| Age | Commit message (Collapse) | Author |
|---|
|
Pull SCSI updates from James Bottomley:
"This consists of the usual driver updates (ufs, qla2xxx, tcmu, lpfc,
hpsa, zfcp, scsi_debug) and minor bug fixes.
We also have a huge docbook fix update like most other subsystems and
no major update to the core (the few non trivial updates are either
minor fixes or removing an unused feature [scsi_sdb_cache])"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (307 commits)
scsi: scsi_transport_srp: Sanitize scsi_target_block/unblock sequences
scsi: ufs-mediatek: Apply DELAY_AFTER_LPM quirk to Micron devices
scsi: ufs: Introduce device quirk "DELAY_AFTER_LPM"
scsi: virtio-scsi: Correctly handle the case where all LUNs are unplugged
scsi: scsi_debug: Implement tur_ms_to_ready parameter
scsi: scsi_debug: Fix request sense
scsi: lpfc: Fix typo in comment for ULP
scsi: ufs-mediatek: Prevent LPM operation on undeclared VCC
scsi: iscsi: Do not put host in iscsi_set_flashnode_param()
scsi: hpsa: Correct ctrl queue depth
scsi: target: tcmu: Make TMR notification optional
scsi: target: tcmu: Implement tmr_notify callback
scsi: target: tcmu: Fix and simplify timeout handling
scsi: target: tcmu: Factor out new helper ring_insert_padding
scsi: target: tcmu: Do not queue aborted commands
scsi: target: tcmu: Use priv pointer in se_cmd
scsi: target: Add tmr_notify backend function
scsi: target: Modify core_tmr_abort_task()
scsi: target: iscsi: Fix inconsistent debug message
scsi: target: iscsi: Fix login error when receiving
...
|
|
Pull core block updates from Jens Axboe:
"Good amount of cleanups and tech debt removals in here, and as a
result, the diffstat shows a nice net reduction in code.
- Softirq completion cleanups (Christoph)
- Stop using ->queuedata (Christoph)
- Cleanup bd claiming (Christoph)
- Use check_events, moving away from the legacy media change
(Christoph)
- Use inode i_blkbits consistently (Christoph)
- Remove old unused writeback congestion bits (Christoph)
- Cleanup/unify submission path (Christoph)
- Use bio_uninit consistently, instead of bio_disassociate_blkg
(Christoph)
- sbitmap cleared bits handling (John)
- Request merging blktrace event addition (Jan)
- sysfs add/remove race fixes (Luis)
- blk-mq tag fixes/optimizations (Ming)
- Duplicate words in comments (Randy)
- Flush deferral cleanup (Yufen)
- IO context locking/retry fixes (John)
- struct_size() usage (Gustavo)
- blk-iocost fixes (Chengming)
- blk-cgroup IO stats fixes (Boris)
- Various little fixes"
* tag 'for-5.9/block-20200802' of git://git.kernel.dk/linux-block: (135 commits)
block: blk-timeout: delete duplicated word
block: blk-mq-sched: delete duplicated word
block: blk-mq: delete duplicated word
block: genhd: delete duplicated words
block: elevator: delete duplicated word and fix typos
block: bio: delete duplicated words
block: bfq-iosched: fix duplicated word
iocost_monitor: start from the oldest usage index
iocost: Fix check condition of iocg abs_vdebt
block: Remove callback typedefs for blk_mq_ops
block: Use non _rcu version of list functions for tag_set_list
blk-cgroup: show global disk stats in root cgroup io.stat
blk-cgroup: make iostat functions visible to stat printing
block: improve discard bio alignment in __blkdev_issue_discard()
block: change REQ_OP_ZONE_RESET and REQ_OP_ZONE_RESET_ALL to be odd numbers
block: defer flush request no matter whether we have elevator
block: make blk_timeout_init() static
block: remove retry loop in ioc_release_fn()
block: remove unnecessary ioc nested locking
block: integrate bd_start_claiming into __blkdev_get
...
|
|
The scsi_host_block() case was missing in commit 4dea170f4fb2 ("scsi: core:
Fix incorrect usage of shost_for_each_device").
Link: https://lore.kernel.org/r/20200717090921.29243-1-yebin10@huawei.com
Fixes: 2bb955840c1d ("scsi: core: add scsi_host_(block,unblock) helper function")
Fixes: 4dea170f4fb2 ("scsi: core: Fix incorrect usage of shost_for_each_device")
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
I/O requests may be held in scheduler queue because of resource contention.
The starvation scenario was handled properly in the regular completion
path but we failed to account for it during I/O submission. This lead to
the hang captured below. Make sure we run the queue when resource
contention is encountered in the submission path.
[ 39.054963] scsi 13:0:0:0: rejecting I/O to dead device
[ 39.058700] scsi 13:0:0:0: rejecting I/O to dead device
[ 39.087855] sd 13:0:0:1: [sdd] Synchronizing SCSI cache
[ 39.088909] scsi 13:0:0:1: rejecting I/O to dead device
[ 39.095351] scsi 13:0:0:1: rejecting I/O to dead device
[ 39.096962] scsi 13:0:0:1: rejecting I/O to dead device
[ 247.021859] INFO: task scsi-stress-rem:813 blocked for more than 122 seconds.
