| Age | Commit message (Collapse) | Author |
|---|
|
commit 7d8b6c63751cfbbe5eef81a48c22978b3407a3ad upstream.
This is effectively a revert of 7b9a7ec565505699f503b4fcf61500dceb36e744
plus fixing it a different way...
We found, when trying to run an application from an application which
had dropped privs that the kernel does security checks on undefined
capability bits. This was ESPECIALLY difficult to debug as those
undefined bits are hidden from /proc/$PID/status.
Consider a root application which drops all capabilities from ALL 4
capability sets. We assume, since the application is going to set
eff/perm/inh from an array that it will clear not only the defined caps
less than CAP_LAST_CAP, but also the higher 28ish bits which are
undefined future capabilities.
The BSET gets cleared differently. Instead it is cleared one bit at a
time. The problem here is that in security/commoncap.c::cap_task_prctl()
we actually check the validity of a capability being read. So any task
which attempts to 'read all things set in bset' followed by 'unset all
things set in bset' will not even attempt to unset the undefined bits
higher than CAP_LAST_CAP.
So the 'parent' will look something like:
CapInh: 0000000000000000
CapPrm: 0000000000000000
CapEff: 0000000000000000
CapBnd: ffffffc000000000
All of this 'should' be fine. Given that these are undefined bits that
aren't supposed to have anything to do with permissions. But they do...
So lets now consider a task which cleared the eff/perm/inh completely
and cleared all of the valid caps in the bset (but not the invalid caps
it couldn't read out of the kernel). We know that this is exactly what
the libcap-ng library does and what the go capabilities library does.
They both leave you in that above situation if you try to clear all of
you capapabilities from all 4 sets. If that root task calls execve()
the child task will pick up all caps not blocked by the bset. The bset
however does not block bits higher than CAP_LAST_CAP. So now the child
task has bits in eff which are not in the parent. These are
'meaningless' undefined bits, but still bits which the parent doesn't
have.
The problem is now in cred_cap_issubset() (or any operation which does a
subset test) as the child, while a subset for valid cap bits, is not a
subset for invalid cap bits! So now we set durring commit creds that
the child is not dumpable. Given it is 'more priv' than its parent. It
also means the parent cannot ptrace the child and other stupidity.
The solution here:
1) stop hiding capability bits in status
This makes debugging easier!
2) stop giving any task undefined capability bits. it's simple, it you
don't put those invalid bits in CAP_FULL_SET you won't get them in init
and you won't get them in any other task either.
This fixes the cap_issubset() tests and resulting fallout (which
made the init task in a docker container untraceable among other
things)
3) mask out undefined bits when sys_capset() is called as it might use
~0, ~0 to denote 'all capabilities' for backward/forward compatibility.
This lets 'capsh --caps="all=eip" -- -c /bin/bash' run.
4) mask out undefined bit when we read a file capability off of disk as
again likely all bits are set in the xattr for forward/backward
compatibility.
This lets 'setcap all+pe /bin/bash; /bin/bash' run
Signed-off-by: Eric Paris <eparis@redhat.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Andrew Vagin <avagin@openvz.org>
Cc: Andrew G. Morgan <morgan@kernel.org>
Cc: Serge E. Hallyn <serge.hallyn@canonical.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Steve Grubb <sgrubb@redhat.com>
Cc: Dan Walsh <dwalsh@redhat.com>
Signed-off-by: James Morris <james.l.morris@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 90f62cf30a78721641e08737bda787552428061e ]
It is possible by passing a netlink socket to a more privileged
executable and then to fool that executable into writing to the socket
data that happens to be valid netlink message to do something that
privileged executable did not intend to do.
To keep this from happening replace bare capable and ns_capable calls
with netlink_capable, netlink_net_calls and netlink_ns_capable calls.
Which act the same as the previous calls except they verify that the
opener of the socket had the desired permissions as well.
Reported-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit c92cdeb45eea38515e82187f48c2e4f435fb4e25 upstream.
sys_getppid() returns the parent pid of the current process in its own pid
namespace. Since audit filters are based in the init pid namespace, a process
could avoid a filter or trigger an unintended one by being in an alternate pid
namespace or log meaningless information.
