| Age | Commit message (Collapse) | Author |
|---|
|
commit f87d1c9559164294040e58f5e3b74a162bf7c6e8 upstream.
I goofed when I added mm->user_ns support to would_dump. I missed the
fact that in the case of binfmt_loader, binfmt_em86, binfmt_misc, and
binfmt_script bprm->file is reassigned. Which made the move of
would_dump from setup_new_exec to __do_execve_file before exec_binprm
incorrect as it can result in would_dump running on the script instead
of the interpreter of the script.
The net result is that the code stopped making unreadable interpreters
undumpable. Which allows them to be ptraced and written to disk
without special permissions. Oops.
The move was necessary because the call in set_new_exec was after
bprm->mm was no longer valid.
To correct this mistake move the misplaced would_dump from
__do_execve_file into flos_old_exec, before exec_mmap is called.
I tested and confirmed that without this fix I can attach with gdb to
a script with an unreadable interpreter, and with this fix I can not.
Cc: stable@vger.kernel.org
Fixes: f84df2a6f268 ("exec: Ensure mm->user_ns contains the execed files")
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a48137996063d22ffba77e077425f49873856ca5 upstream.
Failed async writes that are requeued may not clean up a refcount
on the file, which can result in a leaked open. This scenario arises
very reliably when using persistent handles and a reconnect occurs
while writing.
cifs_writev_requeue only releases the reference if the write fails
(rc != 0). The server->ops->async_writev operation will take its own
reference, so the initial reference can always be released.
Signed-off-by: Adam McCoy <adam@forsedomani.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
CC: Stable <stable@vger.kernel.org>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 50eaa652b54df1e2b48dc398d9e6114c9ed080eb ]
Commit 402cb8dda949 ("fscache: Attach the index key and aux data to
the cookie") added the aux_data and aux_data_len to parameters to
fscache_acquire_cookie(), and updated the callers in the NFS client.
In the process it modified the aux_data to include the change_attr,
but missed adding change_attr to a couple places where aux_data was
used. Specifically, when opening a file and the change_attr is not
added, the following attempt to lookup an object will fail inside
cachefiles_check_object_xattr() = -116 due to
nfs_fscache_inode_check_aux() failing memcmp on auxdata and returning
FSCACHE_CHECKAUX_OBSOLETE.
Fix this by adding nfs_fscache_update_auxdata() to set the auxdata
from all relevant fields in the inode, including the change_attr.
Fixes: 402cb8dda949 ("fscache: Attach the index key and aux data to the cookie")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6e31ded6895adfca97211118cc9b72236e8f6d53 ]
nfs currently behaves differently on 32-bit and 64-bit kernels regarding
the on-disk format of nfs_fscache_inode_auxdata.
That format should really be the same on any kernel, and we should avoid
the 'timespec' type in order to remove that from the kernel later on.
Using plain 'timespec64' would not be good here, since that includes
implied padding and would possibly leak kernel stack data to the on-disk
format on 32-bit architectures.
struct __kernel_timespec would work as a replacement, but open-coding
the two struct members in nfs_fscache_inode_auxdata makes it more
obvious what's going on here, and keeps the current format for 64-bit
architectures.
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d9bfced1fbcb35b28d8fbed4e785d2807055ed2b ]
Commit 402cb8dda949 ("fscache: Attach the index key and aux data to
the cookie") added the index_key and index_key_len parameters to
fscache_acquire_cookie(), and updated the callers in the NFS client.
One of the callers was inside nfs_fscache_get_super_cookie()
and was changed to use the full struct nfs_fscache_key as the
index_key. However, a couple members of this structure contain
pointers and thus will change each time the same NFS share is
remounted. Since index_key is used for fscache_cookie->key_hash
and this subsequently is used to compare cookies, the effectiveness
of fscache with NFS is reduced to the point at which a umount
occurs. Any subsequent remount of the same share will cause a
unique NFS super_block index_key and key_hash to be generated for
the same data, rendering any prior fscache data unable to be
found. A simple reproducer demonstrates the problem.
1. Mount share with 'fsc', create a file, drop page cache
systemctl start cachefilesd
mount -o vers=3,fsc 127.0.0.1:/export /mnt
dd if=/dev/zero of=/mnt/file1.bin bs=4096 count=1
echo 3 > /proc/sys/vm/drop_caches
2. Read file into page cache and fscache, then unmount
dd if=/mnt/file1.bin of=/dev/null bs=4096 count=1
umount /mnt
3. Remount and re-read which should come from fscache
mount -o vers=3,fsc 127.0.0.1:/export /mnt
echo 3 > /proc/sys/vm/drop_caches
dd if=/mnt/file1.bin of=/dev/null bs=4096 count=1
4. Check for READ ops in mountstats - there should be none
grep READ: /proc/self/mountstats
Looking at the history and the removed function, nfs_super_get_key(),
we should only use nfs_fscache_key.key plus any uniquifier, for
the fscache index_key.
Fixes: 402cb8dda949 ("fscache: Attach the index key and aux data to the cookie")
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 566a2ab3c9005f62e784bd39022d58d34ef4365c ]
Make sure we don't walk past the end of the metadata in gfs2_walk_metadata: the
inode holds fewer pointers than indirect blocks.
Slightly clean up gfs2_iomap_get.
Fixes: a27a0c9b6a20 ("gfs2: gfs2_walk_metadata fix")
Cc: stable@vger.kernel.org # v5.3+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 3740d93e37902b31159a82da2d5c8812ed825404 upstream.
Commit 64e90a8acb859 ("Introduce STATIC_USERMODEHELPER to mediate
call_usermodehelper()") added the optiont to disable all
call_usermodehelper() calls by setting STATIC_USERMODEHELPER_PATH to
an empty string. When this is done, and crashdump is triggered, it
will crash on null pointer dereference, since we make assumptions
over what call_usermodehelper_exec() did.
This has been reported by Sergey when one triggers a a coredump
with the following configuration:
```
CONFIG_STATIC_USERMODEHELPER=y
CONFIG_STATIC_USERMODEHELPER_PATH=""
kernel.core_pattern = |/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %h %e
```
The way disabling the umh was designed was that call_usermodehelper_exec()
would just return early, without an error. But coredump assumes
certain variables are set up for us when this happens, and calls
ile_start_write(cprm.file) with a NULL file.