[ 247.023258] Not tainted 5.8.0-rc2 #8
[ 247.024069] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 247.025331] scsi-stress-rem D 0 813 802 0x00004000
[ 247.025334] Call Trace:
[ 247.025354] __schedule+0x504/0x55f
[ 247.027987] schedule+0x72/0xa8
[ 247.027991] blk_mq_freeze_queue_wait+0x63/0x8c
[ 247.027994] ? do_wait_intr_irq+0x7a/0x7a
[ 247.027996] blk_cleanup_queue+0x4b/0xc9
[ 247.028000] __scsi_remove_device+0xf6/0x14e
[ 247.028002] scsi_remove_device+0x21/0x2b
[ 247.029037] sdev_store_delete+0x58/0x7c
[ 247.029041] kernfs_fop_write+0x10d/0x14f
[ 247.031281] vfs_write+0xa2/0xdf
[ 247.032670] ksys_write+0x6b/0xb3
[ 247.032673] do_syscall_64+0x56/0x82
[ 247.034053] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 247.034059] RIP: 0033:0x7f69f39e9008
[ 247.036330] Code: Bad RIP value.
[ 247.036331] RSP: 002b:00007ffdd8116498 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 247.037613] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f69f39e9008
[ 247.039714] RDX: 0000000000000002 RSI: 000055cde92a0ab0 RDI: 0000000000000001
[ 247.039715] RBP: 000055cde92a0ab0 R08: 000000000000000a R09: 00007f69f3a79e80
[ 247.039716] R10: 000000000000000a R11: 0000000000000246 R12: 00007f69f3abb780
[ 247.039717] R13: 0000000000000002 R14: 00007f69f3ab6740 R15: 0000000000000002
Link: https://lore.kernel.org/r/20200720025435.812030-1-ming.lei@redhat.com
Cc: linux-block@vger.kernel.org
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
blk-mq budget is abstract from scsi's device queue depth, and it is
always per-request-queue instead of hctx.
It can be quite absurd to get a budget from one hctx, then dequeue a
request from scheduler queue, and this request may not belong to this
hctx, at least for bfq and deadline.
So fix the mess and always pass request queue to get/put budget
callback.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Baolin Wang <baolin.wang7@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Baolin Wang <baolin.wang7@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Move the call to blk_should_fake_timeout out of blk_mq_complete_request
and into the drivers, skipping call sites that are obvious error
handlers, and remove the now superflous blk_mq_force_complete_rq helper.
This ensures we don't keep injecting errors into completions that just
terminate the Linux request after the hardware has been reset or the
command has been aborted.
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Delete trailing whitespace, multiple blank lines, and make switch/case be
at the same indentation.
Link: https://lore.kernel.org/r/20200619154117.10262-3-huobean@gmail.com
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
After commit f664a3cc17b7 ("scsi: kill off the legacy IO path"),
scsi_sdb_cache is not used anymore. Remove it.
Link: https://lore.kernel.org/r/20200619154117.10262-2-huobean@gmail.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
:This series consists of the usual driver updates (qla2xxx, ufs, zfcp,
target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host
of other minor updates.
There are no major core changes in this series apart from a
refactoring in scsi_lib.c"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (207 commits)
scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes
scsi: cxgb3i: Fix some leaks in init_act_open()
scsi: ibmvscsi: Make some functions static
scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim
scsi: ufs: Fix WriteBooster flush during runtime suspend
scsi: ufs: Fix index of attributes query for WriteBooster feature
scsi: ufs: Allow WriteBooster on UFS 2.2 devices
scsi: ufs: Remove unnecessary memset for dev_info
scsi: ufs-qcom: Fix scheduling while atomic issue
scsi: mpt3sas: Fix reply queue count in non RDPQ mode
scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event
scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()
scsi: vhost: Notify TCM about the maximum sg entries supported per command
scsi: qla2xxx: Remove return value from qla_nvme_ls()
scsi: qla2xxx: Remove an unused function
scsi: iscsi: Register sysfs for iscsi workqueue
scsi: scsi_debug: Parser tables and code interaction
scsi: core: Refactor scsi_mq_setup_tags function
scsi: core: Fix incorrect usage of shost_for_each_device
scsi: qla2xxx: Fix endianness annotations in source files
...
