summaryrefslogtreecommitdiffstats
path: root/kernel/rcutree_trace.c
AgeCommit message (Collapse)Author
2013-05-05rcutrace: single_open() leaksAl Viro
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-26rcu: Make RCU_FAST_NO_HZ take advantage of numbered callbacksPaul E. McKenney
Because RCU callbacks are now associated with the number of the grace period that they must wait for, CPUs can now take advance callbacks corresponding to grace periods that ended while a given CPU was in dyntick-idle mode. This eliminates the need to try forcing the RCU state machine while entering idle, thus reducing the CPU intensiveness of RCU_FAST_NO_HZ, which should increase its energy efficiency. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-16rcu: Separate accounting of callbacks from callback-free CPUsPaul E. McKenney
Currently, callback invocations from callback-free CPUs are accounted to the CPU that registered the callback, but using the same field that is used for normal callbacks. This makes it impossible to determine from debugfs output whether callbacks are in fact being diverted. This commit therefore adds a separate ->n_nocbs_invoked field in the rcu_data structure in which diverted callback invocations are counted. RCU's debugfs tracing still displays normal callback invocations using ci=, but displayed diverted callbacks with nci=. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-16rcu: Add callback-free CPUsPaul E. McKenney
RCU callback execution can add significant OS jitter and also can degrade both scheduling latency and, in asymmetric multiprocessors, energy efficiency. This commit therefore adds the ability for selected CPUs ("rcu_nocbs=" boot parameter) to have their callbacks offloaded to kthreads. If the "rcu_nocb_poll" boot parameter is also specified, these kthreads will do polling, removing the need for the offloaded CPUs to do wakeups. At least one CPU must be doing normal callback processing: currently CPU 0 cannot be selected as a no-CBs CPU. In addition, attempts to offline the last normal-CBs CPU will fail. This feature was inspired by Jim Houston's and Joe Korty's JRCU, and this commit includes fixes to problems located by Fengguang Wu's kbuild test robot. [ paulmck: Added gfp.h include file as suggested by Fengguang Wu. ] Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: Add tracing for synchronize_sched_expedited()Paul E. McKenney
This commit adds a per-RCU-flavor "rcuexp" file that dumps out statistics for synchonize_sched_expedited(). Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: Remove old debugfs interfaces and also RCU flavor nameMichael Wang
This commit removes the old debugfs interfaces, so that the new directory-per-RCU-flavor versions remain. Because the RCU flavor is given by the directory name, there is no need to print it out, so remove the name from the printout. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: split 'rcuhier' to each flavorMichael Wang
This patch add new 'rcuhier' to each flavor's folder, now we could use: 'cat /debugfs/rcu/rsp/rcuhier' to get the selected rsp info. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: split 'rcugp' to each flavorMichael Wang
This patch add new 'rcugp' to each flavor's folder, now we could use: 'cat /debugfs/rcu/rsp/rcugp' to get the selected rsp info. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: split 'rcuboost' to each flavorMichael Wang
This patch add new 'rcuboost' to each flavor's folder, now we could use: 'cat /debugfs/rcu/rsp/rcuboost' to get the selected rsp info. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: split 'rcubarrier' to each flavorMichael Wang
This patch add new 'rcubarrier' to each flavor's folder, now we could use: 'cat /debugfs/rcu/rsp/rcubarrier' to get the selected rsp info. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: Fix tracing formattingPaul E. McKenney
The rcu_state structure's ->completed field is unsigned long, so this commit adjusts show_one_rcugp()'s printf() format to suit. Also add the required ACCESS_ONCE() directives while we are in this function. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: Remove the interface "rcudata.csv"Michael Wang
This patch removes the interface "rcudata.csv" since it is apparently not used. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: Replace the old interface with the new oneMichael Wang
This patch removed the old RCU debugfs interface and replaced it with the new one. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: Optimize the 'rcu_pending' for RCU traceMichael Wang
This patch implements the new 'rcu_pending' interface under each rsp directory, by using the 'CPU units sequence reading', thus avoiding loss of tracing data. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: Optimize the 'rcudata.csv' for RCU traceMichael Wang
