aboutsummaryrefslogtreecommitdiffstats
path: root/net/xfrm
AgeCommit message (Collapse)Author
2020-08-03xfrm: policy: match with both mark and mask on user interfacesXin Long
commit 4f47e8ab6ab796b5380f74866fa5287aca4dcc58 upstream. In commit ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list"), it would take 'priority' to make a policy unique, and allow duplicated policies with different 'priority' to be added, which is not expected by userland, as Tobias reported in strongswan. To fix this duplicated policies issue, and also fix the issue in commit ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list"), when doing add/del/get/update on user interfaces, this patch is to change to look up a policy with both mark and mask by doing: mark.v == pol->mark.v && mark.m == pol->mark.m and leave the check: (mark & pol->mark.m) == pol->mark.v for tx/rx path only. As the userland expects an exact mark and mask match to manage policies. v1->v2: - make xfrm_policy_mark_match inline and fix the changelog as Tobias suggested. Fixes: 295fae568885 ("xfrm: Allow user space manipulation of SPD mark") Fixes: ed17b8d377ea ("xfrm: fix a warning in xfrm_policy_insert_list") Reported-by: Tobias Brunner <tobias@strongswan.org> Tested-by: Tobias Brunner <tobias@strongswan.org> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-07-16xfrm: Fix double ESP trailer insertion in IPsec crypto offload.Huy Nguyen
commit 94579ac3f6d0820adc83b5dc5358ead0158101e9 upstream. During IPsec performance testing, we see bad ICMP checksum. The error packet has duplicated ESP trailer due to double validate_xmit_xfrm calls. The first call is from ip_output, but the packet cannot be sent because netif_xmit_frozen_or_stopped is true and the packet gets dev_requeue_skb. The second call is from NET_TX softirq. However after the first call, the packet already has the ESP trailer. Fix by marking the skb with XFRM_XMIT bit after the packet is handled by validate_xmit_xfrm to avoid duplicate ESP trailer insertion. Fixes: f6e27114a60a ("net: Add a xfrm validate function to validate_xmit_skb") Signed-off-by: Huy Nguyen <huyn@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-08xfrm: fix a NULL-ptr deref in xfrm_local_errorXin Long
commit f6a23d85d078c2ffde79c66ca81d0a1dde451649 upstream. This patch is to fix a crash: [ ] kasan: GPF could be caused by NULL-ptr deref or user memory access [ ] general protection fault: 0000 [#1] SMP KASAN PTI [ ] RIP: 0010:ipv6_local_error+0xac/0x7a0 [ ] Call Trace: [ ] xfrm6_local_error+0x1eb/0x300 [ ] xfrm_local_error+0x95/0x130 [ ] __xfrm6_output+0x65f/0xb50 [ ] xfrm6_output+0x106/0x46f [ ] udp_tunnel6_xmit_skb+0x618/0xbf0 [ip6_udp_tunnel] [ ] vxlan_xmit_one+0xbc6/0x2c60 [vxlan] [ ] vxlan_xmit+0x6a0/0x4276 [vxlan] [ ] dev_hard_start_xmit+0x165/0x820 [ ] __dev_queue_xmit+0x1ff0/0x2b90 [ ] ip_finish_output2+0xd3e/0x1480 [ ] ip_do_fragment+0x182d/0x2210 [ ] ip_output+0x1d0/0x510 [ ] ip_send_skb+0x37/0xa0 [ ] raw_sendmsg+0x1b4c/0x2b80 [ ] sock_sendmsg+0xc0/0x110 This occurred when sending a v4 skb over vxlan6 over ipsec, in which case skb->protocol == htons(ETH_P_IPV6) while skb->sk->sk_family == AF_INET in xfrm_local_error(). Then it will go to xfrm6_local_error() where it tries to get ipv6 info from a ipv4 sk. This issue was actually fixed by Commit 628e341f319f ("xfrm: make local error reporting more robust"), but brought back by Commit 844d48746e4b ("xfrm: choose protocol family by skb protocol"). So to fix it, we should call xfrm6_local_error() only when skb->protocol is htons(ETH_P_IPV6) and skb->sk->sk_family is AF_INET6. Fixes: 844d48746e4b ("xfrm: choose protocol family by skb protocol") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-08xfrm: fix a warning in xfrm_policy_insert_listXin Long
commit ed17b8d377eaf6b4a01d46942b4c647378a79bdd upstream. This waring can be triggered simply by: # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 1 mark 0 mask 0x10 #[1] # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 2 mark 0 mask 0x1 #[2] # ip xfrm policy update src 192.168.1.1/24 dst 192.168.1.2/24 dir in \ priority 2 mark 0 mask 0x10 #[3] Then dmesg shows: [ ] WARNING: CPU: 1 PID: 7265 at net/xfrm/xfrm_policy.c:1548 [ ] RIP: 0010:xfrm_policy_insert_list+0x2f2/0x1030 [ ] Call Trace: [ ] xfrm_policy_inexact_insert+0x85/0xe50 [ ] xfrm_policy_insert+0x4ba/0x680 [ ] xfrm_add_policy+0x246/0x4d0 [ ] xfrm_user_rcv_msg+0x331/0x5c0 [ ] netlink_rcv_skb+0x121/0x350 [ ] xfrm_netlink_rcv+0x66/0x80 [ ] netlink_unicast+0x439/0x630 [ ] netlink_sendmsg+0x714/0xbf0 [ ] sock_sendmsg+0xe2/0x110 The issue was introduced by Commit 7cb8a93968e3 ("xfrm: Allow inserting policies with matching mark and different priorities"). After that, the policies [1] and [2] would be able to be added with different priorities. However, policy [3] will actually match both [1] and [2]. Policy [1] was matched due to the 1st 'return true' in xfrm_policy_mark_match(), and policy [2] was matched due to the 2nd 'return true' in there. It caused WARN_ON() in xfrm_policy_insert_list(). This patch is to fix it by only (the same value and priority) as the same policy in xfrm_policy_mark_match(). Thanks to Yuehaibing, we could make this fix better. v1->v2: - check policy->mark.v == pol->mark.v only without mask. Fixes: 7cb8a93968e3 ("xfrm: Allow inserting policies with matching mark and different priorities") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-08xfrm interface: fix oops when deleting a x-netns interfaceNicolas Dichtel