|
|
Pull block updates from Jens Axboe:
"Core block changes that have been queued up for this release:
- Remove dead blk-throttle and blk-wbt code (Guoqing)
- Include pid in blktrace note traces (Jan)
- Don't spew I/O errors on wouldblock termination (me)
- Zone append addition (Johannes, Keith, Damien)
- IO accounting improvements (Konstantin, Christoph)
- blk-mq hardware map update improvements (Ming)
- Scheduler dispatch improvement (Salman)
- Inline block encryption support (Satya)
- Request map fixes and improvements (Weiping)
- blk-iocost tweaks (Tejun)
- Fix for timeout failing with error injection (Keith)
- Queue re-run fixes (Douglas)
- CPU hotplug improvements (Christoph)
- Queue entry/exit improvements (Christoph)
- Move DMA drain handling to the few drivers that use it (Christoph)
- Partition handling cleanups (Christoph)"
* tag 'for-5.8/block-2020-06-01' of git://git.kernel.dk/linux-block: (127 commits)
block: mark bio_wouldblock_error() bio with BIO_QUIET
blk-wbt: rename __wbt_update_limits to wbt_update_limits
blk-wbt: remove wbt_update_limits
blk-throttle: remove tg_drain_bios
blk-throttle: remove blk_throtl_drain
null_blk: force complete for timeout request
blk-mq: drain I/O when all CPUs in a hctx are offline
blk-mq: add blk_mq_all_tag_iter
blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx
blk-mq: use BLK_MQ_NO_TAG in more places
blk-mq: rename BLK_MQ_TAG_FAIL to BLK_MQ_NO_TAG
blk-mq: move more request initialization to blk_mq_rq_ctx_init
blk-mq: simplify the blk_mq_get_request calling convention
blk-mq: remove the bio argument to ->prepare_request
nvme: force complete cancelled requests
blk-mq: blk-mq: provide forced completion method
block: fix a warning when blkdev.h is included for !CONFIG_BLOCK builds
block: blk-crypto-fallback: remove redundant initialization of variable err
block: reduce part_stat_lock() scope
block: use __this_cpu_add() instead of access by smp_processor_id()
...
|
|
shost->tag_set is used too many times, introduce temporary parameter
tag_set instead of &shost->tag_set.
Link: https://lore.kernel.org/r/20200518074732.39679-1-yebin10@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
shost_for_each_device(sdev, shost) \
for ((sdev) = __scsi_iterate_devices((shost), NULL); \
(sdev); \
(sdev) = __scsi_iterate_devices((shost), (sdev)))
When terminating shost_for_each_device() iteration with break or return,
scsi_device_put() should be used to prevent stale scsi device references
from being left behind.
Link: https://lore.kernel.org/r/20200518074420.39275-1-yebin10@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ye Bin <yebin10@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Define REQ_OP_ZONE_APPEND to append-write sectors to a zone of a zoned
block device. This is a no-merge write operation.
A zone append write BIO must:
* Target a zoned block device
* Have a sector position indicating the start sector of the target zone
* The target zone must be a sequential write zone
* The BIO must not cross a zone boundary
* The BIO size must not be split to ensure that a single range of LBAs
is written with a single command.
Implement these checks in generic_make_request_checks() using the
helper function blk_check_zone_append(). To avoid write append BIO
splitting, introduce the new max_zone_append_sectors queue limit
attribute and ensure that a BIO size is always lower than this limit.
Export this new limit through sysfs and check these limits in bio_full().
Also when a LLDD can't dispatch a request to a specific zone, it
will return BLK_STS_ZONE_RESOURCE indicating this request needs to
be delayed, e.g. because the zone it will be dispatched to is still
write-locked. If this happens set the request aside in a local list
to continue trying dispatching requests such as READ requests or a
WRITE/ZONE_APPEND requests targetting other zones. This way we can
still keep a high queue depth without starving other requests even if
one request can't be served due to zone write-locking.
Finally, make sure that the bio sector position indicates the actual
write position as indicated by the device on completion.
Signed-off-by: Keith Busch <kbusch@kernel.org>
[ jth: added zone-append specific add_page and merge_page helpers ]
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
In case scsi_setup_fs_cmnd() fails we're not freeing the sgtables allocated
by scsi_init_io(), thus we leak the allocated memory.
Free the sgtables allocated by scsi_init_io() in case scsi_setup_fs_cmnd()
fails.
Technically scsi_setup_scsi_cmnd() does not suffer from this problem as it
can only fail if scsi_init_io() fails, so it does not have sgtables
allocated. But to maintain symmetry and as a measure of defensive
programming, free the sgtables on scsi_setup_scsi_cmnd() failure as well.
scsi_mq_free_sgtables() has safeguards against double-freeing of memory so
this is safe to do.
While we're at it, rename scsi_mq_free_sgtables() to scsi_free_sgtables().
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205595
Link: https://lore.kernel.org/r/20200428104605.8143-2-johannes.thumshirn@wdc.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Despite of functions being documented, they are not in the kernel-doc
specification, and could not be included in kernel documentation. Change
the style of functions comments to be compliant to the kernel-doc style.
When the function comments are outdated, update then.
[mkp: a few edits]
Link: https://lore.kernel.org/r/20200419050148.33371-1-andrealmeid@collabora.com
Signed-off-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_host_block() calls scsi_internal_device_block() for each scsi_device and
scsi_internal_device_block() calls blk_mq_quiesce_queue() for each LUN.
Since synchronize_rcu() is called from blk_mq_quiesce_queue(), this can cause
substantial slowdowns on systems with many LUNs.
Use scsi_internal_device_block_nowait() to implement scsi_host_block() so it
is sufficient to run synchronize_rcu() once. This is safe since SCSI does not
set the BLK_MQ_F_BLOCKING flag.
