aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/watchdog
AgeCommit message (Collapse)Author
2020-04-29watchdog: reset last_hw_keepalive time at startTero Kristo
[ Upstream commit 982bb70517aef2225bad1d802887b733db492cc0 ] Currently the watchdog core does not initialize the last_hw_keepalive time during watchdog startup. This will cause the watchdog to be pinged immediately if enough time has passed from the system boot-up time, and some types of watchdogs like K3 RTI does not like this. To avoid the issue, setup the last_hw_keepalive time during watchdog startup. Signed-off-by: Tero Kristo <t-kristo@ti.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200302200426.6492-3-t-kristo@ti.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-23watchdog: sp805: fix restart handlerMichael Walle
commit ea104a9e4d3e9ebc26fb78dac35585b142ee288b upstream. The restart handler is missing two things, first, the registers has to be unlocked and second there is no synchronization for the write_relaxed() calls. This was tested on a custom board with the NXP LS1028A SoC. Fixes: 6c5c0d48b686c ("watchdog: sp805: add restart handler") Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200327162450.28506-1-michael@walle.cc Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-08watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optionalMika Westerberg
commit e42b0c24389d5a1602e77db4f6def0d5a19e3e43 upstream. The iTCO_wdt driver only needs ICH_RES_IO_SMI I/O resource when either turn_SMI_watchdog_clear_off module parameter is set to match ->iTCO_version (or higher), and when legacy iTCO_vendorsupport is set. Modify the driver so that ICH_RES_IO_SMI is optional if the two conditions are not met. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-08watchdog: iTCO_wdt: Export vendorsupportMika Westerberg
commit 7ca6ee38909109751bfab79e9f6c570d2ed258c6 upstream. In preparation for making ->smi_res optional the iTCO_wdt driver needs to know whether vendorsupport is being set to non-zero. For this reason export the variable. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21ACPI: watchdog: Set default timeout in probeMika Westerberg
[ Upstream commit cabe17d0173ab04bd3f87b8199ae75f43f1ea473 ] If the BIOS default timeout for the watchdog is too small userspace may not have enough time to configure new timeout after opening the device before the system is already reset. For this reason program default timeout of 30 seconds in the driver probe and allow userspace to change this from command line or through module parameter (wdat_wdt.timeout). Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-12watchdog: da9062: do not ping the hw during stop()Marco Felsch
[ Upstream commit e9a0e65eda3f78d0b04ec6136c591c000cbc3b76 ] The da9062 hw has a minimum ping cool down phase of at least 200ms. The driver takes that into account by setting the min_hw_heartbeat_ms to 300ms and the core guarantees that the hw limit is observed for the ping() calls. But the core can't guarantee the required minimum ping cool down phase if a stop() command is send immediately after the ping() command. So it is not allowed to ping the watchdog within the stop() command as the driver does. Remove the ping can be done without doubts because the watchdog gets disabled anyway and a (re)start resets the watchdog counter too. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200120091729.16256-1-m.felsch@pengutronix.de [groeck: Updated description] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-03-05ACPI: watchdog: Fix gas->access_width usageMika Westerberg
commit 2ba33a4e9e22ac4dda928d3e9b5978a3a2ded4e0 upstream. ACPI Generic Address Structure (GAS) access_width field is not in bytes as the driver seems to expect in few places so fix this by using the newly introduced macro ACPI_ACCESS_BYTE_WIDTH(). Fixes: b1abf6fc4982 ("ACPI / watchdog: Fix off-by-one error at resource assignment") Fixes: 058dfc767008 ("ACPI / watchdog: Add support for WDAT hardware watchdog") Reported-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Cc: 4.16+ <stable@vger.kernel.org> # 4.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-14drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probeChristophe Roullier
