aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
AgeCommit message (Collapse)Author
2020-09-17net: stmmac: dwmac1000: provide multicast filter fallbackJonathan McDowell
commit 592d751c1e174df5ff219946908b005eb48934b3 upstream. If we don't have a hardware multicast filter available then instead of silently failing to listen for the requested ethernet broadcast addresses fall back to receiving all multicast packets, in a similar fashion to other drivers with no multicast filter. Cc: stable@vger.kernel.org Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-17net: ethernet: stmmac: Disable hardware multicast filterJonathan McDowell
commit df43dd526e6609769ae513a81443c7aa727c8ca3 upstream. The IPQ806x does not appear to have a functional multicast ethernet address filter. This was observed as a failure to correctly receive IPv6 packets on a LAN to the all stations address. Checking the vendor driver shows that it does not attempt to enable the multicast filter and instead falls back to receiving all multicast packets, internally setting ALLMULTI. Use the new fallback support in the dwmac1000 driver to correctly achieve the same with the mainline IPQ806x driver. Confirmed to fix IPv6 functionality on an RB3011 router. Cc: stable@vger.kernel.org Signed-off-by: Jonathan McDowell <noodles@earth.li> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-17media: vsp1: dl: Fix NULL pointer dereference on unbindEugeniu Rosca
commit c92d30e4b78dc331909f8c6056c2792aa14e2166 upstream. In commit f3b98e3c4d2e16 ("media: vsp1: Provide support for extended command pools"), the vsp pointer used for referencing the VSP1 device structure from a command pool during vsp1_dl_ext_cmd_pool_destroy() was not populated. Correctly assign the pointer to prevent the following null-pointer-dereference when removing the device: [*] h3ulcb-kf #> echo fea28000.vsp > /sys/bus/platform/devices/fea28000.vsp/driver/unbind Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp=00000007318be000 [0000000000000028] pgd=00000007333a1003, pud=00000007333a6003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP Modules linked in: CPU: 1 PID: 486 Comm: sh Not tainted 5.7.0-rc6-arm64-renesas-00118-ge644645abf47 #185 Hardware name: Renesas H3ULCB Kingfisher board based on r8a77951 (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : vsp1_dlm_destroy+0xe4/0x11c lr : vsp1_dlm_destroy+0xc8/0x11c sp : ffff800012963b60 x29: ffff800012963b60 x28: ffff0006f83fc440 x27: 0000000000000000 x26: ffff0006f5e13e80 x25: ffff0006f5e13ed0 x24: ffff0006f5e13ed0 x23: ffff0006f5e13ed0 x22: dead000000000122 x21: ffff0006f5e3a080 x20: ffff0006f5df2938 x19: ffff0006f5df2980 x18: 0000000000000003 x17: 0000000000000000 x16: 0000000000000016 x15: 0000000000000003 x14: 00000000000393c0 x13: ffff800011a5ec18 x12: ffff800011d8d000 x11: ffff0006f83fcc68 x10: ffff800011a53d70 x9 : ffff8000111f3000 x8 : 0000000000000000 x7 : 0000000000210d00 x6 : 0000000000000000 x5 : ffff800010872e60 x4 : 0000000000000004 x3 : 0000000078068000 x2 : ffff800012781000 x1 : 0000000000002c00 x0 : 0000000000000000 Call trace: vsp1_dlm_destroy+0xe4/0x11c vsp1_wpf_destroy+0x10/0x20 vsp1_entity_destroy+0x24/0x4c vsp1_destroy_entities+0x54/0x130 vsp1_remove+0x1c/0x40 platform_drv_remove+0x28/0x50 __device_release_driver+0x178/0x220 device_driver_detach+0x44/0xc0 unbind_store+0xe0/0x104 drv_attr_store+0x20/0x30 sysfs_kf_write+0x48/0x70 kernfs_fop_write+0x148/0x230 __vfs_write+0x18/0x40 vfs_write+0xdc/0x1c4 ksys_write+0x68/0xf0 __arm64_sys_write+0x18/0x20 el0_svc_common.constprop.0+0x70/0x170 do_el0_svc+0x20/0x80 el0_sync_handler+0x134/0x1b0 el0_sync+0x140/0x180 Code: b40000c2 f9403a60 d2800084 a9400663 (f9401400) ---[ end trace 3875369841fb288a ]--- Fixes: f3b98e3c4d2e16 ("media: vsp1: Provide support for extended command pools") Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-17pinctrl: ingenic: Enhance support for IRQ_TYPE_EDGE_BOTHPaul Cercueil
commit 1c95348ba327fe8621d3680890c2341523d3524a upstream. Ingenic SoCs don't natively support registering an interrupt for both rising and falling edges. This has to be emulated in software. Until now, this was emulated by switching back and forth between IRQ_TYPE_EDGE_RISING and IRQ_TYPE_EDGE_FALLING according to the level of the GPIO. While this worked most of the time, when used with GPIOs that need debouncing, some events would be lost. For instance, between the time a falling-edge interrupt happens and the interrupt handler configures the hardware for rising-edge, the level of the pin may have already risen, and the rising-edge event is lost. To address that issue, instead of switching back and forth between IRQ_TYPE_EDGE_RISING and IRQ_TYPE_EDGE_FALLING, we now switch back and forth between IRQ_TYPE_LEVEL_LOW and IRQ_TYPE_LEVEL_HIGH. Since we always switch in the interrupt handler, they actually permit to detect level changes. In the example above, if the pin level rises before switching the IRQ type from IRQ_TYPE_LEVEL_LOW to IRQ_TYPE_LEVEL_HIGH, a new interrupt will raise as soon as the handler exits, and the rising-edge event will be properly detected. Fixes: e72394e2ea19 ("pinctrl: ingenic: Merge GPIO functionality") Reported-by: João Henrique <johnnyonflame@hotmail.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: João Henrique <johnnyonflame@hotmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200622214548.265417-1-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-17iio: dac: ad5592r: fix unbalanced mutex unlocks in ad5592r_read_raw()Alexandru Ardelean
commit 65afb0932a81c1de719ceee0db0b276094b10ac8 upstream. There are 2 exit paths where the lock isn't held, but try to unlock the mutex when exiting. In these places we should just return from the function. A neater approach would be to cleanup the ad5592r_read_raw(), but that would make this patch more difficult to backport to stable versions. Fixes 56ca9db862bf3: ("iio: dac: Add support for the AD5592R/AD5593R ADCs/DACs") Reported-by: Charles Stanhope <charles.stanhope@gmail.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-17PCI: qcom: Add support for tx term offset for rev 2.1.0Ansuel Smith
