| Age | Commit message (Collapse) | Author |
|---|
|
commit 1a462be52f4505a2719631fb5aa7bfdbd37bfd8d upstream.
In the commit 8e85def5723e ("ALSA: hda: enable regmap internal
locking"), we re-enabled the regmap lock due to the reported
regression that showed the possible concurrent accesses. It was a
temporary workaround, and there are still a few opened races even
after the revert. In this patch, we cover those still opened windows
with a proper mutex lock and disable the regmap internal lock again.
First off, the patch introduces a new snd_hdac_device.regmap_lock
mutex that is applied for each snd_hdac_regmap_*() call, including
read, write and update helpers. The mutex is applied carefully so
that it won't block the self-power-up procedure in the helper
function. Also, this assures the protection for the accesses without
regmap, too.
The snd_hdac_regmap_update_raw() is refactored to use the standard
regmap_update_bits_check() function instead of the open-code. The
non-regmap case is still open-coded but it's an easy part. The all
read and write operations are in the single mutex protection, so it's
now race-free.
In addition, a couple of new helper functions are added:
snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync(). Both
are called from HD-audio legacy driver. The former is to initialize
the given verb bits but only once when it's not initialized yet. Due
to this condition, the function invokes regcache_cache_only(), and
it's now performed inside the regmap_lock (formerly it was racy) too.
The latter function is for simply invoking regcache_sync() inside the
regmap_lock, which is called from the codec resume call path.
Along with that, the HD-audio codec driver code is slightly modified /
simplified to adapt those new functions.
And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are
rewritten with the helper macro. It's just for simplification because
the code logic is identical among all those functions.
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200109090104.26073-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit caf3c0437aaf2e63624c4aaf94c0dd38d1f897e3 upstream.
Make hda_nid_t tables static const, as they are not intended to be
modified by callees.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/5150c94101c9534f4c8e987324f6912c16d459f6.1578043216.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 89781d0806c2c4f29072d3f00cb2dd4274aabc3d upstream.
The recent change to shuffle the codec initialization procedure for
Realtek via commit 607ca3bd220f ("ALSA: hda/realtek - EAPD turn on
later") caused the silent output on some machines. This change was
supposed to be safe, but it isn't actually; some devices have quirk
setups to override the EAPD via COEF or BTL in the additional verb
table, which is applied at the beginning of snd_hda_gen_init(). And
this EAPD setup is again overridden in alc_auto_init_amp().
For recovering from the regression, tell snd_hda_gen_init() not to
apply the verbs there by a new flag, then apply the verbs in
alc_init().
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=204727
Fixes: 607ca3bd220f ("ALSA: hda/realtek - EAPD turn on later")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 871b9066027702e6e6589da0e1edd3b7dede7205 upstream.
Make codec enter D3 before rebooting or poweroff can fix the noise
issue on some laptops. And in theory it is harmless for all codecs
to enter D3 before rebooting or poweroff, let us add a generic
reboot_notify, then realtek and conexant drivers can call this
function.
Cc: stable@vger.kernel.org
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit cfef67f016e4c00a2f423256fc678a6967a9fc09 upstream.
In snd_hda_parse_generic_codec(), 'spec' is allocated through kzalloc().
Then, the pin widgets in 'codec' are parsed. However, if the parsing
process fails, 'spec' is not deallocated, leading to a memory leak.
To fix the above issue, free 'spec' before returning the error.
Fixes: 352f7f914ebb ("ALSA: hda - Merge Realtek parser code to generic parser")
Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Based on 1 normalized pattern(s):
this driver is free software you can redistribute it and or modify
it under the terms of the gnu general public license as published by
the free software foundation either version 2 of the license or at
your option any later version this driver is distributed in the hope
that it will be useful but without any warranty without even the
implied warranty of merchantability or fitness for a particular
purpose see the gnu general public license for more details you
should have received a copy of the gnu general public license along
with this program if not write to the free software foundation inc
59 temple place suite 330 boston ma 02111 1307 usa
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-or-later
has been chosen to replace the boilerplate/reference in 18 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520170857.186505395@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now all relevant platform drivers are providing the LED audio trigger,
we can switch the mute LED control with the LED trigger, finally.
For the mic-mute LED trigger, a common fixup function,
snd_hda_gen_fixup_micmute_led(), is provided to be called for the
corresponding quirk entries. This sets up the capture sync hook with
ledtrig_audio_set() call appropriately.
For the mute LED trigger, which is done currently only for
thinkpad_acpi, the call is replaced with ledtrig_audio_set() as well.
Overall, the beauty of the new implementation is that the whole ugly
bindings with request_symbol() are dropped, and also that it provides
more flexibility to users.