commit 85fdc63fe256b595f923a69848cd99972ff446d8 upstream. If the watchdog hardware is already enabled during the boot process, when the Linux watchdog driver loads, it should start/reset the watchdog and tell the watchdog framework. As a result, ping can be generated from the watchdog framework (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set), until the userspace watchdog daemon takes over control Fixes:4332d113c66a ("watchdog: Add STM32 IWDG driver") Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191122132246.8473-1-christophe.roullier@st.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-14watchdog: qcom: Use platform_get_irq_optional() for bark irqSai Prakash Ranjan
commit e0b4f4e0cf7fa9d62628d4249c765ec18dffd143 upstream. platform_get_irq() prints an error message when the interrupt is not available. So on platforms where bark interrupt is not specified, following error message is observed on SDM845. [ 2.975888] qcom_wdt 17980000.watchdog: IRQ index 0 not found This is also seen on SC7180, SM8150 SoCs as well. Fix this by using platform_get_irq_optional() instead. Fixes: 36375491a4395654 ("watchdog: qcom: support pre-timeout when the bark irq is available") Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20191213064934.4112-1-saiprakash.ranjan@codeaurora.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11watchdog: fix UAF in reboot notifier handling in watchdog core codeVladis Dronov
commit 69503e585192fdd84b240f18a0873d20e18a2e0a upstream. After the commit 44ea39420fc9 ("drivers/watchdog: make use of devm_register_reboot_notifier()") the struct notifier_block reboot_nb in the struct watchdog_device is removed from the reboot notifiers chain at the time watchdog's chardev is closed. But at least in i6300esb.c case reboot_nb is embedded in the struct esb_dev which can be freed on its device removal and before the chardev is closed, thus UAF at reboot: [ 7.728581] esb_probe: esb_dev.watchdog_device ffff91316f91ab28 ts# uname -r note the address ^^^ 5.5.0-rc5-ae6088-wdog ts# ./openwdog0 & [1] 696 ts# opened /dev/watchdog0, sleeping 10s... ts# echo 1 > /sys/devices/pci0000\:00/0000\:00\:09.0/remove [ 178.086079] devres:rel_nodes: dev ffff91317668a0b0 data ffff91316f91ab28 esb_dev.watchdog_device.reboot_nb memory is freed here ^^^ ts# ...woken up [ 181.459010] devres:rel_nodes: dev ffff913171781000 data ffff913174a1dae8 [ 181.460195] devm_unreg_reboot_notifier: res ffff913174a1dae8 nb ffff91316f91ab78 attempt to use memory already freed ^^^ [ 181.461063] devm_unreg_reboot_notifier: nb->call 6b6b6b6b6b6b6b6b [ 181.461243] devm_unreg_reboot_notifier: nb->next 6b6b6b6b6b6b6b6b freed memory is filled with a slub poison ^^^ [1]+ Done ./openwdog0 ts# reboot [ 229.921862] systemd-shutdown[1]: Rebooting. [ 229.939265] notifier_call_chain: nb ffffffff9c6c2f20 nb->next ffffffff9c6d50c0 [ 229.943080] notifier_call_chain: nb ffffffff9c6d50c0 nb->next 6b6b6b6b6b6b6b6b [ 229.946054] notifier_call_chain: nb 6b6b6b6b6b6b6b6b INVAL [ 229.957584] general protection fault: 0000 [#1] SMP [ 229.958770] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 5.5.0-rc5-ae6088-wdog [ 229.960224] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 229.963288] RIP: 0010:notifier_call_chain+0x66/0xd0 [ 229.969082] RSP: 0018:ffffb20dc0013d88 EFLAGS: 00010246 [ 229.970812] RAX: 000000000000002e RBX: 6b6b6b6b6b6b6b6b RCX: 00000000000008b3 [ 229.972929] RDX: 0000000000000000 RSI: 0000000000000096 RDI: ffffffff9ccc46ac [ 229.975028] RBP: 0000000000000001 R08: 0000000000000000 R09: 00000000000008b3 [ 229.977039] R10: 0000000000000001 R11: ffffffff9c26c740 R12: 0000000000000000 [ 229.979155] R13: 6b6b6b6b6b6b6b6b R14: 0000000000000000 R15: 00000000fffffffa ... slub_debug=FZP poison ^^^ [ 229.989089] Call Trace: [ 229.990157] blocking_notifier_call_chain+0x43/0x59 [ 229.991401] kernel_restart_prepare+0x14/0x30 [ 229.992607] kernel_restart+0x9/0x30 [ 229.993800] __do_sys_reboot+0x1d2/0x210 [ 230.000149] do_syscall_64+0x3d/0x130 [ 230.001277] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 230.002639] RIP: 0033:0x7f5461bdd177 [ 230.016402] Modules linked in: i6300esb [ 230.050261] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Fix the crash by reverting 44ea39420fc9 so unregister_reboot_notifier() is called when watchdog device is removed. This also makes handling of the reboot notifier unified with the handling of the restart handler, which is freed with unregister_restart_handler() in the same place. Fixes: 44ea39420fc9 ("drivers/watchdog: make use of devm_register_reboot_notifier()") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Vladis Dronov <vdronov@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200108125347.6067-1-vdronov@redhat.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-01watchdog: orion: fix platform_get_irq() complaintsRussell King