commit de3c4bf648975ea0b1d344d811e9b0748907b47c upstream. Add tx term offset support to pcie qcom driver need in some revision of the ipq806x SoC. Ipq8064 needs tx term offset set to 7. Link: https://lore.kernel.org/r/20200615210608.21469-9-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-17PCI: qcom: Define some PARF params needed for ipq8064 SoCAnsuel Smith
commit 5149901e9e6deca487c01cc434a3ac4125c7b00b upstream. Set some specific value for Tx De-Emphasis, Tx Swing and Rx equalization needed on some ipq8064 based device (Netgear R7800 for example). Without this the system locks on kernel load. Link: https://lore.kernel.org/r/20200615210608.21469-8-ansuelsmth@gmail.com Fixes: 82a823833f4e ("PCI: qcom: Add Qualcomm PCIe controller driver") Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Rob Herring <robh@kernel.org> Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-17PCI: Add device even if driver attach failedRajat Jain
commit 2194bc7c39610be7cabe7456c5f63a570604f015 upstream. device_attach() returning failure indicates a driver error while trying to probe the device. In such a scenario, the PCI device should still be added in the system and be visible to the user. When device_attach() fails, merely warn about it and keep the PCI device in the system. This partially reverts ab1a187bba5c ("PCI: Check device_attach() return value always"). Link: https://lore.kernel.org/r/20200706233240.3245512-1-rajatja@google.com Signed-off-by: Rajat Jain <rajatja@google.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: stable@vger.kernel.org # v4.6+ Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-17PCI: Mark AMD Navi10 GPU rev 0x00 ATS as brokenKai-Heng Feng
commit 45beb31d3afb651bb5c41897e46bd4fa9980c51c upstream. We are seeing AMD Radeon Pro W5700 doesn't work when IOMMU is enabled: iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01a0] iommu ivhd0: AMD-Vi: Event logged [IOTLB_INV_TIMEOUT device=63:00.0 address=0x42b5b01c0] The error also makes graphics driver fail to probe the device. It appears to be the same issue as commit 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") addresses, and indeed the same ATS quirk can workaround the issue. See-also: 5e89cd303e3a ("PCI: Mark AMD Navi14 GPU rev 0xc5 ATS as broken") See-also: d28ca864c493 ("PCI: Mark AMD Stoney Radeon R7 GPU ATS as broken") See-also: 9b44b0b09dec ("PCI: Mark AMD Stoney GPU ATS as broken") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208725 Link: https://lore.kernel.org/r/20200728104554.28927-1-kai.heng.feng@canonical.com Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-17PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context()Rafael J. Wysocki
commit dae68d7fd4930315389117e9da35b763f12238f9 upstream. If context is not NULL in acpiphp_grab_context(), but the is_going_away flag is set for the device's parent, the reference counter of the context needs to be decremented before returning NULL or the context will never be freed, so make that happen. Fixes: edf5bf34d408 ("ACPI / dock: Use callback pointers from devices' ACPI hotplug contexts") Reported-by: Vasily Averin <vvs@virtuozzo.com> Cc: 3.15+ <stable@vger.kernel.org> # 3.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-07Merge branch 'v5.2/standard/base' into v5.2/standard/cn96xxBruce Ashfield
2020-09-07Merge tag 'v5.2.59' into v5.2/standard/baseBruce Ashfield
This is the 5.2.59 stable release
2020-09-04nvme: multipath: round-robin: fix single non-optimized path caseMartin Wilck
commit 93eb0381e13d249a18ed4aae203291ff977e7ffb upstream. If there's only one usable, non-optimized path, nvme_round_robin_path() returns NULL, which is wrong. Fix it by falling back to "old", like in the single optimized path case. Also, if the active path isn't changed, there's no need to re-assign the pointer. Fixes: 3f6e3246db0e ("nvme-multipath: fix logic for non-optimized paths") Signed-off-by: Martin Wilck <mwilck@suse.com> Signed-off-by: Martin George <marting@netapp.com> Reviewed-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04block: loop: set discard granularity and alignment for block device backed loopMing Lei
commit bcb21c8cc9947286211327d663ace69f07d37a76 upstream. In case of block device backend, if the backend supports write zeros, the loop device will set queue flag of QUEUE_FLAG_DISCARD. However, limits.discard_granularity isn't setup, and this way is wrong, see the following description in Documentation/ABI/testing/sysfs-block: A discard_granularity of 0 means that the device does not support discard functionality. Especially 9b15d109a6b2 ("block: improve discard bio alignment in __blkdev_issue_discard()") starts to take q->limits.discard_granularity for computing max discard sectors. And zero discard granularity may cause kernel oops, or fail discard request even though the loop queue claims discard support via QUEUE_FLAG_DISCARD. Fix the issue by setup discard granularity and alignment. Fixes: c52abf563049 ("loop: Better discard support for block devices") Signed-off-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Acked-by: Coly Li <colyli@suse.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Xiao Ni <xni@redhat.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Evan Green <evgreen@chromium.org> Cc: Gwendal Grignou <gwendal@chromium.org> Cc: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Cc: Christoph Hellwig <hch@lst.de> Cc: <stable@vger.kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04USB: quirks: Ignore duplicate endpoint on Sound Devices MixPre-DAlan Stern