[mkp: commit desc and comment tweaks]
Link: https://lore.kernel.org/r/20200423020713.332743-1-ming.lei@redhat.com
Cc: Steffen Maier <maier@linux.ibm.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
There are only two callers of blk_rq_map_sg/__blk_rq_map_sg that set
the dma_pad value in the queue. Move the handling into those callers
instead of burdening the common code, and move the ->extra_len field
from struct request to struct scsi_cmnd.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Don't burden the common block code with with specifics of the libata DMA
draining mechanism. Instead move most of the code to the scsi midlayer.
That also means the nr_phys_segments adjustments in the blk-mq fast path
can go away entirely, given that SCSI never looks at nr_phys_segments
after mapping the request to a scatterlist.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
scsi_init_io is the only caller of scsi_init_sgtable. Merge the two
function to make upcoming changes a little easier.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The APIs scsi_host_block()/scsi_host_unblock() were recently added by
commit 2bb955840c1d ("scsi: core: add scsi_host_(block,unblock) helper
function") and so far the APIs are only used by: commit 3d3ca53b1639
("scsi: aacraid: use scsi_host_(block,unblock) to block I/O").
However, from reading the code, I think the APIs don't really work for
aacraid, because, in the resume path of hibernation, when aac_suspend() ->
scsi_host_block() is called, scsi_device_quiesce() has set the state to
SDEV_QUIESCE, so aac_suspend() -> scsi_host_block() returns -EINVAL.
Fix the issue by allowing the state change.
Link: https://lore.kernel.org/r/1587170445-50013-1-git-send-email-decui@microsoft.com
Fixes: 2bb955840c1d ("scsi: core: add scsi_host_(block,unblock) helper function")
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
idle"
This reverts commit 7e70aa789d4a0c89dbfbd2c8a974a4df717475ec.
Now that we have the patches ("blk-mq: In blk_mq_dispatch_rq_list()
"no budget" is a reason to kick") and ("blk-mq: Rerun dispatching in
the case of budget contention") we should no longer need the fix in
the SCSI code. Revert it, resolving conflicts with other patches that
have touched this code.
With this revert (and the two new patches) I can run the script that
was in commit 7e70aa789d4a ("scsi: core: run queue if SCSI device
queue isn't ready and queue is idle") in a loop with no failure. If I
do this revert without the two new patches I can easily get a failure.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Large queues of I/O to offline devices that are eventually submitted when
devices are unblocked result in a many repeated "rejecting I/O to offline
device" messages. These messages can fill up the dmesg buffer in crash
dumps so no useful prior messages remain. In addition, if a serial console
is used, the flood of messages can cause a hard lockup in the console code.
Introduce a flag indicating the message has already been logged for the
device, and reset the flag when scsi_device_set_state() changes the device
state.
Link: https://lore.kernel.org/r/20200311143930.20674-1-emilne@redhat.com
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The current behavior of the SCSI core is to clear driver-private data
before preparing a request for submission to the SCSI LLD. Make it possible
for SCSI LLDs to disable clearing of driver-private data.
These hooks will be used by a later patch, namely "scsi: ufs: Let the SCSI
core allocate per-command UFS data".
Link: https://lore.kernel.org/r/20200123035637.21848-2-bvanassche@acm.org
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Stanley Chu <stanley.chu@mediatek.com>
Cc: Bean Huo <beanhuo@micron.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: Can Guo <cang@codeaurora.org>
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Johannes Thumshirn <jth@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Remove cmd_list functionality; no users left. With that the
scsi_put_command() becomes empty, so remove that one, too.
Link: https://lore.kernel.org/r/20200228075318.91255-14-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Add helper functions to call scsi_internal_device_block()/
scsi_internal_device_unblock() for all attached devices on a SCSI host.
Link: https://lore.kernel.org/r/20200228075318.91255-9-hare@suse.de
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFS JEDEC standards require DBD field to be set to 1 in mode sense
command. This patch allows LLD to define the setting of DBD, if
required.
Link: https://lore.kernel.org/r/0101016ed3d643f9-ffd45d6c-c593-4a13-a18f-a32da3d3bb97-000000@us-west-2.amazonses.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: aacraid, ufs, zfcp,
NCR5380, lpfc, qla2xxx, smartpqi, hisi_sas, target, mpt3sas, pm80xx
plus a whole load of minor updates and fixes.
The major core changes are Al Viro's reworking of sg's handling of
copy to/from user, Ming Lei's removal of the host busy counter to
avoid contention in the multiqueue case and Damien Le Moal's fixing of
residual tracking across error handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (251 commits)
scsi: bnx2fc: timeout calculation invalid for bnx2fc_eh_abort()
scsi: target: core: Fix a pr_debug() argument
scsi: iscsi: Don't send data to unbound connection
scsi: target: iscsi: Wait for all commands to finish before freeing a session
scsi: target: core: Release SPC-2 reservations when closing a session
scsi: target: core: Document target_cmd_size_check()
scsi: bnx2i: fix potential use after free
Revert "scsi: qla2xxx: Fix memory leak when sending I/O fails"
scsi: NCR5380: Add disconnect_mask module parameter
scsi: NCR5380: Unconditionally clear ICR after do_abort()
scsi: NCR5380: Call scsi_set_resid() on command completion
scsi: scsi_debug: num_tgts must be >= 0
scsi: lpfc: use hdwq assigned cpu for allocation
scsi: arcmsr: fix indentation issues
scsi: qla4xxx: fix double free bug
scsi: pm80xx: Modified the logic to collect fatal dump
scsi: pm80xx: Tie the interrupt name to the module instance
scsi: pm80xx: Controller fatal error through sysfs
scsi: pm80xx: Do not request 12G sas speeds
scsi: pm80xx: Cleanup command when a reset times out
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three small changes: two in the core and one in the qla2xxx driver.