commit c95c5f58b35ef995f66cb55547eee6093ab5fcb8 upstream. Here is the steps to reproduce the problem: ip netns add foo ip netns add bar ip -n foo link add xfrmi0 type xfrm dev lo if_id 42 ip -n foo link set xfrmi0 netns bar ip netns del foo ip netns del bar Which results to: [ 186.686395] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bd3: 0000 [#1] SMP PTI [ 186.687665] CPU: 7 PID: 232 Comm: kworker/u16:2 Not tainted 5.6.0+ #1 [ 186.688430] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 [ 186.689420] Workqueue: netns cleanup_net [ 186.689903] RIP: 0010:xfrmi_dev_uninit+0x1b/0x4b [xfrm_interface] [ 186.690657] Code: 44 f6 ff ff 31 c0 5b 5d 41 5c 41 5d 41 5e c3 48 8d 8f c0 08 00 00 8b 05 ce 14 00 00 48 8b 97 d0 08 00 00 48 8b 92 c0 0e 00 00 <48> 8b 14 c2 48 8b 02 48 85 c0 74 19 48 39 c1 75 0c 48 8b 87 c0 08 [ 186.692838] RSP: 0018:ffffc900003b7d68 EFLAGS: 00010286 [ 186.693435] RAX: 000000000000000d RBX: ffff8881b0f31000 RCX: ffff8881b0f318c0 [ 186.694334] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000246 RDI: ffff8881b0f31000 [ 186.695190] RBP: ffffc900003b7df0 R08: ffff888236c07740 R09: 0000000000000040 [ 186.696024] R10: ffffffff81fce1b8 R11: 0000000000000002 R12: ffffc900003b7d80 [ 186.696859] R13: ffff8881edcc6a40 R14: ffff8881a1b6e780 R15: ffffffff81ed47c8 [ 186.697738] FS: 0000000000000000(0000) GS:ffff888237dc0000(0000) knlGS:0000000000000000 [ 186.698705] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 186.699408] CR2: 00007f2129e93148 CR3: 0000000001e0a000 CR4: 00000000000006e0 [ 186.700221] Call Trace: [ 186.700508] rollback_registered_many+0x32b/0x3fd [ 186.701058] ? __rtnl_unlock+0x20/0x3d [ 186.701494] ? arch_local_irq_save+0x11/0x17 [ 186.702012] unregister_netdevice_many+0x12/0x55 [ 186.702594] default_device_exit_batch+0x12b/0x150 [ 186.703160] ? prepare_to_wait_exclusive+0x60/0x60 [ 186.703719] cleanup_net+0x17d/0x234 [ 186.704138] process_one_work+0x196/0x2e8 [ 186.704652] worker_thread+0x1a4/0x249 [ 186.705087] ? cancel_delayed_work+0x92/0x92 [ 186.705620] kthread+0x105/0x10f [ 186.706000] ? __kthread_bind_mask+0x57/0x57 [ 186.706501] ret_from_fork+0x35/0x40 [ 186.706978] Modules linked in: xfrm_interface nfsv3 nfs_acl auth_rpcgss nfsv4 nfs lockd grace fscache sunrpc button parport_pc parport serio_raw evdev pcspkr loop ext4 crc16 mbcache jbd2 crc32c_generic 8139too ide_cd_mod cdrom ide_gd_mod ata_generic ata_piix libata scsi_mod piix psmouse i2c_piix4 ide_core 8139cp i2c_core mii floppy [ 186.710423] ---[ end trace 463bba18105537e5 ]--- The problem is that x-netns xfrm interface are not removed when the link netns is removed. This causes later this oops when thoses interfaces are removed. Let's add a handler to remove all interfaces related to a netns when this netns is removed. Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Reported-by: Christophe Gouault <christophe.gouault@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-08xfrm: call xfrm_output_gso when inner_protocol is set in xfrm_outputXin Long
commit a204aef9fd77dce1efd9066ca4e44eede99cd858 upstream. An use-after-free crash can be triggered when sending big packets over vxlan over esp with esp offload enabled: [] BUG: KASAN: use-after-free in ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0 [] Call Trace: [] dump_stack+0x75/0xa0 [] kasan_report+0x37/0x50 [] ipv6_gso_pull_exthdrs.part.8+0x32c/0x4e0 [] ipv6_gso_segment+0x2c8/0x13c0 [] skb_mac_gso_segment+0x1cb/0x420 [] skb_udp_tunnel_segment+0x6b5/0x1c90 [] inet_gso_segment+0x440/0x1380 [] skb_mac_gso_segment+0x1cb/0x420 [] esp4_gso_segment+0xae8/0x1709 [esp4_offload] [] inet_gso_segment+0x440/0x1380 [] skb_mac_gso_segment+0x1cb/0x420 [] __skb_gso_segment+0x2d7/0x5f0 [] validate_xmit_skb+0x527/0xb10 [] __dev_queue_xmit+0x10f8/0x2320 <--- [] ip_finish_output2+0xa2e/0x1b50 [] ip_output+0x1a8/0x2f0 [] xfrm_output_resume+0x110e/0x15f0 [] __xfrm4_output+0xe1/0x1b0 [] xfrm4_output+0xa0/0x200 [] iptunnel_xmit+0x5a7/0x920 [] vxlan_xmit_one+0x1658/0x37a0 [vxlan] [] vxlan_xmit+0x5e4/0x3ec8 [vxlan] [] dev_hard_start_xmit+0x125/0x540 [] __dev_queue_xmit+0x17bd/0x2320 <--- [] ip6_finish_output2+0xb20/0x1b80 [] ip6_output+0x1b3/0x390 [] ip6_xmit+0xb82/0x17e0 [] inet6_csk_xmit+0x225/0x3d0 [] __tcp_transmit_skb+0x1763/0x3520 [] tcp_write_xmit+0xd64/0x5fe0 [] __tcp_push_pending_frames+0x8c/0x320 [] tcp_sendmsg_locked+0x2245/0x3500 [] tcp_sendmsg+0x27/0x40 As on the tx path of vxlan over esp, skb->inner_network_header would be set on vxlan_xmit() and xfrm4_tunnel_encap_add(), and the later one can overwrite the former one. It causes skb_udp_tunnel_segment() to use a wrong skb->inner_network_header, then the issue occurs. This patch is to fix it by calling xfrm_output_gso() instead when the inner_protocol is set, in which gso_segment of inner_protocol will be done first. While at it, also improve some code around. Fixes: 7862b4058b9f ("esp: Add gso handlers for esp4 and esp6") Reported-by: Xiumei Mu <xmu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-08xfrm: do pskb_pull properly in __xfrm_transport_prepXin Long
