976] -> #0 (prepare_lock){+.+.}:
[ 82.514264] __mutex_lock+0x60/0xa3c
[ 82.518336] mutex_lock_nested+0x1c/0x24
[ 82.522756] clk_prepare_lock+0x78/0xec
[ 82.527088] clk_core_get_rate+0xc/0x5c
[ 82.531421] i2s_trigger+0x490/0x6d4
[ 82.535494] soc_pcm_trigger+0x100/0x140
[ 82.539913] snd_pcm_do_start+0x2c/0x30
[ 82.544246] snd_pcm_action_single+0x38/0x78
[ 82.549012] snd_pcm_ioctl+0x910/0x1268
[ 82.553345] do_vfs_ioctl+0x90/0x9ec
[ 82.557417] ksys_ioctl+0x34/0x60
[ 82.561229] ret_fast_syscall+0x0/0x28
[ 82.565477] 0xbeea384c
[ 82.568421]
[ 82.568421] other info that might help us debug this:
[ 82.568421]
[ 82.576394] Possible unsafe locking scenario:
[ 82.576394]
[ 82.582285] CPU0 CPU1
[ 82.586792] ---- ----
[ 82.591297] lock(&(&pri_dai->spinlock)->rlock);
[ 82.595977] lock(prepare_lock);
[ 82.601782] lock(&(&pri_dai->spinlock)->rlock);
[ 82.608975] lock(prepare_lock);
[ 82.612268]
[ 82.612268] *** DEADLOCK ***
Fixes: 647d04f8e07a ("ASoC: samsung: i2s: Ensure the RCLK rate is properly determined")
Reported-by: Krzysztof Kozłowski <krzk@kernel.org>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit c16e12010060c6c7a31f08b4a99513064cb53b7d upstream.
KASAN reports and additional traces point to out-of-bounds accesses to
the dapm_up_seq and dapm_down_seq lookup tables. The indices used are
larger than the array definition.
Fix by adding missing entries for the new widget types in these two
lookup tables, and align them with PGA values.
Also the sequences for the following widgets were not defined. Since
their values defaulted to zero, assign them explicitly
snd_soc_dapm_input
snd_soc_dapm_output
snd_soc_dapm_vmid
snd_soc_dapm_siggen
snd_soc_dapm_sink
Fixes: 8a70b4544ef4 ('ASoC: dapm: Add new widget type for constructing DAPM graphs on DSPs.').
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 05bd7fcdd06b19a10f069af1bea3ad9abac038d7 upstream.
The ADCs are sleeping when the SLEEP bit is set and running when it's
cleared, so the bit should be inverted.
Tested on pcm1863.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit fcf4daabf08079e6d09958a2992e7446ef8d0438 upstream.
According to DS, the gain is between -12 dB and 40 dB, with a 0.5 dB step.
Tested on pcm1863.
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Acked-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit cc29ea007347f39f4c5a4d27b0b555955a0277f9 upstream.
The ESAI_xCR_xWA is xCR's bit, not the xCCR's bit, driver set it to
wrong register, correct it.
Fixes 43d24e76b698 ("ASoC: fsl_esai: Add ESAI CPU DAI driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Ackedy-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit c0ca5eced22215c1e03e3ad479f8fab0bbb30772 upstream.
Dell Precision 5820 with ALC3234 codec (which is equivalent with
ALC255) shows click noises at (runtime) PM resume on the headphone.
The biggest source of the noise comes from the cleared headphone pin
control at resume, which is done via the standard shutup procedure.
Although we have an override of the standard shutup callback to
replace with NOP, this would skip other needed stuff (e.g. the pull
down of headset power). So, instead, this "fixes" the behavior of
alc_fixup_no_shutup() by introducing spec->no_shutup_pins flag.
When this flag is set, Realtek codec won't call the standard
snd_hda_shutup_pins() & co. Now alc_fixup_no_shutup() just sets this
flag instead of overriding spec->shutup callback itself. This allows
us to apply the similar fix for other entries easily if needed in
future.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 167897f4b32c2bc18b3b6183029a33fb420a114e upstream.
Apply the HP_MIC_NO_PRESENCE fixups for the more HP Z2 G4 and
HP Z240 models.
Reported-by: Jeff Burrell <jeff.burrell@hp.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit f97a0944a72b26a2bece72516294e112a890f98a upstream.
In data blocks of common isochronous packet for MOTU devices, PCM
frames are multiplexed in a shape of '24 bit * 4 Audio Pack', described
in IEC 61883-6. The frames are not aligned to quadlet.