This patch implements the new 'rcudata.csv' interface under each rsp directory, by using the 'CPU units sequence reading', thus avoiding loss of tracing data. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: Optimize the 'rcudata' for RCU traceMichael Wang
This patch implements the new 'rcudata' interface under each rsp directory, by using the 'CPU units sequence reading', thus avoiding loss of tracing data. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: Fundamental facility for 'CPU units sequence reading'Michael Wang
This patch add the fundamental facility used by the following patches, so we can implement the 'CPU units sequence reading' later. This helps us avoid losing data when there are too many CPUs and too small of a buffer, since this new approach allows userspace to read out the data one CPU at a time. Thus, if the buffer is not large enough, userspace will get whatever CPUs fit, and can then issue another read for the remainder of the data. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-11-08rcu: Create directory for each flavor of rcuMichael Wang
This patch will create subdirectory according to each flavor of rcu, the new structure will be: /debugfs/rcu/ -> rsp_0 -> rsp_1 -> ... So we can go to '/debugfs/rcu/rsp_0' and get the cpu info of rsp_0 there. The flavors of RCU are currently rcu_bh, rcu_preempt, and rcu_sched. Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-09-25Merge remote-tracking branch 'tip/smp/hotplug' into next.2012.09.25bPaul E. McKenney
The conflicts between kernel/rcutree.h and kernel/rcutree_plugin.h were due to adjacent insertions and deletions, which were resolved by simply accepting the changes on both branches.
2012-09-24Merge branches 'bigrt.2012.09.23a', 'doctorture.2012.09.23a', ↵Paul E. McKenney
'fixes.2012.09.23a', 'hotplug.2012.09.23a' and 'idlechop.2012.09.23a' into HEAD bigrt.2012.09.23a contains additional commits to reduce scheduling latency from RCU on huge systems (many hundrends or thousands of CPUs). doctorture.2012.09.23a contains documentation changes and rcutorture fixes. fixes.2012.09.23a contains miscellaneous fixes. hotplug.2012.09.23a contains CPU-hotplug-related changes. idle.2012.09.23a fixes architectures for which RCU no longer considered the idle loop to be a quiescent state due to earlier adaptive-dynticks changes. Affected architectures are alpha, cris, frv, h8300, m32r, m68k, mn10300, parisc, score, xtensa, and ia64.
2012-09-23rcu: Remove _rcu_barrier() dependency on __stop_machine()Paul E. McKenney
Currently, _rcu_barrier() relies on preempt_disable() to prevent any CPU from going offline, which in turn depends on CPU hotplug's use of __stop_machine(). This patch therefore makes _rcu_barrier() use get_online_cpus() to block CPU-hotplug operations. This has the added benefit of removing the need for _rcu_barrier() to adopt callbacks: Because CPU-hotplug operations are excluded, there can be no callbacks to adopt. This commit simplifies the code accordingly. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23rcu: Simplify quiescent-state detectionPaul E. McKenney
The current quiescent-state detection algorithm is needlessly complex. It records the grace-period number corresponding to the quiescent state at the time of the quiescent state, which works, but it seems better to simply erase any record of previous quiescent states at the time that the CPU notices the new grace period. This has the further advantage of removing another piece of RCU for which lockless reasoning is required. Therefore, this commit makes this change. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-09-23rcu: Adjust debugfs tracing for kthread-based quiescent-state forcingPaul E. McKenney
Moving quiescent-state forcing into a kthread dispenses with the need for the ->n_rp_need_fqs field, so this commit removes it. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-08-13rcu: Use smp_hotplug_thread facility for RCUs per-CPU kthreadPaul E. McKenney
Bring RCU into the new-age CPU-hotplug fold by modifying RCU's per-CPU kthread code to use the new smp_hotplug_thread facility. [ tglx: Adapted it to use callbacks and to the simplified rcu yield ] Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20120716103948.673354828@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-06rcu: Fix broken strings in RCU's source code.Paul E. McKenney
Although the C language allows you to break strings across lines, doing this makes it hard for people to find the Linux kernel code corresponding to a given console message. This commit therefore fixes broken strings throughout RCU's source code. Suggested-by: Josh Triplett <josh@joshtriplett.org> Suggested-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-07-02rcu: Use for_each_rcu_flavor() in TREE_RCU tracingPaul E. McKenney