The sg_tablesize fix affects a thinko in the migration to blk-mq of
certain legacy drivers which could cause an oops and the sd core
change should only affect zoned block devices which were wrongly
suppressing error messages for reset all zones"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: core: Handle drivers which set sg_tablesize to zero
scsi: qla2xxx: fix NPIV tear down process
scsi: sd_zbc: Fix sd_zbc_complete()
|
|
In scsi_mq_setup_tags(), cmd_size is calculated based on zero size for the
scatter-gather list in case the low level driver uses SG_NONE in its host
template.
cmd_size is passed on to the block layer for calculation of the request
size, and we've seen NULL pointer dereference errors from the block layer
in drivers where SG_NONE is used and a mq IO scheduler is active,
apparently as a consequence of this (see commit 68ab2d76e4be ("scsi:
cxlflash: Set sg_tablesize to 1 instead of SG_NONE"), and a recent patch by
Finn Thain converting the three m68k NFR5380 drivers to avoid setting
SG_NONE).
Try to avoid these errors by accounting for at least one sg list entry when
calculating cmd_size, regardless of whether the low level driver set a zero
sg_tablesize.
Tested on 030 m68k with the atari_scsi driver - setting sg_tablesize to
SG_NONE no longer results in a crash when loading this driver.
CC: Finn Thain <fthain@telegraphics.com.au>
Link: https://lore.kernel.org/r/1572922150-4358-1-git-send-email-schmitzmic@gmail.com
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
It isn't necessary to check the host depth in scsi_queue_rq() any more
since it has been respected by blk-mq before calling scsi_queue_rq() via
getting driver tag.
Lots of LUNs may attach to same host and per-host IOPS may reach millions,
so we should avoid expensive atomic operations on the host-wide counter in
the IO path.
This patch implements scsi_host_busy() via blk_mq_tagset_busy_iter() with
one scsi command state for reading the count of busy IOs for scsi_mq.
It is observed that IOPS is increased by 15% in IO test on scsi_debug (32
LUNs, 32 submit queues, 1024 can_queue, libaio/dio) in a dual-socket
system.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Omar Sandoval <osandov@fb.com>,
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>,
Cc: James Bottomley <james.bottomley@hansenpartnership.com>,
Cc: Christoph Hellwig <hch@lst.de>,
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20191025065855.6309-1-ming.lei@redhat.com
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This was missing from scsi_device_from_queue() due to the introduction of
another new scsi_mq_ops_no_commit of linux-next commit 8930a6c20791 ("scsi:
core: add support for request batching") from Martin's scsi/5.4/scsi-queue
or James' scsi/misc.
Only devicehandler code seems to call scsi_device_from_queue():
*** drivers/scsi/scsi_dh.c:
scsi_dh_activate[255] sdev = scsi_device_from_queue(q);
scsi_dh_set_params[302] sdev = scsi_device_from_queue(q);
scsi_dh_attach[325] sdev = scsi_device_from_queue(q);
scsi_dh_attached_handler_name[363] sdev = scsi_device_from_queue(q);
Fixes multipath tools follow-on errors:
$ multipath -v6
...
libdevmapper: ioctl/libdm-iface.c(1887): device-mapper: reload ioctl on mpatha failed: No such device
...
mpatha: failed to load map, error 19
...
showing also as kernel messages:
device-mapper: table: 252:0: multipath: error attaching hardware handler
device-mapper: ioctl: error adding target to table
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: 8930a6c20791 ("scsi: core: add support for request batching")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This was missing from scsi_mq_ops_no_commit of linux-next commit
8930a6c20791 ("scsi: core: add support for request batching") from Martin's
scsi/5.4/scsi-queue or James' scsi/misc.
See also linux-next commit b7e9e1fb7a92 ("scsi: implement .cleanup_rq
callback") from block/for-next.