One potential behavior change by this patch is that the mute LED enum
may be created on machines that actually have no LED device. In the
former code, we did test-call and abort binding if the test failed.
But with the LED-trigger binding, this test isn't possible, and the
actual check is done in the LED class device side. So it's the
downside of simpleness.
Also, note that the HD-audio codec driver doesn't select CONFIG_LEDS
and co by itself. It's supposed to be selected by the platform
drivers instead.
Acked-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
As suggested by Takashi, move this header file to make it easier
to include from e.g. the Intel Skylake driver in follow-up patches
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
snd_hda_codec_update_cache() used to serve for a slightly different
purpose from snd_hdac_write_cache(), but now both of them became
identical.
Let's unify and replace with the latter one consistently.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Instead of refusing, allow the configuration with the multiple ADCs
(thus multiple capture switches) for enabling the mic mute LED.
This has been done for Sigmatel/IDT codecs, and we treat the OR-ed
values from all capture switches as the boolean condition.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Move the code for setting up and controlling the mic mute LED hook
from dell-wmi helper to the generic parser, so that it can be referred
from the multiple driver codes.
No functional change.
Tested-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
A series of SNDRV_CTL_TLVO_XXX macro was introduced for position offset
of TLV data. This commit applies a code optimization.
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Introduce a new helper macro, snd_array_for_each(), to iterate for
each snd_array element. It slightly improves the readability than
lengthy open codes at each place.
Along with it, add const prefix to some obvious places.
There should be no functional changes by this.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If snd_hda_get_conn_list() fails then "conn" isn't initialized.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
Recently we met a problem, the codec has valid adcs and input pins,
and they can form valid input paths, but the driver does not build
valid controls for them like "Mic boost", "Capture Volume" and
"Capture Switch".
Through debugging, I found the driver needs to shrink the invalid
adcs and input paths for this machine, so it will move the whole
column bitmap value to the previous column, after moving it, the
driver forgets to set the original column bitmap value to zero, as a
result, the driver will invalidate the path whose index value is the
original colume bitmap value. After executing this function, all
valid input paths are invalidated by a mistake, there are no any
valid input paths, so the driver won't build controls for them.
Fixes: 3a65bcdc577a ("ALSA: hda - Fix inconsistent input_paths after ADC reduction")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The generic parser is the only user of the bind-mixer controls, so we
can move the code there and clean up the core helper.
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Another preliminary patch for the dual-codec support: since the
support of vmaster over multiple codecs is difficult, simply disable
it by a new flag to hda_codec struct. A new user hint is added as
well for consistency.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This is a preliminary patch for a smooth multi-codec support, and it
introduces a new flag, force_pin_prefix, to struct hda_codec.
This flag is used to force to add the pin location prefix to each
input pin. For example, when there is only one microphone pin,
usually the auto-parser assigns the string "Mic". With this flag on,
it'll be like "Front Mic". Also, the creation of "Master" or "PCM"
playback volume for a single pin is suppressed, too.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195305
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merged 4.8 changes.
|
|
UBSAN reports the following warning from accessing path->path[-1]
in set_path_power():
[ 16.078040] ================================================================================
[ 16.078124] UBSAN: Undefined behaviour in sound/pci/hda/hda_generic.c:3981:17