This commit applies the new for_each_rcu_flavor() macro to the kernel/rcutree_trace.c file. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-07-02rcu: Add rcu_barrier() statistics to debugfs tracingPaul E. McKenney
This commit adds an rcubarrier file to RCU's debugfs statistical tracing directory, providing diagnostic information on rcu_barrier(). Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2012-07-02rcu: Control RCU_FANOUT_LEAF from boot-time parameterPaul E. McKenney
Although making RCU_FANOUT_LEAF a kernel configuration parameter rather than a fixed constant makes it easier for people to decrease cache-miss overhead for large systems, it is of little help for people who must run a single pre-built kernel binary. This commit therefore allows the value of RCU_FANOUT_LEAF to be increased (but not decreased!) via a boot-time parameter named rcutree.rcu_fanout_leaf. Reported-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-05-09rcu: Make rcu_barrier() less disruptivePaul E. McKenney
The rcu_barrier() primitive interrupts each and every CPU, registering a callback on every CPU. Once all of these callbacks have been invoked, rcu_barrier() knows that every callback that was registered before the call to rcu_barrier() has also been invoked. However, there is no point in registering a callback on a CPU that currently has no callbacks, most especially if that CPU is in a deep idle state. This commit therefore makes rcu_barrier() avoid interrupting CPUs that have no callbacks. Doing this requires reworking the handling of orphaned callbacks, otherwise callbacks could slip through rcu_barrier()'s net by being orphaned from a CPU that rcu_barrier() had not yet interrupted to a CPU that rcu_barrier() had already interrupted. This reworking was needed anyway to take a first step towards weaning RCU from the CPU_DYING notifier's use of stop_cpu(). Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-02-21rcu: Rework detection of use of RCU by offline CPUsPaul E. McKenney
Because newly offlined CPUs continue executing after completing the CPU_DYING notifiers, they legitimately enter the scheduler and use RCU while appearing to be offline. This calls for a more sophisticated approach as follows: 1. RCU marks the CPU online during the CPU_UP_PREPARE phase. 2. RCU marks the CPU offline during the CPU_DEAD phase. 3. Diagnostics regarding use of read-side RCU by offline CPUs use RCU's accounting rather than the cpu_online_map. (Note that __call_rcu() still uses cpu_online_map to detect illegal invocations within CPU_DYING notifiers.) 4. Offline CPUs are prevented from hanging the system by force_quiescent_state(), which pays attention to cpu_online_map. Some additional work (in a later commit) will be needed to guarantee that force_quiescent_state() waits a full jiffy before assuming that a CPU is offline, for example, when called from idle entry. (This commit also makes the one-jiffy wait explicit, since the old-style implicit wait can now be defeated by RCU_FAST_NO_HZ and by rcutorture.) This approach avoids the false positives encountered when attempting to use more exact classification of CPU online/offline state. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2012-02-21rcu: Avoid waking up CPUs having only kfree_rcu() callbacksPaul E. McKenney
When CONFIG_RCU_FAST_NO_HZ is enabled, RCU will allow a given CPU to enter dyntick-idle mode even if it still has RCU callbacks queued. RCU avoids system hangs in this case by scheduling a timer for several jiffies in the future. However, if all of the callbacks on that CPU are from kfree_rcu(), there is no reason to wake the CPU up, as it is not a problem to defer freeing of memory. This commit therefore tracks the number of callbacks on a given CPU that are from kfree_rcu(), and avoids scheduling the timer if all of a given CPU's callbacks are from kfree_rcu(). Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-12-11rcu: Track idleness independent of idle tasksPaul E. McKenney
Earlier versions of RCU used the scheduling-clock tick to detect idleness by checking for the idle task, but handled idleness differently for CONFIG_NO_HZ=y. But there are now a number of uses of RCU read-side critical sections in the idle task, for example, for tracing. A more fine-grained detection of idleness is therefore required. This commit presses the old dyntick-idle code into full-time service, so that rcu_idle_enter(), previously known as rcu_enter_nohz(), is always invoked at the beginning of an idle loop iteration. Similarly, rcu_idle_exit(), previously known as rcu_exit_nohz(), is always invoked at the end of an idle-loop iteration. This allows the idle task to use RCU everywhere except between consecutive rcu_idle_enter() and rcu_idle_exit() calls, in turn allowing