aboutsummaryrefslogtreecommitdiffstats
path: root/security/keys
AgeCommit message (Collapse)Author
2020-04-16keys: Fix proc_keys_next to increase position indexVasily Averin
If seq_file .next function does not change position index, read after some lseek can generate unexpected output: $ dd if=/proc/keys bs=1 # full usual output 0f6bfdf5 I--Q--- 2 perm 3f010000 1000 1000 user 4af2f79ab8848d0a: 740 1fb91b32 I--Q--- 3 perm 1f3f0000 1000 65534 keyring _uid.1000: 2 27589480 I--Q--- 1 perm 0b0b0000 0 0 user invocation_id: 16 2f33ab67 I--Q--- 152 perm 3f030000 0 0 keyring _ses: 2 33f1d8fa I--Q--- 4 perm 3f030000 1000 1000 keyring _ses: 1 3d427fda I--Q--- 2 perm 3f010000 1000 1000 user 69ec44aec7678e5a: 740 3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1 521+0 records in 521+0 records out 521 bytes copied, 0,00123769 s, 421 kB/s But a read after lseek in middle of last line results in the partial last line and then a repeat of the final line: $ dd if=/proc/keys bs=500 skip=1 dd: /proc/keys: cannot skip to specified offset g _uid_ses.1000: 1 3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1 0+1 records in 0+1 records out 97 bytes copied, 0,000135035 s, 718 kB/s and a read after lseek beyond end of file results in the last line being shown: $ dd if=/proc/keys bs=1000 skip=1 # read after lseek beyond end of file dd: /proc/keys: cannot skip to specified offset 3ead4096 I--Q--- 1 perm 1f3f0000 1000 65534 keyring _uid_ses.1000: 1 0+1 records in 0+1 records out 76 bytes copied, 0,000119981 s, 633 kB/s See https://bugzilla.kernel.org/show_bug.cgi?id=206283 Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code ...") Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-04Merge tag 'keys-fixes-20200329' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyrings fixes from David Howells: "Here's a couple of patches that fix a circular dependency between holding key->sem and mm->mmap_sem when reading data from a key. One potential issue is that a filesystem looking to use a key inside, say, ->readpages() could deadlock if the key being read is the key that's required and the buffer the key is being read into is on a page that needs to be fetched. The case actually detected is a bit more involved - with a filesystem calling request_key() and locking the target keyring for write - which could be being read" * tag 'keys-fixes-20200329' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: KEYS: Avoid false positive ENOMEM error on key read KEYS: Don't write out to userspace while holding key semaphore
2020-03-29KEYS: Avoid false positive ENOMEM error on key readWaiman Long
By allocating a kernel buffer with a user-supplied buffer length, it is possible that a false positive ENOMEM error may be returned because the user-supplied length is just too large even if the system do have enough memory to hold the actual key data. Moreover, if the buffer length is larger than the maximum amount of memory that can be returned by kmalloc() (2^(MAX_ORDER-1) number of pages), a warning message will also be printed. To reduce this possibility, we set a threshold (PAGE_SIZE) over which we do check the actual key length first before allocating a buffer of the right size to hold it. The threshold is arbitrary, it is just used to trigger a buffer length check. It does not limit the actual key length as long as there is enough memory to satisfy the memory request. To further avoid large buffer allocation failure due to page fragmentation, kvmalloc() is used to allocate the buffer so that vmapped pages can be used when there is not a large enough contiguous set of pages available for allocation. In the extremely unlikely scenario that the key keeps on being changed and made longer (still <= buflen) in between 2 __keyctl_read_key() calls, the __keyctl_read_key() calling loop in keyctl_read_key() may have to be iterated a large number of times, but definitely not infinite. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com>
2020-03-29KEYS: Don't write out to userspace while holding key semaphoreWaiman Long
A lockdep circular locking dependency report was seen when running a keyutils test: [12537.027242] ====================================================== [12537.059309] WARNING: possible circular locking dependency detected [12537.088148] 4.18.0-147.7.1.el8_1.x86_64+debug #1 Tainted: G OE --------- - - [12537.125253] ------------------------------------------------------ [12537.153189] keyctl/25598 is trying to acquire lock: [12537.175087] 000000007c39f96c (&mm->mmap_sem){++++}, at: __might_fault+0xc4/0x1b0 [12537.208365] [12537.208365] but task is already holding lock: [12537.234507] 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220 [12537.270476] [12537.270476] which lock already depends on the new lock. [12537.270476] [12537.307209] [12537.307209] the existing dependency chain (in reverse order) is: [12537.340754] [12537.340754] -> #3 (&type->lock_class){++++}: [12537.367434] down_write+0x4d/0x110 [12537.385202] __key_link_begin+0x87/0x280 [12537.405232] request_key_and_link+0x483/0xf70 [12537.427221] request_key+0x3c/0x80 [12537.444839] dns_query+0x1db/0x5a5 [dns_resolver] [12537.468445] dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs] [12537.496731] cifs_reconnect+0xe04/0x2500 [cifs] [12537.519418] cifs_readv_from_socket+0x461/0x690 [cifs] [12537.546263] cifs_read_from_socket+0xa0/0xe0 [cifs] [12537.573551] cifs_demultiplex_thread+0x311/0x2db0 [cifs] [12537.601045] kthread+0x30c/0x3d0 [12537.617906] ret_from_fork+0x3a/0x50 [12537.636225] [12537.636225] -> #2 (root_key_user.cons_lock){+.