| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Bruce Ashfield <bruce.ashfield@gmail.com>
|
|
commit 7d048df4e9b05ba89b74d062df59498aa81f3785 upstream.
xfs_btree_sblock_verify_crc is a bool so should not be returning
a failaddr_t; worse, if xfs_log_check_lsn fails it returns
__this_address which looks like a boolean true (i.e. success)
to the caller.
(interestingly xfs_btree_lblock_verify_crc doesn't have the issue)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit a579121f94aba4e8bad1a121a0fad050d6925296 upstream.
In commit e53c4b598, I *tried* to teach xfs to force writeback when we
fzero/fpunch right up to EOF so that if EOF is in the middle of a page,
the post-EOF part of the page gets zeroed before we return to userspace.
Unfortunately, I missed the part where PAGE_MASK is ~(PAGE_SIZE - 1),
which means that we totally fail to zero if we're fpunching and EOF is
within the first page. Worse yet, the same PAGE_MASK thinko plagues the
filemap_write_and_wait_range call, so we'd initiate writeback of the
entire file, which (mostly) masked the thinko.
Drop the tricky PAGE_MASK and replace it with correct usage of PAGE_SIZE
and the proper rounding macros.
Fixes: e53c4b598 ("xfs: ensure post-EOF zeroing happens after zeroing part of a file")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 9230a0b65b47fe6856c4468ec0175c4987e5bede upstream.
Long saga. There have been days spent following this through dead end
after dead end in multi-GB event traces. This morning, after writing
a trace-cmd wrapper that enabled me to be more selective about XFS
trace points, I discovered that I could get just enough essential
tracepoints enabled that there was a 50:50 chance the fsx config
would fail at ~115k ops. If it didn't fail at op 115547, I stopped
fsx at op 115548 anyway.
That gave me two traces - one where the problem manifested, and one
where it didn't. After refining the traces to have the necessary
information, I found that in the failing case there was a real
extent in the COW fork compared to an unwritten extent in the
working case.
Walking back through the two traces to the point where the CWO fork
extents actually diverged, I found that the bad case had an extra
unwritten extent in it. This is likely because the bug it led me to
had triggered multiple times in those 115k ops, leaving stray
COW extents around. What I saw was a COW delalloc conversion to an
unwritten extent (as they should always be through
xfs_iomap_write_allocate()) resulted in a /written extent/:
xfs_writepage: dev 259:0 ino 0x83 pgoff 0x17000 size 0x79a00 offset 0 length 0
xfs_iext_remove: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/2 offset 32 block 152 count 20 flag 1 caller xfs_bmap_add_extent_delay_real
xfs_bmap_pre_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 4503599627239429 count 31 flag 0 caller xfs_bmap_add_extent_delay_real
xfs_bmap_post_update: dev 259:0 ino 0x83 state RC|LF|RF|COW cur 0xffff888247b899c0/1 offset 1 block 121 count 51 flag 0 caller xfs_bmap_add_ex
Basically, Cow fork before:
0 1 32 52
+H+DDDDDDDDDDDD+UUUUUUUUUUU+
PREV RIGHT
COW delalloc conversion allocates:
1 32
+uuuuuuuuuuuu+
NEW
And the result according to the xfs_bmap_post_update trace was:
0 1 32 52
+H+wwwwwwwwwwwwwwwwwwwwwwww+
PREV
Which is clearly wrong - it should be a merged unwritten extent,
not an unwritten extent.
That lead me to look at the LEFT_FILLING|RIGHT_FILLING|RIGHT_CONTIG
case in xfs_bmap_add_extent_delay_real(), and sure enough, there's
the bug.
It takes the old delalloc extent (PREV) and adds the length of the
RIGHT extent to it, takes the start block from NEW, removes the
RIGHT extent and then updates PREV with the new extent.
What it fails to do is update PREV.br_state. For delalloc, this is
always XFS_EXT_NORM, while in this case we are converting the
delayed allocation to unwritten, so it needs to be updated to
XFS_EXT_UNWRITTEN. This LF|RF|RC case does not do this, and so
the resultant extent is always written.
And that's the bug I've been chasing for a week - a bmap btree bug,
not a reflink/dedupe/copy_file_range bug, but a BMBT bug introduced
with the recent in core extent tree scalability enhancements.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit d43aaf1685aa471f0593685c9f54d53e3af3cf3f upstream.
When retrying a failed inode or dquot buffer,
xfs_buf_resubmit_failed_buffers() clears all the failed flags from
the inde/dquot log items. In doing so, it also drops all the
reference counts on the buffer that the failed log items hold. This
means it can drop all the active references on the buffer and hence
free the buffer before it queues it for write again.
Putting the buffer on the delwri queue takes a reference to the
buffer (so that it hangs around until it has been written and
completed), but this goes bang if the buffer has already been freed.
Hence we need to add the buffer to the delwri queue before we remove
the failed flags from the log items attached to the buffer to ensure
it always remains referenced during the resubmit process.
Reported-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 59e4293149106fb92530f8e56fa3992d8548c5e6 upstream.
Page writeback indirectly handles shared extents via the existence
of overlapping COW fork blocks. If COW fork blocks exist, writeback
always performs the associated copy-on-write regardless if the
underlying blocks are actually shared. If the blocks are shared,
then overlapping COW fork blocks must always exist.
fstests shared/010 reproduces a case where a buffered write occurs
over a shared block without performing the requisite COW fork
reservation. This ultimately causes writeback to the shared extent
and data corruption that is detected across md5 checks of the
filesystem across a mount cycle.
The problem occurs when a buffered write lands over a shared extent
that crosses an extent size hint boundary and that also happens to
have a partial COW reservation that doesn't cover the start and end
blocks of the data fork extent.
For example, a buffered write occurs across the file offset (in FSB
units) range of [29, 57]. A shared extent exists at blocks [29, 35]
and COW reservation already exists at blocks [32, 34]. After
accommodating a COW extent size hint of 32 blocks and the existing
reservation at offset 32, xfs_reflink_reserve_cow() allocates 32
blocks of reservation at offset 0 and returns with COW reservation
across the range of [0, 34]. The associated data fork extent is
still [29, 35], however, which isn't fully covered by the COW
reservation.
This leads to a buffered write at file offset 35 over a shared
extent without associated COW reservation. Writeback eventually
kicks in, performs an overwrite of the underlying shared block and
causes the associated data corruption.