[ 2.819676] BUG: kernel NULL pointer dereference, address: 0000000000000020
[ 2.819859] #PF: supervisor read access in kernel mode
[ 2.820035] #PF: error_code(0x0000) - not-present page
[ 2.820188] PGD 0 P4D 0
[ 2.820305] Oops: 0000 [#1] SMP PTI
[ 2.820436] CPU: 2 PID: 89 Comm: a Not tainted 5.7.0-rc1+ #7
[ 2.820680] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190711_202441-buildvm-armv7-10.arm.fedoraproject.org-2.fc31 04/01/2014
[ 2.821150] RIP: 0010:do_coredump+0xd80/0x1060
[ 2.821385] Code: e8 95 11 ed ff 48 c7 c6 cc a7 b4 81 48 8d bd 28 ff
ff ff 89 c2 e8 70 f1 ff ff 41 89 c2 85 c0 0f 84 72 f7 ff ff e9 b4 fe ff
ff <48> 8b 57 20 0f b7 02 66 25 00 f0 66 3d 00 8
0 0f 84 9c 01 00 00 44
[ 2.822014] RSP: 0000:ffffc9000029bcb8 EFLAGS: 00010246
[ 2.822339] RAX: 0000000000000000 RBX: ffff88803f860000 RCX: 000000000000000a
[ 2.822746] RDX: 0000000000000009 RSI: 0000000000000282 RDI: 0000000000000000
[ 2.823141] RBP: ffffc9000029bde8 R08: 0000000000000000 R09: ffffc9000029bc00
[ 2.823508] R10: 0000000000000001 R11: ffff88803dec90be R12: ffffffff81c39da0
[ 2.823902] R13: ffff88803de84400 R14: 0000000000000000 R15: 0000000000000000
[ 2.824285] FS: 00007fee08183540(0000) GS:ffff88803e480000(0000) knlGS:0000000000000000
[ 2.824767] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2.825111] CR2: 0000000000000020 CR3: 000000003f856005 CR4: 0000000000060ea0
[ 2.825479] Call Trace:
[ 2.825790] get_signal+0x11e/0x720
[ 2.826087] do_signal+0x1d/0x670
[ 2.826361] ? force_sig_info_to_task+0xc1/0xf0
[ 2.826691] ? force_sig_fault+0x3c/0x40
[ 2.826996] ? do_trap+0xc9/0x100
[ 2.827179] exit_to_usermode_loop+0x49/0x90
[ 2.827359] prepare_exit_to_usermode+0x77/0xb0
[ 2.827559] ? invalid_op+0xa/0x30
[ 2.827747] ret_from_intr+0x20/0x20
[ 2.827921] RIP: 0033:0x55e2c76d2129
[ 2.828107] Code: 2d ff ff ff e8 68 ff ff ff 5d c6 05 18 2f 00 00 01
c3 0f 1f 80 00 00 00 00 c3 0f 1f 80 00 00 00 00 e9 7b ff ff ff 55 48 89
e5 <0f> 0b b8 00 00 00 00 5d c3 66 2e 0f 1f 84 0
0 00 00 00 00 0f 1f 40
[ 2.828603] RSP: 002b:00007fffeba5e080 EFLAGS: 00010246
[ 2.828801] RAX: 000055e2c76d2125 RBX: 0000000000000000 RCX: 00007fee0817c718
[ 2.829034] RDX: 00007fffeba5e188 RSI: 00007fffeba5e178 RDI: 0000000000000001
[ 2.829257] RBP: 00007fffeba5e080 R08: 0000000000000000 R09: 00007fee08193c00
[ 2.829482] R10: 0000000000000009 R11: 0000000000000000 R12: 000055e2c76d2040
[ 2.829727] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 2.829964] CR2: 0000000000000020
[ 2.830149] ---[ end trace ceed83d8c68a1bf1 ]---
```
Cc: <stable@vger.kernel.org> # v4.11+
Fixes: 64e90a8acb85 ("Introduce STATIC_USERMODEHELPER to mediate call_usermodehelper()")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=199795
Reported-by: Tony Vroon <chainsaw@gentoo.org>
Reported-by: Sergey Kvachonok <ravenexp@gmail.com>
Tested-by: Sergei Trofimovich <slyfox@gentoo.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20200416162859.26518-1-mcgrof@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fada37f6f62995cc449b36ebba1220594bfe55fe ]
We use a spinlock while we are reading and accessing the destination address for a server.
We need to also use this spinlock to protect when we are modifying this address from
reconn_set_ipaddr().
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
fs_info::journal_info
commit fcc99734d1d4ced30167eb02e17f656735cb9928 upstream.
[BUG]
One run of btrfs/063 triggered the following lockdep warning:
============================================
WARNING: possible recursive locking detected
5.6.0-rc7-custom+ #48 Not tainted
--------------------------------------------
kworker/u24:0/7 is trying to acquire lock:
ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]
but task is already holding lock:
ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(sb_internal#2);
lock(sb_internal#2);
*** DEADLOCK ***
May be due to missing lock nesting notation
4 locks held by kworker/u24:0/7:
#0: ffff88817b495948 ((wq_completion)btrfs-endio-write){+.+.}, at: process_one_work+0x557/0xb80
#1: ffff888189ea7db8 ((work_completion)(&work->normal_work)){+.+.}, at: process_one_work+0x557/0xb80
#2: ffff88817d3a46e0 (sb_internal#2){.+.+}, at: start_transaction+0x66c/0x890 [btrfs]
#3: ffff888174ca4da8 (&fs_info->reloc_mutex){+.+.}, at: btrfs_record_root_in_trans+0x83/0xd0 [btrfs]
stack backtrace:
CPU: 0 PID: 7 Comm: kworker/u24:0 Not tainted 5.6.0-rc7-custom+ #48
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
Workqueue: btrfs-endio-write btrfs_work_helper [btrfs]
Call Trace:
dump_stack+0xc2/0x11a
__lock_acquire.cold+0xce/0x214
lock_acquire+0xe6/0x210
__sb_start_write+0x14e/0x290
start_transaction+0x66c/0x890 [btrfs]
btrfs_join_transaction+0x1d/0x20 [btrfs]
find_free_extent+0x1504/0x1a50 [btrfs]
btrfs_reserve_extent+0xd5/0x1f0 [btrfs]
btrfs_alloc_tree_block+0x1ac/0x570 [btrfs]
btrfs_copy_root+0x213/0x580 [btrfs]
create_reloc_root+0x3bd/0x470 [btrfs]
btrfs_init_reloc_root+0x2d2/0x310 [btrfs]
record_root_in_trans+0x191/0x1d0 [btrfs]
btrfs_record_root_in_trans+0x90/0xd0 [btrfs]
start_transaction+0x16e/0x890 [btrfs]
btrfs_join_transaction+0x1d/0x20 [btrfs]
btrfs_finish_ordered_io+0x55d/0xcd0 [btrfs]
finish_ordered_fn+0x15/0x20 [btrfs]
btrfs_work_helper+0x116/0x9a0 [btrfs]
process_one_work+0x632/0xb80
worker_thread+0x80/0x690
kthread+0x1a3/0x1f0
ret_from_fork+0x27/0x50
It's pretty hard to reproduce, only one hit so far.
[CAUSE]
This is because we're calling btrfs_join_transaction() without re-using
the current running one:
btrfs_finish_ordered_io()
|- btrfs_join_transaction() <<< Call #1
|- btrfs_record_root_in_trans()
|- btrfs_reserve_extent()
|- btrfs_join_transaction() <<< Call #2
Normally such btrfs_join_transaction() call should re-use the existing
one, without trying to re-start a transaction.
But the problem is, in btrfs_join_transaction() call #1, we call
btrfs_record_root_in_trans() before initializing current::journal_info.
And in btrfs_join_transaction() call #2, we're relying on
current::journal_info to avoid such deadlock.
[FIX]
Call btrfs_record_root_in_trans() after we have initialized
current::journal_info.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f135cea30de5f74d5bfb5116682073841fb4af8f upstream.
When we have an inode with a prealloc extent that starts at an offset
lower than the i_size and there is another prealloc extent that starts at
an offset beyond i_size, we can end up losing part of the first prealloc
extent (the part that starts at i_size) and have an implicit hole if we
fsync the file and then have a power failure.
Consider the following example with comments explaining how and why it
happens.