[ 16.078198] index -1 is out of range for type 'hda_nid_t [10]'
[ 16.078270] CPU: 2 PID: 1738 Comm: modprobe Not tainted 4.7.0-rc1-wt+ #47
[ 16.078274] Hardware name: LENOVO 3443CTO/3443CTO, BIOS G6ET23WW (1.02 ) 08/14/2012
[ 16.078278] ffff8800cb246000 ffff8800cb3638b8 ffffffff815c4fe3 0000000000000032
[ 16.078286] ffff8800cb3638e0 ffffffffffffffff ffff8800cb3638d0 ffffffff8162443d
[ 16.078294] ffffffffa0894200 ffff8800cb363920 ffffffff81624af7 0000000000000292
[ 16.078302] Call Trace:
[ 16.078311] [<ffffffff815c4fe3>] dump_stack+0x86/0xd3
[ 16.078317] [<ffffffff8162443d>] ubsan_epilogue+0xd/0x40
[ 16.078324] [<ffffffff81624af7>] __ubsan_handle_out_of_bounds+0x67/0x70
[ 16.078335] [<ffffffffa087665f>] set_path_power+0x1bf/0x230 [snd_hda_codec_generic]
[ 16.078344] [<ffffffffa087880d>] add_pin_power_ctls+0x8d/0xc0 [snd_hda_codec_generic]
[ 16.078352] [<ffffffffa087f190>] ? pin_power_down_callback+0x20/0x20 [snd_hda_codec_generic]
[ 16.078360] [<ffffffffa0878947>] add_all_pin_power_ctls+0x107/0x150 [snd_hda_codec_generic]
[ 16.078370] [<ffffffffa08842b3>] snd_hda_gen_parse_auto_config+0x2d73/0x49e0 [snd_hda_codec_generic]
[ 16.078376] [<ffffffff81173360>] ? trace_hardirqs_on_caller+0x1b0/0x2c0
[ 16.078390] [<ffffffffa089df27>] alc_parse_auto_config+0x147/0x310 [snd_hda_codec_realtek]
[ 16.078402] [<ffffffffa08a332a>] patch_alc269+0x23a/0x560 [snd_hda_codec_realtek]
[ 16.078417] [<ffffffffa0838644>] hda_codec_driver_probe+0xa4/0x1a0 [snd_hda_codec]
[ 16.078424] [<ffffffff817bbac1>] driver_probe_device+0x101/0x380
[ 16.078430] [<ffffffff817bbdf9>] __driver_attach+0xb9/0x100
[ 16.078438] [<ffffffff817bbd40>] ? driver_probe_device+0x380/0x380
[ 16.078444] [<ffffffff817b8d20>] bus_for_each_dev+0x70/0xc0
[ 16.078449] [<ffffffff817bb087>] driver_attach+0x27/0x50
[ 16.078454] [<ffffffff817ba956>] bus_add_driver+0x166/0x2c0
[ 16.078460] [<ffffffffa0369000>] ? 0xffffffffa0369000
[ 16.078465] [<ffffffff817bd13d>] driver_register+0x7d/0x130
[ 16.078477] [<ffffffffa083816f>] __hda_codec_driver_register+0x6f/0x90 [snd_hda_codec]
[ 16.078488] [<ffffffffa036901e>] realtek_driver_init+0x1e/0x1000 [snd_hda_codec_realtek]
[ 16.078493] [<ffffffff8100215e>] do_one_initcall+0x4e/0x1d0
[ 16.078499] [<ffffffff8119f54d>] ? rcu_read_lock_sched_held+0x6d/0x80
[ 16.078504] [<ffffffff813701b1>] ? kmem_cache_alloc_trace+0x391/0x560
[ 16.078510] [<ffffffff812bb314>] ? do_init_module+0x28/0x273
[ 16.078515] [<ffffffff812bb387>] do_init_module+0x9b/0x273
[ 16.078522] [<ffffffff811e3782>] load_module+0x20b2/0x3410
[ 16.078527] [<ffffffff811df140>] ? m_show+0x210/0x210
[ 16.078533] [<ffffffff813b2b26>] ? kernel_read+0x66/0xe0
[ 16.078541] [<ffffffff811e4cfa>] SYSC_finit_module+0xba/0xc0
[ 16.078547] [<ffffffff811e4d1e>] SyS_finit_module+0xe/0x10
[ 16.078552] [<ffffffff81a860fc>] entry_SYSCALL_64_fastpath+0x1f/0xbd
[ 16.078556] ================================================================================
Fix by checking path->depth before use.
Signed-off-by: Bob Copeland <me@bobcopeland.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
So far, we enabled the loopback mixing control as default, as this
behavior made somewhat compatible with the earlier HD-audio drivers
for Realtek & co. However, it's getting annoying as we've got more
and more bug reports about the noise coming from the loopback route.
Since the loopback mixing is used fairly rarely and often harmful
(e.g. using PA), let's get rid of the default turn-on lines.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
For taking back the recent change of HDA HDMI fixes for i915 HSW/BDW.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We've got a regression report that the recording on Mac with a cirrus
codec doesn't work any longer. This turned out to be the missing
power up to D0 by power_save_node enablement.
After analyzing the traces, we found out that the culprit is that the
codec advertises the "actual" power state of a few nodes to be D0
while the "target" power state is D3. This inconsistency is usually
OK, as it implies the power transition. But in the case of cirrus
codec, this seems to be stuck to D3 while it's not actually D0.
This patch addresses the issue by checking the power state difference
more strictly. It sends the power-state change verb unless both the
target and the actual power states show the given value.