For capture PCM substream, ALSA firewire-motu driver constructs PCM
frames by reading data blocks byte-by-byte. However this operation
includes bug for lower byte of the PCM sample. This brings invalid
content of the PCM samples.
This commit fixes the bug.
Reported-by: Peter Sjöberg <autopeter@gmail.com>
Cc: <stable@vger.kernel.org> # v4.12+
Fixes: 4641c9394010 ("ALSA: firewire-motu: add MOTU specific protocol layer")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
Liquid Saffire 56
commit 7dc661bd8d3261053b69e4e2d0050cd1ee540fc1 upstream.
ALSA bebob driver has an entry for Focusrite Saffire Pro 10 I/O. The
entry matches vendor_id in root directory and model_id in unit
directory of configuration ROM for IEEE 1394 bus.
On the other hand, configuration ROM of Focusrite Liquid Saffire 56
has the same vendor_id and model_id. This device is an application of
TCAT Dice (TCD2220 a.k.a Dice Jr.) however ALSA bebob driver can be
bound to it randomly instead of ALSA dice driver. At present, drivers
in ALSA firewire stack can not handle this situation appropriately.
This commit uses more identical mod_alias for Focusrite Saffire Pro 10
I/O in ALSA bebob driver.
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 042a829d bus_info_length 4, crc_length 42, crc 33437
404 31333934 bus_name "1394"
408 f0649222 irmc 1, cmc 1, isc 1, bmc 1, pmc 0, cyc_clk_acc 100,
max_rec 9 (1024), max_rom 2, gen 2, spd 2 (S400)
40c 00130e01 company_id 00130e |
410 000606e0 device_id 01000606e0 | EUI-64 00130e01000606e0
root directory
-----------------------------------------------------------------
414 0009d31c directory_length 9, crc 54044
418 04000014 hardware version
41c 0c0083c0 node capabilities per IEEE 1394
420 0300130e vendor
424 81000012 --> descriptor leaf at 46c
428 17000006 model
42c 81000016 --> descriptor leaf at 484
430 130120c2 version
434 d1000002 --> unit directory at 43c
438 d4000006 --> dependent info directory at 450
unit directory at 43c
-----------------------------------------------------------------
43c 0004707c directory_length 4, crc 28796
440 1200a02d specifier id: 1394 TA
444 13010001 version: AV/C
448 17000006 model
44c 81000013 --> descriptor leaf at 498
dependent info directory at 450
-----------------------------------------------------------------
450 000637c7 directory_length 6, crc 14279
454 120007f5 specifier id
458 13000001 version
45c 3affffc7 (immediate value)
460 3b100000 (immediate value)
464 3cffffc7 (immediate value)
468 3d600000 (immediate value)
descriptor leaf at 46c
-----------------------------------------------------------------
46c 00056f3b leaf_length 5, crc 28475
470 00000000 textual descriptor
474 00000000 minimal ASCII
478 466f6375 "Focu"
47c 73726974 "srit"
480 65000000 "e"
descriptor leaf at 484
-----------------------------------------------------------------
484 0004a165 leaf_length 4, crc 41317
488 00000000 textual descriptor
48c 00000000 minimal ASCII
490 50726f31 "Pro1"
494 30494f00 "0IO"
descriptor leaf at 498
-----------------------------------------------------------------
498 0004a165 leaf_length 4, crc 41317
49c 00000000 textual descriptor
4a0 00000000 minimal ASCII
4a4 50726f31 "Pro1"
4a8 30494f00 "0IO"
$ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 040442e4 bus_info_length 4, crc_length 4, crc 17124
404 31333934 bus_name "1394"
408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255,
max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400)
40c 00130e04 company_id 00130e |
410 018001e9 device_id 04018001e9 | EUI-64 00130e04018001e9
root directory
-----------------------------------------------------------------
414 00065612 directory_length 6, crc 22034
418 0300130e vendor
41c 8100000a --> descriptor leaf at 444
420 17000006 model
424 8100000e --> descriptor leaf at 45c
428 0c0087c0 node capabilities per IEEE 1394
42c d1000001 --> unit directory at 430
unit directory at 430
-----------------------------------------------------------------
430 000418a0 directory_length 4, crc 6304
434 1200130e specifier id
438 13000001 version
43c 17000006 model
440 8100000f --> descriptor leaf at 47c
descriptor leaf at 444
-----------------------------------------------------------------
444 00056f3b leaf_length 5, crc 28475
448 00000000 textual descriptor
44c 00000000 minimal ASCII
450 466f6375 "Focu"
454 73726974 "srit"
458 65000000 "e"
descriptor leaf at 45c
-----------------------------------------------------------------
45c 000762c6 leaf_length 7, crc 25286
460 00000000 textual descriptor
464 00000000 minimal ASCII
468 4c495155 "LIQU"
46c 49445f53 "ID_S"
470 41464649 "AFFI"
474 52455f35 "RE_5"
478 36000000 "6"
descriptor leaf at 47c
-----------------------------------------------------------------
47c 000762c6 leaf_length 7, crc 25286
480 00000000 textual descriptor
484 00000000 minimal ASCII
488 4c495155 "LIQU"
48c 49445f53 "ID_S"
490 41464649 "AFFI"
494 52455f35 "RE_5"
498 36000000 "6"
Cc: <stable@vger.kernel.org> # v3.16+
Fixes: 25784ec2d034 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit c407cd008fd039320d147088b52d0fa34ed3ddcb upstream.