Update xfs_reflink_reserve_cow() to accommodate the fact that a
delalloc allocation request may not fully cover the extent in the
data fork. Trim the data fork extent appropriately, just as is done
for shared extent boundaries and/or existing COW reservations that
happen to overlap the start of the data fork extent. This prevents
shared/010 failures due to data corruption on reflink enabled
filesystems.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 132bf6723749f7219c399831eeb286dbbb985429 upstream.
In this function, once 'buf' has been allocated, we unconditionally
return 0.
However, 'error' is set to some error codes in several error handling
paths.
Before commit 232b51948b99 ("xfs: simplify the xfs_getbmap interface")
this was not an issue because all error paths were returning directly,
but now that some cleanup at the end may be needed, we must propagate the
error code.
Fixes: 232b51948b99 ("xfs: simplify the xfs_getbmap interface")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
commit 41657e5507b13e963be906d5d874f4f02374fd5c upstream.
The addition of FIBT, RMAP and REFCOUNT changed the offsets into
__xfssats structure.
This caused xqmstat_proc_show() to display garbage data via
/proc/fs/xfs/xqmstat, once it relies on the offsets marked via macros.
Fix it.
Fixes: 00f4e4f9 xfs: add rmap btree stats infrastructure
Fixes: aafc3c24 xfs: support the XFS_BTNUM_FINOBT free inode btree type
Fixes: 46eeb521 xfs: introduce refcount btree definitions
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
|
|
Wrap the bit_spin_lock calls into a separate inline and add the RT
replacements with a real spinlock.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
When inodes are freed in xfs_ifree(), di_flags is cleared (so extent size
hints are removed) but the actual extent size fields are left intact.
This causes the extent hint validators to fail on freed inodes which once
had extent size hints.
This can be observed (for example) by running xfs/229 twice on a
non-crc xfs filesystem, or presumably on V5 with ikeep.
Fixes: 7d71a67 ("xfs: verify extent size hint is valid in inode verifier")
Fixes: 02a0fda ("xfs: verify COW extent size hint is valid in inode verifier")
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Make sure we initialize *bno and *len, before jumping to out_bad_rec
label, and risk calling xfs_warn() with uninitialized variables.
Coverity: 100898
Coverity: 1437081
Coverity: 1437129
Coverity: 1437191
Coverity: 1437201
Coverity: 1437212
Coverity: 1437341
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
In __xfs_ag_resv_init we incorrectly calculate the amount by which to
decrease fdblocks when reserving blocks for the rmapbt. Because rmapbt
allocations do not decrease fdblocks, we must decrease fdblocks by the
entire size of the requested reservation in order to achieve our goal of
always having enough free blocks to satisfy an rmapbt expansion.
This is in contrast to the refcountbt/finobt, which /do/ subtract from
fdblocks whenever they allocate a block. For this allocation type we
preserve the existing behavior where we decrease fdblocks only by the
requested reservation minus the size of the existing tree.
This fixes the problem where the available block counts reported by
statfs change across a remount if there had been an rmapbt size change
since mount time.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
|
|
If a user asks us to zero_range part of a file, the end of the range is
EOF, and not aligned to a page boundary, invoke writeback of the EOF
page to ensure that the post-EOF part of the page is zeroed. This
ensures that we don't expose stale memory contents via mmap, if in a
clumsy manner.
Found by running generic/127 when it runs zero_range and mapread at EOF
one after the other.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
|
|
In commit 8ad560d2565e6 ("xfs: strengthen rtalloc query range checks")
we strengthened the input parameter checks in the rtbitmap range query
function, but introduced an off-by-one error in the process. The call
to xfs_rtfind_forw deals with the high key being rextents, but we clamp
the high key to rextents - 1. This causes the returned results to stop
one block short of the end of the rtdev, which is incorrect.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Initialize the extent count field of the high key so that when we use
the high key to synthesize an 'unknown owner' record (i.e. used space
record) at the end of the queried range we have a field with which to
compute rm_blockcount. This is not strictly necessary because the
synthesizer never uses the rm_blockcount field, but we can shut up the
static code analysis anyway.
Coverity-id: 1437358
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The reflink iflag could have changed since the earlier unlocked check,
so if we got ILOCK_SHARED for a write and but we're now a reflink inode
we have to switch to ILOCK_EXCL and relock.
This helps us avoid blowing lock assertions in things like generic/166:
XFS: Assertion failed: xfs_isilocked(ip, XFS_ILOCK_EXCL), file: fs/xfs/xfs_reflink.c, line: 383
WARNING: CPU: 1 PID: 24707 at fs/xfs/xfs_message.c:104 assfail+0x25/0x30 [xfs]
Modules linked in: deadline_iosched dm_snapshot dm_bufio ext4 mbcache jbd2 dm_flakey xfs libcrc32c dax_pmem device_dax nd_pmem sch_fq_codel af_packet [last unloaded: scsi_debug]
CPU: 1 PID: 24707 Comm: xfs_io Not tainted 4.18.0-rc1-djw #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014
RIP: 0010:assfail+0x25/0x30 [xfs]
Code: ff 0f 0b c3 90 66 66 66 66 90 48 89 f1 41 89 d0 48 c7 c6 e8 ef 1b a0 48 89 fa 31 ff e8 54 f9 ff ff 80 3d fd ba 0f 00 00 75 03 <0f> 0b c3 0f 0b 66 0f 1f 44 00 00 66 66 66 66 90 48 63 f6 49 89 f9
RSP: 0018:ffffc90006423ad8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff880030b65e80 RCX: 0000000000000000
RDX: 00000000ffffffc0 RSI: 000000000000000a RDI: ffffffffa01b0447
RBP: ffffc90006423c10 R08: 0000000000000000 R09: 0000000000000000
R10: ffff88003d43fc30 R11: f000000000000000 R12: ffff880077cda000
R13: 0000000000000000 R14: ffffc90006423c30 R15: ffffc90006423bf9
FS: 00007feba8986800(0000) GS:ffff88003ec00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000138ab58 CR3: 000000003d40a000 CR4: 00000000000006a0
Call Trace:
xfs_reflink_allocate_cow+0x24c/0x3d0 [xfs]
xfs_file_iomap_begin+0x6d2/0xeb0 [xfs]
? iomap_to_fiemap+0x80/0x80
iomap_apply+0x5e/0x130
iomap_dio_rw+0x2e0/0x400
? iomap_to_fiemap+0x80/0x80
? xfs_file_dio_aio_write+0x133/0x4a0 [xfs]
xfs_file_dio_aio_write+0x133/0x4a0 [xfs]
xfs_file_write_iter+0x7b/0xb0 [xfs]
__vfs_write+0x16f/0x1f0
vfs_write+0xc8/0x1c0
ksys_pwrite64+0x74/0x90
do_syscall_64+0x56/0x180
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
Zorro Lang reports that generic/485 blows an assert on a filesystem with
512 byte blocks. The test tries to fallocate a post-eof extent at the
maximum file size and calls insert range to shift the extents right by
two blocks. On a 512b block filesystem this causes startoff to overflow
the 54-bit startoff field, leading to the assert.