Signed-off-by: Steffen Maier <maier@linux.ibm.com>
Fixes: 8930a6c20791 ("scsi: core: add support for request batching")
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: qla2xxx, ufs, smartpqi,
lpfc, hisi_sas, qedf, mpt3sas; plus a whole load of minor updates. The
only core change this time around is the addition of request batching
for virtio. Since batching requires an additional flag to use, it
should be invisible to the rest of the drivers"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (264 commits)
scsi: hisi_sas: Fix the conflict between device gone and host reset
scsi: hisi_sas: Add BIST support for phy loopback
scsi: hisi_sas: Add hisi_sas_debugfs_alloc() to centralise allocation
scsi: hisi_sas: Remove some unused function arguments
scsi: hisi_sas: Remove redundant work declaration
scsi: hisi_sas: Remove hisi_sas_hw.slot_complete
scsi: hisi_sas: Assign NCQ tag for all NCQ commands
scsi: hisi_sas: Update all the registers after suspend and resume
scsi: hisi_sas: Retry 3 times TMF IO for SAS disks when init device
scsi: hisi_sas: Remove sleep after issue phy reset if sas_smp_phy_control() fails
scsi: hisi_sas: Directly return when running I_T_nexus reset if phy disabled
scsi: hisi_sas: Use true/false as input parameter of sas_phy_reset()
scsi: hisi_sas: add debugfs auto-trigger for internal abort time out
scsi: virtio_scsi: unplug LUNs when events missed
scsi: scsi_dh_rdac: zero cdb in send_mode_select()
scsi: fcoe: fix null-ptr-deref Read in fc_release_transport
scsi: ufs-hisi: use devm_platform_ioremap_resource() to simplify code
scsi: ufshcd: use devm_platform_ioremap_resource() to simplify code
scsi: hisi_sas: use devm_platform_ioremap_resource() to simplify code
scsi: ufs: Use kmemdup in ufshcd_read_string_desc()
...
|
|
If scsi_target_block() fails that can break the code that calls this
function. Hence complain loudly if scsi_target_block() fails.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The only 'new_state' values passed by upstream kernel code to
scsi_internal_device_unblock_nowait() are SDEV_RUNNING and
SDEV_TRANSPORT_OFFLINE. These are the only values that should be passed to
this function. Hence check the value of the 'new_state' argument to avoid
that scsi_internal_device_unblock_nowait() would be used to trigger an
illegal SCSI device state transition. In this context 'illegal' means not
allowed by scsi_device_set_state().
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Implement .cleanup_rq() callback for freeing driver private part
of the request. Then we can avoid to leak this part if the request isn't
completed by SCSI, and freed by blk-mq or upper layer(such as dm-rq) finally.
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: <stable@vger.kernel.org>
Fixes: 396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We should only call dma_max_mapping_size for devices that have a DMA mask
set, otherwise we can run into a NULL pointer dereference that will crash
the system.
Also we need to do right shift to get the sectors from the size in bytes,
not a left shift.
Fixes: bdd17bdef7d8 ("scsi: core: take the DMA max mapping size into account")
Reported-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Ming Lei <tom.leiming@gmail.com>
Tested-by: Guilherme G. Piccoli <gpiccoli@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This allows a list of requests to be issued, with the LLD only writing the
hardware doorbell when necessary, after the last request was prepared.
This is more efficient if we have lists of requests to issue, particularly
on virtualized hardware, where writing the doorbell is more expensive than
on real hardware.
The use case for this is plugged IO, where blk-mq flushes a batch of
requests all at once.
The API is the same as for blk-mq, just with blk-mq concepts tweaked to
fit the SCSI subsystem API: the "last" flag in blk_mq_queue_data becomes a
flag in scsi_cmnd, while the queue_num in the commit_rqs callback is
extracted from the hctx and passed as a parameter.
The only complication is that blk-mq uses different plugging heuristics
depending on whether commit_rqs is present or not. So we have two
different sets of blk_mq_ops and pick one depending on whether the
scsi_host template uses commit_rqs or not.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is the final round of mostly small fixes in our initial submit.
It's mostly minor fixes and driver updates. The only change of note is
adding a virt_boundary_mask to the SCSI host and host template to
parametrise this for NVMe devices instead of having them do a call in
slave_alloc. It's a fairly straightforward conversion except in the
two NVMe handling drivers that didn't set it who now have a virtual
infinity parameter added"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (24 commits)
scsi: megaraid_sas: set an unlimited max_segment_size
scsi: mpt3sas: set an unlimited max_segment_size for SAS 3.0 HBAs
scsi: IB/srp: set virt_boundary_mask in the scsi host
scsi: IB/iser: set virt_boundary_mask in the scsi host
scsi: storvsc: set virt_boundary_mask in the scsi host template
scsi: ufshcd: set max_segment_size in the scsi host template
scsi: core: take the DMA max mapping size into account
scsi: core: add a host / host template field for the virt boundary
scsi: core: Fix race on creating sense cache
scsi: sd_zbc: Fix compilation warning
scsi: libfc: fix null pointer dereference on a null lport
scsi: zfcp: fix GCC compiler warning emitted with -Wmaybe-uninitialized
scsi: zfcp: fix request object use-after-free in send path causing wrong traces
scsi: zfcp: fix request object use-after-free in send path causing seqno errors
scsi: megaraid_sas: Update driver version to 07.710.50.00
scsi: megaraid_sas: Add module parameter for FW Async event logging
scsi: megaraid_sas: Enable msix_load_balance for Invader and later controllers
scsi: megaraid_sas: Fix calculation of target ID
scsi: lpfc: reduce stack size with CONFIG_GCC_PLUGIN_STRUCTLEAK_VERBOSE
scsi: devinfo: BLIST_TRY_VPD_PAGES for SanDisk Cruzer Blade
...
|
|
We need to limit the device's max_sectors to what the DMA mapping
implementation can support. If not, we risk running out of swiotlb
buffers easily.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This allows drivers setting it up easily instead of branching out to block
layer calls in slave_alloc, and ensures the upgraded max_segment_size
setting gets picked up by the DMA layer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Kashyap Desai < kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
When scsi_init_sense_cache(host) is called concurrently from different
hosts, each code path may find that no cache has been created and
allocate a new one. The lack of locking can lead to potentially
overriding a cache allocated by a different host.