commit 06a0afcfe2f551ff755849ea2549b0d8409fd9a0 upstream. For transport mode, when ipv6 nexthdr is set, the packet format might be like: ---------------------------------------------------- | | dest | | | | ESP | ESP | | IP6 hdr| opts.| ESP | TCP | Data | Trailer | ICV | ---------------------------------------------------- and in __xfrm_transport_prep(): pskb_pull(skb, skb->mac_len + sizeof(ip6hdr) + x->props.header_len); it will pull the data pointer to the wrong position, as it missed the nexthdrs/dest opts. This patch is to fix it by using: pskb_pull(skb, skb_transport_offset(skb) + x->props.header_len); as we can be sure transport_header points to ESP header at that moment. It also fixes a panic when packets with ipv6 nexthdr are sent over esp6 transport mode: [ 100.473845] kernel BUG at net/core/skbuff.c:4325! [ 100.478517] RIP: 0010:__skb_to_sgvec+0x252/0x260 [ 100.494355] Call Trace: [ 100.494829] skb_to_sgvec+0x11/0x40 [ 100.495492] esp6_output_tail+0x12e/0x550 [esp6] [ 100.496358] esp6_xmit+0x1d5/0x260 [esp6_offload] [ 100.498029] validate_xmit_xfrm+0x22f/0x2e0 [ 100.499604] __dev_queue_xmit+0x589/0x910 [ 100.502928] ip6_finish_output2+0x2a5/0x5a0 [ 100.503718] ip6_output+0x6c/0x120 [ 100.505198] xfrm_output_resume+0x4bf/0x530 [ 100.508683] xfrm6_output+0x3a/0xc0 [ 100.513446] inet6_csk_xmit+0xa1/0xf0 [ 100.517335] tcp_sendmsg+0x27/0x40 [ 100.517977] sock_sendmsg+0x3e/0x60 [ 100.518648] __sys_sendto+0xee/0x160 Fixes: c35fe4106b92 ("xfrm: Add mode handlers for IPsec on layer 2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-06-08xfrm: allow to accept packets with ipv6 NEXTHDR_HOP in xfrm_inputXin Long
commit afcaf61be9d1dbdee5ec186d1dcc67b6b692180f upstream. For beet mode, when it's ipv6 inner address with nexthdrs set, the packet format might be: ---------------------------------------------------- | outer | | dest | | | ESP | ESP | | IP hdr | ESP | opts.| TCP | Data | Trailer | ICV | ---------------------------------------------------- The nexthdr from ESP could be NEXTHDR_HOP(0), so it should continue processing the packet when nexthdr returns 0 in xfrm_input(). Otherwise, when ipv6 nexthdr is set, the packet will be dropped. I don't see any error cases that nexthdr may return 0. So fix it by removing the check for nexthdr == 0. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21xfrm: policy: Fix doulbe free in xfrm_policy_timerYueHaibing
commit 4c59406ed00379c8663f8663d82b2537467ce9d7 upstream. After xfrm_add_policy add a policy, its ref is 2, then xfrm_policy_timer read_lock xp->walk.dead is 0 .... mod_timer() xfrm_policy_kill policy->walk.dead = 1 .... del_timer(&policy->timer) xfrm_pol_put //ref is 1 xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu xfrm_pol_hold //ref is 1 read_unlock xfrm_pol_put //ref is 0 xfrm_policy_destroy call_rcu xfrm_policy_destroy is called twice, which may leads to double free. Call Trace: RIP: 0010:refcount_warn_saturate+0x161/0x210 ... xfrm_policy_timer+0x522/0x600 call_timer_fn+0x1b3/0x5e0 ? __xfrm_decode_session+0x2990/0x2990 ? msleep+0xb0/0xb0 ? _raw_spin_unlock_irq+0x24/0x40 ? __xfrm_decode_session+0x2990/0x2990 ? __xfrm_decode_session+0x2990/0x2990 run_timer_softirq+0x5c5/0x10e0 Fix this by use write_lock_bh in xfrm_policy_kill. Fixes: ea2dea9dacc2 ("xfrm: remove policy lock when accessing policy->walk.dead") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Timo Teräs <timo.teras@iki.fi> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21xfrm: add the missing verify_sec_ctx_len check in xfrm_add_acquireXin Long
commit a1a7e3a36e01ca6e67014f8cf673cb8e47be5550 upstream. Without doing verify_sec_ctx_len() check in xfrm_add_acquire(), it may be out-of-bounds to access uctx->ctx_str with uctx->ctx_len, as noticed by syz: BUG: KASAN: slab-out-of-bounds in selinux_xfrm_alloc_user+0x237/0x430 Read of size 768 at addr ffff8880123be9b4 by task syz-executor.1/11650 Call Trace: dump_stack+0xe8/0x16e print_address_description.cold.3+0x9/0x23b kasan_report.cold.4+0x64/0x95 memcpy+0x1f/0x50 selinux_xfrm_alloc_user+0x237/0x430 security_xfrm_policy_alloc+0x5c/0xb0 xfrm_policy_construct+0x2b1/0x650 xfrm_add_acquire+0x21d/0xa10 xfrm_user_rcv_msg+0x431/0x6f0 netlink_rcv_skb+0x15a/0x410 xfrm_netlink_rcv+0x6d/0x90 netlink_unicast+0x50e/0x6a0 netlink_sendmsg+0x8ae/0xd40 sock_sendmsg+0x133/0x170 ___sys_sendmsg+0x834/0x9a0 __sys_sendmsg+0x100/0x1e0 do_syscall_64+0xe5/0x660 entry_SYSCALL_64_after_hwframe+0x6a/0xdf So fix it by adding the missing verify_sec_ctx_len check there. Fixes: 980ebd25794f ("[IPSEC]: Sync series - acquire insert") Reported-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21xfrm: fix uctx len check in verify_sec_ctx_lenXin Long