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
# Create our test file with 2 consecutive prealloc extents, each with a
# size of 128Kb, and covering the range from 0 to 256Kb, with a file
# size of 0.
$ xfs_io -f -c "falloc -k 0 128K" /mnt/foo
$ xfs_io -c "falloc -k 128K 128K" /mnt/foo
# Fsync the file to record both extents in the log tree.
$ xfs_io -c "fsync" /mnt/foo
# Now do a redudant extent allocation for the range from 0 to 64Kb.
# This will merely increase the file size from 0 to 64Kb. Instead we
# could also do a truncate to set the file size to 64Kb.
$ xfs_io -c "falloc 0 64K" /mnt/foo
# Fsync the file, so we update the inode item in the log tree with the
# new file size (64Kb). This also ends up setting the number of bytes
# for the first prealloc extent to 64Kb. This is done by the truncation
# at btrfs_log_prealloc_extents().
# This means that if a power failure happens after this, a write into
# the file range 64Kb to 128Kb will not use the prealloc extent and
# will result in allocation of a new extent.
$ xfs_io -c "fsync" /mnt/foo
# Now set the file size to 256K with a truncate and then fsync the file.
# Since no changes happened to the extents, the fsync only updates the
# i_size in the inode item at the log tree. This results in an implicit
# hole for the file range from 64Kb to 128Kb, something which fsck will
# complain when not using the NO_HOLES feature if we replay the log
# after a power failure.
$ xfs_io -c "truncate 256K" -c "fsync" /mnt/foo
So instead of always truncating the log to the inode's current i_size at
btrfs_log_prealloc_extents(), check first if there's a prealloc extent
that starts at an offset lower than the i_size and with a length that
crosses the i_size - if there is one, just make sure we truncate to a
size that corresponds to the end offset of that prealloc extent, so
that we don't lose the part of that extent that starts at i_size if a
power failure happens.
A test case for fstests follows soon.
Fixes: 31d11b83b96f ("Btrfs: fix duplicate extents after fsync of file with prealloc extents")
CC: stable@vger.kernel.org # 4.14+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 7648f939cb919b9d15c21fff8cd9eba908d595dc upstream.
nfs3_set_acl keeps track of the acl it allocated locally to determine if an acl
needs to be released at the end. This results in a memory leak when the
function allocates an acl as well as a default acl. Fix by releasing acls
that differ from the acl originally passed into nfs3_set_acl.
Fixes: b7fa0554cf1b ("[PATCH] NFS: Add support for NFSv3 ACLs")
Reported-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f6033c5e333238f299c3ae03fac8cc1365b23b77 upstream.
btrfs_remove_block_group() invokes btrfs_lookup_block_group(), which
returns a local reference of the block group that contains the given
bytenr to "block_group" with increased refcount.
When btrfs_remove_block_group() returns, "block_group" becomes invalid,
so the refcount should be decreased to keep refcount balanced.
The reference counting issue happens in several exception handling paths
of btrfs_remove_block_group(). When those error scenarios occur such as
btrfs_alloc_path() returns NULL, the function forgets to decrease its
refcnt increased by btrfs_lookup_block_group() and will cause a refcnt
leak.
Fix this issue by jumping to "out_put_group" label and calling
btrfs_put_block_group() when those error scenarios occur.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b0d3869ce9eeacbb1bbd541909beeef4126426d5 upstream.
... to protect the modification of mp->m_count done by it. Most of
the places that modify that thing also have namespace_lock held,
but not all of them can do so, so we really need mount_lock here.
Kudos to Piotr Krysiuk <piotras@gmail.com>, who'd spotted a related
bug in pivot_root(2) (fixed unnoticed in 5.3); search for other
similar turds has caught out this one.
Cc: stable@kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f1eec3b0d0a849996ebee733b053efa71803dad5 upstream.
While calculating overhead for internal journal, also check
that j_inum shouldn't be 0. Otherwise we get below error with
xfstests generic/050 with external journal (XXX_LOGDEV config) enabled.
It could be simply reproduced with loop device with an external journal
and marking blockdev as RO before mounting.
[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
CPU: 107 PID: 115347 Comm: mount Tainted: G L --------- -t - 4.18.0-167.el8.ppc64le #1
NIP: c0000000006f6d44 LR: c0000000006f6d40 CTR: 0000000030041dd4
<...>
NIP [c0000000006f6d44] generic_make_request_checks+0x6b4/0x7d0
LR [c0000000006f6d40] generic_make_request_checks+0x6b0/0x7d0
<...>
Call Trace:
generic_make_request_checks+0x6b0/0x7d0 (unreliable)
generic_make_request+0x3c/0x420
submit_bio+0xd8/0x200
submit_bh_wbc+0x1e8/0x250
__sync_dirty_buffer+0xd0/0x210
ext4_commit_super+0x310/0x420 [ext4]
__ext4_error+0xa4/0x1e0 [ext4]
__ext4_iget+0x388/0xe10 [ext4]
ext4_get_journal_inode+0x40/0x150 [ext4]
ext4_calculate_overhead+0x5a8/0x610 [ext4]
ext4_fill_super+0x3188/0x3260 [ext4]
mount_bdev+0x778/0x8f0
ext4_mount+0x28/0x50 [ext4]
mount_fs+0x74/0x230
vfs_kern_mount.part.6+0x6c/0x250
do_mount+0x2fc/0x1280
sys_mount+0x158/0x180
system_call+0x5c/0x70
EXT4-fs (pmem1p2): no journal found
EXT4-fs (pmem1p2): can't get journal size
EXT4-fs (pmem1p2): mounted filesystem without journal. Opts: dax,norecovery
Fixes: 3c816ded78bb ("ext4: use journal inode to determine journal overhead")
Reported-by: Harish Sriram <harish@linux.ibm.com>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200316093038.25485-1-riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 907ea529fc4c3296701d2bfc8b831dd2a8121a34 ]
If the in-core buddy bitmap gets corrupted (or out of sync with the
block bitmap), issue a WARN_ON and try to recover. In most cases this
involves skipping trying to allocate out of a particular block group.
We can end up declaring the file system corrupted, which is fair,
since the file system probably should be checked before we proceed any
further.
Link: https://lore.kernel.org/r/20200414035649.293164-1-tytso@mit.edu
Google-Bug-Id: 34811296
Google-Bug-Id: 34639169
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a17a9d935dc4a50acefaf319d58030f1da7f115a ]
Current wait times have proven to be too short to protect against inode
reuses that lead to metadata inconsistencies.
Now that we will retry the inode allocation if we can't find any
recently deleted inodes, it's a lot safer to increase the recently
deleted time from 5 seconds to a minute.
Link: https://lore.kernel.org/r/20200414023925.273867-1-tytso@mit.edu
Google-Bug-Id: 36602237
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c2a559bc0e7ed5a715ad6b947025b33cb7c05ea7 ]
Run generic/388 with journal data mode sometimes may trigger the warning
in ext4_invalidatepage. Actually, we should use the matching invalidatepage
in ext4_writepage.
Signed-off-by: yangerkun <yangerkun@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20200226041002.13914-1-yangerkun@huawei.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c142932c29e533ee892f87b44d8abc5719edceec ]
In the reflink extent remap function, it turns out that uirec (the block
mapping corresponding only to the part of the passed-in mapping that got
unmapped) was not fully initialized. Specifically, br_state was not
being copied from the passed-in struct to the uirec. This could lead to
unpredictable results such as the reflinked mapping being marked
unwritten in the destination file.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 10a98cb16d80be3595fdb165fad898bb28b8b6d2 upstream.
Leaving PF_MEMALLOC set when exiting a kthread causes it to remain set
during do_exit(). That can confuse things. In particular, if BSD
process accounting is enabled, then do_exit() writes data to an
accounting file. If that file has FS_SYNC_FL set, then this write
occurs synchronously and can misbehave if PF_MEMALLOC is set.
For example, if the accounting file is located on an XFS filesystem,
then a WARN_ON_ONCE() in iomap_do_writepage() is triggered and the data
doesn't get written when it should. Or if the accounting file is
located on an ext4 filesystem without a journal, then a WARN_ON_ONCE()
in ext4_write_inode() is triggered and the inode doesn't get written.
Fix this in xfsaild() by using the helper functions to save and restore
PF_MEMALLOC.