commit 068834a2773b6a12805105cfadbb3d4229fc6e0a upstream. The Sound Devices MixPre-D audio card suffers from the same defect as the Sound Devices USBPre2: an endpoint shared between a normal audio interface and a vendor-specific interface, in violation of the USB spec. Since the USB core now treats duplicated endpoints as bugs and ignores them, the audio endpoint isn't available and the card can't be used for audio capture. Along the same lines as commit bdd1b147b802 ("USB: quirks: blacklist duplicate ep on Sound Devices USBPre2"), this patch adds a quirks entry saying to ignore ep5in for interface 1, leaving it available for use with standard audio interface 2. Reported-and-tested-by: Jean-Christophe Barnoud <jcbarnoud@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Fixes: 3e4f8e21c4f2 ("USB: core: fix check for duplicate endpoints") Link: https://lore.kernel.org/r/20200826194624.GA412633@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04USB: rename USB quirk to USB_QUIRK_ENDPOINT_IGNOREGreg Kroah-Hartman
commit 91c7eaa686c3b7ae2d5b2aed22a45a02c8baa30e upstream. The USB core has a quirk flag to ignore specific endpoints, so rename it to be more obvious what this quirk does. Cc: Johan Hovold <johan@kernel.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Richard Dodd <richard.o.dodd@gmail.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Jonathan Cox <jonathan@jdcox.net> Cc: Bastien Nocera <hadess@hadess.net> Cc: "Thiébaud Weksteen" <tweek@google.com> Cc: Nishad Kamdar <nishadkamdar@gmail.com> Link: https://lore.kernel.org/r/20200618094300.1887727-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04USB: Ignore UAS for JMicron JMS567 ATA/ATAPI BridgeCyril Roelandt
commit 9aa37788e7ebb3f489fb4b71ce07adadd444264a upstream. This device does not support UAS properly and a similar entry already exists in drivers/usb/storage/unusual_uas.h. Without this patch, storage_probe() defers the handling of this device to UAS, which cannot handle it either. Tested-by: Brice Goglin <brice.goglin@gmail.com> Fixes: bc3bdb12bbb3 ("usb-storage: Disable UAS on JMicron SATA enclosure") Acked-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@vger.kernel.org> Signed-off-by: Cyril Roelandt <tipecaml@gmail.com> Link: https://lore.kernel.org/r/20200825212231.46309-1-tipecaml@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04s390/dasd: fix inability to use DASD with DIAG driverStefan Haberland
commit 9f4aa52387c68049403b59939df5c0dd8e3872cc upstream. During initialization of the DASD DIAG driver a request is issued that has a bio structure that resides on the stack. With virtually mapped kernel stacks this bio address might be in virtual storage which is unsuitable for usage with the diag250 call. In this case the device can not be set online using the DIAG discipline and fails with -EOPNOTSUP. In the system journal the following error message is presented: dasd: X.X.XXXX Setting the DASD online with discipline DIAG failed with rc=-95 Fix by allocating the bio structure instead of having it on the stack. Fixes: ce3dc447493f ("s390: add support for virtually mapped kernel stacks") Signed-off-by: Stefan Haberland <sth@linux.ibm.com> Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: stable@vger.kernel.org #4.20 Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04xen/gntdev: Fix dmabuf import with non-zero sgt offsetOleksandr Andrushchenko
commit 5fa4e6f1c2d8c9a4e47e1931b42893172d388f2b upstream. It is possible that the scatter-gather table during dmabuf import has non-zero offset of the data, but user-space doesn't expect that. Fix this by failing the import, so user-space doesn't access wrong data. Fixes: bf8dc55b1358 ("xen/gntdev: Implement dma-buf import functionality") Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> Acked-by: Juergen Gross <jgross@suse.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200813062113.11030-2-andr2000@gmail.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04xen/balloon: make the balloon wait interruptibleRoger Pau Monne
commit 88a479ff6ef8af7f07e11593d58befc644244ff7 upstream. So it can be killed, or else processes can get hung indefinitely waiting for balloon pages. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200727091342.52325-3-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04xen/balloon: fix accounting in alloc_xenballooned_pages error pathRoger Pau Monne
commit 1951fa33ec259abdf3497bfee7b63e7ddbb1a394 upstream. target_unpopulated is incremented with nr_pages at the start of the function, but the call to free_xenballooned_pages will only subtract pgno number of pages, and thus the rest need to be subtracted before returning or else accounting will be skewed. Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Juergen Gross <jgross@suse.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200727091342.52325-2-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04crypto: cpt - don't sleep of CRYPTO_TFM_REQ_MAY_SLEEP was not specifiedMikulas Patocka
commit 9e27c99104707f083dccd3b4d79762859b5a0614 upstream. There is this call chain: cvm_encrypt -> cvm_enc_dec -> cptvf_do_request -> process_request -> kzalloc where we call sleeping allocator function even if CRYPTO_TFM_REQ_MAY_SLEEP was not specified. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.11+ Fixes: c694b233295b ("crypto: cavium - Add the Virtual Function driver for CPT") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04crypto: ccp - Fix use of merged scatterlistsJohn Allen