Therefore, always check the rightmost extent to see if it would overflow
prior to invoking the insert range machinery.
Reported-by: zlang@redhat.com
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=200137
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
If we somehow end up with a filesystem that has fewer free blocks than
the blocks set aside to avoid ENOSPC deadlocks, it's possible that the
free space calculation in xfs_reserve_blocks will spit out a negative
number (because percpu_counter_sum returns s64). We fail to notice
this negative number and set fdblks_delta to it. Now we increment
fdblocks(!) and the unsigned type of m_resblks means that we end up
setting a ridiculously huge m_resblks reservation.
Avoid this comedy of errors by detecting the negative free space and
returning -ENOSPC.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
In commit e89c041338ed6ef ("xfs: implement the GETFSMAP ioctl") we
created the ability to obtain empty transactions. These transactions
have no log or block reservations and therefore can't modify anything.
Since they're also NO_WRITECOUNT they can run while the fs is frozen,
so we don't need to WARN_ON about that usage.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
When a corrupt inode is detected during xfs_iflush_cluster, we can
get a shutdown ASSERT failure like this:
XFS (pmem1): Metadata corruption detected at xfs_symlink_shortform_verify+0x5c/0xa0, inode 0x86627 data fork
XFS (pmem1): Unmount and run xfs_repair
XFS (pmem1): xfs_do_force_shutdown(0x8) called from line 3372 of file fs/xfs/xfs_inode.c. Return address = ffffffff814f4116
XFS (pmem1): Corruption of in-memory data detected. Shutting down filesystem
XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8a88
XFS (pmem1): xfs_do_force_shutdown(0x1) called from line 222 of file fs/xfs/libxfs/xfs_defer.c. Return address = ffffffff814a8ef9
XFS (pmem1): Please umount the filesystem and rectify the problem(s)
XFS: Assertion failed: xfs_isiflocked(ip), file: fs/xfs/xfs_inode.h, line: 258
.....
Call Trace:
xfs_iflush_abort+0x10a/0x110
xfs_iflush+0xf3/0x390
xfs_inode_item_push+0x126/0x1e0
xfsaild+0x2c5/0x890
kthread+0x11c/0x140
ret_from_fork+0x24/0x30
Essentially, xfs_iflush_abort() has been called twice on the
original inode that that was flushed. This happens because the
inode has been flushed to teh buffer successfully via
xfs_iflush_int(), and so when another inode is detected as corrupt
in xfs_iflush_cluster, the buffer is marked stale and EIO, and
iodone callbacks are run on it.
Running the iodone callbacks walks across the original inode and
calls xfs_iflush_abort() on it. When xfs_iflush_cluster() returns
to xfs_iflush(), it runs the error path for that function, and that
calls xfs_iflush_abort() on the inode a second time, leading to the
above assert failure as the inode is not flush locked anymore.
This bug has been there a long time.
The simple fix would be to just avoid calling xfs_iflush_abort() in
xfs_iflush() if we've got a failure from xfs_iflush_cluster().
However, xfs_iflush_cluster() has magic delwri buffer handling that
means it may or may not have run IO completion on the buffer, and
hence sometimes we have to call xfs_iflush_abort() from
xfs_iflush(), and sometimes we shouldn't.
After reading through all the error paths and the delwri buffer
code, it's clear that the error handling in xfs_iflush_cluster() is
unnecessary. If the buffer is delwri, it leaves it on the delwri
list so that when the delwri list is submitted it sees a shutdown
fliesystem in xfs_buf_submit() and that marks the buffer stale, EIO
and runs IO completion. i.e. exactly what xfs+iflush_cluster() does
when it's not a delwri buffer. Further, marking a buffer stale
clears the _XBF_DELWRI_Q flag on the buffer, which means when
submission of the buffer occurs, it just skips over it and releases
it.
IOWs, the error handling in xfs_iflush_cluster doesn't need to care
if the buffer is already on a the delwri queue or not - it just
needs to mark the buffer stale, EIO and run completions. That means
we can just use the easy fix for xfs_iflush() to avoid the double
abort.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When the inode is in extent format, it can't have more extents that
fit in the inode fork. We don't currenty check this, and so this
corruption goes unnoticed by the inode verifiers. This can lead to
crashes operating on invalid in-memory structures.
Attempts to access such a inode will now error out in the verifier
rather than allowing modification operations to proceed.
Reported-by: Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix a typedef, add some braces and breaks to shut up compiler warnings]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Instead of using xfs_bmapi_read to find delalloc extents and then punch
them out using xfs_bunmapi, opencode the loop to iterate over the extents
and call xfs_bmap_del_extent_delay directly. This both simplifies the
code and reduces the number of extent tree lookups required.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground
Pull inode timestamps conversion to timespec64 from Arnd Bergmann:
"This is a late set of changes from Deepa Dinamani doing an automated
treewide conversion of the inode and iattr structures from 'timespec'
to 'timespec64', to push the conversion from the VFS layer into the
individual file systems.
As Deepa writes:
'The series aims to switch vfs timestamps to use struct timespec64.
Currently vfs uses struct timespec, which is not y2038 safe.
The series involves the following:
1. Add vfs helper functions for supporting struct timepec64
timestamps.
2. Cast prints of vfs timestamps to avoid warnings after the switch.
3. Simplify code using vfs timestamps so that the actual replacement
becomes easy.
4. Convert vfs timestamps to use struct timespec64 using a script.
This is a flag day patch.