commit 171d449a028573b2f0acdc7f31ecbb045391b320 upstream. It's not sufficient to do 'uctx->len != (sizeof(struct xfrm_user_sec_ctx) + uctx->ctx_len)' check only, as uctx->len may be greater than nla_len(rt), in which case it will cause slab-out-of-bounds when accessing uctx->ctx_str later. This patch is to fix it by return -EINVAL when uctx->len > nla_len(rt). Fixes: df71837d5024 ("[LSM-IPSec]: Security association restriction.") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-05-21xfrm: handle NETDEV_UNREGISTER for xfrm deviceRaed Salem
commit 03891f820c2117b19e80b370281eb924a09cf79f upstream. This patch to handle the asynchronous unregister device event so the device IPsec offload resources could be cleanly released. Fixes: e4db5b61c572 ("xfrm: policy: remove pcpu policy cache") Signed-off-by: Raed Salem <raeds@mellanox.com> Reviewed-by: Boris Pismenny <borisp@mellanox.com> Reviewed-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-16xfrm: interface: do not confirm neighbor when do pmtu updateXu Wang
commit 8aaea2b0428b6aad7c7e22d3fddc31a78bb1d724 upstream. When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-04-16xfrm interface: fix packet tx through bpf_redirect()Nicolas Dichtel
commit f042365dbffea98fb8148c98c700402e8d099f02 upstream. With an ebpf program that redirects packets through a xfrm interface, packets are dropped because no dst is attached to skb. This could also be reproduced with an AF_PACKET socket, with the following python script (xfrm1 is a xfrm interface): import socket send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0) # scapy # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request') # raw(p) req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00' send_s.sendto(req, ('xfrm1', 0x800, 0, 0)) It was also not possible to send an ip packet through an AF_PACKET socket because a LL header was expected. Let's remove those LL header constraints. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-01-19xfrm: release device reference for invalid stateXiaodong Xu
commit 4944a4b1077f74d89073624bd286219d2fcbfce3 upstream. An ESP packet could be decrypted in async mode if the input handler for this packet returns -EINPROGRESS in xfrm_input(). At this moment the device reference in skb is held. Later xfrm_input() will be invoked again to resume the processing. If the transform state is still valid it would continue to release the device reference and there won't be a problem; however if the transform state is not valid when async resumption happens, the packet will be dropped while the device reference is still being held. When the device is deleted for some reason and the reference to this device is not properly released, the kernel will keep logging like: unregister_netdevice: waiting for ppp2 to become free. Usage count = 1 The issue is observed when running IPsec traffic over a PPPoE device based on a bridge interface. By terminating the PPPoE connection on the server end for multiple times, the PPPoE device on the client side will eventually get stuck on the above warning message. This patch will check the async mode first and continue to release device reference in async resumption, before it is dropped due to invalid state. v2: Do not assign address family from outer_mode in the transform if the state is invalid v3: Release device reference in the error path instead of jumping to resume Fixes: 4ce3dbe397d7b ("xfrm: Fix xfrm_input() to verify state is valid when (encap_type < 0)") Signed-off-by: Xiaodong Xu <stid.smth@gmail.com> Reported-by: Bo Chen <chenborfc@163.com> Tested-by: Bo Chen <chenborfc@163.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-01-19xfrm: Fix memleak on xfrm state destroySteffen Klassert
commit 86c6739eda7d2a03f2db30cbee67a5fb81afa8ba upstream. We leak the page that we use to create skb page fragments when destroying the xfrm_state. Fix this by dropping a page reference if a page was assigned to the xfrm_state. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Reported-by: JD <jdtxs00@gmail.com> Reported-by: Paul Wouters <paul@nohats.ca> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2019-10-01xfrm: policy: avoid warning splat when merging nodesFlorian Westphal