architecture maintainers to specify exactly where in the idle loop that RCU may be used. Because some of the userspace upcall uses can result in what looks to RCU like half of an interrupt, it is not possible to expect that the irq_enter() and irq_exit() hooks will give exact counts. This patch therefore expands the ->dynticks_nesting counter to 64 bits and uses two separate bitfields to count process/idle transitions and interrupt entry/exit transitions. It is presumed that userspace upcalls do not happen in the idle loop or from usermode execution (though usermode might do a system call that results in an upcall). The counter is hard-reset on each process/idle transition, which avoids the interrupt entry/exit error from accumulating. Overflow is avoided by the 64-bitness of the ->dyntick_nesting counter. This commit also adds warnings if a non-idle task asks RCU to enter idle state (and these checks will need some adjustment before applying Frederic's OS-jitter patches (http://lkml.org/lkml/2011/10/7/246). In addition, validation of ->dynticks and ->dynticks_nesting is added. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-12-11rcu: ->signaled better named ->fqs_statePaul E. McKenney
The ->signaled field was named before complications in the form of dyntick-idle mode and offlined CPUs. These complications have required that force_quiescent_state() be implemented as a state machine, instead of simply unconditionally sending reschedule IPIs. Therefore, this commit renames ->signaled to ->fqs_state to catch up with the new force_quiescent_state() reality. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-09-28rcu: Simplify quiescent-state accountingPaul E. McKenney
There is often a delay between the time that a CPU passes through a quiescent state and the time that this quiescent state is reported to the RCU core. It is quite possible that the grace period ended before the quiescent state could be reported, for example, some other CPU might have deduced that this CPU passed through dyntick-idle mode. It is critically important that quiescent state be counted only against the grace period that was in effect at the time that the quiescent state was detected. Previously, this was handled by recording the number of the last grace period to complete when passing through a quiescent state. The RCU core then checks this number against the current value, and rejects the quiescent state if there is a mismatch. However, one additional possibility must be accounted for, namely that the quiescent state was recorded after the prior grace period completed but before the current grace period started. In this case, the RCU core must reject the quiescent state, but the recorded number will match. This is handled when the CPU becomes aware of a new grace period -- at that point, it invalidates any prior quiescent state. This works, but is a bit indirect. The new approach records the current grace period, and the RCU core checks to see (1) that this is still the current grace period and (2) that this grace period has not yet ended. This approach simplifies reasoning about correctness, and this commit changes over to this new approach. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-09-28rcu: Move RCU_BOOST declarations to allow compiler checkingPaul E. McKenney
Andi Kleen noticed that one of the RCU_BOOST data declarations was out of sync with the definition. Move the declarations so that the compiler can do the checking in the future. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-09-28rcu: Fix mismatched variable in rcutree_trace.cAndi Kleen
rcutree.c defines rcu_cpu_kthread_cpu as int, not unsigned int, so the extern has to follow that. Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-07-26atomic: use <linux/atomic.h>Arun Sharma
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-06-15rcu: use softirq instead of kthreads except when RCU_BOOST=yPaul E. McKenney
This patch #ifdefs RCU kthreads out of the kernel unless RCU_BOOST=y, thus eliminating context-switch overhead if RCU priority boosting has not been configured. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-05-26rcu: Decrease memory-barrier usage based on semi-formal proofPaul E. McKenney