Fix the issue by moving 'mutex_lock(&scsi_sense_cache_mutex)' before
scsi_select_sense_cache().
Fixes: 0a6ac4ee7c21 ("scsi: respect unchecked_isa_dma for blk-mq")
Cc: Stable <stable@vger.kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
With a possibly faulty disk the following messages may appear in the logs:
kernel: sd 0:0:9:0: timing out command, waited 180s
kernel: sd 0:0:9:0: timing out command, waited 20s
kernel: sd 0:0:9:0: timing out command, waited 20s
kernel: sd 0:0:9:0: timing out command, waited 60s
kernel: sd 0:0:9:0: timing out command, waited 20s
This is not very informative because it's not possible to identify the
command that timed out.
This patch replaces sdev_printk() with scmd_printk().
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull SCSI scatter-gather list updates from James Bottomley:
"This topic branch covers a fundamental change in how our sg lists are
allocated to make mq more efficient by reducing the size of the
preallocated sg list.
This necessitates a large number of driver changes because the
previous guarantee that if a driver specified SG_ALL as the size of
its scatter list, it would get a non-chained list and didn't need to
bother with scatterlist iterators is now broken and every driver
*must* use scatterlist iterators.
This was broken out as a separate topic because we need to convert all
the drivers before pulling the trigger and unconverted drivers kept
being found, necessitating a rebase"
* tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: core: don't preallocate small SGL in case of NO_SG_CHAIN
scsi: lib/sg_pool.c: clear 'first_chunk' in case of no preallocation
scsi: core: avoid preallocating big SGL for data
scsi: core: avoid preallocating big SGL for protection information
scsi: lib/sg_pool.c: improve APIs for allocating sg pool
scsi: esp: use sg helper to iterate over scatterlist
scsi: NCR5380: use sg helper to iterate over scatterlist
scsi: wd33c93: use sg helper to iterate over scatterlist
scsi: ppa: use sg helper to iterate over scatterlist
scsi: pcmcia: nsp_cs: use sg helper to iterate over scatterlist
scsi: imm: use sg helper to iterate over scatterlist
scsi: aha152x: use sg helper to iterate over scatterlist
scsi: s390: zfcp_fc: use sg helper to iterate over scatterlist
scsi: staging: unisys: visorhba: use sg helper to iterate over scatterlist
scsi: usb: image: microtek: use sg helper to iterate over scatterlist
scsi: pmcraid: use sg helper to iterate over scatterlist
scsi: ipr: use sg helper to iterate over scatterlist
scsi: mvumi: use sg helper to iterate over scatterlist
scsi: lpfc: use sg helper to iterate over scatterlist
scsi: advansys: use sg helper to iterate over scatterlist
...
|
|
Pull SCSI updates from James Bottomley:
"This is mostly update of the usual drivers: qla2xxx, hpsa, lpfc, ufs,
mpt3sas, ibmvscsi, megaraid_sas, bnx2fc and hisi_sas as well as the
removal of the osst driver (I heard from Willem privately that he
would like the driver removed because all his test hardware has
failed). Plus number of minor changes, spelling fixes and other
trivia.
The big merge conflict this time around is the SPDX licence tags.
Following discussion on linux-next, we believe our version to be more
accurate than the one in the tree, so the resolution is to take our
version for all the SPDX conflicts"
Note on the SPDX license tag conversion conflicts: the SCSI tree had
done its own SPDX conversion, which in some cases conflicted with the
treewide ones done by Thomas & co.
In almost all cases, the conflicts were purely syntactic: the SCSI tree
used the old-style SPDX tags ("GPL-2.0" and "GPL-2.0+") while the
treewide conversion had used the new-style ones ("GPL-2.0-only" and
"GPL-2.0-or-later").
In these cases I picked the new-style one.
In a few cases, the SPDX conversion was actually different, though. As
explained by James above, and in more detail in a pre-pull-request
thread:
"The other problem is actually substantive: In the libsas code Luben
Tuikov originally specified gpl 2.0 only by dint of stating:
* This file is licensed under GPLv2.
In all the libsas files, but then muddied the water by quoting GPLv2
verbatim (which includes the or later than language). So for these
files Christoph did the conversion to v2 only SPDX tags and Thomas
converted to v2 or later tags"
So in those cases, where the spdx tag substantially mattered, I took the
SCSI tree conversion of it, but then also took the opportunity to turn
the old-style "GPL-2.0" into a new-style "GPL-2.0-only" tag.
Similarly, when there were whitespace differences or other differences
to the comments around the copyright notices, I took the version from
the SCSI tree as being the more specific conversion.