Switch to task_ppid_nr() for PPIDs to anchor all audit filters in the
init_pid_ns.
(informed by ebiederman's 6c621b7e)
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It its possible to configure your PAM stack to refuse login if audit
messages (about the login) were unable to be sent. This is common in
many distros and thus normal configuration of many containers. The PAM
modules determine if audit is enabled/disabled in the kernel based on
the return value from sending an audit message on the netlink socket.
If userspace gets back ECONNREFUSED it believes audit is disabled in the
kernel. If it gets any other error else it refuses to let the login
proceed.
Just about ever since the introduction of namespaces the kernel audit
subsystem has returned EPERM if the task sending a message was not in
the init user or pid namespace. So many forms of containers have never
worked if audit was enabled in the kernel.
BUT if the container was not in net_init then the kernel network code
would send ECONNREFUSED (instead of the audit code sending EPERM). Thus
by pure accident/dumb luck/bug if an admin configured the PAM stack to
reject all logins that didn't talk to audit, but then ran the login
untility in the non-init_net namespace, it would work!! Clearly this was
a bug, but it is a bug some people expected.
With the introduction of network namespace support in 3.14-rc1 the two
bugs stopped cancelling each other out. Now, containers in the
non-init_net namespace refused to let users log in (just like PAM was
configfured!) Obviously some people were not happy that what used to let
users log in, now didn't!
This fix is kinda hacky. We return ECONNREFUSED for all non-init
relevant namespaces. That means that not only will the old broken
non-init_net setups continue to work, now the broken non-init_pid or
non-init_user setups will 'work'. They don't really work, since audit
isn't logging things. But it's what most users want.
In 3.15 we should have patches to support not only the non-init_net
(3.14) namespace but also the non-init_pid and non-init_user namespace.
So all will be right in the world. This just opens the doors wide open
on 3.14 and hopefully makes users happy, if not the audit system...
Reported-by: Andre Tomt <andre@tomt.net>
Reported-by: Adam Richter <adam_richter2004@yahoo.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The kbuild test robot reported:
> tree: git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace.git for-next
> head: 6f285b19d09f72e801525f5eea1bdad22e559bf0
> commit: 6f285b19d09f72e801525f5eea1bdad22e559bf0 [2/2] audit: Send replies in the proper network namespace.
> reproduce: make htmldocs
>
> >> Warning(kernel/audit.c:575): No description found for parameter 'request_skb'
> >> Warning(kernel/audit.c:575): Excess function parameter 'portid' description in 'audit_send_reply'
> >> Warning(kernel/auditfilter.c:1074): No description found for parameter 'request_skb'
> >> Warning(kernel/auditfilter.c:1074): Excess function parameter 'portid' description in 'audit_list_rules_s
Which was caused by my failure to update the kdoc annotations when I
updated the functions. Fix that small oversight now.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
In perverse cases of file descriptor passing the current network
namespace of a process and the network namespace of a socket used by
that socket may differ. Therefore use the network namespace of the
appropiate socket to ensure replies always go to the appropiate
socket.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
In struct audit_netlink_list and audit_reply add a reference to the
network namespace of the caller and remove the userspace pid of the
caller. This cleanly remembers the callers network namespace, and
removes a huge class of races and nasty failure modes that can occur
when attempting to relook up the callers network namespace from a
pid_t (including the caller's network namespace changing, pid
wraparound, and the pid simply not being present).
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Fixup caught by checkpatch.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
A message about creating the audit socket might be fine at startup, but
a pr_info for every single network namespace created on a system isn't
useful.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
The equivalent uapi struct uses __u32 so make the kernel
uses u32 too.
This can prevent some oddities where the limit is
logged/emitted as a negative value.
Convert kstrtol to kstrtouint to disallow negative values.
Signed-off-by: Joe Perches <joe@perches.com>
[eparis: do not remove static from audit_default declaration]
|
|
Add pr_fmt to prefix "audit: " to output
Convert printk(KERN_<LEVEL> to pr_<level>
Coalesce formats
Use pr_cont
Move a brace after switch
Signed-off-by: Joe Perches <joe@perches.com>
|
|
Using the generic kernel function causes the
object size to increase with gcc 4.8.1.