+.}: [12537.664525] __mutex_lock+0x105/0x11f0 [12537.683734] request_key_and_link+0x35a/0xf70 [12537.705640] request_key+0x3c/0x80 [12537.723304] dns_query+0x1db/0x5a5 [dns_resolver] [12537.746773] dns_resolve_server_name_to_ip+0x1e1/0x4d0 [cifs] [12537.775607] cifs_reconnect+0xe04/0x2500 [cifs] [12537.798322] cifs_readv_from_socket+0x461/0x690 [cifs] [12537.823369] cifs_read_from_socket+0xa0/0xe0 [cifs] [12537.847262] cifs_demultiplex_thread+0x311/0x2db0 [cifs] [12537.873477] kthread+0x30c/0x3d0 [12537.890281] ret_from_fork+0x3a/0x50 [12537.908649] [12537.908649] -> #1 (&tcp_ses->srv_mutex){+.+.}: [12537.935225] __mutex_lock+0x105/0x11f0 [12537.954450] cifs_call_async+0x102/0x7f0 [cifs] [12537.977250] smb2_async_readv+0x6c3/0xc90 [cifs] [12538.000659] cifs_readpages+0x120a/0x1e50 [cifs] [12538.023920] read_pages+0xf5/0x560 [12538.041583] __do_page_cache_readahead+0x41d/0x4b0 [12538.067047] ondemand_readahead+0x44c/0xc10 [12538.092069] filemap_fault+0xec1/0x1830 [12538.111637] __do_fault+0x82/0x260 [12538.129216] do_fault+0x419/0xfb0 [12538.146390] __handle_mm_fault+0x862/0xdf0 [12538.167408] handle_mm_fault+0x154/0x550 [12538.187401] __do_page_fault+0x42f/0xa60 [12538.207395] do_page_fault+0x38/0x5e0 [12538.225777] page_fault+0x1e/0x30 [12538.243010] [12538.243010] -> #0 (&mm->mmap_sem){++++}: [12538.267875] lock_acquire+0x14c/0x420 [12538.286848] __might_fault+0x119/0x1b0 [12538.306006] keyring_read_iterator+0x7e/0x170 [12538.327936] assoc_array_subtree_iterate+0x97/0x280 [12538.352154] keyring_read+0xe9/0x110 [12538.370558] keyctl_read_key+0x1b9/0x220 [12538.391470] do_syscall_64+0xa5/0x4b0 [12538.410511] entry_SYSCALL_64_after_hwframe+0x6a/0xdf [12538.435535] [12538.435535] other info that might help us debug this: [12538.435535] [12538.472829] Chain exists of: [12538.472829] &mm->mmap_sem --> root_key_user.cons_lock --> &type->lock_class [12538.472829] [12538.524820] Possible unsafe locking scenario: [12538.524820] [12538.551431] CPU0 CPU1 [12538.572654] ---- ---- [12538.595865] lock(&type->lock_class); [12538.613737] lock(root_key_user.cons_lock); [12538.644234] lock(&type->lock_class); [12538.672410] lock(&mm->mmap_sem); [12538.687758] [12538.687758] *** DEADLOCK *** [12538.687758] [12538.714455] 1 lock held by keyctl/25598: [12538.732097] #0: 000000003de5b58d (&type->lock_class){++++}, at: keyctl_read_key+0x15a/0x220 [12538.770573] [12538.770573] stack backtrace: [12538.790136] CPU: 2 PID: 25598 Comm: keyctl Kdump: loaded Tainted: G [12538.844855] Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 Gen9, BIOS P89 12/27/2015 [12538.881963] Call Trace: [12538.892897] dump_stack+0x9a/0xf0 [12538.907908] print_circular_bug.isra.25.cold.50+0x1bc/0x279 [12538.932891] ? save_trace+0xd6/0x250 [12538.948979] check_prev_add.constprop.32+0xc36/0x14f0 [12538.971643] ? keyring_compare_object+0x104/0x190 [12538.992738] ? check_usage+0x550/0x550 [12539.009845] ? sched_clock+0x5/0x10 [12539.025484] ? sched_clock_cpu+0x18/0x1e0 [12539.043555] __lock_acquire+0x1f12/0x38d0 [12539.061551] ? trace_hardirqs_on+0x10/0x10 [12539.080554] lock_acquire+0x14c/0x420 [12539.100330] ? __might_fault+0xc4/0x1b0 [12539.119079] __might_fault+0x119/0x1b0 [12539.135869] ? __might_fault+0xc4/0x1b0 [12539.153234] keyring_read_iterator+0x7e/0x170 [12539.172787] ? keyring_read+0x110/0x110 [12539.190059] assoc_array_subtree_iterate+0x97/0x280 [12539.211526] keyring_read+0xe9/0x110 [12539.227561] ? keyring_gc_check_iterator+0xc0/0xc0 [12539.249076] keyctl_read_key+0x1b9/0x220 [12539.266660] do_syscall_64+0xa5/0x4b0 [12539.283091] entry_SYSCALL_64_after_hwframe+0x6a/0xdf One way to prevent this deadlock scenario from happening is to not allow writing to userspace while holding the key semaphore. Instead, an internal buffer is allocated for getting the keys out from the read method first before copying them out to userspace without holding the lock. That requires taking out the __user modifier from all the relevant read methods as well as additional changes to not use any userspace write helpers. That is, 1) The put_user() call is replaced by a direct copy. 2) The copy_to_user() call is replaced by memcpy(). 3) All the fault handling code is removed. Compiling on a x86-64 system, the size of the rxrpc_read() function is reduced from 3795 bytes to 2384 bytes with this patch. Fixes: ^1da177e4c3f4 ("Linux-2.6.12-rc2") Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: David Howells <dhowells@redhat.com>
2020-03-15KEYS: reaching the keys quotas correctlyYang Xu
Currently, when we add a new user key, the calltrace as below: add_key() key_create_or_update() key_alloc() __key_instantiate_and_link generic_key_instantiate key_payload_reserve ...... Since commit a08bf91ce28e ("KEYS: allow reaching the keys quotas exactly"), we can reach max bytes/keys in key_alloc, but we forget to remove this limit when we reserver space for payload in key_payload_reserve. So we can only reach max keys but not max bytes when having delta between plen and type->def_datalen. Remove this limit when instantiating the key, so we can keep consistent with key_alloc. Also, fix the similar problem in keyctl_chown_key(). Fixes: 0b77f5bfb45c ("keys: make the keyring quotas controllable through /proc/sys") Fixes: a08bf91ce28e ("KEYS: allow reaching the keys quotas exactly") Cc: stable@vger.kernel.org # 5.0.x Cc: Eric Biggers <ebiggers@google.com> Signed-off-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2020-01-28Merge branch 'next-integrity' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull IMA updates from Mimi Zohar: "Two new features - measuring certificates and querying IMA for a file hash - and three bug fixes: - Measuring certificates is like the rest of IMA, based on policy, but requires loading a custom policy. Certificates loaded onto a keyring, for example during early boot, before a custom policy has been loaded, are queued and only processed after loading the custom policy. - IMA calculates and caches files hashes. Other kernel subsystems, and possibly kernel modules, are interested in accessing these cached file hashes. The bug fixes prevent classifying a file short read (e.g. shutdown) as an invalid file signature, add a missing blank when displaying the securityfs policy rules containing LSM labels, and, lastly, fix the handling of the IMA policy information for unknown LSM labels" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: IMA: Defined delayed workqueue to free the queued keys IMA: Call workqueue functions to measure queued keys IMA: Define workqueue for early boot key measurements IMA: pre-allocate buffer to hold keyrings string ima: ima/lsm policy rule loading logic bug fixes ima: add the ability to query the cached hash of a given file ima: Add a space after printing LSM rules for readability IMA: fix measuring asymmetric keys Kconfig IMA: Read keyrings= option from the IMA policy IMA: Add support to limit measuring keys KEYS: Call the IMA hook to measure keys IMA: Define an IMA hook to measure keys IMA: Add KEY_CHECK func to measure keys IMA: Check IMA policy flag ima: avoid appraise error for hash calc interrupt
2019-12-17security: keys: trusted: fix lost handle flushJames Bottomley
The original code, before it was moved into security/keys/trusted-keys had a flush after the blob unseal. Without that flush, the volatile handles increase in the TPM until it becomes unusable and the system either has to be rebooted or the TPM volatile area manually flushed. Fix by adding back the lost flush, which we now have to export because of the relocation of the trusted key code may cause the consumer to be modular. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Fixes: 2e19e10131a0 ("KEYS: trusted: Move TPM2 trusted keys code") Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-12-12KEYS: remove CONFIG_KEYS_COMPATEric Biggers
KEYS_COMPAT now always takes the value of COMPAT && KEYS. But the security/keys/ directory is only compiled if KEYS is enabled, so in practice KEYS_COMPAT is the same as COMPAT. Therefore, remove the unnecessary KEYS_COMPAT and just use COMPAT directly. (Also remove an outdated comment from compat.c.) Reviewed-by: James Morris <jamorris@linux.microsoft.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-12-12KEYS: Call the IMA hook to measure keysLakshmi Ramasubramanian
Call the IMA hook from key_create_or_update() function to measure the payload when a new key is created or an existing key is updated. This patch adds the call to the IMA hook from key_create_or_update() function to measure the key on key create or update. Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com> Cc: David Howells <dhowells@redhat.com> Cc: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-11-12KEYS: trusted: Remove set but not used variable 'keyhndl'zhengbin
Fixes gcc '-Wunused-but-set-variable' warning: security/keys/trusted-keys/trusted_tpm1.c: In function tpm_unseal: security/keys/trusted-keys/trusted_tpm1.c:588:11: warning: variable keyhndl set but not used [-Wunused-but-set-variable] Fixes: 00aa975bd031 ("KEYS: trusted: Create trusted keys subsystem") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: zhengbin <zhengbin13@huawei.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-11-12KEYS: trusted: Move TPM2 trusted keys codeSumit Garg
Move TPM2 trusted keys code to trusted keys subsystem. The reason being it's better to consolidate all the trusted keys code to a single location so that it can be maintained sanely. Also, utilize existing tpm_send() exported API which wraps the internal tpm_transmit_cmd() API. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-11-12KEYS: trusted: Create trusted keys subsystemSumit Garg
Move existing code to trusted keys subsystem. Also, rename files with "tpm" as suffix which provides the underlying implementation. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-11-12KEYS: Use common tpm_buf for trusted and asymmetric keysSumit Garg
Switch to utilize common heap based tpm_buf code for TPM based trusted and asymmetric keys rather than using stack based tpm1_buf code. Also, remove tpm1_buf code. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-11-12tpm: Move tpm_buf code to include/linux/Sumit Garg
Move tpm_buf code to common include/linux/tpm.h header so that it can be reused via other subsystems like trusted keys etc. Also rename trusted keys and asymmetric keys usage of TPM 1.x buffer implementation to tpm1_buf to avoid any compilation errors. Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sumit Garg <sumit.garg@linaro.org> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-25KEYS: trusted: correctly initialize digests and fix locking issueRoberto Sassu