[ Upstream commit 769a807d0b41df4201dbeb01c22eaeb3e5905532 ] syzbot reported a splat: xfrm_policy_inexact_list_reinsert+0x625/0x6e0 net/xfrm/xfrm_policy.c:877 CPU: 1 PID: 6756 Comm: syz-executor.1 Not tainted 5.3.0-rc2+ #57 Call Trace: xfrm_policy_inexact_node_reinsert net/xfrm/xfrm_policy.c:922 [inline] xfrm_policy_inexact_node_merge net/xfrm/xfrm_policy.c:958 [inline] xfrm_policy_inexact_insert_node+0x537/0xb50 net/xfrm/xfrm_policy.c:1023 xfrm_policy_inexact_alloc_chain+0x62b/0xbd0 net/xfrm/xfrm_policy.c:1139 xfrm_policy_inexact_insert+0xe8/0x1540 net/xfrm/xfrm_policy.c:1182 xfrm_policy_insert+0xdf/0xce0 net/xfrm/xfrm_policy.c:1574 xfrm_add_policy+0x4cf/0x9b0 net/xfrm/xfrm_user.c:1670 xfrm_user_rcv_msg+0x46b/0x720 net/xfrm/xfrm_user.c:2676 netlink_rcv_skb+0x1f0/0x460 net/netlink/af_netlink.c:2477 xfrm_netlink_rcv+0x74/0x90 net/xfrm/xfrm_user.c:2684 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x809/0x9a0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0xa70/0xd30 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg net/socket.c:657 [inline] There is no reproducer, however, the warning can be reproduced by adding rules with ever smaller prefixes. The sanity check ("does the policy match the node") uses the prefix value of the node before its updated to the smaller value. To fix this, update the prefix earlier. The bug has no impact on tree correctness, this is only to prevent a false warning. Reported-by: syzbot+8cc27ace5f6972910b31@syzkaller.appspotmail.com Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-09-06xfrm/xfrm_policy: fix dst dev null pointer dereference in collect_md modeHangbin Liu
[ Upstream commit c3b4c3a47e05d5fecf7354d75824a9d1b37f3e84 ] In decode_session{4,6} there is a possibility that the skb dst dev is NULL, e,g, with tunnel collect_md mode, which will cause kernel crash. Here is what the code path looks like, for GRE: - ip6gre_tunnel_xmit - ip6gre_xmit_ipv6 - __gre6_xmit - ip6_tnl_xmit - if skb->len - t->tun_hlen - eth_hlen > mtu; return -EMSGSIZE - icmpv6_send - icmpv6_route_lookup - xfrm_decode_session_reverse - decode_session4 - oif = skb_dst(skb)->dev->ifindex; <-- here - decode_session6 - oif = skb_dst(skb)->dev->ifindex; <-- here The reason is __metadata_dst_init() init dst->dev to NULL by default. We could not fix it in __metadata_dst_init() as there is no dev supplied. On the other hand, the skb_dst(skb)->dev is actually not needed as we called decode_session{4,6} via xfrm_decode_session_reverse(), so oif is not used by: fl4->flowi4_oif = reverse ? skb->skb_iif : oif; So make a dst dev check here should be clean and safe. v4: No changes. v3: No changes. v2: fix the issue in decode_session{4,6} instead of updating shared dst dev in {ip_md, ip6}_tunnel_xmit. Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Tested-by: Jonathan Lemon <jonathan.lemon@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-04xfrm: policy: fix bydst hlist corruption on hash rebuildFlorian Westphal
commit fd709721352dd5239056eacaded00f2244e6ef58 upstream. syzbot reported following spat: BUG: KASAN: use-after-free in __write_once_size include/linux/compiler.h:221 BUG: KASAN: use-after-free in hlist_del_rcu include/linux/rculist.h:455 BUG: KASAN: use-after-free in xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318 Write of size 8 at addr ffff888095e79c00 by task kworker/1:3/8066 Workqueue: events xfrm_hash_rebuild Call Trace: __write_once_size include/linux/compiler.h:221 [inline] hlist_del_rcu include/linux/rculist.h:455 [inline] xfrm_hash_rebuild+0xa0d/0x1000 net/xfrm/xfrm_policy.c:1318 process_one_work+0x814/0x1130 kernel/workqueue.c:2269 Allocated by task 8064: __kmalloc+0x23c/0x310 mm/slab.c:3669 kzalloc include/linux/slab.h:742 [inline] xfrm_hash_alloc+0x38/0xe0 net/xfrm/xfrm_hash.c:21 xfrm_policy_init net/xfrm/xfrm_policy.c:4036 [inline] xfrm_net_init+0x269/0xd60 net/xfrm/xfrm_policy.c:4120 ops_init+0x336/0x420 net/core/net_namespace.c:130 setup_net+0x212/0x690 net/core/net_namespace.c:316 The faulting address is the address of the old chain head, free'd by xfrm_hash_resize(). In xfrm_hash_rehash(), chain heads get re-initialized without any hlist_del_rcu: for (i = hmask; i >= 0; i--) INIT_HLIST_HEAD(odst + i); Then, hlist_del_rcu() gets called on the about to-be-reinserted policy when iterating the per-net list of policies. hlist_del_rcu() will then make chain->first be nonzero again: static inline void __hlist_del(struct hlist_node *n) { struct hlist_node *next = n->next; // address of next element in list struct hlist_node **pprev = n->pprev;// location of previous elem, this // can point at chain->first WRITE_ONCE(*pprev, next); // chain->first points to next elem if (next) next->pprev = pprev; Then, when we walk chainlist to find insertion point, we may find a non-empty list even though we're supposedly reinserting the first policy to an empty chain. To fix this first unlink all exact and inexact policies instead of zeroing the list heads. Add the commands equivalent to the syzbot reproducer to xfrm_policy.sh, without fix KASAN catches the corruption as it happens, SLUB poisoning detects it a bit later. Reported-by: syzbot+0165480d4ef07360eeda@syzkaller.appspotmail.com Fixes: 1548bc4e0512 ("xfrm: policy: delete inexact policies from inexact list on hash rebuild") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-26ipsec: select crypto ciphers for xfrm_algoArnd Bergmann