Next steps:
1. Convert APIs that can handle timespec64, instead of converting
timestamps at the boundaries.
2. Update internal data structures to avoid timestamp conversions'
Thomas Gleixner adds:
'I think there is no point to drag that out for the next merge
window. The whole thing needs to be done in one go for the core
changes which means that you're going to play that catchup game
forever. Let's get over with it towards the end of the merge window'"
* tag 'vfs-timespec64' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground:
pstore: Remove bogus format string definition
vfs: change inode times to use struct timespec64
pstore: Convert internal records to timespec64
udf: Simplify calls to udf_disk_stamp_to_time
fs: nfs: get rid of memcpys for inode times
ceph: make inode time prints to be long long
lustre: Use long long type to print inode time
fs: add timespec64_truncate()
|
|
Pull more xfs updates from Darrick Wong:
"Here's the second round of patches for XFS for 4.18. Most of the
commits are small cleanups, bug fixes, and continued strengthening of
metadata verifiers; the bulk of the diff is the conversion of the
fs/xfs/ tree to use SPDX tags.
This series has been run through a full xfstests run over the weekend
and through a quick xfstests run against this morning's master, with
no major failures reported.
Summary:
- Strengthen metadata checking to avoid ASSERTing on bad disk
contents
- Validate btree records that are being retrieved for clients
- Strengthen root inode verification
- Convert license blurbs to SPDX tags
- Enable changing DAX flag on directories
- Fix some writeback deadlocks in reflink
- Refactor out some old xfs helpers
- Move type verifiers to a separate file
- Fix some fuzzer crashes
- Various other bug fixes"
* tag 'xfs-4.18-merge-10' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (31 commits)
xfs: update incore per-AG inode count
xfs: replace do_mod with native operations
xfs: don't call xfs_da_shrink_inode with NULL bp
xfs: clean up MIN/MAX
xfs: move various type verifiers to common file
xfs: xfs_reflink_convert_cow() memory allocation deadlock
xfs: setup VFS i_rwsem lockdep state correctly
xfs: fix string handling in label get/set functions
xfs: convert to SPDX license tags
xfs: validate btree records on retrieval
xfs: push corruption -> ESTALE conversion to xfs_nfs_get_inode()
xfs: verify root inode more thoroughly
xfs: verify COW extent size hint is valid in inode verifier
xfs: verify extent size hint is valid in inode verifier
xfs: catch bad stripe alignment configurations
iomap: fsync swap files before iterating mappings
xfs: use xfs_trans_getsb in xfs_sync_sb_buf
xfs: don't assert on corrupted unlinked inode list
xfs: explicitly pass buffer size to xfs_corruption_error
xfs: don't assert when on-disk btree pointers are garbage
...
|
|
For whatever reason we never actually update pagi_count (the in-core
perag inode count) when we allocate or free inode chunks. Online scrub
is going to use it, so we need to fix the accounting.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"This adds a user for the new 'bytes-remaining' updates to
memcpy_mcsafe() that you already received through Ingo via the
x86-dax- for-linus pull.
Not included here, but still targeting this cycle, is support for
handling memory media errors (poison) consumed via userspace dax
mappings.
Summary:
- DAX broke a fundamental assumption of truncate of file mapped
pages. The truncate path assumed that it is safe to disconnect a
pinned page from a file and let the filesystem reclaim the physical
block. With DAX the page is equivalent to the filesystem block.
Introduce dax_layout_busy_page() to enable filesystems to wait for
pinned DAX pages to be released. Without this wait a filesystem
could allocate blocks under active device-DMA to a new file.
- DAX arranges for the block layer to be bypassed and uses
dax_direct_access() + copy_to_iter() to satisfy read(2) calls.
However, the memcpy_mcsafe() facility is available through the pmem
block driver. In order to safely handle media errors, via the DAX
block-layer bypass, introduce copy_to_iter_mcsafe().
- Fix cache management policy relative to the ACPI NFIT Platform
Capabilities Structure to properly elide cache flushes when they
are not necessary. The table indicates whether CPU caches are
power-fail protected. Clarify that a deep flush is always performed
on REQ_{FUA,PREFLUSH} requests"
* tag 'libnvdimm-for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (21 commits)
dax: Use dax_write_cache* helpers
libnvdimm, pmem: Do not flush power-fail protected CPU caches
libnvdimm, pmem: Unconditionally deep flush on *sync
libnvdimm, pmem: Complete REQ_FLUSH => REQ_PREFLUSH
acpi, nfit: Remove ecc_unit_size
dax: dax_insert_mapping_entry always succeeds
libnvdimm, e820: Register all pmem resources
libnvdimm: Debug probe times
linvdimm, pmem: Preserve read-only setting for pmem devices
x86, nfit_test: Add unit test for memcpy_mcsafe()
pmem: Switch to copy_to_iter_mcsafe()
dax: Report bytes remaining in dax_iomap_actor()
dax: Introduce a ->copy_to_iter dax operation
uio, lib: Fix CONFIG_ARCH_HAS_UACCESS_MCSAFE compilation
xfs, dax: introduce xfs_break_dax_layouts()
xfs: prepare xfs_break_layouts() for another layout type
xfs: prepare xfs_break_layouts() to be called with XFS_MMAPLOCK_EXCL
mm, fs, dax: handle layout changes to pinned dax mappings
mm: fix __gup_device_huge vs unmap
mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS
...
|
|
|
|
do_mod() is a hold-over from when we have different sizes for file
offsets and and other internal values for 40 bit XFS filesystems.
Hence depending on build flags variables passed to do_mod() could
change size. We no longer support those small format filesystems and
hence everything is of fixed size theses days, even on 32 bit
platforms.
As such, we can convert all the do_mod() callers to platform
optimised modulus operations as defined by linux/math64.h.
Individual conversions depend on the types of variables being used.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
xfs_attr3_leaf_create may have errored out before instantiating a buffer,
for example if the blkno is out of range. In that case there is no work
to do to remove it, and in fact xfs_da_shrink_inode will lead to an oops
if we try.
