summaryrefslogtreecommitdiffstats
path: root/net/mac80211
AgeCommit message (Collapse)Author
2013-01-16mac80211: add encrypt headroom to PERR framesBob Copeland
Mesh PERR action frames are robust and thus may be encrypted, so add proper head/tailroom to allow this. Fixes this warning when operating a Mesh STA on ath5k: WARNING: at net/mac80211/wpa.c:427 ccmp_encrypt_skb.isra.5+0x7b/0x1a0 [mac80211]() Call Trace: [<c011c5e7>] warn_slowpath_common+0x63/0x78 [<c011c60b>] warn_slowpath_null+0xf/0x13 [<e090621d>] ccmp_encrypt_skb.isra.5+0x7b/0x1a0 [mac80211] [<e090685c>] ieee80211_crypto_ccmp_encrypt+0x1f/0x37 [mac80211] [<e0917113>] invoke_tx_handlers+0xcad/0x10bd [mac80211] [<e0917665>] ieee80211_tx+0x87/0xb3 [mac80211] [<e0918932>] ieee80211_tx_pending+0xcc/0x170 [mac80211] [<c0121c43>] tasklet_action+0x3e/0x65 Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16mac80211: set NEED_TXPROCESSING for PERR framesBob Copeland
A user reported warnings in ath5k due to transmitting frames with no rates set up. The frames were Mesh PERR frames, and some debugging showed an empty control block with just the vif pointer: > [ 562.522682] XXX txinfo: 00000000: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 ................ > [ 562.522688] XXX txinfo: 00000010: 00 00 00 00 00 00 00 00 54 b8 f2 > db 00 00 00 00 ........T....... > [ 562.522693] XXX txinfo: 00000020: 00 00 00 00 00 00 00 00 00 00 00 > 00 00 00 00 00 ................ Set the IEEE80211_TX_INTFL_NEED_TXPROCESSING flag to ensure that rate control gets run before the frame is sent. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16mac80211: fix monitor mode injectionFelix Fietkau
Channel contexts are not always used with monitor interfaces. If no channel context is set, use the oper channel, otherwise tx fails. Signed-off-by: Felix Fietkau <nbd@openwrt.org> [check local->use_chanctx] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16mac80211: synchronize scan off/on-channel and PS statesStanislaw Gruszka
Since: commit b23b025fe246f3acc2988eb6d400df34c27cb8ae Author: Ben Greear <greearb@candelatech.com> Date: Fri Feb 4 11:54:17 2011 -0800 mac80211: Optimize scans on current operating channel. we do not disable PS while going back to operational channel (on ieee80211_scan_state_suspend) and deffer that until scan finish. But since we are allowed to send frames, we can send a frame to AP without PM bit set, so disable PS on AP side. Then when we switch to off-channel (in ieee80211_scan_state_resume) we do not enable PS. Hence we are off-channel with PS disabled, frames are not buffered by AP. To fix remove offchannel_ps_disable argument and always enable PS when going off-channel and disable it when going on-channel, like it was before. Cc: stable@vger.kernel.org # 2.6.39+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Tested-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-16mac80211: fix FT roamingJohannes Berg
During FT roaming, wpa_supplicant attempts to set the key before association. This used to be rejected, but as a side effect of my commit 66e67e418908442389d3a9e ("mac80211: redesign auth/assoc") the key was accepted causing hardware crypto to not be used for it as the station isn't added to the driver yet. It would be possible to accept the key and then add it to the driver when the station has been added. However, this may run into issues with drivers using the state- based station adding if they accept the key only after association like it used to be. For now, revert to the behaviour from before the auth and assoc change. Cc: stable@vger.kernel.org Reported-by: Cédric Debarge <cedric.debarge@acksys.fr> Tested-by: Cédric Debarge <cedric.debarge@acksys.fr> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: fix maximum MTUChaitanya
The maximum MTU shouldn't take the headers into account, the maximum MSDU size is exactly the maximum MTU. Signed-off-by: T Krishna Chaitanya <chaitanyatk@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: fix dtim_period in hidden SSID AP associationJohannes Berg