[ Upstream commit 597179b0ba550bd83fab1a9d57c42a9343c58514 ] kernelci.org reports failed builds on arc because of what looks like an old missed 'select' statement: net/xfrm/xfrm_algo.o: In function `xfrm_probe_algs': xfrm_algo.c:(.text+0x1e8): undefined reference to `crypto_has_ahash' I don't see this in randconfig builds on other architectures, but it's fairly clear we want to select the hash code for it, like we do for all its other users. As Herbert points out, CRYPTO_BLKCIPHER is also required even though it has not popped up in build tests. Fixes: 17bc19702221 ("ipsec: Use skcipher and ahash when probing algorithms") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26xfrm: fix sa selector validationNicolas Dichtel
[ Upstream commit b8d6d0079757cbd1b69724cfd1c08e2171c68cee ] After commit b38ff4075a80, the following command does not work anymore: $ ip xfrm state add src 10.125.0.2 dst 10.125.0.1 proto esp spi 34 reqid 1 \ mode tunnel enc 'cbc(aes)' 0xb0abdba8b782ad9d364ec81e3a7d82a1 auth-trunc \ 'hmac(sha1)' 0xe26609ebd00acb6a4d51fca13e49ea78a72c73e6 96 flag align4 In fact, the selector is not mandatory, allow the user to provide an empty selector. Fixes: b38ff4075a80 ("xfrm: Fix xfrm sel prefix length validation") CC: Anirudh Gupta <anirudh.gupta@sophos.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-07-26xfrm: Fix xfrm sel prefix length validationAnirudh Gupta
[ Upstream commit b38ff4075a80b4da5cb2202d7965332ca0efb213 ] Family of src/dst can be different from family of selector src/dst. Use xfrm selector family to validate address prefix length, while verifying new sa from userspace. Validated patch with this command: ip xfrm state add src 1.1.6.1 dst 1.1.6.2 proto esp spi 4260196 \ reqid 20004 mode tunnel aead "rfc4106(gcm(aes))" \ 0x1111016400000000000000000000000044440001 128 \ sel src 1011:1:4::2/128 sel dst 1021:1:4::2/128 dev Port5 Fixes: 07bf7908950a ("xfrm: Validate address prefix lengths in the xfrm selector.") Signed-off-by: Anirudh Gupta <anirudh.gupta@sophos.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 335Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 111 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190530000436.567572064@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21Merge tag 'spdx-5.2-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull SPDX update from Greg KH: "Here is a series of patches that add SPDX tags to different kernel files, based on two different things: - SPDX entries are added to a bunch of files that we missed a year ago that do not have any license information at all. These were either missed because the tool saw the MODULE_LICENSE() tag, or some EXPORT_SYMBOL tags, and got confused and thought the file had a real license, or the files have been added since the last big sweep, or they were Makefile/Kconfig files, which we didn't touch last time. - Add GPL-2.0-only or GPL-2.0-or-later tags to files where our scan tools can determine the license text in the file itself. Where this happens, the license text is removed, in order to cut down on the 700+ different ways we have in the kernel today, in a quest to get rid of all of these. These patches have been out for review on the linux-spdx@vger mailing list, and while they were created by automatic tools, they were hand-verified by a bunch of different people, all whom names are on the patches are reviewers. The reason for these "large" patches is if we were to continue to progress at the current rate of change in the kernel, adding license tags to individual files in different subsystems, we would be finished in about 10 years at the earliest. There will be more series of these types of patches coming over the next few weeks as the tools and reviewers crunch through the more "odd" variants of how to say "GPLv2" that developers have come up with over the years, combined with other fun oddities (GPL + a BSD disclaimer?) that are being unearthed, with the goal for the whole kernel to be cleaned up. These diffstats are not small, 3840 files are touched, over 10k lines removed in just 24 patches" * tag 'spdx-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (24 commits) treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 25 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 24 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 23 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 22 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 21 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 20 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 19 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 17 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 15 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 14 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 13 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 12 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 11 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 10 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 9 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 7 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 5 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 4 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 3 ...