[ Upstream commit dcbce5fbcc69bf2553f650004aad44bf390eca73 ] Fix: orion_wdt f1020300.watchdog: IRQ index 1 not found which is caused by platform_get_irq() now complaining when optional IRQs are not found. Neither interrupt for orion is required, so make them both optional. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/E1iahcN-0000AT-Co@rmk-PC.armlinux.org.uk Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-01watchdog: rn5t618_wdt: fix module aliasesAndreas Kemnade
[ Upstream commit a76dfb859cd42df6e3d1910659128ffcd2fb6ba2 ] Platform device aliases were missing so module autoloading did not work. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191213214802.22268-1-andreas@kemnade.info Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-01watchdog: max77620_wdt: fix potential build errorsDavid Engraf
[ Upstream commit da9e3f4e30a53cd420cf1e6961c3b4110f0f21f0 ] max77620_wdt uses watchdog core functions. Enable CONFIG_WATCHDOG_CORE to fix potential build errors. Signed-off-by: David Engraf <david.engraf@sysgo.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191127084617.16937-1-david.engraf@sysgo.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-26watchdog: sprd: Fix the incorrect pointer getting from driver dataShuiqing Li
commit 39e68d9e7ab276880980ee5386301fb218202192 upstream. The device driver data saved the 'struct sprd_wdt' object, it is incorrect to get 'struct watchdog_device' object from the driver data, thus fix it. Fixes: 477603467009 ("watchdog: Add Spreadtrum watchdog driver") Reported-by: Dongwei Wang <dongwei.wang@unisoc.com> Signed-off-by: Shuiqing Li <shuiqing.li@unisoc.com> Signed-off-by: Baolin Wang <baolin.wang@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/76d4687189ec940baa90cb8d679a8d4c8f02ee80.1573210405.git.baolin.wang@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-09watchdog: tqmx86_wdt: Fix build errorYueHaibing
commit 9a6c274ac1c4346f5384f2290caeb42dc674c471 upstream. If TQMX86_WDT is y and WATCHDOG_CORE is m, building fails: drivers/watchdog/tqmx86_wdt.o: In function `tqmx86_wdt_probe': tqmx86_wdt.c:(.text+0x46e): undefined reference to `watchdog_init_timeout' tqmx86_wdt.c:(.text+0x4e0): undefined reference to `devm_watchdog_register_device' Select WATCHDOG_CORE to fix this. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: e3c21e088f89 ("watchdog: tqmx86: Add watchdog driver for the IO controller") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191206124259.25880-1-yuehaibing@huawei.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-04watchdog: Fix the race between the release of watchdog_core_data and cdevKevin Hao
[ Upstream commit 72139dfa2464e43957d330266994740bb7be2535 ] The struct cdev is embedded in the struct watchdog_core_data. In the current code, we manage the watchdog_core_data with a kref, but the cdev is manged by a kobject. There is no any relationship between this kref and kobject. So it is possible that the watchdog_core_data is freed before the cdev is entirely released. We can easily get the following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and CONFIG_DEBUG_OBJECTS_TIMERS enabled. ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38 WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0 Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 00400009 (nzcv daif +PAN -UAO) pc : debug_print_object+0xb0/0xf0 lr : debug_print_object+0xb0/0xf0 sp : ffff80001cbcfc70 x29: ffff80001cbcfc70 x28: ffff800010ea2128 x27: ffff800010bad000 x26: 0000000000000000 x25: ffff80001103c640 x24: ffff80001107b268 x23: ffff800010bad9e8 x22: ffff800010ea2128 x21: ffff000bc2c62af8 x20: ffff80001103c600 x19: ffff800010e867d8 x18: 0000000000000060 x17: 0000000000000000 x16: 0000000000000000 x15: ffff000bd7240470 x14: 6e6968207473696c x13: 5f72656d6974203a x12: 6570797420746365 x11: 6a626f2029302065 x10: 7461747320657669 x9 : 7463612820657669 x8 : 3378302f3078302b x7 : 0000000000001d7a x6 : ffff800010fd5889 x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 