This also seems to fix a flaw where the original error from
xfs_attr3_leaf_create gets overwritten in the cleanup case, and it
removes a pointless assignment to bp which isn't used after this.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199969
Reported-by: Xu, Wen <wen.xu@gatech.edu>
Tested-by: Xu, Wen <wen.xu@gatech.edu>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Get rid of the MIN/MAX macros and just use the native min/max macros
directly in the XFS code.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
New verification functions like xfs_verify_fsbno() and
xfs_verify_agino() are spread across multiple files and different
header files. They really don't fit cleanly into the places they've
been put, and have wider scope than the current header includes.
Move the type verifiers to a new file in libxfs (xfs-types.c) and
the prototypes to xfs_types.h where they will be visible to all the
code that uses the types.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
xfs_reflink_convert_cow() manipulates the incore extent list
in GFP_KERNEL context in the IO submission path whilst holding
locked pages under writeback. This is a memory reclaim deadlock
vector. This code is not in a transaction, so any memory allocations
it makes aren't protected via the memalloc_nofs_save() context that
transactions carry.
Hence we need to run this call under memalloc_nofs_save() context to
prevent potential memory allocations from being run as GFP_KERNEL
and deadlocking.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When lockdep is enabled, it changes the type of the inode i_rwsem
semaphore before unlocking a newly instantiated inode. THere is the
possibility that there is already a waiter on that inode lock by the
time we unlock the new inode, so having lockdep re-initialise the
lock is a vector for trouble.
Avoid this whole situation by setting up the i_rwsem lockdep class
at the same time we set up the XFS inode i_ilock classes and so the
VFS doesn't have to change the lock class itself when it is
potentially unsafe.
This change is necessary because the equivalent fixes to the VFS code
made in commit 1e2e547a93a0 ("do d_instantiate/unlock_new_inode
combinations safely") are not relevant to XFS as it has it's own
internal inode cache lookup and instantiation routines.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
[sandeen: fix subject, avoid copy-out of uninit data in getlabel]
gcc-8 reports two warnings for the newly added getlabel/setlabel code:
fs/xfs/xfs_ioctl.c: In function 'xfs_ioc_getlabel':
fs/xfs/xfs_ioctl.c:1822:38: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
strncpy(label, sbp->sb_fname, sizeof(sbp->sb_fname));
^
In function 'strncpy',
inlined from 'xfs_ioc_setlabel' at /git/arm-soc/fs/xfs/xfs_ioctl.c:1863:2,
inlined from 'xfs_file_ioctl' at /git/arm-soc/fs/xfs/xfs_ioctl.c:1918:10:
include/linux/string.h:254:9: error: '__builtin_strncpy' output may be truncated copying 12 bytes from a string of length 12 [-Werror=stringop-truncation]
return __builtin_strncpy(p, q, size);
In both cases, part of the problem is that one of the strncpy()
arguments is a fixed-length character array with zero-padding rather
than a zero-terminated string. In the first one case, we also get an
odd warning about sizeof-pointer-memaccess, which doesn't seem right
(the sizeof is for an array that happens to be the same as the second
strncpy argument).
To work around the bogus warning, I use a plain 'XFSLABEL_MAX' for
the strncpy() length when copying the label in getlabel. For setlabel(),
using memcpy() with the correct length that is already known avoids
the second warning and is slightly simpler.
In a related issue, it appears that we accidentally skip the trailing
\0 when copying a 12-character label back to user space in getlabel().
Using the correct sizeof() argument here copies the extra character.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=85602
Fixes: f7664b31975b ("xfs: implement online get/set fs label")
Cc: Eric Sandeen <sandeen@redhat.com>
Cc: Martin Sebor <msebor@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/
This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:
for f in `git grep -l "GNU General" fs/xfs/` ; do
echo $f
cat $f | awk -f hdr.awk > $f.new
mv -f $f.new $f
done
And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:
$ cat hdr.awk
BEGIN {
hdr = 1.0
tag = "GPL-2.0"
str = ""
}
/^ \* This program is free software/ {
hdr = 2.0;
next
}
/any later version./ {
tag = "GPL-2.0+"
next
}
/^ \*\// {
if (hdr > 0.0) {
print "// SPDX-License-Identifier: " tag
print str
print $0
str=""
hdr = 0.0
next
}
print $0
next
}
/^ \* / {
if (hdr > 1.0)
next
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
next
}
/^ \*/ {
if (hdr > 0.0)
next
print $0
next
}
// {
if (hdr > 0.0) {
if (str != "")
str = str "\n"
str = str $0
next
}
print $0
}
END { }
$
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
So we don't check the validity of records as we walk the btree. When
there are corrupt records in the free space btree (e.g. zero
startblock/length or beyond EOAG) we just blindly use it and things
go bad from there. That leads to assert failures on debug kernels
like this:
XFS: Assertion failed: fs_is_ok, file: fs/xfs/libxfs/xfs_alloc.c, line: 450
....
Call Trace:
xfs_alloc_fixup_trees+0x368/0x5c0
xfs_alloc_ag_vextent_near+0x79a/0xe20
xfs_alloc_ag_vextent+0x1d3/0x330
xfs_alloc_vextent+0x5e9/0x870
Or crashes like this:
XFS (loop0): xfs_buf_find: daddr 0x7fb28 out of range, EOFS 0x8000
.....
BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8
....
Call Trace:
xfs_bmap_add_extent_hole_real+0x67d/0x930
xfs_bmapi_write+0x934/0xc90
xfs_da_grow_inode_int+0x27e/0x2f0
xfs_dir2_grow_inode+0x55/0x130
xfs_dir2_sf_to_block+0x94/0x5d0
xfs_dir2_sf_addname+0xd0/0x590
xfs_dir_createname+0x168/0x1a0
xfs_rename+0x658/0x9b0
By checking that free space records pulled from the trees are
within the valid range, we catch many of these corruptions before
they can do damage.
This is a generic btree record checking deficiency. We need to
validate the records we fetch from all the different btrees before
we use them to catch corruptions like this.
This patch results in a corrupt record emitting an error message and
returning -EFSCORRUPTED, and the higher layers catch that and abort:
XFS (loop0): Size Freespace BTree record corruption in AG 0 detected!
XFS (loop0): start block 0x0 block count 0x0
XFS (loop0): Internal error xfs_trans_cancel at line 1012 of file fs/xfs/xfs_trans.c. Caller xfs_create+0x42a/0x670
.....