This can be reproduced as follows in the kvm-xfstests test appliance
modified to add the 'acct' Debian package, and with kvm-xfstests's
recommended kconfig modified to add CONFIG_BSD_PROCESS_ACCT=y:
mkfs.xfs -f /dev/vdb
mount /vdb
touch /vdb/file
chattr +S /vdb/file
accton /vdb/file
mkfs.xfs -f /dev/vdc
mount /vdc
umount /vdc
It causes:
WARNING: CPU: 1 PID: 336 at fs/iomap/buffered-io.c:1534
CPU: 1 PID: 336 Comm: xfsaild/vdc Not tainted 5.6.0-rc5 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20191223_100556-anatol 04/01/2014
RIP: 0010:iomap_do_writepage+0x16b/0x1f0 fs/iomap/buffered-io.c:1534
[...]
Call Trace:
write_cache_pages+0x189/0x4d0 mm/page-writeback.c:2238
iomap_writepages+0x1c/0x33 fs/iomap/buffered-io.c:1642
xfs_vm_writepages+0x65/0x90 fs/xfs/xfs_aops.c:578
do_writepages+0x41/0xe0 mm/page-writeback.c:2344
__filemap_fdatawrite_range+0xd2/0x120 mm/filemap.c:421
file_write_and_wait_range+0x71/0xc0 mm/filemap.c:760
xfs_file_fsync+0x7a/0x2b0 fs/xfs/xfs_file.c:114
generic_write_sync include/linux/fs.h:2867 [inline]
xfs_file_buffered_aio_write+0x379/0x3b0 fs/xfs/xfs_file.c:691
call_write_iter include/linux/fs.h:1901 [inline]
new_sync_write+0x130/0x1d0 fs/read_write.c:483
__kernel_write+0x54/0xe0 fs/read_write.c:515
do_acct_process+0x122/0x170 kernel/acct.c:522
slow_acct_process kernel/acct.c:581 [inline]
acct_process+0x1d4/0x27c kernel/acct.c:607
do_exit+0x83d/0xbc0 kernel/exit.c:791
kthread+0xf1/0x140 kernel/kthread.c:257
ret_from_fork+0x27/0x50 arch/x86/entry/entry_64.S:352
This bug was originally reported by syzbot at
https://lore.kernel.org/r/0000000000000e7156059f751d7b@google.com.
Reported-by: syzbot+1f9dc49e8de2582d90c2@syzkaller.appspotmail.com
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4b674b9ac852937af1f8c62f730c325fb6eadcdb upstream.
The filesystem freeze sequence in XFS waits on any background
eofblocks or cowblocks scans to complete before the filesystem is
quiesced. At this point, the freezer has already stopped the
transaction subsystem, however, which means a truncate or cowblock
cancellation in progress is likely blocked in transaction
allocation. This results in a deadlock between freeze and the
associated scanner.
Fix this problem by holding superblock write protection across calls
into the block reapers. Since protection for background scans is
acquired from the workqueue task context, trylock to avoid a similar
deadlock between freeze and blocking on the write lock.
Fixes: d6b636ebb1c9f ("xfs: halt auto-reclamation activities while rebuilding rmap")
Reported-by: Paul Furtado <paulfurtado91@gmail.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Chandan Rajendra <chandanrlinux@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Collins <allison.henderson@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit e1e8399eee72e9d5246d4d1bcacd793debe34dd3 upstream.
New struct nfsd4_blocked_lock allocated in find_or_allocate_block()
does not initialized nbl_list and nbl_lru.
If conflock allocation fails rollback can call list_del_init()
access uninitialized fields and corrupt memory.
v2: just initialize nbl_list and nbl_lru right after nbl allocation.
Fixes: 76d348fadff5 ("nfsd: have nfsd4_lock use blocking locks for v4.1+ lock")
Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bc56ad8c74b8588685c2875de0df8ab6974828ef upstream.
When performing rename operation with RENAME_WHITEOUT flag, we will
hold AGF lock to allocate or free extents in manipulating the dirents
firstly, and then doing the xfs_iunlink_remove() call last to hold
AGI lock to modify the tmpfile info, so we the lock order AGI->AGF.
The big problem here is that we have an ordering constraint on AGF
and AGI locking - inode allocation locks the AGI, then can allocate
a new extent for new inodes, locking the AGF after the AGI. Hence
the ordering that is imposed by other parts of the code is AGI before
AGF. So we get an ABBA deadlock between the AGI and AGF here.
Process A:
Call trace:
? __schedule+0x2bd/0x620
schedule+0x33/0x90
schedule_timeout+0x17d/0x290
__down_common+0xef/0x125
? xfs_buf_find+0x215/0x6c0 [xfs]
down+0x3b/0x50
xfs_buf_lock+0x34/0xf0 [xfs]
xfs_buf_find+0x215/0x6c0 [xfs]
xfs_buf_get_map+0x37/0x230 [xfs]
xfs_buf_read_map+0x29/0x190 [xfs]
xfs_trans_read_buf_map+0x13d/0x520 [xfs]
xfs_read_agf+0xa6/0x180 [xfs]
? schedule_timeout+0x17d/0x290
xfs_alloc_read_agf+0x52/0x1f0 [xfs]
xfs_alloc_fix_freelist+0x432/0x590 [xfs]
? down+0x3b/0x50
? xfs_buf_lock+0x34/0xf0 [xfs]
? xfs_buf_find+0x215/0x6c0 [xfs]
xfs_alloc_vextent+0x301/0x6c0 [xfs]
xfs_ialloc_ag_alloc+0x182/0x700 [xfs]
? _xfs_trans_bjoin+0x72/0xf0 [xfs]
xfs_dialloc+0x116/0x290 [xfs]
xfs_ialloc+0x6d/0x5e0 [xfs]
? xfs_log_reserve+0x165/0x280 [xfs]
xfs_dir_ialloc+0x8c/0x240 [xfs]
xfs_create+0x35a/0x610 [xfs]
xfs_generic_create+0x1f1/0x2f0 [xfs]
...
Process B:
Call trace:
? __schedule+0x2bd/0x620
? xfs_bmapi_allocate+0x245/0x380 [xfs]
schedule+0x33/0x90
schedule_timeout+0x17d/0x290
? xfs_buf_find+0x1fd/0x6c0 [xfs]
__down_common+0xef/0x125
? xfs_buf_get_map+0x37/0x230 [xfs]
? xfs_buf_find+0x215/0x6c0 [xfs]
down+0x3b/0x50
xfs_buf_lock+0x34/0xf0 [xfs]
xfs_buf_find+0x215/0x6c0 [xfs]
xfs_buf_get_map+0x37/0x230 [xfs]
xfs_buf_read_map+0x29/0x190 [xfs]
xfs_trans_read_buf_map+0x13d/0x520 [xfs]
xfs_read_agi+0xa8/0x160 [xfs]
xfs_iunlink_remove+0x6f/0x2a0 [xfs]
? current_time+0x46/0x80
? xfs_trans_ichgtime+0x39/0xb0 [xfs]
xfs_rename+0x57a/0xae0 [xfs]
xfs_vn_rename+0xe4/0x150 [xfs]
...
In this patch we move the xfs_iunlink_remove() call to
before acquiring the AGF lock to preserve correct AGI/AGF locking
order.
[Minor massage required due to upstream change making xfs_bumplink() a
void function where as in the 4.19.y tree the return value is checked,
even though it is always zero. Only change was to the last code block
removed by the patch. Functionally equivalent to upstream.]