$ size kernel/audit.o*
text data bss dec hex filename
18577 6079 8436 33092 8144 kernel/audit.o.new
18579 6015 8420 33014 80f6 kernel/audit.o.old
Unsigned...
|
|
An admin is likely to want to see old and new values next to each other.
Putting all of the old values followed by all of the new values is just
hard to read as a human.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
We can simplify the AUDIT_TTY_SET code to only grab the spin_lock one
time. We need to determine if the new values are valid and if so, set
the new values at the same time we grab the old onces. While we are
here get rid of 'res' and just use err.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
If userspace specified that it was setting values via the mask we do not
need a second check to see if they also set the version field high
enough to understand those values. (clearly if they set the mask they
knew those values).
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Give names to the audit versions. Just something for a userspace
programmer to know what the version provides.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
We had some craziness with signed to unsigned long casting which appears
wholely unnecessary. Just use signed long. Even though 2 values of the
math equation are unsigned longs the result is expected to be a signed
long. So why keep casting the result to signed long? Just make it
signed long and use it.
We also remove the needless "timeout" variable. We already have the
stack "sleep_time" variable. Just use that...
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Add task information to the log when changing a feature state.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
NETLINK_CB(skb).sk is the socket of user space process,
netlink_unicast in kauditd_send_skb wants the kernel
side socket. Since the sk_state of audit netlink socket
is not NETLINK_CONNECTED, so the netlink_getsockbyportid
doesn't return -ECONNREFUSED.
And the socket of userspace process can be released anytime,
so the audit_sock may point to invalid socket.
this patch sets the audit_sock to the kernel side audit
netlink socket.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
print the error message and then return -ENOMEM.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
An error on an AUDIT_NEVER rule disabled logging on that rule.
On error on AUDIT_NEVER rules, log.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
The backlog cannot be consumed when audit_log_start is running on auditd
even if audit_log_start calls wait_for_auditd to consume it.
The situation is the deadlock because only auditd can consume the backlog.
If the other process needs to send the backlog, it can be also stopped
by the deadlock.
So, audit_log_start running on auditd should not stop.
You can see the deadlock with the following reproducer:
# auditctl -a exit,always -S all
# reboot
Signed-off-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Reviewed-by: gaofeng@cn.fujitsu.com
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
We do not need to hold the audit_cmd_mutex for this family of cases. The
possible exception to this is the call to audit_filter_user(), so drop the lock
immediately after. To help in fixing the race we are trying to avoid, make
sure that nothing called by audit_filter_user() calls audit_log_start(). In
particular, watch out for *_audit_rule_match().
This fix will take care of systemd and anything USING audit. It still means
that we could race with something configuring audit and auditd shutting down.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Reported-by: toshi.okajima@jp.fujitsu.com
Tested-by: toshi.okajima@jp.fujitsu.com
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Right now the sessionid value in the kernel is a combination of u32,
int, and unsigned int. Just use unsigned int throughout.
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Currently when the coredump signals are logged by the audit system, the
actual path to the executable is not logged. Without details of exe, the
system admin may not have an exact idea on what program failed.
This patch changes the audit_log_task() so that the path to the exe is also
logged.
This was copied from audit_log_task_info() and the latter enhanced to avoid
disappearing text fields.
Signed-off-by: Paul Davies C <pauldaviesc@gmail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
There have been reports of auditd restarts resulting in kaudit not being able
to find a newly registered auditd. It results in reports such as:
kernel: [ 2077.233573] audit: *NO* daemon at audit_pid=1614
kernel: [ 2077.234712] audit: audit_lost=97 audit_rate_limit=0 audit_backlog_limit=320
kernel: [ 2077.234718] audit: auditd disappeared
(previously mis-spelled "dissapeared")
One possible cause is a race between the shutdown of an older auditd and a
newer one. If the newer one sets the daemon pid to itself in kauditd before
the older one has cleared the daemon pid, the newer daemon pid will be erased.
This could be caused by an automated system, or by manual intervention, but in
either case, there is no use in having the older daemon clear the daemon pid
reference since its old pid is no longer being referenced. This patch will
prevent that specific case, returning an error of EACCES.