Commit 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()") modifies tpm_pcr_extend() to accept a digest for each PCR bank. After modification, tpm_pcr_extend() expects that digests are passed in the same order as the algorithms set in chip->allocated_banks. This patch fixes two issues introduced in the last iterations of the patch set: missing initialization of the TPM algorithm ID in the tpm_digest structures passed to tpm_pcr_extend() by the trusted key module, and unreleased locks in the TPM driver due to returning from tpm_pcr_extend() without calling tpm_put_ops(). Cc: stable@vger.kernel.org Fixes: 0b6cf6b97b7e ("tpm: pass an array of tpm_extend_digest structures to tpm_pcr_extend()") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Suggested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-09-05keys: Fix missing null pointer check in request_key_auth_describe()Hillf Danton
If a request_key authentication token key gets revoked, there's a window in which request_key_auth_describe() can see it with a NULL payload - but it makes no check for this and something like the following oops may occur: BUG: Kernel NULL pointer dereference at 0x00000038 Faulting instruction address: 0xc0000000004ddf30 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [...] request_key_auth_describe+0x90/0xd0 LR [...] request_key_auth_describe+0x54/0xd0 Call Trace: [...] request_key_auth_describe+0x54/0xd0 (unreliable) [...] proc_keys_show+0x308/0x4c0 [...] seq_read+0x3d0/0x540 [...] proc_reg_read+0x90/0x110 [...] __vfs_read+0x3c/0x70 [...] vfs_read+0xb4/0x1b0 [...] ksys_read+0x7c/0x130 [...] system_call+0x5c/0x70 Fix this by checking for a NULL pointer when describing such a key. Also make the read routine check for a NULL pointer to be on the safe side. [DH: Modified to not take already-held rcu lock and modified to also check in the read routine] Fixes: 04c567d9313e ("[PATCH] Keys: Fix race between two instantiators of a key") Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Hillf Danton <hdanton@sina.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-30keys: ensure that ->match_free() is called in request_key_and_link()Eric Biggers
If check_cached_key() returns a non-NULL value, we still need to call key_type::match_free() to undo key_type::match_preparse(). Fixes: 7743c48e54ee ("keys: Cache result of request_key*() temporarily in task_struct") Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-08-13KEYS: trusted: allow module init if TPM is inactive or deactivatedRoberto Sassu
Commit c78719203fc6 ("KEYS: trusted: allow trusted.ko to initialize w/o a TPM") allows the trusted module to be loaded even if a TPM is not found, to avoid module dependency problems. However, trusted module initialization can still fail if the TPM is inactive or deactivated. tpm_get_random() returns an error. This patch removes the call to tpm_get_random() and instead extends the PCR specified by the user with zeros. The security of this alternative is equivalent to the previous one, as either option prevents with a PCR update unsealing and misuse of sealed data by a user space process. Even if a PCR is extended with zeros, instead of random data, it is still computationally infeasible to find a value as input for a new PCR extend operation, to obtain again the PCR value that would allow unsealing. Cc: stable@vger.kernel.org Fixes: 240730437deb ("KEYS: trusted: explicitly use tpm_chip structure...") Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Suggested-by: Mimi Zohar <zohar@linux.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-07-18proc/sysctl: add shared variables for range checkMatteo Croce
In the sysctl code the proc_dointvec_minmax() function is often used to validate the user supplied value between an allowed range. This function uses the extra1 and extra2 members from struct ctl_table as minimum and maximum allowed value. On sysctl handler declaration, in every source file there are some readonly variables containing just an integer which address is assigned to the extra1 and extra2 members, so the sysctl range is enforced. The special values 0, 1 and INT_MAX are very often used as range boundary, leading duplication of variables like zero=0, one=1, int_max=INT_MAX in different source files: $ git grep -E '\.extra[12].*&(zero|one|int_max)' |wc -l 248 Add a const int array containing the most commonly used values, some macros to refer more easily to the correct array member, and use them instead of creating a local one for every object file. This is the bloat-o-meter output comparing the old and new binary compiled with the default Fedora config: # scripts/bloat-o-meter -d vmlinux.o.old vmlinux.o add/remove: 2/2 grow/shrink: 0/2 up/down: 24/-188 (-164) Data old new delta sysctl_vals - 12 +12 __kstrtab_sysctl_vals - 12 +12 max 14 10 -4 int_max 16 - -16 one 68 - -68 zero 128 28 -100 Total: Before=20583249, After=20583085, chg -0.00% [mcroce@redhat.com: tipc: remove two unused variables] Link: http://lkml.kernel.org/r/20190530091952.4108-1-mcroce@redhat.com [akpm@linux-foundation.org: fix net/ipv6/sysctl_net_ipv6.c] [arnd@arndb.de: proc/sysctl: make firmware loader table conditional] Link: http://lkml.kernel.org/r/20190617130014.1713870-1-arnd@arndb.de [akpm@linux-foundation.org: fix fs/eventpoll.c] Link: http://lkml.kernel.org/r/20190430180111.10688-1-mcroce@redhat.com Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-10Revert "Merge tag 'keys-acl-20190703' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs" This reverts merge 0f75ef6a9cff49ff612f7ce0578bced9d0b38325 (and thus effectively commits 7a1ade847596 ("keys: Provide KEYCTL_GRANT_PERMISSION") 2e12256b9a76 ("keys: Replace uid/gid/perm permissions checking with an ACL") that the merge brought in). It turns out that it breaks booting with an encrypted volume, and Eric biggers reports that it also breaks the fscrypt tests [1] and loading of in-kernel X.509 certificates [2]. The root cause of all the breakage is likely the same, but David Howells is off email so rather than try to work it out it's getting reverted in order to not impact the rest of the merge window. [1] https://lore.kernel.org/lkml/20190710011559.GA7973@sol.localdomain/ [2] https://lore.kernel.org/lkml/20190710013225.GB7973@sol.localdomain/ Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/ Reported-by: Eric Biggers <ebiggers@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-08Merge tag 'keys-acl-20190703' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring ACL support from David Howells: "This changes the permissions model used by keys and keyrings to be based on an internal ACL by the following means: - Replace the permissions mask internally with an ACL that contains a list of ACEs, each with a specific subject with a permissions mask. Potted default ACLs are available for new keys and keyrings. ACE subjects can be macroised to indicate the UID and GID specified on the key (which remain). Future commits will be able to add additional subject types, such as specific UIDs or domain tags/namespaces. Also split a number of permissions to give finer control. Examples include splitting the revocation permit from the change-attributes permit, thereby allowing someone to be granted permission to revoke a key without allowing them to change the owner; also the ability to join a keyring is split from the ability to link to it, thereby stopping a process accessing a keyring by joining it and thus acquiring use of possessor permits. - Provide a keyctl to allow the granting or denial of one or more permits to a specific subject. Direct access to the ACL is not granted, and the ACL cannot be viewed" * tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Provide KEYCTL_GRANT_PERMISSION keys: Replace uid/gid/perm permissions checking with an ACL
2019-07-08Merge tag 'keys-namespace-20190627' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring namespacing from David Howells: "These patches help make keys and keyrings more namespace aware. Firstly some miscellaneous patches to make the process easier: - Simplify key index_key handling so that the word-sized chunks assoc_array requires don't have to be shifted about, making it easier to add more bits into the key. - Cache the hash value in the key so that we don't have to calculate on every key we examine during a search (it involves a bunch of multiplications). - Allow keying_search() to search non-recursively. Then the main patches: - Make it so that keyring names are per-user_namespace from the point of view of KEYCTL_JOIN_SESSION_KEYRING so that they're not accessible cross-user_namespace. keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEYRING_NAME for this. - Move the user and user-session keyrings to the user_namespace rather than the user_struct. This prevents them propagating directly across user_namespaces boundaries (ie. the KEY_SPEC_* flags will only pick from the current user_namespace). - Make it possible to include the target namespace in which the key shall operate in the index_key. This will allow the possibility of multiple keys with the same description, but different target domains to be held in the same keyring. keyctl_capabilities() shows KEYCTL_CAPS1_NS_KEY_TAG for this. - Make it so that keys are implicitly invalidated by removal of a domain tag, causing them to be garbage collected. - Institute a network namespace domain tag that allows keys to be differentiated by the network namespace in which they operate. New keys that are of a type marked 'KEY_TYPE_NET_DOMAIN' are assigned the network domain in force when they are created. - Make it so that the desired network namespace can be handed down into the request_key() mechanism. This allows AFS, NFS, etc. to request keys specific to the network namespace of the superblock. This also means that the keys in the DNS record cache are thenceforth namespaced, provided network filesystems pass the appropriate network namespace down into dns_query(). For DNS, AFS and NFS are good, whilst CIFS and Ceph are not. Other cache keyrings, such as idmapper keyrings, also need to set the domain tag - for which they need access to the network namespace of the superblock" * tag 'keys-namespace-20190627' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Pass the network namespace into request_key mechanism keys: Network namespace domain tag keys: Garbage collect keys for which the domain has been removed keys: Include target namespace in match criteria keys: Move the user and user-session keyrings to the user_namespace keys: Namespace keyring names keys: Add a 'recurse' flag for keyring searches keys: Cache the hash value to avoid lots of recalculation keys: Simplify key description management