(Note: this was reverted, and is now being re-applied in pieces, with this being the fifth and final piece. See below for the reason that it is now felt to be safe to re-apply this.) Commit d09b62d fixed grace-period synchronization, but left some smp_mb() invocations in rcu_process_callbacks() that are no longer needed, but sheer paranoia prevented them from being removed. This commit removes them and provides a proof of correctness in their absence. It also adds a memory barrier to rcu_report_qs_rsp() immediately before the update to rsp->completed in order to handle the theoretical possibility that the compiler or CPU might move massive quantities of code into a lock-based critical section. This also proves that the sheer paranoia was not entirely unjustified, at least from a theoretical point of view. In addition, the old dyntick-idle synchronization depended on the fact that grace periods were many milliseconds in duration, so that it could be assumed that no dyntick-idle CPU could reorder a memory reference across an entire grace period. Unfortunately for this design, the addition of expedited grace periods breaks this assumption, which has the unfortunate side-effect of requiring atomic operations in the functions that track dyntick-idle state for RCU. (There is some hope that the algorithms used in user-level RCU might be applied here, but some work is required to handle the NMIs that user-space applications can happily ignore. For the short term, better safe than sorry.) This proof assumes that neither compiler nor CPU will allow a lock acquisition and release to be reordered, as doing so can result in deadlock. The proof is as follows: 1. A given CPU declares a quiescent state under the protection of its leaf rcu_node's lock. 2. If there is more than one level of rcu_node hierarchy, the last CPU to declare a quiescent state will also acquire the ->lock of the next rcu_node up in the hierarchy, but only after releasing the lower level's lock. The acquisition of this lock clearly cannot occur prior to the acquisition of the leaf node's lock. 3. Step 2 repeats until we reach the root rcu_node structure. Please note again that only one lock is held at a time through this process. The acquisition of the root rcu_node's ->lock must occur after the release of that of the leaf rcu_node. 4. At this point, we set the ->completed field in the rcu_state structure in rcu_report_qs_rsp(). However, if the rcu_node hierarchy contains only one rcu_node, then in theory the code preceding the quiescent state could leak into the critical section. We therefore precede the update of ->completed with a memory barrier. All CPUs will therefore agree that any updates preceding any report of a quiescent state will have happened before the update of ->completed. 5. Regardless of whether a new grace period is needed, rcu_start_gp() will propagate the new value of ->completed to all of the leaf rcu_node structures, under the protection of each rcu_node's ->lock. If a new grace period is needed immediately, this propagation will occur in the same critical section that ->completed was set in, but courtesy of the memory barrier in #4 above, is still seen to follow any pre-quiescent-state activity. 6. When a given CPU invokes __rcu_process_gp_end(), it becomes aware of the end of the old grace period and therefore makes any RCU callbacks that were waiting on that grace period eligible for invocation. If this CPU is the same one that detected the end of the grace period, and if there is but a single rcu_node in the hierarchy, we will still be in the single critical section. In this case, the memory barrier in step #4 guarantees that all callbacks will be seen to execute after each CPU's quiescent state. On the other hand, if this is a different CPU, it will acquire the leaf rcu_node's ->lock, and will again be serialized after each CPU's quiescent state for the old grace period. On the strength of this proof, this commit therefore removes the memory barriers from rcu_process_callbacks() and adds one to rcu_report_qs_rsp(). The effect is to reduce the number of memory barriers by one and to reduce the frequency of execution from about once per scheduling tick per CPU to once per grace period. This was reverted do to hangs found during testing by Yinghai Lu and Ingo Molnar. Frederic Weisbecker supplied Yinghai with tracing that located the underlying problem, and Frederic also provided the fix. The underlying problem was that the HARDIRQ_ENTER() macro from lib/locking-selftest.c invoked irq_enter(), which in turn invokes rcu_irq_enter(), but HARDIRQ_EXIT() invoked __irq_exit(), which does not invoke rcu_irq_exit(). This situation resulted in calls to rcu_irq_enter() that were not balanced by the required calls to rcu_irq_exit(). Therefore, after these locking selftests completed, RCU's dyntick-idle nesting count was a large number (for example, 72), which caused RCU to to conclude that the affected CPU was not in dyntick-idle mode when in fact it was. RCU would therefore incorrectly wait for this dyntick-idle CPU, resulting in hangs. In contrast, with Frederic's patch, which replaces the irq_enter() in HARDIRQ_ENTER() with an __irq_enter(), these tests don't ever call either rcu_irq_enter() or rcu_irq_exit(), which works because the CPU running the test is already marked as not being in dyntick-idle mode. This means that the