The case for preventing a newer auditd from registering itself if there is an
existing auditd is a more difficult case that is beyond the scope of this
patch.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
audit_receive_msg() needlessly contained a fallthrough case that called
audit_receive_filter(), containing no common code between the cases. Separate
them to make the logic clearer. Refactor AUDIT_LIST_RULES, AUDIT_ADD_RULE,
AUDIT_DEL_RULE cases to create audit_rule_change(), audit_list_rules_send()
functions. This should not functionally change the logic.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Log transition of config changes when AUDIT_TTY_SET is called, including both
enabled and log_passwd values now in the struct.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
kauditd_send_skb is called after audit_pid was checked to be non-zero.
However, it can be set to 0 due to auditd exiting while kauditd_send_skb
is still executed and this can result in a spurious warning about missing
auditd.
Re-check audit_pid before printing the message.
Signed-off-by: Mateusz Guzik <mguzik@redhat.com>
Cc: Eric Paris <eparis@redhat.com>
Cc: linux-kernel@vger.kernel.org
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Since audit can already be disabled by "audit=0" on the kernel boot line, or by
the command "auditctl -e 0", it would be more useful to have the
audit_backlog_limit set to zero mean effectively unlimited (limited only by
system RAM).
Acked-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
we already have old_lock, no need to calculate it again.
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
If audit is disabled,we shouldn't generate the audit log.
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
The order of new feature and old feature is incorrect,
this patch fix it.
Acked-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Since kernel parameter is operated before
initcall, so the audit_initialized must be
AUDIT_UNINITIALIZED or DISABLED in audit_enable.
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
reaahead-collector abuses the audit logging facility to discover which files
are accessed at boot time to make a pre-load list
Add a tuning option to audit_backlog_wait_time so that if auditd can't keep up,
or gets blocked, the callers won't be blocked.
Bump audit_status API version to "2".
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Re-named confusing local variable names (status_set and status_get didn't agree
with their command type name) and reduced their scope.
Future-proof API changes by not depending on the exact size of the audit_status
struct and by adding an API version field.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
The default audit_backlog_limit is 64. This was a reasonable limit at one time.
systemd causes so much audit queue activity on startup that auditd doesn't
start before the backlog queue has already overflowed by more than a factor of
2. On a system with audit= not set on the kernel command line, this isn't an
issue since that history isn't kept for auditd when it is available. On a
system with audit=1 set on the kernel command line, kaudit tries to keep that
history until auditd is able to drain the queue.
This default can be changed by the "-b" option in audit.rules once the system
has booted, but won't help with lost messages on boot.
One way to solve this would be to increase the default backlog queue size to
avoid losing any messages before auditd is able to consume them. This would
be overkill to the embedded community and insufficient for some servers.
Another way to solve it might be to add a kconfig option to set the default
based on the system type. An embedded system would get the current (or
smaller) default, while Workstations might get more than now and servers might
get more.
None of these solutions helps if a system's compiled default is too small to
see the lost messages without compiling a new kernel.
This patch adds a kernel set-up parameter (audit already has one to
enable/disable it) "audit_backlog_limit=<n>" that overrides the default to
allow the system administrator to set the backlog limit.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
These and similar errors were seen on a patched 3.8 kernel when the
audit subsystem was overrun during boot:
udevd[876]: worker [887] unexpectedly returned with status 0x0100
udevd[876]: worker [887] failed while handling
'/devices/pci0000:00/0000:00:03.0/0000:40:00.0'
udevd[876]: worker [880] unexpectedly returned with status 0x0100
udevd[876]: worker [880] failed while handling
'/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1'
udevadm settle - timeout of 180 seconds reached, the event queue
contains:
/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995)
/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034)
audit: audit_backlog=258 > audit_backlog_limit=256
audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256
The change below increases the efficiency of the audit code and prevents it
from being overrun:
Use add_wait_queue_exclusive() in wait_for_auditd() to put the
thread on the wait queue. When kauditd dequeues an skb, all
of the waiting threads are waiting for the same resource, but
only one is going to get it, so there's no need to wake up
more than one waiter.