Change snprintf to scnprintf. There are generally two cases where using
snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the
buffer size (SIZE) is, then size will end up larger than SIZE. In later
uses of snprintf, SIZE - size will result in a negative number, leading
to problems. Note that size might already be too large by using
size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user
space, then it will potentially allow for a buffer overflow and information
disclosure when size is greater than SIZE. When the size is used to index
the buffer directly, we can have memory corruption. This also means when
size = snprintf... is used, it may also cause problems since size may become
large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel
configuration.
The solution to these issues is to use scnprintf which returns the number of
characters actually written to the buffer, so the size variable will never
exceed SIZE.
Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Xiubo Li <Xiubo.Lee@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit e581e151e965bf1f2815dd94620b638fec4d0a7e upstream.
Change snprintf to scnprintf. There are generally two cases where using
snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the
buffer size (SIZE) is, then size will end up larger than SIZE. In later
uses of snprintf, SIZE - size will result in a negative number, leading
to problems. Note that size might already be too large by using
size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user
space, then it will potentially allow for a buffer overflow and information
disclosure when size is greater than SIZE. When the size is used to index
the buffer directly, we can have memory corruption. This also means when
size = snprintf... is used, it may also cause problems since size may become
large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel
configuration.
The solution to these issues is to use scnprintf which returns the number of
characters actually written to the buffer, so the size variable will never
exceed SIZE.
Signed-off-by: Silvio Cesare <silvio.cesare@gmail.com>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 8c3590de0a378c2449fc1aec127cc693632458e4 upstream.
Inside function rt274_i2c_probe(), if regmap_read() function
returns -EINVAL, then local variable "val" leaves uninitialized
but used in if statement. This is potentially unsafe.
Signed-off-by: Yizhuo <yzhai003@ucr.edu>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 678e2b44c8e3fec3afc7202f1996a4500a50be93 upstream.
The problem is seen in the q6asm_dai_compr_set_params() function:
ret = q6asm_map_memory_regions(dir, prtd->audio_client, prtd->phys,
(prtd->pcm_size / prtd->periods),
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
prtd->periods);
In this code prtd->pcm_size is the buffer_size and prtd->periods comes
from params->buffer.fragments. If we allow the number of fragments to
be zero then it results in a divide by zero bug. One possible fix would
be to use prtd->pcm_count directly instead of using the division to
re-calculate it. But I decided that it doesn't really make sense to
allow zero fragments.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 906a9abc5de73c383af518f5a806f4be2993a0c7 upstream.
For some reason this field was set to zero when all other drivers use
.dynamic = 1 for front-ends. This change was tested on Dell XPS13 and
has no impact with the existing legacy driver. The SOF driver also works
with this change which enables it to override the fixed topology.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
System76 oryp5
commit 7f665b1c3283aae5b61843136d0a8ee808ba3199 upstream.
On the System76 Oryx Pro (oryp5), there is a headset microphone input
attached to 0x19 that does not have a jack detect. In order to get it
working, the pin configuration needs to be set correctly, and the
ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC fixup needs to be applied. This is
similar to the MIC_NO_PRESENCE fixups for some Dell laptops, except we
have a separate microphone jack that is already configured correctly.