Signed-off-by: kaixuxia <kaixuxia@tencent.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Suraj Jitindar Singh <surajjs@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit bdebd6a2831b6fab69eb85cee74a8ba77f1a1cc2 upstream.
remap_vmalloc_range() has had various issues with the bounds checks it
promises to perform ("This function checks that addr is a valid
vmalloc'ed area, and that it is big enough to cover the vma") over time,
e.g.:
- not detecting pgoff<<PAGE_SHIFT overflow
- not detecting (pgoff<<PAGE_SHIFT)+usize overflow
- not checking whether addr and addr+(pgoff<<PAGE_SHIFT) are the same
vmalloc allocation
- comparing a potentially wildly out-of-bounds pointer with the end of
the vmalloc region
In particular, since commit fc9702273e2e ("bpf: Add mmap() support for
BPF_MAP_TYPE_ARRAY"), unprivileged users can cause kernel null pointer
dereferences by calling mmap() on a BPF map with a size that is bigger
than the distance from the start of the BPF map to the end of the
address space.
This could theoretically be used as a kernel ASLR bypass, by using
whether mmap() with a given offset oopses or returns an error code to
perform a binary search over the possible address range.
To allow remap_vmalloc_range_partial() to verify that addr and
addr+(pgoff<<PAGE_SHIFT) are in the same vmalloc region, pass the offset
to remap_vmalloc_range_partial() instead of adding it to the pointer in
remap_vmalloc_range().
In remap_vmalloc_range_partial(), fix the check against
get_vm_area_size() by using size comparisons instead of pointer
comparisons, and add checks for pgoff.
Fixes: 833423143c3a ("[PATCH] mm: introduce remap_vmalloc_range()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@chromium.org>
Link: http://lkml.kernel.org/r/20200415222312.236431-1-jannh@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A race condition between threads updating mountpoint reference counter
affects longterm releases 4.4.220, 4.9.220, 4.14.177 and 4.19.118.
The mountpoint reference counter corruption may occur when:
* one thread increments m_count member of struct mountpoint
[under namespace_sem, but not holding mount_lock]
pivot_root()
* another thread simultaneously decrements the same m_count
[under mount_lock, but not holding namespace_sem]
put_mountpoint()
unhash_mnt()
umount_mnt()
mntput_no_expire()
To fix this race condition, grab mount_lock before updating m_count in
pivot_root().
Reference: CVE-2020-12114
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Piotr Krysiuk <piotras@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 688078e7f36c293dae25b338ddc9e0a2790f6e06 upstream.
In f2fs_listxattr, there is no boundary check before
memcpy e_name to buffer.
If the e_name_len is corrupted,
unexpected memory contents may be returned to the buffer.
Signed-off-by: Randall Huang <huangrandall@google.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[bwh: Backported to 4.19: Use f2fs_msg() instead of f2fs_err()]
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0aa971b6fd3f92afef6afe24ef78d9bb14471519 ]
1. try_get_cap_refs() fails to get caps and finds that mds_wanted
does not include what it wants. It returns -ESTALE.
2. ceph_get_caps() calls ceph_renew_caps(). ceph_renew_caps() finds
that inode has cap, so it calls ceph_check_caps().
3. ceph_check_caps() finds that issued caps (without checking if it's
stale) already includes caps wanted by open file, so it skips
updating wanted caps.
Above events can cause an infinite loop inside ceph_get_caps().
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c6d50296032f0b97473eb2e274dc7cc5d0173847 ]
Return the error returned by ceph_mdsc_do_request(). Otherwise,
r_target_inode ends up being NULL this ends up returning ENOENT
regardless of the error.
Signed-off-by: Qiujun Huang <hqjagain@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4068664e3cd2312610ceac05b74c4cf1853b8325 ]
Extents are cached in read_extent_tree_block(); as a result, extents
are not cached for inodes with depth == 0 when we try to find the
extent using ext4_find_extent(). The result of the lookup is cached
in ext4_map_blocks() but is only a subset of the extent on disk. As a
result, the contents of extents status cache can get very badly
fragmented for certain workloads, such as a random 4k read workload.
File size of /mnt/test is 33554432 (8192 blocks of 4096 bytes)
ext: logical_offset: physical_offset: length: expected: flags:
0: 0.. 8191: 40960.. 49151: 8192: last,eof
$ perf record -e 'ext4:ext4_es_*' /root/bin/fio --name=t --direct=0 --rw=randread --bs=4k --filesize=32M --size=32M --filename=/mnt/test
$ perf script | grep ext4_es_insert_extent | head -n 10
fio 131 [000] 13.975421: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [494/1) mapped 41454 status W
fio 131 [000] 13.975939: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6064/1) mapped 47024 status W
fio 131 [000] 13.976467: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6907/1) mapped 47867 status W
fio 131 [000] 13.976937: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3850/1) mapped 44810 status W
fio 131 [000] 13.977440: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3292/1) mapped 44252 status W
fio 131 [000] 13.977931: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [6882/1) mapped 47842 status W
fio 131 [000] 13.978376: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [3117/1) mapped 44077 status W
fio 131 [000] 13.978957: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [2896/1) mapped 43856 status W
fio 131 [000] 13.979474: ext4:ext4_es_insert_extent: dev 253,0 ino 12 es [7479/1) mapped 48439 status W
Fix this by caching the extents for inodes with depth == 0 in
ext4_find_extent().
[ Renamed ext4_es_cache_extents() to ext4_cache_extents() since this
newly added function is not in extents_cache.c, and to avoid
potential visual confusion with ext4_es_cache_extent(). -TYT ]
Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Link: https://lore.kernel.org/r/20191106122502.19986-1-dmonakhov@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit dc5a941223edd803f476a153abd950cc3a83c3e1 ]
There is a race condition that we may miss to wait for all node pages
writeback, fix it.
- fsync() - shrink
- f2fs_do_sync_file
- __write_node_page
- set_page_writeback(page#0)
: remove DIRTY/TOWRITE flag
- f2fs_fsync_node_pages
: won't find page #0 as TOWRITE flag was removeD
- f2fs_wait_on_node_pages_writeback
: wont' wait page #0 writeback as it was not in fsync_node_list list.
- f2fs_add_fsync_node_entry
Fixes: 50fa53eccf9f ("f2fs: fix to avoid broken of dnode block list")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 32302085a8d90859c40cf1a5e8313f575d06ec75 ]
Fix a debug-only build error in ext2/xattr.c:
When building without extra debugging, (and with another patch that uses
no_printk() instead of <empty> for the ext2-xattr debug-print macros,
this build error happens:
../fs/ext2/xattr.c: In function ‘ext2_xattr_cache_insert’:
../fs/ext2/xattr.c:869:18: error: ‘ext2_xattr_cache’ undeclared (first use in
this function); did you mean ‘ext2_xattr_list’?
atomic_read(&ext2_xattr_cache->c_entry_count));
Fix the problem by removing cached entry count from the debug message
since otherwise we'd have to export the mbcache structure just for that.
Fixes: be0726d33cb8 ("ext2: convert to mbcache2")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 44a52022e7f15cbaab957df1c14f7a4f527ef7cf ]
When EXT2_ATTR_DEBUG is not defined, modify the 2 debug macros
to use the no_printk() macro instead of <nothing>.
This fixes gcc warnings when -Wextra is used:
../fs/ext2/xattr.c:252:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:258:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:330:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
../fs/ext2/xattr.c:872:45: warning: suggest braces around empty body in an ‘else’ statement [-Wempty-body]
I have verified that the only object code change (with gcc 7.5.0) is
the reversal of some instructions from 'cmp a,b' to 'cmp b,a'.