Call Trace:
dump_stack+0x85/0xcb
xfs_trans_cancel+0x19f/0x1c0
xfs_create+0x42a/0x670
xfs_generic_create+0x1f6/0x2c0
vfs_create+0xf9/0x180
do_mknodat+0x1f9/0x210
do_syscall_64+0x5a/0x180
entry_SYSCALL_64_after_hwframe+0x49/0xbe
.....
XFS (loop0): xfs_do_force_shutdown(0x8) called from line 1013 of file fs/xfs/xfs_trans.c. Return address = ffffffff81500868
XFS (loop0): Corruption of in-memory data detected. Shutting down filesystem
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
In xfs_imap_to_bp(), we convert a -EFSCORRUPTED error to -EINVAL if
we are doing an untrusted lookup. This is done because we need
failed filehandle lookups to report -ESTALE to the caller, and it
does this by converting -EINVAL and -ENOENT errors to -ESTALE.
The squashing of EFSCORRUPTED in imap_to_bp makes it impossible for
for xfs_iget(UNTRUSTED) callers to determine the difference between
"inode does not exist" and "corruption detected during lookup". We
realy need that distinction in places calling xfS_iget(UNTRUSTED),
so move the filehandle error case handling all the way out to
xfs_nfs_get_inode() where it is needed.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When looking up the root inode at mount time, we don't actually do
any verification to check that the inode is allocated and accounted
for correctly in the INOBT. Make the checks on the root inode more
robust by making it an untrusted lookup. This forces the inode
lookup to use the inode btree to verify the inode is allocated
and mapped correctly to disk. This will also have the effect of
catching a significant number of AGI/INOBT related corruptions in
AG 0 at mount time.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
There are rules for vald extent size hints. We enforce them when
applications set them, but fuzzers violate those rules and that
screws us over. Validate COW extent size hint rules in the inode
verifier to catch this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
There are rules for vald extent size hints. We enforce them when
applications set them, but fuzzers violate those rules and that
screws us over.
This results in alignment assertion failures when setting up
allocations such as this in direct IO:
XFS: Assertion failed: ap->length, file: fs/xfs/libxfs/xfs_bmap.c, line: 3432
....
Call Trace:
xfs_bmap_btalloc+0x415/0x910
xfs_bmapi_write+0x71c/0x12e0
xfs_iomap_write_direct+0x2a9/0x420
xfs_file_iomap_begin+0x4dc/0xa70
iomap_apply+0x43/0x100
iomap_file_buffered_write+0x62/0x90
xfs_file_buffered_aio_write+0xba/0x300
__vfs_write+0xd5/0x150
vfs_write+0xb6/0x180
ksys_write+0x45/0xa0
do_syscall_64+0x5a/0x180
entry_SYSCALL_64_after_hwframe+0x49/0xbe
And from xfs_db:
core.extsize = 10380288
Which is not an integer multiple of the block size, and so violates
Rule #7 for setting extent size hints. Validate extent size hint
rules in the inode verifier to catch this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
When stripe alignments are invalid, data alignment algorithms in the
allocator may not work correctly. Ensure we catch superblocks with
invalid stripe alignment setups at mount time. These data alignment
mismatches are now detected at mount time like this:
XFS (loop0): SB stripe unit sanity check failed
XFS (loop0): Metadata corruption detected at xfs_sb_read_verify+0xab/0x110, xfs_sb block 0xffffffffffffffff
XFS (loop0): Unmount and run xfs_repair
XFS (loop0): First 128 bytes of corrupted metadata buffer:
0000000091c2de02: 58 46 53 42 00 00 10 00 00 00 00 00 00 00 10 00 XFSB............
0000000023bff869: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000000cdd8c893: 17 32 37 15 ff ca 46 3d 9a 17 d3 33 04 b5 f1 a2 .27...F=...3....
000000009fd2844f: 00 00 00 00 00 00 00 04 00 00 00 00 00 00 06 d0 ................
0000000088e9b0bb: 00 00 00 00 00 00 06 d1 00 00 00 00 00 00 06 d2 ................
00000000ff233a20: 00 00 00 01 00 00 10 00 00 00 00 01 00 00 00 00 ................
000000009db0ac8b: 00 00 03 60 e1 34 02 00 08 00 00 02 00 00 00 00 ...`.4..........
00000000f7022460: 00 00 00 00 00 00 00 00 0c 09 0b 01 0c 00 00 19 ................
XFS (loop0): SB validate failed with error -117.
And the mount fails.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
struct timespec is not y2038 safe. Transition vfs to use
y2038 safe struct timespec64 instead.
The change was made with the help of the following cocinelle
script. This catches about 80% of the changes.
All the header file and logic changes are included in the
first 5 rules. The rest are trivial substitutions.
I avoid changing any of the function signatures or any other
filesystem specific data structures to keep the patch simple
for review.
The script can be a little shorter by combining different cases.
But, this version was sufficient for my usecase.
virtual patch
@ depends on patch @
identifier now;
@@
- struct timespec
+ struct timespec64
current_time ( ... )
{
- struct timespec now = current_kernel_time();
+ struct timespec64 now = current_kernel_time64();
...
- return timespec_trunc(
+ return timespec64_trunc(
... );
}
@ depends on patch @
identifier xtime;
@@
struct \( iattr \| inode \| kstat \) {
...
- struct timespec xtime;
+ struct timespec64 xtime;
...
}
@ depends on patch @
identifier t;
@@
struct inode_operations {
...
int (*update_time) (...,
- struct timespec t,
+ struct timespec64 t,
...);
...