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for more missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-16xfrm: ressurrect "Fix uninitialized memory read in _decode_session4"Florian Westphal
This resurrects commit 8742dc86d0c7a9628 ("xfrm4: Fix uninitialized memory read in _decode_session4"), which got lost during a merge conflict resolution between ipsec-next and net-next tree. c53ac41e3720 ("xfrm: remove decode_session indirection from afinfo_policy") in ipsec-next moved the (buggy) _decode_session4 from net/ipv4/xfrm4_policy.c to net/xfrm/xfrm_policy.c. In mean time, 8742dc86d0c7a was applied to ipsec.git and fixed the problem in the "old" location. When the trees got merged, the moved, old function was kept. This applies the "lost" commit again, to the new location. Fixes: a658a3f2ecbab ("Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-05-06Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Ingo Molnar: "This cycle had the following changes: - Timer tracing improvements (Anna-Maria Gleixner) - Continued tasklet reduction work: remove the hrtimer_tasklet (Thomas Gleixner) - Fix CPU hotplug remove race in the tick-broadcast mask handling code (Thomas Gleixner) - Force upper bound for setting CLOCK_REALTIME, to fix ABI inconsistencies with handling values that are close to the maximum supported and the vagueness of when uptime related wraparound might occur. Make the consistent maximum the year 2232 across all relevant ABIs and APIs. (Thomas Gleixner) - various cleanups and smaller fixes" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Fix typos in comments tick/broadcast: Fix warning about undefined tick_broadcast_oneshot_offline() timekeeping: Force upper bound for setting CLOCK_REALTIME timer/trace: Improve timer tracing timer/trace: Replace deprecated vsprintf pointer extension %pf by %ps timer: Move trace point to get proper index tick/sched: Update tick_sched struct documentation tick: Remove outgoing CPU from broadcast masks timekeeping: Consistently use unsigned int for seqcount snapshot softirq: Remove tasklet_hrtimer xfrm: Replace hrtimer tasklet with softirq hrtimer mac80211_hwsim: Replace hrtimer tasklet with softirq hrtimer
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three trivial overlapping conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2019-04-30 1) A lot of work to remove indirections from the xfrm code. From Florian Westphal. 2) Support ESP offload in combination with gso partial. From Boris Pismenny. 3) Remove some duplicated code from vti4. From Jeremy Sowden. Please note that there is merge conflict between commit: 8742dc86d0c7 ("xfrm4: Fix uninitialized memory read in _decode_session4") from the ipsec tree and commit: c53ac41e3720 ("xfrm: remove decode_session indirection from afinfo_policy") from the ipsec-next tree. The merge conflict will appear when those trees get merged during the merge window. The conflict can be solved as it is done in linux-next: https://lkml.org/lkml/2019/4/25/1207 Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-27netlink: make validation more configurable for future strictnessJohannes Berg
We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23xfrm: remove unneeded export_symbolsFlorian Westphal
None of them have any external callers, make them static. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-23xfrm: remove decode_session indirection from afinfo_policyFlorian Westphal
No external dependencies, might as well handle this directly. xfrm_afinfo_policy is now 40 bytes on x86_64. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-23xfrm: remove init_path indirection from afinfo_policyFlorian Westphal
handle this directly, its only used by ipv6. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-23xfrm: remove tos indirection from afinfo_policyFlorian Westphal
Only used by ipv4, we can read the fl4 tos value directly instead. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-15xfrm: kconfig: make xfrm depend on inetFlorian Westphal
when CONFIG_INET is not enabled: net/xfrm/xfrm_output.c: In function ‘xfrm4_tunnel_encap_add’: net/xfrm/xfrm_output.c:234:2: error: implicit declaration of function ‘ip_select_ident’ [-Werror=implicit-function-declaration] ip_select_ident(dev_net(dst->dev), skb, NULL); XFRM only supports ipv4 and ipv6 so change dependency to INET and place user-visible options (pfkey sockets, migrate support and the like) under 'if INET' guard as well. Fixes: 1de70830066b7 ("xfrm: remove output2 indirection from xfrm_mode") Reported-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: store xfrm_mode directly, not its addressFlorian Westphal
This structure is now only 4 bytes, so its more efficient to cache a copy rather than its address. No significant size difference in allmodconfig vmlinux. With non-modular kernel that has all XFRM options enabled, this series reduces vmlinux image size by ~11kb. All xfrm_mode indirections are gone and all modes are built-in. before (ipsec-next master): text data bss dec filename 21071494 7233140 11104324 39408958 vmlinux.master after this series: 21066448 7226772 11104324 39397544 vmlinux.patched With allmodconfig kernel, the size increase is only 362 bytes, even all the xfrm config options removed in this series are modular. before: text data bss dec filename 15731286 6936912 4046908 26715106 vmlinux.master after this series: 15731492 6937068 4046908 26715468 vmlinux Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: make xfrm modes builtinFlorian Westphal
after previous changes, xfrm_mode contains no function pointers anymore and all modules defining such struct contain no code except an init/exit functions to register the xfrm_mode struct with the xfrm core. Just place the xfrm modes core and remove the modules, the run-time xfrm_mode register/unregister functionality is removed. Before: text data bss dec filename 7523 200 2364 10087 net/xfrm/xfrm_input.o 40003 628 440 41071 net/xfrm/xfrm_state.o 15730338 6937080 4046908 26714326 vmlinux 7389 200 2364 9953 net/xfrm/xfrm_input.o 40574 656 440 41670 net/xfrm/xfrm_state.o 15730084 6937068 4046908 26714060 vmlinux The xfrm*_mode_{transport,tunnel,beet} modules are gone. v2: replace CONFIG_INET6_XFRM_MODE_* IS_ENABLED guards with CONFIG_IPV6 ones rather than removing them. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove afinfo pointer from xfrm_modeFlorian Westphal