Link: https://lore.kernel.org/r/e18a7395-61fb-2093-18e8-ed4f8cf56248@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jan Kara <jack@suse.com>
Cc: linux-ext4@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 62f63eea291b50a5677ae7503ac128803174698a ]
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:f2fs_write_begin+0x823/0xb90 [f2fs]
Call Trace:
f2fs_quota_write+0x139/0x1d0 [f2fs]
write_blk+0x36/0x80 [quota_tree]
get_free_dqblk+0x42/0xa0 [quota_tree]
do_insert_tree+0x235/0x4a0 [quota_tree]
do_insert_tree+0x26e/0x4a0 [quota_tree]
do_insert_tree+0x26e/0x4a0 [quota_tree]
do_insert_tree+0x26e/0x4a0 [quota_tree]
qtree_write_dquot+0x70/0x190 [quota_tree]
v2_write_dquot+0x43/0x90 [quota_v2]
dquot_acquire+0x77/0x100
f2fs_dquot_acquire+0x2f/0x60 [f2fs]
dqget+0x310/0x450
dquot_transfer+0x7e/0x120
f2fs_setattr+0x11a/0x4a0 [f2fs]
notify_change+0x349/0x480
chown_common+0x168/0x1c0
do_fchownat+0xbc/0xf0
__x64_sys_fchownat+0x20/0x30
do_syscall_64+0x5f/0x220
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Passing fsdata parameter to .write_{begin,end} in f2fs_quota_write(),
so that if quota file is compressed one, we can avoid above NULL
pointer dereference when updating quota content.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 862f35c94730c9270833f3ad05bd758a29f204ed ]
If we just set the mirror count to 1 without first clearing out
the mirrors, we can leak queued up requests.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3946d0d04bb360acca72db5efe9ae8440012d9dc ]
When encryption is used, smb2_transform_hdr is defined on the stack and is
passed to the transport. This doesn't work with RDMA as the buffer needs to
be DMA'ed.
Fix it by using kmalloc.
Signed-off-by: Long Li <longli@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c96e2b8564adfb8ac14469ebc51ddc1bfecb3ae2 ]
Under some circumstances we may encounter a filesystem error on a
read-only block device, and if we try to save the error info to the
superblock and commit it, we'll wind up with a noisy error and
backtrace, i.e.:
[ 3337.146838] EXT4-fs error (device pmem1p2): ext4_get_journal_inode:4634: comm mount: inode #0: comm mount: iget: illegal inode #
------------[ cut here ]------------
generic_make_request: Trying to write to read-only block-device pmem1p2 (partno 2)
WARNING: CPU: 107 PID: 115347 at block/blk-core.c:788 generic_make_request_checks+0x6b4/0x7d0
...
To avoid this, commit the error info in the superblock only if the
block device is writable.
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Link: https://lore.kernel.org/r/4b6e774d-cc00-3469-7abb-108eb151071a@sandeen.net
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8605cf0e852af3b2c771c18417499dc4ceed03d5 ]
When dreq is allocated by nfs_direct_req_alloc(), dreq->kref is
initialized to 2. Therefore we need to call nfs_direct_req_release()
twice to release the allocated dreq. Usually it is called in
nfs_file_direct_{read, write}() and nfs_direct_complete().
However, current code only calls nfs_direct_req_relese() once if
nfs_get_lock_context() fails in nfs_file_direct_{read, write}().
So, that case would result in memory leak.
Fix this by adding the missing call.
Signed-off-by: Misono Tomohiro <misono.tomohiro@jp.fujitsu.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d911c57a19551c6bef116a3b55c6b089901aacb0 ]
Make sure to test the stateid for validity so that we catch instances
where the server may have been reusing stateids in
nfs_layout_find_inode_by_stateid().
Fixes: 7b410d9ce460 ("pNFS: Delay getting the layout header in CB_LAYOUTRECALL handlers")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit d87f639258a6a5980183f11876c884931ad93da2 upstream.
Since commit a8ac900b8163 ("ext4: use non-movable memory for the
superblock") buffers for ext4 superblock were allocated using
the sb_bread_unmovable() helper which allocated buffer heads
out of non-movable memory blocks. It was necessarily to not block
page migrations and do not cause cma allocation failures.
However commit 85c8f176a611 ("ext4: preload block group descriptors")
broke this by introducing pre-reading of the ext4 superblock.
The problem is that __breadahead() is using __getblk() underneath,
which allocates buffer heads out of movable memory.
It resulted in page migration failures I've seen on a machine
with an ext4 partition and a preallocated cma area.
Fix this by introducing sb_breadahead_unmovable() and
__breadahead_gfp() helpers which use non-movable memory for buffer
head allocations and use them for the ext4 superblock readahead.
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Fixes: 85c8f176a611 ("ext4: preload block group descriptors")
Signed-off-by: Roman Gushchin <guro@fb.com>
Link: https://lore.kernel.org/r/20200229001411.128010-1-guro@fb.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 801674f34ecfed033b062a0f217506b93c8d5e8a upstream.
We do not want to create initialized extents beyond end of file because
for e2fsck it is impossible to distinguish them from a case of corrupted
file size / extent tree and so it complains like:
Inode 12, i_size is 147456, should be 163840. Fix? no
Code in ext4_ext_convert_to_initialized() and
ext4_split_convert_extents() try to make sure it does not create
initialized extents beyond inode size however they check against
inode->i_size which is wrong. They should instead check against
EXT4_I(inode)->i_disksize which is the current inode size on disk.
That's what e2fsck is going to see in case of crash before all dirty
data is written. This bug manifests as generic/456 test failure (with
recent enough fstests where fsx got fixed to properly pass
FALLOC_KEEP_SIZE_FL flags to the kernel) when run with dioread_lock
mount option.
CC: stable@vger.kernel.org
Fixes: 21ca087a3891 ("ext4: Do not zero out uninitialized extents beyond i_size")
Reviewed-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20200331105016.8674-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4d4225fc228e46948486d8b8207955f0c031b92e upstream.
Previously we would set the reloc root's last snapshot to transid - 1.
However there was a problem with doing this, and we changed it to
setting the last snapshot to the generation of the commit node of the fs
root.
This however broke should_ignore_root(). The assumption is that if we
are in a generation newer than when the reloc root was created, then we
would find the reloc root through normal backref lookups, and thus can
ignore any fs roots we find with an old enough reloc root.
Now that the last snapshot could be considerably further in the past
than before, we'd end up incorrectly ignoring an fs root. Thus we'd
find no nodes for the bytenr we were searching for, and we'd fail to
relocate anything. We'd loop through the relocate code again and see
that there were still used space in that block group, attempt to
relocate those bytenr's again, fail in the same way, and just loop like
this forever. This is tricky in that we have to not modify the fs root
at all during this time, so we need to have a block group that has data
in this fs root that is not shared by any other root, which is why this
has been difficult to reproduce.
Fixes: 054570a1dc94 ("Btrfs: fix relocation incorrectly dropping data references")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit b9c538da4e52a7b79dfcf4cfa487c46125066dfb upstream.
If ext4_fill_super detects an invalid number of inodes per group, the
resulting error message printed the number of blocks per group, rather
than the number of inodes per group. Fix it to print the correct value.
Fixes: cd6bb35bf7f6d ("ext4: use more strict checks for inodes_per_block on mount")
Link: https://lore.kernel.org/r/8be03355983a08e5d4eed480944613454d7e2550.1585434649.git.josh@joshtriplett.org
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit df41460a21b06a76437af040d90ccee03888e8e5 upstream.
ext4_fill_super doublechecks the number of groups before mounting; if
that check fails, the resulting error message prints the group count
from the ext4_sb_info sbi, which hasn't been set yet. Print the freshly
computed group count instead (which at that point has just been computed
in "blocks_count").
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Fixes: 4ec1102813798 ("ext4: Add sanity checks for the superblock before mounting the filesystem")
Link: https://lore.kernel.org/r/8b957cd1513fcc4550fe675c10bcce2175c33a49.1585431964.git.josh@joshtriplett.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 780f66e59231fcf882f36c63f287252ee47cc75a upstream.
Improve comments in jbd2_journal_commit_transaction() to describe why
we don't need to clear the buffer_mapped bit for freeing file mapping
buffers whose page mapping is NULL.