commit 8a302808c60d441d9884cb00ea7f2b534f2e3ca5 upstream. Running the crypto manager self tests with CONFIG_CRYPTO_MANAGER_EXTRA_TESTS may result in several types of errors when using the ccp-crypto driver: alg: skcipher: cbc-des3-ccp encryption failed on test vector 0; expected_error=0, actual_error=-5 ... alg: skcipher: ctr-aes-ccp decryption overran dst buffer on test vector 0 ... alg: ahash: sha224-ccp test failed (wrong result) on test vector ... These errors are the result of improper processing of scatterlists mapped for DMA. Given a scatterlist in which entries are merged as part of mapping the scatterlist for DMA, the DMA length of a merged entry will reflect the combined length of the entries that were merged. The subsequent scatterlist entry will contain DMA information for the scatterlist entry after the last merged entry, but the non-DMA information will be that of the first merged entry. The ccp driver does not take this scatterlist merging into account. To address this, add a second scatterlist pointer to track the current position in the DMA mapped representation of the scatterlist. Both the DMA representation and the original representation of the scatterlist must be tracked as while most of the driver can use just the DMA representation, scatterlist_map_and_copy() must use the original representation and expects the scatterlist pointer to be accurate to the original representation. In order to properly walk the original scatterlist, the scatterlist must be walked until the combined lengths of the entries seen is equal to the DMA length of the current entry being processed in the DMA mapped representation. Fixes: 63b945091a070 ("crypto: ccp - CCP device driver and interface support") Signed-off-by: John Allen <john.allen@amd.com> Cc: stable@vger.kernel.org Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04crypto: qat - fix double free in qat_uclo_create_batch_init_listTom Rix
commit c06c76602e03bde24ee69a2022a829127e504202 upstream. clang static analysis flags this error qat_uclo.c:297:3: warning: Attempt to free released memory [unix.Malloc] kfree(*init_tab_base); ^~~~~~~~~~~~~~~~~~~~~ When input *init_tab_base is null, the function allocates memory for the head of the list. When there is problem allocating other list elements the list is unwound and freed. Then a check is made if the list head was allocated and is also freed. Keeping track of the what may need to be freed is the variable 'tail_old'. The unwinding/freeing block is while (tail_old) { mem_init = tail_old->next; kfree(tail_old); tail_old = mem_init; } The problem is that the first element of tail_old is also what was allocated for the list head init_header = kzalloc(sizeof(*init_header), GFP_KERNEL); ... *init_tab_base = init_header; flag = 1; } tail_old = init_header; So *init_tab_base/init_header are freed twice. There is another problem. When the input *init_tab_base is non null the tail_old is calculated by traveling down the list to first non null entry. tail_old = init_header; while (tail_old->next) tail_old = tail_old->next; When the unwinding free happens, the last entry of the input list will be freed. So the freeing needs a general changed. If locally allocated the first element of tail_old is freed, else it is skipped. As a bit of cleanup, reset *init_tab_base if it came in as null. Fixes: b4b7e67c917f ("crypto: qat - Intel(R) QAT ucode part of fw loader") Cc: <stable@vger.kernel.org> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04crypto: hisilicon - don't sleep of CRYPTO_TFM_REQ_MAY_SLEEP was not specifiedMikulas Patocka
commit 5ead051780404b5cb22147170acadd1994dc3236 upstream. There is this call chain: sec_alg_skcipher_encrypt -> sec_alg_skcipher_crypto -> sec_alg_alloc_and_calc_split_sizes -> kcalloc where we call sleeping allocator function even if CRYPTO_TFM_REQ_MAY_SLEEP was not specified. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org # v4.19+ Fixes: 915e4e8413da ("crypto: hisilicon - SEC security accelerator driver") Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04tpm: Unify the mismatching TPM space buffer sizesJarkko Sakkinen
commit 6c4e79d99e6f42b79040f1a33cd4018f5425030b upstream. The size of the buffers for storing context's and sessions can vary from arch to arch as PAGE_SIZE can be anything between 4 kB and 256 kB (the maximum for PPC64). Define a fixed buffer size set to 16 kB. This should be enough for most use with three handles (that is how many we allow at the moment). Parametrize the buffer size while doing this, so that it is easier to revisit this later on if required. Cc: stable@vger.kernel.org Reported-by: Stefan Berger <stefanb@linux.ibm.com> Fixes: 745b361e989a ("tpm: infrastructure for TPM spaces") Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04parisc: mask out enable and reserved bits from sba imaskSven Schnelle
commit 5b24993c21cbf2de11aff077a48c5cb0505a0450 upstream. When using kexec the SBA IOMMU IBASE might still have the RE bit set. This triggers a WARN_ON when trying to write back the IBASE register later, and it also makes some mask calculations fail. Cc: <stable@vger.kernel.org> Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04mtd: rawnand: qcom: avoid write to unavailable registerSivaprakash Murugesan
commit 443440cc4a901af462239d286cd10721aa1c7dfc upstream. SFLASHC_BURST_CFG is only available on older ipq NAND platforms, this register has been removed when the NAND controller got implemented in the qpic controller. Avoid writing this register on devices which are based on qpic NAND controller. Fixes: dce84760b09f ("mtd: nand: qcom: Support for IPQ8074 QPIC NAND controller") Cc: stable@vger.kernel.org Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/1591948696-16015-2-git-send-email-sivaprak@codeaurora.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04spi: spidev: Align buffers for DMAChristian Eggers
commit aa9e862d7d5bcecd4dca9f39e8b684b93dd84ee7 upstream. Simply copying all xfers from userspace into one bounce buffer causes alignment problems if the SPI controller uses DMA. Ensure that all transfer data blocks within the rx and tx bounce buffers are aligned for DMA (according to ARCH_KMALLOC_MINALIGN). Alignment may increase the usage of the bounce buffers. In some cases, the buffers may need to be increased using the "bufsiz" module parameter. Signed-off-by: Christian Eggers <ceggers@arri.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200728100832.24788-1-ceggers@arri.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04cpufreq: dt: fix oops on armada37xxIvan Kokshaysky