Adds an EXPORT_SYMBOL for afinfo_get_rcu, as it will now be called from ipv6 in case of CONFIG_IPV6=m. This change has virtually no effect on vmlinux size, but it reduces afinfo size and allows followup patch to make xfrm modes const. v2: mark if (afinfo) tests as likely (Sabrina) re-fetch afinfo according to inner_mode in xfrm_prepare_input(). Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove output2 indirection from xfrm_modeFlorian Westphal
similar to previous patch: no external module dependencies, so we can avoid the indirection by placing this in the core. This change removes the last indirection from xfrm_mode and the xfrm4|6_mode_{beet,tunnel}.c modules contain (almost) no code anymore. Before: text data bss dec hex filename 3957 136 0 4093 ffd net/xfrm/xfrm_output.o 587 44 0 631 277 net/ipv4/xfrm4_mode_beet.o 649 32 0 681 2a9 net/ipv4/xfrm4_mode_tunnel.o 625 44 0 669 29d net/ipv6/xfrm6_mode_beet.o 599 32 0 631 277 net/ipv6/xfrm6_mode_tunnel.o After: text data bss dec hex filename 5359 184 0 5543 15a7 net/xfrm/xfrm_output.o 171 24 0 195 c3 net/ipv4/xfrm4_mode_beet.o 171 24 0 195 c3 net/ipv4/xfrm4_mode_tunnel.o 172 24 0 196 c4 net/ipv6/xfrm6_mode_beet.o 172 24 0 196 c4 net/ipv6/xfrm6_mode_tunnel.o v2: fold the *encap_add functions into xfrm*_prepare_output preserve (move) output2 comment (Sabrina) use x->outer_mode->encap, not inner fix a build breakage on ppc (kbuild robot) Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove input2 indirection from xfrm_modeFlorian Westphal
No external dependencies on any module, place this in the core. Increase is about 1800 byte for xfrm_input.o. The beet helpers get added to internal header, as they can be reused from xfrm_output.c in the next patch (kernel contains several copies of them in the xfrm{4,6}_mode_beet.c files). Before: text data bss dec filename 5578 176 2364 8118 net/xfrm/xfrm_input.o 1180 64 0 1244 net/ipv4/xfrm4_mode_beet.o 171 40 0 211 net/ipv4/xfrm4_mode_transport.o 1163 40 0 1203 net/ipv4/xfrm4_mode_tunnel.o 1083 52 0 1135 net/ipv6/xfrm6_mode_beet.o 172 40 0 212 net/ipv6/xfrm6_mode_ro.o 172 40 0 212 net/ipv6/xfrm6_mode_transport.o 1056 40 0 1096 net/ipv6/xfrm6_mode_tunnel.o After: text data bss dec filename 7373 200 2364 9937 net/xfrm/xfrm_input.o 587 44 0 631 net/ipv4/xfrm4_mode_beet.o 171 32 0 203 net/ipv4/xfrm4_mode_transport.o 649 32 0 681 net/ipv4/xfrm4_mode_tunnel.o 625 44 0 669 net/ipv6/xfrm6_mode_beet.o 172 32 0 204 net/ipv6/xfrm6_mode_ro.o 172 32 0 204 net/ipv6/xfrm6_mode_transport.o 599 32 0 631 net/ipv6/xfrm6_mode_tunnel.o v2: pass inner_mode to xfrm_inner_mode_encap_remove to fix AF_UNSPEC selector breakage (bisected by Benedict Wong) Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove xmit indirection from xfrm_modeFlorian Westphal
There are only two versions (tunnel and transport). The ip/ipv6 versions are only differ in sizeof(iphdr) vs ipv6hdr. Place this in the core and use x->outer_mode->encap type to call the correct adjustment helper. Before: text data bss dec filename 15730311 6937008 4046908 26714227 vmlinux After: 15730428 6937008 4046908 26714344 vmlinux (about 117 byte increase) v2: use family from x->outer_mode, not inner Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove output indirection from xfrm_modeFlorian Westphal
Same is input indirection. Only exception: we need to export xfrm_outer_mode_output for pktgen. Increases size of vmlinux by about 163 byte: Before: text data bss dec filename 15730208 6936948 4046908 26714064 vmlinux After: 15730311 6937008 4046908 26714227 vmlinux xfrm_inner_extract_output has no more external callers, make it static. v2: add IS_ENABLED(IPV6) guard in xfrm6_prepare_output add two missing breaks in xfrm_outer_mode_output (Sabrina Dubroca) add WARN_ON_ONCE for 'call AF_INET6 related output function, but CONFIG_IPV6=n' case. make xfrm_inner_extract_output static Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove input indirection from xfrm_modeFlorian Westphal
No need for any indirection or abstraction here, both functions are pretty much the same and quite small, they also have no external dependencies. xfrm_prepare_input can then be made static. With allmodconfig build, size increase of vmlinux is 25 byte: Before: text data bss dec filename 15730207 6936924 4046908 26714039 vmlinux After: 15730208 6936948 4046908 26714064 vmlinux v2: Fix INET_XFRM_MODE_TRANSPORT name in is-enabled test (Sabrina Dubroca) change copied comment to refer to transport and network header, not skb->{h,nh}, which don't exist anymore. (Sabrina) make xfrm_prepare_input static (Eyal Birger) Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: prefer family stored in xfrm_mode structFlorian Westphal
Now that we have the family available directly in the xfrm_mode struct, we can use that and avoid one extra dereference. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: place af number into xfrm_mode structFlorian Westphal
This will be useful to know if we're supposed to decode ipv4 or ipv6. While at it, make the unregister function return void, all module_exit functions did just BUG(); there is never a point in doing error checks if there is no way to handle such error. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-03-27xfrm: Honor original L3 slave device in xfrmi policy lookupMartin Willi
If an xfrmi is associated to a vrf layer 3 master device, xfrm_policy_check() fails after traffic decapsulation. The input interface is replaced by the layer 3 master device, and hence xfrmi_decode_session() can't match the xfrmi anymore to satisfy policy checking. Extend ingress xfrmi lookup to honor the original layer 3 slave device, allowing xfrm interfaces to operate within a vrf domain. Fixes: f203b76d7809 ("xfrm: Add virtual xfrm interfaces") Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-26 03:14:20 +0000