We may introduce yet another flag indicating the possible broken
hardware power state, but it's anyway safer to set the proper power
state even in a transition (at least it's harmless as long as the
target state is same). So this simpler change was applied now.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116171
Cc: <stable@vger.kernel.org> # v4.4+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The calls for capture_hook were missing in dyn_adc_capture_pcm_prepare
and cleanup callbacks. Luckily there are no users of the capture
hooks with dyn-adc PCM, so far, thus this doesn't change the behavior
of existing devices, but it's a fix for a future usage.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The hda_jack_tbl entries are managed by snd_array for allowing
multiple jacks. It's good per se, but the problem is that struct
hda_jack_callback keeps the hda_jack_tbl pointer. Since snd_array
doesn't preserve each pointer at resizing the array, we can't keep the
original pointer but have to deduce the pointer at each time via
snd_array_entry() instead. Actually, this resulted in the deference
to the wrong pointer on codecs that have many pins such as CS4208.
This patch replaces the pointer to the NID value as the search key.
As an unexpected good side effect, this even simplifies the code, as
only NID is needed in most cases.
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Many codecs, typically found on Realtek codecs, have the analog
loopback path merged to the secondary input of the middle of the
output paths. Currently, we don't offer the dynamic switching in such
configuration but let each loopback path mute by itself.
This should work well in theory, but in reality, we often see that
such a dead loopback path causes some background noises even if all
the elements get muted. Such a problem has been fixed by adding the
quirk accordingly to disable aamix, and it's the right fix, per se.
The only problem is that it's not so trivial to achieve it; user needs
to pass a hint string via patch module option or sysfs.
This patch gives a bit improvement on the situation: it adds "Loopback
Mixing" control element for such codecs like other codecs (e.g. IDT or
VIA codecs) with the individual loopback paths. User can turn on/off
the loopback path simply via a mixer app.
For keeping the compatibility, the loopback is still enabled on these
codecs. But user can try to turn it off if experiencing a suspicious
background or click noise on the fly, then build a static fixup later
once after the problem is addressed.
Other than the addition of the loopback enable/disablement control,
there should be no changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
An exported function snd_hda_parse_nid_path() is used only inside
hda_generic.c. Let's make it a static local function for a better
code optimization.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
An exported helper function snd_hda_get_nid_path() is nowhere used.
Let's remove it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Finally we have a proper infrastructure to generate the modaliases
automatically, let's move to hda_device_id from the legacy
hda_codec_preset that contains basically the same information.
The patch function hook is stored in driver_data field, which is long,
and we need an explicit cast. Other than that, the conversion is
mostly straightforward. Each entry is even simplified using a macro,
and the lengthy (and error-prone) manual modaliases got removed.
As a result, we achieved a quite good diet:
14 files changed, 407 insertions(+), 595 deletions(-)
Reviewed-by: Vinod Koul <vinod.koul@intel.com>
Tested-by: Subhransu S Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The widget power-saving code tries to turn up/down the power of each
widget in the I/O paths that are modified at each jack plug/unplug.
The recent report revealed that the power activation leaves some
widgets unpowered after plugging. This is because
snd_hda_activate_path() turns on path->active flag at the end of the
function while the path power management is done before that. Then
it's regarded as if nothing is active, and the driver turns off the
power.
The fix is simply to set the flag at the beginning of the function,
before trying to power up.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102521
Cc: <stable@vger.kernel.org> [v4.1+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The is_active_nid_for_any() function in the generic parser is supposed
to check all connections from/to the given widget, but the current
code checks only the first input connection (index = 0).
This patch corrects the code to check all inputs by passing -1 to
index argument.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102521
Cc: <stable@vger.kernel.org> [v4.1+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently, the alt PCM open callback returns -EBUSY when an
independent HP is turned off, supposing that it conflicts with the
main PCM. However, obviously, this check is wrong when the
independent HP itself isn't enabled but the alt PCM was explicitly
created via alc_dac_nid by a codec driver.
Reported-and-tested-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This allows user to test power_save_node feature via sysfs or patch
firmware even on the codecs that don't specify it. It'll also save a
few lines.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The widget (node) power-saves restore the widget states at each
transition from D3 to D0 on each node. This was added in the commit
[d545a57c5f84:ALSA: hda - Sync node attributes at resume from widget
power saving]. However, the test was rater false-positive; this
wasn't needed for any codecs.
Since the resync may take significant number of additional verbs to be
executed, it's better to reduce it. Let's disable it for now again.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Dell XPS13 produces a click noise at boot up, and Gabriele spotted out
that it's triggered by the initial pin control of the mic (NID 0x19).
This has to be set to Hi-Z Vref while the driver initializes to Vref
80% as a normal mic.
This patch fixes the generic parser code not to override the target
vref if it has been already set by the driver, and adds a proper
initialization of the target vref for this pin in the Realtek driver
side.