When AP's SSID is hidden the BSS can appear several times in cfg80211's BSS list: once with a zero-length SSID that comes from the beacon, and once for each SSID from probe reponses. Since the mac80211 stores its data in ieee80211_bss which is embedded into cfg80211_bss, mac80211's data will be duplicated too. This becomes a problem when a driver needs the dtim_period since this data exists only in the beacon's instance in cfg80211 bss table which isn't the instance that is used when associating. Remove the DTIM period from the BSS table and track it explicitly to avoid this problem. Cc: stable@vger.kernel.org Tested-by: Efi Tubul <efi.tubul@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: use del_timer_sync for final sta cleanup timer deletionJohannes Berg
This is a very old bug, but there's nothing that prevents the timer from running while the module is being removed when we only do del_timer() instead of del_timer_sync(). The timer should normally not be running at this point, but it's not clearly impossible (or we could just remove this.) Cc: stable@vger.kernel.org Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: fix station destruction in AP/mesh modesJohannes Berg
Unfortunately, commit b22cfcfcae5b, intended to speed up roaming by avoiding the synchronize_rcu() broke AP/mesh modes as it moved some code into that work item that will still call into the driver at a time where it's no longer expected to handle this: after the AP or mesh has been stopped. To fix this problem remove the per-station work struct, maintain a station cleanup list instead and flush this list when stations are flushed. To keep this patch smaller for stable, do this when the stations are flushed (sta_info_flush()). This unfortunately brings back the original roaming delay; I'll fix that again in a separate patch. Also, Ben reported that the original commit could sometimes (with many interfaces) cause long delays when an interface is set down, due to blocking on flush_workqueue(). Since we now maintain the cleanup list, this particular change of the original patch can be reverted. Cc: stable@vger.kernel.org [3.7] Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: RMC buckets are just list headsThomas Pedersen
The array of rmc_entrys is redundant since only the list_head is used. Make this an array of list_heads instead and save ~6k per vif at runtime :D Signed-off-by: Thomas Pedersen <thomas@cozybit.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: assign VLAN channel contextsJohannes Berg
Make AP_VLAN type interfaces track the AP master channel context so they have one assigned for the various lookups. Don't give them their own refcount etc. since they're just slaves to the AP master. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: flush AP_VLAN stations when tearing down the BSS APFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> [change to flush stations with AP flush in second loop] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-01-03mac80211: fix ibss scanningStanislaw Gruszka
Do not scan on no-IBSS and disabled channels in IBSS mode. Doing this can trigger Microcode errors on iwlwifi and iwlegacy drivers. Also rename ieee80211_request_internal_scan() function since it is only used in IBSS mode and simplify calling it from ieee80211_sta_find_ibss(). This patch should address: https://bugzilla.redhat.com/show_bug.cgi?id=883414 https://bugzilla.kernel.org/show_bug.cgi?id=49411 Reported-by: Jesse Kahtava <jesse_kahtava@f-m.fm> Reported-by: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-13Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial branch from Jiri Kosina: "Usual stuff -- comment/printk typo fixes, documentation updates, dead code elimination." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits) HOWTO: fix double words typo x86 mtrr: fix comment typo in mtrr_bp_init propagate name change to comments in kernel source doc: Update the name of profiling based on sysfs treewide: Fix typos in various drivers treewide: Fix typos in various Kconfig wireless: mwifiex: Fix typo in wireless/mwifiex driver messages: i2o: Fix typo in messages/i2o scripts/kernel-doc: check that non-void fcts describe their return value Kernel-doc: Convention: Use a "Return" section to describe return values radeon: Fix typo and copy/paste error in comments doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c various: Fix spelling of "asynchronous" in comments. Fix misspellings of "whether" in comments. eisa: Fix spelling of "asynchronous". various: Fix spelling of "registered" in comments. doc: fix quite a few typos within Documentation target: iscsi: fix comment typos in target/iscsi drivers treewide: fix typo of "suport" in various comments and Kconfig treewide: fix typo of "suppport" in various comments ...