commit 10470dec3decaf5ed3c596f85debd7c42777ae12 upstream. Commit 0c868627e617e43a295d8 (cpufreq: dt: Allow platform specific intermediate callbacks) added two function pointers to the struct cpufreq_dt_platform_data. However, armada37xx_cpufreq_driver_init() has this struct (pdata) located on the stack and uses only "suspend" and "resume" fields. So these newly added "get_intermediate" and "target_intermediate" pointers are uninitialized and contain arbitrary non-null values, causing all kinds of trouble. For instance, here is an oops on espressobin after an attempt to change the cpefreq governor: [ 29.174554] Unable to handle kernel execute from non-executable memory at virtual address ffff00003f87bdc0 ... [ 29.269373] pc : 0xffff00003f87bdc0 [ 29.272957] lr : __cpufreq_driver_target+0x138/0x580 ... Fixed by zeroing out pdata before use. Cc: <stable@vger.kernel.org> # v5.7+ Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04drm/ttm/nouveau: don't call tt destroy callback on alloc failure.Dave Airlie
commit 5de5b6ecf97a021f29403aa272cb4e03318ef586 upstream. This is confusing, and from my reading of all the drivers only nouveau got this right. Just make the API act under driver control of it's own allocation failing, and don't call destroy, if the page table fails to create there is nothing to cleanup here. (I'm willing to believe I've missed something here, so please review deeply). Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200728041736.20689-1-airlied@gmail.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04media: media-request: Fix crash if memory allocation failsTuomas Tynkkynen
commit e30cc79cc80fd919b697a15c5000d9f57487de8e upstream. Syzbot reports a NULL-ptr deref in the kref_put() call: BUG: KASAN: null-ptr-deref in media_request_put drivers/media/mc/mc-request.c:81 [inline] kref_put include/linux/kref.h:64 [inline] media_request_put drivers/media/mc/mc-request.c:81 [inline] media_request_close+0x4d/0x170 drivers/media/mc/mc-request.c:89 __fput+0x2ed/0x750 fs/file_table.c:281 task_work_run+0x147/0x1d0 kernel/task_work.c:123 tracehook_notify_resume include/linux/tracehook.h:188 [inline] exit_to_usermode_loop arch/x86/entry/common.c:165 [inline] prepare_exit_to_usermode+0x48e/0x600 arch/x86/entry/common.c:196 What led to this crash was an injected memory allocation failure in media_request_alloc(): FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 should_failslab+0x5/0x20 kmem_cache_alloc_trace+0x57/0x300 ? anon_inode_getfile+0xe5/0x170 media_request_alloc+0x339/0x440 media_device_request_alloc+0x94/0xc0 media_device_ioctl+0x1fb/0x330 ? do_vfs_ioctl+0x6ea/0x1a00 ? media_ioctl+0x101/0x120 ? __media_device_usb_init+0x430/0x430 ? media_poll+0x110/0x110 __se_sys_ioctl+0xf9/0x160 do_syscall_64+0xf3/0x1b0 When that allocation fails, filp->private_data is left uninitialized which media_request_close() does not expect and crashes. To avoid this, reorder media_request_alloc() such that allocating the struct file happens as the last step thus media_request_close() will no longer get called for a partially created media request. Reported-by: syzbot+6bed2d543cf7e48b822b@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Fixes: 10905d70d788 ("media: media-request: implement media requests") Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04USB: serial: cp210x: enable usb generic throttle/unthrottleBrant Merryman
commit 4387b3dbb079d482d3c2b43a703ceed4dd27ed28 upstream. Assign the .throttle and .unthrottle functions to be generic function in the driver structure to prevent data loss that can otherwise occur if the host does not enable USB throttling. Signed-off-by: Brant Merryman <brant.merryman@silabs.com> Co-developed-by: Phu Luu <phu.luu@silabs.com> Signed-off-by: Phu Luu <phu.luu@silabs.com> Link: https://lore.kernel.org/r/57401AF3-9961-461F-95E1-F8AFC2105F5E@silabs.com [ johan: fix up tags ] Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control") Cc: stable <stable@vger.kernel.org> # 2.6.12 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04USB: serial: cp210x: re-enable auto-RTS on openBrant Merryman
commit c7614ff9b73a1e6fb2b1b51396da132ed22fecdb upstream. CP210x hardware disables auto-RTS but leaves auto-CTS when in hardware flow control mode and UART on cp210x hardware is disabled. When re-opening the port, if auto-CTS is enabled on the cp210x, then auto-RTS must be re-enabled in the driver. Signed-off-by: Brant Merryman <brant.merryman@silabs.com> Co-developed-by: Phu Luu <phu.luu@silabs.com> Signed-off-by: Phu Luu <phu.luu@silabs.com> Link: https://lore.kernel.org/r/ECCF8E73-91F3-4080-BE17-1714BC8818FB@silabs.com [ johan: fix up tags and problem description ] Fixes: 39a66b8d22a3 ("[PATCH] USB: CP2101 Add support for flow control") Cc: stable <stable@vger.kernel.org> # 2.6.12 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04net: phy: fix memory leak in device-create error pathJohan Hovold
commit d02cbc46136105cf86f84ac355e16f04696f538d upstream. A recent commit introduced a late error path in phy_device_create() which fails to release the device name allocated by dev_set_name(). Fixes: 13d0ab6750b2 ("net: phy: check return code when requesting PHY driver module") Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04drivers/net/wan/lapbether: Added needed_headroom and a skb->len checkXie He