Link: https://lore.kernel.org/r/20200217112706.20085-1-yi.zhang@huawei.com
Fixes: c96dceeabf76 ("jbd2: do not clear the BH_Mapped flag when forgetting a metadata buffer")
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: zhangyi (F) <yi.zhang@huawei.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 300b124fcf6ad2cd99a7b721e0f096785e0a3134 upstream.
Commit 6dde1e42f497 ("ovl: make i_ino consistent with st_ino in more
cases"), relaxed the condition nfs_export=on in order to set the value of
i_ino to xino map of real ino.
Specifically, it also relaxed the pre-condition that index=on for
consistent i_ino. This opened the corner case of lower hardlink in
ovl_get_inode(), which calls ovl_fill_inode() with ino=0 and then
ovl_init_inode() is called to set i_ino to lower real ino without the xino
mapping.
Pass the correct values of ino;fsid in this case to ovl_fill_inode(), so it
can initialize i_ino correctly.
Fixes: 6dde1e42f497 ("ovl: make i_ino consistent with st_ino in more ...")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 351cbf6e4410e7ece05e35d0a07320538f2418b4 ]
Zygo reported the following lockdep splat while testing the balance
patches
======================================================
WARNING: possible circular locking dependency detected
5.6.0-c6f0579d496a+ #53 Not tainted
------------------------------------------------------
kswapd0/1133 is trying to acquire lock:
ffff888092f622c0 (&delayed_node->mutex){+.+.}, at: __btrfs_release_delayed_node+0x7c/0x5b0
but task is already holding lock:
ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (fs_reclaim){+.+.}:
fs_reclaim_acquire.part.91+0x29/0x30
fs_reclaim_acquire+0x19/0x20
kmem_cache_alloc_trace+0x32/0x740
add_block_entry+0x45/0x260
btrfs_ref_tree_mod+0x6e2/0x8b0
btrfs_alloc_tree_block+0x789/0x880
alloc_tree_block_no_bg_flush+0xc6/0xf0
__btrfs_cow_block+0x270/0x940
btrfs_cow_block+0x1ba/0x3a0
btrfs_search_slot+0x999/0x1030
btrfs_insert_empty_items+0x81/0xe0
btrfs_insert_delayed_items+0x128/0x7d0
__btrfs_run_delayed_items+0xf4/0x2a0
btrfs_run_delayed_items+0x13/0x20
btrfs_commit_transaction+0x5cc/0x1390
insert_balance_item.isra.39+0x6b2/0x6e0
btrfs_balance+0x72d/0x18d0
btrfs_ioctl_balance+0x3de/0x4c0
btrfs_ioctl+0x30ab/0x44a0
ksys_ioctl+0xa1/0xe0
__x64_sys_ioctl+0x43/0x50
do_syscall_64+0x77/0x2c0
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #0 (&delayed_node->mutex){+.+.}:
__lock_acquire+0x197e/0x2550
lock_acquire+0x103/0x220
__mutex_lock+0x13d/0xce0
mutex_lock_nested+0x1b/0x20
__btrfs_release_delayed_node+0x7c/0x5b0
btrfs_remove_delayed_node+0x49/0x50
btrfs_evict_inode+0x6fc/0x900
evict+0x19a/0x2c0
dispose_list+0xa0/0xe0
prune_icache_sb+0xbd/0xf0
super_cache_scan+0x1b5/0x250
do_shrink_slab+0x1f6/0x530
shrink_slab+0x32e/0x410
shrink_node+0x2a5/0xba0
balance_pgdat+0x4bd/0x8a0
kswapd+0x35a/0x800
kthread+0x1e9/0x210
ret_from_fork+0x3a/0x50
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(fs_reclaim);
lock(&delayed_node->mutex);
lock(fs_reclaim);
lock(&delayed_node->mutex);
*** DEADLOCK ***
3 locks held by kswapd0/1133:
#0: ffffffff8fc5f860 (fs_reclaim){+.+.}, at: __fs_reclaim_acquire+0x5/0x30
#1: ffffffff8fc380d8 (shrinker_rwsem){++++}, at: shrink_slab+0x1e8/0x410
#2: ffff8881e0e6c0e8 (&type->s_umount_key#42){++++}, at: trylock_super+0x1b/0x70
stack backtrace:
CPU: 2 PID: 1133 Comm: kswapd0 Not tainted 5.6.0-c6f0579d496a+ #53
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Call Trace:
dump_stack+0xc1/0x11a
print_circular_bug.isra.38.cold.57+0x145/0x14a
check_noncircular+0x2a9/0x2f0
? print_circular_bug.isra.38+0x130/0x130
? stack_trace_consume_entry+0x90/0x90
? save_trace+0x3cc/0x420
__lock_acquire+0x197e/0x2550
? btrfs_inode_clear_file_extent_range+0x9b/0xb0
? register_lock_class+0x960/0x960
lock_acquire+0x103/0x220
? __btrfs_release_delayed_node+0x7c/0x5b0
__mutex_lock+0x13d/0xce0
? __btrfs_release_delayed_node+0x7c/0x5b0
? __asan_loadN+0xf/0x20
? pvclock_clocksource_read+0xeb/0x190
? __btrfs_release_delayed_node+0x7c/0x5b0
? mutex_lock_io_nested+0xc20/0xc20
? __kasan_check_read+0x11/0x20
? check_chain_key+0x1e6/0x2e0
mutex_lock_nested+0x1b/0x20
? mutex_lock_nested+0x1b/0x20
__btrfs_release_delayed_node+0x7c/0x5b0
btrfs_remove_delayed_node+0x49/0x50
btrfs_evict_inode+0x6fc/0x900
? btrfs_setattr+0x840/0x840
? do_raw_spin_unlock+0xa8/0x140
evict+0x19a/0x2c0
dispose_list+0xa0/0xe0
prune_icache_sb+0xbd/0xf0
? invalidate_inodes+0x310/0x310
super_cache_scan+0x1b5/0x250
do_shrink_slab+0x1f6/0x530
shrink_slab+0x32e/0x410
? do_shrink_slab+0x530/0x530
? do_shrink_slab+0x530/0x530
? __kasan_check_read+0x11/0x20
? mem_cgroup_protected+0x13d/0x260
shrink_node+0x2a5/0xba0
balance_pgdat+0x4bd/0x8a0
? mem_cgroup_shrink_node+0x490/0x490
? _raw_spin_unlock_irq+0x27/0x40
? finish_task_switch+0xce/0x390
? rcu_read_lock_bh_held+0xb0/0xb0
kswapd+0x35a/0x800
? _raw_spin_unlock_irqrestore+0x4c/0x60
? balance_pgdat+0x8a0/0x8a0
? finish_wait+0x110/0x110
? __kasan_check_read+0x11/0x20
? __kthread_parkme+0xc6/0xe0
? balance_pgdat+0x8a0/0x8a0
kthread+0x1e9/0x210
? kthread_create_worker_on_cpu+0xc0/0xc0
ret_from_fork+0x3a/0x50
This is because we hold that delayed node's mutex while doing tree
operations. Fix this by just wrapping the searches in nofs.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 25efb2ffdf991177e740b2f63e92b4ec7d310a92 upstream.
When removing files containing extended attributes, the hfsplus driver may
remove the wrong entries from the attributes b-tree, causing major
filesystem damage and in some cases even kernel crashes.
To remove a file, all its extended attributes have to be removed as well.
The driver does this by looking up all keys in the attributes b-tree with
the cnid of the file. Each of these entries then gets deleted using the
key used for searching, which doesn't contain the attribute's name when it
should. Since the key doesn't contain the name, the deletion routine will
not find the correct entry and instead remove the one in front of it. If
parent nodes have to be modified, these become corrupt as well. This
causes invalid links and unsorted entries that not even macOS's fsck_hfs
is able to fix.