Reported-and-tested-by: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently the generic parser sets codec->power_filter when
power_save_node flag is set. But this overrides the existing filter
that has been already set by the codec driver, thus it looses some
features. Instead, set the default power_filter only when it's not
set yet.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add the check of power_save_node flag at the beginning of the function
so that it skips the rest if the flag isn't set. In this way, we can
call this function safely no matter whether the widget power-saving is
really used or not.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When the widget power-saving is enabled, the first automute hook
invocation checks through the whole pins and it also tries to
synchronize the power state. However, this results in a wrong state
because it calls unconditionally snd_hda_jack_detect_state().
This patch adds a check of jack detectability before the actual jack
detection call.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The new widget power-saving tries to apply the power change no matter
whether the node has a power cap or not. It's bad (although most of
codecs chip just ignore it). Check the capability properly
beforehand.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
So far we assumed that the node attributes like amp values remain
during the power state transition of the node itself. While this is
true for IDT/STAC codecs I've tested, but some other codecs don't seem
behaving in that way.
This patch implements a partial sync mechanism specific to the given
widget node. Now we've merged the regmap support, and it can be
easily written with regcache_sync_region().
Tested-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Like the previous patches, this patch converts also to the regmap, at
this time, the cached verb writes are the target. But this conversion
needs a bit more caution than before.
- In the old code, we just record any verbs as is, and restore them at
resume. For the regmap scheme, this doesn't work, since a few verbs
like AMP or DIGI_CONVERT are asymmetrical. Such verbs are converted
either to the dedicated function (snd_hda_regmap_xxx_amp()) or
changed to the unified verb.
- Some verbs have to be declared as vendor-specific ones before
accessing via regmap.
Also, the minor optimization with codec->cached_write flag is dropped
in a few places, as this would confuse the operation. Further
optimizations will be brought in the later patches, if any.
This conversion ends up with a drop of significant amount of codes,
mostly the helper codes that are no longer used.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Now some codes and functionalities of hda_codec struct are moved to
hdac_device struct. A few basic attributes like the codec address,
vendor ID number, FG numbers, etc are moved to hdac_device, and they
are accessed like codec->core.addr. The basic verb exec functions are
moved, too.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
David suggested that the name "power_mgmt" is too ambiguous. Rename
the flag with a bit clearer one "power_save_node".
Also, add the corresponding description to HD-Audio.txt, too.
Reported-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Some pins are used for controlling the LED with the VREF value.
This patch changes the power behavior of such pins to be constantly
up. A new state, pin_fixed, is introduced to nid_path to indicate
that the path contains the fixed pin. This improves also the
readability a bit for other static routes, too.
Then a helper function snd_hda_gen_fix_pin_power() is called from the
codec driver for such fixed pins, and it will create fake paths
containing only these pins with pin_fixed=1 flag.
Reported-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
As the widget PM may turn off the pins, this might lead to the silent
output for beep when no explicit paths are given. This patch adds
fake output paths for the beep widget so that the output pins are
dynamically powered upon beep on/off.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch enables the finer power state control of each widget
depending on the jack plug state and streaming state in addition to
the existing power_down_unused power optimization. The new feature is
enabled only when codec->power_mgmt flag is set.
Two new flags, pin_enabled and stream_enabled, are introduced in
nid_path struct for marking the two individual power states: the pin
plug/unplug and DAC/ADC stream, respectively. They can be set
statically in case they are static routes (e.g. some mixer paths),
too.
The power up and down events for each pin are triggered via the
standard hda_jack table. The call order is hard-coded, relying on the
current implementation of jack event chain (a la FILO/stack order).
One point to be dealt carefully is that DAC/ADC cannot be powered
on/off while streaming. They are pinned as long as the stream is
running. For controlling the power of DAC/ADC, a new patch_ops is
added. The generic parser provides the default callback for that.
As of this patch, only IDT/Sigmatel codec driver enables the flag.
The support on other codecs will follow.
An assumption we made in this code is that the widget state (e.g. amp,
pinctl, connections) remains after the widget power transition (not
about FG power transition). This is true for IDT codecs, at least.
But if the widget state is lost at widget power transition, we'd need
to implement additional code to sync the cached amp/verbs for the
specific NID.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch does two things:
- code refactoring with a local helper function,
- allow codec drivers to provide the specific PCM stream info pointers
only for overriding the non-NULL entries, instead of copying the
whole.
This simplifies the codec driver side (currently the only user is
alc269's 44kHz fixed rate).
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
|
Takashi Iwai
Michał Mirosław
Hui Wang
Wenwen Wang
Thomas Gleixner
Pierre-Louis Bossart
Takashi Sakamoto
Dan Carpenter
Bob Copeland