commit c7ca03c216acb14466a713fedf1b9f2c24994ef2 upstream. 1. Added a skb->len check This driver expects upper layers to include a pseudo header of 1 byte when passing down a skb for transmission. This driver will read this 1-byte header. This patch added a skb->len check before reading the header to make sure the header exists. 2. Changed to use needed_headroom instead of hard_header_len to request necessary headroom to be allocated In net/packet/af_packet.c, the function packet_snd first reserves a headroom of length (dev->hard_header_len + dev->needed_headroom). Then if the socket is a SOCK_DGRAM socket, it calls dev_hard_header, which calls dev->header_ops->create, to create the link layer header. If the socket is a SOCK_RAW socket, it "un-reserves" a headroom of length (dev->hard_header_len), and assumes the user to provide the appropriate link layer header. So according to the logic of af_packet.c, dev->hard_header_len should be the length of the header that would be created by dev->header_ops->create. However, this driver doesn't provide dev->header_ops, so logically dev->hard_header_len should be 0. So we should use dev->needed_headroom instead of dev->hard_header_len to request necessary headroom to be allocated. This change fixes kernel panic when this driver is used with AF_PACKET SOCK_RAW sockets. Call stack when panic: [ 168.399197] skbuff: skb_under_panic: text:ffffffff819d95fb len:20 put:14 head:ffff8882704c0a00 data:ffff8882704c09fd tail:0x11 end:0xc0 dev:veth0 ... [ 168.399255] Call Trace: [ 168.399259] skb_push.cold+0x14/0x24 [ 168.399262] eth_header+0x2b/0xc0 [ 168.399267] lapbeth_data_transmit+0x9a/0xb0 [lapbether] [ 168.399275] lapb_data_transmit+0x22/0x2c [lapb] [ 168.399277] lapb_transmit_buffer+0x71/0xb0 [lapb] [ 168.399279] lapb_kick+0xe3/0x1c0 [lapb] [ 168.399281] lapb_data_request+0x76/0xc0 [lapb] [ 168.399283] lapbeth_xmit+0x56/0x90 [lapbether] [ 168.399286] dev_hard_start_xmit+0x91/0x1f0 [ 168.399289] ? irq_init_percpu_irqstack+0xc0/0x100 [ 168.399291] __dev_queue_xmit+0x721/0x8e0 [ 168.399295] ? packet_parse_headers.isra.0+0xd2/0x110 [ 168.399297] dev_queue_xmit+0x10/0x20 [ 168.399298] packet_sendmsg+0xbf0/0x19b0 ...... Cc: Willem de Bruijn <willemdebruijn.kernel@gmail.com> Cc: Martin Schiller <ms@dev.tdt.de> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Xie He <xie.he.0141@gmail.com> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04pinctrl-single: fix pcs_parse_pinconf() return valueDrew Fustini
commit f46fe79ff1b65692a65266a5bec6dbe2bf7fc70f upstream. This patch causes pcs_parse_pinconf() to return -ENOTSUPP when no pinctrl_map is added. The current behavior is to return 0 when !PCS_HAS_PINCONF or !nconfs. Thus pcs_parse_one_pinctrl_entry() incorrectly assumes that a map was added and sets num_maps = 2. Analysis: ========= The function pcs_parse_one_pinctrl_entry() calls pcs_parse_pinconf() if PCS_HAS_PINCONF is enabled. The function pcs_parse_pinconf() returns 0 to indicate there was no error and num_maps is then set to 2: 980 static int pcs_parse_one_pinctrl_entry(struct pcs_device *pcs, 981 struct device_node *np, 982 struct pinctrl_map **map, 983 unsigned *num_maps, 984 const char **pgnames) 985 { <snip> 1053 (*map)->type = PIN_MAP_TYPE_MUX_GROUP; 1054 (*map)->data.mux.group = np->name; 1055 (*map)->data.mux.function = np->name; 1056 1057 if (PCS_HAS_PINCONF && function) { 1058 res = pcs_parse_pinconf(pcs, np, function, map); 1059 if (res) 1060 goto free_pingroups; 1061 *num_maps = 2; 1062 } else { 1063 *num_maps = 1; 1064 } However, pcs_parse_pinconf() will also return 0 if !PCS_HAS_PINCONF or !nconfs. I believe these conditions should indicate that no map was added by returning -ENOTSUPP. Otherwise pcs_parse_one_pinctrl_entry() will set num_maps = 2 even though no maps were successfully added, as it does not reach "m++" on line 940: 895 static int pcs_parse_pinconf(struct pcs_device *pcs, struct device_node *np, 896 struct pcs_function *func, 897 struct pinctrl_map **map) 898 899 { 900 struct pinctrl_map *m = *map; <snip> 917 /* If pinconf isn't supported, don't parse properties in below. */ 918 if (!PCS_HAS_PINCONF) 919 return 0; 920 921 /* cacluate how much properties are supported in current node */ 922 for (i = 0; i < ARRAY_SIZE(prop2); i++) { 923 if (of_find_property(np, prop2[i].name, NULL)) 924 nconfs++; 925 } 926 for (i = 0; i < ARRAY_SIZE(prop4); i++) { 927 if (of_find_property(np, prop4[i].name, NULL)) 928 nconfs++; 929 } 930 if (!nconfs) 919 return 0; 932 933 func->conf = devm_kcalloc(pcs->dev, 934 nconfs, sizeof(struct pcs_conf_vals), 935 GFP_KERNEL); 936 if (!func->conf) 937 return -ENOMEM; 938 func->nconfs = nconfs; 939 conf = &(func->conf[0]); 940 m++; This situtation will cause a boot failure [0] on the BeagleBone Black (AM3358) when am33xx_pinmux node in arch/arm/boot/dts/am33xx-l4.dtsi has compatible = "pinconf-single" instead of "pinctrl-single". The patch fixes this issue by returning -ENOSUPP when !PCS_HAS_PINCONF or !nconfs, so that pcs_parse_one_pinctrl_entry() will know that no map was added. Logic is also added to pcs_parse_one_pinctrl_entry() to distinguish between -ENOSUPP and other errors. In the case of -ENOSUPP, num_maps is set to 1 as it is valid for pinconf to be enabled and a given pin group to not any pinconf properties. [0] https://lore.kernel.org/linux-omap/20200529175544.GA3766151@x1/ Fixes: 9dddb4df90d1 ("pinctrl: single: support generic pinconf") Signed-off-by: Drew Fustini <drew@beagleboard.org> Acked-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200608125143.GA2789203@x1 Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04net: thunderx: initialize VF's mailbox mutex before first usageDean Nelson