See: https://lkml.org/lkml/2013/9/2/479
Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
These and similar errors were seen on a patched 3.8 kernel when the
audit subsystem was overrun during boot:
udevd[876]: worker [887] unexpectedly returned with status 0x0100
udevd[876]: worker [887] failed while handling
'/devices/pci0000:00/0000:00:03.0/0000:40:00.0'
udevd[876]: worker [880] unexpectedly returned with status 0x0100
udevd[876]: worker [880] failed while handling
'/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1'
udevadm settle - timeout of 180 seconds reached, the event queue
contains:
/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1 (3995)
/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/INT3F0D:00 (4034)
audit: audit_backlog=258 > audit_backlog_limit=256
audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=256
The change below increases the efficiency of the audit code and prevents it
from being overrun:
Only issue a wake_up in kauditd if the length of the skb queue is less than the
backlog limit. Otherwise, threads waiting in wait_for_auditd() will simply
wake up, discover that the queue is still too long for them to proceed, and go
back to sleep. This results in wasted context switches and machine cycles.
kauditd_thread() is the only function that removes buffers from audit_skb_queue
so we can't race. If we did, the timeout in wait_for_auditd() would expire and
the waiting thread would continue.
See: https://lkml.org/lkml/2013/9/2/479
Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
If wait_for_auditd() times out, go immediately to the error function rather
than retesting the loop conditions.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
When the audit queue overflows and times out (audit_backlog_wait_time), the
audit queue overflow timeout is set to zero. Once the audit queue overflow
timeout condition recovers, the timeout should be reset to the original value.
See also:
https://lkml.org/lkml/2013/9/2/473
Cc: stable@vger.kernel.org # v3.8-rc4+
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Dan Duval <dan.duval@oracle.com>
Signed-off-by: Chuck Anderson <chuck.anderson@oracle.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Convert audit from only listening in init_net to use register_pernet_subsys()
to dynamically manage the netlink socket list.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
When being refactored from audit_log_start() to audit_log_task_info(), in
commit e23eb920 the tty and ses fields in the log output got transposed.
Restore to original order to avoid breaking search tools.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Normally, netlink ports use the PID of the userspace process as the port ID.
If the PID is already in use by a port, the kernel will allocate another port
ID to avoid conflict. Re-name all references to netlink ports from pid to
portid to reflect this reality and avoid confusion with actual PIDs. Ports
use the __u32 type, so re-type all portids accordingly.
(This patch is very similar to ebiederman's 5deadd69)
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Gao feng <gaofeng@cn.fujitsu.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Linux 3.12
Conflicts:
fs/exec.c
|
|
...to make it clear what the intent behind each record's operation was.
In many cases you can infer this, based on the context of the syscall
and the result. In other cases it's not so obvious. For instance, in
the case where you have a file being renamed over another, you'll have
two different records with the same filename but different inode info.
By logging this information we can clearly tell which one was created
and which was deleted.
This fixes what was broken in commit bfcec708.
Commit 79f6530c should also be backported to stable v3.7+.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
In send/GET, we don't want the kernel to lie about what value is set.
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
Using the nlmsg_len member of the netlink header to test if the message
is valid is wrong as it includes the size of the netlink header itself.
Thereby allowing to send short netlink messages that pass those checks.
Use nlmsg_len() instead to test for the right message length. The result
of nlmsg_len() is guaranteed to be non-negative as the netlink message
already passed the checks of nlmsg_ok().
Also switch to min_t() to please checkpatch.pl.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: stable@vger.kernel.org # v2.6.6+ for the 1st hunk, v2.6.23+ for the 2nd
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
We currently are setting fields to 0 to initialize the structure
declared on the stack. This is a bad idea as if the structure has holes
or unpacked space these will not be initialized. Just use memset. This
is not a performance critical section of code.
Signed-off-by: Eric Paris <eparis@redhat.com>
|
|
We leak 4 bytes of kernel stack in response to an AUDIT_GET request as
we miss to initialize the mask member of status_set. Fix that.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: stable@vger.kernel.org # v2.6.6+
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
|
Eric Paris
Eric W. Biederman
Richard Guy Briggs
Joe Perches
Gao feng
Toshiyuki Okajima
Paul Davies C
Dan Duval
Jeff Layton
Mathias Krause