Since the ALC1220 does not have a fixup similar to
ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC, I have exposed the fixup from the
ALC269 in a way that it can be accessed from the
alc1220_fixup_system76_oryp5 function. In addition, the
alc1220_fixup_clevo_p950 needs to be applied to gain speaker output.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 0ce23d6d42147a692768e6baaaa3db75c44f4235 upstream.
hdmi-codec oopses the kernel when it is unbound from a successfully
bound audio subsystem, and is then rebound:
Unable to handle kernel NULL pointer dereference at virtual address 0000001c
pgd = ee3f0000
[0000001c] *pgd=3cc59831
Internal error: Oops: 817 [#1] PREEMPT ARM
Modules linked in: ext2 snd_soc_spdif_tx vmeta dove_thermal snd_soc_kirkwood ofpart marvell_cesa m25p80 orion_wdt mtd spi_nor des_generic gpio_ir_recv snd_soc_kirkwood_spdif bmm_dmabuf auth_rpcgss nfsd autofs4 etnaviv thermal_sys hwmon gpu_sched tda9950
CPU: 0 PID: 1005 Comm: bash Not tainted 4.20.0+ #1762
Hardware name: Marvell Dove (Cubox)
PC is at hdmi_dai_probe+0x68/0x80
LR is at find_held_lock+0x20/0x94
pc : [<c04c7de0>] lr : [<c0063bf4>] psr: 600f0013
sp : ee15bd28 ip : eebd8b1c fp : c093b488
r10: ee048000 r9 : eebdab18 r8 : ee048600
r7 : 00000001 r6 : 00000000 r5 : 00000000 r4 : ee82c100
r3 : 00000006 r2 : 00000001 r1 : c067e38c r0 : ee82c100
Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none[ 297.318599] Control: 10c5387d Table: 2e3f0019 DAC: 00000051
Process bash (pid: 1005, stack limit = 0xee15a248)
...
[<c04c7de0>] (hdmi_dai_probe) from [<c04b7060>] (soc_probe_dai.part.9+0x34/0x70)
[<c04b7060>] (soc_probe_dai.part.9) from [<c04b81a8>] (snd_soc_instantiate_card+0x734/0xc9c)
[<c04b81a8>] (snd_soc_instantiate_card) from [<c04b8b6c>] (snd_soc_add_component+0x29c/0x378)
[<c04b8b6c>] (snd_soc_add_component) from [<c04b8c8c>] (snd_soc_register_component+0x44/0x54)
[<c04b8c8c>] (snd_soc_register_component) from [<c04c64b4>] (devm_snd_soc_register_component+0x48/0x84)
[<c04c64b4>] (devm_snd_soc_register_component) from [<c04c7be8>] (hdmi_codec_probe+0x150/0x260)
[<c04c7be8>] (hdmi_codec_probe) from [<c0373124>] (platform_drv_probe+0x48/0x98)
This happens because hdmi_dai_probe() attempts to access the HDMI
codec private data, but this has not been assigned by hdmi_dai_probe()
before it calls devm_snd_soc_register_component(). Move the call to
dev_set_drvdata() before devm_snd_soc_register_component() to avoid
this oops.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 2bc16b9f3223d049b57202ee702fcb5b9b507019 upstream.
The commit a60945fd08e4 ("ALSA: usb-audio: move implicit fb quirks to
separate function") introduced an error in the handling of quirks for
implicit feedback endpoints. This commit fixes this.
If a quirk successfully sets up an implicit feedback endpoint, usb-audio
no longer tries to find the implicit fb endpoint itself.
Fixes: a60945fd08e4 ("ALSA: usb-audio: move implicit fb quirks to separate function")
Signed-off-by: Manuel Reinhardt <manuel.rhdt@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 4cd3016ce996494f78fdfd87ea35c8ca5d0b413e upstream.
This enables mute LED support and fixes switching jacks when the laptop
is docked.
Signed-off-by: Jurica Vukadin <jurica.vukadin@rt-rk.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 35a39f98567d8d3f1cea48f0f30de1a7e736b644 upstream.
Replace the open-codes in many places with a new common helper for
performing the same thing: referring to the primary headphone pin.
This eventually fixes the potentially missing headphone pin on some
weird devices, too.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit d561aa0a70bb2e1dd85fde98b6a5561e4175ac3e upstream.
When auto_mute = no or spec->suppress_auto_mute = 1, cfg->hp_pins will
lose value.
Add this patch to find hp_pins value.
I add fixed for ALC282 ALC225 ALC256 ALC294 and alc_default_init()
alc_default_shutup().
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|