2019-07-08Merge tag 'keys-request-20190626' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull request_key improvements from David Howells: "These are all request_key()-related, including a fix and some improvements: - Fix the lack of a Link permission check on a key found by request_key(), thereby enabling request_key() to link keys that don't grant this permission to the target keyring (which must still grant Write permission). Note that the key must be in the caller's keyrings already to be found. - Invalidate used request_key authentication keys rather than revoking them, so that they get cleaned up immediately rather than hanging around till the expiry time is passed. - Move the RCU locks outwards from the keyring search functions so that a request_key_rcu() can be provided. This can be called in RCU mode, so it can't sleep and can't upcall - but it can be called from LOOKUP_RCU pathwalk mode. - Cache the latest positive result of request_key*() temporarily in task_struct so that filesystems that make a lot of request_key() calls during pathwalk can take advantage of it to avoid having to redo the searching. This requires CONFIG_KEYS_REQUEST_CACHE=y. It is assumed that the key just found is likely to be used multiple times in each step in an RCU pathwalk, and is likely to be reused for the next step too. Note that the cleanup of the cache is done on TIF_NOTIFY_RESUME, just before userspace resumes, and on exit" * tag 'keys-request-20190626' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Kill off request_key_async{,_with_auxdata} keys: Cache result of request_key*() temporarily in task_struct keys: Provide request_key_rcu() keys: Move the RCU locks outwards from the keyring search functions keys: Invalidate used request_key authentication keys keys: Fix request_key() lack of Link perm check on found key
2019-07-08Merge tag 'keys-misc-20190619' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull misc keyring updates from David Howells: "These are some miscellaneous keyrings fixes and improvements: - Fix a bunch of warnings from sparse, including missing RCU bits and kdoc-function argument mismatches - Implement a keyctl to allow a key to be moved from one keyring to another, with the option of prohibiting key replacement in the destination keyring. - Grant Link permission to possessors of request_key_auth tokens so that upcall servicing daemons can more easily arrange things such that only the necessary auth key is passed to the actual service program, and not all the auth keys a daemon might possesss. - Improvement in lookup_user_key(). - Implement a keyctl to allow keyrings subsystem capabilities to be queried. The keyutils next branch has commits to make available, document and test the move-key and capabilities code: https://git.kernel.org/pub/scm/linux/kernel/git/dhowells/keyutils.git/log They're currently on the 'next' branch" * tag 'keys-misc-20190619' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Add capability-checking keyctl function keys: Reuse keyring_index_key::desc_len in lookup_user_key() keys: Grant Link permission to possessers of request_key auth keys keys: Add a keyctl to move a key between keyrings keys: Hoist locking out of __key_link_begin() keys: Break bits out of key_unlink() keys: Change keyring_serialise_link_sem to a mutex keys: sparse: Fix kdoc mismatches keys: sparse: Fix incorrect RCU accesses keys: sparse: Fix key_fs[ug]id_changed()
2019-07-03keys: Provide KEYCTL_GRANT_PERMISSIONDavid Howells
Provide a keyctl() operation to grant/remove permissions. The grant operation, wrapped by libkeyutils, looks like: int ret = keyctl_grant_permission(key_serial_t key, enum key_ace_subject_type type, unsigned int subject, unsigned int perm); Where key is the key to be modified, type and subject represent the subject to which permission is to be granted (or removed) and perm is the set of permissions to be granted. 0 is returned on success. SET_SECURITY permission is required for this. The subject type currently must be KEY_ACE_SUBJ_STANDARD for the moment (other subject types will come along later). For subject type KEY_ACE_SUBJ_STANDARD, the following subject values are available: KEY_ACE_POSSESSOR The possessor of the key KEY_ACE_OWNER The owner of the key KEY_ACE_GROUP The key's group KEY_ACE_EVERYONE Everyone perm lists the permissions to be granted: KEY_ACE_VIEW Can view the key metadata KEY_ACE_READ Can read the key content KEY_ACE_WRITE Can update/modify the key content KEY_ACE_SEARCH Can find the key by searching/requesting KEY_ACE_LINK Can make a link to the key KEY_ACE_SET_SECURITY Can set security KEY_ACE_INVAL Can invalidate KEY_ACE_REVOKE Can revoke KEY_ACE_JOIN Can join this keyring KEY_ACE_CLEAR Can clear this keyring If an ACE already exists for the subject, then the permissions mask will be overwritten; if perm is 0, it will be deleted. Currently, the internal ACL is limited to a maximum of 16 entries. For example: int ret = keyctl_grant_permission(key, KEY_ACE_SUBJ_STANDARD, KEY_ACE_OWNER, KEY_ACE_VIEW | KEY_ACE_READ); Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27keys: Replace uid/gid/perm permissions checking with an ACLDavid Howells
Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-27keys: Pass the network namespace into request_key mechanismDavid Howells
Create a request_key_net() function and use it to pass the network namespace domain tag into DNS revolver keys and rxrpc/AFS keys so that keys for different domains can coexist in the same keyring. Signed-off-by: David Howells <dhowells@redhat.com> cc: netdev@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-afs@lists.infradead.org
2019-06-26keys: Network namespace domain tagDavid Howells