x2 : ffff000bff948548 x1 : 276a1c9e1edc2300 x0 : 0000000000000000 Call trace: debug_print_object+0xb0/0xf0 debug_check_no_obj_freed+0x1e8/0x210 kfree+0x1b8/0x368 watchdog_cdev_unregister+0x88/0xc8 watchdog_dev_unregister+0x38/0x48 watchdog_unregister_device+0xa8/0x100 softdog_exit+0x18/0xfec4 [softdog] __arm64_sys_delete_module+0x174/0x200 el0_svc_handler+0xd0/0x1c8 el0_svc+0x8/0xc This is a common issue when using cdev embedded in a struct. Fortunately, we already have a mechanism to solve this kind of issue. Please see commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device") for more detail. In this patch, we choose to embed the struct device into the watchdog_core_data, and use the API provided by the commit 233ed09d7fda to make sure that the release of watchdog_core_data and cdev are in sequence. Signed-off-by: Kevin Hao <haokexin@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04watchdog: prevent deferral of watchdogd wakeup on RTJulia Cartwright
[ Upstream commit a19f89335f4bda3d77d991c96583e3e51856acbb ] When PREEMPT_RT is enabled, all hrtimer expiry functions are deferred for execution into the context of ksoftirqd unless otherwise annotated. Deferring the expiry of the hrtimer used by the watchdog core, however, is a waste, as the callback does nothing but queue a kthread work item and wakeup watchdogd. It's worst then that, too: the deferral through ksoftirqd also means that for correct behavior a user must adjust the scheduling parameters of both watchdogd _and_ ksoftirqd, which is unnecessary and has other side effects (like causing unrelated expiry functions to execute at potentially elevated priority). Instead, mark the hrtimer used by the watchdog core as being _HARD to allow it's execution directly from hardirq context. The work done in this expiry function is well-bounded and minimal. A user still must adjust the scheduling parameters of the watchdogd to be correct w.r.t. their application needs. Link: https://lkml.kernel.org/r/0e02d8327aeca344096c246713033887bc490dd7.1538089180.git.julia@ni.com Cc: Guenter Roeck <linux@roeck-us.net> Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reported-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Julia Cartwright <julia@ni.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [bigeasy: use only HRTIMER_MODE_REL_HARD] Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191105144506.clyadjbvnn7b7b2m@linutronix.de Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-04watchdog: imx7ulp: Fix reboot hangFabio Estevam
[ Upstream commit 6083ab7b2f3f25022e2e8f4c42f14a8521f47873 ] The following hang is observed when a 'reboot' command is issued: # reboot # Stopping network: OK Stopping klogd: OK Stopping syslogd: OK umount: devtmpfs busy - remounted read-only [ 8.612079] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) The system is going down NOW! Sent SIGTERM to all processes Sent SIGKILL to all processes Requesting system reboot [ 10.694753] reboot: Restarting system [ 11.699008] Reboot failed -- System halted Fix this problem by adding a .restart ops member. Fixes: 41b630f41bf7 ("watchdog: Add i.MX7ULP watchdog support") Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191029174037.25381-1-festevam@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-13watchdog: aspeed: Fix clock behaviour for ast2600Joel Stanley
[ Upstream commit c04571251b3d842096f1597f5d4badb508be016d ] The ast2600 no longer uses bit 4 in the control register to indicate a 1MHz clock (It now controls whether this watchdog is reset by a SOC reset). This means we do not want to set it. It also does not need to be set for the ast2500, as it is read-only on that SoC. The comment next to the clock rate selection wandered away from where it was set, so put it back next to the register setting it's describing. Fixes: b3528b487448 ("watchdog: aspeed: Add support for AST2600") Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20191108032905.22463-1-joel@jms.id.au Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-11-05watchdog: bd70528: Add MODULE_ALIAS to allow module auto loadingMatti Vaittinen
The bd70528 watchdog driver is probed by MFD driver. Add MODULE_ALIAS in order to allow udev to load the module when MFD sub-device cell for watchdog is added. Fixes: bbc88a0ec9f37 ("watchdog: bd70528: Initial support for ROHM BD70528 watchdog block") Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware formatAnson Huang