2012-12-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-12-11Merge branch 'for-john' of git://git.sipsolutions.net/mac80211-nextJohn W. Linville
2012-12-11net: remove obsolete simple_strto<foo>Abhijit Pawar
This patch removes the redundant occurences of simple_strto<foo> Signed-off-by: Abhijit Pawar <abhi.c.pawar@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-10minstrel: update stats after processing statusJohannes Berg
Instead of updating stats before sending a packet, update them after processing the packet's status. This makes minstrel in line with minstrel_ht. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-10mac80211: a few whitespace fixesJohannes Berg
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-10net: remove obsolete simple_strto<foo>Abhijit Pawar
This patch replace the obsolete simple_strto<foo> with kstrto<foo> Signed-off-by: Abhijit Pawar <abhi.c.pawar@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-07mac80211: warn only once if ampdu_action isn't assignedChaitanya
New drivers that might not support ampdu_action yet while in development cause a lot of warnings, use WARN_ON_ONCE instead. Signed-off-by: T Krushna Chaitanya <chaitanyatk@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-06Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/mwifiex/sta_ioctl.c net/mac80211/scan.c
2012-12-06Merge tag 'nfc-fixes-3.7-2' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-3.0 This is an NFC LLCP fix for 3.7 and contains only one patch. It fixes a potential crash when receiving an LLCP HDLC frame acking a frame that is not the last sent one. In that case we may dereference an already freed pointer.
2012-12-06mac80211: cancel work instead of waiting for it to do nothingJohannes Berg
If the sdata work is pending while the interface is stopped, we currently flush it. If it's not running this means waiting for it to run, which could take a while if the workqueue is backlogged. However, the work exits right away if it starts to run while the interface is already stopping. There's no point in waiting for that, so use cancel_work_sync() instead. Reported-by: Ben Greear <greearb@candelatech.com> Tested-by: Ben Greear <greearb@candelatech.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-06mac80211: don't drop mesh peering frames from unknown STAMarco Porsch
Previously, mesh peering frames from a STA without a station entry were being dropped. Mesh Peering Open and other frames (WLAN_CATEGORY_SELF_PROTECTED) are valid mesh peering frames even if received from a yet unknown station; the STA entry will be created in mesh_peer_init later. The problem didn't occur previously since both STAs receive each other's beacons which created the STA entry. However, this causes an unnecessary delay and beacons might not be received if either node is in PS mode. Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> [reword commit log a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-05mac80211: skip radiotap space calculation if no monitor existsHelmut Schaa
The radiotap header length "needed_headroom" is only required if we're sending the skb to a monitor interface. Hence, move the calculation a bit later so the calculation can be skipped if no monitor interface is present. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-05mac80211: introduce IEEE80211_HW_TEARDOWN_AGGR_ON_BAR_FAILStanislaw Gruszka
Commit f0425beda4d404a6e751439b562100b902ba9c98 "mac80211: retry sending failed BAR frames later instead of tearing down aggr" caused regression on rt2x00 hardware (connection hangs). This regression was fixed by commit be03d4a45c09ee5100d3aaaedd087f19bc20d01 "rt2x00: Don't let mac80211 send a BAR when an AMPDU subframe fails". But the latter commit caused yet another problem reported in https://bugzilla.kernel.org/show_bug.cgi?id=42828#c22 After long discussion in this thread: http://mid.gmane.org/20121018075615.GA18212@redhat.com and testing various alternative solutions, which failed on one or other setup, we have no other good fix for the issues like just revert both mentioned earlier commits. To do not affect other hardware which benefit from commit f0425beda4d404a6e751439b562100b902ba9c98, instead of reverting it, introduce flag that when used will restore mac80211 behaviour before the commit. Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> [replaced link with mid.gmane.org that has message-id] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-05mac80211: add debug file for mic failureSaravana
The mic failure count provides the number of mic failures that have happened on a given key (without a countermeasure being started, since that would remove the key). Signed-off-by: Saravana <saravanad@posedge.com> [fix NULL pointer issues] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-04mac80211: adapt slot time in IBSS modeSimon Wunderlich
In 5GHz/802.11a, we are allowed to use short slot times. Doing this may increases performance by 20% for legacy connections (54 MBit/s). I can confirm this in my tests (27% more throughput using iperf), and also have a small positive effect (5% more throughput) for HT rates, tested on 1 stream. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Mathias Kretschmer <mathias.kretschmer@fokus.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-03mac80211: return if CSA is not handleSimon Wunderlich
If channel contexts are enabled, the CSA should not be processed further. A return is missing here. Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30mac80211: simplify loop in minstrel_htJohannes Berg
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30cfg80211: fix BSS struct IE access racesJohannes Berg