Finally, in the spdx conversions that had no conflicts (because the
treewide ones hadn't been done for those files), I just took the SCSI
tree version as-is, even if it was old-style. The old-style conversions
are perfectly valid, even if the "-only" and "-or-later" versions are
perhaps more descriptive.
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (185 commits)
scsi: qla2xxx: move IO flush to the front of NVME rport unregistration
scsi: qla2xxx: Fix NVME cmd and LS cmd timeout race condition
scsi: qla2xxx: on session delete, return nvme cmd
scsi: qla2xxx: Fix kernel crash after disconnecting NVMe devices
scsi: megaraid_sas: Update driver version to 07.710.06.00-rc1
scsi: megaraid_sas: Introduce various Aero performance modes
scsi: megaraid_sas: Use high IOPS queues based on IO workload
scsi: megaraid_sas: Set affinity for high IOPS reply queues
scsi: megaraid_sas: Enable coalescing for high IOPS queues
scsi: megaraid_sas: Add support for High IOPS queues
scsi: megaraid_sas: Add support for MPI toolbox commands
scsi: megaraid_sas: Offload Aero RAID5/6 division calculations to driver
scsi: megaraid_sas: RAID1 PCI bandwidth limit algorithm is applicable for only Ventura
scsi: megaraid_sas: megaraid_sas: Add check for count returned by HOST_DEVICE_LIST DCMD
scsi: megaraid_sas: Handle sequence JBOD map failure at driver level
scsi: megaraid_sas: Don't send FPIO to RL Bypass queue
scsi: megaraid_sas: In probe context, retry IOC INIT once if firmware is in fault
scsi: megaraid_sas: Release Mutex lock before OCR in case of DCMD timeout
scsi: megaraid_sas: Call disable_irq from process IRQ poll
scsi: megaraid_sas: Remove few debug counters from IO path
...
|
|
|
|
Several SCSI transport and LLD drivers surround code that does not
tolerate concurrent calls of .queuecommand() with scsi_target_block() /
scsi_target_unblock(). These last two functions use
blk_mq_quiesce_queue() / blk_mq_unquiesce_queue() for scsi-mq request
queues to prevent concurrent .queuecommand() calls. However, that is
not sufficient to prevent .queuecommand() calls from scsi_send_eh_cmnd().
Hence surround the .queuecommand() call from the SCSI error handler with
code that avoids that .queuecommand() gets called in the blocked state.
Note: converting the .queuecommand() call in scsi_send_eh_cmnd() into
code that calls blk_get_request() + blk_execute_rq() is not an option
since scsi_send_eh_cmnd() must be able to make forward progress even
if all requests have been allocated.
Cc: Ming Lei <ming.lei@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The preallocated small SGL depends on SG_CHAIN so if the ARCH doesn't
support SG_CHAIN, preallocation of small SGL can't work at all.
Fix this issue by not using small preallocation in case of NO_SG_CHAIN.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_mq_setup_tags() preallocates a big buffer for the IO SGL. The size is
based on scsi_mq_sgl_size() which is determined based on
shost->sg_tablesize and SG_CHUNK_SIZE.
Modern DMA engines are often capable of dealing with very big segments so
the resulting scsi_mq_sgl_size() is often too big. SG_CHUNK_SIZE results in
a static 4KB SGL allocation per command.
If an HBA has lots of deep queues, preallocation for the sg list can
consume substantial amounts of memory. For lpfc, nr_hw_queues can be 70
and each queue's depth 3781. This means the resulting preallocation for
the data SGL is 70*3781*2K = 517MB.
Switch to runtime allocation for SGL for lists longer than 2 entries. This
is the approach used by NVMe PCI so it should be reasonable for SCSI as
well. Runtime SGL allocation has always been the case for the legacy I/O
path so this is nothing new.
[mkp: attempted to clarify commit desc]
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
scsi_mq_setup_tags() currently preallocates a big buffer for protection
SGL entries. scsi_mq_sgl_size() is used to determine the size for both data
and protection information scatterlists but the protection buffer is
usually much smaller. For example, one 512-byte sector needs 8 bytes of
protection information. Given that the maximum number of sectors for one
request is 2560 (BLK_DEF_MAX_SECTORS) sectors, the max protection
information buffer size is just 20K.
The protection information segment count generally matches the number of
bios in the request. As a result, the typical actual number of segments
won't be very big. And should the need arise, allocating a bigger SGL from
slab is fast enough.
Pre-allocate only one SGL entry for protection information and switch to
runtime allocation in case that the protection information segment number
is bigger than 1. This reduces memory tied up by static command
allocations. For example, 500+ MB is saved on single lpfc HBA.
[mkp: attempted to clarify commit desc]
Cc: Christoph Hellwig <hch@lst.de>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ewan D. Milne <emilne@redhat.com>
Cc: Hannes Reinecke <hare@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
Linus Torvalds
Ye Bin
Ming Lei
Christoph Hellwig
Bean Huo
Keith Busch
Johannes Thumshirn
André Almeida
Dexuan Cui
Douglas Anderson
Ewan D. Milne
Bart Van Assche
Hannes Reinecke
Can Guo
Michael Schmitz
Steffen Maier
Paolo Bonzini
Maurizio Lombardi
Martin K. Petersen