SCU firmware calculates pretimeout based on current time stamp instead of watchdog timeout stamp, need to convert the pretimeout to SCU firmware's timeout value. Fixes: 15f7d7fc5542 ("watchdog: imx_sc: Add pretimeout support") Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05watchdog: meson: Fix the wrong value of left timeXingyu Chen
The left time value is wrong when we get it by sysfs. The left time value should be equal to preset timeout value minus elapsed time value. According to the Meson-GXB/GXL datasheets which can be found at [0], the timeout value is saved to BIT[0-15] of the WATCHDOG_TCNT, and elapsed time value is saved to BIT[16-31] of the WATCHDOG_TCNT. [0]: http://linux-meson.com Fixes: 683fa50f0e18 ("watchdog: Add Meson GXBB Watchdog Driver") Signed-off-by: Xingyu Chen <xingyu.chen@amlogic.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05watchdog: pm8916_wdt: fix pretimeout registration flowJorge Ramirez-Ortiz
When an IRQ is present in the dts, the probe function shall fail if the interrupt can not be registered. The probe function shall also be retried if getting the irq is being deferred. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-11-05watchdog: cpwd: fix build regressionArnd Bergmann
The compat_ptr_ioctl() infrastructure did not make it into linux-5.4, so cpwd now fails to build. Fix it by using an open-coded version. Fixes: 68f28b01fb9e ("watchdog: cpwd: use generic compat_ptr_ioctl") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-27Merge tag 'linux-watchdog-5.4-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - addition of AST2600, i.MX7ULP and F81803 watchdog support - removal of the w90x900 and ks8695 drivers - ziirave_wdt improvements - small fixes and improvements * tag 'linux-watchdog-5.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (51 commits) watchdog: f71808e_wdt: Add F81803 support watchdog: qcom: remove unnecessary variable from private storage watchdog: qcom: support pre-timeout when the bark irq is available watchdog: imx_sc: this patch just fixes whitespaces watchdog: apseed: Add access_cs0 option for alt-boot watchdog: aspeed: add support for dual boot watchdog: orion_wdt: use timer1 as a pretimeout watchdog: Add i.MX7ULP watchdog support dt-bindings: watchdog: Add i.MX7ULP bindings dt-bindings: watchdog: sun4i: Add the watchdog clock dt-bindings: watchdog: sun4i: Add the watchdog interrupts dt-bindings: watchdog: Convert Allwinner watchdog to a schema dt-bindings: watchdog: Add YAML schemas for the generic watchdog bindings watchdog: aspeed: Add support for AST2600 dt-bindings: watchdog: Add ast2600 compatible watchdog: ziirave_wdt: Update checked I2C functionality mask watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data() watchdog: ziirave_wdt: Fix DOWNLOAD_START payload watchdog: ziirave_wdt: Drop status polling code watchdog: ziirave_wdt: Fix RESET_PROCESSOR payload ...
2019-09-24Merge branch 'i2c/for-5.4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - new driver for ICY, an Amiga Zorro card :) - axxia driver gained slave mode support, NXP driver gained ACPI - the slave EEPROM backend gained 16 bit address support - and lots of regular driver updates and reworks * 'i2c/for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (52 commits) i2c: tegra: Move suspend handling to NOIRQ phase i2c: imx: ACPI support for NXP i2c controller i2c: uniphier(-f): remove all dev_dbg() i2c: uniphier(-f): use devm_platform_ioremap_resource() i2c: slave-eeprom: Add comment about address handling i2c: exynos5: Remove IRQF_ONESHOT i2c: stm32f7: Make structure stm32f7_i2c_algo constant i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe i2c-eeprom_slave: Add support for more eeprom models i2c: fsi: Add of_put_node() before break i2c: synquacer: Make synquacer_i2c_ops constant i2c: hix5hd2: Remove IRQF_ONESHOT i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond watchdog: iTCO: Add support for Cannon Lake PCH iTCO i2c: iproc: Make bcm_iproc_i2c_quirks constant i2c: iproc: Add full name of devicetree node to adapter name i2c: piix4: Add ACPI support i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h i2c: ocores: use request_any_context_irq() to register IRQ handler i2c: designware: Fix optional reset error handling ...