Create key domain tags for network namespaces and make it possible to automatically tag keys that are used by networked services (e.g. AF_RXRPC, AFS, DNS) with the default network namespace if not set by the caller. This allows keys with the same description but in different namespaces to coexist within a keyring. Signed-off-by: David Howells <dhowells@redhat.com> cc: netdev@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-afs@lists.infradead.org
2019-06-26keys: Garbage collect keys for which the domain has been removedDavid Howells
If a key operation domain (such as a network namespace) has been removed then attempt to garbage collect all the keys that use it. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-26keys: Include target namespace in match criteriaDavid Howells
Currently a key has a standard matching criteria of { type, description } and this is used to only allow keys with unique criteria in a keyring. This means, however, that you cannot have keys with the same type and description but a different target namespace in the same keyring. This is a potential problem for a containerised environment where, say, a container is made up of some parts of its mount space involving netfs superblocks from two different network namespaces. This is also a problem for shared system management keyrings such as the DNS records keyring or the NFS idmapper keyring that might contain keys from different network namespaces. Fix this by including a namespace component in a key's matching criteria. Keyring types are marked to indicate which, if any, namespace is relevant to keys of that type, and that namespace is set when the key is created from the current task's namespace set. The capability bit KEYCTL_CAPS1_NS_KEY_TAG is set if the kernel is employing this feature. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-26keys: Move the user and user-session keyrings to the user_namespaceDavid Howells
Move the user and user-session keyrings to the user_namespace struct rather than pinning them from the user_struct struct. This prevents these keyrings from propagating across user-namespaces boundaries with regard to the KEY_SPEC_* flags, thereby making them more useful in a containerised environment. The issue is that a single user_struct may be represent UIDs in several different namespaces. The way the patch does this is by attaching a 'register keyring' in each user_namespace and then sticking the user and user-session keyrings into that. It can then be searched to retrieve them. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jann Horn <jannh@google.com>
2019-06-26keys: Namespace keyring namesDavid Howells
Keyring names are held in a single global list that any process can pick from by means of keyctl_join_session_keyring (provided the keyring grants Search permission). This isn't very container friendly, however. Make the following changes: (1) Make default session, process and thread keyring names begin with a '.' instead of '_'. (2) Keyrings whose names begin with a '.' aren't added to the list. Such keyrings are system specials. (3) Replace the global list with per-user_namespace lists. A keyring adds its name to the list for the user_namespace that it is currently in. (4) When a user_namespace is deleted, it just removes itself from the keyring name list. The global keyring_name_lock is retained for accessing the name lists. This allows (4) to work. This can be tested by: # keyctl newring foo @s 995906392 # unshare -U $ keyctl show ... 995906392 --alswrv 65534 65534 \_ keyring: foo ... $ keyctl session foo Joined session keyring: 935622349 As can be seen, a new session keyring was created. The capability bit KEYCTL_CAPS1_NS_KEYRING_NAME is set if the kernel is employing this feature. Signed-off-by: David Howells <dhowells@redhat.com> cc: Eric W. Biederman <ebiederm@xmission.com>
2019-06-26keys: Add a 'recurse' flag for keyring searchesDavid Howells
Add a 'recurse' flag for keyring searches so that the flag can be omitted and recursion disabled, thereby allowing just the nominated keyring to be searched and none of the children. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-26keys: Cache the hash value to avoid lots of recalculationDavid Howells
Cache the hash of the key's type and description in the index key so that we're not recalculating it every time we look at a key during a search. The hash function does a bunch of multiplications, so evading those is probably worthwhile - especially as this is done for every key examined during a search. This also allows the methods used by assoc_array to get chunks of index-key to be simplified. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-26keys: Simplify key description managementDavid Howells
Simplify key description management by cramming the word containing the length with the first few chars of the description also. This simplifies the code that generates the index-key used by assoc_array. It should speed up key searching a bit too. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-26keys: Kill off request_key_async{,_with_auxdata}David Howells
Kill off request_key_async{,_with_auxdata}() as they're not currently used. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19keys: Cache result of request_key*() temporarily in task_structDavid Howells