commit c1055b76ad00aed0e8b79417080f212d736246b6 upstream. A VF's mailbox mutex is not getting initialized by nicvf_probe() until after it is first used. And such usage is resulting in... [ 28.270927] ------------[ cut here ]------------ [ 28.270934] DEBUG_LOCKS_WARN_ON(lock->magic != lock) [ 28.270980] WARNING: CPU: 9 PID: 675 at kernel/locking/mutex.c:938 __mutex_lock+0xdac/0x12f0 [ 28.270985] Modules linked in: ast(+) nicvf(+) i2c_algo_bit drm_vram_helper drm_ttm_helper ttm nicpf(+) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ixgbe(+) sg thunder_bgx mdio i2c_thunderx mdio_thunder thunder_xcv mdio_cavium dm_mirror dm_region_hash dm_log dm_mod [ 28.271064] CPU: 9 PID: 675 Comm: systemd-udevd Not tainted 4.18.0+ #1 [ 28.271070] Hardware name: GIGABYTE R120-T34-00/MT30-GS2-00, BIOS F02 08/06/2019 [ 28.271078] pstate: 60000005 (nZCv daif -PAN -UAO) [ 28.271086] pc : __mutex_lock+0xdac/0x12f0 [ 28.271092] lr : __mutex_lock+0xdac/0x12f0 [ 28.271097] sp : ffff800d42146fb0 [ 28.271103] x29: ffff800d42146fb0 x28: 0000000000000000 [ 28.271113] x27: ffff800d24361180 x26: dfff200000000000 [ 28.271122] x25: 0000000000000000 x24: 0000000000000002 [ 28.271132] x23: ffff20001597cc80 x22: ffff2000139e9848 [ 28.271141] x21: 0000000000000000 x20: 1ffff001a8428e0c [ 28.271151] x19: ffff200015d5d000 x18: 1ffff001ae0f2184 [ 28.271160] x17: 0000000000000000 x16: 0000000000000000 [ 28.271170] x15: ffff800d70790c38 x14: ffff20001597c000 [ 28.271179] x13: ffff20001597cc80 x12: ffff040002b2f779 [ 28.271189] x11: 1fffe40002b2f778 x10: ffff040002b2f778 [ 28.271199] x9 : 0000000000000000 x8 : 00000000f1f1f1f1 [ 28.271208] x7 : 00000000f2f2f2f2 x6 : 0000000000000000 [ 28.271217] x5 : 1ffff001ae0f2186 x4 : 1fffe400027eb03c [ 28.271227] x3 : dfff200000000000 x2 : ffff1001a8428dbe [ 28.271237] x1 : c87fdfac7ea11d00 x0 : 0000000000000000 [ 28.271246] Call trace: [ 28.271254] __mutex_lock+0xdac/0x12f0 [ 28.271261] mutex_lock_nested+0x3c/0x50 [ 28.271297] nicvf_send_msg_to_pf+0x40/0x3a0 [nicvf] [ 28.271316] nicvf_register_misc_interrupt+0x20c/0x328 [nicvf] [ 28.271334] nicvf_probe+0x508/0xda0 [nicvf] [ 28.271344] local_pci_probe+0xc4/0x180 [ 28.271352] pci_device_probe+0x3ec/0x528 [ 28.271363] driver_probe_device+0x21c/0xb98 [ 28.271371] device_driver_attach+0xe8/0x120 [ 28.271379] __driver_attach+0xe0/0x2a0 [ 28.271386] bus_for_each_dev+0x118/0x190 [ 28.271394] driver_attach+0x48/0x60 [ 28.271401] bus_add_driver+0x328/0x558 [ 28.271409] driver_register+0x148/0x398 [ 28.271416] __pci_register_driver+0x14c/0x1b0 [ 28.271437] nicvf_init_module+0x54/0x10000 [nicvf] [ 28.271447] do_one_initcall+0x18c/0xc18 [ 28.271457] do_init_module+0x18c/0x618 [ 28.271464] load_module+0x2bc0/0x4088 [ 28.271472] __se_sys_finit_module+0x110/0x188 [ 28.271479] __arm64_sys_finit_module+0x70/0xa0 [ 28.271490] el0_svc_handler+0x15c/0x380 [ 28.271496] el0_svc+0x8/0xc [ 28.271502] irq event stamp: 52649 [ 28.271513] hardirqs last enabled at (52649): [<ffff200011b4d790>] _raw_spin_unlock_irqrestore+0xc0/0xd8 [ 28.271522] hardirqs last disabled at (52648): [<ffff200011b4d3c4>] _raw_spin_lock_irqsave+0x3c/0xf0 [ 28.271530] softirqs last enabled at (52330): [<ffff200010082af4>] __do_softirq+0xacc/0x117c [ 28.271540] softirqs last disabled at (52313): [<ffff20001019b354>] irq_exit+0x3cc/0x500 [ 28.271545] ---[ end trace a9b90324c8a0d4ee ]--- This problem is resolved by moving the call to mutex_init() up earlier in nicvf_probe(). Fixes: 609ea65c65a0 ("net: thunderx: add mutex to protect mailbox from concurrent calls for same VF") Signed-off-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04fsl/fman: fix eth hash table allocationFlorinel Iordache
commit 3207f715c34317d08e798e11a10ce816feb53c0f upstream. Fix memory allocation for ethernet address hash table. The code was wrongly allocating an array for eth hash table which is incorrect because this is the main structure for eth hash table (struct eth_hash_t) that contains inside a number of elements. Fixes: 57ba4c9b56d8 ("fsl/fman: Add FMan MAC support") Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04fsl/fman: check dereferencing null pointerFlorinel Iordache
commit cc5d229a122106733a85c279d89d7703f21e4d4f upstream. Add a safe check to avoid dereferencing null pointer Fixes: 57ba4c9b56d8 ("fsl/fman: Add FMan MAC support") Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04fsl/fman: fix unreachable codeFlorinel Iordache
commit cc79fd8f557767de90ff199d3b6fb911df43160a upstream. The parameter 'priority' is incorrectly forced to zero which ultimately induces logically dead code in the subsequent lines. Fixes: 57ba4c9b56d8 ("fsl/fman: Add FMan MAC support") Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04fsl/fman: fix dereference null return valueFlorinel Iordache
commit 0572054617f32670abab4b4e89a876954d54b704 upstream. Check before using returned value to avoid dereferencing null pointer. Fixes: 18a6c85fcc78 ("fsl/fman: Add FMan Port Support") Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04fsl/fman: use 32-bit unsigned integerFlorinel Iordache
commit 99f47abd9f7bf6e365820d355dc98f6955a562df upstream. Potentially overflowing expression (ts_freq << 16 and intgr << 16) declared as type u32 (32-bit unsigned) is evaluated using 32-bit arithmetic and then used in a context that expects an expression of type u64 (64-bit unsigned) which ultimately is used as 16-bit unsigned by typecasting to u16. Fixed by using an unsigned 32-bit integer since the value is truncated anyway in the end. Fixes: 414fd46e7762 ("fsl/fman: Add FMan support") Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04net: spider_net: Fix the size used in a 'dma_free_coherent()' callChristophe JAILLET
commit 36f28f7687a9ce665479cce5d64ce7afaa9e77ae upstream. Update the size used in 'dma_free_coherent()' in order to match the one used in the corresponding 'dma_alloc_coherent()', in 'spider_net_init_chain()'. Fixes: d4ed8f8d1fb7 ("Spidernet DMA coalescing") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04liquidio: Fix wrong return value in cn23xx_get_pf_num()Tianjia Zhang
commit aa027850a292ea65524b8fab83eb91a124ad362c upstream. On an error exit path, a negative error code should be returned instead of a positive return value. Fixes: 0c45d7fe12c7e ("liquidio: fix use of pf in pass-through mode in a virtual machine") Cc: Rick Farrington <ricardo.farrington@cavium.com> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04net: ethernet: aquantia: Fix wrong return valueTianjia Zhang