2019-09-17watchdog: f71808e_wdt: Add F81803 supportJaret Cantu
This adds watchdog support for the Fintek F81803 Super I/O chip. Testing was done on the Seneca XK-QUAD. Signed-off-by: Jaret Cantu <jaret.cantu@timesys.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190912175550.9340-1-jaret.cantu@timesys.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: qcom: remove unnecessary variable from private storageJorge Ramirez-Ortiz
there is no need to continue keeping the clock in private storage. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190906205411.31666-3-jorge.ramirez-ortiz@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: qcom: support pre-timeout when the bark irq is availableJorge Ramirez-Ortiz
Use the bark interrupt as the pre-timeout notifier whenever this interrupt is available. By default, the pretimeout notification shall occur one second earlier than the timeout. Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190906205411.31666-2-jorge.ramirez-ortiz@linaro.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: imx_sc: this patch just fixes whitespacesOliver Graute
Fix only whitespace errors in imx_sc_wdt_probe() Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190905143644.20952-1-oliver.graute@kococonnector.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: aspeed: add support for dual bootIvan Mikhaylov
Set WDT_CLEAR_TIMEOUT_AND_BOOT_CODE_SELECTION into WDT_CLEAR_TIMEOUT_STATUS to clear out boot code source and re-enable access to the primary SPI flash chip while booted via wdt2 from the alternate chip. AST2400 datasheet says: "In the 2nd flash booting mode, all the address mapping to CS0# would be re-directed to CS1#. And CS0# is not accessible under this mode. To access CS0#, firmware should clear the 2nd boot mode register in the WDT2 status register WDT30.bit[1]." Signed-off-by: Ivan Mikhaylov <i.mikhaylov@yadro.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190828102402.13155-4-i.mikhaylov@yadro.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: orion_wdt: use timer1 as a pretimeoutChris Packham
The orion watchdog can either reset the CPU or generate an interrupt. The interrupt would be useful for debugging as it provides panic() output about the watchdog expiry, however if the interrupt is used the watchdog can't reset the CPU in the event of being stuck in a loop with interrupts disabled or if the CPU is prevented from accessing memory (e.g. an unterminated DMA). The Armada SoCs have spare timers that aren't currently used by the Linux kernel. We can use timer1 to provide a pre-timeout ahead of the watchdog timer and provide the possibility of gathering debug before the reset triggers. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190829215224.27956-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: Add i.MX7ULP watchdog supportAnson Huang
The i.MX7ULP Watchdog Timer (WDOG) module is an independent timer that is available for system use. It provides a safety feature to ensure that software is executing as planned and that the CPU is not stuck in an infinite loop or executing unintended code. If the WDOG module is not serviced (refreshed) within a certain period, it resets the MCU. Add driver support for i.MX7ULP watchdog. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/1566999303-18795-2-git-send-email-Anson.Huang@nxp.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: aspeed: Add support for AST2600Ryan Chen
The ast2600 can be supported by the same code as the ast2500. Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com> Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190819051738.17370-3-joel@jms.id.au Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Update checked I2C functionality maskAndrey Smirnov
Update checked I2C functionality mask to reflect all of the SMBus primitives used by this driver. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-23-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data()Andrey Smirnov
There's only one user of ziirave_firm_write_block_data(), so we may as well inline it. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-22-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix DOWNLOAD_START payloadAndrey Smirnov
Bootloader firmware expects the following traffic for DOWNLOAD_END: S Addr Wr [A] 0x10 [A] P using ziirave_firm_write_byte() will result in S Addr Wr [A] 0x10 [A] 0x01 [A] 0x01 [A] P which happens to work because firmware will ignore any extra bytes sent. Fix this by converting the code to use i2c_smbus_write_byte() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-21-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Drop status polling codeAndrey Smirnov
Bootloader firmware doesn't implement DOWNLOAD_START or DOWNLOAD_PACKET in a non-blocking way. It will stretch the clock of the first status byte read until the operation is complete. Polling for the status is not really necessary since it will always succed on the first try. Replace polling code with a simple single byte read to simplify things. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-20-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix RESET_PROCESSOR payloadAndrey Smirnov