}
@ depends on patch @
identifier t;
identifier fn_update_time =~ "update_time$";
@@
fn_update_time (...,
- struct timespec *t,
+ struct timespec64 *t,
...) { ... }
@ depends on patch @
identifier t;
@@
lease_get_mtime( ... ,
- struct timespec *t
+ struct timespec64 *t
) { ... }
@te depends on patch forall@
identifier ts;
local idexpression struct inode *inode_node;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn_update_time =~ "update_time$";
identifier fn;
expression e, E3;
local idexpression struct inode *node1;
local idexpression struct inode *node2;
local idexpression struct iattr *attr1;
local idexpression struct iattr *attr2;
local idexpression struct iattr attr;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
@@
(
(
- struct timespec ts;
+ struct timespec64 ts;
|
- struct timespec ts = current_time(inode_node);
+ struct timespec64 ts = current_time(inode_node);
)
<+... when != ts
(
- timespec_equal(&inode_node->i_xtime, &ts)
+ timespec64_equal(&inode_node->i_xtime, &ts)
|
- timespec_equal(&ts, &inode_node->i_xtime)
+ timespec64_equal(&ts, &inode_node->i_xtime)
|
- timespec_compare(&inode_node->i_xtime, &ts)
+ timespec64_compare(&inode_node->i_xtime, &ts)
|
- timespec_compare(&ts, &inode_node->i_xtime)
+ timespec64_compare(&ts, &inode_node->i_xtime)
|
ts = current_time(e)
|
fn_update_time(..., &ts,...)
|
inode_node->i_xtime = ts
|
node1->i_xtime = ts
|
ts = inode_node->i_xtime
|
<+... attr1->ia_xtime ...+> = ts
|
ts = attr1->ia_xtime
|
ts.tv_sec
|
ts.tv_nsec
|
btrfs_set_stack_timespec_sec(..., ts.tv_sec)
|
btrfs_set_stack_timespec_nsec(..., ts.tv_nsec)
|
- ts = timespec64_to_timespec(
+ ts =
...
-)
|
- ts = ktime_to_timespec(
+ ts = ktime_to_timespec64(
...)
|
- ts = E3
+ ts = timespec_to_timespec64(E3)
|
- ktime_get_real_ts(&ts)
+ ktime_get_real_ts64(&ts)
|
fn(...,
- ts
+ timespec64_to_timespec(ts)
,...)
)
...+>
(
<... when != ts
- return ts;
+ return timespec64_to_timespec(ts);
...>
)
|
- timespec_equal(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_equal(&node1->i_xtime2, &node2->i_xtime2)
|
- timespec_equal(&node1->i_xtime1, &attr2->ia_xtime2)
+ timespec64_equal(&node1->i_xtime2, &attr2->ia_xtime2)
|
- timespec_compare(&node1->i_xtime1, &node2->i_xtime2)
+ timespec64_compare(&node1->i_xtime1, &node2->i_xtime2)
|
node1->i_xtime1 =
- timespec_trunc(attr1->ia_xtime1,
+ timespec64_trunc(attr1->ia_xtime1,
...)
|
- attr1->ia_xtime1 = timespec_trunc(attr2->ia_xtime2,
+ attr1->ia_xtime1 = timespec64_trunc(attr2->ia_xtime2,
...)
|
- ktime_get_real_ts(&attr1->ia_xtime1)
+ ktime_get_real_ts64(&attr1->ia_xtime1)
|
- ktime_get_real_ts(&attr.ia_xtime1)
+ ktime_get_real_ts64(&attr.ia_xtime1)
)
@ depends on patch @
struct inode *node;
struct iattr *attr;
identifier fn;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
expression e;
@@
(
- fn(node->i_xtime);
+ fn(timespec64_to_timespec(node->i_xtime));
|
fn(...,
- node->i_xtime);
+ timespec64_to_timespec(node->i_xtime));
|
- e = fn(attr->ia_xtime);
+ e = fn(timespec64_to_timespec(attr->ia_xtime));
)
@ depends on patch forall @
struct inode *node;
struct iattr *attr;
identifier i_xtime =~ "^i_[acm]time$";
identifier ia_xtime =~ "^ia_[acm]time$";
identifier fn;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
fn (...,
- &attr->ia_xtime,
+ &ts,
...);
)
...+>
}
@ depends on patch forall @
struct inode *node;
struct iattr *attr;
struct kstat *stat;
identifier ia_xtime =~ "^ia_[acm]time$";
identifier i_xtime =~ "^i_[acm]time$";
identifier xtime =~ "^[acm]time$";
identifier fn, ret;
@@
{
+ struct timespec ts;
<+...
(
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(node->i_xtime);
ret = fn (...,
- &node->i_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime,
+ &ts,
...);
|
+ ts = timespec64_to_timespec(attr->ia_xtime);
ret = fn (...,
- &attr->ia_xtime);
+ &ts);
|
+ ts = timespec64_to_timespec(stat->xtime);
ret = fn (...,
- &stat->xtime);
+ &ts);
)
...+>
}
@ depends on patch @
struct inode *node;
struct inode *node2;
identifier i_xtime1 =~ "^i_[acm]time$";
identifier i_xtime2 =~ "^i_[acm]time$";
identifier i_xtime3 =~ "^i_[acm]time$";
struct iattr *attrp;
struct iattr *attrp2;
struct iattr attr ;
identifier ia_xtime1 =~ "^ia_[acm]time$";
identifier ia_xtime2 =~ "^ia_[acm]time$";
struct kstat *stat;
struct kstat stat1;
struct timespec64 ts;
identifier xtime =~ "^[acmb]time$";
expression e;
@@
(
( node->i_xtime2 \| attrp->ia_xtime2 \| attr.ia_xtime2 \) = node->i_xtime1 ;
|
node->i_xtime2 = \( node2->i_xtime1 \| timespec64_trunc(...) \);
|
node->i_xtime2 = node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
node->i_xtime1 = node->i_xtime3 = \(ts \| current_time(...) \);
|
stat->xtime = node2->i_xtime1;
|
stat1.xtime = node2->i_xtime1;
|
( node->i_xtime2 \| attrp->ia_xtime2 \) = attrp->ia_xtime1 ;
|
( attrp->ia_xtime1 \| attr.ia_xtime1 \) = attrp2->ia_xtime2;
|
- e = node->i_xtime1;
+ e = timespec64_to_timespec( node->i_xtime1 );
|
- e = attrp->ia_xtime1;
+ e = timespec64_to_timespec( attrp->ia_xtime1 );
|
node->i_xtime1 = current_time(...);
|
node->i_xtime2 = node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
node->i_xtime1 = node->i_xtime3 =
- e;
+ timespec_to_timespec64(e);
|
- node->i_xtime1 = e;
+ node->i_xtime1 = timespec_to_timespec64(e);
)
Signed-off-by: Deepa Dinamani <deepa.kernel@gmail.com>
Cc: <anton@tuxera.com>
Cc: <balbi@kernel.org>
Cc: <bfields@fieldses.org>
Cc: <darrick.wong@oracle.com>
Cc: <dhowells@redhat.com>
Cc: <dsterba@suse.com>
Cc: <dwmw2@infradead.org>
Cc: <hch@lst.de>
Cc: <hirofumi@mail.parknet.co.jp>
Cc: <hubcap@omnibond.com>
Cc: <jack@suse.com>
Cc: <jaegeuk@kernel.org>
Cc: <jaharkes@cs.cmu.edu>
Cc: <jslaby@suse.com>
Cc: <keescook@chromium.org>
Cc: <mark@fasheh.com>
Cc: <miklos@szeredi.hu>
Cc: <nico@linaro.org>
Cc: <reiserfs-devel@vger.kernel.org>
Cc: <richard@nod.at>
Cc: <sage@redhat.com>
Cc: <sfrench@samba.org>
Cc: <swhiteho@redhat.com>
Cc: <tj@kernel.org>
Cc: <trond.myklebust@primarydata.com>
Cc: <tytso@mit.edu>
Cc: <viro@zeniv.linux.org.uk>
|
|
Pull xfs updates from Darrick Wong:
"New features this cycle include the ability to relabel mounted
filesystems, support for fallocated swapfiles, and using FUA for pure
data O_DSYNC directio writes. With this cycle we begin to integrate
online filesystem repair and refactor the growfs code in preparation
for eventual subvolume support, though the road ahead for both
features is quite long.