commit 0470a48880f8bc42ce26962b79c7b802c5a695ec upstream. In function hw_atl_a0_hw_multicast_list_set(), when an invalid request is encountered, a negative error code should be returned. Fixes: bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions") Cc: David VomLehn <vomlehn@texas.net> Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04net/mlx5: Delete extra dump stack that gives nothingLeon Romanovsky
commit 6c4e9bcfb48933d533ff975e152757991556294a upstream. The WARN_*() macros are intended to catch impossible situations from the SW point of view. They gave a little in case HW<->SW interface is out-of-sync. Such out-of-sync scenario can be due to SW errors that are not part of this flow or because some HW errors, where dump stack won't help either. This specific WARN_ON() is useless because mlx5_core code is prepared to handle such situations and will unfold everything correctly while providing enough information to the users to understand why FS is not working. WARNING: CPU: 0 PID: 3222 at drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:825 connect_fts_in_prio.isra.20+0x1dd/0x260 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:825 Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 3222 Comm: syz-executor861 Not tainted 5.5.0-rc6+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack linux/lib/dump_stack.c:77 [inline] dump_stack+0x94/0xce linux/lib/dump_stack.c:118 panic+0x234/0x56f linux/kernel/panic.c:221 __warn+0x1cc/0x1e1 linux/kernel/panic.c:582 report_bug+0x200/0x310 linux/lib/bug.c:195 fixup_bug.part.11+0x32/0x80 linux/arch/x86/kernel/traps.c:174 fixup_bug linux/arch/x86/kernel/traps.c:273 [inline] do_error_trap+0xd3/0x100 linux/arch/x86/kernel/traps.c:267 do_invalid_op+0x31/0x40 linux/arch/x86/kernel/traps.c:286 invalid_op+0x1e/0x30 linux/arch/x86/entry/entry_64.S:1027 RIP: 0010:connect_fts_in_prio.isra.20+0x1dd/0x260 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:825 Code: 00 00 48 c7 c2 60 8c 31 84 48 c7 c6 00 81 31 84 48 8b 38 e8 3c a8 cb ff 41 83 fd 01 8b 04 24 0f 8e 29 ff ff ff e8 83 7b bc fe <0f> 0b 8b 04 24 e9 1a ff ff ff 89 04 24 e8 c1 20 e0 fe 8b 04 24 eb RSP: 0018:ffffc90004bb7858 EFLAGS: 00010293 RAX: ffff88805de98e80 RBX: 0000000000000c96 RCX: ffffffff827a853d RDX: 0000000000000000 RSI: 0000000000000000 RDI: fffff52000976efa RBP: 0000000000000007 R08: ffffed100da060e3 R09: ffffed100da060e3 R10: 0000000000000001 R11: ffffed100da060e2 R12: dffffc0000000000 R13: 0000000000000002 R14: ffff8880683a1a10 R15: ffffed100d07bc1c connect_prev_fts linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:844 [inline] connect_flow_table linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:975 [inline] __mlx5_create_flow_table+0x8f8/0x1710 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:1064 mlx5_create_flow_table linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:1094 [inline] mlx5_create_auto_grouped_flow_table+0xe1/0x210 linux/drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:1136 _get_prio linux/drivers/infiniband/hw/mlx5/main.c:3286 [inline] get_flow_table+0x2ea/0x760 linux/drivers/infiniband/hw/mlx5/main.c:3376 mlx5_ib_create_flow+0x331/0x11c0 linux/drivers/infiniband/hw/mlx5/main.c:3896 ib_uverbs_ex_create_flow+0x13e8/0x1b40 linux/drivers/infiniband/core/uverbs_cmd.c:3311 ib_uverbs_write+0xaa5/0xdf0 linux/drivers/infiniband/core/uverbs_main.c:769 __vfs_write+0x7c/0x100 linux/fs/read_write.c:494 vfs_write+0x168/0x4a0 linux/fs/read_write.c:558 ksys_write+0xc8/0x200 linux/fs/read_write.c:611 do_syscall_64+0x9c/0x390 linux/arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45a059 Code: 00 00 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fcc17564c98 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fcc17564ca0 RCX: 000000000045a059 RDX: 0000000000000030 RSI: 00000000200003c0 RDI: 0000000000000005 RBP: 0000000000000007 R08: 0000000000000002 R09: 0000000000003131 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006e636c R13: 0000000000000000 R14: 00000000006e6360 R15: 00007ffdcbdaf6a0 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 1 seconds.. Fixes: f90edfd279f3 ("net/mlx5_core: Connect flow tables") Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04wl1251: fix always return 0 errorWang Hai
commit 20e6421344b5bc2f97b8e2db47b6994368417904 upstream. wl1251_event_ps_report() should not always return 0 because wl1251_ps_set_mode() may fail. Change it to return 'ret'. Fixes: f7ad1eed4d4b ("wl1251: retry power save entry") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200730073939.33704-1-wanghai38@huawei.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04rtw88: fix short GI capability based on current bandwidthTsang-Shian Lin
commit 4dd86b901d1373ef8446ecb50a7ca009f3475211 upstream. Fix the transmission is not sent with short GI under some conditions even if the receiver supports short GI. If VHT capability IE exists in the beacon, the original code uses the short GI for 80M field as driver's short GI setting for transmission, even the current bandwidth is not 80MHz. Short GI supported fields for 20M/40M are informed in HT capability information element, and short GI supported field for 80M is informed in VHT capability information element. These three fields may be set to different values. Driver needs to record each short GI support field for each bandwidth, and send correct info depends on current bandwidth to the WiFi firmware. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717064937.27966-3-yhchuang@realtek.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2020-09-04rtw88: fix LDPC field for RA infoTsang-Shian Lin
commit ae44fa993e8e6c1a1d22e5ca03d9eadd53b2745b upstream. Convert the type of LDPC field to boolen because LDPC field of RA info H2C command to firmware is only one bit. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Tsang-Shian Lin <thlin@realtek.com> Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200717064937.27966-2-yhchuang@realtek.com Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-23 15:08:16 +0000