To fix this, modify the search key before an entry is deleted from the
attributes b-tree by copying the found entry's key into the search key,
therefore ensuring that the correct entry gets removed from the tree.
Signed-off-by: Simon Gander <simon@tuxera.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Anton Altaparmakov <anton@tuxera.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200327155541.1521-1-simon@tuxera.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 783fda856e1034dee90a873f7654c418212d12d7 upstream.
Linux fallocate(2) with FALLOC_FL_PUNCH_HOLE mode set, its offset can
exceed the inode size. Ocfs2 now doesn't allow that offset beyond inode
size. This restriction is not necessary and violates fallocate(2)
semantics.
If fallocate(2) offset is beyond inode size, just return success and do
nothing further.
Otherwise, ocfs2 will crash the kernel.
kernel BUG at fs/ocfs2//alloc.c:7264!
ocfs2_truncate_inline+0x20f/0x360 [ocfs2]
ocfs2_remove_inode_range+0x23c/0xcb0 [ocfs2]
__ocfs2_change_file_space+0x4a5/0x650 [ocfs2]
ocfs2_fallocate+0x83/0xa0 [ocfs2]
vfs_fallocate+0x148/0x230
SyS_fallocate+0x48/0x80
do_syscall_64+0x79/0x170
Signed-off-by: Changwei Ge <chge@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Gang He <ghe@suse.com>
Cc: Jun Piao <piaojun@huawei.com>
Cc: <stable@vger.kernel.org>
Link: http://lkml.kernel.org/r/20200407082754.17565-1-chge@linux.alibaba.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 26c5d78c976ca298e59a56f6101a97b618ba3539 upstream.
After request_module(), nothing is stopping the module from being
unloaded until someone takes a reference to it via try_get_module().
The WARN_ONCE() in get_fs_type() is thus user-reachable, via userspace
running 'rmmod' concurrently.
Since WARN_ONCE() is for kernel bugs only, not for user-reachable
situations, downgrade this warning to pr_warn_once().
Keep it printed once only, since the intent of this warning is to detect
a bug in modprobe at boot time. Printing the warning more than once
wouldn't really provide any useful extra information.
Fixes: 41124db869b7 ("fs: warn in case userspace lied about modprobe return")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Jessica Yu <jeyu@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeff Vander Stoep <jeffv@google.com>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: NeilBrown <neilb@suse.com>
Cc: <stable@vger.kernel.org> [4.13+]
Link: http://lkml.kernel.org/r/20200312202552.241885-3-ebiggers@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 28936b62e71e41600bab319f262ea9f9b1027629 upstream.
inode->i_blocks could be accessed concurrently as noticed by KCSAN,
BUG: KCSAN: data-race in ext4_do_update_inode [ext4] / inode_add_bytes
write to 0xffff9a00d4b982d0 of 8 bytes by task 22100 on cpu 118:
inode_add_bytes+0x65/0xf0
__inode_add_bytes at fs/stat.c:689
(inlined by) inode_add_bytes at fs/stat.c:702
ext4_mb_new_blocks+0x418/0xca0 [ext4]
ext4_ext_map_blocks+0x1a6b/0x27b0 [ext4]
ext4_map_blocks+0x1a9/0x950 [ext4]
_ext4_get_block+0xfc/0x270 [ext4]
ext4_get_block_unwritten+0x33/0x50 [ext4]
__block_write_begin_int+0x22e/0xae0
__block_write_begin+0x39/0x50
ext4_write_begin+0x388/0xb50 [ext4]
ext4_da_write_begin+0x35f/0x8f0 [ext4]
generic_perform_write+0x15d/0x290
ext4_buffered_write_iter+0x11f/0x210 [ext4]
ext4_file_write_iter+0xce/0x9e0 [ext4]
new_sync_write+0x29c/0x3b0
__vfs_write+0x92/0xa0
vfs_write+0x103/0x260
ksys_write+0x9d/0x130
__x64_sys_write+0x4c/0x60
do_syscall_64+0x91/0xb05
entry_SYSCALL_64_after_hwframe+0x49/0xbe
read to 0xffff9a00d4b982d0 of 8 bytes by task 8 on cpu 65:
ext4_do_update_inode+0x4a0/0xf60 [ext4]
ext4_inode_blocks_set at fs/ext4/inode.c:4815
ext4_mark_iloc_dirty+0xaf/0x160 [ext4]
ext4_mark_inode_dirty+0x129/0x3e0 [ext4]
ext4_convert_unwritten_extents+0x253/0x2d0 [ext4]
ext4_convert_unwritten_io_end_vec+0xc5/0x150 [ext4]
ext4_end_io_rsv_work+0x22c/0x350 [ext4]
process_one_work+0x54f/0xb90
worker_thread+0x80/0x5f0
kthread+0x1cd/0x1f0
ret_from_fork+0x27/0x50
4 locks held by kworker/u256:0/8:
#0: ffff9a025abc4328 ((wq_completion)ext4-rsv-conversion){+.+.}, at: process_one_work+0x443/0xb90
#1: ffffab5a862dbe20 ((work_completion)(&ei->i_rsv_conversion_work)){+.+.}, at: process_one_work+0x443/0xb90
#2: ffff9a025a9d0f58 (jbd2_handle){++++}, at: start_this_handle+0x1c1/0x9d0 [jbd2]
#3: ffff9a00d4b985d8 (&(&ei->i_raw_lock)->rlock){+.+.}, at: ext4_do_update_inode+0xaa/0xf60 [ext4]
irq event stamp: 3009267
hardirqs last enabled at (3009267): [<ffffffff980da9b7>] __find_get_block+0x107/0x790
hardirqs last disabled at (3009266): [<ffffffff980da8f9>] __find_get_block+0x49/0x790
softirqs last enabled at (3009230): [<ffffffff98a0034c>] __do_softirq+0x34c/0x57c
softirqs last disabled at (3009223): [<ffffffff97cc67a2>] irq_exit+0xa2/0xc0
Reported by Kernel Concurrency Sanitizer on:
CPU: 65 PID: 8 Comm: kworker/u256:0 Tainted: G L 5.6.0-rc2-next-20200221+ #7
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
Workqueue: ext4-rsv-conversion ext4_end_io_rsv_work [ext4]
The plain read is outside of inode->i_lock critical section which
results in a data race. Fix it by adding READ_ONCE() there.
Link: https://lore.kernel.org/r/20200222043258.2279-1-cai@lca.pw
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit add42de31721fa29ed77a7ce388674d69f9d31a4 upstream.
When we detach a subrequest from the list, we must also release the
reference it holds to the parent.
Fixes: 5b2b5187fa85 ("NFS: Fix nfs_page_group_destroy() and nfs_lock_and_join_requests() race cases")
Cc: stable@vger.kernel.org # v4.14+
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
Eric W. Biederman
Adam McCoy
Dave Wysochanski
Arnd Bergmann
Andreas Gruenbacher
Luis Chamberlain
Ronnie Sahlberg
Qu Wenruo
Filipe Manana
Xiyu Yang
Al Viro
Ritesh Harjani
Theodore Ts'o
yangerkun
Darrick J. Wong
Eric Biggers
Brian Foster
Vasily Averin
kaixuxia
Jann Horn
Piotr Krysiuk
Randall Huang
Yan, Zheng
Qiujun Huang
Dmitry Monakhov
Chao Yu
Jan Kara
Randy Dunlap
Trond Myklebust
Long Li
Eric Sandeen
Misono Tomohiro
Roman Gushchin
Josef Bacik
Josh Triplett
zhangyi (F)
Amir Goldstein
Simon Gander
Changwei Ge
Qian Cai