When a BSS struct is updated, the IEs are currently overwritten or freed. This can lead to races if some other CPU is accessing the BSS struct and using the IEs concurrently. Fix this by always allocating the IEs in a new struct that holds the data and length and protecting access to this new struct with RCU. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30mac80211: remove probe response temporary buffer allocationJohannes Berg
Instead of allocating a temporary buffer to build IEs build them right into the SKB. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30mac80211: make ieee80211_build_preq_ies saferJohannes Berg
Instead of assuming 200 bytes are always enough for all the IEs we add, give the length of the buffer to the function and warn instead of overrunning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30mac80211: allow userspace registration for probe requests in IBSSAntonio Quartulli
This change allows userspace to register for probe request frames on an IBSS interface. Userspace then has to handle them and send replies. Signed-off-by: Antonio Quartulli <antonio@open-mesh.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-30mac80211: fix for mesh sync to indicate TBTT adjustmentMarco Porsch
Currently the mesh sync code checks, whether peers indicate TBTT adjustment, but it never sets the corresponding flag itself. By setting ifmsh->tbtt_adjusting to true, it will set the corresponding field in the mesh configuration IE of own beacons. This indication will be set in the current beacon. The TBTT adjustment will be performed afterwards, affecting the next beacon. Thus, the first beacon with stable TBTT will not indicate adjustment anymore and peers will continue tracking the new offset. Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-29mac80211: add debugfs file for last rx rateSaravana
Add a debugfs file showing the rate at which the last packet is received. Signed-off-by: Saravana <saravanad@posedge.com> [fix whitespace] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-29mac80211: re-organize the rx rate calculation logicSaravana
Currently the logic to fill a struct rate_info with a STA's last RX rate is accessible only in the cfg.c. As the RX rate calculation might be needed elsewhere, split this out into a separate function. Signed-off-by: Saravana <saravanad@posedge.com> [fix various whitespace issues, reword commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-29mac80211: add debugfs file for current tx rateSaravana
Add a debugfs file showing the current tx rate. The information available in the rc_stats file doesn't evidently provides us the current tx rate. This patch adds the support for the same. Signed-off-by: Saravana <saravanad@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-29mac80211: add debugfs file for last ack signalSaravana
Add a debugfs file showing the signal strength of the ack frame that is received for the currently sent tx packet Signed-off-by: Saravana <saravanad@posedge.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-28mac80211: don't reinit rate control when mesh sta existsHelmut Schaa
This fixes some unintended resets of the rate control statistics when minstrel_ht is used resulting in non-optimal throughput on mesh links. Tested-by: Emanuel Taube <emanuel.taube@gmail.com> Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-28mac80211: reject setting masked mac addressesHelmut Schaa
If a driver registers an address mask we should ensure that no interface gets an address assigned that isn't covered by the registered address mask. This prevents invalid configurations from reaching the device and causing problems. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> [change function flow to reduce indentation, fix locking] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-28mac80211: fix potential NULL dereferenceDan Carpenter
Smatch complains that we could dereference skb later in the function. It's probably unlikely, but we may as well return here and avoid it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> [change summary] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-27mac80211: support P2P GO powersave configurationJohannes Berg
If the low-level driver wants to support P2P GO powersave configuration, it must set the cfg80211 flags and mac80211 will pass the parameters to it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-27mac80211: support (partial) VHT radiotap informationJohannes Berg
Add some information that we have about VHT to radiotap. This at least lets one see the MCS and NSS information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-27mac80211: support VHT associationJohannes Berg
Determine the VHT channel from the AP's VHT operation IE (if present) and configure the hardware to that channel if it is supported. If channel contexts cause a channel to not be usable, try a smaller bandwidth. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-11-26mac80211: fix remain-on-channel (non-)cancellingJohannes Berg
Felix Liao reported that when an interface is set DOWN while another interface is executing a ROC, the warning in ieee80211_start_next_roc() (about the first item on the list having started already) triggers. This is because ieee80211_roc_purge() calls it even if it never actually changed the list of ROC items. To fix this, simply remove the function call. If it is needed then it will be done by the ieee80211_sw_roc_work() function when the ROC item that is being removed while active is cleaned up. Cc: stable@vger.kernel.org Reported-by: Felix Liao <Felix.Liao@watchguard.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-11-26mac80211: support VHT rates in TX infoJohannes Berg
To achieve this, limit the number of retries to 31 (instead of 255) and use the three bits that are then free for VHT flags. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26mac80211: support drivers reporting VHT RXJohannes Berg
Add support to mac80211 for having drivers report received VHT MCS information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-09 11:11:36 +0000