rcu_irq_enter() and rcu_irq_exit() calls and RCU then has no problem working out which CPUs are in dyntick-idle mode and which are not. The reason that the imbalance was not noticed before the barrier patch was applied is that the old implementation of rcu_enter_nohz() ignored the nesting depth. This could still result in delays, but much shorter ones. Whenever there was a delay, RCU would IPI the CPU with the unbalanced nesting level, which would eventually result in rcu_enter_nohz() being called, which in turn would force RCU to see that the CPU was in dyntick-idle mode. The reason that very few people noticed the problem is that the mismatched irq_enter() vs. __irq_exit() occured only when the kernel was built with CONFIG_DEBUG_LOCKING_API_SELFTESTS. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-19Revert "rcu: Decrease memory-barrier usage based on semi-formal proof"Paul E. McKenney
This reverts commit e59fb3120becfb36b22ddb8bd27d065d3cdca499. This reversion was due to (extreme) boot-time slowdowns on SPARC seen by Yinghai Lu and on x86 by Ingo . This is a non-trivial reversion due to intervening commits. Conflicts: Documentation/RCU/trace.txt kernel/rcutree.c Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-05rcu: Add forward-progress diagnostic for per-CPU kthreadsPaul E. McKenney
Increment a per-CPU counter on each pass through rcu_cpu_kthread()'s service loop, and add it to the rcudata trace output. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05rcu: add grace-period age and more kthread state to tracingPaul E. McKenney
This commit adds the age in jiffies of the current grace period along with the duration in jiffies of the longest grace period since boot to the rcu/rcugp debugfs file. It also adds an additional "O" state to kthread tracing to differentiate between the kthread waiting due to having nothing to do on the one hand and waiting due to being on the wrong CPU on the other hand. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-05-05rcu: make rcutorture version numbers available through debugfsPaul E. McKenney
It is not possible to accurately correlate rcutorture output with that of debugfs. This patch therefore adds a debugfs file that prints out the rcutorture version number, permitting easy correlation. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05rcu: add tracing for RCU's kthread run states.Paul E. McKenney
Add tracing to help debugging situations when RCU's kthreads are not running but are supposed to be. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05rcu: add callback-queue information to rcudata outputPaul E. McKenney
This commit adds an indication of the state of the callback queue using a string of four characters following the "ql=" integer queue length. The first character is "N" if there are callbacks that have been queued that are not yet ready to be handled by the next grace period, or "." otherwise. The second character is "R" if there are callbacks queued that are ready to be handled by the next grace period, or "." otherwise. The third character is "W" if there are callbacks waiting for the current grace period, or "." otherwise. Finally, the fourth character is "D" if there are callbacks that have been handled by a prior grace period and are waiting to be invoked, or ".". Note that callbacks that are in the process of being invoked are not shown. These callbacks would have been removed from the rcu_data structure's list by rcu_do_batch() prior to being executed. (These callbacks are also not reflected in the "ql=" total, FWIW.) Also, document the new callback-queue trace information. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05rcu: Add boosting to TREE_PREEMPT_RCU tracingPaul E. McKenney
Includes total number of tasks boosted, number boosted on behalf of each of normal and expedited grace periods, and statistics on attempts to initiate boosting that failed for various reasons. Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05rcu: merge TREE_PREEPT_RCU blocked_tasks[] listsPaul E. McKenney
Combine the current TREE_PREEMPT_RCU ->blocked_tasks[] lists in the rcu_node structure into a single ->blkd_tasks list with ->gp_tasks and ->exp_tasks tail pointers. This is in preparation for RCU priority boosting, which will add a third dimension to the combinatorial explosion in the ->blocked_tasks[] case, but simply a third pointer in the new ->blkd_tasks case. Also update documentation to reflect blocked_tasks[] merge Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2011-05-05rcu: Decrease memory-barrier usage based on semi-formal proofPaul E. McKenney