There are also numerous refactorings of the iomap code to remove
unnecessary log overhead, to disentangle some of the quota code, and
to prepare for buffer head removal in a future upstream kernel.
Metadata validation continues to improve, both in the hot path
veifiers and the online filesystem check code. I anticipate sending a
second pull request in a few days with more metadata validation
improvements.
This series has been run through a full xfstests run over the weekend
and through a quick xfstests run against this morning's master, with
no major failures reported.
Summary:
- Strengthen inode number and structure validation when allocating
inodes.
- Reduce pointless buffer allocations during cache miss
- Use FUA for pure data O_DSYNC directio writes
- Various iomap refactorings
- Strengthen quota metadata verification to avoid unfixable broken
quota
- Make AGFL block freeing a deferred operation to avoid blowing out
transaction reservations when running complex operations
- Get rid of the log item descriptors to reduce log overhead
- Fix various reflink bugs where inodes were double-joined to
transactions
- Don't issue discards when trimming unwritten extents
- Refactor incore dquot initialization and retrieval interfaces
- Fix some locking problmes in the quota scrub code
- Strengthen btree structure checks in scrub code
- Rewrite swapfile activation to use iomap and support unwritten
extents
- Make scrub exit to userspace sooner when corruptions or
cross-referencing problems are found
- Make scrub invoke the data fork scrubber directly on metadata
inodes
- Don't do background reclamation of post-eof and cow blocks when the
fs is suspended
- Fix secondary superblock buffer lifespan hinting
- Refactor growfs to use table-dispatched functions instead of long
stringy functions
- Move growfs code to libxfs
- Implement online fs label getting and setting
- Introduce online filesystem repair (in a very limited capacity)
- Fix unit conversion problems in the realtime freemap iteration
functions
- Various refactorings and cleanups in preparation to remove buffer
heads in a future release
- Reimplement the old bmap call with iomap
- Remove direct buffer head accesses from seek hole/data
- Various bug fixes"
* tag 'xfs-4.18-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (121 commits)
fs: use ->is_partially_uptodate in page_cache_seek_hole_data
fs: remove the buffer_unwritten check in page_seek_hole_data
fs: move page_cache_seek_hole_data to iomap.c
xfs: use iomap_bmap
iomap: add an iomap-based bmap implementation
iomap: add a iomap_sector helper
iomap: use __bio_add_page in iomap_dio_zero
iomap: move IOMAP_F_BOUNDARY to gfs2
iomap: fix the comment describing IOMAP_NOWAIT
iomap: inline data should be an iomap type, not a flag
mm: split ->readpages calls to avoid non-contiguous pages lists
mm: return an unsigned int from __do_page_cache_readahead
mm: give the 'ret' variable a better name __do_page_cache_readahead
block: add a lower-level bio_add_page interface
xfs: fix error handling in xfs_refcount_insert()
xfs: fix xfs_rtalloc_rec units
xfs: strengthen rtalloc query range checks
xfs: xfs_rtbuf_get should check the bmapi_read results
xfs: xfs_rtword_t should be unsigned, not signed
dax: change bdev_dax_supported() to support boolean returns
...
|
|
Use xfs_trans_getsb rather than reaching right in for
mp->m_sb_bp; I think this is more correct, and it facilitates
building this libxfs code in userspace as well.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
|
|
Use the per-ag inode number verifiers to detect corrupt lists and error
out, instead of using ASSERTs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Explicitly pass the buffer length to xfs_corruption_error() instead of
assuming XFS_CORRUPTION_DUMP_LEN so that we avoid dumping off the end
of the buffer.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Don't ASSERT when we encounter bad on-disk btree pointers in the debug
check functions. Log the error to leave breadcrumbs and let the upper
layers deal with it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Instead of ASSERTing on null btree pointers in xfs_btree_ptr_to_daddr,
use the new block number verifiers to ensure that the btree pointer
doesn't point to any sensitive areas (AG headers, past-EOFS) and return
-EFSCORRUPTED if this is the case. Remove the ASSERT because on-disk
corruptions shouldn't trigger ASSERTs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Make xfs_btree_check_ptr a non-debug function and introduce a new _debug
version that only runs when #ifdef DEBUG. This will enable us to reuse
the checking logic with other parts of the btree code.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
|
Create a variant of xfs_dir2_data_freefind that is suitable for use in a
verifier. Because _freefind is called by the verifier, we simply
duplicate the _freefind function, convert the ASSERTs to return
__this_address, and modify the verifier to call our new function. Once
we've made it impossible for directory blocks with bad bestfree data to
make it into the filesystem we can remove the DEBUG code from the
regular _freefind function.
Underlying argument: corruption of on-disk metadata should return
-EFSCORRUPTED instead of blowing ASSERTs.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
|
Bruce Ashfield
Eric Sandeen
Darrick J. Wong
Dave Chinner
Brian Foster
Christophe JAILLET
Carlos Maiolino
Thomas Gleixner
Christoph Hellwig
Linus Torvalds
Dan Williams
Eric Sandeen
Arnd Bergmann
Deepa Dinamani