If a filesystem uses keys to hold authentication tokens, then it needs a token for each VFS operation that might perform an authentication check - either by passing it to the server, or using to perform a check based on authentication data cached locally. For open files this isn't a problem, since the key should be cached in the file struct since it represents the subject performing operations on that file descriptor. During pathwalk, however, there isn't anywhere to cache the key, except perhaps in the nameidata struct - but that isn't exposed to the filesystems. Further, a pathwalk can incur a lot of operations, calling one or more of the following, for instance: ->lookup() ->permission() ->d_revalidate() ->d_automount() ->get_acl() ->getxattr() on each dentry/inode it encounters - and each one may need to call request_key(). And then, at the end of pathwalk, it will call the actual operation: ->mkdir() ->mknod() ->getattr() ->open() ... which may need to go and get the token again. However, it is very likely that all of the operations on a single dentry/inode - and quite possibly a sequence of them - will all want to use the same authentication token, which suggests that caching it would be a good idea. To this end: (1) Make it so that a positive result of request_key() and co. that didn't require upcalling to userspace is cached temporarily in task_struct. (2) The cache is 1 deep, so a new result displaces the old one. (3) The key is released by exit and by notify-resume. (4) The cache is cleared in a newly forked process. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19keys: Provide request_key_rcu()David Howells
Provide a request_key_rcu() function that can be used to request a key under RCU conditions. It can only search and check permissions; it cannot allocate a new key, upcall or wait for an upcall to complete. It may return a partially constructed key. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19keys: Move the RCU locks outwards from the keyring search functionsDavid Howells
Move the RCU locks outwards from the keyring search functions so that it will become possible to provide an RCU-capable partial request_key() function in a later commit. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19keys: Invalidate used request_key authentication keysDavid Howells
Invalidate used request_key authentication keys rather than revoking them so that they get cleaned up immediately rather than potentially hanging around. There doesn't seem any need to keep the revoked keys around. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19keys: Fix request_key() lack of Link perm check on found keyDavid Howells
The request_key() syscall allows a process to gain access to the 'possessor' permits of any key that grants it Search permission by virtue of request_key() not checking whether a key it finds grants Link permission to the caller. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-19keys: Add capability-checking keyctl functionDavid Howells
Add a keyctl function that requests a set of capability bits to find out what features are supported. Signed-off-by: David Howells <dhowells@redhat.com>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 441Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 315 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190115.503150771@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30keys: Reuse keyring_index_key::desc_len in lookup_user_key()Eric Biggers
When lookup_user_key() checks whether the key is possessed, it should use the key's existing index_key including the 'desc_len' field, rather than recomputing the 'desc_len'. This doesn't change the behavior; this way is just simpler and faster. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com>
2019-05-30keys: Grant Link permission to possessers of request_key auth keysDavid Howells
Grant Link permission to the possessers of request_key authentication keys, thereby allowing a daemon that is servicing upcalls to arrange things such that only the necessary auth key is passed to the actual service program and not all the daemon's pending auth keys. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com>
2019-05-30keys: Add a keyctl to move a key between keyringsDavid Howells
Add a keyctl to atomically move a link to a key from one keyring to another. The key must exist in "from" keyring and a flag can be given to cause the operation to fail if there's a matching key already in the "to" keyring. This can be done with: keyctl(KEYCTL_MOVE, key_serial_t key, key_serial_t from_keyring, key_serial_t to_keyring, unsigned int flags); The key being moved must grant Link permission and both keyrings must grant Write permission. flags should be 0 or KEYCTL_MOVE_EXCL, with the latter preventing displacement of a matching key from the "to" keyring. Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-30keys: Hoist locking out of __key_link_begin()David Howells
Hoist the locking of out of __key_link_begin() and into its callers. This is necessary to allow the upcoming key_move() operation to correctly order taking of the source keyring semaphore, the destination keyring semaphore and the keyring serialisation lock. Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30keys: Break bits out of key_unlink()David Howells
Break bits out of key_unlink() into helper functions so that they can be used in implementing key_move(). Signed-off-by: David Howells <dhowells@redhat.com>
2019-05-30keys: Change keyring_serialise_link_sem to a mutexDavid Howells
Change keyring_serialise_link_sem to a mutex as it's only ever write-locked. Signed-off-by: David Howells <dhowells@redhat.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-18 17:09:02 +0000