Commit d09b62d fixed grace-period synchronization, but left some smp_mb() invocations in rcu_process_callbacks() that are no longer needed, but sheer paranoia prevented them from being removed. This commit removes them and provides a proof of correctness in their absence. It also adds a memory barrier to rcu_report_qs_rsp() immediately before the update to rsp->completed in order to handle the theoretical possibility that the compiler or CPU might move massive quantities of code into a lock-based critical section. This also proves that the sheer paranoia was not entirely unjustified, at least from a theoretical point of view. In addition, the old dyntick-idle synchronization depended on the fact that grace periods were many milliseconds in duration, so that it could be assumed that no dyntick-idle CPU could reorder a memory reference across an entire grace period. Unfortunately for this design, the addition of expedited grace periods breaks this assumption, which has the unfortunate side-effect of requiring atomic operations in the functions that track dyntick-idle state for RCU. (There is some hope that the algorithms used in user-level RCU might be applied here, but some work is required to handle the NMIs that user-space applications can happily ignore. For the short term, better safe than sorry.) This proof assumes that neither compiler nor CPU will allow a lock acquisition and release to be reordered, as doing so can result in deadlock. The proof is as follows: 1. A given CPU declares a quiescent state under the protection of its leaf rcu_node's lock. 2. If there is more than one level of rcu_node hierarchy, the last CPU to declare a quiescent state will also acquire the ->lock of the next rcu_node up in the hierarchy, but only after releasing the lower level's lock. The acquisition of this lock clearly cannot occur prior to the acquisition of the leaf node's lock. 3. Step 2 repeats until we reach the root rcu_node structure. Please note again that only one lock is held at a time through this process. The acquisition of the root rcu_node's ->lock must occur after the release of that of the leaf rcu_node. 4. At this point, we set the ->completed field in the rcu_state structure in rcu_report_qs_rsp(). However, if the rcu_node hierarchy contains only one rcu_node, then in theory the code preceding the quiescent state could leak into the critical section. We therefore precede the update of ->completed with a memory barrier. All CPUs will therefore agree that any updates preceding any report of a quiescent state will have happened before the update of ->completed. 5. Regardless of whether a new grace period is needed, rcu_start_gp() will propagate the new value of ->completed to all of the leaf rcu_node structures, under the protection of each rcu_node's ->lock. If a new grace period is needed immediately, this propagation will occur in the same critical section that ->completed was set in, but courtesy of the memory barrier in #4 above, is still seen to follow any pre-quiescent-state activity. 6. When a given CPU invokes __rcu_process_gp_end(), it becomes aware of the end of the old grace period and therefore makes any RCU callbacks that were waiting on that grace period eligible for invocation. If this CPU is the same one that detected the end of the grace period, and if there is but a single rcu_node in the hierarchy, we will still be in the single critical section. In this case, the memory barrier in step #4 guarantees that all callbacks will be seen to execute after each CPU's quiescent state. On the other hand, if this is a different CPU, it will acquire the leaf rcu_node's ->lock, and will again be serialized after each CPU's quiescent state for the old grace period. On the strength of this proof, this commit therefore removes the memory barriers from rcu_process_callbacks() and adds one to rcu_report_qs_rsp(). The effect is to reduce the number of memory barriers by one and to reduce the frequency of execution from about once per scheduling tick per CPU to once per grace period. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org>
2010-11-29rcu,cleanup: simplify the code when cpu is dyingLai Jiangshan
When we handle the CPU_DYING notifier, the whole system is stopped except for the current CPU. We therefore need no synchronization with the other CPUs. This allows us to move any orphaned RCU callbacks directly to the list of any online CPU without needing to run them through the global orphan lists. These global orphan lists can therefore be dispensed with. This commit makes thes changes, though currently victimizes CPU 0 @@@. Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2010-11-29rcu: get rid of obsolete "classic" names in TREE_RCU tracingPaul E. McKenney
The TREE_RCU tracing had obsolete rcuclassic_trace_init() and rcuclassic_trace_cleanup() function names. This commit brings them up to date: rcutree_trace_init() and rcutree_trace_cleanup(), respectively. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>