Bootloader firmware expects the following traffic for RESET_PROCESSOR: S Addr Wr [A] 0x0b [A] 0x01 [A] P using ziirave_firm_write_byte() will result in S Addr Wr [A] 0x0b [A] 0x01 [A] 0x01 [A] P which happens to work because firmware will ignore any extra bytes and expected magic value matches byte count sent by i2c_smbus_write_block_data(). Fix this by converting the code to use i2c_smbus_write_byte_data() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-19-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix DOWNLOAD_END payloadAndrey Smirnov
Bootloader firmware expects the following traffic for DOWNLOAD_END: S Addr Wr [A] 0x11 [A] P using ziirave_firm_write_byte() will result in S Addr Wr [A] 0x11 [A] 0x01 [A] 0x01 [A] P which happens to work because firmware will ignore any extra bytes sent. Fix this by converting the code to use i2c_smbus_write_byte() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-18-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix JUMP_TO_BOOTLOADER payloadAndrey Smirnov
Bootloader firmware expects the following traffic for JUMP_TO_BOOTLOADER: S Addr Wr [A] 0x0c [A] 0x01 [A] P using ziirave_firm_write_byte() will result in S Addr Wr [A] 0x0c [A] 0x01 [A] 0x01 [A] P which happens to work because firmware will ignore any extra bytes and expected magic value matches byte count sent by i2c_smbus_write_block_data(). Fix this by converting the code to use i2c_smbus_write_byte_data() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-17-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix misleading error messageAndrey Smirnov
Fix misleading error message in ziirave_wdt_init_duration(). Saying "unable to set ..." implies that an attempt at communication with watchdog device has taken palce and was not successful. In this case, however, all it indicates is that no reset pulse duration was specified either via kernel parameter or Device Tree. Re-phase the log message to be more clear about benign nature of this event. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-16-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't try to program readonly flashAndrey Smirnov
Bootloader code will ignore any attempts to write data to any flash area outside of [ZIIRAVE_FIRM_FLASH_MEMORY_START; ZIIRAVE_FIRM_FLASH_MEMORY_END]. Firmware update code already have an appropriate check to skip those areas when validating updated firmware. Firmware programming code, OTOH, does not and will needlessly send no-op I2C traffic. Add an appropriate check to __ziirave_firm_write_pkt() so as to save all of that wasted effort. While at it, normalize all of the address handling code to use full 32-bit address in units of bytes and convert it to an appropriate value only in places where that is necessary. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-15-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't read out more than 'len' firmware bytesAndrey Smirnov
We only compare first 'len' bytes of read firmware, so we don't need to read more that that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-14-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Don't check if ihex record length is zeroAndrey Smirnov
Ihex_next_binrec() will return NULL if next record's 'len' is zero, so explicit checks for that in the driver are unnecessary. Drop them. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-13-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Make use of put_unaligned_le16Andrey Smirnov
Instead of doing this explicitly use put_unaligned_le16() to place 16-bit address value into command payload. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-12-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Zero out only what's necessaryAndrey Smirnov
Instead of zeroing out all of the packet and then overwriting a significant portion of those zeros via memcpy(), zero out only a portion of the packet that is known to not contain any data. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-11-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Fix incorrect use of ARRAY_SIZEAndrey Smirnov
Both memset() and ziirave_firm_write_block_data() expect length in bytes as an argument, not a number of elements in array. It just happens that in this particular case both values are equal. Modify the code to use sizeof() instead. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-10-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Skip zeros when calculating checksumAndrey Smirnov
Zeros don't contribute anything to checksum value, so we can skip unused portion of the packet when calculating its checksum. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-9-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2019-09-17watchdog: ziirave_wdt: Check packet length only onceAndrey Smirnov
We don't need to check for packet length more than once, so drop the extra check in ziirave_firm_upload(). While at it move the check at the very start of __ziirave_firm_write_pkt(), as to not waste any time preparing a packet we'll never use. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Cc: Chris Healy <cphealy@gmail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Rick Ramstetter <rick@anteaterllc.com> Cc: linux-watchdog@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20190812200906.31344-8-andrew.smirnov@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-30 00:10:02 +0000